2009-Apr-17 00:08:40 BEGIN executive: CIMA executive starting ... 2009-Apr-17 00:08:40 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-17 00:08:41 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-17 00:08:41 INFO4 executive: This is an ON-LINE session 2009-Apr-17 00:08:41 INFO4 executive: This is a LOCAL session 2009-Apr-17 00:08:41 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-17 00:08:41 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2009-Apr-17 00:08:41 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090417' 2009-Apr-17 00:08:41 LOG2 log_preferences: Currently applied preferences: 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-17 00:08:41 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-17 00:08:41 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-17 00:08:41 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-17 00:08:41 ALERT executive: CIMA executive ready 2009-Apr-17 00:08:42 NOTE frontend: CIMA frontend ready 2009-Apr-17 00:08:44 LOG4 got_cormsg: From DATATAKING: vw% setup 2009-Apr-17 00:08:45 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-17 00:08:45 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-17 00:08:45 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-17 00:08:45 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-17 00:08:45 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-17 00:08:45 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-17 00:08:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-17 00:08:45 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-17 00:08:45 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-17 00:08:45 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-17 00:08:45 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-17 00:08:45 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-17 00:08:45 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-17 00:08:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-17 00:08:45 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-17 00:08:45 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-17 00:08:49 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-17 00:08:49 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-17 00:08:49 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-17 00:08:49 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-17 00:08:49 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-17 00:08:49 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-17 00:08:49 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-17 00:08:49 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-17 00:08:49 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-17 00:08:49 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-17 00:08:51 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-17 00:08:51 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:08:52 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-17 00:08:52 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-17 00:08:52 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-17 00:08:52 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-17 00:08:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:02 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-17 00:09:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-17 00:09:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-17 00:09:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-17 00:09:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-17 00:09:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-17 00:09:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-17 00:09:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-17 00:09:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-17 00:09:04 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-17 00:09:04 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-17 00:09:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-17 00:09:04 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-17 00:09:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-17 00:09:04 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-17 00:09:04 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-17 00:09:04 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-17 00:09:04 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-17 00:09:04 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-17 00:09:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-17 00:09:04 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-17 00:09:04 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-17 00:09:04 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-17 00:09:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:09:04 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-17 00:09:04 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-17 00:09:04 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-17 00:09:04 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-17 00:09:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-17 00:09:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:09:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:09:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:09:04 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:09:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:09:04 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-17 00:09:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:09:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-17 00:09:04 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-17 00:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-17 00:09:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-17 00:09:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:09:04 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-17 00:09:04 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-17 00:09:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:09:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:09:20 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-17 00:09:20 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-17 00:09:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-17 00:09:20 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-17 00:09:20 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-17 00:09:20 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-17 00:09:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-17 00:09:20 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-17 00:09:20 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-17 00:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-17 00:09:21 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-17 00:09:21 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-17 00:09:21 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-17 00:09:21 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-17 00:09:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-17 00:09:21 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-17 00:09:21 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-17 00:09:21 START begin_task: Starting task 'selecting calibration port' 2009-Apr-17 00:09:21 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-17 00:09:21 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-17 00:09:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-17 00:09:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:09:21 START begin_task: Starting task 'waiting on calport' 2009-Apr-17 00:09:21 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-17 00:09:21 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-17 00:09:21 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-17 00:09:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:09:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:09:21 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-17 00:09:21 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-17 00:09:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-17 00:09:21 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-17 00:09:21 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-17 00:09:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 00:09:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 00:09:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:09:21 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-17 00:09:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:09:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 00:09:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:09:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:09:21 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-17 00:09:21 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-17 00:09:21 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-17 00:09:22 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-17 00:09:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:09:22 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-17 00:09:22 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:09:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 00:09:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:09:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:09:22 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:22 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-17 00:09:22 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-17 00:09:22 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-17 00:09:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-17 00:09:22 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-17 00:09:22 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-17 00:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-17 00:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-17 00:09:22 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-17 00:09:22 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-17 00:09:22 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-17 00:09:22 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-17 00:09:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-17 00:09:22 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-17 00:09:22 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-17 00:09:22 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-17 00:09:22 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-17 00:09:22 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-17 00:09:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-17 00:09:22 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-17 00:09:22 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-17 00:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:09:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0000.fits 2009-Apr-17 00:09:23 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090417.a2010.0000.fits} 2009-Apr-17 00:09:23 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-17 00:09:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-17 00:09:23 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-17 00:09:47 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-17 00:09:47 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-17 00:09:47 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-17 00:09:47 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-17 00:09:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-17 00:09:47 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-17 00:09:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-17 00:09:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-17 00:09:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:09:47 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-17 00:09:47 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-17 00:09:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-17 00:09:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:09:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:09:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-17 00:09:50 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-17 00:09:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-17 00:09:50 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-17 00:09:50 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-17 00:09:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-17 00:09:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:09:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:09:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:09:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:09:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-17 00:09:50 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-17 00:09:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-17 00:09:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-17 00:09:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-17 00:09:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-17 00:09:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-17 00:09:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-17 00:09:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-17 00:09:50 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-17 00:09:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.002 0.916 ALFA beam 1: 1.076 1.073 2009-Apr-17 00:09:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.042 0.980 ALFA beam 3: 1.079 1.084 2009-Apr-17 00:09:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.087 0.932 ALFA beam 5: 1.065 0.916 2009-Apr-17 00:09:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.896 0.104 ALFA beam 7: 1.007 0.127 2009-Apr-17 00:09:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-17 00:09:50 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-17 00:09:50 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-17 00:09:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:09:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-17 00:09:50 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-17 00:09:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-17 00:09:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-17 00:09:50 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-17 00:09:50 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-17 00:09:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-17 00:09:50 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-17 00:09:50 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-17 00:09:51 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2009-Apr-17 00:09:51 LOG4 exec_msg: From OBSERVER: new_file manual 2009-Apr-17 00:09:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:09:51 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20090417.a2010.0000.fits' is empty! 2009-Apr-17 00:09:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:09:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-17 00:09:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.916 1.076 1.073 2009-Apr-17 00:09:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.980 1.079 1.084 2009-Apr-17 00:09:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.932 1.065 0.916 2009-Apr-17 00:09:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.896 0.104 1.007 0.127 2009-Apr-17 00:09:54 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-17 00:09:54 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 132400.0 +221554 J 0 Topocentric velocity(optical) 2009-Apr-17 00:09:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 132400.0 +221554 J 0 Topocentric velocity(optical)' 2009-Apr-17 00:09:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-17 00:09:54 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-17 00:09:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift92p1' 2009-Apr-17 00:09:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-17 00:09:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift92p1} 2009-Apr-17 00:09:54 INFO5 fixed_driftmap: Start: year = 2009.2929688569473 RA = 13:24:29.0 Dec = +22:12:47.6 2009-Apr-17 00:09:54 NOTE fixed_driftmap: Setting ZA to 3:51:33.9 ... 2009-Apr-17 00:09:54 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 3.86 2009-Apr-17 00:09:54 LOG3 track_source: Calling 'track_source drift92p1 180.0 3.8594057328 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-17 00:09:54 START begin_task: Starting task 'sending tracking commands' 2009-Apr-17 00:09:54 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-17 00:09:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Slewing to source 'drift92p1' ...