2009-Apr-18 19:40:11 BEGIN executive: CIMA executive starting ... 2009-Apr-18 19:40:11 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-18 19:40:11 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-18 19:40:11 INFO4 executive: This is an ON-LINE session 2009-Apr-18 19:40:11 INFO4 executive: This is a LOCAL session 2009-Apr-18 19:40:11 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-18 19:40:11 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2009-Apr-18 19:40:11 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090418' 2009-Apr-18 19:40:11 LOG2 log_preferences: Currently applied preferences: 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-18 19:40:11 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-18 19:40:11 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-18 19:40:11 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-18 19:40:11 ALERT executive: CIMA executive ready 2009-Apr-18 19:40:13 NOTE frontend: CIMA frontend ready 2009-Apr-18 19:40:16 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-18 19:40:16 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-18 19:40:16 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-18 19:40:16 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-18 19:40:16 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-18 19:40:16 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-18 19:40:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-18 19:40:16 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-18 19:40:16 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-18 19:40:16 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-18 19:40:16 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-18 19:40:16 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-18 19:40:16 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-18 19:40:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:40:16 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-18 19:40:16 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-18 19:40:16 LOG4 got_cormsg: From DATATAKING: vw% setup 2009-Apr-18 19:40:18 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-18 19:40:18 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-18 19:40:18 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-18 19:40:18 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-18 19:40:18 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-18 19:40:18 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-18 19:40:18 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-18 19:40:19 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-18 19:40:19 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-18 19:40:19 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-18 19:40:22 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-18 19:40:22 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-18 19:40:22 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-18 19:40:22 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-18 19:40:23 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-18 19:40:23 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:33 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-18 19:40:36 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-18 19:40:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-18 19:40:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-18 19:40:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-18 19:40:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-18 19:40:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-18 19:40:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-18 19:40:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-18 19:40:36 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-18 19:40:36 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-18 19:40:36 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-18 19:40:36 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-18 19:40:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-18 19:40:36 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-18 19:40:37 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-18 19:40:37 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-18 19:40:37 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-18 19:40:37 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-18 19:40:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-18 19:40:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-18 19:40:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-18 19:40:39 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-18 19:40:39 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-18 19:40:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-18 19:40:39 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-18 19:40:39 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-18 19:40:39 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-18 19:40:39 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-18 19:40:39 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-18 19:40:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-18 19:40:39 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-18 19:40:39 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-18 19:40:39 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-18 19:40:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:40:39 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-18 19:40:39 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-18 19:40:39 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-18 19:40:39 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-18 19:40:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-18 19:40:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:40:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:40:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:40:39 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:40:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:40:39 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-18 19:40:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:40:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-18 19:40:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-18 19:40:39 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-18 19:40:40 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-18 19:40:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-18 19:40:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:40:40 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-18 19:40:40 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-18 19:40:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:40:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:40:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-18 19:40:56 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-18 19:40:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-18 19:40:56 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-18 19:40:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:40:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-18 19:40:56 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-18 19:40:56 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-18 19:40:56 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-18 19:40:56 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-18 19:40:56 START begin_task: Starting task 'selecting calibration port' 2009-Apr-18 19:40:56 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-18 19:40:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-18 19:40:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:40:56 START begin_task: Starting task 'waiting on calport' 2009-Apr-18 19:40:56 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:40:56 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-18 19:40:56 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-18 19:40:56 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-18 19:40:56 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 19:40:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 19:40:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:40:56 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:40:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:40:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:40:56 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-18 19:40:56 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-18 19:40:57 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-18 19:40:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:40:57 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-18 19:40:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:40:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:40:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:40:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:40:57 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 19:40:57 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-18 19:40:57 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-18 19:40:57 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-18 19:40:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:40:57 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-18 19:40:57 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-18 19:40:57 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-18 19:40:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-18 19:40:57 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-18 19:40:57 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-18 19:40:57 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-18 19:40:57 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-18 19:40:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-18 19:40:58 LOG3 track_source: Calling 'track_source galfasrc 090400.0 +214642 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-18 19:40:58 START begin_task: Starting task 'sending tracking commands' 2009-Apr-18 19:40:58 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-18 19:40:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-18 19:40:58 INFO1 track_source: Starting to track galfasrc 2009-Apr-18 19:40:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-18 19:40:58 LOG3 vw_send: To DATATAKING: set ra 090400.0 2009-Apr-18 19:40:58 LOG3 vw_send: To DATATAKING: set dec +214642 2009-Apr-18 19:40:58 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-18 19:40:58 LOG3 vw_send: To DATATAKING: pnt tr 090400.0 +214642 -CJ 2009-Apr-18 19:40:58 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-18 19:40:58 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-18 19:40:58 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-18 19:40:58 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-18 19:40:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:40:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-18 19:40:58 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-18 19:40:58 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-18 19:40:58 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-18 19:40:58 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-18 19:40:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:40:58 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-18 19:40:58 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-18 19:40:58 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-18 19:40:58 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-18 19:40:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-18 19:40:58 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-18 19:40:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-18 19:40:58 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-18 19:40:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-18 19:40:58 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-18 19:40:58 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-18 19:40:58 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-18 19:40:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 19:40:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20090418.a2010.0015.fits 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-18 19:40:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-18 19:40:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-18 19:40:58 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090418.a2010.0015.fits} 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: set ra 090400.0 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: set dec +214642 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: vw% 090400.0 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: vw% +214642 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: pnt tr 090400.0 +214642 -CJ 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-18 19:40:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:40:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 19:41:05 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-18 19:41:05 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-18 19:41:05 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-18 19:41:05 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-18 19:41:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-18 19:41:05 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-18 19:41:05 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-18 19:41:05 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-18 19:41:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:41:06 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-18 19:41:06 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-18 19:41:06 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-18 19:41:06 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-18 19:41:06 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-18 19:41:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-18 19:41:06 LOG3 waittrk: Start waittrk 5 2009-Apr-18 19:41:06 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-18 19:41:06 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-18 19:41:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-18 19:41:11 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-18 19:41:11 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-18 19:41:11 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-18 19:41:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-18 19:41:23 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-18 19:41:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-18 19:41:23 INFO2 waittrk: Now tracking galfasrc 2009-Apr-18 19:41:23 LOG4 waittrk: Current telescope position: Az = 184.86 ZA = 3.42 2009-Apr-18 19:41:23 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-18 19:41:23 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-18 19:41:23 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-18 19:41:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:41:23 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-18 19:41:23 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-18 19:41:23 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-18 19:41:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-18 19:41:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-18 19:41:24 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-18 19:41:24 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-18 19:41:24 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-18 19:41:24 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-18 19:41:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-18 19:41:24 START begin_task: Starting task 'selecting calibration type' 2009-Apr-18 19:41:24 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-18 19:41:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-18 19:41:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:41:24 START begin_task: Starting task 'waiting on setcal' 2009-Apr-18 19:41:24 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-18 19:41:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:41:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:24 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:41:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-18 19:41:24 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-18 19:41:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:41:24 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-18 19:41:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:41:24 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:41:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:41:24 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:41:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-18 19:41:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:41:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:41:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:41:24 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:41:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:41:24 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:41:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:41:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-18 19:41:24 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 19:41:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 19:41:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 19:41:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 19:41:24 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090418.a2010.0015.fits' is empty! 2009-Apr-18 19:41:24 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-18 19:41:24 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-18 19:41:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-18 19:41:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 19:41:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 19:41:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:41:24 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:41:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:41:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:41:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:41:24 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-18 19:41:24 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-18 19:41:25 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-18 19:41:25 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-18 19:41:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-18 19:41:25 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-18 19:41:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-18 19:41:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-18 19:41:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:41:25 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-18 19:41:25 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-18 19:41:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-18 19:41:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:41:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 19:41:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:28 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:41:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-18 19:41:28 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-18 19:41:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-18 19:41:28 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-18 19:41:28 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-18 19:41:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-18 19:41:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:41:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:41:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:41:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:41:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-18 19:41:28 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-18 19:41:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-18 19:41:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-18 19:41:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-18 19:41:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-18 19:41:28 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-18 19:41:28 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-18 19:41:28 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-18 19:41:28 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-18 19:41:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.050 0.916 ALFA beam 1: 1.088 1.079 2009-Apr-18 19:41:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.001 0.961 ALFA beam 3: 1.085 1.072 2009-Apr-18 19:41:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.085 0.922 ALFA beam 5: 1.069 0.950 2009-Apr-18 19:41:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.916 0.104 ALFA beam 7: 1.023 0.129 2009-Apr-18 19:41:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-18 19:41:28 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-18 19:41:28 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-18 19:41:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:41:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-18 19:41:28 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-18 19:41:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-18 19:41:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-18 19:41:29 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-18 19:41:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-18 19:41:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:41:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-18 19:41:29 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-18 19:41:29 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-18 19:41:29 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-18 19:41:29 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-18 19:41:29 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:41:29 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29793 J 2009-Apr-18 19:41:29 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:41:29 LOG2 antvel: Parameters to Doppler: Topocentric 85288 2009 108 0.0 2009-Apr-18 19:41:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:41:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-18 19:41:29 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-18 19:41:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:41:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:41:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:41:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:41:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-18 19:41:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:41:29 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-18 19:41:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-18 19:41:29 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.055230 2009.2979341901791 18.999933 2009-Apr-18 19:41:29 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666555 21.778333333333343 2009-Apr-18 19:41:29 LOG4 log_alfabeam: ALFABEAM 1 9.067239714747585 21.672527449527657 2009-Apr-18 19:41:29 LOG4 log_alfabeam: ALFABEAM 2 9.072566138738752 21.735393101177173 2009-Apr-18 19:41:29 LOG4 log_alfabeam: ALFABEAM 3 9.072125308223164 21.841380805348962 2009-Apr-18 19:41:29 LOG4 log_alfabeam: ALFABEAM 4 9.066015403262027 21.884140376695864 2009-Apr-18 19:41:29 LOG4 log_alfabeam: ALFABEAM 5 9.060624231509085 21.819187662562232 2009-Apr-18 19:41:29 LOG4 log_alfabeam: ALFABEAM 6 9.061407237279896 21.713613924798395 2009-Apr-18 19:41:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800301 2009-Apr-18 19:41:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:41:29 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-18 19:41:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:41:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:41:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:41:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-18 19:41:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85290.00 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:41:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-18 19:41:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.916 1.088 1.079 2009-Apr-18 19:41:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.961 1.085 1.072 2009-Apr-18 19:41:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.922 1.069 0.950 2009-Apr-18 19:41:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.104 1.023 0.129 2009-Apr-18 19:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.153 (still bad) 2009-Apr-18 19:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.154 (still bad) 2009-Apr-18 19:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.154 (still bad) 2009-Apr-18 19:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.153 (still bad) 2009-Apr-18 19:41:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:41:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:41:40 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-18 19:41:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:41:40 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-18 19:41:40 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-18 19:41:40 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-18 19:41:40 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-18 19:41:40 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:41:40 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29793 J 2009-Apr-18 19:41:40 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:41:40 LOG2 antvel: Parameters to Doppler: