2009-Apr-14 19:47:12 BEGIN executive: CIMA executive starting ... 2009-Apr-14 19:47:12 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-14 19:47:12 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-14 19:47:12 INFO4 executive: This is an ON-LINE session 2009-Apr-14 19:47:12 INFO4 executive: This is a REMOTE session 2009-Apr-14 19:47:12 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-14 19:47:13 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Drew Brisbin' 2009-Apr-14 19:47:13 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090414' 2009-Apr-14 19:47:13 LOG2 log_preferences: Currently applied preferences: 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-14 19:47:13 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-14 19:47:13 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-14 19:47:13 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-14 19:47:14 ALERT executive: CIMA executive ready 2009-Apr-14 19:47:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:47:16 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-14 19:47:17 NOTE frontend: CIMA frontend ready 2009-Apr-14 19:47:22 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-14 19:47:22 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-14 19:47:22 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-14 19:47:22 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-14 19:47:22 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-14 19:47:22 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-14 19:47:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-14 19:47:22 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-14 19:47:22 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-14 19:47:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-14 19:47:22 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-14 19:47:22 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-14 19:47:22 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-14 19:47:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:47:22 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-14 19:47:22 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-14 19:47:23 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-14 19:47:23 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:47:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:47:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:47:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:47:32 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-14 19:47:32 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-14 19:47:32 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-14 19:47:32 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-14 19:47:32 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-14 19:47:32 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-14 19:47:32 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-14 19:47:32 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-14 19:47:32 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-14 19:47:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-14 19:47:36 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-14 19:47:36 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-14 19:47:36 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-14 19:47:36 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-14 19:48:23 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-14 19:48:28 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-14 19:48:28 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-14 19:48:28 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-14 19:48:28 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-14 19:48:28 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-14 19:48:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-14 19:48:28 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-14 19:48:28 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-14 19:48:28 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-14 19:48:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-14 19:48:28 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-14 19:48:28 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-14 19:48:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-14 19:48:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-14 19:48:30 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-14 19:48:30 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-14 19:48:30 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-14 19:48:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-14 19:48:30 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-14 19:48:30 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-14 19:48:30 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-14 19:48:30 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-14 19:48:30 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-14 19:48:30 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-14 19:48:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-14 19:48:30 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-14 19:48:30 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-14 19:48:30 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-14 19:48:30 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-14 19:48:30 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-14 19:48:30 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-14 19:48:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:48:30 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-14 19:48:30 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-14 19:48:30 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-14 19:48:30 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-14 19:48:30 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-14 19:48:30 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-14 19:48:30 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-14 19:48:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-14 19:48:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 19:48:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:48:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 19:48:31 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-14 19:48:31 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-14 19:48:31 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-14 19:48:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 19:48:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 19:48:31 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-14 19:48:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 19:48:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-14 19:48:31 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-14 19:48:31 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-14 19:48:32 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-14 19:48:32 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-14 19:48:32 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-14 19:48:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-14 19:48:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:48:32 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-14 19:48:32 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-14 19:48:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:48:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-14 19:48:47 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-14 19:48:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-14 19:48:47 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-14 19:48:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:48:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-14 19:48:47 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-14 19:48:47 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-14 19:48:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-14 19:48:47 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-14 19:48:47 START begin_task: Starting task 'selecting calibration port' 2009-Apr-14 19:48:47 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-14 19:48:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-14 19:48:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:48:47 START begin_task: Starting task 'waiting on calport' 2009-Apr-14 19:48:47 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:48:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-14 19:48:47 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-14 19:48:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-14 19:48:47 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 19:48:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 19:48:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:48:47 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:48:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 19:48:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:48:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:48:47 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-14 19:48:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-14 19:48:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:48:48 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:48:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 19:48:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:48:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:48:48 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:48:48 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-14 19:48:48 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-14 19:48:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:48:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-14 19:48:48 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-14 19:48:48 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-14 19:48:48 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-14 19:48:48 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-14 19:48:48 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-14 19:48:48 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-14 19:48:48 LOG3 track_source: Calling 'track_source galfasrc 085500.0 +224506 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-14 19:48:48 START begin_task: Starting task 'sending tracking commands' 2009-Apr-14 19:48:48 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-14 19:48:48 INFO1 track_source: Starting to track galfasrc 2009-Apr-14 19:48:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-14 19:48:48 LOG3 vw_send: To DATATAKING: set ra 085500.0 2009-Apr-14 19:48:48 LOG3 vw_send: To DATATAKING: set dec +224506 2009-Apr-14 19:48:48 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-14 19:48:48 LOG3 vw_send: To DATATAKING: pnt tr 085500.0 +224506 -CJ 2009-Apr-14 19:48:48 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-14 19:48:48 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-14 19:48:48 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-14 19:48:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:48:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-14 19:48:48 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-14 19:48:48 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-14 19:48:48 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-14 19:48:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:48:48 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-14 19:48:48 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-14 19:48:49 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-14 19:48:49 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-14 19:48:49 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-14 19:48:49 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-14 19:48:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-14 19:48:49 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-14 19:48:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-14 19:48:49 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-14 19:48:49 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-14 19:48:49 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-14 19:48:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 19:48:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20090414.a2010.0017.fits 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-14 19:48:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-14 19:48:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-14 19:48:49 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090414.a2010.0017.fits} 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: set ra 085500.0 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: set dec +224506 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: vw% 085500.0 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: vw% +224506 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: pnt tr 085500.0 +224506 -CJ 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-14 19:48:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:48:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 19:49:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-14 19:49:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-14 19:49:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-14 19:49:21 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-14 19:49:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-14 19:49:21 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-14 19:49:21 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-14 19:49:21 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-14 19:49:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:49:21 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-14 19:49:21 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-14 19:49:21 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-14 19:49:21 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-14 19:49:21 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-14 19:49:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-14 19:49:21 LOG3 waittrk: Start waittrk 5 2009-Apr-14 19:49:21 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-14 19:49:21 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-14 19:49:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-14 19:49:26 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-14 19:49:26 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-14 19:49:26 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-14 19:49:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-14 19:49:26 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-14 19:49:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-14 19:49:26 INFO2 waittrk: Now tracking galfasrc 2009-Apr-14 19:49:26 LOG4 waittrk: Current telescope position: Az = 179.78 ZA = 4.38 2009-Apr-14 19:49:26 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-14 19:49:26 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-14 19:49:26 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-14 19:49:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:49:26 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-14 19:49:26 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-14 19:49:26 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-14 19:49:26 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-14 19:49:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-14 19:49:27 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-14 19:49:27 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-14 19:49:27 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-14 19:49:27 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-14 19:49:27 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-14 19:49:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-14 19:49:27 START begin_task: Starting task 'selecting calibration type' 2009-Apr-14 19:49:27 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-14 19:49:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-14 19:49:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-14 19:49:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:49:27 START begin_task: Starting task 'waiting on setcal' 2009-Apr-14 19:49:27 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-14 19:49:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-14 19:49:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:49:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:49:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-14 19:49:27 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-14 19:49:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-14 19:49:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 19:49:27 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-14 19:49:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 19:49:27 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-14 19:49:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 19:49:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 19:49:28 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-14 19:49:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 19:49:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-14 19:49:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 19:49:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:49:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 19:49:28 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-14 19:49:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 19:49:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 19:49:28 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-14 19:49:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 19:49:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:49:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-14 19:49:28 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-14 19:49:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:49:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:49:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:49:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:49:28 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090414.a2010.0017.fits' is empty! 