2009-Apr-16 19:38:02 BEGIN executive: CIMA executive starting ... 2009-Apr-16 19:38:02 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-16 19:38:02 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-16 19:38:02 INFO4 executive: This is an ON-LINE session 2009-Apr-16 19:38:02 INFO4 executive: This is a LOCAL session 2009-Apr-16 19:38:03 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-16 19:38:03 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2009-Apr-16 19:38:03 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090416' 2009-Apr-16 19:38:03 LOG2 log_preferences: Currently applied preferences: 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-16 19:38:03 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-16 19:38:03 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-16 19:38:03 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-16 19:38:03 ALERT executive: CIMA executive ready 2009-Apr-16 19:38:04 NOTE frontend: CIMA frontend ready 2009-Apr-16 19:38:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:06 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-16 19:38:09 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-16 19:38:09 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-16 19:38:09 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-16 19:38:09 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-16 19:38:09 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-16 19:38:09 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-16 19:38:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-16 19:38:09 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-16 19:38:09 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-16 19:38:09 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-16 19:38:09 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-16 19:38:09 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-16 19:38:09 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-16 19:38:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:38:09 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-16 19:38:09 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-16 19:38:12 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-16 19:38:12 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-16 19:38:12 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-16 19:38:12 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-16 19:38:12 LOG4 got_cormsg: From DATATAKING: 2009-Apr-16 19:38:12 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-16 19:38:13 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:17 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-16 19:38:17 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-16 19:38:17 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-16 19:38:17 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-16 19:38:17 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-16 19:38:17 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-16 19:38:17 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-16 19:38:17 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-16 19:38:17 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-16 19:38:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-16 19:38:20 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-16 19:38:20 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-16 19:38:20 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-16 19:38:20 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-16 19:38:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:30 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-16 19:38:33 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-16 19:38:33 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-16 19:38:33 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-16 19:38:33 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-16 19:38:33 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-16 19:38:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-16 19:38:33 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-16 19:38:33 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-16 19:38:33 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-16 19:38:33 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-16 19:38:33 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-16 19:38:33 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-16 19:38:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-16 19:38:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-16 19:38:35 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-16 19:38:35 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-16 19:38:35 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-16 19:38:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-16 19:38:36 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-16 19:38:36 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-16 19:38:36 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-16 19:38:36 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-16 19:38:36 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-16 19:38:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-16 19:38:36 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-16 19:38:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-16 19:38:36 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-16 19:38:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:38:36 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-16 19:38:36 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-16 19:38:36 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-16 19:38:36 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-16 19:38:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-16 19:38:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:38:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:38:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:38:36 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:38:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:38:36 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:38:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-16 19:38:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-16 19:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-16 19:38:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-16 19:38:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:38:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-16 19:38:36 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-16 19:38:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:38:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:38:52 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-16 19:38:52 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-16 19:38:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-16 19:38:52 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-16 19:38:52 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-16 19:38:52 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-16 19:38:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:38:53 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-16 19:38:53 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-16 19:38:53 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-16 19:38:53 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-16 19:38:53 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-16 19:38:53 START begin_task: Starting task 'selecting calibration port' 2009-Apr-16 19:38:53 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-16 19:38:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-16 19:38:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:38:53 START begin_task: Starting task 'waiting on calport' 2009-Apr-16 19:38:53 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:53 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-16 19:38:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:38:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:53 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:38:53 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-16 19:38:53 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-16 19:38:53 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-16 19:38:53 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 19:38:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 19:38:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:38:53 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:38:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:38:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:38:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:38:53 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:53 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-16 19:38:53 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-16 19:38:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:38:53 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:38:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:38:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:38:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:38:53 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-16 19:38:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 19:38:54 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-16 19:38:54 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-16 19:38:54 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-16 19:38:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:38:54 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-16 19:38:54 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-16 19:38:54 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-16 19:38:54 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-16 19:38:54 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-16 19:38:54 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-16 19:38:54 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-16 19:38:54 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-16 19:38:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-16 19:38:54 LOG3 track_source: Calling 'track_source galfasrc 085400.0 +221554 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-16 19:38:54 START begin_task: Starting task 'sending tracking commands' 2009-Apr-16 19:38:54 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-16 19:38:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-16 19:38:54 INFO1 track_source: Starting to track galfasrc 2009-Apr-16 19:38:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-16 19:38:54 LOG3 vw_send: To DATATAKING: set ra 085400.0 2009-Apr-16 19:38:54 LOG3 vw_send: To DATATAKING: set dec +221554 2009-Apr-16 19:38:54 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-16 19:38:54 LOG3 vw_send: To DATATAKING: pnt tr 085400.0 +221554 -CJ 2009-Apr-16 19:38:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-16 19:38:54 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-16 19:38:54 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-16 19:38:54 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-16 19:38:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:38:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-16 19:38:55 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-16 19:38:55 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-16 19:38:55 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-16 19:38:55 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-16 19:38:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:38:55 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-16 19:38:55 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-16 19:38:55 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-16 19:38:55 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-16 19:38:55 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-16 19:38:55 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-16 19:38:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-16 19:38:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-16 19:38:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-16 19:38:55 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-16 19:38:55 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-16 19:38:55 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-16 19:38:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 19:38:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20090416.a2010.0016.fits 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-16 19:38:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-16 19:38:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-16 19:38:55 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090416.a2010.0016.fits} 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: set ra 085400.0 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: set dec +221554 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: vw% 085400.0 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: vw% +221554 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: pnt tr 085400.0 +221554 -CJ 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-16 19:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:38:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 19:39:46 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-16 19:39:46 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-16 19:39:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-16 19:39:46 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-16 19:39:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-16 19:39:46 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-16 19:39:46 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-16 19:39:46 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-16 19:39:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:39:46 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-16 19:39:46 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-16 19:39:46 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-16 19:39:46 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-16 19:39:46 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-16 19:39:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-16 19:39:46 LOG3 waittrk: Start waittrk 5 2009-Apr-16 19:39:46 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-16 19:39:46 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-16 19:39:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-16 19:39:51 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-16 19:39:51 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-16 19:39:51 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-16 19:39:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-16 19:39:52 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-16 19:39:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-16 19:39:52 INFO2 waittrk: Now tracking galfasrc 2009-Apr-16 19:39:52 LOG4 waittrk: Current telescope position: Az = 182.25 ZA = 3.90 2009-Apr-16 19:39:52 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-16 19:39:52 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-16 19:39:52 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-16 19:39:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:39:52 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-16 19:39:52 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-16 19:39:52 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-16 19:39:52 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-16 19:39:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-16 19:39:52 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-16 19:39:52 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-16 19:39:52 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-16 19:39:52 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-16 19:39:52 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-16 19:39:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-16 19:39:52 START begin_task: Starting task 'selecting calibration type' 2009-Apr-16 19:39:52 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-16 19:39:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-16 19:39:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-16 19:39:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:39:52 START begin_task: Starting task 'waiting on setcal' 2009-Apr-16 19:39:52 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-16 19:39:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-16 19:39:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:39:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:39:53 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:39:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-16 19:39:53 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-16 19:39:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-16 19:39:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:39:53 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-16 19:39:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:39:53 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-16 19:39:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:39:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:39:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:39:54 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:39:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-16 19:39:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:39:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:39:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:39:54 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:39:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:39:54 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:39:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:39:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-16 19:39:54 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 19:39:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 19:39:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 19:39:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 19:39:54 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090416.a2010.0016.fits' is empty! 2009-Apr-16 19:39:54 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-16 19:39:54 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-16 19:39:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-16 19:39:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 19:39:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 19:39:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:39:54 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:39:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:39:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:39:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:39:54 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-16 19:39:54 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 19:39:54 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-16 19:39:54 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-16 19:39:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-16 19:39:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-16 19:39:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:39:54 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-16 19:39:54 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-16 19:39:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-16 19:39:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:39:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 19:39:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:39:57 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:39:57 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-16 19:39:57 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-16 19:39:58 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 19:39:58 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-16 19:39:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:39:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:39:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:39:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:39:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-16 19:39:58 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-16 19:39:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:39:58 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-16 19:39:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-16 19:39:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-16 19:39:58 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-16 19:39:58 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-16 19:39:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-16 19:39:58 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.043 1.069 ALFA beam 1: 1.017 0.997 2009-Apr-16 19:39:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.948 0.914 ALFA beam 3: 1.013 1.016 2009-Apr-16 19:39:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.008 1.079 ALFA beam 5: 1.004 1.080 2009-Apr-16 19:39:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.056 0.097 ALFA beam 7: 0.946 0.119 2009-Apr-16 19:39:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 19:39:58 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-16 19:39:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:39:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 19:39:58 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-16 19:39:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 19:39:58 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-16 19:39:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:39:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 19:39:58 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-16 19:39:58 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-16 19:39:58 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-16 19:39:58 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-16 19:39:58 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:39:58 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:39:58 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:39:58 LOG2 antvel: Parameters to Doppler: Topocentric 85198 2009 106 0.0 2009-Apr-16 19:39:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:39:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-16 19:39:58 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-16 19:39:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:39:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:39:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:39:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:39:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-16 19:39:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:39:59 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-16 19:39:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-16 19:39:59 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.898743 2009.2924556366772 18.999933 2009-Apr-16 19:39:59 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000048 22.265000000000008 2009-Apr-16 19:39:59 LOG4 log_alfabeam: ALFABEAM 1 8.900943112572923 22.159699102973960 2009-Apr-16 19:39:59 LOG4 log_alfabeam: ALFABEAM 2 8.906069204321899 22.226164195727250 2009-Apr-16 19:39:59 LOG4 log_alfabeam: ALFABEAM 3 8.905241830354589 22.331704866796382 2009-Apr-16 19:39:59 LOG4 log_alfabeam: ALFABEAM 4 8.898987513782270 22.370255946607926 2009-Apr-16 19:39:59 LOG4 log_alfabeam: ALFABEAM 5 8.893811131552866 22.301919314656388 2009-Apr-16 19:39:59 LOG4 log_alfabeam: ALFABEAM 6 8.894938819363224 22.196942694735423 2009-Apr-16 19:39:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600137 2009-Apr-16 19:39:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:39:59 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-16 19:39:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:39:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:39:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:39:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:39:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:39:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-16 19:39:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85200.00 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:40:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2009-Apr-16 19:40:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.092 1.051 1.019 2009-Apr-16 19:40:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.938 1.081 1.055 2009-Apr-16 19:40:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.008 1.079 1.004 1.080 2009-Apr-16 19:40:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.097 0.946 0.119 2009-Apr-16 19:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-16 19:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-16 19:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-16 19:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-16 19:40:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:40:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:40:10 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-16 19:40:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:40:10 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-16 19:40:10 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-16 19:40:10 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-16 19:40:10 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-16 19:40:10 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:40:10 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:40:10 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:40:10 LOG2 antvel: Parameters to Doppler: Topocentric 85210 2009 106 0.0 2009-Apr-16 19:40:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:40:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-16 19:40:10 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-16 19:40:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:40:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:40:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:40:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-16 19:40:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:40:10 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-16 19:40:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-16 19:40:10 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.902085 2009.2924560169342 18.999933 2009-Apr-16 19:40:10 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999849 22.265000000000001 2009-Apr-16 19:40:10 LOG4 log_alfabeam: ALFABEAM 1 8.901036067379888 22.159867713313400 2009-Apr-16 19:40:10 LOG4 log_alfabeam: ALFABEAM 2 8.906103077263220 22.227200882332077 2009-Apr-16 19:40:10 LOG4 log_alfabeam: ALFABEAM 3 8.905182475732879 22.332592725351951 2009-Apr-16 19:40:10 LOG4 log_alfabeam: ALFABEAM 4 8.898894439813541 22.370075486716189 2009-Apr-16 19:40:10 LOG4 log_alfabeam: ALFABEAM 5 8.893778947311283 22.300861675316391 2009-Apr-16 19:40:10 LOG4 log_alfabeam: ALFABEAM 6 8.894999396702039 22.196085231289508 2009-Apr-16 19:40:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600138 2009-Apr-16 19:40:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:40:11 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-16 19:40:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:40:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:40:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.142 (still bad) 2009-Apr-16 19:40:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-16 19:40:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85212.00 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.142 (still bad) 2009-Apr-16 19:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 19:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-16 19:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-16 19:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-16 19:40:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:40:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:40:22 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-16 19:40:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:40:22 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-16 19:40:22 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-16 19:40:22 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-16 19:40:22 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-16 19:40:22 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:40:22 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:40:22 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:40:22 LOG2 antvel: Parameters to Doppler: Topocentric 85222 2009 106 0.0 2009-Apr-16 19:40:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:40:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-16 19:40:22 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-16 19:40:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:40:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:40:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:40:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-16 19:40:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:40:22 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-16 19:40:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-16 19:40:22 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.905428 2009.2924563971912 18.999933 2009-Apr-16 19:40:22 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999860 22.264999999999990 2009-Apr-16 19:40:22 LOG4 log_alfabeam: ALFABEAM 1 8.901128954597940 22.160052324105216 2009-Apr-16 19:40:22 LOG4 log_alfabeam: ALFABEAM 2 8.906136069687237 22.228244333677839 2009-Apr-16 19:40:22 LOG4 log_alfabeam: ALFABEAM 3 8.905122272296007 22.333471287770248 2009-Apr-16 19:40:22 LOG4 log_alfabeam: ALFABEAM 4 8.898801454579299 22.369879001858092 2009-Apr-16 19:40:22 LOG4 log_alfabeam: ALFABEAM 5 8.893747682295880 22.299797815793944 2009-Apr-16 19:40:22 LOG4 log_alfabeam: ALFABEAM 6 8.895060768876986 22.195237494001642 2009-Apr-16 19:40:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600139 2009-Apr-16 19:40:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:40:23 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-16 19:40:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:40:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:40:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-16 19:40:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85224.00 2009-Apr-16 19:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:40:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-16 19:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-16 19:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-16 19:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 19:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-16 19:40:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:40:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:40:34 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-16 19:40:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:40:34 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-16 19:40:34 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-16 19:40:34 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-16 19:40:34 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-16 19:40:34 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:40:34 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:40:34 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:40:34 LOG2 antvel: Parameters to Doppler: Topocentric 85234 2009 106 0.0 2009-Apr-16 19:40:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:40:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-16 19:40:34 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-16 19:40:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:40:34 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:40:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:40:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-16 19:40:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:40:34 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-16 19:40:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-16 19:40:34 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.908770 2009.2924567774483 18.999933 2009-Apr-16 19:40:34 LOG4 log_alfabeam: ALFABEAM 0 8.899999999972032 22.264999999999723 2009-Apr-16 19:40:34 LOG4 log_alfabeam: ALFABEAM 1 8.901221677514311 22.160252767644568 2009-Apr-16 19:40:34 LOG4 log_alfabeam: ALFABEAM 2 8.906168145687232 22.229293478095940 2009-Apr-16 19:40:34 LOG4 log_alfabeam: ALFABEAM 3 8.905061281231196 22.334339620739122 2009-Apr-16 19:40:34 LOG4 log_alfabeam: ALFABEAM 4 8.898708654933909 22.369666677313948 2009-Apr-16 19:40:34 LOG4 log_alfabeam: ALFABEAM 5 8.893717369868154 22.298728838768199 2009-Apr-16 19:40:34 LOG4 log_alfabeam: ALFABEAM 6 8.895122872851896 22.194400371061310 2009-Apr-16 19:40:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600140 2009-Apr-16 19:40:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:40:35 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-16 19:40:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:40:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:40:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-16 19:40:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85236.00 2009-Apr-16 19:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:40:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 19:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 19:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 19:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 19:40:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 19:40:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:40:46 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-16 19:40:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:40:46 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-16 19:40:46 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-16 19:40:46 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-16 19:40:46 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-16 19:40:46 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:40:46 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:40:46 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:40:46 LOG2 antvel: Parameters to Doppler: Topocentric 85246 2009 106 0.0 2009-Apr-16 19:40:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:40:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-16 19:40:46 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-16 19:40:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:40:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:40:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:40:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-16 19:40:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:40:46 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-16 19:40:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-16 19:40:46 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.912113 2009.2924571577053 18.999933 2009-Apr-16 19:40:46 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000233 22.265000000000001 2009-Apr-16 19:40:46 LOG4 log_alfabeam: ALFABEAM 1 8.901314250669765 22.160469085686056 2009-Apr-16 19:40:46 LOG4 log_alfabeam: ALFABEAM 2 8.906199309519547 22.230348487401095 2009-Apr-16 19:40:46 LOG4 log_alfabeam: ALFABEAM 3 8.904999492385176 22.335197848633236 2009-Apr-16 19:40:46 LOG4 log_alfabeam: ALFABEAM 4 8.898616026475473 22.369438474727932 2009-Apr-16 19:40:46 LOG4 log_alfabeam: ALFABEAM 5 8.893688005388309 22.297654578383455 2009-Apr-16 19:40:46 LOG4 log_alfabeam: ALFABEAM 6 8.895185718546275 22.193573729350934 2009-Apr-16 19:40:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600141 2009-Apr-16 19:40:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:40:47 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-16 19:40:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:40:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:40:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-16 19:40:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85248.00 2009-Apr-16 19:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:40:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:40:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:40:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:40:58 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-16 19:40:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:40:58 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-16 19:40:58 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-16 19:40:58 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-16 19:40:58 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-16 19:40:58 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:40:58 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:40:58 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:40:58 LOG2 antvel: Parameters to Doppler: Topocentric 85258 2009 106 0.0 2009-Apr-16 19:40:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:40:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-16 19:40:58 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-16 19:40:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:40:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:40:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:40:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-16 19:40:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:40:58 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-16 19:40:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-16 19:40:58 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.915455 2009.2924575379625 18.999933 2009-Apr-16 19:40:58 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000151 22.264999999999990 2009-Apr-16 19:40:58 LOG4 log_alfabeam: ALFABEAM 1 8.901406577860655 22.160701049896602 2009-Apr-16 19:40:58 LOG4 log_alfabeam: ALFABEAM 2 8.906229528712990 22.231408267157725 2009-Apr-16 19:40:58 LOG4 log_alfabeam: ALFABEAM 3 8.904936969989780 22.336045076407768 2009-Apr-16 19:40:58 LOG4 log_alfabeam: ALFABEAM 4 8.898523665371025 22.369194640046079 2009-Apr-16 19:40:58 LOG4 log_alfabeam: ALFABEAM 5 8.893659618549613 22.296576157375359 2009-Apr-16 19:40:58 LOG4 log_alfabeam: ALFABEAM 6 8.895249240075966 22.192758416958949 2009-Apr-16 19:40:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600142 2009-Apr-16 19:40:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:40:59 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-16 19:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 19:40:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:40:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:40:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:40:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-16 19:40:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85260.00 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2009-Apr-16 19:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:41:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:41:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.058 1.010 0.998 2009-Apr-16 19:41:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.910 1.018 1.028 2009-Apr-16 19:41:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.093 0.991 1.090 2009-Apr-16 19:41:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.099 0.954 0.122 2009-Apr-16 19:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:41:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:41:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:41:10 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-16 19:41:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:41:10 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-16 19:41:10 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-16 19:41:10 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-16 19:41:10 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-16 19:41:10 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:41:10 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:41:10 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:41:10 LOG2 antvel: Parameters to Doppler: Topocentric 85270 2009 106 0.0 2009-Apr-16 19:41:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:41:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-16 19:41:10 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-16 19:41:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:41:10 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:41:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:41:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-16 19:41:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:41:10 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-16 19:41:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-16 19:41:10 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.918797 2009.2924579182195 18.999933 2009-Apr-16 19:41:10 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000214 22.265000000000008 2009-Apr-16 19:41:10 LOG4 log_alfabeam: ALFABEAM 1 8.901498646394529 22.160948603205011 2009-Apr-16 19:41:10 LOG4 log_alfabeam: ALFABEAM 2 8.906258800169567 22.232472662564003 2009-Apr-16 19:41:10 LOG4 log_alfabeam: ALFABEAM 3 8.904873723982325 22.336881195166967 2009-Apr-16 19:41:10 LOG4 log_alfabeam: ALFABEAM 4 8.898431584339972 22.368935237255879 2009-Apr-16 19:41:10 LOG4 log_alfabeam: ALFABEAM 5 8.893632211333879 22.295493740394917 2009-Apr-16 19:41:10 LOG4 log_alfabeam: ALFABEAM 6 8.895313427055408 22.191954523558291 2009-Apr-16 19:41:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600143 2009-Apr-16 19:41:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:41:11 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-16 19:41:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:41:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:41:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 19:41:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-16 19:41:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85272.00 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:41:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:41:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:41:22 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-16 19:41:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:41:22 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-16 19:41:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-16 19:41:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-16 19:41:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-16 19:41:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:41:22 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-16 19:41:22 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:41:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-16 19:41:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:41:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:41:22 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-16 19:41:22 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-16 19:41:22 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-16 19:41:22 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-16 19:41:22 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:41:22 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:41:22 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:41:22 LOG2 antvel: Parameters to Doppler: Topocentric 85282 2009 106 0.0 2009-Apr-16 19:41:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:41:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-16 19:41:22 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-16 19:41:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:41:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:41:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:41:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-16 19:41:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:41:22 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-16 19:41:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-16 19:41:22 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.922140 2009.2924582984765 18.999933 2009-Apr-16 19:41:22 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999975 22.265000000000001 2009-Apr-16 19:41:22 LOG4 log_alfabeam: ALFABEAM 1 8.901590443648621 22.161211686970773 2009-Apr-16 19:41:22 LOG4 log_alfabeam: ALFABEAM 2 8.906287120946498 22.233541518974867 2009-Apr-16 19:41:22 LOG4 log_alfabeam: ALFABEAM 3 8.904809764328942 22.337706097852347 2009-Apr-16 19:41:22 LOG4 log_alfabeam: ALFABEAM 4 8.898339795974016 22.368660331877923 2009-Apr-16 19:41:22 LOG4 log_alfabeam: ALFABEAM 5 8.893605785564251 22.294407491549979 2009-Apr-16 19:41:22 LOG4 log_alfabeam: ALFABEAM 6 8.895378269066788 22.191162136874492 2009-Apr-16 19:41:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600144 2009-Apr-16 19:41:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:41:23 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-16 19:41:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:41:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:41:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-16 19:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2009-Apr-16 19:41:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85284.00 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:41:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.568 (still bad) 2009-Apr-16 19:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Apr-16 19:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Apr-16 19:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Apr-16 19:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Apr-16 19:41:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:41:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:41:34 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-16 19:41:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:41:34 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-16 19:41:34 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-16 19:41:34 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-16 19:41:34 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-16 19:41:34 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:41:34 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:41:34 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:41:34 LOG2 antvel: Parameters to Doppler: Topocentric 85294 2009 106 0.0 2009-Apr-16 19:41:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:41:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-16 19:41:34 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-16 19:41:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:41:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:41:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:41:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-16 19:41:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:41:34 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-16 19:41:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-16 19:41:34 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.925482 2009.2924586787335 18.999933 2009-Apr-16 19:41:34 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000112 22.264999999999997 2009-Apr-16 19:41:34 LOG4 log_alfabeam: ALFABEAM 1 8.901681875153713 22.161489984283083 2009-Apr-16 19:41:34 LOG4 log_alfabeam: ALFABEAM 2 8.906314464073033 22.234613717550911 2009-Apr-16 19:41:34 LOG4 log_alfabeam: ALFABEAM 3 8.904745159347826 22.338518954656482 2009-Apr-16 19:41:34 LOG4 log_alfabeam: ALFABEAM 4 8.898248394667050 22.368370258217205 2009-Apr-16 19:41:34 LOG4 log_alfabeam: ALFABEAM 5 8.893580365309832 22.293318553491222 2009-Apr-16 19:41:34 LOG4 log_alfabeam: ALFABEAM 6 8.895443696666501 22.190382037761964 2009-Apr-16 19:41:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600145 2009-Apr-16 19:41:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:41:35 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-16 19:41:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:41:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:41:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-16 19:41:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85296.00 2009-Apr-16 19:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.571 (still bad) 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:41:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-16 19:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2009-Apr-16 19:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Apr-16 19:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2009-Apr-16 19:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-16 19:41:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:41:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:41:46 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-16 19:41:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:41:46 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-16 19:41:46 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-16 19:41:46 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-16 19:41:46 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-16 19:41:46 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:41:46 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:41:46 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:41:46 LOG2 antvel: Parameters to Doppler: Topocentric 85306 2009 106 0.0 2009-Apr-16 19:41:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:41:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-16 19:41:46 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-16 19:41:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:41:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:41:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:41:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-16 19:41:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:41:46 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-16 19:41:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-16 19:41:46 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.928825 2009.2924590589907 18.999933 2009-Apr-16 19:41:46 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000047 22.265000000000015 2009-Apr-16 19:41:46 LOG4 log_alfabeam: ALFABEAM 1 8.901772956635831 22.161783482697423 2009-Apr-16 19:41:46 LOG4 log_alfabeam: ALFABEAM 2 8.906340837182524 22.235689417128018 2009-Apr-16 19:41:46 LOG4 log_alfabeam: ALFABEAM 3 8.904679901215909 22.339319932131904 2009-Apr-16 19:41:46 LOG4 log_alfabeam: ALFABEAM 4 8.898157364602932 22.368065031875815 2009-Apr-16 19:41:46 LOG4 log_alfabeam: ALFABEAM 5 8.893555942283367 22.292226769576416 2009-Apr-16 19:41:46 LOG4 log_alfabeam: ALFABEAM 6 8.895509717677189 22.189614049454779 2009-Apr-16 19:41:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600146 2009-Apr-16 19:41:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:41:47 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-16 19:41:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:41:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:41:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-16 19:41:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85308.00 2009-Apr-16 19:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.568 (still bad) 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-16 19:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-16 19:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-16 19:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-16 19:41:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.563 (still bad) 2009-Apr-16 19:41:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:41:58 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-16 19:41:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:41:58 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-16 19:41:58 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-16 19:41:58 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-16 19:41:58 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-16 19:41:58 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:41:58 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:41:58 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:41:58 LOG2 antvel: Parameters to Doppler: Topocentric 85318 2009 106 0.0 2009-Apr-16 19:41:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:41:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-16 19:41:58 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-16 19:41:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:41:58 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:41:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:41:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-16 19:41:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:41:58 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-16 19:41:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-16 19:41:58 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.932167 2009.2924594392478 18.999933 2009-Apr-16 19:41:58 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000196 22.265000000000008 2009-Apr-16 19:41:58 LOG4 log_alfabeam: ALFABEAM 1 8.901863595285917 22.162091808818452 2009-Apr-16 19:41:58 LOG4 log_alfabeam: ALFABEAM 2 8.906366217075867 22.236767489364443 2009-Apr-16 19:41:58 LOG4 log_alfabeam: ALFABEAM 3 8.904614060504050 22.340108248446960 2009-Apr-16 19:41:58 LOG4 log_alfabeam: ALFABEAM 4 8.898066798414414 22.367745043316411 2009-Apr-16 19:41:58 LOG4 log_alfabeam: ALFABEAM 5 8.893532536677860 22.291133288748618 2009-Apr-16 19:41:58 LOG4 log_alfabeam: ALFABEAM 6 8.895576260687355 22.188858904026770 2009-Apr-16 19:41:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600147 2009-Apr-16 19:41:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:41:59 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-16 19:41:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:41:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:41:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:41:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-16 19:41:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85320.00 2009-Apr-16 19:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.567 (still bad) 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:42:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.549 (still bad) 2009-Apr-16 19:42:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 19:42:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.465 1.463 1.414 1.376 2009-Apr-16 19:42:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.335 1.281 1.454 1.440 2009-Apr-16 19:42:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.462 