} 2009-Apr-17 00:09:54 INFO1 track_source: Starting to track drift92p1 2009-Apr-17 00:09:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p1" 2009-Apr-17 00:09:54 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-17 00:09:54 LOG3 vw_send: To DATATAKING: set dec 3.8594057328 2009-Apr-17 00:09:54 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-17 00:09:54 LOG3 vw_send: To DATATAKING: pnt tr 180.0 3.8594057328 -CF 2009-Apr-17 00:09:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-17 00:09:54 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-17 00:09:54 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-17 00:09:54 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-17 00:09:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:09:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-17 00:09:54 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-17 00:09:54 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-17 00:09:54 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-17 00:09:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-17 00:09:54 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-17 00:09:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-17 00:09:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-17 00:09:55 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-17 00:09:55 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p1" 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: set dec 3.8594057328 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: vw% 3.8594057328 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 3.8594057328 -CF 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-17 00:09:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:09:55 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-17 00:09:55 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-17 00:09:55 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-17 00:09:55 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-17 00:09:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-17 00:09:55 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-17 00:09:55 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-17 00:09:55 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-17 00:09:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:09:55 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-17 00:09:55 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-17 00:09:55 START begin_task: Starting task 'waiting on telescope' 2009-Apr-17 00:09:55 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-17 00:09:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-17 00:09:55 LOG3 waittrk: Start waittrk 5 2009-Apr-17 00:09:55 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-17 00:09:55 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-17 00:10:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-17 00:10:00 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-17 00:10:01 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-17 00:10:01 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-17 00:10:02 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-17 00:10:02 INFO2 waittrk: Now tracking drift92p1 2009-Apr-17 00:10:02 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 3.88 2009-Apr-17 00:10:02 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-17 00:10:02 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-17 00:10:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:10:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-17 00:10:02 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 00:10:02 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 00:10:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 00:10:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:10:02 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 00:10:02 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 00:10:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:10:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:10:02 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:10:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 00:10:02 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 00:10:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:10:02 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 00:10:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:10:02 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:10:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:10:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:10:02 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:10:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 00:10:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:10:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:10:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:10:02 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:10:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:10:02 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:10:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:10:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 00:10:02 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-17 00:10:02 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-17 00:10:02 LOG5 antvel: Calling 'antvel 180.000000 3.859406 F Topocentric 0' 2009-Apr-17 00:10:02 LOG2 antvel: Transforming current Az = 180.00 ZA = 3.86 to apparent RA = 13:24:43.8 Dec = +22:12:47.6 2009-Apr-17 00:10:02 LOG2 antvel: Parameters to Doppler: Topocentric 15002 2009 107 0.0 2009-Apr-17 00:10:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-17 00:10:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-17 00:10:02 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-17 00:10:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-17 00:10:02 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-17 00:10:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-17 00:10:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-17 00:10:02 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-17 00:10:02 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-17 00:10:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-17 00:10:02 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-17 00:10:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-17 00:10:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-17 00:10:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:10:03 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-17 00:10:03 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-17 00:10:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-17 00:10:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-17 00:10:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-17 00:10:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:10:05 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:10:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-17 00:10:05 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-17 00:10:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-17 00:10:05 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-17 00:10:05 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-17 00:10:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-17 00:10:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:10:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:10:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:10:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-17 00:10:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-17 00:10:06 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-17 00:10:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-17 00:10:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:10:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-17 00:10:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-17 00:10:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-17 00:10:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-17 00:10:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-17 00:10:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-17 00:10:06 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-17 00:10:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.020 0.929 ALFA beam 1: 1.072 1.071 2009-Apr-17 00:10:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.962 ALFA beam 3: 1.097 1.103 2009-Apr-17 00:10:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.105 0.953 ALFA beam 5: 1.069 0.931 2009-Apr-17 00:10:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.916 0.106 ALFA beam 7: 1.023 0.130 2009-Apr-17 00:10:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-17 00:10:06 LOG5 finish_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-17 00:10:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-17 00:10:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:10:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-17 00:10:06 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-17 00:10:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 00:10:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-17 00:10:06 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-17 00:10:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-17 00:10:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:10:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-17 00:10:06 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-17 00:10:06 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 13:24:29.0 LST = 13:24:47.9 diff = -18.8 secs 2009-Apr-17 00:10:06 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Apr-17 00:10:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:10:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:10:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:10:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:10:06 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090417.a2010.0000.fits' is empty! 2009-Apr-17 00:10:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-17 00:10:06 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-17 00:10:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 00:10:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 00:10:06 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:10:06 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-17 00:10:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 00:10:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:10:07 INFO2 take_data: Starting WAPP 600-second scan: 910700002 2009-Apr-17 00:10:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:10:07 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-17 00:10:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:10:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:10:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 00:10:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15008.00 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:10:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:10:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.922 1.080 1.077 2009-Apr-17 00:10:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.968 1.103 1.114 2009-Apr-17 00:10:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.960 1.072 0.935 2009-Apr-17 00:10:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.106 1.026 0.130 2009-Apr-17 00:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:11:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:11:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.916 1.082 1.077 2009-Apr-17 00:11:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.968 1.104 1.111 2009-Apr-17 00:11:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.955 1.075 0.935 2009-Apr-17 00:11:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.106 1.027 0.130 2009-Apr-17 00:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.159 (still bad) 2009-Apr-17 00:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.220 (still bad) 2009-Apr-17 00:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.284 (still bad) 2009-Apr-17 00:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.343 (still bad) 2009-Apr-17 00:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.382 (still bad) 2009-Apr-17 00:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.394 (still bad) 2009-Apr-17 00:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.367 (still bad) 2009-Apr-17 00:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.317 (still bad) 2009-Apr-17 00:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.255 (still bad) 2009-Apr-17 00:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.189 (still bad) 2009-Apr-17 00:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 00:12:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:12:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.915 1.102 1.093 2009-Apr-17 00:12:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.959 1.101 1.110 2009-Apr-17 00:12:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.953 1.069 0.929 2009-Apr-17 00:12:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.106 1.093 0.131 2009-Apr-17 00:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.149 (still bad) 2009-Apr-17 00:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.218 (still bad) 2009-Apr-17 00:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.287 (still bad) 2009-Apr-17 00:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.340 (still bad) 2009-Apr-17 00:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.367 (still bad) 2009-Apr-17 00:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.356 (still bad) 2009-Apr-17 00:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.309 (still bad) 2009-Apr-17 00:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.240 (still bad) 2009-Apr-17 00:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.169 (still bad) 2009-Apr-17 00:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:13:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:13:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.910 1.073 1.071 2009-Apr-17 00:13:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.958 1.099 1.103 2009-Apr-17 00:13:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.950 1.070 0.931 2009-Apr-17 00:13:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.106 1.024 0.130 2009-Apr-17 00:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:14:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:14:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.913 1.073 1.069 2009-Apr-17 00:14:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.958 1.097 1.105 2009-Apr-17 00:14:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.950 1.067 0.929 2009-Apr-17 00:14:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.106 1.029 0.131 2009-Apr-17 00:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:15:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:15:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.915 1.074 1.073 2009-Apr-17 00:15:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.959 1.112 1.118 2009-Apr-17 00:15:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.949 1.065 0.930 2009-Apr-17 00:15:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.106 1.020 0.131 2009-Apr-17 00:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 00:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:17:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.917 1.073 1.071 2009-Apr-17 00:17:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.958 1.097 1.105 2009-Apr-17 00:17:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.950 1.076 0.938 2009-Apr-17 00:17:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.106 1.028 0.131 2009-Apr-17 00:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:18:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:18:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 0.913 1.074 1.073 2009-Apr-17 00:18:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.964 1.098 1.102 2009-Apr-17 00:18:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.947 1.068 0.934 2009-Apr-17 00:18:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.106 1.022 0.131 2009-Apr-17 00:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:19:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:19:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 0.909 1.072 1.073 2009-Apr-17 00:19:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.954 1.103 1.113 2009-Apr-17 00:19:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.947 1.070 0.937 2009-Apr-17 00:19:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.106 1.021 0.131 2009-Apr-17 00:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:20:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:20:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.910 1.072 1.072 2009-Apr-17 00:20:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.957 1.095 1.102 2009-Apr-17 00:20:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.951 1.070 0.933 2009-Apr-17 00:20:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.106 1.022 0.131 2009-Apr-17 00:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:20:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:20:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:20:08 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-17 00:20:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:20:08 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-17 00:20:08 LOG1 fixed_driftmap: New position: year = 2009.2929883134332 RA = 13:34:23.5 RA/Dec = 13:34:52.3 +22:12:50.3 2009-Apr-17 00:20:08 NOTE fixed_driftmap: Correcting ZA to 3:51:36.6 ... 2009-Apr-17 00:20:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8601671161 -CF 2009-Apr-17 00:20:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 00:20:08 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 00:20:08 LOG5 begin_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-17 00:20:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 00:20:08 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 00:20:08 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-17 00:20:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 00:20:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 00:20:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:20:08 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 00:20:08 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-17 00:20:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8601671161 -CF 2009-Apr-17 00:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:20:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 00:20:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:20:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:20:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 00:20:08 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-17 00:20:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 00:20:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:20:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 00:20:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:20:08 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:20:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:20:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:20:09 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:20:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 00:20:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:20:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:20:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:20:09 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:20:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:20:09 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:20:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:20:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 00:20:09 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 00:20:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 00:20:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 00:20:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:20:09 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:20:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 00:20:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:20:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:20:09 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 00:20:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:20:09 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 00:20:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:20:09 INFO2 take_data: Starting WAPP 1-second scan: 910700003 2009-Apr-17 00:20:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:20:09 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-17 00:20:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:20:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 00:20:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15610.00 2009-Apr-17 00:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:20:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:20:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:20:11 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-17 