2009-Apr-14 19:49:28 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-14 19:49:28 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-14 19:49:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-14 19:49:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 19:49:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 19:49:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:49:28 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-14 19:49:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:49:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 19:49:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:49:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:49:28 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-14 19:49:28 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-14 19:49:28 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 19:49:28 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-14 19:49:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-14 19:49:29 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-14 19:49:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-14 19:49:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-14 19:49:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:49:29 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-14 19:49:29 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-14 19:49:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-14 19:49:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:49:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 19:49:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:49:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-14 19:49:31 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-14 19:49:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-14 19:49:31 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 19:49:31 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-14 19:49:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-14 19:49:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:49:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:49:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:49:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:49:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-14 19:49:32 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-14 19:49:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-14 19:49:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:32 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-14 19:49:32 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-14 19:49:32 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-14 19:49:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-14 19:49:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-14 19:49:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-14 19:49:32 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-14 19:49:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.975 1.045 ALFA beam 1: 0.994 1.013 2009-Apr-14 19:49:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.937 0.907 ALFA beam 3: 0.988 1.064 2009-Apr-14 19:49:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.992 1.071 ALFA beam 5: 0.979 0.951 2009-Apr-14 19:49:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.036 0.099 ALFA beam 7: 0.929 0.122 2009-Apr-14 19:49:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 19:49:32 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-14 19:49:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-14 19:49:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:49:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 19:49:32 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-14 19:49:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-14 19:49:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 19:49:32 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-14 19:49:32 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-14 19:49:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:49:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 19:49:32 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-14 19:49:32 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-14 19:49:32 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-14 19:49:32 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-14 19:49:32 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:49:32 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:49:32 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:49:32 LOG2 antvel: Parameters to Doppler: Topocentric 85772 2009 104 0.0 2009-Apr-14 19:49:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:49:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-14 19:49:32 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-14 19:49:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:49:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:49:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:49:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:49:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-14 19:49:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:49:33 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-14 19:49:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-14 19:49:33 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.927204 2009.2869981240651 18.999933 2009-Apr-14 19:49:33 LOG4 log_alfabeam: ALFABEAM 0 8.916666666667364 22.751666666666669 2009-Apr-14 19:49:33 LOG4 log_alfabeam: ALFABEAM 1 8.917940303761270 22.647024003762315 2009-Apr-14 19:49:33 LOG4 log_alfabeam: ALFABEAM 2 8.922877721683440 22.716563090457008 2009-Apr-14 19:49:33 LOG4 log_alfabeam: ALFABEAM 3 8.921706647806104 22.821482449726048 2009-Apr-14 19:49:33 LOG4 log_alfabeam: ALFABEAM 4 8.915330648144066 22.856232489139593 2009-Apr-14 19:49:33 LOG4 log_alfabeam: ALFABEAM 5 8.910353913289967 22.784998403345160 2009-Apr-14 19:49:33 LOG4 log_alfabeam: ALFABEAM 6 8.911791941868787 22.680740486212375 2009-Apr-14 19:49:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400200 2009-Apr-14 19:49:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:49:33 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-14 19:49:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:49:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:49:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:49:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-14 19:49:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85774.00 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:49:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 19:49:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 1.079 1.028 1.035 2009-Apr-14 19:49:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.907 0.988 1.064 2009-Apr-14 19:49:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 1.071 0.979 0.951 2009-Apr-14 19:49:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.102 0.954 0.126 2009-Apr-14 19:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 19:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 19:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 19:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 19:49:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:49:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:49:44 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-14 19:49:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:49:44 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-14 19:49:44 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-14 19:49:44 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-14 19:49:44 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-14 19:49:44 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:49:44 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:49:44 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:49:44 LOG2 antvel: Parameters to Doppler: Topocentric 85784 2009 104 0.0 2009-Apr-14 19:49:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:49:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-14 19:49:44 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-14 19:49:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:49:44 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:49:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:49:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:49:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-14 19:49:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:49:44 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-14 19:49:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-14 19:49:44 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.930547 2009.2869985043224 18.999933 2009-Apr-14 19:49:44 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666933 22.751666666666669 2009-Apr-14 19:49:44 LOG4 log_alfabeam: ALFABEAM 1 8.918022776599376 22.647222631417325 2009-Apr-14 19:49:44 LOG4 log_alfabeam: ALFABEAM 2 8.922905082982547 22.717503487460764 2009-Apr-14 19:49:44 LOG4 log_alfabeam: ALFABEAM 3 8.921651209456895 22.822239658400967 2009-Apr-14 19:49:44 LOG4 log_alfabeam: ALFABEAM 4 8.915248122266117 22.856024443081516 2009-Apr-14 19:49:44 LOG4 log_alfabeam: ALFABEAM 5 8.910327998089711 22.784042947006657 2009-Apr-14 19:49:44 LOG4 log_alfabeam: ALFABEAM 6 8.911848197893232 22.680008422371465 2009-Apr-14 19:49:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400201 2009-Apr-14 19:49:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:49:45 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-14 19:49:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:49:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:49:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 19:49:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-14 19:49:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85786.00 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 19:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 19:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 19:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 19:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 19:49:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:49:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:49:56 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-14 19:49:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:49:56 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-14 19:49:56 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-14 19:49:56 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-14 19:49:56 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-14 19:49:56 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:49:56 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:49:56 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:49:56 LOG2 antvel: Parameters to Doppler: Topocentric 85796 2009 104 0.0 2009-Apr-14 19:49:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:49:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-14 19:49:56 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-14 19:49:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:49:56 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:49:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:49:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:49:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-14 19:49:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:49:56 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-14 19:49:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-14 19:49:56 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.933889 2009.2869988845794 18.999933 2009-Apr-14 19:49:56 LOG4 log_alfabeam: ALFABEAM 0 8.916666666667107 22.751666666666679 2009-Apr-14 19:49:56 LOG4 log_alfabeam: ALFABEAM 1 8.918105039473792 22.647433573138859 2009-Apr-14 19:49:56 LOG4 log_alfabeam: ALFABEAM 2 8.922931689793495 22.718447462291248 2009-Apr-14 19:49:56 LOG4 log_alfabeam: ALFABEAM 3 8.921595202001292 22.822988036195994 2009-Apr-14 19:49:56 LOG4 log_alfabeam: ALFABEAM 4 8.915165821564177 22.855804093322327 2009-Apr-14 19:49:56 LOG4 log_alfabeam: ALFABEAM 5 8.910302860317088 22.783084345973492 2009-Apr-14 19:49:56 LOG4 log_alfabeam: ALFABEAM 6 8.911904981896356 22.679285411774948 2009-Apr-14 19:49:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400202 2009-Apr-14 19:49:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:49:57 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-14 19:49:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:49:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:49:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:49:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:49:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-14 19:49:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85798.00 2009-Apr-14 19:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 19:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 19:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 19:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 19:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 19:50:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:50:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:50:08 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-14 19:50:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:50:08 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-14 19:50:08 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-14 19:50:08 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-14 19:50:08 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-14 19:50:08 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:50:08 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:50:08 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:50:08 LOG2 antvel: Parameters to Doppler: Topocentric 85808 2009 104 0.0 2009-Apr-14 19:50:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:50:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-14 19:50:08 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-14 19:50:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:50:08 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:50:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:50:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-14 19:50:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:50:08 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-14 19:50:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-14 19:50:08 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.937232 2009.2869992648364 18.999933 2009-Apr-14 19:50:08 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666753 22.751666666666676 2009-Apr-14 19:50:08 LOG4 log_alfabeam: ALFABEAM 1 8.918187113304432 22.647656866906893 2009-Apr-14 19:50:08 LOG4 log_alfabeam: ALFABEAM 2 8.922957549548824 22.719395249490955 2009-Apr-14 19:50:08 LOG4 log_alfabeam: ALFABEAM 3 8.921538612056942 22.823727778286965 2009-Apr-14 19:50:08 LOG4 log_alfabeam: ALFABEAM 4 8.915083725099947 22.855571402786403 2009-Apr-14 19:50:08 LOG4 log_alfabeam: ALFABEAM 5 8.910278492361879 22.782122366540335 2009-Apr-14 19:50:08 LOG4 log_alfabeam: ALFABEAM 6 8.911962307282757 22.678571256469215 2009-Apr-14 19:50:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400203 2009-Apr-14 19:50:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:50:09 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-14 19:50:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:50:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:50:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-14 19:50:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85810.00 2009-Apr-14 19:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 19:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 19:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 19:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 19:50:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 19:50:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:50:20 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-14 19:50:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:50:20 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-14 19:50:20 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-14 19:50:20 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-14 19:50:20 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-14 19:50:20 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:50:20 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:50:20 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:50:20 LOG2 antvel: Parameters to Doppler: Topocentric 85820 2009 104 0.0 2009-Apr-14 19:50:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:50:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-14 19:50:20 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-14 19:50:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:50:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:50:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:50:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-14 19:50:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:50:20 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-14 19:50:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-14 19:50:20 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.940574 2009.2869996450934 18.999933 2009-Apr-14 19:50:20 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666675 22.751666666666669 2009-Apr-14 19:50:20 LOG4 log_alfabeam: ALFABEAM 1 8.918268920960092 22.647892278415782 2009-Apr-14 19:50:20 LOG4 log_alfabeam: ALFABEAM 2 8.922982639084474 22.720345948652287 2009-Apr-14 19:50:20 LOG4 log_alfabeam: ALFABEAM 3 8.921481494108452 22.824458199044734 2009-Apr-14 19:50:20 LOG4 log_alfabeam: ALFABEAM 4 8.915001910005099 22.855326617898459 2009-Apr-14 19:50:20 LOG4 log_alfabeam: ALFABEAM 5 8.910254915416234 22.781157926562411 2009-Apr-14 19:50:20 LOG4 log_alfabeam: ALFABEAM 6 8.912020118689430 22.677866608570771 2009-Apr-14 19:50:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400204 2009-Apr-14 19:50:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:50:21 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-14 19:50:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:50:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:50:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-14 19:50:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85822.00 2009-Apr-14 19:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 19:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 19:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-14 19:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 19:50:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:50:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:50:32 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-14 19:50:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:50:32 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-14 19:50:32 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-14 19:50:32 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-14 19:50:32 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-14 19:50:32 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:50:32 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:50:32 