1.550 1.433 1.482 2009-Apr-16 19:42:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.542 0.100 1.370 0.123 2009-Apr-16 19:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.553 (still bad) 2009-Apr-16 19:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2009-Apr-16 19:42:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:42:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:42:10 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-16 19:42:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:42:10 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-16 19:42:10 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-16 19:42:10 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-16 19:42:10 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-16 19:42:10 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:42:10 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:42:10 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:42:10 LOG2 antvel: Parameters to Doppler: Topocentric 85330 2009 106 0.0 2009-Apr-16 19:42:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:42:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-16 19:42:10 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-16 19:42:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:42:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:42:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:42:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-16 19:42:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:42:10 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-16 19:42:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-16 19:42:10 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.935510 2009.2924598195048 18.999933 2009-Apr-16 19:42:10 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999986 22.264999999999997 2009-Apr-16 19:42:10 LOG4 log_alfabeam: ALFABEAM 1 8.901953807750083 22.162414930963124 2009-Apr-16 19:42:10 LOG4 log_alfabeam: ALFABEAM 2 8.906390612829981 22.237848093355968 2009-Apr-16 19:42:10 LOG4 log_alfabeam: ALFABEAM 3 8.904547629980485 22.340884090291350 2009-Apr-16 19:42:10 LOG4 log_alfabeam: ALFABEAM 4 8.897976679317932 22.367410327119416 2009-Apr-16 19:42:10 LOG4 log_alfabeam: ALFABEAM 5 8.893510138727191 22.290037952423493 2009-Apr-16 19:42:10 LOG4 log_alfabeam: ALFABEAM 6 8.895643333073320 22.188116404478375 2009-Apr-16 19:42:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600148 2009-Apr-16 19:42:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:42:11 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-16 19:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2009-Apr-16 19:42:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:42:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:42:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-16 19:42:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85332.00 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2009-Apr-16 19:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.540 (still bad) 2009-Apr-16 19:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.543 (still bad) 2009-Apr-16 19:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2009-Apr-16 19:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.539 (still bad) 2009-Apr-16 19:42:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:42:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:42:22 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-16 19:42:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:42:22 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-16 19:42:22 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-16 19:42:22 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-16 19:42:22 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-16 19:42:22 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:42:22 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:42:22 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:42:22 LOG2 antvel: Parameters to Doppler: Topocentric 85342 2009 106 0.0 2009-Apr-16 19:42:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:42:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-16 19:42:22 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-16 19:42:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:42:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:42:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:42:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-16 19:42:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:42:22 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-16 19:42:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-16 19:42:22 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.938852 2009.2924601997618 18.999933 2009-Apr-16 19:42:22 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000036 22.264999999999990 2009-Apr-16 19:42:22 LOG4 log_alfabeam: ALFABEAM 1 8.902043503288743 22.162752422039759 2009-Apr-16 19:42:22 LOG4 log_alfabeam: ALFABEAM 2 8.906414005054311 22.238930096723060 2009-Apr-16 19:42:22 LOG4 log_alfabeam: ALFABEAM 3 8.904480682097166 22.341646726692804 2009-Apr-16 19:42:22 LOG4 log_alfabeam: ALFABEAM 4 8.897887097782307 22.367061326980600 2009-Apr-16 19:42:22 LOG4 log_alfabeam: ALFABEAM 5 8.893488764732062 22.288941910256639 2009-Apr-16 19:42:22 LOG4 log_alfabeam: ALFABEAM 6 8.895710861831587 22.187387231647545 2009-Apr-16 19:42:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600149 2009-Apr-16 19:42:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:42:23 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-16 19:42:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:42:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:42:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.547 (still bad) 2009-Apr-16 19:42:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-16 19:42:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85344.00 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.547 (still bad) 2009-Apr-16 19:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.539 (still bad) 2009-Apr-16 19:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.546 (still bad) 2009-Apr-16 19:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.539 (still bad) 2009-Apr-16 19:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.540 (still bad) 2009-Apr-16 19:42:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:42:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:42:34 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-16 19:42:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:42:34 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-16 19:42:34 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-16 19:42:34 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-16 19:42:34 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-16 19:42:34 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:42:34 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:42:34 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:42:34 LOG2 antvel: Parameters to Doppler: Topocentric 85354 2009 106 0.0 2009-Apr-16 19:42:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:42:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-16 19:42:34 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-16 19:42:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:42:34 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:42:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:42:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-16 19:42:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:42:34 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-16 19:42:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-16 19:42:34 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.942195 2009.2924605800188 18.999933 2009-Apr-16 19:42:34 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000034 22.264999999999997 2009-Apr-16 19:42:34 LOG4 log_alfabeam: ALFABEAM 1 8.902132699680267 22.163104233170561 2009-Apr-16 19:42:34 LOG4 log_alfabeam: ALFABEAM 2 8.906436404261768 22.240013661945831 2009-Apr-16 19:42:34 LOG4 log_alfabeam: ALFABEAM 3 8.904413209985348 22.342396365682667 2009-Apr-16 19:42:34 LOG4 log_alfabeam: ALFABEAM 4 8.897798035847137 22.366698094330527 2009-Apr-16 19:42:34 LOG4 log_alfabeam: ALFABEAM 5 8.893468403472484 22.287844998554153 2009-Apr-16 19:42:34 LOG4 log_alfabeam: ALFABEAM 6 8.895778854118184 22.186671167379835 2009-Apr-16 19:42:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600150 2009-Apr-16 19:42:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:42:35 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-16 19:42:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:42:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:42:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-16 19:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.546 (still bad) 2009-Apr-16 19:42:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85356.00 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2009-Apr-16 19:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.535 (still bad) 2009-Apr-16 19:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2009-Apr-16 19:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2009-Apr-16 19:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.541 (still bad) 2009-Apr-16 19:42:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:42:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:42:46 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-16 19:42:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:42:46 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-16 19:42:46 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-16 19:42:46 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-16 19:42:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-16 19:42:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 19:42:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 19:42:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:42:46 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-16 19:42:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:42:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:42:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:42:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:42:46 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-16 19:42:46 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-16 19:42:46 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-16 19:42:46 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-16 19:42:46 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-16 19:42:46 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:42:46 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:42:46 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:42:46 LOG2 antvel: Parameters to Doppler: Topocentric 85366 2009 106 0.0 2009-Apr-16 19:42:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:42:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-16 19:42:46 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-16 19:42:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:42:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:42:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:42:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-16 19:42:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:42:46 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-16 19:42:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-16 19:42:46 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.945537 2009.292460960276 18.999933 2009-Apr-16 19:42:46 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000047 22.264999999999997 2009-Apr-16 19:42:46 LOG4 log_alfabeam: ALFABEAM 1 8.902221308629118 22.163469886914648 2009-Apr-16 19:42:46 LOG4 log_alfabeam: ALFABEAM 2 8.906457794870079 22.241097658013349 2009-Apr-16 19:42:46 LOG4 log_alfabeam: ALFABEAM 3 8.904345287589404 22.343132329391842 2009-Apr-16 19:42:46 LOG4 log_alfabeam: ALFABEAM 4 8.897709581445087 22.366321122624377 2009-Apr-16 19:42:46 LOG4 log_alfabeam: ALFABEAM 5 8.893449067383679 22.286748362213974 2009-Apr-16 19:42:46 LOG4 log_alfabeam: ALFABEAM 6 8.895847235723405 22.185968839456919 2009-Apr-16 19:42:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600151 2009-Apr-16 19:42:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:42:47 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-16 19:42:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:42:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:42:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-16 19:42:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85368.00 2009-Apr-16 19:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.544 (still bad) 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:42:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-16 19:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.136 (still bad) 2009-Apr-16 19:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-16 19:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-16 19:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.139 (still bad) 2009-Apr-16 19:42:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:42:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:42:58 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-16 19:42:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:42:58 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-16 19:42:58 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-16 19:42:58 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-16 19:42:58 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-16 19:42:58 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:42:58 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:42:58 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:42:58 LOG2 antvel: Parameters to Doppler: Topocentric 85378 2009 106 0.0 2009-Apr-16 19:42:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:42:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-16 19:42:58 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-16 19:42:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:42:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:42:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:42:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-16 19:42:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:42:58 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-16 19:42:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-16 19:42:58 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.948880 2009.292461340533 18.999933 2009-Apr-16 19:42:58 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000187 22.265000000000004 2009-Apr-16 19:42:58 LOG4 log_alfabeam: ALFABEAM 1 8.902309349232794 22.163849319599628 2009-Apr-16 19:42:58 LOG4 log_alfabeam: ALFABEAM 2 8.906478188790194 22.242182253812690 2009-Apr-16 19:42:58 LOG4 log_alfabeam: ALFABEAM 3 8.904276908170072 22.343854847920369 2009-Apr-16 19:42:58 LOG4 log_alfabeam: ALFABEAM 4 8.897621715257211 22.365930477667550 2009-Apr-16 19:42:58 LOG4 log_alfabeam: ALFABEAM 5 8.893430743849123 22.285651829406298 2009-Apr-16 19:42:58 LOG4 log_alfabeam: ALFABEAM 6 8.895916013811981 22.185280008116088 2009-Apr-16 19:42:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600152 2009-Apr-16 19:42:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:42:59 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-16 19:42:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:42:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:42:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:42:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:42:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-16 19:42:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85380.00 2009-Apr-16 19:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.139 (still bad) 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:43:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-16 19:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-16 19:43:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 19:43:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.076 1.035 1.011 2009-Apr-16 19:43:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.921 1.059 1.048 2009-Apr-16 19:43:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.109 1.040 1.117 2009-Apr-16 19:43:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.100 0.964 0.123 2009-Apr-16 19:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-16 19:43:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:43:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:43:10 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-16 19:43:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:43:10 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-16 19:43:10 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-16 19:43:10 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-16 19:43:10 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-16 19:43:10 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:43:10 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:43:10 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:43:10 LOG2 antvel: Parameters to Doppler: Topocentric 85390 2009 106 0.0 2009-Apr-16 19:43:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:43:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-16 19:43:10 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-16 19:43:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:43:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:43:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:43:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-16 19:43:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:43:10 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-16 19:43:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-16 19:43:10 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.952222 2009.29246172079 18.999933 2009-Apr-16 19:43:10 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000057 22.265000000000004 2009-Apr-16 19:43:10 LOG4 log_alfabeam: ALFABEAM 1 8.902396735977998 22.164242007264875 2009-Apr-16 19:43:10 LOG4 log_alfabeam: ALFABEAM 2 8.906497574205323 22.243266324955091 2009-Apr-16 19:43:10 LOG4 log_alfabeam: ALFABEAM 3 8.904208146769122 22.344563298085372 2009-Apr-16 19:43:10 LOG4 log_alfabeam: ALFABEAM 4 8.897534522348014 22.365526698731472 2009-Apr-16 19:43:10 LOG4 log_alfabeam: ALFABEAM 5 8.893413441509480 22.284556535005400 2009-Apr-16 19:43:10 LOG4 log_alfabeam: ALFABEAM 6 8.895985113356568 22.184605246909612 2009-Apr-16 19:43:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600153 2009-Apr-16 19:43:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:43:11 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-16 19:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-16 19:43:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:43:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:43:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-16 19:43:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85392.00 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:43:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 19:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-16 19:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-16 19:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 19:43:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:43:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:43:22 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-16 19:43:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:43:22 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-16 19:43:22 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-16 19:43:22 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-16 19:43:22 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-16 19:43:22 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:43:22 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:43:22 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:43:22 LOG2 antvel: Parameters to Doppler: Topocentric 85402 2009 106 0.0 2009-Apr-16 19:43:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:43:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-16 19:43:22 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-16 19:43:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:43:22 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:43:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:43:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-16 19:43:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:43:22 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-16 19:43:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-16 19:43:22 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.955565 2009.292462101047 18.999933 2009-Apr-16 19:43:22 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999993 22.264999999999997 2009-Apr-16 19:43:22 LOG4 log_alfabeam: ALFABEAM 1 8.902483489436328 22.164647874132431 2009-Apr-16 19:43:22 LOG4 log_alfabeam: ALFABEAM 2 8.906515964355796 22.244350049585268 2009-Apr-16 19:43:22 LOG4 log_alfabeam: ALFABEAM 3 8.904138996542914 22.345257932300179 2009-Apr-16 19:43:22 LOG4 log_alfabeam: ALFABEAM 4 8.897447981888854 22.365109863243127 2009-Apr-16 19:43:22 LOG4 log_alfabeam: ALFABEAM 5 8.893397146437048 22.283462296229882 2009-Apr-16 19:43:22 LOG4 log_alfabeam: ALFABEAM 6 8.896054541756879 22.183944294479403 2009-Apr-16 19:43:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600154 2009-Apr-16 19:43:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:43:23 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-16 19:43:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:43:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:43:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-16 19:43:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-16 19:43:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85404.00 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:43:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-16 19:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 19:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 19:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 19:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 19:43:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:43:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:43:34 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-16 19:43:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:43:34 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-16 19:43:34 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-16 19:43:34 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-16 19:43:34 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-16 19:43:34 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:43:34 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:43:34 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:43:34 LOG2 antvel: Parameters to Doppler: Topocentric 85414 2009 106 0.0 2009-Apr-16 19:43:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:43:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-16 19:43:34 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-16 19:43:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:43:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:43:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:43:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-16 19:43:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:43:34 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-16 19:43:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-16 19:43:34 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.958907 2009.292462481304 18.999933 2009-Apr-16 19:43:34 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000031 22.265000000000001 2009-Apr-16 19:43:34 LOG4 log_alfabeam: ALFABEAM 1 8.902569527173656 22.165066353947218 2009-Apr-16 19:43:34 LOG4 log_alfabeam: ALFABEAM 2 8.906533351107251 22.245432314950513 2009-Apr-16 19:43:34 LOG4 log_alfabeam: ALFABEAM 3 8.904069533236040 22.345938182987645 2009-Apr-16 19:43:34 LOG4 log_alfabeam: ALFABEAM 4 8.897362175786517 22.364680551965645 2009-Apr-16 19:43:34 LOG4 log_alfabeam: ALFABEAM 5 8.893381863588822 22.282370232953486 2009-Apr-16 19:43:34 LOG4 log_alfabeam: ALFABEAM 6 8.896124223553054 22.183297669616525 2009-Apr-16 19:43:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600155 2009-Apr-16 19:43:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:43:35 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-16 19:43:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:43:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:43:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-16 19:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 19:43:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85416.00 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:43:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:43:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:43:46 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-16 19:43:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:43:46 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-16 19:43:46 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-16 19:43:46 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-16 19:43:46 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-16 19:43:46 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:43:46 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:43:46 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:43:46 LOG2 antvel: Parameters to Doppler: Topocentric 85426 2009 106 0.0 2009-Apr-16 19:43:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:43:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-16 19:43:46 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-16 19:43:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:43:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:43:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:43:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-16 19:43:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:43:46 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-16 19:43:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-16 19:43:46 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.962249 2009.2924628615613 18.999933 2009-Apr-16 19:43:46 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000102 22.265000000000015 2009-Apr-16 19:43:46 LOG4 log_alfabeam: ALFABEAM 1 8.902654845939125 22.165497230980559 2009-Apr-16 19:43:46 LOG4 log_alfabeam: ALFABEAM 2 8.906549744177656 22.246512987990563 2009-Apr-16 19:43:46 LOG4 log_alfabeam: ALFABEAM 3 8.903999770588031 22.346604127532952 2009-Apr-16 19:43:46 LOG4 log_alfabeam: ALFABEAM 4 8.897277106927051 22.364238984917467 2009-Apr-16 19:43:46 LOG4 log_alfabeam: ALFABEAM 5 8.893367581962339 22.281280474588481 2009-Apr-16 19:43:46 LOG4 log_alfabeam: ALFABEAM 6 8.896194145642678 22.182665276917628 2009-Apr-16 19:43:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600156 2009-Apr-16 19:43:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:43:47 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-16 19:43:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:43:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:43:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-16 