Topocentric 85299 2009 108 0.0 2009-Apr-18 19:41:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:41:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-18 19:41:40 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-18 19:41:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:41:40 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:41:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:41:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-18 19:41:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:41:40 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-18 19:41:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-18 19:41:40 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.058294 2009.2979345387482 18.999933 2009-Apr-18 19:41:40 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666555 21.778333333333343 2009-Apr-18 19:41:40 LOG4 log_alfabeam: ALFABEAM 1 9.067336844673465 21.672638353258343 2009-Apr-18 19:41:40 LOG4 log_alfabeam: ALFABEAM 2 9.072605078281475 21.736448120272147 2009-Apr-18 19:41:40 LOG4 log_alfabeam: ALFABEAM 3 9.072066978444315 21.842348660898413 2009-Apr-18 19:41:40 LOG4 log_alfabeam: ALFABEAM 4 9.065918059038099 21.884015494049311 2009-Apr-18 19:41:40 LOG4 log_alfabeam: ALFABEAM 5 9.060587107692520 21.818105262821511 2009-Apr-18 19:41:40 LOG4 log_alfabeam: ALFABEAM 6 9.061467264847256 21.712680157816212 2009-Apr-18 19:41:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800302 2009-Apr-18 19:41:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:41:41 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-18 19:41:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:41:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-18 19:41:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85302.00 2009-Apr-18 19:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.155 (still bad) 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-18 19:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-18 19:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-18 19:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-18 19:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-18 19:41:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:41:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:41:52 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-18 19:41:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:41:52 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-18 19:41:52 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-18 19:41:52 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-18 19:41:52 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-18 19:41:52 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:41:52 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29793 J 2009-Apr-18 19:41:52 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:41:52 LOG2 antvel: Parameters to Doppler: Topocentric 85312 2009 108 0.0 2009-Apr-18 19:41:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:41:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-18 19:41:52 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-18 19:41:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:41:52 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:41:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:41:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:41:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-18 19:41:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:41:52 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-18 19:41:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-18 19:41:52 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.061915 2009.2979349506934 18.999933 2009-Apr-18 19:41:52 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666571 21.778333333333329 2009-Apr-18 19:41:52 LOG4 log_alfabeam: ALFABEAM 1 9.067451719998642 21.672792060277352 2009-Apr-18 19:41:52 LOG4 log_alfabeam: ALFABEAM 2 9.072649943768159 21.737706409964613 2009-Apr-18 19:41:52 LOG4 log_alfabeam: ALFABEAM 3 9.071996746088722 21.843481305997852 2009-Apr-18 19:41:52 LOG4 log_alfabeam: ALFABEAM 4 9.065802963392962 21.883845175266408 2009-Apr-18 19:41:52 LOG4 log_alfabeam: ALFABEAM 5 9.060544457311510 21.816815378339022 2009-Apr-18 19:41:52 LOG4 log_alfabeam: ALFABEAM 6 9.061539424485657 21.711588632958669 2009-Apr-18 19:41:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800303 2009-Apr-18 19:41:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:41:53 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-18 19:41:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:41:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:41:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:41:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:41:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-18 19:41:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85314.00 2009-Apr-18 19:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-18 19:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-18 19:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-18 19:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-18 19:42:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:42:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:42:04 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-18 19:42:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:42:04 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-18 19:42:04 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-18 19:42:04 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-18 19:42:04 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-18 19:42:04 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:42:04 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:42:04 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:42:04 LOG2 antvel: Parameters to Doppler: Topocentric 85324 2009 108 0.0 2009-Apr-18 19:42:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:42:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-18 19:42:04 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-18 19:42:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:42:04 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:42:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:42:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-18 19:42:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:42:04 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-18 19:42:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-18 19:42:04 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.065258 2009.2979353309504 18.999933 2009-Apr-18 19:42:04 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666409 21.778333333333329 2009-Apr-18 19:42:04 LOG4 log_alfabeam: ALFABEAM 1 9.067557797068641 21.672955776115458 2009-Apr-18 19:42:04 LOG4 log_alfabeam: ALFABEAM 2 9.072690224502146 21.738878500206408 2009-Apr-18 19:42:04 LOG4 log_alfabeam: ALFABEAM 3 9.071930688684429 21.844515563394101 2009-Apr-18 19:42:04 LOG4 log_alfabeam: ALFABEAM 4 9.065696715007235 21.883666052938555 2009-Apr-18 19:42:04 LOG4 log_alfabeam: ALFABEAM 5 9.060506286152682 21.815614892237637 2009-Apr-18 19:42:04 LOG4 log_alfabeam: ALFABEAM 6 9.061607182536886 21.710593100076437 2009-Apr-18 19:42:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800304 2009-Apr-18 19:42:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:42:05 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-18 19:42:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:42:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-18 19:42:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-18 19:42:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85326.00 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:42:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 19:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 19:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 19:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-18 19:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-18 19:42:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:42:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:42:16 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-18 19:42:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:42:16 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-18 19:42:16 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-18 19:42:16 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-18 19:42:16 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-18 19:42:16 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:42:16 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:42:16 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:42:16 LOG2 antvel: Parameters to Doppler: Topocentric 85336 2009 108 0.0 2009-Apr-18 19:42:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:42:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-18 19:42:16 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-18 19:42:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:42:16 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:42:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:42:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-18 19:42:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:42:16 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-18 19:42:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-18 19:42:16 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.068600 2009.2979357112074 18.999933 2009-Apr-18 19:42:16 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666595 21.778333333333340 2009-Apr-18 19:42:16 LOG4 log_alfabeam: ALFABEAM 1 9.067663799615119 21.673140368525321 2009-Apr-18 19:42:16 LOG4 log_alfabeam: ALFABEAM 2 9.072729369656367 21.740059576601812 2009-Apr-18 19:42:16 LOG4 log_alfabeam: ALFABEAM 3 9.071863516977666 21.845537867705506 2009-Apr-18 19:42:16 LOG4 log_alfabeam: ALFABEAM 4 9.065590572330182 21.883466009469689 2009-Apr-18 19:42:16 LOG4 log_alfabeam: ALFABEAM 5 9.060469309621414 21.814406207584614 2009-Apr-18 19:42:16 LOG4 log_alfabeam: ALFABEAM 6 9.061675976534950 21.709610196216790 2009-Apr-18 19:42:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800305 2009-Apr-18 19:42:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:42:17 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-18 19:42:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:42:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:42:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 19:42:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-18 19:42:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85338.00 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:42:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:42:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:42:28 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-18 19:42:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:42:28 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-18 19:42:28 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-18 19:42:28 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-18 19:42:28 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-18 19:42:28 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:42:28 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:42:28 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:42:28 LOG2 antvel: Parameters to Doppler: Topocentric 85348 2009 108 0.0 2009-Apr-18 19:42:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:42:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-18 19:42:28 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-18 19:42:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:42:28 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:42:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:42:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-18 19:42:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:42:28 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-18 19:42:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-18 19:42:28 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.071943 2009.2979360914644 18.999933 2009-Apr-18 19:42:28 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666222 21.778333333333329 2009-Apr-18 19:42:28 LOG4 log_alfabeam: ALFABEAM 1 9.067769729434069 21.673345907272456 2009-Apr-18 19:42:28 LOG4 log_alfabeam: ALFABEAM 2 9.072767375981895 21.741249695925632 2009-Apr-18 19:42:28 LOG4 log_alfabeam: ALFABEAM 3 9.071795225925140 21.846548191218641 2009-Apr-18 19:42:28 LOG4 log_alfabeam: ALFABEAM 4 9.065484533739037 21.883244983646325 2009-Apr-18 19:42:28 LOG4 log_alfabeam: ALFABEAM 5 9.060433529931379 21.813189285476373 2009-Apr-18 19:42:28 LOG4 log_alfabeam: ALFABEAM 6 9.061745810377273 21.708639928970825 2009-Apr-18 19:42:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800306 2009-Apr-18 19:42:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:42:29 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-18 19:42:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:42:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:42:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-18 19:42:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85350.00 2009-Apr-18 19:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:42:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:42:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:42:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 0.910 1.081 1.074 2009-Apr-18 19:42:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.954 1.091 1.088 2009-Apr-18 19:42:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.940 1.056 0.957 2009-Apr-18 19:42:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.106 1.030 0.132 2009-Apr-18 19:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:42:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:42:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:42:40 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-18 19:42:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:42:40 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-18 19:42:40 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-18 19:42:40 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-18 19:42:40 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-18 19:42:40 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:42:40 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:42:40 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:42:40 LOG2 antvel: Parameters to Doppler: Topocentric 85360 2009 108 0.0 2009-Apr-18 19:42:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:42:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-18 19:42:40 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-18 19:42:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:42:40 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:42:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:42:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-18 19:42:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:42:40 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-18 19:42:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-18 19:42:40 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.075285 2009.2979364717214 18.999933 2009-Apr-18 19:42:40 LOG4 log_alfabeam: ALFABEAM 0 9.066666666663307 21.778333333333311 2009-Apr-18 19:42:40 LOG4 log_alfabeam: ALFABEAM 1 9.067875461556811 21.673572192597888 2009-Apr-18 19:42:40 LOG4 log_alfabeam: ALFABEAM 2 9.072804195980023 21.742447479605648 2009-Apr-18 19:42:40 LOG4 log_alfabeam: ALFABEAM 3 9.071725893530195 21.847545309647391 2009-Apr-18 19:42:40 LOG4 log_alfabeam: ALFABEAM 4 9.065378724455876 21.883003202414503 2009-Apr-18 19:42:40 LOG4 log_alfabeam: ALFABEAM 5 9.060398990762151 21.811965553123933 2009-Apr-18 19:42:40 LOG4 log_alfabeam: ALFABEAM 6 9.061816603200061 21.707683453342575 2009-Apr-18 19:42:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800307 2009-Apr-18 19:42:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:42:41 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-18 19:42:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:42:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:42:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-18 19:42:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85362.00 2009-Apr-18 19:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2009-Apr-18 19:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.088 (still bad) 2009-Apr-18 19:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.088 (still bad) 2009-Apr-18 19:42:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.088 (still bad) 2009-Apr-18 19:42:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:42:52 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-18 19:42:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:42:52 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-18 19:42:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-18 19:42:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-18 19:42:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-18 19:42:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:42:52 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-18 19:42:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:42:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-18 19:42:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:42:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:42:52 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-18 19:42:52 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-18 19:42:52 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-18 19:42:52 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-18 19:42:52 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:42:52 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:42:52 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:42:52 LOG2 antvel: Parameters to Doppler: Topocentric 85372 2009 108 0.0 2009-Apr-18 19:42:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:42:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-18 19:42:52 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-18 19:42:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:42:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:42:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:42:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-18 19:42:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:42:52 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-18 19:42:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-18 19:42:52 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.078628 2009.2979368519786 18.999933 2009-Apr-18 19:42:52 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666958 21.778333333333347 2009-Apr-18 19:42:52 LOG4 log_alfabeam: ALFABEAM 1 9.067980997834621 21.673819247082161 2009-Apr-18 19:42:52 LOG4 log_alfabeam: ALFABEAM 2 9.072839828888878 21.743652962688760 2009-Apr-18 19:42:52 LOG4 log_alfabeam: ALFABEAM 3 9.071655517363229 21.848529220914013 2009-Apr-18 19:42:52 LOG4 log_alfabeam: ALFABEAM 4 9.065273142690680 21.882740651910215 2009-Apr-18 19:42:52 LOG4 log_alfabeam: ALFABEAM 5 9.060365691628052 21.810734990660098 2009-Apr-18 19:42:52 LOG4 log_alfabeam: ALFABEAM 6 9.061888356552219 21.706740748931988 2009-Apr-18 19:42:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800308 2009-Apr-18 19:42:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:42:53 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-18 19:42:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:42:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:42:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:42:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:42:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-18 19:42:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85374.00 2009-Apr-18 19:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.610 (still bad) 2009-Apr-18 19:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.608 (still bad) 2009-Apr-18 19:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.609 (still bad) 2009-Apr-18 19:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.609 (still bad) 2009-Apr-18 19:43:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:43:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:43:04 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-18 19:43:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:43:04 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-18 19:43:04 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-18 19:43:04 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-18 19:43:04 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-18 19:43:04 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:43:04 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:43:04 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:43:04 LOG2 antvel: Parameters to Doppler: Topocentric 85384 2009 108 0.0 2009-Apr-18 19:43:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:43:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-18 19:43:04 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-18 19:43:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:43:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:43:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:43:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-18 19:43:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:43:04 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-18 19:43:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-18 19:43:04 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.081970 2009.2979372322357 18.999933 2009-Apr-18 19:43:04 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666924 21.778333333333332 2009-Apr-18 19:43:04 LOG4 log_alfabeam: ALFABEAM 1 9.068086214113807 21.674086774403442 2009-Apr-18 19:43:04 LOG4 log_alfabeam: ALFABEAM 2 9.072874232661139 21.744864729505274 2009-Apr-18 19:43:04 LOG4 log_alfabeam: ALFABEAM 3 9.071584180373913 21.849498760884163 2009-Apr-18 19:43:04 LOG4 log_alfabeam: ALFABEAM 4 9.065167912669336 21.882457655700978 2009-Apr-18 19:43:04 LOG4 log_alfabeam: ALFABEAM 5 9.060333670454797 21.809499057427242 2009-Apr-18 19:43:04 LOG4 log_alfabeam: ALFABEAM 6 9.061960985110041 21.705812907154733 2009-Apr-18 19:43:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800309 2009-Apr-18 19:43:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:43:05 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-18 19:43:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:43:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.608 (still bad) 2009-Apr-18 19:43:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-18 19:43:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85386.00 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.609 (still bad) 2009-Apr-18 19:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Apr-18 19:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Apr-18 19:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.596 (still bad) 2009-Apr-18 19:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.593 (still bad) 2009-Apr-18 19:43:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:43:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:43:16 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-18 19:43:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:43:16 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-18 19:43:16 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-18 19:43:16 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-18 19:43:16 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-18 19:43:16 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:43:16 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:43:16 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:43:16 LOG2 antvel: Parameters to Doppler: Topocentric 85396 2009 108 0.0 2009-Apr-18 19:43:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:43:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-18 19:43:16 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-18 19:43:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:43:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:43:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:43:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-18 19:43:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:43:16 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-18 19:43:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-18 19:43:16 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.085313 2009.2979376124927 18.999933 2009-Apr-18 19:43:16 LOG4 log_alfabeam: ALFABEAM 0 9.066666666667016 21.778333333333343 2009-Apr-18 19:43:16 LOG4 log_alfabeam: ALFABEAM 1 9.068191112865858 21.674374750796922 2009-Apr-18 19:43:16 LOG4 log_alfabeam: ALFABEAM 2 9.072907409237851 21.746082799503434 2009-Apr-18 19:43:16 LOG4 log_alfabeam: ALFABEAM 3 9.071511882399408 21.850453958795971 2009-Apr-18 19:43:16 LOG4 log_alfabeam: ALFABEAM 4 9.065063031873665 21.882154246198503 2009-Apr-18 19:43:16 LOG4 log_alfabeam: ALFABEAM 5 9.060302923867985 21.808257746056697 2009-Apr-18 19:43:16 LOG4 log_alfabeam: ALFABEAM 6 9.062034488443912 21.704899874542530 2009-Apr-18 19:43:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800310 2009-Apr-18 19:43:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:43:17 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-18 