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:50:32 LOG2 antvel: Parameters to Doppler: Topocentric 85832 2009 104 0.0 2009-Apr-14 19:50:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:50:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-14 19:50:32 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-14 19:50:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:50:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:50:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:50:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-14 19:50:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:50:32 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-14 19:50:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-14 19:50:32 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.943917 2009.2870000253504 18.999933 2009-Apr-14 19:50:32 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666638 22.751666666666665 2009-Apr-14 19:50:32 LOG4 log_alfabeam: ALFABEAM 1 8.918350483671043 22.648139835504619 2009-Apr-14 19:50:32 LOG4 log_alfabeam: ALFABEAM 2 8.923006966516178 22.721299792649962 2009-Apr-14 19:50:32 LOG4 log_alfabeam: ALFABEAM 3 8.921423835140514 22.825179502338049 2009-Apr-14 19:50:32 LOG4 log_alfabeam: ALFABEAM 4 8.914920355008844 22.855069711660821 2009-Apr-14 19:50:32 LOG4 log_alfabeam: ALFABEAM 5 8.910232121161282 22.780190793254459 2009-Apr-14 19:50:32 LOG4 log_alfabeam: ALFABEAM 6 8.912078429179624 22.677171261212443 2009-Apr-14 19:50:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400205 2009-Apr-14 19:50:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:50:33 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-14 19:50:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:50:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 19:50:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-14 19:50:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85834.00 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 19:50:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-14 19:50:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.045 0.989 1.014 2009-Apr-14 19:50:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.906 0.994 1.081 2009-Apr-14 19:50:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 1.090 0.972 0.959 2009-Apr-14 19:50:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.101 0.939 0.125 2009-Apr-14 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.089 (still bad) 2009-Apr-14 19:50:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:50:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:50:44 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-14 19:50:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:50:44 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-14 19:50:44 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-14 19:50:44 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-14 19:50:44 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-14 19:50:44 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:50:44 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:50:44 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:50:44 LOG2 antvel: Parameters to Doppler: Topocentric 85844 2009 104 0.0 2009-Apr-14 19:50:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:50:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-14 19:50:44 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-14 19:50:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:50:44 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:50:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:50:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-14 19:50:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:50:44 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-14 19:50:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-14 19:50:44 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.947259 2009.2870004056076 18.999933 2009-Apr-14 19:50:44 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666924 22.751666666666669 2009-Apr-14 19:50:44 LOG4 log_alfabeam: ALFABEAM 1 8.918431725285897 22.648399265041778 2009-Apr-14 19:50:44 LOG4 log_alfabeam: ALFABEAM 2 8.923030511199782 22.722255872939328 2009-Apr-14 19:50:44 LOG4 log_alfabeam: ALFABEAM 3 8.921365691286097 22.825891033758698 2009-Apr-14 19:50:44 LOG4 log_alfabeam: ALFABEAM 4 8.914839136201833 22.854800969182627 2009-Apr-14 19:50:44 LOG4 log_alfabeam: ALFABEAM 5 8.910210128192238 22.779221890756855 2009-Apr-14 19:50:44 LOG4 log_alfabeam: ALFABEAM 6 8.912137181924447 22.676485834692688 2009-Apr-14 19:50:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400206 2009-Apr-14 19:50:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:50:45 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-14 19:50:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:50:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:50:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 19:50:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-14 19:50:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85846.00 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 19:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:50:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:50:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:50:56 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-14 19:50:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:50:56 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-14 19:50:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-14 19:50:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-14 19:50:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-14 19:50:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:50:56 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-14 19:50:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:50:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-14 19:50:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:50:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:50:56 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-14 19:50:56 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-14 19:50:56 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-14 19:50:56 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-14 19:50:56 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:50:56 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:50:56 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:50:56 LOG2 antvel: Parameters to Doppler: Topocentric 85856 2009 104 0.0 2009-Apr-14 19:50:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:50:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-14 19:50:56 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-14 19:50:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:50:56 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:50:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:50:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-14 19:50:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:50:56 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-14 19:50:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-14 19:50:56 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.950602 2009.2870007858646 18.999933 2009-Apr-14 19:50:56 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666712 22.751666666666669 2009-Apr-14 19:50:56 LOG4 log_alfabeam: ALFABEAM 1 8.918512667462776 22.648670585452557 2009-Apr-14 19:50:56 LOG4 log_alfabeam: ALFABEAM 2 8.923053281947924 22.723214422284833 2009-Apr-14 19:50:56 LOG4 log_alfabeam: ALFABEAM 3 8.921307049832196 22.826593006765471 2009-Apr-14 19:50:56 LOG4 log_alfabeam: ALFABEAM 4 8.914758231861999 22.854520372773759 2009-Apr-14 19:50:56 LOG4 log_alfabeam: ALFABEAM 5 8.910188927472353 22.778250985601975 2009-Apr-14 19:50:56 LOG4 log_alfabeam: ALFABEAM 6 8.912196389752937 22.675810112463321 2009-Apr-14 19:50:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400207 2009-Apr-14 19:50:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:50:57 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-14 19:50:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:50:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:50:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:50:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-14 19:50:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85858.00 2009-Apr-14 19:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.087 (still bad) 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.087 (still bad) 2009-Apr-14 19:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.557 (still bad) 2009-Apr-14 19:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.556 (still bad) 2009-Apr-14 19:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-14 19:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.556 (still bad) 2009-Apr-14 19:51:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:51:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:51:08 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-14 19:51:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:51:08 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-14 19:51:08 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-14 19:51:08 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-14 19:51:08 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-14 19:51:08 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:51:08 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:51:08 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:51:08 LOG2 antvel: Parameters to Doppler: Topocentric 85868 2009 104 0.0 2009-Apr-14 19:51:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:51:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-14 19:51:08 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-14 19:51:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:51:08 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:51:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:51:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-14 19:51:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:51:08 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-14 19:51:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-14 19:51:08 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.953944 2009.2870011661216 18.999933 2009-Apr-14 19:51:08 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666696 22.751666666666665 2009-Apr-14 19:51:08 LOG4 log_alfabeam: ALFABEAM 1 8.918593235277298 22.648953486208359 2009-Apr-14 19:51:08 LOG4 log_alfabeam: ALFABEAM 2 8.923075260679232 22.724174527184861 2009-Apr-14 19:51:08 LOG4 log_alfabeam: ALFABEAM 3 8.921247968335285 22.827284800033418 2009-Apr-14 19:51:08 LOG4 log_alfabeam: ALFABEAM 4 8.914677716795138 22.854228244726187 2009-Apr-14 19:51:08 LOG4 log_alfabeam: ALFABEAM 5 8.910168534974485 22.777279004961741 2009-Apr-14 19:51:08 LOG4 log_alfabeam: ALFABEAM 6 8.912255994584914 22.675144681361115 2009-Apr-14 19:51:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400208 2009-Apr-14 19:51:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:51:09 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-14 19:51:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:51:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:51:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-14 19:51:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85870.00 2009-Apr-14 19:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.561 (still bad) 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.561 (still bad) 2009-Apr-14 19:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.557 (still bad) 2009-Apr-14 19:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.556 (still bad) 2009-Apr-14 19:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-14 19:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.557 (still bad) 2009-Apr-14 19:51:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:51:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:51:20 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-14 19:51:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:51:20 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-14 19:51:20 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-14 19:51:20 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-14 19:51:20 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-14 19:51:20 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:51:20 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:51:20 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:51:20 LOG2 antvel: Parameters to Doppler: Topocentric 85880 2009 104 0.0 2009-Apr-14 19:51:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:51:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-14 19:51:20 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-14 19:51:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:51:20 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:51:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:51:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-14 19:51:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:51:20 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-14 19:51:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-14 19:51:20 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.957287 2009.2870015463786 18.999933 2009-Apr-14 19:51:20 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666776 22.751666666666669 2009-Apr-14 19:51:20 LOG4 log_alfabeam: ALFABEAM 1 8.918673450926621 22.649247977251004 2009-Apr-14 19:51:20 LOG4 log_alfabeam: ALFABEAM 2 8.923096456906519 22.725136421855694 2009-Apr-14 19:51:20 LOG4 log_alfabeam: ALFABEAM 3 8.921188434275169 22.827966637303760 2009-Apr-14 19:51:20 LOG4 log_alfabeam: ALFABEAM 4 8.914597568718740 22.853924575686669 2009-Apr-14 19:51:20 LOG4 log_alfabeam: ALFABEAM 5 8.910148940950469 22.776305713095503 2009-Apr-14 19:51:20 LOG4 log_alfabeam: ALFABEAM 6 8.912316009127387 22.674489314595082 2009-Apr-14 19:51:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400209 2009-Apr-14 19:51:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:51:21 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-14 19:51:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:51:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:51:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-14 19:51:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85882.00 2009-Apr-14 19:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.557 (still bad) 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-14 19:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.552 (still bad) 2009-Apr-14 19:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.555 (still bad) 2009-Apr-14 19:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.551 (still bad) 2009-Apr-14 19:51:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.555 (still bad) 2009-Apr-14 19:51:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:51:32 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-14 19:51:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:51:32 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-14 19:51:32 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-14 19:51:32 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-14 19:51:32 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-14 19:51:32 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:51:32 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:51:32 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:51:32 LOG2 antvel: Parameters to Doppler: Topocentric 85892 2009 104 0.0 2009-Apr-14 19:51:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:51:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-14 19:51:32 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-14 19:51:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:51:32 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:51:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:51:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-14 19:51:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:51:32 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-14 19:51:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-14 19:51:32 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.960629 2009.2870019266356 18.999933 2009-Apr-14 19:51:32 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666696 22.751666666666669 2009-Apr-14 19:51:32 LOG4 log_alfabeam: ALFABEAM 1 8.918753240944637 22.649553712387323 2009-Apr-14 19:51:32 LOG4 log_alfabeam: ALFABEAM 2 8.923116855127512 22.726099191017752 2009-Apr-14 19:51:32 LOG4 log_alfabeam: ALFABEAM 3 8.921128506408776 22.828637931883616 2009-Apr-14 19:51:32 LOG4 log_alfabeam: ALFABEAM 4 8.914517860921555 22.853609723328624 2009-Apr-14 19:51:32 LOG4 log_alfabeam: ALFABEAM 5 8.910130158746611 22.775332036977247 2009-Apr-14 19:51:32 LOG4 log_alfabeam: ALFABEAM 6 8.912376374268989 22.673844564210931 2009-Apr-14 19:51:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400210 2009-Apr-14 19:51:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:51:33 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-14 19:51:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:51:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:51:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-14 19:51:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85894.00 2009-Apr-14 19:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.555 (still bad) 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.548 (still bad) 2009-Apr-14 19:51:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 19:51:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.372 1.442 1.377 1.399 2009-Apr-14 19:51:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.315 1.267 1.426 1.505 2009-Apr-14 19:51:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.442 1.546 1.410 1.303 2009-Apr-14 19:51:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.512 0.102 1.348 0.126 2009-Apr-14 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.549 (still bad) 2009-Apr-14 19:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.544 (still bad) 2009-Apr-14 19:51:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:51:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:51:44 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-14 19:51:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:51:44 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-14 19:51:44 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-14 19:51:44 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-14 19:51:44 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-14 19:51:44 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:51:44 