19:43:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85428.00 2009-Apr-16 19:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-16 19:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:43:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:43:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:43:58 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-16 19:43:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:43:58 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-16 19:43:58 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-16 19:43:58 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-16 19:43:58 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-16 19:43:58 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:43:58 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:43:58 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:43:58 LOG2 antvel: Parameters to Doppler: Topocentric 85438 2009 106 0.0 2009-Apr-16 19:43:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:43:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-16 19:43:58 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-16 19:43:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:43:58 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:43:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:43:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-16 19:43:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:43:58 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-16 19:43:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-16 19:43:58 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.965592 2009.2924632418183 18.999933 2009-Apr-16 19:43:58 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000087 22.264999999999997 2009-Apr-16 19:43:58 LOG4 log_alfabeam: ALFABEAM 1 8.902739442884791 22.165940293458274 2009-Apr-16 19:43:58 LOG4 log_alfabeam: ALFABEAM 2 8.906565153264317 22.247591941520231 2009-Apr-16 19:43:58 LOG4 log_alfabeam: ALFABEAM 3 8.903929721910401 22.347255845572562 2009-Apr-16 19:43:58 LOG4 log_alfabeam: ALFABEAM 4 8.897192777791794 22.363785377964245 2009-Apr-16 19:43:58 LOG4 log_alfabeam: ALFABEAM 5 8.893354290604364 22.280193144324176 2009-Apr-16 19:43:58 LOG4 log_alfabeam: ALFABEAM 6 8.896264295371401 22.182047019239683 2009-Apr-16 19:43:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600157 2009-Apr-16 19:43:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:43:59 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-16 19:43:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:43:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:43:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:43:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:43:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-16 19:43:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85440.00 2009-Apr-16 19:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:44:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:44:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:44:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 1.050 0.995 0.985 2009-Apr-16 19:44:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.903 1.008 1.025 2009-Apr-16 19:44:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.006 1.086 0.976 1.079 2009-Apr-16 19:44:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.945 0.122 2009-Apr-16 19:44:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:44:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:44:10 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-16 19:44:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:44:10 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-16 19:44:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-16 19:44:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-16 19:44:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-16 19:44:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:44:10 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-16 19:44:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:44:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-16 19:44:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:44:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:44:10 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-16 19:44:10 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-16 19:44:10 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-16 19:44:10 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-16 19:44:10 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:44:10 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:44:10 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:44:10 LOG2 antvel: Parameters to Doppler: Topocentric 85450 2009 106 0.0 2009-Apr-16 19:44:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:44:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-16 19:44:10 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-16 19:44:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:44:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:44:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:44:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-16 19:44:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:44:10 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-16 19:44:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-16 19:44:10 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.968934 2009.2924636220753 18.999933 2009-Apr-16 19:44:10 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999997 22.265000000000001 2009-Apr-16 19:44:10 LOG4 log_alfabeam: ALFABEAM 1 8.902823240650408 22.166394920245434 2009-Apr-16 19:44:10 LOG4 log_alfabeam: ALFABEAM 2 8.906579575518418 22.248668088930749 2009-Apr-16 19:44:10 LOG4 log_alfabeam: ALFABEAM 3 8.903859463278634 22.347892853245302 2009-Apr-16 19:44:10 LOG4 log_alfabeam: ALFABEAM 4 8.897109265109400 22.363320365393403 2009-Apr-16 19:44:10 LOG4 log_alfabeam: ALFABEAM 5 8.893341989230878 22.279109331013746 2009-Apr-16 19:44:10 LOG4 log_alfabeam: ALFABEAM 6 8.896334597326584 22.181443333584813 2009-Apr-16 19:44:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600158 2009-Apr-16 19:44:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:44:11 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-16 19:44:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:44:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-16 19:44:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-16 19:44:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85452.00 2009-Apr-16 19:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-16 19:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-16 19:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-16 19:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2009-Apr-16 19:44:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:44:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:44:22 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-16 19:44:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:44:22 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-16 19:44:22 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-16 19:44:22 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-16 19:44:22 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-16 19:44:22 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:44:22 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:44:22 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:44:22 LOG2 antvel: Parameters to Doppler: Topocentric 85462 2009 106 0.0 2009-Apr-16 19:44:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:44:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-16 19:44:22 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-16 19:44:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:44:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:44:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:44:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-16 19:44:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:44:22 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-16 19:44:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-16 19:44:22 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.972277 2009.2924640023323 18.999933 2009-Apr-16 19:44:22 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000114 22.265000000000008 2009-Apr-16 19:44:22 LOG4 log_alfabeam: ALFABEAM 1 8.902906263951822 22.166861018285292 2009-Apr-16 19:44:22 LOG4 log_alfabeam: ALFABEAM 2 8.906593027037925 22.249741642307711 2009-Apr-16 19:44:22 LOG4 log_alfabeam: ALFABEAM 3 8.903788986614666 22.348515456769622 2009-Apr-16 19:44:22 LOG4 log_alfabeam: ALFABEAM 4 8.897026543843122 22.362844040502672 2009-Apr-16 19:44:22 LOG4 log_alfabeam: ALFABEAM 5 8.893330661175360 22.278028814079917 2009-Apr-16 19:44:22 LOG4 log_alfabeam: ALFABEAM 6 8.896405060419026 22.180853907548553 2009-Apr-16 19:44:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600159 2009-Apr-16 19:44:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:44:23 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-16 19:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.556 (still bad) 2009-Apr-16 19:44:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:44:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-16 19:44:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-16 19:44:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85464.00 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.552 (still bad) 2009-Apr-16 19:44:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2009-Apr-16 19:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2009-Apr-16 19:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2009-Apr-16 19:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.553 (still bad) 2009-Apr-16 19:44:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:44:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:44:34 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-16 19:44:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:44:34 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-16 19:44:34 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-16 19:44:34 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-16 19:44:34 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-16 19:44:34 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:44:34 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:44:34 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:44:34 LOG2 antvel: Parameters to Doppler: Topocentric 85474 2009 106 0.0 2009-Apr-16 19:44:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:44:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-16 19:44:34 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-16 19:44:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:44:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:44:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:44:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-16 19:44:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:44:34 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-16 19:44:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-16 19:44:34 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.975619 2009.2924643825893 18.999933 2009-Apr-16 19:44:34 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999999 22.265000000000004 2009-Apr-16 19:44:34 LOG4 log_alfabeam: ALFABEAM 1 8.902988439046382 22.167337935829035 2009-Apr-16 19:44:34 LOG4 log_alfabeam: ALFABEAM 2 8.906605508292458 22.250811537690559 2009-Apr-16 19:44:34 LOG4 log_alfabeam: ALFABEAM 3 8.903718367754006 22.349123227417298 2009-Apr-16 19:44:34 LOG4 log_alfabeam: ALFABEAM 4 8.896944687044545 22.362357067213871 2009-Apr-16 19:44:34 LOG4 log_alfabeam: ALFABEAM 5 8.893320302893757 22.276952656649375 2009-Apr-16 19:44:34 LOG4 log_alfabeam: ALFABEAM 6 8.896475609705830 22.180279124671799 2009-Apr-16 19:44:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600160 2009-Apr-16 19:44:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:44:35 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-16 19:44:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:44:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-16 19:44:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-16 19:44:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-16 19:44:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85476.00 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.550 (still bad) 2009-Apr-16 19:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.550 (still bad) 2009-Apr-16 19:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.555 (still bad) 2009-Apr-16 19:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.549 (still bad) 2009-Apr-16 19:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.548 (still bad) 2009-Apr-16 19:44:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:44:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:44:46 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-16 19:44:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:44:46 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-16 19:44:46 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-16 19:44:46 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-16 19:44:46 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-16 19:44:46 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:44:46 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29246 J 2009-Apr-16 19:44:46 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:44:46 LOG2 antvel: Parameters to Doppler: Topocentric 85486 2009 106 0.0 2009-Apr-16 19:44:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:44:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-16 19:44:46 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-16 19:44:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:44:46 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:44:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:44:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-16 19:44:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:44:46 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-16 19:44:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-16 19:44:46 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.978962 2009.2924647628465 18.999933 2009-Apr-16 19:44:46 LOG4 log_alfabeam: ALFABEAM 0 8.899999999999967 22.264999999999990 2009-Apr-16 19:44:46 LOG4 log_alfabeam: ALFABEAM 1 8.903069792398810 22.167825578312296 2009-Apr-16 19:44:46 LOG4 log_alfabeam: ALFABEAM 2 8.906617036282251 22.251878004222952 2009-Apr-16 19:44:46 LOG4 log_alfabeam: ALFABEAM 3 8.903647597773045 22.349716491029465 2009-Apr-16 19:44:46 LOG4 log_alfabeam: ALFABEAM 4 8.896863667913264 22.361859539724847 2009-Apr-16 19:44:46 LOG4 log_alfabeam: ALFABEAM 5 8.893310896889936 22.275880619773474 2009-Apr-16 19:44:46 LOG4 log_alfabeam: ALFABEAM 6 8.896546255029181 22.179718654335819 2009-Apr-16 19:44:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600161 2009-Apr-16 19:44:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:44:47 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-16 19:44:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:44:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-16 19:44:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-16 19:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.553 (still bad) 2009-Apr-16 19:44:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85488.00 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:44:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.540 (still bad) 2009-Apr-16 19:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.539 (still bad) 2009-Apr-16 19:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.546 (still bad) 2009-Apr-16 19:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.539 (still bad) 2009-Apr-16 19:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.542 (still bad) 2009-Apr-16 19:44:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:44:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:44:58 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-16 19:44:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:44:58 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-16 19:44:58 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-16 19:44:58 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-16 19:44:58 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-16 19:44:58 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:44:58 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29247 J 2009-Apr-16 19:44:58 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:44:58 LOG2 antvel: Parameters to Doppler: Topocentric 85498 2009 106 0.0 2009-Apr-16 19:44:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:44:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-16 19:44:58 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-16 19:44:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:44:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:44:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:44:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-16 19:44:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:44:58 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-16 19:44:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-16 19:44:58 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.982304 2009.2924651431035 18.999933 2009-Apr-16 19:44:58 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000054 22.265000000000004 2009-Apr-16 19:44:58 LOG4 log_alfabeam: ALFABEAM 1 8.903150254017064 22.168323268243192 2009-Apr-16 19:44:58 LOG4 log_alfabeam: ALFABEAM 2 8.906627614600843 22.252940004243442 2009-Apr-16 19:44:58 LOG4 log_alfabeam: ALFABEAM 3 8.903576751924508 22.350294872817017 2009-Apr-16 19:44:58 LOG4 log_alfabeam: ALFABEAM 4 8.896783555700651 22.361352146680069 2009-Apr-16 19:44:58 LOG4 log_alfabeam: ALFABEAM 5 8.893302436576215 22.274813737380342 2009-Apr-16 19:44:58 LOG4 log_alfabeam: ALFABEAM 6 8.896616922240224 22.179172828075476 2009-Apr-16 19:44:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600162 2009-Apr-16 19:44:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:44:59 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-16 19:44:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:44:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-16 19:44:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:44:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-16 19:44:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85500.00 2009-Apr-16 19:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.545 (still bad) 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Apr-16 19:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.526 (still bad) 2009-Apr-16 19:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Apr-16 19:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.528 (still bad) 2009-Apr-16 19:45:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:45:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.431 1.445 1.376 1.359 2009-Apr-16 19:45:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.316 1.264 1.420 1.421 2009-Apr-16 19:45:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.426 1.527 1.385 1.455 2009-Apr-16 19:45:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.515 0.099 1.351 0.122 2009-Apr-16 19:45:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:45:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:45:10 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-16 19:45:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:45:10 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-16 19:45:10 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-16 19:45:10 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-16 19:45:10 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-16 19:45:10 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:45:10 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29247 J 2009-Apr-16 19:45:10 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:45:10 LOG2 antvel: Parameters to Doppler: Topocentric 85510 2009 106 0.0 2009-Apr-16 19:45:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:45:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-16 19:45:10 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-16 19:45:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:45:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:45:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:45:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-16 19:45:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:45:10 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-16 19:45:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-16 19:45:10 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.985647 2009.2924655233605 18.999933 2009-Apr-16 19:45:10 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000016 22.265000000000001 2009-Apr-16 19:45:10 LOG4 log_alfabeam: ALFABEAM 1 8.903229852114475 22.168830912604783 2009-Apr-16 19:45:10 LOG4 log_alfabeam: ALFABEAM 2 8.906637260989100 22.253997785399392 2009-Apr-16 19:45:10 LOG4 log_alfabeam: ALFABEAM 3 8.903505820266965 22.350858716614383 2009-Apr-16 19:45:10 LOG4 log_alfabeam: ALFABEAM 4 8.896704321848169 22.360834980117300 2009-Apr-16 19:45:10 LOG4 log_alfabeam: ALFABEAM 5 8.893294903798296 22.273751750868868 2009-Apr-16 19:45:10 LOG4 log_alfabeam: ALFABEAM 6 8.896687622267461 22.178641298809342 2009-Apr-16 19:45:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600163 2009-Apr-16 19:45:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:45:11 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-16 19:45:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:45:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-16 19:45:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-16 19:45:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85512.00 2009-Apr-16 19:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.529 (still bad) 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:45:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Apr-16 19:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.525 (still bad) 2009-Apr-16 19:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.531 (still bad) 2009-Apr-16 19:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.531 (still bad) 2009-Apr-16 19:45:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Apr-16 19:45:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:45:22 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-16 19:45:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:45:22 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-16 19:45:22 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-16 19:45:22 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-16 19:45:22 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-16 19:45:22 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:45:22 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29247 J 2009-Apr-16 19:45:22 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:45:22 LOG2 antvel: Parameters to Doppler: Topocentric 85522 2009 106 0.0 2009-Apr-16 19:45:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:45:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-16 19:45:22 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-16 19:45:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:45:22 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:45:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:45:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-16 19:45:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-16 19:45:22 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-16 19:45:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-16 19:45:22 LOG5 log_alfabeam: Parameters: 8.9000000000000004 22.265000000000001 8.988989 2009.2924659036175 18.999933 2009-Apr-16 19:45:22 LOG4 log_alfabeam: ALFABEAM 0 8.900000000000043 22.265000000000001 2009-Apr-16 19:45:22 LOG4 log_alfabeam: ALFABEAM 1 8.903308520535072 22.169347813011345 2009-Apr-16 19:45:22 LOG4 log_alfabeam: ALFABEAM 2 8.906645981948598 22.255050339494549 2009-Apr-16 19:45:22 LOG4 log_alfabeam: ALFABEAM 3 8.903434877153042 22.351407699886860 2009-Apr-16 19:45:22 LOG4 log_alfabeam: ALFABEAM 4 8.896626031729918 22.360308748530542 2009-Apr-16 19:45:22 LOG4 log_alfabeam: ALFABEAM 5 8.893288289159013 22.272695662009127 2009-Apr-16 19:45:22 LOG4 log_alfabeam: ALFABEAM 6 8.896758282051554 22.178124347968176 2009-Apr-16 19:45:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910600164 2009-Apr-16 19:45:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-16 19:45:23 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-16 19:45:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:45:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-16 19:45:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-16 19:45:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85524.00 2009-Apr-16 19:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.533 (still bad) 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:45:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.528 (still bad) 2009-Apr-16 19:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Apr-16 19:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2009-Apr-16 19:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.525 (still bad) 2009-Apr-16 19:45:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:45:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-16 19:45:34 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-16 19:45:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-16 19:45:34 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-16 19:45:34 INFO2 smartfreq: Switching off CAL 2009-Apr-16 19:45:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 19:45:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 19:45:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:45:34 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-16 19:45:34 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:45:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:45:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:45:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:45:34 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-16 19:45:34 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-16 19:45:34 LOG5 antvel: Calling 'antvel 85400.000000 221554.000000 J Topocentric 0' 2009-Apr-16 19:45:34 LOG2 antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29247 J 2009-Apr-16 19:45:34 LOG2 antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:45:34 LOG2 antvel: Parameters to Doppler: Topocentric 85534 2009 106 0.0 2009-Apr-16 19:45:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:45:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-16 19:45:34 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-16 19:45:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:45:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:45:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:45:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:34 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-16 19:45:34 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-16 19:45:34 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-16 