19:43:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:43:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:43:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Apr-18 19:43:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-18 19:43:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85398.00 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Apr-18 19:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Apr-18 19:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2009-Apr-18 19:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2009-Apr-18 19:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2009-Apr-18 19:43:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:43:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:43:28 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-18 19:43:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:43:28 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-18 19:43:28 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-18 19:43:28 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-18 19:43:28 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-18 19:43:28 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:43:28 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:43:28 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:43:28 LOG2 antvel: Parameters to Doppler: Topocentric 85408 2009 108 0.0 2009-Apr-18 19:43:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:43:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-18 19:43:28 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-18 19:43:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:43:28 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:43:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:43:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-18 19:43:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:43:28 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-18 19:43:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-18 19:43:28 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.088655 2009.2979379927497 18.999933 2009-Apr-18 19:43:28 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666849 21.778333333333340 2009-Apr-18 19:43:28 LOG4 log_alfabeam: ALFABEAM 1 9.068295571596206 21.674682785529626 2009-Apr-18 19:43:28 LOG4 log_alfabeam: ALFABEAM 2 9.072939322313323 21.747305729590757 2009-Apr-18 19:43:28 LOG4 log_alfabeam: ALFABEAM 3 9.071438710761843 21.851393718714871 2009-Apr-18 19:43:28 LOG4 log_alfabeam: ALFABEAM 4 9.064958622681116 21.881830841119903 2009-Apr-18 19:43:28 LOG4 log_alfabeam: ALFABEAM 5 9.060273483789071 21.807012537843750 2009-Apr-18 19:43:28 LOG4 log_alfabeam: ALFABEAM 6 9.062108777362418 21.704002671733914 2009-Apr-18 19:43:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800311 2009-Apr-18 19:43:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:43:29 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-18 19:43:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:43:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:43:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-18 19:43:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85410.00 2009-Apr-18 19:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:43:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.572 (still bad) 2009-Apr-18 19:43:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:43:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.470 1.264 1.513 1.489 2009-Apr-18 19:43:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.405 1.341 1.560 1.521 2009-Apr-18 19:43:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.572 1.330 1.525 1.299 2009-Apr-18 19:43:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.333 0.106 1.480 0.133 2009-Apr-18 19:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.573 (still bad) 2009-Apr-18 19:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.571 (still bad) 2009-Apr-18 19:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.571 (still bad) 2009-Apr-18 19:43:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:43:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:43:40 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-18 19:43:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:43:40 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-18 19:43:40 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-18 19:43:40 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-18 19:43:40 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-18 19:43:40 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:43:40 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:43:40 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:43:40 LOG2 antvel: Parameters to Doppler: Topocentric 85420 2009 108 0.0 2009-Apr-18 19:43:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:43:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-18 19:43:40 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-18 19:43:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:43:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:43:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:43:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-18 19:43:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:43:40 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-18 19:43:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-18 19:43:40 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.091998 2009.2979383730069 18.999933 2009-Apr-18 19:43:40 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666865 21.778333333333343 2009-Apr-18 19:43:40 LOG4 log_alfabeam: ALFABEAM 1 9.068399593950753 21.675010810523666 2009-Apr-18 19:43:40 LOG4 log_alfabeam: ALFABEAM 2 9.072969976703877 21.748533530145934 2009-Apr-18 19:43:40 LOG4 log_alfabeam: ALFABEAM 3 9.071364667166129 21.852318106066097 2009-Apr-18 19:43:40 LOG4 log_alfabeam: ALFABEAM 4 9.064854681295943 21.881487516888832 2009-Apr-18 19:43:40 LOG4 log_alfabeam: ALFABEAM 5 9.060245343845915 21.805763431067817 2009-Apr-18 19:43:40 LOG4 log_alfabeam: ALFABEAM 6 9.062183849881590 21.703121207972423 2009-Apr-18 19:43:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800312 2009-Apr-18 19:43:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:43:41 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-18 19:43:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:43:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:43:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-18 19:43:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85422.00 2009-Apr-18 19:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.571 (still bad) 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.540 (still bad) 2009-Apr-18 19:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.542 (still bad) 2009-Apr-18 19:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.543 (still bad) 2009-Apr-18 19:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.542 (still bad) 2009-Apr-18 19:43:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:43:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:43:52 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-18 19:43:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:43:52 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-18 19:43:52 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-18 19:43:52 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-18 19:43:52 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-18 19:43:52 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:43:52 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:43:52 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:43:52 LOG2 antvel: Parameters to Doppler: Topocentric 85432 2009 108 0.0 2009-Apr-18 19:43:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:43:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-18 19:43:52 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-18 19:43:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:43:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:43:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:43:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-18 19:43:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:43:52 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-18 19:43:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-18 19:43:52 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.095340 2009.2979387532639 18.999933 2009-Apr-18 19:43:52 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666787 21.778333333333347 2009-Apr-18 19:43:52 LOG4 log_alfabeam: ALFABEAM 1 9.068503059913436 21.675358344283243 2009-Apr-18 19:43:52 LOG4 log_alfabeam: ALFABEAM 2 9.072999342022536 21.749764740719744 2009-Apr-18 19:43:52 LOG4 log_alfabeam: ALFABEAM 3 9.071289842661496 21.853226100030433 2009-Apr-18 19:43:52 LOG4 log_alfabeam: ALFABEAM 4 9.064751327434131 21.881124781411263 2009-Apr-18 19:43:52 LOG4 log_alfabeam: ALFABEAM 5 9.060218529814888 21.804511918520767 2009-Apr-18 19:43:52 LOG4 log_alfabeam: ALFABEAM 6 9.062259613600654 21.702256427109251 2009-Apr-18 19:43:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800313 2009-Apr-18 19:43:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:43:53 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-18 19:43:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:43:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.542 (still bad) 2009-Apr-18 19:43:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:43:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-18 19:43:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85434.00 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-18 19:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-18 19:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-18 19:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-18 19:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-18 19:44:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:44:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:44:04 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-18 19:44:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:44:04 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-18 19:44:04 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-18 19:44:04 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-18 19:44:04 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-18 19:44:04 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:44:04 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:44:04 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:44:04 LOG2 antvel: Parameters to Doppler: Topocentric 85444 2009 108 0.0 2009-Apr-18 19:44:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:44:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-18 19:44:04 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-18 19:44:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:44:04 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:44:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:44:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-18 19:44:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:44:04 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-18 19:44:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-18 19:44:04 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.098682 2009.2979391335209 18.999933 2009-Apr-18 19:44:04 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666716 21.778333333333343 2009-Apr-18 19:44:04 LOG4 log_alfabeam: ALFABEAM 1 9.068605944122483 21.675725164958347 2009-Apr-18 19:44:04 LOG4 log_alfabeam: ALFABEAM 2 9.073027417826241 21.750998999644853 2009-Apr-18 19:44:04 LOG4 log_alfabeam: ALFABEAM 3 9.071214263092255 21.854117541914881 2009-Apr-18 19:44:04 LOG4 log_alfabeam: ALFABEAM 4 9.064648586156308 21.880742868858079 2009-Apr-18 19:44:04 LOG4 log_alfabeam: ALFABEAM 5 9.060193039716587 21.803258372500419 2009-Apr-18 19:44:04 LOG4 log_alfabeam: ALFABEAM 6 9.062336042471683 21.701408449043061 2009-Apr-18 19:44:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800314 2009-Apr-18 19:44:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:44:05 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-18 19:44:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:44:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:44:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-18 19:44:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-18 19:44:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85446.00 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.534 (still bad) 2009-Apr-18 19:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.531 (still bad) 2009-Apr-18 19:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.532 (still bad) 2009-Apr-18 19:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.532 (still bad) 2009-Apr-18 19:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.532 (still bad) 2009-Apr-18 19:44:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:44:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:44:16 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-18 19:44:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:44:16 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-18 19:44:16 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-18 19:44:16 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-18 19:44:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-18 19:44:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 19:44:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 19:44:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:44:16 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-18 19:44:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:44:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:44:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:44:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:44:16 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-18 19:44:16 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-18 19:44:16 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-18 19:44:16 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-18 19:44:16 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-18 19:44:16 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:44:16 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:44:16 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:44:16 LOG2 antvel: Parameters to Doppler: Topocentric 85456 2009 108 0.0 2009-Apr-18 19:44:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:44:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-18 19:44:16 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-18 19:44:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:44:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:44:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-18 19:44:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:44:16 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-18 19:44:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-18 19:44:16 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.102025 2009.2979395137779 18.999933 2009-Apr-18 19:44:16 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666757 21.778333333333340 2009-Apr-18 19:44:16 LOG4 log_alfabeam: ALFABEAM 1 9.068708221888878 21.676111043168028 2009-Apr-18 19:44:16 LOG4 log_alfabeam: ALFABEAM 2 9.073054204379011 21.752235948431064 2009-Apr-18 19:44:16 LOG4 log_alfabeam: ALFABEAM 3 9.071137954378587 21.854992284307876 2009-Apr-18 19:44:16 LOG4 log_alfabeam: ALFABEAM 4 9.064546481819450 21.880342020657611 2009-Apr-18 19:44:16 LOG4 log_alfabeam: ALFABEAM 5 9.060168870856012 21.802003160860554 2009-Apr-18 19:44:16 LOG4 log_alfabeam: ALFABEAM 6 9.062413110474928 21.700577382582598 2009-Apr-18 19:44:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800315 2009-Apr-18 19:44:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:44:17 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-18 19:44:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-18 19:44:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85458.00 2009-Apr-18 19:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.533 (still bad) 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.153 (still bad) 2009-Apr-18 19:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.149 (still bad) 2009-Apr-18 19:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.151 (still bad) 2009-Apr-18 19:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.151 (still bad) 2009-Apr-18 19:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.149 (still bad) 2009-Apr-18 19:44:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:44:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:44:28 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-18 19:44:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:44:28 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-18 19:44:28 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-18 19:44:28 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-18 19:44:28 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-18 19:44:28 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:44:28 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:44:28 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:44:28 LOG2 antvel: Parameters to Doppler: Topocentric 85468 2009 108 0.0 2009-Apr-18 19:44:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:44:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-18 19:44:28 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-18 19:44:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:44:28 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:44:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:44:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-18 19:44:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:44:28 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-18 19:44:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-18 19:44:28 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.105367 2009.2979398940349 18.999933 2009-Apr-18 19:44:28 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666787 21.778333333333332 2009-Apr-18 19:44:28 LOG4 log_alfabeam: ALFABEAM 1 9.068809778337357 21.676515371117432 2009-Apr-18 19:44:28 LOG4 log_alfabeam: ALFABEAM 2 9.073079680343952 21.753474119721101 2009-Apr-18 19:44:28 LOG4 log_alfabeam: ALFABEAM 3 9.071061011859550 21.855849429182392 2009-Apr-18 19:44:28 LOG4 log_alfabeam: ALFABEAM 4 9.064445128740708 21.879922869607316 2009-Apr-18 19:44:28 LOG4 log_alfabeam: ALFABEAM 5 9.060146039746661 21.800747774053068 2009-Apr-18 19:44:28 LOG4 log_alfabeam: ALFABEAM 6 9.062490721711621 21.699764048009861 2009-Apr-18 19:44:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800316 2009-Apr-18 19:44:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:44:29 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-18 19:44:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:44:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:44:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-18 19:44:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85470.00 2009-Apr-18 19:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.149 (still bad) 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-18 19:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-18 19:44:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:44:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.932 1.111 1.093 2009-Apr-18 19:44:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.969 1.132 1.107 2009-Apr-18 19:44:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.956 1.108 0.980 2009-Apr-18 19:44:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.106 1.041 0.132 2009-Apr-18 19:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-18 19:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-18 19:44:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:44:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:44:40 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-18 19:44:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:44:40 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-18 19:44:40 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-18 19:44:40 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-18 19:44:40 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-18 19:44:40 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:44:40 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:44:40 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:44:40 LOG2 antvel: Parameters to Doppler: Topocentric 85480 2009 108 0.0 2009-Apr-18 19:44:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:44:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-18 19:44:40 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-18 19:44:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:44:40 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:44:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:44:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-18 19:44:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:44:40 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-18 19:44:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-18 19:44:40 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.108710 2009.2979402742922 18.999933 2009-Apr-18 19:44:40 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666750 21.778333333333347 2009-Apr-18 19:44:40 LOG4 log_alfabeam: ALFABEAM 1 9.068910622181262 21.676937985913824 2009-Apr-18 19:44:40 LOG4 log_alfabeam: ALFABEAM 2 9.073103857885052 21.754713530553531 2009-Apr-18 19:44:40 LOG4 log_alfabeam: ALFABEAM 3 9.070983439868908 21.856689147214336 2009-Apr-18 19:44:40 LOG4 log_alfabeam: ALFABEAM 4 9.064344517811572 21.879485585265215 2009-Apr-18 19:44:40 LOG4 log_alfabeam: ALFABEAM 5 9.060124532524634 21.799492194392265 2009-Apr-18 19:44:40 LOG4 log_alfabeam: ALFABEAM 6 9.062568872350830 21.698968249515641 2009-Apr-18 19:44:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800317 2009-Apr-18 19:44:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:44:41 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-18 19:44:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:44:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:44:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-18 19:44:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85482.00 2009-Apr-18 19:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-18 19:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-18 19:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-18 19:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-18 19:44:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:44:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:44:52 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-18 19:44:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:44:52 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-18 19:44:52 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-18 19:44:52 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-18 19:44:52 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-18 19:44:52 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:44:52 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:44:52 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:44:52 LOG2 antvel: Parameters to Doppler: Topocentric 85492 2009 108 0.0 2009-Apr-18 19:44:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:44:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-18 19:44:52 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-18 19:44:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:44:52 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:44:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:44:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-18 19:44:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:44:52 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-18 19:44:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-18 19:44:52 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.112052 2009.2979406545492 18.999933 2009-Apr-18 19:44:52 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666691 21.778333333333343 2009-Apr-18 19:44:52 LOG4 log_alfabeam: ALFABEAM 1 9.069010642815586 21.677378203851120 2009-Apr-18 19:44:52 LOG4 log_alfabeam: ALFABEAM 2 9.073126721663103 21.755952721481652 2009-Apr-18 19:44:52 LOG4 log_alfabeam: ALFABEAM 3 9.070905335692858 21.857510626940989 2009-Apr-18 19:44:52 LOG4 log_alfabeam: ALFABEAM 4 9.064244758920680 21.879030875076026 2009-Apr-18 19:44:52 LOG4 log_alfabeam: ALFABEAM 5 9.060104359638542 21.798237898135699 2009-Apr-18 19:44:52 LOG4 log_alfabeam: ALFABEAM 6 9.062647465065472 21.698190721429931 2009-Apr-18 19:44:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800318 2009-Apr-18 19:44:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:44:53 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-18 19:44:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:44:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-18 19:44:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:44:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:44:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-18 19:44:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85494.00 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-18 19:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 19:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-18 19:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-18 19:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 19:45:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:45:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:45:04 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-18 19:45:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:45:04 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-18 19:45:04 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-18 19:45:04 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-18 19:45:04 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-18 19:45:04 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:45:04 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:45:04 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:45:04 LOG2 antvel: Parameters to Doppler: Topocentric 85504 2009 108 0.0 2009-Apr-18 19:45:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:45:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-18 19:45:04 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-18 19:45:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:45:04 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:45:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:45:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-18 19:45:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:45:04 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-18 19:45:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-18 19:45:04 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.115395 2009.2979410348062 18.999933 2009-Apr-18 19:45:04 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666700 21.778333333333340 2009-Apr-18 19:45:04 LOG4 log_alfabeam: ALFABEAM 1 9.069109851685674 21.677835832836717 2009-Apr-18 19:45:04 LOG4 log_alfabeam: ALFABEAM 2 9.073148286658192 21.757191723510669 2009-Apr-18 19:45:04 LOG4 log_alfabeam: ALFABEAM 3 9.070826703851431 21.858314084156632 2009-Apr-18 19:45:04 LOG4 log_alfabeam: ALFABEAM 4 9.064145840146180 21.878558936814052 2009-Apr-18 19:45:04 LOG4 log_alfabeam: ALFABEAM 5 9.060085504425629 21.796984849881973 2009-Apr-18 19:45:04 LOG4 log_alfabeam: ALFABEAM 6 9.062726496132628 21.697431224040535 2009-Apr-18 19:45:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800319 2009-Apr-18 19:45:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:45:05 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-18 19:45:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:45:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:45:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 19:45:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-18 19:45:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85506.00 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-18 19:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-18 19:45:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:45:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:45:16 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-18 19:45:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:45:16 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-18 19:45:16 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-18 19:45:16 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-18 19:45:16 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-18 19:45:16 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:45:16 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:45:16 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:45:16 LOG2 antvel: Parameters to Doppler: Topocentric 85516 2009 108 0.0 2009-Apr-18 19:45:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:45:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-18 19:45:16 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-18 19:45:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:45:16 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:45:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:45:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-18 19:45:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:45:16 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-18 19:45:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-18 19:45:16 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.118737 2009.2979414150632 18.999933 2009-Apr-18 19:45:16 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666690 21.778333333333329 2009-Apr-18 19:45:16 LOG4 log_alfabeam: ALFABEAM 1 9.069208143029813 21.678310121010121 2009-Apr-18 19:45:16 LOG4 log_alfabeam: ALFABEAM 2 9.073168543392491 21.758429094626443 2009-Apr-18 19:45:16 LOG4 log_alfabeam: ALFABEAM 3 9.070747642836464 21.859098796029691 2009-Apr-18 19:45:16 LOG4 log_alfabeam: ALFABEAM 4 9.064047866389222 21.878070544594099 2009-Apr-18 19:45:16 LOG4 log_alfabeam: ALFABEAM 5 9.060067971463171 21.795734502225727 2009-Apr-18 19:45:16 LOG4 log_alfabeam: ALFABEAM 6 9.062805867517378 21.696690404510949 2009-Apr-18 19:45:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800320 2009-Apr-18 19:45:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:45:17 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-18 19:45:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:45:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:45:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-18 19:45:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85518.00 2009-Apr-18 19:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-18 19:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2009-Apr-18 19:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.089 (still bad) 2009-Apr-18 19:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-18 19:45:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:45:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:45:28 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-18 19:45:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:45:28 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-18 19:45:28 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-18 19:45:28 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-18 19:45:28 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-18 19:45:28 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:45:28 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:45:28 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:45:28 LOG2 antvel: Parameters to Doppler: Topocentric 85528 2009 108 0.0 2009-Apr-18 19:45:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:45:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-18 19:45:28 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-18 19:45:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:45:28 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:45:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:45:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-18 19:45:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:45:28 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-18 19:45:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-18 19:45:28 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.122080 2009.2979417953202 18.999933 2009-Apr-18 19:45:28 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666741 21.778333333333343 2009-Apr-18 19:45:28 LOG4 log_alfabeam: ALFABEAM 1 9.069305531319637 21.678800853043033 2009-Apr-18 19:45:28 LOG4 log_alfabeam: ALFABEAM 2 9.073187509489548 21.759664885624488 2009-Apr-18 19:45:28 LOG4 log_alfabeam: ALFABEAM 3 9.070668156862508 21.859865023498436 2009-Apr-18 19:45:28 LOG4 log_alfabeam: ALFABEAM 4 9.063950822632211 21.877565918310196 2009-Apr-18 19:45:28 LOG4 log_alfabeam: ALFABEAM 5 9.060051741502855 21.794486796362111 2009-Apr-18 19:45:28 LOG4 log_alfabeam: ALFABEAM 6 9.062885576074324 21.695967979780242 2009-Apr-18 19:45:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800321 2009-Apr-18 19:45:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:45:29 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-18 19:45:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:45:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:45:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-18 19:45:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85530.00 2009-Apr-18 19:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-18 19:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-18 19:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-18 19:45:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:45:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.905 1.071 1.069 2009-Apr-18 19:45:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.949 1.078 1.086 2009-Apr-18 19:45:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.937 1.039 0.948 2009-Apr-18 19:45:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.106 1.020 0.132 2009-Apr-18 19:45:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:45:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:45:40 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-18 19:45:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:45:40 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-18 19:45:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-18 19:45:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-18 19:45:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-18 19:45:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:45:40 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-18 19:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-18 19:45:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:45:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-18 19:45:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:45:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:45:40 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-18 19:45:40 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-18 19:45:40 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-18 19:45:40 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-18 19:45:40 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:45:40 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:45:40 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:45:40 LOG2 antvel: Parameters to Doppler: Topocentric 85540 2009 108 0.0 2009-Apr-18 19:45:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:45:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-18 19:45:40 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-18 19:45:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:45:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:45:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:45:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-18 19:45:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:45:40 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-18 19:45:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-18 19:45:40 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.125422 2009.2979421755774 18.999933 2009-Apr-18 19:45:40 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666709 21.778333333333343 2009-Apr-18 19:45:40 LOG4 log_alfabeam: ALFABEAM 1 9.069401916113556 21.679307217382977 2009-Apr-18 19:45:40 LOG4 log_alfabeam: ALFABEAM 2 9.073205181114819 21.760897680792493 2009-Apr-18 19:45:40 LOG4 log_alfabeam: ALFABEAM 3 9.070588344899496 21.860612132997190 2009-Apr-18 19:45:40 LOG4 log_alfabeam: ALFABEAM 4 9.063854808328676 21.877045890103652 2009-Apr-18 19:45:40 LOG4 log_alfabeam: ALFABEAM 5 9.060036813524787 21.793243152524475 2009-Apr-18 19:45:40 LOG4 log_alfabeam: ALFABEAM 6 9.062965523761120 21.695264509992501 2009-Apr-18 19:45:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800322 2009-Apr-18 19:45:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:45:41 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-18 19:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:45:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-18 19:45:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-18 19:45:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85542.00 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.602 (still bad) 2009-Apr-18 19:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.599 (still bad) 2009-Apr-18 19:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.602 (still bad) 2009-Apr-18 19:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.602 (still bad) 2009-Apr-18 19:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.601 (still bad) 2009-Apr-18 19:45:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:45:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:45:52 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-18 19:45:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:45:52 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-18 19:45:52 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-18 19:45:52 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-18 19:45:52 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-18 19:45:52 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:45:52 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:45:52 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:45:52 LOG2 antvel: Parameters to Doppler: Topocentric 85552 2009 108 0.0 2009-Apr-18 19:45:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:45:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-18 19:45:52 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-18 19:45:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:45:52 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:45:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:45:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-18 19:45:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:45:52 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-18 19:45:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-18 19:45:52 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.128765 2009.2979425558344 18.999933 2009-Apr-18 19:45:52 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666702 21.778333333333329 2009-Apr-18 19:45:52 LOG4 log_alfabeam: ALFABEAM 1 9.069497315122723 21.679828981807834 2009-Apr-18 19:45:52 LOG4 log_alfabeam: ALFABEAM 2 9.073221578304880 21.762127555897841 2009-Apr-18 19:45:52 LOG4 log_alfabeam: ALFABEAM 3 9.070508210386302 21.861340429551401 2009-Apr-18 19:45:52 LOG4 log_alfabeam: ALFABEAM 4 9.063759805166022 21.876510695548554 2009-Apr-18 19:45:52 LOG4 log_alfabeam: ALFABEAM 5 9.060023165963681 21.792003483548186 2009-Apr-18 19:45:52 LOG4 log_alfabeam: ALFABEAM 6 9.063045708451757 21.694579670303732 2009-Apr-18 19:45:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800323 2009-Apr-18 19:45:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:45:53 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-18 19:45:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:45:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-18 19:45:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:45:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:45:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-18 19:45:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85554.00 2009-Apr-18 19:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.600 (still bad) 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.592 (still bad) 2009-Apr-18 19:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2009-Apr-18 19:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2009-Apr-18 19:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2009-Apr-18 19:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.589 (still bad) 2009-Apr-18 19:46:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:46:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:46:04 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-18 19:46:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:46:04 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-18 19:46:04 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-18 19:46:04 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-18 19:46:04 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-18 19:46:04 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:46:04 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:46:04 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:46:04 LOG2 antvel: Parameters to Doppler: Topocentric 85564 2009 108 0.0 2009-Apr-18 19:46:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:46:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-18 19:46:04 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-18 19:46:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:46:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:46:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:46:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-18 19:46:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:46:04 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-18 19:46:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-18 19:46:04 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.132107 2009.2979429360914 18.999933 2009-Apr-18 19:46:04 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666690 21.778333333333343 2009-Apr-18 19:46:04 LOG4 log_alfabeam: ALFABEAM 1 9.069591633599504 21.680365284001049 2009-Apr-18 19:46:04 LOG4 log_alfabeam: ALFABEAM 2 9.073236702577125 21.763353129577652 2009-Apr-18 19:46:04 LOG4 log_alfabeam: ALFABEAM 3 9.070427852071157 21.862049368133345 2009-Apr-18 19:46:04 LOG4 log_alfabeam: ALFABEAM 4 9.063665906794229 21.875961215746198 2009-Apr-18 19:46:04 LOG4 log_alfabeam: ALFABEAM 5 9.060010792545576 21.790769169535245 2009-Apr-18 19:46:04 LOG4 log_alfabeam: ALFABEAM 6 9.063126032760456 21.693913935260561 2009-Apr-18 19:46:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800324 2009-Apr-18 19:46:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:46:05 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-18 19:46:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:46:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-18 19:46:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-18 19:46:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85566.00 2009-Apr-18 19:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.588 (still bad) 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.582 (still bad) 2009-Apr-18 19:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.581 (still bad) 2009-Apr-18 19:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.580 (still bad) 2009-Apr-18 19:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.580 (still bad) 2009-Apr-18 19:46:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:46:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:46:16 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-18 19:46:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:46:16 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-18 19:46:16 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-18 19:46:16 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-18 19:46:16 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-18 19:46:16 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:46:16 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:46:16 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:46:16 LOG2 antvel: Parameters to Doppler: Topocentric 85576 2009 108 0.0 2009-Apr-18 19:46:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:46:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-18 19:46:16 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-18 19:46:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:46:16 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:46:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:46:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-18 19:46:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:46:16 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-18 19:46:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-18 19:46:16 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.135449 2009.2979433163484 18.999933 2009-Apr-18 19:46:16 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666702 21.778333333333347 2009-Apr-18 19:46:16 LOG4 log_alfabeam: ALFABEAM 1 9.069684864894411 21.680915714602484 2009-Apr-18 19:46:16 LOG4 log_alfabeam: ALFABEAM 2 9.073250572138798 21.764574142381740 2009-Apr-18 19:46:16 LOG4 log_alfabeam: ALFABEAM 3 9.070347296310382 21.862739092303812 2009-Apr-18 19:46:16 LOG4 log_alfabeam: ALFABEAM 4 9.063573119083875 21.875397865959027 2009-Apr-18 19:46:16 LOG4 log_alfabeam: ALFABEAM 5 9.059999672841791 21.789540457601333 2009-Apr-18 19:46:16 LOG4 log_alfabeam: ALFABEAM 6 9.063206471901916 21.693267131416874 2009-Apr-18 19:46:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800325 2009-Apr-18 19:46:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:46:17 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-18 19:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.580 (still bad) 2009-Apr-18 19:46:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:46:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-18 19:46:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-18 19:46:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85578.00 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.580 (still bad) 2009-Apr-18 19:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Apr-18 19:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.564 (still bad) 2009-Apr-18 19:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Apr-18 19:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.562 (still bad) 2009-Apr-18 19:46:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:46:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:46:28 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-18 19:46:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:46:28 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-18 19:46:28 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-18 19:46:28 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-18 19:46:28 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-18 19:46:28 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:46:28 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:46:28 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:46:28 LOG2 antvel: Parameters to Doppler: Topocentric 85588 2009 108 0.0 2009-Apr-18 19:46:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:46:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-18 19:46:28 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-18 19:46:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:46:28 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:46:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:46:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-18 19:46:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:46:28 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-18 19:46:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-18 19:46:28 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.138792 2009.2979436966054 18.999933 2009-Apr-18 19:46:28 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666727 21.778333333333347 2009-Apr-18 19:46:28 LOG4 log_alfabeam: ALFABEAM 1 9.069777003415629 21.681479869960192 2009-Apr-18 19:46:28 LOG4 log_alfabeam: ALFABEAM 2 9.073263205396959 21.765790348221241 2009-Apr-18 19:46:28 LOG4 log_alfabeam: ALFABEAM 3 9.070266568587359 21.863409754090537 2009-Apr-18 19:46:28 LOG4 log_alfabeam: ALFABEAM 4 9.063481446846755 21.874821055246102 2009-Apr-18 19:46:28 LOG4 log_alfabeam: ALFABEAM 5 9.059989786299449 21.788317580714011 2009-Apr-18 19:46:28 LOG4 log_alfabeam: ALFABEAM 6 9.063287002006630 21.692639078185532 2009-Apr-18 19:46:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800326 2009-Apr-18 19:46:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:46:29 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-18 19:46:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:46:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-18 19:46:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Apr-18 19:46:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-18 19:46:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85590.00 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Apr-18 19:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.539 (still bad) 2009-Apr-18 19:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-18 19:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.539 (still bad) 2009-Apr-18 19:46:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:46:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.443 1.248 1.480 1.476 2009-Apr-18 19:46:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.391 1.331 1.520 1.506 2009-Apr-18 19:46:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.535 1.322 1.483 1.285 2009-Apr-18 19:46:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.312 0.106 1.459 0.132 2009-Apr-18 19:46:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:46:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:46:40 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-18 19:46:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:46:40 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-18 19:46:40 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-18 19:46:40 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-18 19:46:40 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-18 19:46:40 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:46:40 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:46:40 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:46:40 