00:20:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:20:11 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-17 00:20:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 00:20:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 00:20:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 00:20:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:20:11 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-17 00:20:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:20:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 00:20:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:20:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:20:11 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-17 00:20:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 00:20:11 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 00:20:11 LOG5 finish_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-17 00:20:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 00:20:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:20:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 00:20:11 LOG5 end_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-17 00:20:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-17 00:20:11 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-17 00:20:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:20:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:20:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:20:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:20:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 00:20:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 00:20:12 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:20:12 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-17 00:20:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 00:20:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:20:12 INFO2 take_data: Starting WAPP 600-second scan: 910700004 2009-Apr-17 00:20:12 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:20:12 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-17 00:20:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:20:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.546 (still bad) 2009-Apr-17 00:20:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 00:20:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15613.00 2009-Apr-17 00:20:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0001.fits 2009-Apr-17 00:20:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0001.fits} 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.546 (still bad) 2009-Apr-17 00:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:21:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:21:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.915 1.080 1.079 2009-Apr-17 00:21:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.958 1.102 1.109 2009-Apr-17 00:21:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.972 1.072 0.932 2009-Apr-17 00:21:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.106 1.027 0.131 2009-Apr-17 00:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:22:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:22:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.917 1.092 1.090 2009-Apr-17 00:22:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.959 1.108 1.114 2009-Apr-17 00:22:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.952 1.072 0.934 2009-Apr-17 00:22:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.106 1.028 0.131 2009-Apr-17 00:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:23:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:23:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.918 1.078 1.078 2009-Apr-17 00:23:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.960 1.101 1.107 2009-Apr-17 00:23:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.953 1.076 0.933 2009-Apr-17 00:23:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.106 1.029 0.131 2009-Apr-17 00:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:24:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:24:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.911 1.075 1.073 2009-Apr-17 00:24:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.956 1.096 1.104 2009-Apr-17 00:24:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.959 1.071 0.932 2009-Apr-17 00:24:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.106 1.025 0.131 2009-Apr-17 00:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:25:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.915 1.093 1.090 2009-Apr-17 00:25:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.960 1.098 1.104 2009-Apr-17 00:25:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.951 1.068 0.928 2009-Apr-17 00:25:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.106 1.026 0.131 2009-Apr-17 00:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:26:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:26:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.914 1.073 1.077 2009-Apr-17 00:26:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.961 1.099 1.106 2009-Apr-17 00:26:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.948 1.069 0.930 2009-Apr-17 00:26:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.106 1.024 0.131 2009-Apr-17 00:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:27:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.916 1.074 1.074 2009-Apr-17 00:27:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.961 1.097 1.102 2009-Apr-17 00:27:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.950 1.069 0.929 2009-Apr-17 00:27:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.106 1.031 0.131 2009-Apr-17 00:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:28:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.911 1.078 1.078 2009-Apr-17 00:28:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.959 1.096 1.100 2009-Apr-17 00:28:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.951 1.069 0.931 2009-Apr-17 00:28:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.106 1.024 0.131 2009-Apr-17 00:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-17 00:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-17 00:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-17 00:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:29:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:29:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.915 1.073 1.075 2009-Apr-17 00:29:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.959 1.139 1.136 2009-Apr-17 00:29:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.952 1.070 0.930 2009-Apr-17 00:29:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.106 1.025 0.130 2009-Apr-17 00:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.154 (still bad) 2009-Apr-17 00:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.167 (still bad) 2009-Apr-17 00:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.169 (still bad) 2009-Apr-17 00:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.167 (still bad) 2009-Apr-17 00:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.161 (still bad) 2009-Apr-17 00:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.151 (still bad) 2009-Apr-17 00:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-17 00:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 00:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.148 (still bad) 2009-Apr-17 00:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.175 (still bad) 2009-Apr-17 00:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.195 (still bad) 2009-Apr-17 00:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.210 (still bad) 2009-Apr-17 00:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.217 (still bad) 2009-Apr-17 00:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.206 (still bad) 2009-Apr-17 00:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.191 (still bad) 2009-Apr-17 00:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.166 (still bad) 2009-Apr-17 00:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-17 00:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:30:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:30:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:30:13 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-17 00:30:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:30:13 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-17 00:30:13 LOG1 fixed_driftmap: New position: year = 2009.2930074847263 RA = 13:44:30.4 RA/Dec = 13:44:59.0 +22:12:53.3 2009-Apr-17 00:30:13 NOTE fixed_driftmap: Correcting ZA to 3:51:39.6 ... 2009-Apr-17 00:30:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8610052077 -CF 2009-Apr-17 00:30:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 00:30:13 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 00:30:13 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-17 00:30:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 00:30:13 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 00:30:13 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-17 00:30:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 00:30:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 00:30:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:30:13 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 00:30:13 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-17 00:30:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8610052077 -CF 2009-Apr-17 00:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:30:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 00:30:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:30:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:30:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 00:30:13 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-17 00:30:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 00:30:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:30:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 00:30:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:30:13 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-17 00:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:30:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:30:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:30:14 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-17 00:30:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:30:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 00:30:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:30:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:30:14 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:30:14 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-17 00:30:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:30:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:30:14 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-17 00:30:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:30:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:30:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 00:30:14 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-17 00:30:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 00:30:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 00:30:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 00:30:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:30:14 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-17 00:30:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:30:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 00:30:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:30:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:30:14 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-17 00:30:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 00:30:14 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:30:14 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-17 00:30:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 00:30:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:30:14 INFO2 take_data: Starting WAPP 1-second scan: 910700005 2009-Apr-17 00:30:15 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:30:15 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-17 00:30:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:30:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 00:30:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16216.00 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:30:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:30:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:30:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.915 1.077 1.079 2009-Apr-17 00:30:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.963 1.101 1.106 2009-Apr-17 00:30:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.551 1.343 1.115 0.962 2009-Apr-17 00:30:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.106 1.027 0.131 2009-Apr-17 00:30:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:30:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:30:17 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-17 00:30:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:30:17 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-17 00:30:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 00:30:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 00:30:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 00:30:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:30:17 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-17 00:30:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:30:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 00:30:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:30:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:30:17 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-17 00:30:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 00:30:17 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 00:30:17 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-17 00:30:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 00:30:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:30:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 00:30:17 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-17 00:30:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-17 00:30:17 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-17 00:30:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:30:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:30:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:30:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:30:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 00:30:18 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 00:30:18 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:30:18 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-17 00:30:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 00:30:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:30:18 INFO2 take_data: Starting WAPP 600-second scan: 910700006 2009-Apr-17 00:30:18 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:30:18 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-17 00:30:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:30:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:30:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 00:30:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16219.00 2009-Apr-17 00:30:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0002.fits 2009-Apr-17 00:30:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0002.fits} 2009-Apr-17 00:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.551 (still bad) 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:30:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:31:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:31:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.913 1.080 1.077 2009-Apr-17 00:31:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.961 1.108 1.111 2009-Apr-17 00:31:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.954 1.080 0.935 2009-Apr-17 00:31:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.106 1.030 0.131 2009-Apr-17 00:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:32:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.918 1.083 1.079 2009-Apr-17 00:32:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.964 1.102 1.107 2009-Apr-17 00:32:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.956 1.081 0.939 2009-Apr-17 00:32:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.106 1.034 0.131 2009-Apr-17 00:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-17 00:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-17 00:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-17 00:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:33:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.920 1.083 1.080 2009-Apr-17 00:33:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.966 1.104 1.106 2009-Apr-17 00:33:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.959 1.078 0.935 2009-Apr-17 00:33:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.106 1.031 0.131 2009-Apr-17 00:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-17 00:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:34:05 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:34:05.298 (seconds: 2045.298)!} 2009-Apr-17 00:34:05 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:34:05.298 (seconds: 2045.298)! 2009-Apr-17 00:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:34:06 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 2044.0 to 2045.0! 2009-Apr-17 00:34:07 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (2044.0 - 2046.0)! 