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:51:44 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:51:44 LOG2 antvel: Parameters to Doppler: Topocentric 85904 2009 104 0.0 2009-Apr-14 19:51:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:51:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-14 19:51:44 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-14 19:51:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:51:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:51:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:51:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-14 19:51:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:51:44 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-14 19:51:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-14 19:51:44 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.963972 2009.2870023068929 18.999933 2009-Apr-14 19:51:44 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666737 22.751666666666676 2009-Apr-14 19:51:44 LOG4 log_alfabeam: ALFABEAM 1 8.918832628167072 22.649870694186891 2009-Apr-14 19:51:44 LOG4 log_alfabeam: ALFABEAM 2 8.923136465543292 22.727063071873602 2009-Apr-14 19:51:44 LOG4 log_alfabeam: ALFABEAM 3 8.921068172292514 22.829298918272489 2009-Apr-14 19:51:44 LOG4 log_alfabeam: ALFABEAM 4 8.914438570462456 22.853283685486950 2009-Apr-14 19:51:44 LOG4 log_alfabeam: ALFABEAM 5 8.910112177923448 22.774357737046415 2009-Apr-14 19:51:44 LOG4 log_alfabeam: ALFABEAM 6 8.912437102708937 22.673210192827060 2009-Apr-14 19:51:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400211 2009-Apr-14 19:51:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:51:45 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-14 19:51:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.548 (still bad) 2009-Apr-14 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-14 19:51:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85906.00 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.539 (still bad) 2009-Apr-14 19:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.536 (still bad) 2009-Apr-14 19:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.534 (still bad) 2009-Apr-14 19:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-14 19:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-14 19:51:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:51:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:51:56 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-14 19:51:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:51:56 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-14 19:51:56 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-14 19:51:56 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-14 19:51:56 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-14 19:51:56 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:51:56 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:51:56 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:51:56 LOG2 antvel: Parameters to Doppler: Topocentric 85916 2009 104 0.0 2009-Apr-14 19:51:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:51:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-14 19:51:56 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-14 19:51:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:51:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:51:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:51:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-14 19:51:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:51:56 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-14 19:51:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-14 19:51:56 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.967314 2009.2870026871499 18.999933 2009-Apr-14 19:51:56 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666735 22.751666666666669 2009-Apr-14 19:51:56 LOG4 log_alfabeam: ALFABEAM 1 8.918911540802366 22.650198542797170 2009-Apr-14 19:51:56 LOG4 log_alfabeam: ALFABEAM 2 8.923155275225604 22.728027150499198 2009-Apr-14 19:51:56 LOG4 log_alfabeam: ALFABEAM 3 8.921007491658225 22.829949045629903 2009-Apr-14 19:51:56 LOG4 log_alfabeam: ALFABEAM 4 8.914359768901505 22.852946853147390 2009-Apr-14 19:51:56 LOG4 log_alfabeam: ALFABEAM 5 8.910095009221774 22.773383736918166 2009-Apr-14 19:51:56 LOG4 log_alfabeam: ALFABEAM 6 8.912498134531440 22.672586716694077 2009-Apr-14 19:51:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400212 2009-Apr-14 19:51:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:51:57 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-14 19:51:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:51:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:51:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.534 (still bad) 2009-Apr-14 19:51:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-14 19:51:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85918.00 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-14 19:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.531 (still bad) 2009-Apr-14 19:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.530 (still bad) 2009-Apr-14 19:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.536 (still bad) 2009-Apr-14 19:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.534 (still bad) 2009-Apr-14 19:52:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:52:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:52:08 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-14 19:52:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:52:08 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-14 19:52:08 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-14 19:52:08 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-14 19:52:08 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-14 19:52:08 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:52:08 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:52:08 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:52:08 LOG2 antvel: Parameters to Doppler: Topocentric 85928 2009 104 0.0 2009-Apr-14 19:52:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:52:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-14 19:52:08 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-14 19:52:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:52:08 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:52:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:52:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-14 19:52:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:52:08 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-14 19:52:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-14 19:52:08 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.970656 2009.2870030674069 18.999933 2009-Apr-14 19:52:08 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666702 22.751666666666669 2009-Apr-14 19:52:08 LOG4 log_alfabeam: ALFABEAM 1 8.918989979013862 22.650537151772891 2009-Apr-14 19:52:08 LOG4 log_alfabeam: ALFABEAM 2 8.923173289765749 22.728991380050836 2009-Apr-14 19:52:08 LOG4 log_alfabeam: ALFABEAM 3 8.920946470328138 22.830588369797397 2009-Apr-14 19:52:08 LOG4 log_alfabeam: ALFABEAM 4 8.914281455911006 22.852599335596189 2009-Apr-14 19:52:08 LOG4 log_alfabeam: ALFABEAM 5 8.910078646320295 22.772410082994249 2009-Apr-14 19:52:08 LOG4 log_alfabeam: ALFABEAM 6 8.912559464148821 22.671974069395009 2009-Apr-14 19:52:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400213 2009-Apr-14 19:52:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:52:09 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-14 19:52:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:52:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:52:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-14 19:52:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85930.00 2009-Apr-14 19:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.536 (still bad) 2009-Apr-14 19:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.532 (still bad) 2009-Apr-14 19:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.534 (still bad) 2009-Apr-14 19:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.535 (still bad) 2009-Apr-14 19:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.529 (still bad) 2009-Apr-14 19:52:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:52:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:52:20 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-14 19:52:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:52:20 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-14 19:52:20 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-14 19:52:20 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-14 19:52:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-14 19:52:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 19:52:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 19:52:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:52:20 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-14 19:52:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:52:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 19:52:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:52:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:52:20 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-14 19:52:20 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-14 19:52:20 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-14 19:52:20 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-14 19:52:20 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-14 19:52:20 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:52:20 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:52:20 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:52:20 LOG2 antvel: Parameters to Doppler: Topocentric 85940 2009 104 0.0 2009-Apr-14 19:52:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:52:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-14 19:52:20 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-14 19:52:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:52:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:52:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:52:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-14 19:52:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:52:20 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-14 19:52:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-14 19:52:21 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.973999 2009.2870034476639 18.999933 2009-Apr-14 19:52:21 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666696 22.751666666666662 2009-Apr-14 19:52:21 LOG4 log_alfabeam: ALFABEAM 1 8.919067943071338 22.650886418571684 2009-Apr-14 19:52:21 LOG4 log_alfabeam: ALFABEAM 2 8.923190514596541 22.729955716532302 2009-Apr-14 19:52:21 LOG4 log_alfabeam: ALFABEAM 3 8.920885113855816 22.831216945681206 2009-Apr-14 19:52:21 LOG4 log_alfabeam: ALFABEAM 4 8.914203631056749 22.852241238141850 2009-Apr-14 19:52:21 LOG4 log_alfabeam: ALFABEAM 5 8.910063083068746 22.771436818718268 2009-Apr-14 19:52:21 LOG4 log_alfabeam: ALFABEAM 6 8.912621086247656 22.671372185653169 2009-Apr-14 19:52:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400214 2009-Apr-14 19:52:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:52:21 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-14 19:52:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:52:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:52:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-14 19:52:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85942.00 2009-Apr-14 19:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.531 (still bad) 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-14 19:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 19:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 19:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 19:52:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 19:52:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:52:32 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-14 19:52:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:52:32 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-14 19:52:32 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-14 19:52:32 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-14 19:52:32 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-14 19:52:32 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:52:32 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:52:32 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:52:32 LOG2 antvel: Parameters to Doppler: Topocentric 85952 2009 104 0.0 2009-Apr-14 19:52:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:52:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-14 19:52:32 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-14 19:52:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:52:32 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:52:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:52:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-14 19:52:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:52:32 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-14 19:52:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-14 19:52:32 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.977341 2009.2870038279209 18.999933 2009-Apr-14 19:52:32 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666710 22.751666666666665 2009-Apr-14 19:52:32 LOG4 log_alfabeam: ALFABEAM 1 8.919145364055161 22.651245917122441 2009-Apr-14 19:52:32 LOG4 log_alfabeam: ALFABEAM 2 8.923206940592602 22.730919253730033 2009-Apr-14 19:52:32 LOG4 log_alfabeam: ALFABEAM 3 8.920823483003321 22.831834277771367 2009-Apr-14 19:52:32 LOG4 log_alfabeam: ALFABEAM 4 8.914126362950748 22.851872997360662 2009-Apr-14 19:52:32 LOG4 log_alfabeam: ALFABEAM 5 8.910048326383906 22.770464856988905 2009-Apr-14 19:52:32 LOG4 log_alfabeam: ALFABEAM 6 8.912682940130047 22.670781526863607 2009-Apr-14 19:52:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400215 2009-Apr-14 19:52:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:52:33 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-14 19:52:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:52:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:52:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-14 19:52:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85954.00 2009-Apr-14 19:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 19:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 19:52:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 19:52:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 1.070 1.017 1.034 2009-Apr-14 19:52:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.918 1.039 1.099 2009-Apr-14 19:52:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 1.106 1.029 0.981 2009-Apr-14 19:52:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.102 0.952 0.125 2009-Apr-14 19:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 19:52:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:52:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:52:44 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-14 19:52:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:52:44 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-14 19:52:44 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-14 19:52:44 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-14 19:52:44 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-14 19:52:44 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:52:44 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:52:44 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:52:44 LOG2 antvel: Parameters to Doppler: Topocentric 85964 2009 104 0.0 2009-Apr-14 19:52:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:52:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-14 19:52:44 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-14 19:52:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:52:44 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:52:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:52:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-14 19:52:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:52:44 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-14 19:52:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-14 19:52:44 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.980684 2009.2870042081781 18.999933 2009-Apr-14 19:52:44 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666693 22.751666666666669 2009-Apr-14 19:52:44 LOG4 log_alfabeam: ALFABEAM 1 8.919222266743434 22.651615637371869 2009-Apr-14 19:52:44 LOG4 log_alfabeam: ALFABEAM 2 8.923222579531378 22.731882242566900 2009-Apr-14 19:52:44 LOG4 log_alfabeam: ALFABEAM 3 8.920761565005130 22.832440628084171 2009-Apr-14 19:52:44 LOG4 log_alfabeam: ALFABEAM 4 8.914049626665854 22.851494623114899 2009-Apr-14 19:52:44 LOG4 log_alfabeam: ALFABEAM 5 8.910034364276575 22.769493942494115 2009-Apr-14 19:52:44 LOG4 log_alfabeam: ALFABEAM 6 8.912745038971753 22.670201829069821 2009-Apr-14 19:52:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400216 2009-Apr-14 19:52:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:52:45 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-14 19:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 19:52:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:52:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:52:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-14 19:52:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85966.00 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 19:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 19:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 19:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 19:52:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:52:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:52:56 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-14 19:52:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:52:56 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-14 19:52:56 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-14 19:52:56 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-14 19:52:56 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-14 19:52:56 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:52:56 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:52:56 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:52:56 LOG2 antvel: Parameters to Doppler: Topocentric 85976 2009 104 0.0 2009-Apr-14 19:52:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:52:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-14 