LOG2 antvel: Parameters to Doppler: Topocentric 85600 2009 108 0.0 2009-Apr-18 19:46:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:46:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-18 19:46:40 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-18 19:46:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:46:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-18 19:46:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:46:40 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-18 19:46:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-18 19:46:40 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.142134 2009.2979440768627 18.999933 2009-Apr-18 19:46:40 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666762 21.778333333333354 2009-Apr-18 19:46:40 LOG4 log_alfabeam: ALFABEAM 1 9.069867963428839 21.682056828784599 2009-Apr-18 19:46:40 LOG4 log_alfabeam: ALFABEAM 2 9.073274611218224 21.767000430231395 2009-Apr-18 19:46:40 LOG4 log_alfabeam: ALFABEAM 3 9.070185766102117 21.864060937196431 2009-Apr-18 19:46:40 LOG4 log_alfabeam: ALFABEAM 4 9.063390974590293 21.874231720810343 2009-Apr-18 19:46:40 LOG4 log_alfabeam: ALFABEAM 5 9.059981119526077 21.787101846519310 2009-Apr-18 19:46:40 LOG4 log_alfabeam: ALFABEAM 6 9.063367527808902 21.692030126870289 2009-Apr-18 19:46:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800327 2009-Apr-18 19:46:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:46:41 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-18 19:46:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:46:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-18 19:46:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-18 19:46:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85602.00 2009-Apr-18 19:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.536 (still bad) 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.531 (still bad) 2009-Apr-18 19:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.529 (still bad) 2009-Apr-18 19:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.530 (still bad) 2009-Apr-18 19:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.529 (still bad) 2009-Apr-18 19:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.528 (still bad) 2009-Apr-18 19:46:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:46:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:46:52 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-18 19:46:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:46:52 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-18 19:46:52 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-18 19:46:52 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-18 19:46:52 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-18 19:46:52 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:46:52 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:46:52 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:46:52 LOG2 antvel: Parameters to Doppler: Topocentric 85612 2009 108 0.0 2009-Apr-18 19:46:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:46:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-18 19:46:52 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-18 19:46:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:46:52 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:46:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:46:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-18 19:46:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-18 19:46:52 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-18 19:46:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-18 19:46:52 LOG5 log_alfabeam: Parameters: 9.0666666666666664 21.778333333333332 9.145477 2009.2979444571197 18.999933 2009-Apr-18 19:46:52 LOG4 log_alfabeam: ALFABEAM 0 9.066666666666686 21.778333333333332 2009-Apr-18 19:46:52 LOG4 log_alfabeam: ALFABEAM 1 9.069957771137323 21.682646345010721 2009-Apr-18 19:46:52 LOG4 log_alfabeam: ALFABEAM 2 9.073284814373801 21.768204544088292 2009-Apr-18 19:46:52 LOG4 log_alfabeam: ALFABEAM 3 9.070104888550526 21.864693046004209 2009-Apr-18 19:46:52 LOG4 log_alfabeam: ALFABEAM 4 9.063301675433992 21.873630108840690 2009-Apr-18 19:46:52 LOG4 log_alfabeam: ALFABEAM 5 9.059973646598207 21.785893080924613 2009-Apr-18 19:46:52 LOG4 log_alfabeam: ALFABEAM 6 9.063448051384354 21.691439860687964 2009-Apr-18 19:46:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910800328 2009-Apr-18 19:46:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-18 19:46:53 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-18 19:46:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:46:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-18 19:46:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:46:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:46:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-18 19:46:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85614.00 2009-Apr-18 19:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.528 (still bad) 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.523 (still bad) 2009-Apr-18 19:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.522 (still bad) 2009-Apr-18 19:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.524 (still bad) 2009-Apr-18 19:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.522 (still bad) 2009-Apr-18 19:47:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:47:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-18 19:47:04 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-18 19:47:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-18 19:47:04 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-18 19:47:04 INFO2 smartfreq: Switching off CAL 2009-Apr-18 19:47:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 19:47:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 19:47:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:47:04 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-18 19:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.522 (still bad) 2009-Apr-18 19:47:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:47:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:47:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:47:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:47:04 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-18 19:47:04 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-18 19:47:04 LOG5 antvel: Calling 'antvel 90400.000000 214642.000000 J Topocentric 0' 2009-Apr-18 19:47:04 LOG2 antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29794 J 2009-Apr-18 19:47:04 LOG2 antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:47:04 LOG2 antvel: Parameters to Doppler: Topocentric 85624 2009 108 0.0 2009-Apr-18 19:47:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:47:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-18 19:47:04 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-18 19:47:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:47:04 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:47:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:47:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:47:04 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-18 19:47:04 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-18 19:47:04 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-18 19:47:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:47:04 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-18 19:47:04 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-18 19:47:04 NOTE run_command_file: DONE with command file processing 2009-Apr-18 19:47:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-18 19:47:04 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-18 19:47:04 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-18 19:47:04 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-18 19:47:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:47:05 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-18 19:47:05 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-18 19:47:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:47:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:47:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:14 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-18 19:47:14 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-18 19:47:14 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-18 19:47:14 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-18 19:47:14 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-18 19:47:14 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-18 19:47:14 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-18 19:47:14 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-18 19:47:14 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-18 19:47:14 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-18 19:47:14 LOG3 exec_msg: Closing socket 2009-Apr-18 19:47:14 LOG3 exec_msg: Closing socket 2009-Apr-18 19:47:14 LOG3 exec_msg: Closing socket 2009-Apr-18 19:47:14 LOG3 exec_msg: Closing socket 2009-Apr-18 19:47:17 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-18 19:47:17 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-18 19:47:17 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-18 19:47:17 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-18 19:47:23 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-18 19:47:24 LOG2 CIMA-antvel: Precessing RA = 09:04:00.0 Dec = +21:46:42.0 Epoch = 2009.29795 J 2009-Apr-18 19:47:24 LOG2 CIMA-antvel: Computed apparent RA = 09:04:33.4 Dec = +21:44:28.2 2009-Apr-18 19:47:24 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 85643 2009 108 0.0 2009-Apr-18 19:47:24 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-18 19:47:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-18 19:47:25 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-18 19:47:25 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-18 19:47:25 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-18 19:47:25 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-18 19:47:25 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-18 19:47:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-18 19:47:25 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-18 19:47:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:47:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:47:25 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:47:25 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-18 19:47:25 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:47:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:47:25 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-18 19:47:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:47:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:47:25 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-18 19:47:25 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-18 19:47:25 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-18 19:47:25 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-18 19:47:25 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-18 19:47:25 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-18 19:47:25 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-18 19:47:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-18 19:47:26 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-18 19:47:26 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-18 19:47:26 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-18 19:47:26 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-18 19:47:26 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-18 19:47:26 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-18 19:47:26 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-18 19:47:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-18 19:47:26 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-18 19:47:26 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-18 19:47:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-18 19:47:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:47:26 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-18 19:47:26 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-18 19:47:26 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-18 19:47:26 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-18 19:47:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-18 19:47:26 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-18 19:47:26 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-18 19:47:26 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-18 19:47:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:47:26 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-18 19:47:26 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-18 19:47:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-18 19:47:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-18 19:47:27 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-18 19:47:27 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-18 19:47:27 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-18 19:47:27 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-18 19:47:27 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-18 19:47:27 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-18 19:47:27 START begin_task: Starting task 'selecting calibration port' 2009-Apr-18 19:47:27 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-18 19:47:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-18 19:47:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:47:27 START begin_task: Starting task 'waiting on calport' 2009-Apr-18 19:47:27 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-18 19:47:27 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-18 19:47:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:47:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:47:27 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-18 19:47:27 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-18 19:47:27 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-18 19:47:27 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 19:47:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 19:47:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:47:27 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:47:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:47:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:47:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:47:27 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 19:47:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 19:47:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-18 19:47:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-18 19:47:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:47:27 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-18 19:47:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-18 19:47:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:47:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-18 19:47:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:47:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 19:47:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:47:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:47:28 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-18 19:47:28 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-18 19:47:28 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-18 19:47:28 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-18 19:47:28 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-18 19:47:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:47:28 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-18 19:47:28 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-18 19:47:28 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-18 19:47:28 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-18 19:47:28 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-18 19:47:28 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-18 19:47:28 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-18 19:47:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-18 19:47:28 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-18 19:47:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-18 19:47:28 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-18 19:47:28 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-18 19:47:28 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-18 19:47:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:47:28 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-18 19:47:28 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-18 19:47:28 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-18 19:47:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-18 19:47:29 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-18 19:47:36 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-18 19:47:36 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-18 19:47:36 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-18 19:47:36 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-18 19:47:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-18 19:47:36 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-18 19:47:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-18 19:47:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-18 19:47:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:47:36 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-18 19:47:36 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-18 19:47:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-18 19:47:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:47:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-18 19:47:39 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-18 19:47:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-18 19:47:39 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-18 19:47:39 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-18 19:47:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-18 19:47:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:47:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:47:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:47:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:47:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-18 19:47:39 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-18 19:47:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-18 19:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-18 19:47:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-18 19:47:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-18 19:47:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-18 19:47:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-18 19:47:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-18 19:47:39 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-18 19:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.028 0.913 ALFA beam 1: 1.076 1.081 2009-Apr-18 19:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.994 0.957 ALFA beam 3: 1.070 1.072 2009-Apr-18 19:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.069 0.920 ALFA beam 5: 1.057 0.949 2009-Apr-18 19:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.899 0.103 ALFA beam 7: 1.006 0.129 2009-Apr-18 19:47:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-18 19:47:39 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-18 19:47:39 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-18 19:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-18 19:47:40 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-18 19:47:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-18 19:47:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-18 19:47:40 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-18 19:47:40 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-18 19:47:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-18 19:47:40 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-18 19:47:40 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-18 19:47:40 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-18 19:47:40 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift90p1 090900.0 +214642 J 0 Topocentric velocity(optical) 2009-Apr-18 19:47:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift90p1 090900.0 +214642 J 0 Topocentric velocity(optical)' 2009-Apr-18 19:47:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-18 19:47:40 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-18 19:47:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Apr-18 19:47:41 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-18 19:47:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift90p1} 2009-Apr-18 19:47:41 INFO5 fixed_driftmap: Start: year = 2009.2979459781479 RA = 09:09:33.3 Dec = +21:44:25.2 2009-Apr-18 19:47:41 NOTE fixed_driftmap: Setting ZA to 3:23:11.5 ... 2009-Apr-18 19:47:41 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 3.39 2009-Apr-18 19:47:41 LOG3 track_source: Calling 'track_source drift90p1 180.0 3.3865287046 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-18 19:47:41 START begin_task: Starting task 'sending tracking commands' 2009-Apr-18 19:47:41 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-18 19:47:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift90p1} INFO {Slewing to source 'drift90p1' ...} 2009-Apr-18 19:47:41 INFO1 track_source: Starting to track drift90p1 2009-Apr-18 19:47:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift90p1" 2009-Apr-18 19:47:41 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-18 19:47:41 LOG3 vw_send: To DATATAKING: set dec 3.3865287046 2009-Apr-18 19:47:41 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-18 19:47:41 LOG3 vw_send: To DATATAKING: pnt tr 180.0 3.3865287046 -CF 2009-Apr-18 19:47:41 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-18 19:47:41 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-18 19:47:41 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-18 19:47:41 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-18 19:47:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:47:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-18 19:47:41 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-18 19:47:41 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-18 19:47:41 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-18 19:47:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-18 19:47:41 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-18 19:47:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-18 19:47:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-18 19:47:41 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-18 19:47:41 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift90p1" 2009-Apr-18 19:47:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-18 19:47:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.913 1.076 1.081 2009-Apr-18 19:47:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.957 1.070 1.072 2009-Apr-18 19:47:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.920 1.057 0.949 2009-Apr-18 19:47:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.103 1.006 0.129 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: set dec 3.3865287046 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: vw% 3.3865287046 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 3.3865287046 -CF 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-18 19:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:47:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-18 19:47:42 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-18 19:47:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-18 19:47:42 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-18 19:47:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-18 19:47:42 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-18 19:47:42 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-18 19:47:42 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-18 19:47:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:47:42 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-18 19:47:42 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-18 19:47:42 START begin_task: Starting task 'waiting on telescope' 2009-Apr-18 19:47:42 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-18 19:47:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-18 19:47:42 LOG3 waittrk: Start waittrk 5 2009-Apr-18 19:47:42 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-18 19:47:42 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-18 19:47:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-18 19:47:47 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-18 19:47:47 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-18 19:47:47 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-18 19:48:41 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-18 19:48:41 INFO2 waittrk: Now tracking drift90p1 2009-Apr-18 19:48:41 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 3.40 2009-Apr-18 19:48:41 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-18 19:48:41 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-18 19:48:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:48:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-18 19:48:41 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 