2009-Apr-17 00:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:34:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:34:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.918 1.078 1.078 2009-Apr-17 00:34:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.967 1.113 1.115 2009-Apr-17 00:34:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.955 1.076 0.928 2009-Apr-17 00:34:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.106 1.027 0.131 2009-Apr-17 00:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 00:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.144 (still bad) 2009-Apr-17 00:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.150 (still bad) 2009-Apr-17 00:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Apr-17 00:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-17 00:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:35:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:35:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.917 1.083 1.080 2009-Apr-17 00:35:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.967 1.105 1.107 2009-Apr-17 00:35:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.956 1.091 0.946 2009-Apr-17 00:35:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.106 1.034 0.131 2009-Apr-17 00:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-17 00:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 00:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:36:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:36:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.920 1.087 1.080 2009-Apr-17 00:36:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.965 1.102 1.105 2009-Apr-17 00:36:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.956 1.105 0.961 2009-Apr-17 00:36:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.106 1.033 0.131 2009-Apr-17 00:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Apr-17 00:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-17 00:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-17 00:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:37:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:37:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.918 1.086 1.076 2009-Apr-17 00:37:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.962 1.106 1.102 2009-Apr-17 00:37:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.957 1.083 0.934 2009-Apr-17 00:37:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.106 1.038 0.131 2009-Apr-17 00:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-17 00:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-17 00:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-17 00:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:38:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:38:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.916 1.091 1.082 2009-Apr-17 00:38:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.961 1.107 1.103 2009-Apr-17 00:38:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.955 1.082 0.934 2009-Apr-17 00:38:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.106 1.036 0.131 2009-Apr-17 00:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-17 00:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:39:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:39:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.924 1.090 1.081 2009-Apr-17 00:39:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.964 1.128 1.121 2009-Apr-17 00:39:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.957 1.087 0.937 2009-Apr-17 00:39:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.106 1.040 0.131 2009-Apr-17 00:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 00:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:40:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:40:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:40:19 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-17 00:40:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:40:19 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-17 00:40:19 LOG1 fixed_driftmap: New position: year = 2009.2930266877077 RA = 13:54:38.2 RA/Dec = 13:55:06.6 +22:12:56.7 2009-Apr-17 00:40:19 NOTE fixed_driftmap: Correcting ZA to 3:51:43.0 ... 2009-Apr-17 00:40:19 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8619389938 -CF 2009-Apr-17 00:40:19 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 00:40:19 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 00:40:19 LOG5 begin_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-17 00:40:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 00:40:19 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 00:40:19 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-17 00:40:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 00:40:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 00:40:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:40:19 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 00:40:19 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-17 00:40:19 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8619389938 -CF 2009-Apr-17 00:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:40:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 00:40:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:40:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:40:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 00:40:19 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-17 00:40:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 00:40:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:40:19 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 00:40:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:40:19 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-17 00:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:40:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:40:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:40:20 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:40:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 00:40:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:40:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:40:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:40:20 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:40:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:40:20 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:40:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:40:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 00:40:20 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 00:40:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 00:40:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 00:40:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:40:20 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:40:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 00:40:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:40:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:40:20 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 00:40:20 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:40:20 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 00:40:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:40:20 INFO2 take_data: Starting WAPP 1-second scan: 910700007 2009-Apr-17 00:40:20 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:40:20 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-17 00:40:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:40:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 00:40:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16821.00 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:40:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:40:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:40:22 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-17 00:40:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:40:22 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-17 00:40:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 00:40:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 00:40:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 00:40:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:40:22 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-17 00:40:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:40:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 00:40:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:40:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:40:23 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-17 00:40:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 00:40:23 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 00:40:23 LOG5 finish_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-17 00:40:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 00:40:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:40:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 00:40:23 LOG5 end_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-17 00:40:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-17 00:40:23 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-17 00:40:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:40:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:40:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:40:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:40:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 00:40:23 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 00:40:23 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:40:23 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-17 00:40:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 00:40:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:40:23 INFO2 take_data: Starting WAPP 600-second scan: 910700008 2009-Apr-17 00:40:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:40:23 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-17 00:40:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.565 (still bad) 2009-Apr-17 00:40:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:40:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 00:40:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16824.00 2009-Apr-17 00:40:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0003.fits 2009-Apr-17 00:40:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0003.fits} 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.544 (still bad) 2009-Apr-17 00:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:40:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.927 1.095 1.088 2009-Apr-17 00:40:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.970 1.115 1.111 2009-Apr-17 00:40:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.962 1.091 0.943 2009-Apr-17 00:40:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.106 1.046 0.131 2009-Apr-17 00:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-17 00:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:41:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:41:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.927 1.096 1.089 2009-Apr-17 00:41:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.970 1.115 1.108 2009-Apr-17 00:41:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.962 1.092 0.942 2009-Apr-17 00:41:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.106 1.046 0.131 2009-Apr-17 00:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-17 00:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:42:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.924 1.098 1.090 2009-Apr-17 00:42:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.966 1.109 1.104 2009-Apr-17 00:42:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.958 1.086 0.939 2009-Apr-17 00:42:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.040 0.131 2009-Apr-17 00:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 00:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 00:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:43:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:43:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.922 1.091 1.080 2009-Apr-17 00:43:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.970 1.111 1.105 2009-Apr-17 00:43:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.962 1.090 0.943 2009-Apr-17 00:43:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.041 0.131 2009-Apr-17 00:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-17 00:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:44:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:44:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.937 1.092 1.080 2009-Apr-17 00:44:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.969 1.111 1.104 2009-Apr-17 00:44:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.958 1.087 0.941 2009-Apr-17 00:44:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.045 0.131 2009-Apr-17 00:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-17 00:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 00:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 00:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 00:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:45:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:45:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.921 1.091 1.081 2009-Apr-17 00:45:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.049 0.981 1.112 1.109 2009-Apr-17 00:45:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.969 1.085 0.942 2009-Apr-17 00:45:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.040 0.131 2009-Apr-17 00:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-17 00:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 00:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 00:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 00:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 00:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Apr-17 00:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.147 (still bad) 2009-Apr-17 00:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.150 (still bad) 2009-Apr-17 00:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.149 (still bad) 2009-Apr-17 00:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Apr-17 00:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-17 00:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 00:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 00:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:46:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:46:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.921 1.094 1.080 2009-Apr-17 00:46:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.970 1.114 1.111 2009-Apr-17 00:46:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.973 1.096 0.942 2009-Apr-17 00:46:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.106 1.057 0.131 2009-Apr-17 00:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 00:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 00:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.141 (still bad) 2009-Apr-17 00:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 00:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 00:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 00:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 00:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 00:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 00:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 00:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-17 00:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:47:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:47:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.920 1.096 1.082 2009-Apr-17 00:47:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.971 1.112 1.109 2009-Apr-17 00:47:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.965 1.094 0.940 2009-Apr-17 00:47:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.045 0.131 2009-Apr-17 00:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 00:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 00:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 00:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 00:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:48:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 0.930 1.091 1.085 2009-Apr-17 00:48:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.973 1.113 1.109 2009-Apr-17 00:48:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.965 1.088 0.938 2009-Apr-17 00:48:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.043 0.131 2009-Apr-17 00:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-17 00:49:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.922 1.092 1.085 2009-Apr-17 00:49:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.974 1.111 1.113 2009-Apr-17 00:49:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.965 1.089 0.939 2009-Apr-17 00:49:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.041 0.131 2009-Apr-17 00:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:50:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:50:24 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-17 00:50:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:50:24 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-17 00:50:24 LOG1 fixed_driftmap: New position: year = 2009.2930458590008 RA = 14:04:45.1 RA/Dec = 14:05:13.3 +22:13:00.4 2009-Apr-17 00:50:24 NOTE fixed_driftmap: Correcting ZA to 3:51:46.7 ... 