19:45:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:45:34 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-16 19:45:34 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-16 19:45:34 NOTE run_command_file: DONE with command file processing 2009-Apr-16 19:45:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-16 19:45:35 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-16 19:45:35 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-16 19:45:35 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-16 19:45:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:45:35 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-16 19:45:35 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-16 19:45:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.528 (still bad) 2009-Apr-16 19:45:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:41 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-16 19:45:41 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-16 19:45:41 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-16 19:45:41 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-16 19:45:41 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-16 19:45:41 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-16 19:45:41 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-16 19:45:41 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-16 19:45:41 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-16 19:45:41 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-16 19:45:41 LOG3 exec_msg: Closing socket 2009-Apr-16 19:45:41 LOG3 exec_msg: Closing socket 2009-Apr-16 19:45:41 LOG3 exec_msg: Closing socket 2009-Apr-16 19:45:41 LOG3 exec_msg: Closing socket 2009-Apr-16 19:45:43 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-16 19:45:43 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-16 19:45:43 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-16 19:45:44 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-16 19:45:54 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-16 19:45:54 LOG2 CIMA-antvel: Precessing RA = 08:54:00.0 Dec = +22:15:54.0 Epoch = 2009.29247 J 2009-Apr-16 19:45:54 LOG2 CIMA-antvel: Computed apparent RA = 08:54:33.6 Dec = +22:13:46.4 2009-Apr-16 19:45:54 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 85554 2009 106 0.0 2009-Apr-16 19:45:54 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-16 19:45:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-16 19:45:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-16 19:45:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-16 19:45:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-16 19:45:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-16 19:45:56 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-16 19:45:56 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-16 19:45:56 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-16 19:45:56 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-16 19:45:56 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-16 19:45:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-16 19:45:56 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-16 19:45:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:45:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:45:56 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:45:56 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-16 19:45:56 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:45:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:45:56 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-16 19:45:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:45:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:45:56 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-16 19:45:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-16 19:45:56 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-16 19:45:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-16 19:45:56 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-16 19:45:56 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-16 19:45:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-16 19:45:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:45:56 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-16 19:45:56 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-16 19:45:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-16 19:45:56 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-16 19:45:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-16 19:45:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-16 19:45:56 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-16 19:45:56 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-16 19:45:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:45:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-16 19:45:56 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-16 19:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-16 19:45:57 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-16 19:45:57 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-16 19:45:57 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-16 19:45:57 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-16 19:45:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-16 19:45:57 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-16 19:45:57 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-16 19:45:57 START begin_task: Starting task 'selecting calibration port' 2009-Apr-16 19:45:57 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-16 19:45:57 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-16 19:45:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-16 19:45:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:45:57 START begin_task: Starting task 'waiting on calport' 2009-Apr-16 19:45:57 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-16 19:45:57 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-16 19:45:57 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-16 19:45:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:45:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:57 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:45:57 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-16 19:45:57 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-16 19:45:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-16 19:45:57 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-16 19:45:57 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-16 19:45:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 19:45:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 19:45:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:45:57 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-16 19:45:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:45:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:45:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:45:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:45:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:45:57 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-16 19:45:57 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-16 19:45:57 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-16 19:45:57 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 19:45:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 19:45:58 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-16 19:45:58 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-16 19:45:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:45:58 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-16 19:45:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-16 19:45:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-16 19:45:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:45:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 19:45:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:45:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:45:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:45:58 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-16 19:45:58 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-16 19:45:58 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-16 19:45:58 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-16 19:45:58 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-16 19:45:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:45:58 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-16 19:45:58 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-16 19:45:58 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-16 19:45:58 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-16 19:45:58 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-16 19:45:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-16 19:45:58 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-16 19:45:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-16 19:45:58 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-16 19:45:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-16 19:45:58 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-16 19:45:58 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-16 19:45:58 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-16 19:45:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:45:58 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-16 19:45:58 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-16 19:45:59 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-16 19:45:59 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-16 19:45:59 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-16 19:46:17 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-16 19:46:17 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-16 19:46:17 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 19:46:17 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-16 19:46:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-16 19:46:17 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-16 19:46:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-16 19:46:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-16 19:46:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:46:17 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-16 19:46:17 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-16 19:46:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-16 19:46:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:46:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:46:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:46:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-16 19:46:21 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-16 19:46:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-16 19:46:21 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 19:46:21 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-16 19:46:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-16 19:46:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:46:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:46:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:46:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:46:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-16 19:46:21 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-16 19:46:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-16 19:46:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:46:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-16 19:46:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-16 19:46:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-16 19:46:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-16 19:46:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-16 19:46:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-16 19:46:21 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-16 19:46:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.028 1.059 ALFA beam 1: 1.002 0.995 2009-Apr-16 19:46:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.940 0.908 ALFA beam 3: 1.002 1.011 2009-Apr-16 19:46:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.995 1.067 ALFA beam 5: 0.986 1.076 2009-Apr-16 19:46:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.045 0.097 ALFA beam 7: 0.939 0.120 2009-Apr-16 19:46:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 19:46:21 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-16 19:46:21 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-16 19:46:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:46:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 19:46:22 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-16 19:46:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-16 19:46:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 19:46:22 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-16 19:46:22 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-16 19:46:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 19:46:22 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 19:46:22 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-16 19:46:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2009-Apr-16 19:46:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.059 1.002 0.995 2009-Apr-16 19:46:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.908 1.002 1.011 2009-Apr-16 19:46:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.067 0.986 1.076 2009-Apr-16 19:46:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.097 0.939 0.120 2009-Apr-16 19:46:30 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-16 19:46:30 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 090200.0 +221554 J 0 Topocentric velocity(optical) 2009-Apr-16 19:46:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 090200.0 +221554 J 0 Topocentric velocity(optical)' 2009-Apr-16 19:46:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-16 19:46:30 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-16 19:46:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Apr-16 19:46:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-16 19:46:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift92p1} 2009-Apr-16 19:46:30 INFO5 fixed_driftmap: Start: year = 2009.2924680584076 RA = 09:02:33.5 Dec = +22:13:41.4 2009-Apr-16 19:46:30 NOTE fixed_driftmap: Setting ZA to 3:52:27.7 ... 2009-Apr-16 19:46:30 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 3.87 2009-Apr-16 19:46:30 LOG3 track_source: Calling 'track_source drift92p1 180.0 3.8743651805 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-16 19:46:30 START begin_task: Starting task 'sending tracking commands' 2009-Apr-16 19:46:30 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-16 19:46:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Slewing to source 'drift92p1' ...} 2009-Apr-16 19:46:30 INFO1 track_source: Starting to track drift92p1 2009-Apr-16 19:46:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p1" 2009-Apr-16 19:46:30 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-16 19:46:30 LOG3 vw_send: To DATATAKING: set dec 3.8743651805 2009-Apr-16 19:46:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-16 19:46:30 LOG3 vw_send: To DATATAKING: pnt tr 180.0 3.8743651805 -CF 2009-Apr-16 19:46:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-16 19:46:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-16 19:46:30 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-16 19:46:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-16 19:46:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:46:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-16 19:46:30 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-16 19:46:30 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-16 19:46:30 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-16 19:46:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-16 19:46:30 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-16 19:46:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-16 19:46:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-16 19:46:31 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-16 19:46:31 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p1" 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: set dec 3.8743651805 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: vw% 3.8743651805 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 3.8743651805 -CF 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-16 19:46:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:46:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-16 19:46:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-16 19:46:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-16 19:46:31 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-16 19:46:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-16 19:46:31 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-16 19:46:31 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-16 19:46:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-16 19:46:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:46:31 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-16 19:46:31 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-16 19:46:31 START begin_task: Starting task 'waiting on telescope' 2009-Apr-16 19:46:31 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-16 19:46:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-16 19:46:31 LOG3 waittrk: Start waittrk 5 2009-Apr-16 19:46:31 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-16 19:46:31 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-16 19:46:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-16 19:46:36 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-16 19:46:36 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-16 19:46:36 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-16 19:47:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-16 19:47:30 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-16 19:47:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-16 19:47:30 INFO2 waittrk: Now tracking drift92p1 2009-Apr-16 19:47:30 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 3.89 2009-Apr-16 19:47:30 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-16 19:47:30 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-16 19:47:30 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-16 19:47:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:47:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-16 19:47:30 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-16 19:47:30 START begin_task: Starting task 'selecting calibration type' 2009-Apr-16 19:47:30 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-16 19:47:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-16 19:47:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-16 19:47:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:47:30 START begin_task: Starting task 'waiting on setcal' 2009-Apr-16 19:47:30 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-16 19:47:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-16 19:47:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:47:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:47:30 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:47:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-16 19:47:30 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-16 19:47:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-16 19:47:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:47:31 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-16 19:47:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:47:31 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-16 19:47:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:47:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:47:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:47:31 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-16 19:47:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:47:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-16 19:47:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:47:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:47:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:47:31 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-16 19:47:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:47:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:47:31 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-16 19:47:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:47:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:47:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-16 19:47:31 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-16 19:47:31 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Apr-16 19:47:31 INFO2 astwait: Waiting for 4 seconds from 23:47:31 to 23:47:35 UTC ... 2009-Apr-16 19:47:31 LOG4 send_obs_status: To obs_status: <1> TASKTIME 4 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-16 19:47:31 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Apr-16 19:47:31 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-16 19:47:35 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Apr-16 19:47:35 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-16 19:47:35 INFO3 astwait: Finished waiting 2009-Apr-16 19:47:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-16 19:47:35 LOG5 dopset_later: Calling 'dopset_later 60.652318822565867' 2009-Apr-16 19:47:35 INFO3 dopset_later: Setting Doppler correction for 19:48:35 (60.7 seconds from now) 2009-Apr-16 19:47:35 LOG5 antvel: Calling 'antvel 180.000000 3.874365 F Topocentric 60.652318822565867' 2009-Apr-16 19:47:35 LOG2 antvel: Transforming current Az = 180.00 ZA = 3.87 to apparent RA = 09:02:33.4 Dec = +22:13:41.4 2009-Apr-16 19:47:35 LOG2 antvel: Parameters to Doppler: Topocentric 85715 2009 106 0.0 2009-Apr-16 19:47:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 19:47:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-16 19:47:35 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-16 19:47:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 19:47:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 19:47:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:47:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:47:35 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 19:47:35 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-16 19:47:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-16 19:47:35 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-16 19:47:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-16 19:47:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-16 19:47:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:47:35 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-16 19:47:35 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-16 19:47:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 19:47:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 19:47:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-16 19:47:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:47:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:47:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:47:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:47:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:47:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-16 19:47:38 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-16 19:47:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-16 19:47:38 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 19:47:38 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-16 19:47:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-16 19:47:38 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:47:38 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:47:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:47:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 19:47:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-16 19:47:38 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-16 19:47:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-16 19:47:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:47:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-16 19:47:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-16 19:47:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-16 19:47:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-16 19:47:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-16 19:47:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-16 19:47:38 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-16 19:47:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.032 1.061 ALFA beam 1: 1.004 0.990 2009-Apr-16 19:47:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.945 0.905 ALFA beam 3: 1.020 1.028 2009-Apr-16 19:47:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.007 1.086 ALFA beam 5: 0.995 1.090 2009-Apr-16 19:47:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.064 0.099 ALFA beam 7: 0.948 0.122 2009-Apr-16 19:47:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 19:47:39 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-16 19:47:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-16 19:47:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:47:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 19:47:39 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-16 19:47:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-16 19:47:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 19:47:39 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-16 19:47:39 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-16 19:47:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:47:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 19:47:39 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-16 19:47:39 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:02:33.5 LST = 09:01:36.7 diff = 56.8 secs 2009-Apr-16 19:47:39 INFO2 fixed_driftmap: Waiting 54.8 seconds for RA 9:02:34 2009-Apr-16 19:47:39 INFO2 lstwait: Waiting for 54.7 secs from LST 09:01:37 to LST 09:02:32 ... 