START begin_task: Starting task 'selecting calibration type' 2009-Apr-18 19:48:41 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-18 19:48:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-18 19:48:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:48:41 START begin_task: Starting task 'waiting on setcal' 2009-Apr-18 19:48:41 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-18 19:48:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:48:41 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:48:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-18 19:48:41 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-18 19:48:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:48:41 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-18 19:48:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:48:41 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:48:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:48:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:48:41 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:48:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-18 19:48:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:48:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:48:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:48:41 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:48:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:48:41 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:48:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:48:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-18 19:48:41 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-18 19:48:41 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-18 19:48:41 LOG5 antvel: Calling 'antvel 180.000000 3.386529 F Topocentric 0' 2009-Apr-18 19:48:41 LOG2 antvel: Transforming current Az = 180.00 ZA = 3.39 to apparent RA = 09:10:33.0 Dec = +21:44:25.2 2009-Apr-18 19:48:41 LOG2 antvel: Parameters to Doppler: Topocentric 85721 2009 108 0.0 2009-Apr-18 19:48:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-18 19:48:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-18 19:48:41 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-18 19:48:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-18 19:48:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-18 19:48:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:48:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:48:41 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-18 19:48:41 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-18 19:48:41 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-18 19:48:41 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-18 19:48:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-18 19:48:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:48:41 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-18 19:48:41 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-18 19:48:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-18 19:48:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-18 19:48:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-18 19:48:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:48:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:48:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:48:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:48:44 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:48:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-18 19:48:44 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-18 19:48:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-18 19:48:44 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-18 19:48:44 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-18 19:48:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-18 19:48:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:48:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:48:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:48:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-18 19:48:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-18 19:48:45 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-18 19:48:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-18 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:48:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-18 19:48:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-18 19:48:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-18 19:48:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-18 19:48:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-18 19:48:45 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-18 19:48:45 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-18 19:48:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.032 0.913 ALFA beam 1: 1.079 1.079 2009-Apr-18 19:48:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.997 0.955 ALFA beam 3: 1.095 1.091 2009-Apr-18 19:48:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.089 0.937 ALFA beam 5: 1.064 0.967 2009-Apr-18 19:48:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.916 0.106 ALFA beam 7: 1.015 0.131 2009-Apr-18 19:48:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-18 19:48:45 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-18 19:48:45 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-18 19:48:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:48:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-18 19:48:45 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-18 19:48:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-18 19:48:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-18 19:48:45 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-18 19:48:45 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-18 19:48:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:48:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-18 19:48:45 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-18 19:48:45 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:09:33.3 LST = 09:10:37.0 diff = -63.7 secs 2009-Apr-18 19:48:45 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Apr-18 19:48:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 19:48:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 19:48:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 19:48:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 19:48:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-18 19:48:45 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-18 19:48:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-18 19:48:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-18 19:48:45 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 19:48:45 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-18 19:48:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-18 19:48:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 19:48:46 INFO2 take_data: Starting WAPP 600-second scan: 910800329 2009-Apr-18 19:48:46 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 19:48:46 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-18 19:48:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 19:48:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:48:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20090418.a2010.0016.fits 2009-Apr-18 19:48:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85727.00 2009-Apr-18 19:48:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-18 19:48:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090418.a2010.0016.fits} 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:48:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:48:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.913 1.079 1.079 2009-Apr-18 19:48:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.955 1.095 1.091 2009-Apr-18 19:48:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.937 1.064 0.967 2009-Apr-18 19:48:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.106 1.015 0.131 2009-Apr-18 19:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-18 19:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-18 19:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:49:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-18 19:49:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 0.914 1.080 1.080 2009-Apr-18 19:49:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.955 1.095 1.090 2009-Apr-18 19:49:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.937 1.063 0.965 2009-Apr-18 19:49:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.105 1.016 0.131 2009-Apr-18 19:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-18 19:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-18 19:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-18 19:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:50:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:50:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.911 1.080 1.077 2009-Apr-18 19:50:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.958 1.092 1.091 2009-Apr-18 19:50:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.936 1.064 0.966 2009-Apr-18 19:50:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.106 1.014 0.131 2009-Apr-18 19:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-18 19:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-18 19:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-18 19:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-18 19:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-18 19:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-18 19:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-18 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-18 19:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-18 19:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 19:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 19:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Apr-18 19:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Apr-18 19:51:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-18 19:51:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.914 1.080 1.077 2009-Apr-18 19:51:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.958 1.121 1.122 2009-Apr-18 19:51:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.938 1.061 0.966 2009-Apr-18 19:51:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.105 1.012 0.131 2009-Apr-18 19:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-18 19:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-18 19:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-18 19:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-18 19:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-18 19:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-18 19:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-18 19:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-18 19:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-18 19:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-18 19:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:52:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:52:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.919 1.089 1.082 2009-Apr-18 19:52:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.963 1.100 1.094 2009-Apr-18 19:52:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.939 1.068 0.974 2009-Apr-18 19:52:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.106 1.014 0.131 2009-Apr-18 19:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-18 19:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-18 19:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-18 19:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-18 19:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:53:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:53:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.918 1.085 1.080 2009-Apr-18 19:53:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.964 1.099 1.096 2009-Apr-18 19:53:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.940 1.063 0.971 2009-Apr-18 19:53:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.106 1.014 0.131 2009-Apr-18 19:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-18 19:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-18 19:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-18 19:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-18 19:54:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:54:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 0.914 1.078 1.078 2009-Apr-18 19:54:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.960 1.093 1.089 2009-Apr-18 19:54:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.936 1.058 0.967 2009-Apr-18 19:54:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.106 1.019 0.131 2009-Apr-18 19:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-18 19:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-18 19:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-18 19:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-18 19:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-18 19:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:55:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:55:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 0.915 1.080 1.080 2009-Apr-18 19:55:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.960 1.091 1.089 2009-Apr-18 19:55:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.935 1.060 0.970 2009-Apr-18 19:55:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.106 1.009 0.131 2009-Apr-18 19:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-18 19:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-18 19:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:56:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:56:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 0.914 1.080 1.082 2009-Apr-18 19:56:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.959 1.091 1.089 2009-Apr-18 19:56:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.936 1.061 0.972 2009-Apr-18 19:56:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.106 1.009 0.131 2009-Apr-18 19:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-18 19:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-18 19:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-18 19:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-18 19:58:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:58:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.918 1.082 1.081 2009-Apr-18 19:58:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.962 1.094 1.092 2009-Apr-18 19:58:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.938 1.060 0.975 2009-Apr-18 19:58:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.106 1.010 0.132 2009-Apr-18 19:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-18 19:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-18 19:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-18 19:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-18 19:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-18 19:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-18 19:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-18 19:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 19:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-18 19:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-18 19:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-18 19:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-18 19:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-18 19:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 19:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-18 19:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-18 19:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-18 19:58:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:58:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 19:58:47 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-18 19:58:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 19:58:47 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-18 19:58:47 LOG1 fixed_driftmap: New position: year = 2009.2979671141024 RA = 09:20:08.3 RA/Dec = 09:20:41.5 +21:44:18.8 2009-Apr-18 19:58:47 NOTE fixed_driftmap: Correcting ZA to 3:23:05.0 ... 2009-Apr-18 19:58:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.3847357632 -CF 2009-Apr-18 19:58:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-18 19:58:47 START begin_task: Starting task 'WAPP calibration' 2009-Apr-18 19:58:47 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-18 19:58:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-18 19:58:47 START begin_task: Starting task 'selecting calibration type' 2009-Apr-18 19:58:47 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-18 19:58:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-18 19:58:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-18 19:58:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:58:47 START begin_task: Starting task 'waiting on setcal' 2009-Apr-18 19:58:47 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-18 19:58:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.3847357632 -CF 2009-Apr-18 19:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:58:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-18 19:58:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 19:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:58:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 19:58:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-18 19:58:47 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-18 19:58:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-18 19:58:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:58:48 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-18 19:58:48 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:58:48 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 19:58:48 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:58:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:58:48 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:58:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-18 19:58:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 19:58:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:58:48 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 19:58:48 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 19:58:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 19:58:48 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 19:58:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 19:58:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-18 19:58:48 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-18 19:58:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-18 19:58:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-18 19:58:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:58:48 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:58:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-18 19:58:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:58:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:58:48 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-18 19:58:48 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 19:58:48 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-18 19:58:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 19:58:48 INFO2 take_data: Starting WAPP 1-second scan: 910800330 2009-Apr-18 19:58:48 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 19:58:48 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-18 19:58:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:58:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-18 19:58:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86329.00 2009-Apr-18 19:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:58:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 19:58:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 19:58:50 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-18 19:58:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 19:58:50 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-18 19:58:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-18 19:58:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 19:58:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 19:58:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 19:58:50 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-18 19:58:50 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 19:58:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 19:58:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 19:58:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 19:58:50 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-18 19:58:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-18 19:58:50 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-18 19:58:50 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-18 19:58:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-18 19:58:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 19:58:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-18 19:58:50 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-18 19:58:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-18 19:58:50 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-18 19:58:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 19:58:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 19:58:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 19:58:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 19:58:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-18 19:58:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-18 19:58:51 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 19:58:51 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-18 19:58:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-18 19:58:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 19:58:51 INFO2 take_data: Starting WAPP 600-second scan: 910800331 2009-Apr-18 19:58:51 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 19:58:51 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-18 19:58:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 19:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.547 (still bad) 2009-Apr-18 19:58:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 19:58:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-18 19:58:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86332.00 2009-Apr-18 19:58:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20090418.a2010.0017.fits 2009-Apr-18 19:58:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090418.a2010.0017.fits} 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 19:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.547 (still bad) 2009-Apr-18 19:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 19:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-18 19:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-18 19:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-18 19:59:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 19:59:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.918 1.081 1.084 2009-Apr-18 19:59:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.963 1.103 1.106 2009-Apr-18 19:59:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.951 1.088 1.007 2009-Apr-18 19:59:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.106 1.011 0.132 2009-Apr-18 19:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 19:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 19:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-18 19:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-18 19:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-18 19:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-18 19:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 19:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-18 19:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 19:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-18 19:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-18 19:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-18 19:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-18 19:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 19:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-18 19:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-18 19:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-18 19:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-18 19:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-18 19:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-18 19:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-18 19:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-18 19:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-18 19:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-18 20:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-18 20:00:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 20:00:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.918 1.081 1.084 2009-Apr-18 20:00:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.961 1.093 1.105 2009-Apr-18 20:00:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.940 1.068 0.962 2009-Apr-18 20:00:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.106 1.010 0.132 2009-Apr-18 20:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-18 20:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-18 20:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-18 20:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-18 20:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-18 20:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-18 20:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-18 20:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-18 20:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-18 20:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-18 20:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-18 20:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-18 20:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-18 20:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Apr-18 20:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-18 20:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Apr-18 20:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Apr-18 20:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-18 20:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-18 20:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-18 20:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-18 20:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 20:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-18 20:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-18 20:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Apr-18 20:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Apr-18 20:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-18 20:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Apr-18 20:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-18 20:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Apr-18 20:01:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:01:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 0.916 1.103 1.104 2009-Apr-18 20:01:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.964 1.097 1.113 2009-Apr-18 20:01:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.942 1.063 0.990 2009-Apr-18 20:01:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.107 1.013 0.132 2009-Apr-18 20:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-18 20:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-18 20:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 20:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 20:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 20:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 20:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Apr-18 20:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Apr-18 20:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-18 20:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Apr-18 20:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-18 20:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Apr-18 20:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-18 20:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Apr-18 20:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Apr-18 20:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-18 20:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Apr-18 20:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Apr-18 20:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Apr-18 20:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-18 20:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:02:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:02:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.918 1.084 1.087 2009-Apr-18 20:02:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.966 1.093 1.121 2009-Apr-18 20:02:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.941 1.063 0.989 2009-Apr-18 20:02:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.107 1.011 0.132 2009-Apr-18 20:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:03:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:03:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.918 1.087 1.088 2009-Apr-18 20:03:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.970 1.098 1.122 2009-Apr-18 20:03:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.944 1.066 0.993 2009-Apr-18 20:03:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.107 1.013 0.133 2009-Apr-18 20:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-18 20:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:04:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:04:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.918 1.081 1.088 2009-Apr-18 20:04:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.970 1.094 1.119 2009-Apr-18 20:04:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.943 1.064 0.988 2009-Apr-18 20:04:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.107 1.009 0.133 2009-Apr-18 20:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-18 20:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-18 20:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-18 20:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:05:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:05:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.915 1.082 1.087 2009-Apr-18 20:05:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.968 1.094 1.118 2009-Apr-18 20:05:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.941 1.063 0.985 2009-Apr-18 20:05:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.107 1.009 0.132 2009-Apr-18 20:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 20:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-18 20:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-18 20:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-18 20:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:06:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:06:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.914 1.081 1.085 2009-Apr-18 20:06:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.972 1.093 1.120 2009-Apr-18 20:06:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.941 1.064 0.983 2009-Apr-18 20:06:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.107 1.011 0.132 2009-Apr-18 20:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-18 20:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:07:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:07:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.918 1.083 1.090 2009-Apr-18 20:07:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.969 1.096 1.122 2009-Apr-18 20:07:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.945 1.064 0.987 2009-Apr-18 20:07:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.107 1.012 0.132 2009-Apr-18 20:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:08:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 20:08:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.919 1.081 1.088 2009-Apr-18 20:08:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.970 1.094 1.123 2009-Apr-18 20:08:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.942 1.065 0.984 2009-Apr-18 20:08:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.106 1.011 0.132 2009-Apr-18 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-18 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-18 20:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-18 20:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-18 20:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-18 20:08:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:08:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:08:52 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-18 20:08:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:08:52 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-18 20:08:52 LOG1 fixed_driftmap: New position: year = 2009.2979862853956 RA = 09:30:15.0 RA/Dec = 09:30:48.1 +21:44:13.2 2009-Apr-18 20:08:52 NOTE fixed_driftmap: Correcting ZA to 3:22:59.5 ... 2009-Apr-18 20:08:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.3831853201 -CF 2009-Apr-18 20:08:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-18 20:08:52 START begin_task: Starting task 'WAPP calibration' 2009-Apr-18 20:08:52 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-18 20:08:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-18 20:08:52 START begin_task: Starting task 'selecting calibration type' 2009-Apr-18 20:08:52 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-18 20:08:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-18 20:08:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-18 20:08:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:08:52 START begin_task: Starting task 'waiting on setcal' 2009-Apr-18 20:08:52 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-18 20:08:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.3831853201 -CF 2009-Apr-18 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:08:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-18 20:08:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:08:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 20:08:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-18 20:08:52 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-18 20:08:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-18 20:08:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:08:52 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-18 20:08:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:08:52 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-18 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:08:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:08:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:08:53 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:08:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-18 20:08:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:08:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:08:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:08:53 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:08:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:08:53 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:08:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:08:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-18 20:08:53 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-18 20:08:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-18 20:08:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-18 20:08:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:08:53 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:08:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-18 20:08:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:08:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:08:53 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-18 20:08:53 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 20:08:53 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-18 20:08:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 20:08:53 INFO2 take_data: Starting WAPP 1-second scan: 910800332 2009-Apr-18 20:08:53 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 20:08:53 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-18 20:08:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 20:08:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-18 20:08:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 534.00 2009-Apr-18 20:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 20:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 20:08:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:08:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:08:55 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-18 20:08:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:08:55 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-18 20:08:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-18 20:08:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 20:08:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 20:08:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:08:55 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-18 20:08:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:08:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 20:08:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:08:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:08:56 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-18 20:08:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-18 20:08:56 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-18 20:08:56 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-18 20:08:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-18 20:08:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 20:08:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-18 20:08:56 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-18 20:08:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-18 20:08:56 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-18 20:08:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 20:08:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 20:08:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 20:08:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 20:08:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-18 20:08:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-18 20:08:56 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 20:08:56 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-18 20:08:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-18 20:08:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 20:08:56 INFO2 take_data: Starting WAPP 600-second scan: 910800333 2009-Apr-18 20:08:56 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 20:08:56 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-18 20:08:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 20:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.559 (still bad) 2009-Apr-18 20:08:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 20:08:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-18 20:08:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 537.00 2009-Apr-18 20:08:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20090418.a2010.0018.fits 2009-Apr-18 20:08:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090418.a2010.0018.fits} 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 20:08:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 20:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.559 (still bad) 2009-Apr-18 20:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:09:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:09:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.920 1.092 1.100 2009-Apr-18 20:09:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.968 1.098 1.130 2009-Apr-18 20:09:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.951 1.067 0.988 2009-Apr-18 20:09:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.014 0.133 2009-Apr-18 20:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:10:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.920 1.084 1.089 2009-Apr-18 20:10:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.968 1.097 1.123 2009-Apr-18 20:10:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.945 1.063 0.988 2009-Apr-18 20:10:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.107 1.013 0.133 2009-Apr-18 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:11:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:11:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 0.926 1.083 1.093 2009-Apr-18 20:11:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.968 1.101 1.130 2009-Apr-18 20:11:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.948 1.068 0.989 2009-Apr-18 20:11:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.107 1.013 0.133 2009-Apr-18 20:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:12:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.927 1.088 1.097 2009-Apr-18 20:12:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.969 1.097 1.124 2009-Apr-18 20:12:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.947 1.070 0.990 2009-Apr-18 20:12:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.107 1.017 0.133 2009-Apr-18 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:13:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:13:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 0.925 1.084 1.093 2009-Apr-18 20:13:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.969 1.094 1.123 2009-Apr-18 20:13:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.946 1.069 0.989 2009-Apr-18 20:13:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.107 1.013 0.133 2009-Apr-18 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:14:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.925 1.085 1.093 2009-Apr-18 20:14:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.968 1.097 1.128 2009-Apr-18 20:14:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.944 1.065 0.989 2009-Apr-18 20:14:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.107 1.012 0.133 2009-Apr-18 20:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:15:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.925 1.085 1.092 2009-Apr-18 20:15:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.970 1.095 1.128 2009-Apr-18 20:15:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.945 1.070 0.990 2009-Apr-18 20:15:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.107 1.014 0.133 2009-Apr-18 20:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-18 20:16:10 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:16:10.298 (seconds: 72970.298)!} 2009-Apr-18 20:16:10 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:16:10.298 (seconds: 72970.298)! 2009-Apr-18 20:16:11 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 72969.0 to 72970.0! 2009-Apr-18 20:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:16:12 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (72969.0 - 72971.0)! 2009-Apr-18 20:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-18 20:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:16:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:16:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 0.925 1.087 1.094 2009-Apr-18 20:16:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.969 1.102 1.133 2009-Apr-18 20:16:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.952 1.071 0.989 2009-Apr-18 20:16:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.107 1.016 0.134 2009-Apr-18 20:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-18 20:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:17:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:17:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.927 1.085 1.094 2009-Apr-18 20:17:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.968 1.096 1.127 2009-Apr-18 20:17:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.954 1.069 0.991 2009-Apr-18 20:17:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.015 0.133 2009-Apr-18 20:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:18:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:18:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.924 1.087 1.094 2009-Apr-18 20:18:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.969 1.096 1.131 2009-Apr-18 20:18:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.947 1.069 0.991 2009-Apr-18 20:18:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.015 0.133 2009-Apr-18 20:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:18:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:18:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:18:57 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-18 20:18:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:18:57 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-18 20:18:57 LOG1 fixed_driftmap: New position: year = 2009.2980054566888 RA = 09:40:21.8 RA/Dec = 09:40:54.8 +21:44:07.9 2009-Apr-18 20:18:57 NOTE fixed_driftmap: Correcting ZA to 3:22:54.2 ... 2009-Apr-18 20:18:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.3817117868 -CF 2009-Apr-18 20:18:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-18 20:18:57 START begin_task: Starting task 'WAPP calibration' 2009-Apr-18 20:18:57 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-18 20:18:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-18 20:18:57 START begin_task: Starting task 'selecting calibration type' 2009-Apr-18 20:18:57 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-18 20:18:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-18 20:18:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-18 20:18:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:18:57 START begin_task: Starting task 'waiting on setcal' 2009-Apr-18 20:18:57 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-18 20:18:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.3817117868 -CF 2009-Apr-18 20:18:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:18:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-18 20:18:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:18:58 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 20:18:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-18 20:18:58 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-18 20:18:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:18:58 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-18 20:18:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:18:58 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:18:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:18:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:18:58 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:18:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-18 20:18:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:18:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:18:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:18:58 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:18:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:18:58 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:18:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:18:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-18 20:18:58 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-18 20:18:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-18 20:18:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-18 20:18:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:18:58 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:18:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-18 20:18:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:18:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:18:58 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-18 20:18:58 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 20:18:58 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-18 20:18:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-18 20:18:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 20:18:58 INFO2 take_data: Starting WAPP 1-second scan: 910800334 2009-Apr-18 20:18:59 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 20:18:59 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-18 20:18:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 20:18:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-18 20:18:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1140.00 2009-Apr-18 20:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 20:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 20:19:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:19:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:19:01 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-18 20:19:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:19:01 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-18 20:19:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-18 20:19:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 20:19:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 20:19:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:19:01 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-18 20:19:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:19:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 20:19:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:19:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:19:01 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-18 20:19:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-18 20:19:01 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-18 20:19:01 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-18 20:19:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-18 20:19:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 20:19:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-18 20:19:01 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-18 20:19:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-18 20:19:01 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-18 20:19:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 20:19:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 20:19:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 20:19:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 20:19:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-18 20:19:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-18 20:19:02 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 20:19:02 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-18 20:19:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-18 