2009-Apr-17 00:50:24 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8629635645 -CF 2009-Apr-17 00:50:24 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 00:50:24 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 00:50:24 LOG5 begin_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-17 00:50:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 00:50:24 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 00:50:24 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-17 00:50:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 00:50:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 00:50:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:50:24 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 00:50:24 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-17 00:50:24 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8629635645 -CF 2009-Apr-17 00:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:50:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 00:50:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 00:50:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:50:25 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 00:50:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 00:50:25 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 00:50:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:50:25 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 00:50:25 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:50:25 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 00:50:25 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:50:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:50:25 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:50:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 00:50:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 00:50:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:50:25 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 00:50:25 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 00:50:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 00:50:25 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 00:50:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 00:50:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 00:50:25 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 00:50:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 00:50:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 00:50:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:50:25 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:50:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 00:50:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:50:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:50:25 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 00:50:25 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:50:25 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 00:50:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:50:25 INFO2 take_data: Starting WAPP 1-second scan: 910700009 2009-Apr-17 00:50:25 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:50:25 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-17 00:50:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:50:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 00:50:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17426.00 2009-Apr-17 00:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:50:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 00:50:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 00:50:27 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-17 00:50:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 00:50:27 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-17 00:50:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 00:50:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 00:50:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 00:50:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 00:50:27 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-17 00:50:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 00:50:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 00:50:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 00:50:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 00:50:27 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-17 00:50:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 00:50:27 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 00:50:27 LOG5 finish_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-17 00:50:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 00:50:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 00:50:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 00:50:27 LOG5 end_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-17 00:50:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Apr-17 00:50:28 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Apr-17 00:50:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 00:50:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 00:50:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 00:50:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 00:50:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 00:50:28 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 00:50:28 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 00:50:28 LOG5 begin_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-17 00:50:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 00:50:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 00:50:28 INFO2 take_data: Starting WAPP 600-second scan: 910700010 2009-Apr-17 00:50:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 00:50:28 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-17 00:50:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 00:50:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 00:50:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 00:50:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17429.00 2009-Apr-17 00:50:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0004.fits 2009-Apr-17 00:50:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0004.fits} 2009-Apr-17 00:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.575 (still bad) 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 00:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:50:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-17 00:50:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 0.928 1.097 1.088 2009-Apr-17 00:50:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.977 1.119 1.113 2009-Apr-17 00:50:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.970 1.097 0.944 2009-Apr-17 00:50:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.107 1.046 0.131 2009-Apr-17 00:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 00:51:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:51:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.923 1.095 1.087 2009-Apr-17 00:51:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.971 1.111 1.111 2009-Apr-17 00:51:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.963 1.089 0.935 2009-Apr-17 00:51:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.106 1.039 0.131 2009-Apr-17 00:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:52:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.924 1.087 1.084 2009-Apr-17 00:52:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.973 1.111 1.112 2009-Apr-17 00:52:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.961 1.090 0.935 2009-Apr-17 00:52:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.041 0.131 2009-Apr-17 00:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:53:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.922 1.088 1.083 2009-Apr-17 00:53:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.970 1.112 1.113 2009-Apr-17 00:53:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.963 1.085 0.935 2009-Apr-17 00:53:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.106 1.035 0.131 2009-Apr-17 00:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 00:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-17 00:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-17 00:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 00:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 00:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-17 00:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:54:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:54:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.921 1.091 1.087 2009-Apr-17 00:54:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.976 1.113 1.108 2009-Apr-17 00:54:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.966 1.099 0.946 2009-Apr-17 00:54:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.106 1.041 0.131 2009-Apr-17 00:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 00:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:55:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:55:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.943 1.086 1.084 2009-Apr-17 00:55:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.973 1.110 1.111 2009-Apr-17 00:55:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.967 1.084 0.938 2009-Apr-17 00:55:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.106 1.039 0.131 2009-Apr-17 00:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 00:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 00:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 00:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 00:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 00:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 00:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 00:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 00:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-17 00:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 00:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 00:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 00:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-17 00:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-17 00:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 00:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-17 00:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:56:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-17 00:56:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.924 1.086 1.085 2009-Apr-17 00:56:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.979 1.110 1.113 2009-Apr-17 00:56:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.965 1.087 0.936 2009-Apr-17 00:56:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.107 1.038 0.131 2009-Apr-17 00:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 00:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-17 00:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 00:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 00:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 00:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-17 00:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 00:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 00:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 00:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 00:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 00:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-17 00:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-17 00:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 00:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-17 00:57:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-17 00:57:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.918 1.085 1.085 2009-Apr-17 00:57:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.976 1.110 1.110 2009-Apr-17 00:57:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.966 1.087 0.935 2009-Apr-17 00:57:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.107 1.040 0.131 2009-Apr-17 00:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 00:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 00:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-17 00:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 00:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 00:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 00:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 00:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 00:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 00:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 00:59:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 00:59:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.922 1.097 1.099 2009-Apr-17 00:59:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.977 1.110 1.110 2009-Apr-17 00:59:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.974 1.089 0.941 2009-Apr-17 00:59:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.041 0.131 2009-Apr-17 00:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 00:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 00:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 00:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 00:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 00:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 00:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 00:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 00:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 00:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 00:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 00:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:00:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:00:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.925 1.089 1.089 2009-Apr-17 01:00:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.976 1.110 1.112 2009-Apr-17 01:00:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.968 1.088 0.942 2009-Apr-17 01:00:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.042 0.131 2009-Apr-17 01:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 01:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:00:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:00:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:00:29 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-17 01:00:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:00:29 LOG5 end_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-17 01:00:29 LOG1 fixed_driftmap: New position: year = 2009.2930650302937 RA = 14:14:52.0 RA/Dec = 14:15:19.9 +22:13:04.4 2009-Apr-17 01:00:29 NOTE fixed_driftmap: Correcting ZA to 3:51:50.7 ... 2009-Apr-17 01:00:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8640783894 -CF 2009-Apr-17 01:00:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 01:00:29 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 01:00:29 LOG5 begin_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-17 01:00:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 01:00:29 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 01:00:29 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-17 01:00:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 01:00:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 01:00:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:00:29 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 01:00:29 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-17 01:00:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8640783894 -CF 2009-Apr-17 01:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:00:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 01:00:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:00:30 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 01:00:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 01:00:30 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 01:00:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:00:30 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 01:00:30 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:00:30 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:00:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:00:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:00:30 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:00:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 01:00:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:00:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:00:30 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:00:30 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:00:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:00:30 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:00:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:00:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 01:00:30 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 01:00:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 01:00:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 01:00:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:00:30 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:00:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 01:00:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:00:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:00:30 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 01:00:30 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:00:30 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 01:00:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:00:30 INFO2 take_data: Starting WAPP 1-second scan: 910700011 2009-Apr-17 01:00:30 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:00:30 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-17 01:00:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:00:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 01:00:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18031.00 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:00:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:00:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:00:32 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-17 01:00:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:00:32 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-17 01:00:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 01:00:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 01:00:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 01:00:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:00:32 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-17 01:00:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:00:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 01:00:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:00:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:00:32 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-17 01:00:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 01:00:32 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 01:00:32 LOG5 finish_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-17 01:00:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 01:00:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 01:00:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 01:00:32 LOG5 end_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-17 01:00:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2009-Apr-17 01:00:32 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2009-Apr-17 01:00:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 01:00:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 01:00:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 01:00:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 01:00:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 01:00:33 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 01:00:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:00:33 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-17 01:00:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 01:00:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:00:33 INFO2 take_data: Starting WAPP 600-second scan: 910700012 2009-Apr-17 01:00:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:00:33 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-17 01:00:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 01:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.569 (still bad) 2009-Apr-17 01:00:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:00:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 01:00:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18034.00 2009-Apr-17 01:00:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0005.fits 2009-Apr-17 01:00:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0005.fits} 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 01:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 01:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 01:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 01:01:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-17 01:01:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.926 1.087 1.086 2009-Apr-17 01:01:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.973 1.109 1.110 2009-Apr-17 01:01:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.968 