2009-Apr-16 19:47:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 54.658329618721353 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-16 19:47:39 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-16 19:47:39 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-16 19:47:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:47:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.061 1.004 0.990 2009-Apr-16 19:47:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.905 1.020 1.028 2009-Apr-16 19:47:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 1.086 0.995 1.090 2009-Apr-16 19:47:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.948 0.122 2009-Apr-16 19:48:33 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-16 19:48:33 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-16 19:48:33 LOG4 lstwait: Finished waiting 0.34 seconds late 2009-Apr-16 19:48:33 INFO3 lstwait: Finished waiting 2009-Apr-16 19:48:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-16 19:48:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 19:48:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 19:48:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 19:48:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 19:48:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-16 19:48:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-16 19:48:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-16 19:48:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-16 19:48:34 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 19:48:34 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-16 19:48:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-16 19:48:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 19:48:34 INFO2 take_data: Starting WAPP 600-second scan: 910600165 2009-Apr-16 19:48:34 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 19:48:34 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-16 19:48:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 19:48:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:48:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-16 19:48:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85715.00 2009-Apr-16 19:48:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20090416.a2010.0017.fits 2009-Apr-16 19:48:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090416.a2010.0017.fits} 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:48:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:48:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.059 1.007 0.993 2009-Apr-16 19:48:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.905 1.021 1.029 2009-Apr-16 19:48:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.090 0.999 1.093 2009-Apr-16 19:48:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.099 0.948 0.122 2009-Apr-16 19:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:24 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:49:24.296 (seconds: 71364.296)!} 2009-Apr-16 19:49:24 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:49:24.296 (seconds: 71364.296)! 2009-Apr-16 19:49:25 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 71363.0 to 71364.0! 2009-Apr-16 19:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2009-Apr-16 19:49:26 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (71363.0 - 71365.0)! 2009-Apr-16 19:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:49:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:49:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.057 1.006 0.992 2009-Apr-16 19:49:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.909 1.021 1.028 2009-Apr-16 19:49:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 1.087 0.995 1.091 2009-Apr-16 19:49:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.099 0.949 0.122 2009-Apr-16 19:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 19:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:50:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:50:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.058 1.003 0.991 2009-Apr-16 19:50:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.908 1.051 1.057 2009-Apr-16 19:50:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.088 0.994 1.088 2009-Apr-16 19:50:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.948 0.122 2009-Apr-16 19:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2009-Apr-16 19:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.181 (still bad) 2009-Apr-16 19:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.223 (still bad) 2009-Apr-16 19:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.253 (still bad) 2009-Apr-16 19:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.256 (still bad) 2009-Apr-16 19:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.238 (still bad) 2009-Apr-16 19:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.210 (still bad) 2009-Apr-16 19:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2009-Apr-16 19:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-16 19:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 19:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-16 19:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2009-Apr-16 19:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.163 (still bad) 2009-Apr-16 19:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.170 (still bad) 2009-Apr-16 19:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.173 (still bad) 2009-Apr-16 19:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.164 (still bad) 2009-Apr-16 19:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2009-Apr-16 19:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2009-Apr-16 19:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2009-Apr-16 19:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.166 (still bad) 2009-Apr-16 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.201 (still bad) 2009-Apr-16 19:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.233 (still bad) 2009-Apr-16 19:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.252 (still bad) 2009-Apr-16 19:51:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:51:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.063 1.007 0.995 2009-Apr-16 19:51:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.904 1.020 1.028 2009-Apr-16 19:51:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.093 1.139 1.255 2009-Apr-16 19:51:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.948 0.122 2009-Apr-16 19:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.238 (still bad) 2009-Apr-16 19:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.204 (still bad) 2009-Apr-16 19:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.167 (still bad) 2009-Apr-16 19:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2009-Apr-16 19:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-16 19:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-16 19:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-16 19:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2009-Apr-16 19:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2009-Apr-16 19:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2009-Apr-16 19:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2009-Apr-16 19:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2009-Apr-16 19:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-16 19:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 19:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-16 19:52:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:52:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.060 1.003 0.992 2009-Apr-16 19:52:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.902 1.021 1.027 2009-Apr-16 19:52:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.090 0.998 1.088 2009-Apr-16 19:52:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.950 0.122 2009-Apr-16 19:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:53:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:53:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 1.071 1.011 0.997 2009-Apr-16 19:53:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.909 1.025 1.038 2009-Apr-16 19:53:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.091 1.004 1.100 2009-Apr-16 19:53:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.099 0.956 0.122 2009-Apr-16 19:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-16 19:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:54:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:54:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.060 1.005 0.993 2009-Apr-16 19:54:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.907 1.021 1.032 2009-Apr-16 19:54:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.093 0.995 1.093 2009-Apr-16 19:54:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.948 0.122 2009-Apr-16 19:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 19:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 19:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 19:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-16 19:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:55:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:55:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.058 1.001 0.991 2009-Apr-16 19:55:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.907 1.019 1.028 2009-Apr-16 19:55:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.093 0.994 1.089 2009-Apr-16 19:55:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.099 0.944 0.122 2009-Apr-16 19:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-16 19:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:56:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:56:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.063 1.004 0.993 2009-Apr-16 19:56:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.910 1.020 1.028 2009-Apr-16 19:56:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.093 0.997 1.087 2009-Apr-16 19:56:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.099 0.945 0.122 2009-Apr-16 19:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 19:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 19:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 19:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-16 19:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:57:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 19:57:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.062 1.002 0.992 2009-Apr-16 19:57:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.909 1.021 1.030 2009-Apr-16 19:57:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.092 0.994 1.090 2009-Apr-16 19:57:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.099 0.944 0.122 2009-Apr-16 19:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 19:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-16 19:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 19:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 19:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-16 19:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 19:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 19:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 19:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 19:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 19:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 19:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 19:58:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:58:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-16 19:58:35 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-16 19:58:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-16 19:58:35 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-16 19:58:35 LOG1 fixed_driftmap: New position: year = 2009.2924910322713 RA = 09:12:02.9 RA/Dec = 09:12:36.4 +22:13:35.4 2009-Apr-16 19:58:35 NOTE fixed_driftmap: Correcting ZA to 3:52:21.7 ... 2009-Apr-16 19:58:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8726925682 -CF 2009-Apr-16 19:58:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-16 19:58:35 START begin_task: Starting task 'WAPP calibration' 2009-Apr-16 19:58:35 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-16 19:58:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-16 19:58:35 START begin_task: Starting task 'selecting calibration type' 2009-Apr-16 19:58:35 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-16 19:58:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-16 19:58:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-16 19:58:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:58:35 START begin_task: Starting task 'waiting on setcal' 2009-Apr-16 19:58:35 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-16 19:58:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8726925682 -CF 2009-Apr-16 19:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 19:58:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:58:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-16 19:58:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 19:58:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:58:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 19:58:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-16 19:58:35 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-16 19:58:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-16 19:58:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:58:35 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-16 19:58:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:58:35 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:58:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:58:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:58:36 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:58:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-16 19:58:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 19:58:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:58:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 19:58:36 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 19:58:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 19:58:36 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 19:58:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 19:58:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-16 19:58:36 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-16 19:58:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-16 19:58:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-16 19:58:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:58:36 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:58:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-16 19:58:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:58:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:58:36 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-16 19:58:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 19:58:36 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-16 19:58:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 19:58:36 INFO2 take_data: Starting WAPP 1-second scan: 910600166 2009-Apr-16 19:58:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 19:58:36 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-16 19:58:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:58:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-16 19:58:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86317.00 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:58:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:58:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:58:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-16 19:58:38 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-16 19:58:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-16 19:58:38 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-16 19:58:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-16 19:58:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 19:58:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 19:58:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 19:58:38 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-16 19:58:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 19:58:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 19:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.549 (still bad) 2009-Apr-16 19:58:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 19:58:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 19:58:38 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-16 19:58:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-16 19:58:38 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-16 19:58:38 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-16 19:58:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-16 19:58:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 19:58:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-16 19:58:38 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-16 19:58:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-16 19:58:38 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-16 19:58:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 19:58:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 19:58:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 19:58:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 19:58:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-16 19:58:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-16 19:58:39 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 19:58:39 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-16 19:58:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-16 19:58:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 19:58:39 INFO2 take_data: Starting WAPP 600-second scan: 910600167 2009-Apr-16 19:58:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 19:58:39 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-16 19:58:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 19:58:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 19:58:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-16 19:58:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86320.00 2009-Apr-16 19:58:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20090416.a2010.0018.fits 2009-Apr-16 19:58:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090416.a2010.0018.fits} 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 19:58:41 LOG5 wapp_failed: Calling 'wapp_failed 3' 2009-Apr-16 19:58:41 ERROR wapp_failed: ERROR WAPP-3 failed to complete its current task! 2009-Apr-16 19:58:41 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 abort' 2009-Apr-16 19:58:41 START begin_task: Starting task 'handling WAPP failure' 2009-Apr-16 19:58:41 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-16 19:58:41 NOTE handle_wapp_failure: Will abort task 'fixed azimuth drift map' since the WAPP failure preference is set to 'abort'! 2009-Apr-16 19:58:41 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2009-Apr-16 19:58:41 LOG1 task_failed: Task 'handling WAPP failure' failed! 2009-Apr-16 19:58:41 LOG5 task_failed: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-16 19:58:41 WARNING abort_task: WARNING abort requested! 2009-Apr-16 19:58:41 WARNING abort_task: WARNING Aborting handling WAPP failure 2009-Apr-16 19:58:41 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2009-Apr-16 19:58:41 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2009-Apr-16 19:58:41 LOG5 end_task: Level: (4) ID = <10135> Status = 1 0 0 1 failed 2009-Apr-16 19:58:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'FAILED' 2009-Apr-16 19:58:41 LOG5 end_task: Level: (3) ID = <10134> Status = 1 0 0 1 failed 2009-Apr-16 19:58:41 LOG4 stop_backends: Calling 'stop_backends' 2009-Apr-16 19:58:41 START begin_task: Starting task 'stopping the WAPPs' 2009-Apr-16 19:58:41 LOG5 begin_task: Level: (3) ID = <10136> Status = 1 0 0 1 failed 2009-Apr-16 19:58:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Apr-16 19:58:41 INFO1 stop_wapp: Stopping the WAPPs 2009-Apr-16 19:58:41 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Apr-16 19:58:41 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Apr-16 19:58:41 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Apr-16 19:58:41 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Apr-16 19:58:41 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Apr-16 19:58:41 LOG5 begin_task: Level: (4) ID = <10137> Status = 1 0 0 1 failed 2009-Apr-16 19:58:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 19:58:41 LOG3 WAPP=1+2+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 19:58:41 ERROR WAPP=3-read_timeout: ERROR time-out while waiting for data from the correlator! 2009-Apr-16 19:58:41 ERROR WAPP=3-start_spectra: ERROR failed to read spectral line data! 2009-Apr-16 19:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.549 (still bad) 2009-Apr-16 19:58:42 PROBLEM WAPP=3-start_spectra: Reason: Connection timed out! 2009-Apr-16 19:58:42 ERROR WAPP=3-start_spectra: ERROR the correlator has failed to start! 2009-Apr-16 19:58:42 INFO1 WAPP=3-start_spectra: DONE with spectral line observation 2009-Apr-16 19:58:42 INFO1 WAPP=3-wappcon: Can't abort --- the WAPP isn't running 2009-Apr-16 19:58:43 NOTE WAPP=1+2+4-wappcon: WAPP successfully aborted! 2009-Apr-16 19:58:43 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2009-Apr-16 19:58:43 LOG5 end_task: Level: (4) ID = <10137> Status = 1 0 0 1 failed 2009-Apr-16 19:58:43 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2009-Apr-16 19:58:43 LOG5 end_task: Level: (3) ID = <10136> Status = 1 0 0 1 failed 2009-Apr-16 19:58:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'FAILED' 2009-Apr-16 19:58:43 LOG5 end_task: Level: (2) ID = <10133> Status = 1 0 0 1 failed 2009-Apr-16 19:58:43 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-16 19:58:43 LOG5 finish_task: Level: (1) ID = <10105> Status = 1 0 0 1 failed 2009-Apr-16 19:58:43 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2009-Apr-16 19:58:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-16 19:58:43 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2009-Apr-16 19:58:43 LOG5 end_task: Level: (1) ID = <10105> Status = 1 0 0 1 failed 2009-Apr-16 19:58:43 LOG4 WAPP=1+2+4-start_spectra: Abort request received 2009-Apr-16 19:58:43 INFO1 WAPP=1+2+4-start_spectra: DONE with spectral line observation 2009-Apr-16 19:58:44 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 24 dumps! 2009-Apr-16 19:59:57 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-Apr-16 19:59:57 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-Apr-16 19:59:57 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2009-Apr-16 19:59:57 LOG3 vw_send: To DATATAKING: mvdata a2010 2009-Apr-16 19:59:57 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-Apr-16 19:59:57 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-Apr-16 19:59:57 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-Apr-16 19:59:57 NOTE CIMA-exit_cima: Cleaning up session ... 2009-Apr-16 19:59:58 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2009-Apr-16 19:59:58 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-Apr-16 19:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 19:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:00:00 LOG3 exec_msg: Closing socket 2009-Apr-16 20:00:28 BEGIN executive: CIMA executive starting ... 2009-Apr-16 20:00:29 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-16 20:00:29 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-16 20:00:29 INFO4 executive: This is an ON-LINE session 2009-Apr-16 20:00:29 INFO4 executive: This is a LOCAL session 2009-Apr-16 20:00:29 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-16 20:00:29 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2009-Apr-16 20:00:29 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090416' 2009-Apr-16 20:00:29 LOG2 log_preferences: Currently applied preferences: 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-16 20:00:29 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-16 20:00:29 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-16 20:00:29 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-16 20:00:30 ALERT executive: CIMA executive ready 2009-Apr-16 20:00:31 NOTE frontend: CIMA frontend ready 2009-Apr-16 20:00:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:00:33 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-16 20:00:34 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-16 20:00:34 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-16 20:00:34 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-16 20:00:34 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-16 20:00:34 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-16 20:00:34 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-16 20:00:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-16 20:00:34 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-16 20:00:34 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-16 20:00:34 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-16 20:00:34 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-16 20:00:34 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-16 20:00:34 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-16 20:00:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 20:00:34 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-16 20:00:34 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-16 20:00:37 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-16 20:00:37 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-16 20:00:37 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-16 20:00:37 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-16 20:00:37 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-16 20:00:37 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-16 20:00:37 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-16 20:00:37 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-16 20:00:37 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-16 20:00:37 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-16 20:00:39 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-16 20:00:39 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-16 20:00:39 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-16 20:00:39 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-16 20:00:39 LOG4 got_cormsg: From DATATAKING: 2009-Apr-16 20:00:39 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-16 20:00:40 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:00:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:00:40 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-16 20:00:40 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-16 20:00:40 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-16 20:00:40 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-16 20:00:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:00:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:00:56 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-16 20:00:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-16 20:00:58 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-16 20:00:58 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-16 20:00:58 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-16 20:00:58 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-16 20:00:58 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-16 20:00:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-16 20:00:59 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-16 20:00:59 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-16 20:00:59 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-16 20:00:59 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-16 20:00:59 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-16 20:00:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-16 20:00:59 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-16 20:00:59 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-16 20:00:59 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-16 20:00:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:00:59 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-16 20:00:59 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-16 20:00:59 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-16 20:00:59 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-16 20:00:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-16 20:00:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 