20:19:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 20:19:02 INFO2 take_data: Starting WAPP 600-second scan: 910800335 2009-Apr-18 20:19:02 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 20:19:02 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-18 20:19:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 20:19:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 20:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.562 (still bad) 2009-Apr-18 20:19:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-18 20:19:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1143.00 2009-Apr-18 20:19:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20090418.a2010.0019.fits 2009-Apr-18 20:19:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090418.a2010.0019.fits} 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 20:19:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 20:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.562 (still bad) 2009-Apr-18 20:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:19:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:19:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.931 1.085 1.093 2009-Apr-18 20:19:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.970 1.096 1.130 2009-Apr-18 20:19:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.948 1.071 0.989 2009-Apr-18 20:19:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.107 1.016 0.133 2009-Apr-18 20:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-18 20:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-18 20:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-18 20:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-18 20:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-18 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:20:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:20:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 0.976 1.084 1.092 2009-Apr-18 20:20:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.969 1.096 1.130 2009-Apr-18 20:20:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.958 1.070 0.989 2009-Apr-18 20:20:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.015 0.133 2009-Apr-18 20:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-18 20:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:21:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.921 1.084 1.090 2009-Apr-18 20:21:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.970 1.097 1.124 2009-Apr-18 20:21:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.946 1.068 0.989 2009-Apr-18 20:21:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.107 1.018 0.133 2009-Apr-18 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:22:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:22:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.925 1.086 1.092 2009-Apr-18 20:22:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.970 1.095 1.124 2009-Apr-18 20:22:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.943 1.070 0.988 2009-Apr-18 20:22:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.107 1.017 0.133 2009-Apr-18 20:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:23:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 0.928 1.086 1.092 2009-Apr-18 20:23:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.969 1.096 1.123 2009-Apr-18 20:23:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.947 1.071 0.987 2009-Apr-18 20:23:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.107 1.019 0.133 2009-Apr-18 20:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-18 20:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-18 20:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:24:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:24:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.923 1.087 1.094 2009-Apr-18 20:24:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.970 1.097 1.130 2009-Apr-18 20:24:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.945 1.069 0.987 2009-Apr-18 20:24:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.016 0.133 2009-Apr-18 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-18 20:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-18 20:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:25:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:25:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.920 1.081 1.091 2009-Apr-18 20:25:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.967 1.096 1.127 2009-Apr-18 20:25:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.945 1.069 0.985 2009-Apr-18 20:25:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.107 1.014 0.133 2009-Apr-18 20:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:26:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.922 1.085 1.089 2009-Apr-18 20:26:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.969 1.098 1.126 2009-Apr-18 20:26:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.948 1.069 0.987 2009-Apr-18 20:26:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.014 0.133 2009-Apr-18 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:27:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:27:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.923 1.090 1.097 2009-Apr-18 20:27:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.971 1.100 1.125 2009-Apr-18 20:27:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.951 1.070 0.986 2009-Apr-18 20:27:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.017 0.133 2009-Apr-18 20:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-18 20:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:28:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:28:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.923 1.084 1.093 2009-Apr-18 20:28:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.968 1.094 1.124 2009-Apr-18 20:28:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.947 1.068 0.987 2009-Apr-18 20:28:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.015 0.132 2009-Apr-18 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:29:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:29:03 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-18 20:29:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:29:03 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-18 20:29:03 LOG1 fixed_driftmap: New position: year = 2009.2980246596699 RA = 09:50:29.6 RA/Dec = 09:51:02.5 +21:44:02.8 2009-Apr-18 20:29:03 NOTE fixed_driftmap: Correcting ZA to 3:22:49.1 ... 2009-Apr-18 20:29:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.3803157836 -CF 2009-Apr-18 20:29:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-18 20:29:03 START begin_task: Starting task 'WAPP calibration' 2009-Apr-18 20:29:03 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-18 20:29:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-18 20:29:03 START begin_task: Starting task 'selecting calibration type' 2009-Apr-18 20:29:03 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-18 20:29:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-18 20:29:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-18 20:29:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:29:03 START begin_task: Starting task 'waiting on setcal' 2009-Apr-18 20:29:03 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-18 20:29:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.3803157836 -CF 2009-Apr-18 20:29:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:29:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-18 20:29:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:29:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:29:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 20:29:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-18 20:29:03 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-18 20:29:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-18 20:29:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:29:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-18 20:29:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:29:03 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-18 20:29:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:29:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:29:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:29:04 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:29:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-18 20:29:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:29:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:29:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:29:04 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:29:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:29:04 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:29:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:29:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-18 20:29:04 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-18 20:29:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-18 20:29:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-18 20:29:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:29:04 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:29:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-18 20:29:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:29:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:29:04 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-18 20:29:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 20:29:04 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-18 20:29:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 20:29:04 INFO2 take_data: Starting WAPP 1-second scan: 910800336 2009-Apr-18 20:29:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 20:29:04 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-18 20:29:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 20:29:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-18 20:29:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1745.00 2009-Apr-18 20:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 20:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 20:29:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:29:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:29:06 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-18 20:29:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:29:06 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-18 20:29:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-18 20:29:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 20:29:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 20:29:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:29:06 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-18 20:29:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:29:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 20:29:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:29:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:29:06 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-18 20:29:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-18 20:29:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-18 20:29:06 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-18 20:29:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-18 20:29:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-18 20:29:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-18 20:29:06 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-18 20:29:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Apr-18 20:29:06 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Apr-18 20:29:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-18 20:29:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-18 20:29:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-18 20:29:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-18 20:29:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-18 20:29:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-18 20:29:07 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 20:29:07 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-18 20:29:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-18 20:29:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 20:29:07 INFO2 take_data: Starting WAPP 600-second scan: 910800337 2009-Apr-18 20:29:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 20:29:07 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-18 20:29:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-18 20:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 20:29:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-18 20:29:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1748.00 2009-Apr-18 20:29:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20090418.a2010.0020.fits 2009-Apr-18 20:29:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090418.a2010.0020.fits} 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 20:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.554 (still bad) 2009-Apr-18 20:29:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 20:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-18 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:29:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.924 1.084 1.092 2009-Apr-18 20:29:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.968 1.098 1.120 2009-Apr-18 20:29:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.945 1.072 0.987 2009-Apr-18 20:29:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.107 1.015 0.133 2009-Apr-18 20:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:30:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:30:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.930 1.086 1.091 2009-Apr-18 20:30:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.970 1.097 1.122 2009-Apr-18 20:30:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.947 1.071 0.987 2009-Apr-18 20:30:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.107 1.017 0.133 2009-Apr-18 20:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-18 20:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:31:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.931 1.090 1.095 2009-Apr-18 20:31:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.973 1.102 1.121 2009-Apr-18 20:31:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.952 1.071 0.989 2009-Apr-18 20:31:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.107 1.021 0.133 2009-Apr-18 20:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-18 20:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-18 20:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-18 20:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:32:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.928 1.090 1.097 2009-Apr-18 20:32:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.971 1.097 1.117 2009-Apr-18 20:32:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.951 1.073 0.985 2009-Apr-18 20:32:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.107 1.016 0.132 2009-Apr-18 20:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-18 20:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 20:33:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.933 1.086 1.090 2009-Apr-18 20:33:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.969 1.099 1.117 2009-Apr-18 20:33:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.948 1.068 0.983 2009-Apr-18 20:33:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.106 1.017 0.132 2009-Apr-18 20:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-18 20:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:34:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:34:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.928 1.084 1.090 2009-Apr-18 20:34:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.970 1.100 1.121 2009-Apr-18 20:34:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.950 1.070 0.985 2009-Apr-18 20:34:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.107 1.015 0.133 2009-Apr-18 20:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-18 20:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-18 20:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:35:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.929 1.089 1.089 2009-Apr-18 20:35:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.969 1.101 1.121 2009-Apr-18 20:35:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.952 1.071 0.985 2009-Apr-18 20:35:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.107 1.018 0.133 2009-Apr-18 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-18 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:36:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 20:36:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.931 1.088 1.090 2009-Apr-18 20:36:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.971 1.102 1.118 2009-Apr-18 20:36:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.949 1.069 0.982 2009-Apr-18 20:36:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.106 1.019 0.133 2009-Apr-18 20:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 20:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-18 20:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-18 20:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-18 20:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-18 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-18 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-18 20:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 20:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:37:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-18 20:37:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.932 1.086 1.089 2009-Apr-18 20:37:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.972 1.106 1.120 2009-Apr-18 20:37:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.950 1.082 0.993 2009-Apr-18 20:37:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.107 1.018 0.133 2009-Apr-18 20:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-18 20:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-18 20:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-18 20:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-18 20:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-18 20:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-18 20:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-18 20:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-18 20:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-18 20:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-18 20:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-18 20:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-18 20:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-18 20:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-18 20:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 20:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 20:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 20:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 20:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:38:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-18 20:38:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 0.928 1.088 1.089 2009-Apr-18 20:38:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.970 1.103 1.115 2009-Apr-18 20:38:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.950 1.086 0.992 2009-Apr-18 20:38:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.106 1.023 0.132 2009-Apr-18 20:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-18 20:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-18 20:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:39:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:39:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:39:08 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-18 20:39:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:39:08 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-18 20:39:08 LOG1 fixed_driftmap: New position: year = 2009.298043830963 RA = 10:00:36.4 RA/Dec = 10:01:09.1 +21:43:58.1 2009-Apr-18 20:39:08 NOTE fixed_driftmap: Correcting ZA to 3:22:44.4 ... 2009-Apr-18 20:39:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.3790046347 -CF 2009-Apr-18 20:39:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-18 20:39:08 START begin_task: Starting task 'WAPP calibration' 2009-Apr-18 20:39:08 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-18 20:39:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-18 20:39:08 START begin_task: Starting task 'selecting calibration type' 2009-Apr-18 20:39:08 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-18 20:39:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-18 20:39:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-18 20:39:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:39:08 START begin_task: Starting task 'waiting on setcal' 2009-Apr-18 20:39:08 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-18 20:39:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.3790046347 -CF 2009-Apr-18 20:39:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:39:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-18 20:39:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-18 20:39:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:39:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-18 20:39:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-18 20:39:08 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-18 20:39:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-18 20:39:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:39:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-18 20:39:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:39:08 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-18 20:39:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:39:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:39:09 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:39:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-18 20:39:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-18 20:39:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:39:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-18 20:39:09 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-18 20:39:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-18 20:39:09 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-18 20:39:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-18 20:39:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-18 20:39:09 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-18 20:39:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-18 20:39:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-18 20:39:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:39:09 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:39:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-18 20:39:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:39:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:39:09 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-18 20:39:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-18 20:39:09 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-18 20:39:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-18 20:39:09 INFO2 take_data: Starting WAPP 1-second scan: 910800338 2009-Apr-18 20:39:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-18 20:39:09 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-18 20:39:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-18 20:39:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-18 20:39:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2350.00 2009-Apr-18 20:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.191303 MHz 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1054.748083 MHz 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 965.251752 MHz 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1830.000000 MHz 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1880.000000 MHz 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1930.000000 MHz 2009-Apr-18 20:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1980.000000 MHz 2009-Apr-18 20:39:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-18 20:39:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-18 20:39:11 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-18 20:39:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-18 20:39:11 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-18 20:39:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-18 20:39:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-18 20:39:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-18 20:39:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-18 20:39:11 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-18 20:39:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-18 20:39:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-18 20:39:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-18 20:39:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-18 20:39:11 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-18 20:39:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-18 20:39:11 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-18 20:39:11 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-18 20:39:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-18 20:39:11 LOG4 send_obs_status: To