1.084 0.938 2009-Apr-17 01:01:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.107 1.038 0.131 2009-Apr-17 01:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 01:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-17 01:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 01:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 01:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 01:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 01:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-17 01:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:02:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:02:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.926 1.090 1.089 2009-Apr-17 01:02:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.972 1.108 1.110 2009-Apr-17 01:02:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.967 1.087 0.936 2009-Apr-17 01:02:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.106 1.038 0.131 2009-Apr-17 01:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-17 01:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 01:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 01:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 01:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-17 01:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 01:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:03:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.927 1.091 1.087 2009-Apr-17 01:03:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.977 1.110 1.108 2009-Apr-17 01:03:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.969 1.088 0.941 2009-Apr-17 01:03:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.106 1.043 0.131 2009-Apr-17 01:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 01:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 01:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 01:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Apr-17 01:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-17 01:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:04:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.926 1.091 1.086 2009-Apr-17 01:04:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.971 1.112 1.108 2009-Apr-17 01:04:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.968 1.088 0.942 2009-Apr-17 01:04:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.045 0.131 2009-Apr-17 01:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:05:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.927 1.090 1.085 2009-Apr-17 01:05:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.972 1.112 1.109 2009-Apr-17 01:05:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.968 1.089 0.940 2009-Apr-17 01:05:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.041 0.131 2009-Apr-17 01:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:06:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:06:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.929 1.088 1.086 2009-Apr-17 01:06:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.971 1.114 1.109 2009-Apr-17 01:06:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.965 1.088 0.941 2009-Apr-17 01:06:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.106 1.038 0.131 2009-Apr-17 01:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-17 01:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-17 01:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-17 01:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:07:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:07:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.925 1.091 1.088 2009-Apr-17 01:07:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.973 1.131 1.129 2009-Apr-17 01:07:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.964 1.089 0.941 2009-Apr-17 01:07:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.045 0.131 2009-Apr-17 01:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Apr-17 01:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-17 01:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:08:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.926 1.091 1.087 2009-Apr-17 01:08:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.973 1.113 1.113 2009-Apr-17 01:08:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.965 1.093 0.944 2009-Apr-17 01:08:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.043 0.131 2009-Apr-17 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-17 01:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:09:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.928 1.091 1.088 2009-Apr-17 01:09:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.974 1.115 1.111 2009-Apr-17 01:09:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.968 1.091 0.944 2009-Apr-17 01:09:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.045 0.131 2009-Apr-17 01:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-17 01:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-17 01:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:10:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.927 1.093 1.085 2009-Apr-17 01:10:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.972 1.117 1.111 2009-Apr-17 01:10:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.966 1.093 0.943 2009-Apr-17 01:10:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.106 1.046 0.131 2009-Apr-17 01:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:10:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:10:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:10:34 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-17 01:10:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:10:34 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-17 01:10:34 LOG1 fixed_driftmap: New position: year = 2009.2930842015869 RA = 14:24:58.8 RA/Dec = 14:25:26.6 +22:13:08.7 2009-Apr-17 01:10:34 NOTE fixed_driftmap: Correcting ZA to 3:51:55.0 ... 2009-Apr-17 01:10:34 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8652813042 -CF 2009-Apr-17 01:10:34 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 01:10:34 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 01:10:34 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-17 01:10:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 01:10:34 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 01:10:34 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-17 01:10:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 01:10:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 01:10:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:10:34 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 01:10:34 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-17 01:10:34 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8652813042 -CF 2009-Apr-17 01:10:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:10:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 01:10:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:10:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:10:34 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 01:10:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 01:10:34 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-17 01:10:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 01:10:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:10:34 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 01:10:34 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:10:34 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-17 01:10:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:10:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:10:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:10:35 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:10:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 01:10:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:10:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:10:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:10:35 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:10:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:10:35 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:10:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:10:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 01:10:35 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 01:10:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 01:10:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 01:10:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:10:35 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:10:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 01:10:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:10:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:10:35 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 01:10:35 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:10:35 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 01:10:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:10:35 INFO2 take_data: Starting WAPP 1-second scan: 910700013 2009-Apr-17 01:10:35 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:10:35 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-17 01:10:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:10:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 01:10:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18636.00 2009-Apr-17 01:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:10:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:10:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:10:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:10:37 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-17 01:10:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:10:37 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-17 01:10:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 01:10:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 01:10:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 01:10:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:10:37 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-17 01:10:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:10:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 01:10:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:10:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:10:37 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-17 01:10:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 01:10:37 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 01:10:37 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-17 01:10:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 01:10:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 01:10:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 01:10:37 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-17 01:10:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2009-Apr-17 01:10:37 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2009-Apr-17 01:10:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 01:10:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 01:10:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 01:10:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 01:10:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 01:10:38 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 01:10:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:10:38 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-17 01:10:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 01:10:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:10:38 INFO2 take_data: Starting WAPP 600-second scan: 910700014 2009-Apr-17 01:10:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:10:38 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-17 01:10:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 01:10:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.580 (still bad) 2009-Apr-17 01:10:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 01:10:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18639.00 2009-Apr-17 01:10:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0006.fits 2009-Apr-17 01:10:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0006.fits} 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:11:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:11:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.927 1.092 1.084 2009-Apr-17 01:11:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.971 1.117 1.114 2009-Apr-17 01:11:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.967 1.094 0.940 2009-Apr-17 01:11:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.045 0.131 2009-Apr-17 01:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:12:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:12:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.924 1.091 1.084 2009-Apr-17 01:12:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.972 1.118 1.122 2009-Apr-17 01:12:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.967 1.089 0.943 2009-Apr-17 01:12:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.106 1.045 0.131 2009-Apr-17 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Apr-17 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:13:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:13:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.926 1.090 1.083 2009-Apr-17 01:13:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.971 1.116 1.124 2009-Apr-17 01:13:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.969 1.092 0.942 2009-Apr-17 01:13:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.044 0.131 2009-Apr-17 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:14:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.929 1.096 1.088 2009-Apr-17 01:14:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.972 1.117 1.122 2009-Apr-17 01:14:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.973 1.093 0.941 2009-Apr-17 01:14:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.048 0.131 2009-Apr-17 01:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:15:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:15:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.928 1.093 1.087 2009-Apr-17 01:15:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.972 1.114 1.118 2009-Apr-17 01:15:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.964 1.089 0.938 2009-Apr-17 01:15:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.043 0.131 2009-Apr-17 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-17 01:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-17 01:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:16:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.926 1.092 1.086 2009-Apr-17 01:16:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.972 1.115 1.114 2009-Apr-17 01:16:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.965 1.088 0.940 2009-Apr-17 01:16:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.106 1.043 0.131 2009-Apr-17 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:17:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:17:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.928 1.094 1.087 2009-Apr-17 01:17:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.972 1.114 1.110 2009-Apr-17 01:17:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.966 1.089 0.944 2009-Apr-17 01:17:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.045 0.131 2009-Apr-17 01:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-17 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-17 01:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.141 (still bad) 2009-Apr-17 01:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:18:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-17 01:18:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.930 1.125 1.112 2009-Apr-17 01:18:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.977 1.119 1.115 2009-Apr-17 01:18:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.973 1.097 0.948 2009-Apr-17 01:18:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.107 1.055 0.132 2009-Apr-17 01:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-17 01:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 01:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-17 01:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:19:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:19:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.921 1.093 1.083 2009-Apr-17 01:19:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.971 1.115 1.114 2009-Apr-17 01:19:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.965 1.089 0.944 2009-Apr-17 01:19:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.048 0.131 2009-Apr-17 01:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-17 01:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-17 01:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-17 01:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:20:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:20:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.925 1.093 1.082 2009-Apr-17 01:20:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.970 1.114 1.112 2009-Apr-17 01:20:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.968 1.094 0.942 2009-Apr-17 01:20:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.047 0.131 2009-Apr-17 01:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:20:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:20:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:20:39 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-17 01:20:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:20:39 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-17 01:20:39 LOG1 fixed_driftmap: New position: year = 2009.2931033728801 RA = 14:35:05.7 RA/Dec = 14:35:33.2 +22:13:13.4 2009-Apr-17 01:20:39 NOTE fixed_driftmap: Correcting ZA to 3:51:59.7 ... 