19:52:56 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-14 19:52:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:52:56 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:52:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:52:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-14 19:52:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:52:56 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-14 19:52:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-14 19:52:56 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.984026 2009.2870045884351 18.999933 2009-Apr-14 19:52:56 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666716 22.751666666666665 2009-Apr-14 19:52:56 LOG4 log_alfabeam: ALFABEAM 1 8.919298584339499 22.651995125555029 2009-Apr-14 19:52:56 LOG4 log_alfabeam: ALFABEAM 2 8.923237424755316 22.732843785561105 2009-Apr-14 19:52:56 LOG4 log_alfabeam: ALFABEAM 3 8.920699421023809 22.833035538547747 2009-Apr-14 19:52:56 LOG4 log_alfabeam: ALFABEAM 4 8.913973488644579 22.851106579193868 2009-Apr-14 19:52:56 LOG4 log_alfabeam: ALFABEAM 5 8.910021201199175 22.768524977427955 2009-Apr-14 19:52:56 LOG4 log_alfabeam: ALFABEAM 6 8.912807321832791 22.669633516789119 2009-Apr-14 19:52:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400217 2009-Apr-14 19:52:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:52:57 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-14 19:52:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:52:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:52:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:52:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 19:52:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-14 19:52:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85978.00 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:52:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 19:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 19:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 19:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 19:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 19:53:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:53:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:53:08 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-14 19:53:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:53:08 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-14 19:53:08 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-14 19:53:08 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-14 19:53:08 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-14 19:53:08 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:53:08 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28700 J 2009-Apr-14 19:53:08 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:53:08 LOG2 antvel: Parameters to Doppler: Topocentric 85988 2009 104 0.0 2009-Apr-14 19:53:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:53:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-14 19:53:08 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-14 19:53:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:53:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:53:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:53:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-14 19:53:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:53:08 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-14 19:53:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-14 19:53:08 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.987369 2009.2870049686921 18.999933 2009-Apr-14 19:53:08 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666702 22.751666666666665 2009-Apr-14 19:53:08 LOG4 log_alfabeam: ALFABEAM 1 8.919374342497498 22.652384369160739 2009-Apr-14 19:53:08 LOG4 log_alfabeam: ALFABEAM 2 8.923251488582268 22.733804141344965 2009-Apr-14 19:53:08 LOG4 log_alfabeam: ALFABEAM 3 8.920637037967248 22.833619281859846 2009-Apr-14 19:53:08 LOG4 log_alfabeam: ALFABEAM 4 8.913897923071341 22.850708877638709 2009-Apr-14 19:53:08 LOG4 log_alfabeam: ALFABEAM 5 8.910008824647287 22.767557698017267 2009-Apr-14 19:53:08 LOG4 log_alfabeam: ALFABEAM 6 8.912869802269430 22.669076315945407 2009-Apr-14 19:53:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400218 2009-Apr-14 19:53:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:53:09 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-14 19:53:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:53:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:53:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-14 19:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 19:53:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85990.00 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:53:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 19:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 19:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 19:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 19:53:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:53:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:53:20 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-14 19:53:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:53:20 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-14 19:53:20 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-14 19:53:20 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-14 19:53:20 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-14 19:53:20 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:53:20 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:53:20 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:53:20 LOG2 antvel: Parameters to Doppler: Topocentric 86000 2009 104 0.0 2009-Apr-14 19:53:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:53:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-14 19:53:20 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-14 19:53:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:53:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:53:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:53:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-14 19:53:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:53:20 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-14 19:53:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-14 19:53:20 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.990711 2009.2870053489492 18.999933 2009-Apr-14 19:53:20 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666694 22.751666666666669 2009-Apr-14 19:53:20 LOG4 log_alfabeam: ALFABEAM 1 8.919449476683276 22.652782889391528 2009-Apr-14 19:53:20 LOG4 log_alfabeam: ALFABEAM 2 8.923264766745834 22.734762423843410 2009-Apr-14 19:53:20 LOG4 log_alfabeam: ALFABEAM 3 8.920574477173981 22.834191437447299 2009-Apr-14 19:53:20 LOG4 log_alfabeam: ALFABEAM 4 8.913822994083054 22.850302006749413 2009-Apr-14 19:53:20 LOG4 log_alfabeam: ALFABEAM 5 8.909997236697441 22.766592993125034 2009-Apr-14 19:53:20 LOG4 log_alfabeam: ALFABEAM 6 8.912932419315281 22.668530614296039 2009-Apr-14 19:53:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400219 2009-Apr-14 19:53:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:53:21 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-14 19:53:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:53:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:53:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-14 19:53:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86002.00 2009-Apr-14 19:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:53:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.089 (still bad) 2009-Apr-14 19:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.088 (still bad) 2009-Apr-14 19:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 19:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 19:53:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:53:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:53:32 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-14 19:53:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:53:32 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-14 19:53:32 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-14 19:53:32 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-14 19:53:32 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-14 19:53:32 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:53:32 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:53:32 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:53:32 LOG2 antvel: Parameters to Doppler: Topocentric 86012 2009 104 0.0 2009-Apr-14 19:53:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:53:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-14 19:53:32 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-14 19:53:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:53:32 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:53:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:53:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-14 19:53:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:53:32 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-14 19:53:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-14 19:53:32 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.994054 2009.2870057292062 18.999933 2009-Apr-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666679 22.751666666666669 2009-Apr-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 1 8.919524013459032 22.653190672846179 2009-Apr-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 2 8.923277272036440 22.735718900460860 2009-Apr-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 3 8.920511725120569 22.834752288194522 2009-Apr-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 4 8.913748674946412 22.849885979162732 2009-Apr-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 5 8.909986424404950 22.765630589509104 2009-Apr-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 6 8.912995187006125 22.667996128227927 2009-Apr-14 19:53:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400220 2009-Apr-14 19:53:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:53:33 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-14 19:53:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:53:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:53:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-14 19:53:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86014.00 2009-Apr-14 19:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:53:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 19:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.086 (still bad) 2009-Apr-14 19:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.087 (still bad) 2009-Apr-14 19:53:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-14 19:53:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.043 0.982 1.007 2009-Apr-14 19:53:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.897 0.990 1.077 2009-Apr-14 19:53:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.086 0.962 0.957 2009-Apr-14 19:53:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.101 0.937 0.125 2009-Apr-14 19:53:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:53:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:53:44 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-14 19:53:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:53:44 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-14 19:53:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-14 19:53:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-14 19:53:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-14 19:53:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:53:44 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-14 19:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.089 (still bad) 2009-Apr-14 19:53:44 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:53:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-14 19:53:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:53:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:53:44 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-14 19:53:44 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-14 19:53:44 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-14 19:53:44 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-14 19:53:44 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:53:44 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:53:44 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:53:44 LOG2 antvel: Parameters to Doppler: Topocentric 86024 2009 104 0.0 2009-Apr-14 19:53:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:53:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-14 19:53:44 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-14 19:53:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:53:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:53:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:53:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-14 19:53:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:53:44 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-14 19:53:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-14 19:53:44 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 8.997396 2009.2870061094634 18.999933 2009-Apr-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666686 22.751666666666669 2009-Apr-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 1 8.919597890668916 22.653607218449409 2009-Apr-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 2 8.923289002487245 22.736672699002995 2009-Apr-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 3 8.920448843105911 22.835301450779554 2009-Apr-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 4 8.913675027381700 22.849461304901187 2009-Apr-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 5 8.909976387575115 22.764671360294582 2009-Apr-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 6 8.913058044556982 22.667473209148103 2009-Apr-14 19:53:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400221 2009-Apr-14 19:53:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:53:45 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-14 19:53:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-14 19:53:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:53:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-14 19:53:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86026.00 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:53:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.562 (still bad) 2009-Apr-14 19:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.554 (still bad) 2009-Apr-14 19:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.560 (still bad) 2009-Apr-14 19:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.560 (still bad) 2009-Apr-14 19:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.552 (still bad) 2009-Apr-14 19:53:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:53:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:53:56 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-14 19:53:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:53:56 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-14 19:53:56 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-14 19:53:56 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-14 19:53:56 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-14 19:53:56 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:53:56 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:53:56 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:53:56 LOG2 antvel: Parameters to Doppler: Topocentric 86036 2009 104 0.0 2009-Apr-14 19:53:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:53:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-14 19:53:56 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-14 19:53:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:53:56 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:53:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:53:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-14 19:53:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:53:56 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-14 19:53:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-14 19:53:56 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 9.000739 2009.2870064897204 18.999933 2009-Apr-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666716 22.751666666666669 2009-Apr-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 1 8.919671135798255 22.654032513491885 2009-Apr-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 2 8.923299971284431 22.737624096547883 2009-Apr-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 3 8.920385817077600 22.835839217594231 2009-Apr-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 4 8.913602023725048 22.849027995605915 2009-Apr-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 5 8.909967112905306 22.763715021934757 2009-Apr-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 6 8.913121006572483 22.666961564659776 2009-Apr-14 19:53:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400222 2009-Apr-14 19:53:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:53:57 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-14 19:53:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:53:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-14 19:53:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:53:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:53:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-14 19:53:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86038.00 2009-Apr-14 19:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.556 (still bad) 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:53:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.561 (still bad) 2009-Apr-14 19:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.552 (still bad) 2009-Apr-14 19:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.553 (still bad) 2009-Apr-14 19:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.556 (still bad) 2009-Apr-14 19:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.550 (still bad) 2009-Apr-14 19:54:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:54:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:54:08 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-14 19:54:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:54:08 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-14 19:54:08 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-14 