20:00:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:00:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 20:00:59 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 20:00:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 20:00:59 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 20:00:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-16 20:00:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-16 20:00:59 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-16 20:00:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-16 20:00:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:00:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-16 20:00:59 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-16 20:00:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 20:01:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-16 20:01:15 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-16 20:01:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-16 20:01:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-16 20:01:15 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-16 20:01:15 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-16 20:01:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 20:01:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-16 20:01:15 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-16 20:01:16 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-16 20:01:16 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-16 20:01:16 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-16 20:01:16 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-16 20:01:16 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-16 20:01:16 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-16 20:01:16 START begin_task: Starting task 'selecting calibration port' 2009-Apr-16 20:01:16 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-16 20:01:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-16 20:01:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:16 START begin_task: Starting task 'waiting on calport' 2009-Apr-16 20:01:16 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-16 20:01:16 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-16 20:01:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 20:01:16 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-16 20:01:16 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-16 20:01:16 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-16 20:01:16 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 20:01:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 20:01:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 20:01:16 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 20:01:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 20:01:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 20:01:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 20:01:16 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-16 20:01:16 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-16 20:01:17 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-16 20:01:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 20:01:17 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-16 20:01:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 20:01:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 20:01:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 20:01:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 20:01:17 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:17 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-16 20:01:17 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-16 20:01:17 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-16 20:01:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 20:01:17 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-16 20:01:17 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-16 20:01:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 20:01:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-16 20:01:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-16 20:01:17 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-16 20:01:17 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-16 20:01:17 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-16 20:01:17 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-16 20:01:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-16 20:01:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-16 20:01:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-16 20:01:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-16 20:01:17 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-16 20:01:17 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-16 20:01:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 20:01:17 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-16 20:01:17 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-16 20:01:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 20:01:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20090416.a2010.0019.fits 2009-Apr-16 20:01:18 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090416.a2010.0019.fits} 2009-Apr-16 20:01:18 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-16 20:01:18 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-16 20:01:18 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-16 20:01:36 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2009-Apr-16 20:01:36 LOG4 exec_msg: From OBSERVER: new_file manual 2009-Apr-16 20:01:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 20:01:36 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20090416.a2010.0019.fits' is empty! 2009-Apr-16 20:01:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 20:01:38 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-16 20:01:38 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-16 20:01:38 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 20:01:38 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-16 20:01:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-16 20:01:38 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-16 20:01:38 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-16 20:01:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-16 20:01:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:38 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-16 20:01:38 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-16 20:01:38 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-16 20:01:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:41 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 20:01:41 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-16 20:01:41 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-16 20:01:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-16 20:01:41 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 20:01:41 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-16 20:01:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-16 20:01:41 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:41 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:41 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:41 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:41 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-16 20:01:41 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-16 20:01:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-16 20:01:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-16 20:01:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-16 20:01:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-16 20:01:41 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-16 20:01:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-16 20:01:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-16 20:01:41 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-16 20:01:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.028 1.060 ALFA beam 1: 1.011 1.001 2009-Apr-16 20:01:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.950 0.915 ALFA beam 3: 1.008 1.017 2009-Apr-16 20:01:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.004 1.080 ALFA beam 5: 0.999 1.084 2009-Apr-16 20:01:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.045 0.097 ALFA beam 7: 0.936 0.119 2009-Apr-16 20:01:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 20:01:41 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-16 20:01:41 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-16 20:01:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:01:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 20:01:41 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-16 20:01:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-16 20:01:42 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 20:01:42 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-16 20:01:42 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-16 20:01:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-16 20:01:42 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 20:01:42 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-16 20:01:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2009-Apr-16 20:01:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.060 1.011 1.001 2009-Apr-16 20:01:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.915 1.008 1.017 2009-Apr-16 20:01:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 1.080 0.999 1.084 2009-Apr-16 20:01:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.097 0.936 0.119 2009-Apr-16 20:01:43 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-16 20:01:43 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 091600.0 +221554 J 0 Topocentric velocity(optical) 2009-Apr-16 20:01:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 091600.0 +221554 J 0 Topocentric velocity(optical)' 2009-Apr-16 20:01:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-16 20:01:43 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-16 20:01:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift92p1' 2009-Apr-16 20:01:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-16 20:01:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift92p1} 2009-Apr-16 20:01:44 INFO5 fixed_driftmap: Start: year = 2009.2924969896317 RA = 09:16:33.4 Dec = +22:13:33.1 2009-Apr-16 20:01:44 NOTE fixed_driftmap: Setting ZA to 3:52:19.4 ... 2009-Apr-16 20:01:44 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 3.87 2009-Apr-16 20:01:44 LOG3 track_source: Calling 'track_source drift92p1 180.0 3.8720539450 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-16 20:01:44 START begin_task: Starting task 'sending tracking commands' 2009-Apr-16 20:01:44 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-16 20:01:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Slewing to source 'drift92p1' ...} 2009-Apr-16 20:01:44 INFO1 track_source: Starting to track drift92p1 2009-Apr-16 20:01:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p1" 2009-Apr-16 20:01:44 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-16 20:01:44 LOG3 vw_send: To DATATAKING: set dec 3.8720539450 2009-Apr-16 20:01:44 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-16 20:01:44 LOG3 vw_send: To DATATAKING: pnt tr 180.0 3.8720539450 -CF 2009-Apr-16 20:01:44 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-16 20:01:44 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-16 20:01:44 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-16 20:01:44 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-16 20:01:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:01:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-16 20:01:44 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-16 20:01:44 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-16 20:01:44 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-16 20:01:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-16 20:01:44 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-16 20:01:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-16 20:01:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-16 20:01:44 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-16 20:01:44 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p1" 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: set dec 3.8720539450 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: vw% 3.8720539450 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 3.8720539450 -CF 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-16 20:01:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-16 20:01:45 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-16 20:01:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-16 20:01:45 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-16 20:01:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-16 20:01:45 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-16 20:01:45 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-16 20:01:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-16 20:01:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:01:45 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-16 20:01:45 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-16 20:01:45 START begin_task: Starting task 'waiting on telescope' 2009-Apr-16 20:01:45 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-16 20:01:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-16 20:01:45 LOG3 waittrk: Start waittrk 5 2009-Apr-16 20:01:45 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-16 20:01:45 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-16 20:01:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-16 20:01:50 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-16 20:01:50 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-16 20:01:50 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-16 20:01:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-16 20:01:51 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-16 20:01:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-16 20:01:51 INFO2 waittrk: Now tracking drift92p1 2009-Apr-16 20:01:51 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 3.89 2009-Apr-16 20:01:51 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-16 20:01:51 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-16 20:01:51 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-16 20:01:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:01:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-16 20:01:51 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-16 20:01:51 START begin_task: Starting task 'selecting calibration type' 2009-Apr-16 20:01:51 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-16 20:01:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-16 20:01:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-16 20:01:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:51 START begin_task: Starting task 'waiting on setcal' 2009-Apr-16 20:01:51 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-16 20:01:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-16 20:01:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 20:01:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-16 20:01:52 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-16 20:01:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 20:01:52 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-16 20:01:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 20:01:52 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 20:01:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 20:01:52 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 20:01:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-16 20:01:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 20:01:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:01:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 20:01:52 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 20:01:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 20:01:52 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 20:01:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:01:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-16 20:01:52 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG5 dopset_later: Calling 'dopset_later 41.207890446535707' 2009-Apr-16 20:01:52 INFO3 dopset_later: Setting Doppler correction for 20:02:32 (41.2 seconds from now) 2009-Apr-16 20:01:52 LOG5 antvel: Calling 'antvel 180.000000 3.872054 F Topocentric 41.207890446535707' 2009-Apr-16 20:01:52 LOG2 antvel: Transforming current Az = 180.00 ZA = 3.87 to apparent RA = 09:16:33.3 Dec = +22:13:33.1 2009-Apr-16 20:01:52 LOG2 antvel: Parameters to Doppler: Topocentric 86552 2009 106 0.0 2009-Apr-16 20:01:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-16 20:01:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-16 20:01:52 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-16 20:01:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-16 20:01:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-16 20:01:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 20:01:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 20:01:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 20:01:52 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-16 20:01:52 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-16 20:01:52 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-16 20:01:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-16 20:01:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:52 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-16 20:01:52 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 20:01:52 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-16 20:01:52 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-16 20:01:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-16 20:01:52 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-16 20:01:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-16 20:01:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-16 20:01:52 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-16 20:01:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:01:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-16 20:01:53 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-16 20:01:53 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-16 20:01:53 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-16 20:01:53 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-16 20:01:53 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-16 20:01:53 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-16 20:01:53 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-16 20:01:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.025 1.058 ALFA beam 1: 1.009 0.997 2009-Apr-16 20:01:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.948 0.915 ALFA beam 3: 1.021 1.037 2009-Apr-16 20:01:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.017 1.104 ALFA beam 5: 1.001 1.099 2009-Apr-16 20:01:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.066 0.099 ALFA beam 7: 0.948 0.122 2009-Apr-16 20:01:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 20:01:53 LOG5 finish_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-16 20:01:53 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-16 20:01:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:01:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 20:01:53 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-16 20:01:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-16 20:01:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-16 20:01:53 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-16 20:01:53 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-16 20:01:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:01:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-16 20:01:53 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-16 20:01:53 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:16:33.4 LST = 09:15:54.1 diff = 39.3 secs 2009-Apr-16 20:01:53 INFO2 fixed_driftmap: Waiting 37.3 seconds for RA 9:16:33 2009-Apr-16 20:01:53 INFO2 lstwait: Waiting for 37.2 secs from LST 09:15:54 to LST 09:16:31 ... 2009-Apr-16 20:01:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 37.213626244613295 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-16 20:01:53 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-16 20:01:53 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-16 20:01:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:01:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.058 1.009 0.997 2009-Apr-16 20:01:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.915 1.021 1.037 2009-Apr-16 20:01:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.104 1.001 1.099 2009-Apr-16 20:01:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.099 0.948 0.122 2009-Apr-16 20:02:30 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-16 20:02:30 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-16 20:02:30 LOG4 lstwait: Finished waiting -0.21 seconds late 2009-Apr-16 20:02:30 INFO3 lstwait: Finished waiting 2009-Apr-16 20:02:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-16 20:02:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 20:02:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 20:02:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 20:02:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 20:02:31 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090416.a2010.0019.fits' is empty! 2009-Apr-16 20:02:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-16 20:02:31 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-16 20:02:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-16 20:02:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-16 20:02:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 20:02:31 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-16 20:02:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-16 20:02:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 20:02:31 INFO2 take_data: Starting WAPP 600-second scan: 910600168 2009-Apr-16 20:02:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 20:02:31 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-16 20:02:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 20:02:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 20:02:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-16 20:02:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 152.00 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 20:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 20:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:02:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:02:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 1.059 1.010 1.000 2009-Apr-16 20:02:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.913 1.022 1.035 2009-Apr-16 20:02:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.108 0.999 1.098 2009-Apr-16 20:02:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.947 0.122 2009-Apr-16 20:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:03:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:03:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.058 1.006 0.999 2009-Apr-16 20:03:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.913 1.022 1.032 2009-Apr-16 20:03:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.098 0.995 1.095 2009-Apr-16 20:03:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.099 0.942 0.122 2009-Apr-16 20:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:04:23 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:04:23.296 (seconds: 72263.296)!} 2009-Apr-16 20:04:23 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:04:23.296 (seconds: 72263.296)! 2009-Apr-16 20:04:24 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 72262.0 to 72263.0! 2009-Apr-16 20:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:04:25 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (72262.0 - 72264.0)! 2009-Apr-16 20:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:04:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:04:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.056 1.008 0.999 2009-Apr-16 20:04:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.910 1.021 1.035 2009-Apr-16 20:04:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.104 0.999 1.100 2009-Apr-16 20:04:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.099 0.944 0.122 2009-Apr-16 20:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:05:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:05:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.061 1.010 1.005 2009-Apr-16 20:05:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.913 1.024 1.037 2009-Apr-16 20:05:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.102 0.997 1.098 2009-Apr-16 20:05:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.948 0.122 2009-Apr-16 20:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.101 (still bad) 2009-Apr-16 20:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:07:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.065 1.009 1.003 2009-Apr-16 20:07:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.912 1.023 1.039 2009-Apr-16 20:07:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.104 1.003 1.107 2009-Apr-16 20:07:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.950 0.123 2009-Apr-16 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:08:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:08:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.070 1.016 1.008 2009-Apr-16 20:08:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.917 1.026 1.046 2009-Apr-16 20:08:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.105 1.004 1.106 2009-Apr-16 20:08:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.952 0.122 2009-Apr-16 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 20:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-16 20:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:09:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:09:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.063 1.007 1.000 2009-Apr-16 20:09:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.909 1.019 1.034 2009-Apr-16 20:09:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.093 0.996 1.096 2009-Apr-16 20:09:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.944 0.122 2009-Apr-16 20:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 20:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.100 (still bad) 2009-Apr-16 20:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2009-Apr-16 20:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:10:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.065 1.007 1.003 2009-Apr-16 20:10:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.910 1.019 1.037 2009-Apr-16 20:10:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.097 0.996 1.096 2009-Apr-16 20:10:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.099 0.946 0.122 2009-Apr-16 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:11:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:11:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.066 1.007 0.999 2009-Apr-16 20:11:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.907 1.023 1.036 2009-Apr-16 20:11:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.095 0.996 1.095 2009-Apr-16 20:11:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.945 0.122 2009-Apr-16 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-16 20:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:12:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:12:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.071 1.010 1.001 2009-Apr-16 20:12:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.908 1.022 1.038 2009-Apr-16 20:12:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.097 1.002 1.103 2009-Apr-16 20:12:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.947 0.123 2009-Apr-16 20:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:12:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 20:12:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-16 20:12:32 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-16 20:12:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-16 20:12:32 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-16 20:12:32 LOG1 fixed_driftmap: New position: year = 2009.2925175552007 RA = 09:26:02.4 RA/Dec = 09:26:35.6 +22:13:27.4 2009-Apr-16 20:12:32 NOTE fixed_driftmap: Correcting ZA to 3:52:13.7 ... 