2009-Apr-17 01:20:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8665699595 -CF 2009-Apr-17 01:20:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 01:20:39 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 01:20:39 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-17 01:20:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 01:20:39 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 01:20:39 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-17 01:20:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 01:20:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 01:20:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:20:39 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 01:20:39 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-17 01:20:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8665699595 -CF 2009-Apr-17 01:20:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:20:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 01:20:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:20:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:20:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 01:20:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 01:20:39 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-17 01:20:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 01:20:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:20:39 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 01:20:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:20:39 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:20:40 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:20:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:20:40 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:20:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 01:20:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:20:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:20:40 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:20:40 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:20:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:20:40 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:20:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:20:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 01:20:40 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 01:20:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 01:20:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 01:20:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:20:40 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:20:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 01:20:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:20:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:20:40 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 01:20:40 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:20:40 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 01:20:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:20:40 INFO2 take_data: Starting WAPP 1-second scan: 910700015 2009-Apr-17 01:20:40 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:20:40 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-17 01:20:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:20:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 01:20:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19241.00 2009-Apr-17 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:20:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:20:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:20:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:20:42 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-17 01:20:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:20:42 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-17 01:20:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 01:20:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 01:20:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 01:20:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:20:42 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-17 01:20:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:20:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 01:20:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:20:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:20:42 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-17 01:20:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 01:20:42 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 01:20:42 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-17 01:20:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 01:20:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 01:20:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 01:20:42 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-17 01:20:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2009-Apr-17 01:20:42 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2009-Apr-17 01:20:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 01:20:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 01:20:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 01:20:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 01:20:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 01:20:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 01:20:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:20:43 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-17 01:20:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 01:20:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:20:43 INFO2 take_data: Starting WAPP 600-second scan: 910700016 2009-Apr-17 01:20:43 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:20:43 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-17 01:20:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 01:20:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:20:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 01:20:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19244.00 2009-Apr-17 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.579 (still bad) 2009-Apr-17 01:20:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0007.fits 2009-Apr-17 01:20:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0007.fits} 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:21:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.922 1.094 1.083 2009-Apr-17 01:21:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.971 1.116 1.113 2009-Apr-17 01:21:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.968 1.093 0.942 2009-Apr-17 01:21:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.050 0.131 2009-Apr-17 01:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:22:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:22:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.924 1.095 1.082 2009-Apr-17 01:22:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.974 1.119 1.115 2009-Apr-17 01:22:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.971 1.097 0.941 2009-Apr-17 01:22:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.048 0.131 2009-Apr-17 01:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:23:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:23:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.925 1.094 1.082 2009-Apr-17 01:23:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.975 1.113 1.111 2009-Apr-17 01:23:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.971 1.095 0.940 2009-Apr-17 01:23:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.048 0.131 2009-Apr-17 01:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 01:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-17 01:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 01:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-17 01:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 01:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:24:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:24:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.926 1.092 1.083 2009-Apr-17 01:24:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.977 1.114 1.113 2009-Apr-17 01:24:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.970 1.090 0.943 2009-Apr-17 01:24:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.050 0.131 2009-Apr-17 01:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-17 01:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-17 01:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:25:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:25:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.922 1.092 1.085 2009-Apr-17 01:25:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.974 1.115 1.114 2009-Apr-17 01:25:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.971 1.092 0.940 2009-Apr-17 01:25:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.046 0.131 2009-Apr-17 01:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-17 01:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-17 01:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:26:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:26:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.924 1.094 1.084 2009-Apr-17 01:26:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.053 0.981 1.115 1.116 2009-Apr-17 01:26:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.971 1.092 0.942 2009-Apr-17 01:26:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.048 0.131 2009-Apr-17 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:27:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:27:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.924 1.095 1.086 2009-Apr-17 01:27:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.975 1.135 1.134 2009-Apr-17 01:27:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.973 1.104 0.952 2009-Apr-17 01:27:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.048 0.131 2009-Apr-17 01:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-17 01:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:28:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:28:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.926 1.096 1.084 2009-Apr-17 01:28:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.977 1.118 1.115 2009-Apr-17 01:28:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.975 1.105 0.950 2009-Apr-17 01:28:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.050 0.131 2009-Apr-17 01:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-17 01:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:29:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:29:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.929 1.099 1.090 2009-Apr-17 01:29:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.979 1.126 1.129 2009-Apr-17 01:29:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.973 1.094 0.946 2009-Apr-17 01:29:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.106 1.054 0.131 2009-Apr-17 01:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-17 01:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.141 (still bad) 2009-Apr-17 01:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.143 (still bad) 2009-Apr-17 01:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.142 (still bad) 2009-Apr-17 01:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Apr-17 01:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-17 01:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.147 (still bad) 2009-Apr-17 01:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.156 (still bad) 2009-Apr-17 01:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.163 (still bad) 2009-Apr-17 01:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.167 (still bad) 2009-Apr-17 01:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.167 (still bad) 2009-Apr-17 01:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.162 (still bad) 2009-Apr-17 01:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.156 (still bad) 2009-Apr-17 01:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Apr-17 01:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:30:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:30:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.928 1.097 1.089 2009-Apr-17 01:30:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.977 1.117 1.117 2009-Apr-17 01:30:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.974 1.098 0.949 2009-Apr-17 01:30:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.106 1.053 0.130 2009-Apr-17 01:30:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:30:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:30:44 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-17 01:30:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:30:44 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-17 01:30:44 LOG1 fixed_driftmap: New position: year = 2009.2931225441732 RA = 14:45:12.5 RA/Dec = 14:45:39.9 +22:13:18.3 2009-Apr-17 01:30:44 NOTE fixed_driftmap: Correcting ZA to 3:52:04.6 ... 2009-Apr-17 01:30:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8679418457 -CF 2009-Apr-17 01:30:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 01:30:44 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 01:30:44 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-17 01:30:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 01:30:44 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 01:30:44 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-17 01:30:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 01:30:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 01:30:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:30:44 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 01:30:44 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-17 01:30:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8679418457 -CF 2009-Apr-17 01:30:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:30:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 01:30:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:30:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:30:44 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 01:30:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 01:30:44 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-17 01:30:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 01:30:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:30:44 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 01:30:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:30:44 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-17 01:30:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:30:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:30:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:30:45 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:30:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 01:30:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:30:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:30:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:30:45 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:30:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:30:45 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:30:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:30:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 01:30:45 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 01:30:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 01:30:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 01:30:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:30:45 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:30:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 01:30:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:30:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:30:45 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 01:30:45 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:30:45 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 01:30:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:30:45 INFO2 take_data: Starting WAPP 1-second scan: 910700017 2009-Apr-17 01:30:45 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:30:45 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-17 01:30:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:30:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 01:30:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19846.00 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:30:47 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:30:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:30:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:30:47 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-17 01:30:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:30:47 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-17 01:30:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 01:30:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 01:30:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 01:30:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:30:47 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-17 01:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.584 (still bad) 2009-Apr-17 01:30:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:30:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 01:30:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:30:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:30:48 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-17 01:30:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 01:30:48 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 01:30:48 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-17 01:30:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 01:30:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 01:30:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 01:30:48 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-17 01:30:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2009-Apr-17 01:30:48 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2009-Apr-17 01:30:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 01:30:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 01:30:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 01:30:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 01:30:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 01:30:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 01:30:48 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:30:48 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-17 01:30:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 01:30:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:30:48 INFO2 take_data: Starting WAPP 600-second scan: 910700018 2009-Apr-17 01:30:48 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:30:48 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-17 01:30:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 01:30:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:30:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 01:30:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19849.00 2009-Apr-17 01:30:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0008.fits 2009-Apr-17 01:30:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0008.fits} 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:31:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:31:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.927 1.097 1.094 2009-Apr-17 01:31:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.981 1.117 1.116 2009-Apr-17 01:31:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.975 1.097 0.943 2009-Apr-17 01:31:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.049 0.131 2009-Apr-17 01:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 01:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 01:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-17 01:32:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:32:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.929 1.102 1.096 2009-Apr-17 01:32:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.980 1.125 1.124 2009-Apr-17 01:32:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.976 1.095 0.950 2009-Apr-17 01:32:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.047 0.130 2009-Apr-17 01:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Apr-17 01:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.141 (still bad) 2009-Apr-17 01:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-17 01:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-17 01:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-17 01:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.141 (still bad) 2009-Apr-17 01:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.147 (still bad) 2009-Apr-17 01:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.158 (still bad) 2009-Apr-17 01:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.157 (still bad) 2009-Apr-17 01:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.157 (still bad) 2009-Apr-17 01:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.157 (still bad) 2009-Apr-17 01:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.152 (still bad) 2009-Apr-17 01:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.148 (still bad) 2009-Apr-17 01:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.144 (still bad) 2009-Apr-17 01:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-17 01:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:33:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:33:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.927 1.096 1.091 2009-Apr-17 01:33:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.985 1.117 1.118 2009-Apr-17 01:33:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.131 0.978 1.096 0.946 2009-Apr-17 01:33:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.047 0.131 2009-Apr-17 01:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:34:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:34:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.934 1.115 1.117 2009-Apr-17 01:34:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.985 1.117 1.117 2009-Apr-17 01:34:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.979 1.098 0.945 2009-Apr-17 01:34:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.049 0.131 2009-Apr-17 01:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-17 01:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 01:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 01:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-17 01:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:35:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:35:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.930 1.097 1.091 2009-Apr-17 01:35:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.981 1.120 1.115 2009-Apr-17 01:35:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.131 0.978 1.093 0.945 2009-Apr-17 01:35:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.106 1.049 0.131 2009-Apr-17 01:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:36:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:36:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.927 1.096 1.091 2009-Apr-17 01:36:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.982 1.120 1.113 2009-Apr-17 01:36:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.980 1.097 0.942 2009-Apr-17 01:36:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.050 0.130 2009-Apr-17 01:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-17 01:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:37:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.928 1.096 1.089 2009-Apr-17 01:37:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.050 0.983 1.116 1.115 2009-Apr-17 01:37:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.976 1.093 0.942 2009-Apr-17 01:37:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.106 1.049 0.130 2009-Apr-17 01:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:38:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:38:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.936 1.112 1.100 2009-Apr-17 01:38:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.053 0.986 1.125 1.125 2009-Apr-17 01:38:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.134 0.983 1.119 0.970 2009-Apr-17 01:38:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.106 1.067 0.131 2009-Apr-17 01:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:39:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:39:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.935 1.106 1.096 2009-Apr-17 01:39:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 0.985 1.127 1.123 2009-Apr-17 01:39:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.136 0.979 1.107 0.952 2009-Apr-17 01:39:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.106 1.058 0.131 2009-Apr-17 01:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:40:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:40:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:40:49 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-17 01:40:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:40:49 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-17 01:40:49 LOG1 fixed_driftmap: New position: year = 2009.2931417154664 RA = 14:55:19.4 RA/Dec = 14:55:46.6 +22:13:23.5 2009-Apr-17 01:40:49 NOTE fixed_driftmap: Correcting ZA to 3:52:09.8 ... 2009-Apr-17 01:40:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8693942912 -CF 2009-Apr-17 01:40:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-17 01:40:49 START begin_task: Starting task 'WAPP calibration' 2009-Apr-17 01:40:49 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-17 01:40:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-17 01:40:49 START begin_task: Starting task 'selecting calibration type' 2009-Apr-17 01:40:49 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-17 01:40:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-17 01:40:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-17 01:40:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:40:49 START begin_task: Starting task 'waiting on setcal' 2009-Apr-17 01:40:49 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-17 01:40:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8693942912 -CF 2009-Apr-17 01:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:40:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-17 01:40:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-17 01:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:40:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-17 01:40:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-17 01:40:50 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-17 01:40:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:40:50 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-17 01:40:50 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:40:50 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-17 01:40:50 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:40:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:40:50 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:40:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-17 01:40:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-17 01:40:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:40:50 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-17 01:40:50 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:40:50 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-17 01:40:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-17 01:40:50 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-17 01:40:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-17 01:40:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-17 01:40:50 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-17 01:40:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-17 01:40:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-17 01:40:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:40:50 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:40:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-17 01:40:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:40:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:40:50 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-17 01:40:50 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:40:50 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-17 01:40:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:40:50 INFO2 take_data: Starting WAPP 1-second scan: 910700019 2009-Apr-17 01:40:50 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:40:50 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-17 01:40:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:40:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-17 01:40:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20451.00 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:40:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:40:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-17 01:40:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-17 01:40:52 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-17 01:40:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-17 01:40:52 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-17 01:40:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-17 01:40:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-17 01:40:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-17 01:40:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-17 01:40:52 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-17 01:40:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-17 01:40:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-17 01:40:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-17 01:40:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-17 01:40:52 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-17 01:40:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-17 01:40:52 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-17 01:40:52 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-17 01:40:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-17 01:40:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-17 01:40:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-17 01:40:52 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-17 01:40:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2009-Apr-17 01:40:52 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2009-Apr-17 01:40:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-17 01:40:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-17 01:40:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-17 01:40:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-17 01:40:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-17 01:40:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-17 01:40:53 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-17 01:40:53 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-17 01:40:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-17 01:40:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-17 01:40:53 INFO2 take_data: Starting WAPP 600-second scan: 910700020 2009-Apr-17 01:40:53 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-17 01:40:53 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-17 01:40:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-17 01:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.586 (still bad) 2009-Apr-17 01:40:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-17 01:40:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-17 01:40:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20454.00 2009-Apr-17 01:40:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20090417.a2010.0009.fits 2009-Apr-17 01:40:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090417.a2010.0009.fits} 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-17 01:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.586 (still bad) 2009-Apr-17 01:40:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-17 01:40:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:40:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.930 1.099 1.089 2009-Apr-17 01:40:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 0.979 1.122 1.115 2009-Apr-17 01:40:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.975 1.097 0.942 2009-Apr-17 01:40:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.106 1.057 0.131 2009-Apr-17 01:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:41:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:41:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.931 1.097 1.091 2009-Apr-17 01:41:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.050 0.983 1.122 1.119 2009-Apr-17 01:41:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.975 1.097 0.945 2009-Apr-17 01:41:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.106 1.059 0.131 2009-Apr-17 01:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-17 01:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:43:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.934 1.098 1.095 2009-Apr-17 01:43:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.049 0.981 1.121 1.117 2009-Apr-17 01:43:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.984 1.103 0.952 2009-Apr-17 01:43:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.106 1.061 0.131 2009-Apr-17 01:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-17 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:44:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.930 1.099 1.095 2009-Apr-17 01:44:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.982 1.123 1.116 2009-Apr-17 01:44:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.131 0.980 1.101 0.948 2009-Apr-17 01:44:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.106 1.060 0.131 2009-Apr-17 01:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:45:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.933 1.096 1.100 2009-Apr-17 01:45:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.986 1.121 1.126 2009-Apr-17 01:45:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.980 1.097 0.950 2009-Apr-17 01:45:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.106 1.057 0.131 2009-Apr-17 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-17 01:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:46:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:46:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.936 1.099 1.095 2009-Apr-17 01:46:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.054 0.986 1.119 1.124 2009-Apr-17 01:46:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.978 1.099 0.948 2009-Apr-17 01:46:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.106 1.060 0.131 2009-Apr-17 01:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 01:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-17 01:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-17 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-17 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-17 01:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Apr-17 01:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.142 (still bad) 2009-Apr-17 01:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-17 01:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:47:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:47:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.934 1.106 1.092 2009-Apr-17 01:47:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.052 0.979 1.120 1.123 2009-Apr-17 01:47:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.982 1.100 0.953 2009-Apr-17 01:47:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.106 1.112 0.131 2009-Apr-17 01:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-17 01:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-17 01:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-17 01:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-17 01:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-17 01:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-17 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-17 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-17 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-17 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-17 01:48:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-17 01:48:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.934 1.109 1.093 2009-Apr-17 01:48:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.053 0.980 1.123 1.119 2009-Apr-17 01:48:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.979 1.100 0.951 2009-Apr-17 01:48:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.107 1.069 0.131 2009-Apr-17 01:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-17 01:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-17 01:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-17 01:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-17 01:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-17 01:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-17 01:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-17 01:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-17 01:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-17 01:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-17 01:49:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-17 01:49:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.937 1.107 1.094 2009-Apr-17 01:49:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.052 0.986 1.126 1.119 2009-Apr-17 01:49:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.979 1.102 0.952 2009-Apr-17 01:49:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.106 1.069 0.131 2009-Apr-17 01:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-17 01:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-17 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-17 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-17 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-17 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-17 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-17 01:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-17 01:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-17 01:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-17 01:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-17 01:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-17 01:49:45 INFO5 check_wapp_levels: WAPP po