19:54:08 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-14 19:54:08 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-14 19:54:08 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:54:08 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:54:08 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:54:08 LOG2 antvel: Parameters to Doppler: Topocentric 86048 2009 104 0.0 2009-Apr-14 19:54:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:54:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-14 19:54:08 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-14 19:54:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:54:08 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:54:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:54:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-14 19:54:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:54:08 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-14 19:54:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-14 19:54:08 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 9.004081 2009.2870068699774 18.999933 2009-Apr-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666735 22.751666666666676 2009-Apr-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 1 8.919743689160907 22.654466037426896 2009-Apr-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 2 8.923310178654155 22.738572237033441 2009-Apr-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 3 8.920322708088799 22.836365242032681 2009-Apr-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 4 8.913529723192990 22.848586580189608 2009-Apr-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 5 8.909958598047288 22.762762429648738 2009-Apr-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 6 8.913184012645511 22.666461510498735 2009-Apr-14 19:54:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400223 2009-Apr-14 19:54:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:54:09 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-14 19:54:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:54:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-14 19:54:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-14 19:54:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86050.00 2009-Apr-14 19:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.552 (still bad) 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.555 (still bad) 2009-Apr-14 19:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.547 (still bad) 2009-Apr-14 19:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.549 (still bad) 2009-Apr-14 19:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.554 (still bad) 2009-Apr-14 19:54:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:54:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:54:20 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-14 19:54:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:54:20 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-14 19:54:20 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-14 19:54:20 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-14 19:54:20 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-14 19:54:20 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:54:20 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:54:20 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:54:20 LOG2 antvel: Parameters to Doppler: Topocentric 86060 2009 104 0.0 2009-Apr-14 19:54:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:54:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-14 19:54:20 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-14 19:54:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:54:20 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:54:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:54:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-14 19:54:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:54:20 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-14 19:54:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-14 19:54:20 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 9.007423 2009.2870072502344 18.999933 2009-Apr-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666716 22.751666666666669 2009-Apr-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 1 8.919815557764004 22.654907646479497 2009-Apr-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 2 8.923319635377430 22.739517125722795 2009-Apr-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 3 8.920259520387702 22.836879672956574 2009-Apr-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 4 8.913458118515452 22.848137203356767 2009-Apr-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 5 8.909950831641858 22.761813572264685 2009-Apr-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 6 8.913247059160973 22.665972890883012 2009-Apr-14 19:54:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400224 2009-Apr-14 19:54:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:54:21 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-14 19:54:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:54:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-14 19:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.546 (still bad) 2009-Apr-14 19:54:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-14 19:54:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86062.00 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:54:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.550 (still bad) 2009-Apr-14 19:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.545 (still bad) 2009-Apr-14 19:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.542 (still bad) 2009-Apr-14 19:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.541 (still bad) 2009-Apr-14 19:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.540 (still bad) 2009-Apr-14 19:54:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:54:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:54:32 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-14 19:54:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:54:32 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-14 19:54:32 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-14 19:54:32 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-14 19:54:32 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-14 19:54:32 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:54:32 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:54:32 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:54:32 LOG2 antvel: Parameters to Doppler: Topocentric 86072 2009 104 0.0 2009-Apr-14 19:54:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:54:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-14 19:54:32 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-14 19:54:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:54:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:54:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:54:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-14 19:54:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:54:32 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-14 19:54:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-14 19:54:32 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 9.010766 2009.2870076304916 18.999933 2009-Apr-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666705 22.751666666666669 2009-Apr-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 1 8.919886748660625 22.655357203415271 2009-Apr-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 2 8.923328351909536 22.740458771351260 2009-Apr-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 3 8.920196257837874 22.837382656258384 2009-Apr-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 4 8.913387202381701 22.847680003191950 2009-Apr-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 5 8.909943802677502 22.760868435180466 2009-Apr-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 6 8.913310142878860 22.665495553313598 2009-Apr-14 19:54:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400225 2009-Apr-14 19:54:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:54:33 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-14 19:54:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:54:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-14 19:54:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.542 (still bad) 2009-Apr-14 19:54:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-14 19:54:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86074.00 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:54:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.542 (still bad) 2009-Apr-14 19:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.528 (still bad) 2009-Apr-14 19:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.530 (still bad) 2009-Apr-14 19:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.533 (still bad) 2009-Apr-14 19:54:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 19:54:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.348 1.435 1.354 1.392 2009-Apr-14 19:54:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.301 1.253 1.392 1.490 2009-Apr-14 19:54:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.409 1.527 1.371 1.287 2009-Apr-14 19:54:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.501 0.102 1.339 0.125 2009-Apr-14 19:54:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:54:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:54:44 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-14 19:54:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:54:44 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-14 19:54:44 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-14 19:54:44 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-14 19:54:44 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-14 19:54:44 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:54:44 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:54:44 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:54:44 LOG2 antvel: Parameters to Doppler: Topocentric 86084 2009 104 0.0 2009-Apr-14 19:54:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:54:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-14 19:54:44 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-14 19:54:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:54:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:54:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:54:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-14 19:54:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:54:44 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-14 19:54:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-14 19:54:44 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 9.014108 2009.2870080107487 18.999933 2009-Apr-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666712 22.751666666666676 2009-Apr-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 1 8.919957205988061 22.655814163757714 2009-Apr-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 2 8.923336331541314 22.741396345749457 2009-Apr-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 3 8.920132980764908 22.837873898832534 2009-Apr-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 4 8.913317030142272 22.847215531633893 2009-Apr-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 5 8.909937505819629 22.759927843247674 2009-Apr-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 6 8.913373204297555 22.665029761820325 2009-Apr-14 19:54:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400226 2009-Apr-14 19:54:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:54:45 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-14 19:54:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:54:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-14 19:54:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-14 19:54:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86086.00 2009-Apr-14 19:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.525 (still bad) 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.529 (still bad) 2009-Apr-14 19:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.526 (still bad) 2009-Apr-14 19:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.527 (still bad) 2009-Apr-14 19:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.526 (still bad) 2009-Apr-14 19:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.524 (still bad) 2009-Apr-14 19:54:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:54:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:54:56 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-14 19:54:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:54:56 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-14 19:54:56 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-14 19:54:56 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-14 19:54:56 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-14 19:54:56 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:54:56 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:54:56 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:54:56 LOG2 antvel: Parameters to Doppler: Topocentric 86096 2009 104 0.0 2009-Apr-14 19:54:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:54:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-14 19:54:56 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-14 19:54:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:54:56 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:54:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:54:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-14 19:54:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-14 19:54:56 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-14 19:54:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-14 19:54:56 LOG5 log_alfabeam: Parameters: 8.9166666666666661 22.751666666666665 9.017451 2009.2870083910057 18.999933 2009-Apr-14 19:54:56 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666702 22.751666666666669 2009-Apr-14 19:54:56 LOG4 log_alfabeam: ALFABEAM 1 8.920026959502676 22.656278523264525 2009-Apr-14 19:54:56 LOG4 log_alfabeam: ALFABEAM 2 8.923343588075008 22.742330152975704 2009-Apr-14 19:54:56 LOG4 log_alfabeam: ALFABEAM 3 8.920069673436299 22.838353712842636 2009-Apr-14 19:54:56 LOG4 log_alfabeam: ALFABEAM 4 8.913247571857577 22.846743791092003 2009-Apr-14 19:54:56 LOG4 log_alfabeam: ALFABEAM 5 8.909931927266410 22.758991484706215 2009-Apr-14 19:54:56 LOG4 log_alfabeam: ALFABEAM 6 8.913436259769167 22.664575206269220 2009-Apr-14 19:54:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910400227 2009-Apr-14 19:54:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-14 19:54:57 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-14 19:54:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:54:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-14 19:54:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:54:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:54:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-14 19:54:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86098.00 2009-Apr-14 19:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.524 (still bad) 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.528 (still bad) 2009-Apr-14 19:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.528 (still bad) 2009-Apr-14 19:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.525 (still bad) 2009-Apr-14 19:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.525 (still bad) 2009-Apr-14 19:55:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 19:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.523 (still bad) 2009-Apr-14 19:55:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-14 19:55:08 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-14 19:55:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-14 19:55:08 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-14 19:55:08 INFO2 smartfreq: Switching off CAL 2009-Apr-14 19:55:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 19:55:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 19:55:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:55:08 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-14 19:55:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:55:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 19:55:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:55:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:55:08 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-14 19:55:08 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-14 19:55:08 LOG5 antvel: Calling 'antvel 85500.000000 224506.000000 J Topocentric 0' 2009-Apr-14 19:55:08 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:55:08 LOG2 antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:55:08 LOG2 antvel: Parameters to Doppler: Topocentric 86108 2009 104 0.0 2009-Apr-14 19:55:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:55:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-14 19:55:08 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-14 19:55:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:55:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:55:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:55:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:55:08 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-14 19:55:08 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-14 19:55:08 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-14 19:55:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:55:08 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-14 19:55:08 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-14 19:55:08 NOTE run_command_file: DONE with command file processing 2009-Apr-14 19:55:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-14 19:55:09 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-14 19:55:09 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-14 19:55:09 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-14 19:55:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:55:09 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-14 19:55:09 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-14 19:55:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:55:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:55:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:55:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.523 (still bad) 2009-Apr-14 19:55:37 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-14 19:55:37 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-14 19:55:37 