2009-Apr-16 20:12:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8704817008 -CF 2009-Apr-16 20:12:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-16 20:12:32 START begin_task: Starting task 'WAPP calibration' 2009-Apr-16 20:12:32 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-16 20:12:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-16 20:12:32 START begin_task: Starting task 'selecting calibration type' 2009-Apr-16 20:12:32 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-16 20:12:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-16 20:12:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-16 20:12:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:12:32 START begin_task: Starting task 'waiting on setcal' 2009-Apr-16 20:12:32 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-16 20:12:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8704817008 -CF 2009-Apr-16 20:12:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:12:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-16 20:12:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:12:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:12:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 20:12:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-16 20:12:32 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-16 20:12:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-16 20:12:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 20:12:33 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-16 20:12:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 20:12:33 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-16 20:12:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:12:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 20:12:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 20:12:34 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-16 20:12:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 20:12:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-16 20:12:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 20:12:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:12:34 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 20:12:34 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-16 20:12:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 20:12:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 20:12:34 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-16 20:12:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 20:12:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:12:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-16 20:12:34 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-16 20:12:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-16 20:12:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-16 20:12:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-16 20:12:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 20:12:34 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-16 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:12:34 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 20:12:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-16 20:12:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 20:12:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 20:12:34 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-16 20:12:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-16 20:12:34 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 20:12:34 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-16 20:12:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-16 20:12:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 20:12:34 INFO2 take_data: Starting WAPP 1-second scan: 910600169 2009-Apr-16 20:12:35 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 20:12:35 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-16 20:12:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 20:12:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-16 20:12:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 756.00 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 20:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 20:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.546 (still bad) 2009-Apr-16 20:12:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 20:12:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-16 20:12:37 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-16 20:12:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-16 20:12:37 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-16 20:12:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-16 20:12:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 20:12:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 20:12:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 20:12:37 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-16 20:12:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 20:12:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 20:12:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 20:12:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 20:12:37 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-16 20:12:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-16 20:12:37 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-16 20:12:37 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-16 20:12:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-16 20:12:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:12:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-16 20:12:37 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-16 20:12:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-16 20:12:37 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-16 20:12:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 20:12:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 20:12:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 20:12:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 20:12:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-16 20:12:38 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-16 20:12:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 20:12:38 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-16 20:12:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-16 20:12:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 20:12:38 INFO2 take_data: Starting WAPP 600-second scan: 910600170 2009-Apr-16 20:12:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 20:12:38 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-16 20:12:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 20:12:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 20:12:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-16 20:12:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 759.00 2009-Apr-16 20:12:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20090416.a2010.0020.fits 2009-Apr-16 20:12:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090416.a2010.0020.fits} 2009-Apr-16 20:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.546 (still bad) 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 20:12:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 20:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:13:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:13:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.065 1.007 1.000 2009-Apr-16 20:13:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.908 1.021 1.038 2009-Apr-16 20:13:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.096 0.999 1.097 2009-Apr-16 20:13:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.099 0.947 0.122 2009-Apr-16 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-16 20:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-16 20:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-16 20:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-16 20:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:14:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:14:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.070 1.009 1.002 2009-Apr-16 20:14:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.906 1.019 1.040 2009-Apr-16 20:14:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.101 1.000 1.099 2009-Apr-16 20:14:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.099 0.958 0.123 2009-Apr-16 20:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:15:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:15:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.068 1.008 1.003 2009-Apr-16 20:15:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.910 1.020 1.038 2009-Apr-16 20:15:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.097 1.001 1.097 2009-Apr-16 20:15:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.099 0.949 0.123 2009-Apr-16 20:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:16:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:16:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 1.075 1.017 1.011 2009-Apr-16 20:16:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.916 1.027 1.046 2009-Apr-16 20:16:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.107 1.007 1.107 2009-Apr-16 20:16:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.100 0.959 0.123 2009-Apr-16 20:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-16 20:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:17:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:17:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.069 1.011 1.003 2009-Apr-16 20:17:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.909 1.020 1.038 2009-Apr-16 20:17:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.101 0.998 1.100 2009-Apr-16 20:17:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.099 0.950 0.123 2009-Apr-16 20:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:17:30 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 54938.012130 to 54938.012141! 2009-Apr-16 20:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:31 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (54938.012130 - 54938.012153)! 2009-Apr-16 20:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:18:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.075 1.011 1.003 2009-Apr-16 20:18:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.910 1.023 1.043 2009-Apr-16 20:18:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.103 1.001 1.102 2009-Apr-16 20:18:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.099 0.950 0.123 2009-Apr-16 20:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-16 20:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Apr-16 20:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-16 20:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:19:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:19:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.067 1.011 1.003 2009-Apr-16 20:19:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.910 1.024 1.048 2009-Apr-16 20:19:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.098 1.002 1.099 2009-Apr-16 20:19:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.099 0.949 0.123 2009-Apr-16 20:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Apr-16 20:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:19:22 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:19:22.296 (seconds: 73162.296)!} 2009-Apr-16 20:19:22 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:19:22.296 (seconds: 73162.296)! 2009-Apr-16 20:19:23 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 73161.0 to 73162.0! 2009-Apr-16 20:19:24 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (73161.0 - 73163.0)! 2009-Apr-16 20:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-16 20:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-16 20:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-16 20:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-16 20:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-16 20:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 20:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-16 20:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:20:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-16 20:20:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.069 1.009 1.004 2009-Apr-16 20:20:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.909 1.021 1.041 2009-Apr-16 20:20:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.102 1.002 1.104 2009-Apr-16 20:20:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.947 0.123 2009-Apr-16 20:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-16 20:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:21:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:21:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.072 1.010 1.003 2009-Apr-16 20:21:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.921 1.021 1.043 2009-Apr-16 20:21:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.103 1.000 1.102 2009-Apr-16 20:21:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.100 0.949 0.123 2009-Apr-16 20:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 20:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-16 20:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-16 20:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-16 20:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-16 20:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 20:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-16 20:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-16 20:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:22:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:22:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.070 1.014 1.006 2009-Apr-16 20:22:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.913 1.022 1.042 2009-Apr-16 20:22:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.105 1.002 1.107 2009-Apr-16 20:22:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.100 0.954 0.123 2009-Apr-16 20:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:22:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 20:22:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-16 20:22:39 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-16 20:22:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-16 20:22:39 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-16 20:22:39 LOG1 fixed_driftmap: New position: year = 2009.2925367898702 RA = 09:36:11.2 RA/Dec = 09:36:44.3 +22:13:22.0 2009-Apr-16 20:22:39 NOTE fixed_driftmap: Correcting ZA to 3:52:08.3 ... 2009-Apr-16 20:22:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.8689684240 -CF 2009-Apr-16 20:22:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-16 20:22:39 START begin_task: Starting task 'WAPP calibration' 2009-Apr-16 20:22:39 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-16 20:22:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-16 20:22:39 START begin_task: Starting task 'selecting calibration type' 2009-Apr-16 20:22:39 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-16 20:22:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-16 20:22:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-16 20:22:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:22:39 START begin_task: Starting task 'waiting on setcal' 2009-Apr-16 20:22:39 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-16 20:22:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.8689684240 -CF 2009-Apr-16 20:22:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:22:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-16 20:22:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-16 20:22:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:22:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-16 20:22:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-16 20:22:39 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-16 20:22:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 20:22:40 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-16 20:22:40 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 20:22:40 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-16 20:22:40 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 20:22:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 20:22:40 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 20:22:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-16 20:22:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-16 20:22:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:22:40 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-16 20:22:40 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-16 20:22:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-16 20:22:40 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-16 20:22:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-16 20:22:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-16 20:22:40 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-16 20:22:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-16 20:22:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-16 20:22:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 20:22:40 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 20:22:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-16 20:22:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 20:22:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 20:22:40 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-16 20:22:40 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 20:22:40 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-16 20:22:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 20:22:40 INFO2 take_data: Starting WAPP 1-second scan: 910600171 2009-Apr-16 20:22:40 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 20:22:40 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-16 20:22:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 20:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:22:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-16 20:22:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1361.00 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 20:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 20:22:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-16 20:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2009-Apr-16 20:22:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-16 20:22:42 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-16 20:22:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-16 20:22:42 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-16 20:22:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-16 20:22:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-16 20:22:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-16 20:22:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-16 20:22:42 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-16 20:22:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-16 20:22:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-16 20:22:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-16 20:22:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-16 20:22:42 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-16 20:22:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-16 20:22:42 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-16 20:22:42 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-16 20:22:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-16 20:22:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-16 20:22:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-16 20:22:42 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-16 20:22:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-16 20:22:42 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-16 20:22:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-16 20:22:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-16 20:22:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-16 20:22:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-16 20:22:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-16 20:22:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-16 20:22:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-16 20:22:43 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-16 20:22:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-16 20:22:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-16 20:22:43 INFO2 take_data: Starting WAPP 600-second scan: 910600172 2009-Apr-16 20:22:43 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-16 20:22:43 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-16 20:22:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-16 20:22:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-16 20:22:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-16 20:22:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1364.00 2009-Apr-16 20:22:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20090416.a2010.0021.fits 2009-Apr-16 20:22:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090416.a2010.0021.fits} 2009-Apr-16 20:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770095 MHz 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604053 MHz 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647028 MHz 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1875.000000 MHz 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2009-Apr-16 20:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Apr-16 20:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-16 20:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-16 20:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-16 20:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-16 20:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-16 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-16 20:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:23:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:23:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.075 1.014 1.005 2009-Apr-16 20:23:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.915 1.026 1.044 2009-Apr-16 20:23:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.104 1.002 1.106 2009-Apr-16 20:23:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.100 0.951 0.123 2009-Apr-16 20:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:24:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.072 1.011 1.006 2009-Apr-16 20:24:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.916 1.019 1.041 2009-Apr-16 20:24:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.100 1.003 1.105 2009-Apr-16 20:24:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.951 0.123 2009-Apr-16 20:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-16 20:25:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:25:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.076 1.010 1.005 2009-Apr-16 20:25:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.913 1.019 1.043 2009-Apr-16 20:25:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.103 1.003 1.105 2009-Apr-16 20:25:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.952 0.123 2009-Apr-16 20:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-16 20:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-16 20:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-16 20:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-16 20:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-16 20:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-16 20:26:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:26:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.069 1.012 1.008 2009-Apr-16 20:26:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.916 1.022 1.046 2009-Apr-16 20:26:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.104 1.003 1.102 2009-Apr-16 20:26:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.100 0.958 0.123 2009-Apr-16 20:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-16 20:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-16 20:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-16 20:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-16 20:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:27:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:27:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.075 1.015 1.010 2009-Apr-16 20:27:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.915 1.024 1.053 2009-Apr-16 20:27:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.107 1.005 1.105 2009-Apr-16 20:27:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.100 0.963 0.123 2009-Apr-16 20:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:28:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:28:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.075 1.013 1.010 2009-Apr-16 20:28:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.913 1.023 1.053 2009-Apr-16 20:28:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.107 1.007 1.108 2009-Apr-16 20:28:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.100 0.961 0.123 2009-Apr-16 20:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-16 20:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2009-Apr-16 20:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-16 20:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-16 20:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-16 20:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-16 20:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-16 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-16 20:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:29:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-16 20:29:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.071 1.016 1.010 2009-Apr-16 20:29:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.914 1.024 1.060 2009-Apr-16 20:29:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.106 1.004 1.109 2009-Apr-16 20:29:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.100 0.962 0.124 2009-Apr-16 20:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-16 20:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-16 20:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-16 20:29:39 IN