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-14 19:55:37 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-14 19:55:37 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-14 19:55:37 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-14 19:55:38 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-14 19:55:38 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-14 19:55:38 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-14 19:55:38 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-14 19:55:38 LOG3 exec_msg: Closing socket 2009-Apr-14 19:55:38 LOG3 exec_msg: Closing socket 2009-Apr-14 19:55:38 LOG3 exec_msg: Closing socket 2009-Apr-14 19:55:38 LOG3 exec_msg: Closing socket 2009-Apr-14 19:55:40 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-14 19:55:40 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-14 19:55:40 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-14 19:55:40 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-14 19:55:51 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-14 19:55:52 LOG2 CIMA-antvel: Precessing RA = 08:55:00.0 Dec = +22:45:06.0 Epoch = 2009.28701 J 2009-Apr-14 19:55:52 LOG2 CIMA-antvel: Computed apparent RA = 08:55:33.7 Dec = +22:42:57.8 2009-Apr-14 19:55:52 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 86151 2009 104 0.0 2009-Apr-14 19:55:52 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-14 19:55:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-14 19:55:53 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-14 19:55:53 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-14 19:55:53 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-14 19:55:53 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-14 19:55:53 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-14 19:55:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-14 19:55:53 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-14 19:55:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 19:55:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:55:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 19:55:53 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-14 19:55:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 19:55:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 19:55:53 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-14 19:55:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 19:55:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:55:53 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-14 19:55:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-14 19:55:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-14 19:55:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-14 19:55:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-14 19:55:53 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-14 19:55:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-14 19:55:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:55:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-14 19:55:53 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-14 19:55:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:55:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-14 19:55:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:55:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:55:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:55:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:55:54 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-14 19:55:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-14 19:55:54 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-14 19:55:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-14 19:55:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-14 19:55:54 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-14 19:55:54 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-14 19:55:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:55:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-14 19:55:54 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-14 19:55:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-14 19:55:54 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-14 19:55:54 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-14 19:55:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-14 19:55:54 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-14 19:55:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-14 19:55:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-14 19:55:55 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-14 19:55:55 START begin_task: Starting task 'selecting calibration port' 2009-Apr-14 19:55:55 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-14 19:55:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-14 19:55:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:55:55 START begin_task: Starting task 'waiting on calport' 2009-Apr-14 19:55:55 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-14 19:55:55 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-14 19:55:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:55:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:55:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:55:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-14 19:55:55 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-14 19:55:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-14 19:55:55 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 19:55:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 19:55:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:55:55 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:55:55 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:55:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 19:55:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:55:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:55:55 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:55:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:55:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-14 19:55:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-14 19:55:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 19:55:55 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-14 19:55:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-14 19:55:55 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 19:55:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 19:55:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 19:55:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 19:55:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 19:55:55 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-14 19:55:55 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-14 19:55:55 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-14 19:55:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:55:55 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-14 19:55:55 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-14 19:55:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-14 19:55:56 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-14 19:55:56 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-14 19:55:56 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-14 19:55:56 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-14 19:55:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-14 19:55:56 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-14 19:55:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-14 19:55:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-14 19:55:56 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-14 19:55:56 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-14 19:55:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:55:56 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-14 19:55:56 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-14 19:55:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-14 19:55:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-14 19:55:57 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-14 19:56:11 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-14 19:56:11 LOG4 exec_msg: From OBSERVER: track_new_source drift94p1 090300.0 +224506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-14 19:56:11 LOG1 track_new_source: Calling 'track_new_source drift94p1 090300.0 +224506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-14 19:56:11 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-14 19:56:11 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift94p1} INFO {Selecting source 'drift94p1' ...} 2009-Apr-14 19:56:11 LOG3 track_source: Calling 'track_source drift94p1 090300.0 +224506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-14 19:56:11 START begin_task: Starting task 'sending tracking commands' 2009-Apr-14 19:56:11 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift94p1} INFO {Slewing to source 'drift94p1' ...} 2009-Apr-14 19:56:11 INFO1 track_source: Starting to track drift94p1 2009-Apr-14 19:56:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift94p1" 2009-Apr-14 19:56:11 LOG3 vw_send: To DATATAKING: set ra 090300.0 2009-Apr-14 19:56:11 LOG3 vw_send: To DATATAKING: set dec +224506 2009-Apr-14 19:56:11 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-14 19:56:11 LOG3 vw_send: To DATATAKING: pnt tr 090300.0 +224506 -CJ 2009-Apr-14 19:56:11 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-14 19:56:11 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-14 19:56:11 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-14 19:56:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:56:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-14 19:56:11 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-14 19:56:11 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-14 19:56:11 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-14 19:56:11 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-14 19:56:11 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-14 19:56:11 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-14 19:56:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:56:11 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-14 19:56:11 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-14 19:56:11 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 DONE finish_task: DONE finished selecting: new source 2009-Apr-14 19:56:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:56:11 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-14 19:56:11 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift94p1" 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: set ra 090300.0 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: set dec +224506 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: vw% 090300.0 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: vw% +224506 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: pnt tr 090300.0 +224506 -CJ 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-14 19:56:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:56:17 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-14 19:56:17 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-14 19:56:17 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 19:56:17 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-14 19:56:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-14 19:56:17 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-14 19:56:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-14 19:56:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-14 19:56:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:56:17 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-14 19:56:17 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-14 19:56:17 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-14 19:56:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:56:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:56:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:56:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-14 19:56:20 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-14 19:56:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-14 19:56:20 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 19:56:20 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-14 19:56:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-14 19:56:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:56:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:56:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:56:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:56:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-14 19:56:21 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-14 19:56:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-14 19:56:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:56:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-14 19:56:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-14 19:56:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-14 19:56:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-14 19:56:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-14 19:56:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-14 19:56:21 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-14 19:56:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.973 1.058 ALFA beam 1: 0.989 1.017 2009-Apr-14 19:56:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.937 0.908 ALFA beam 3: 0.993 1.073 2009-Apr-14 19:56:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.000 1.082 ALFA beam 5: 0.989 0.955 2009-Apr-14 19:56:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.036 0.099 ALFA beam 7: 0.931 0.123 2009-Apr-14 19:56:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 19:56:21 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-14 19:56:21 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-14 19:56:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:56:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 19:56:21 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-14 19:56:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-14 19:56:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 19:56:21 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-14 19:56:21 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-14 19:56:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 19:56:21 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 19:56:21 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-14 19:56:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-14 19:56:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.058 0.989 1.017 2009-Apr-14 19:56:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.908 0.993 1.073 2009-Apr-14 19:56:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.000 1.082 0.989 0.955 2009-Apr-14 19:56:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.099 0.931 0.123 2009-Apr-14 19:56:29 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-14 19:56:29 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p1 090300.0 +224506 J 0 Topocentric velocity(optical) 2009-Apr-14 19:56:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p1 090300.0 +224506 J 0 Topocentric velocity(optical)' 2009-Apr-14 19:56:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-14 19:56:29 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-14 19:56:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift94p1' 2009-Apr-14 19:56:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-14 19:56:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift94p1} 2009-Apr-14 19:56:29 INFO5 fixed_driftmap: Start: year = 2009.2870113379979 RA = 09:03:33.6 Dec = +22:42:52.9 2009-Apr-14 19:56:29 NOTE fixed_driftmap: Setting ZA to 4:21:39.2 ... 2009-Apr-14 19:56:29 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.36 2009-Apr-14 19:56:29 LOG3 track_source: Calling 'track_source drift94p1 180.0 4.3608762322 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-14 19:56:29 START begin_task: Starting task 'sending tracking commands' 2009-Apr-14 19:56:29 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-14 19:56:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift94p1} INFO {Slewing to source 'drift94p1' ...} 2009-Apr-14 19:56:29 INFO1 track_source: Starting to track drift94p1 2009-Apr-14 19:56:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift94p1" 2009-Apr-14 19:56:29 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-14 19:56:29 LOG3 vw_send: To DATATAKING: set dec 4.3608762322 2009-Apr-14 19:56:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-14 19:56:30 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.3608762322 -CF 2009-Apr-14 19:56:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-14 19:56:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-14 19:56:30 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-14 19:56:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-14 19:56:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:56:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-14 19:56:30 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-14 19:56:30 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-14 19:56:30 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-14 19:56:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-14 19:56:30 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-14 19:56:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-14 19:56:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-14 19:56:30 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-14 19:56:30 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift94p1" 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: set dec 4.3608762322 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: vw% 4.3608762322 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.3608762322 -CF 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-14 19:56:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:56:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-14 19:56:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-14 19:56:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-14 19:56:31 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-14 19:56:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-14 19:56:31 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-14 19:56:31 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-14 19:56:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-14 19:56:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:56:31 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-14 19:56:31 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-14 19:56:31 START begin_task: Starting task 'waiting on telescope' 2009-Apr-14 19:56:31 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-14 19:56:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-14 19:56:31 LOG3 waittrk: Start waittrk 5 2009-Apr-14 19:56:31 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-14 19:56:31 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-14 19:56:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-14 19:56:36 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-14 19:56:36 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-14 19:56:36 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-14 19:57:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-14 19:57:11 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-14 19:57:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-14 19:57:11 INFO2 waittrk: Now tracking drift94p1 2009-Apr-14 19:57:11 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 4.38 2009-Apr-14 19:57:11 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-14 19:57:11 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-14 19:57:11 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-14 19:57:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:57:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-14 19:57:11 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-14 19:57:11 START begin_task: Starting task 'selecting calibration type' 2009-Apr-14 19:57:11 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-14 19:57:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-14 19:57:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-14 19:57:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:57:11 START begin_task: Starting task 'waiting on setcal' 2009-Apr-14 19:57:11 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-14 19:57:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-14 19:57:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:57:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-14 19:57:12 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-14 19:57:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 19:57:12 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-14 19:57:12 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 19:57:12 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:57:12 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 19:57:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 19:57:12 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 19:57:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-14 19:57:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 19:57:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:57:12 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 19:57:12 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 19:57:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 19:57:12 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 19:57:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 19:57:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-14 19:57:12 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG5 dopset_later: Calling 'dopset_later 15.407057195652419' 2009-Apr-14 19:57:12 INFO3 dopset_later: Setting Doppler correction for 19:57:26 (15.4 seconds from now) 2009-Apr-14 19:57:12 LOG5 antvel: Calling 'antvel 180.000000 4.360876 F Topocentric 15.407057195652419' 2009-Apr-14 19:57:12 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.36 to apparent RA = 09:03:33.6 Dec = +22:42:52.9 2009-Apr-14 19:57:12 LOG2 antvel: Parameters to Doppler: Topocentric 86246 2009 104 0.0 2009-Apr-14 19:57:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 19:57:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-14 19:57:12 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-14 19:57:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-14 19:57:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-14 19:57:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:57:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:57:12 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 19:57:12 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-14 19:57:12 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-14 19:57:12 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-14 19:57:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-14 19:57:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:57:12 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-14 19:57:12 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:57:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 19:57:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:57:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 19:57:15 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-14 19:57:15 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-14 19:57:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-14 19:57:15 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 19:57:15 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-14 19:57:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-14 19:57:15 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:57:15 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:57:15 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:57:15 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 19:57:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-14 19:57:15 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-14 19:57:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-14 19:57:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 19:57:16 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-14 19:57:16 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-14 19:57:16 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-14 19:57:16 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-14 19:57:16 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-14 19:57:16 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-14 19:57:16 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-14 19:57:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.981 1.056 ALFA beam 1: 0.997 1.020 2009-Apr-14 19:57:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.942 0.908 ALFA beam 3: 1.015 1.096 2009-Apr-14 19:57:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.010 1.092 ALFA beam 5: 0.994 0.972 2009-Apr-14 19:57:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.056 0.102 ALFA beam 7: 0.940 0.125 2009-Apr-14 19:57:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 19:57:16 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-14 19:57:16 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-14 19:57:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:57:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 19:57:16 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-14 19:57:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-14 19:57:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 19:57:16 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-14 19:57:16 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-14 19:57:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 19:57:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 19:57:16 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-14 19:57:16 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:03:33.6 LST = 09:03:22.2 diff = 11.4 secs 2009-Apr-14 19:57:16 INFO2 fixed_driftmap: Waiting 9.4 seconds for RA 9:03:34 2009-Apr-14 19:57:16 INFO2 lstwait: Waiting for 9.4 secs from LST 09:03:22 to LST 09:03:32 ... 2009-Apr-14 19:57:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9.4130679918142857 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-14 19:57:16 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-14 19:57:16 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-14 19:57:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 19:57:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 1.056 0.997 1.020 2009-Apr-14 19:57:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.908 1.015 1.096 2009-Apr-14 19:57:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.092 0.994 0.972 2009-Apr-14 19:57:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.102 0.940 0.125 2009-Apr-14 19:57:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-14 19:57:25 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-14 19:57:25 LOG4 lstwait: Finished waiting 0.59 seconds late 2009-Apr-14 19:57:25 INFO3 lstwait: Finished waiting 2009-Apr-14 19:57:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-14 19:57:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:57:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:57:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:57:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 19:57:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-14 19:57:26 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-14 19:57:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-14 19:57:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-14 19:57:26 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 19:57:26 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-14 19:57:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-14 19:57:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 19:57:26 INFO2 take_data: Starting WAPP 600-second scan: 910400228 2009-Apr-14 19:57:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 19:57:26 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-14 19:57:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 19:57:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 19:57:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-14 19:57:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86247.00 2009-Apr-14 19:57:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20090414.a2010.0018.fits 2009-Apr-14 19:57:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090414.a2010.0018.fits} 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 19:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 19:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 19:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 19:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 19:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 19:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 19:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 19:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 19:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 19:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 19:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 19:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 19:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 19:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 19:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 19:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 19:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 19:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 19:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 19:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 19:58:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 19:58:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 1.057 1.000 1.020 2009-Apr-14 19:58:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.905 1.012 1.090 2009-Apr-14 19:58:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.093 0.997 0.981 2009-Apr-14 19:58:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.102 0.940 0.126 2009-Apr-14 19:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 19:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 19:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 19:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-14 19:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 19:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 19:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 19:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 19:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 19:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 19:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 19:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 19:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 19:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 19:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 19:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 19:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-14 19:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 19:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 19:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 19:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 19:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 19:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 19:59:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 19:59:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.056 0.997 1.018 2009-Apr-14 19:59:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.906 1.012 1.089 2009-Apr-14 19:59:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.095 0.994 0.977 2009-Apr-14 19:59:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.102 0.939 0.126 2009-Apr-14 19:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 19:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 19:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 19:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 19:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 19:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 19:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 19:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 19:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 19:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 19:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 19:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 19:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 19:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 20:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 20:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-14 20:00:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:00:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.057 0.998 1.019 2009-Apr-14 20:00:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.905 1.012 1.090 2009-Apr-14 20:00:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.092 0.998 0.973 2009-Apr-14 20:00:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.102 0.942 0.125 2009-Apr-14 20:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 20:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-14 20:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 20:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 20:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.089 (still bad) 2009-Apr-14 20:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.089 (still bad) 2009-Apr-14 20:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 20:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 20:01:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:01:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.057 0.997 1.017 2009-Apr-14 20:01:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.905 1.013 1.091 2009-Apr-14 20:01:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.093 0.995 0.967 2009-Apr-14 20:01:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.102 0.940 0.125 2009-Apr-14 20:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 20:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2009-Apr-14 20:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2009-Apr-14 20:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2009-Apr-14 20:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2009-Apr-14 20:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 20:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2009-Apr-14 20:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2009-Apr-14 20:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2009-Apr-14 20:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2009-Apr-14 20:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2009-Apr-14 20:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 20:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.102 (still bad) 2009-Apr-14 20:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 20:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2009-Apr-14 20:02:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:02:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.063 1.002 1.023 2009-Apr-14 20:02:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.912 1.028 1.106 2009-Apr-14 20:02:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.109 1.001 0.974 2009-Apr-14 20:02:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.102 0.946 0.125 2009-Apr-14 20:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2009-Apr-14 20:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-14 20:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.120 (still bad) 2009-Apr-14 20:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2009-Apr-14 20:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2009-Apr-14 20:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-14 20:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2009-Apr-14 20:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2009-Apr-14 20:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-14 20:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-14 20:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-14 20:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:03:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:03:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.060 1.000 1.019 2009-Apr-14 20:03:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.908 1.014 1.090 2009-Apr-14 20:03:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.095 0.996 0.971 2009-Apr-14 20:03:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.102 0.940 0.125 2009-Apr-14 20:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:04:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:04:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.058 1.003 1.019 2009-Apr-14 20:04:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.911 1.018 1.094 2009-Apr-14 20:04:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.096 0.995 0.968 2009-Apr-14 20:04:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.102 0.941 0.125 2009-Apr-14 20:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-14 20:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-14 20:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-14 20:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 20:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 20:05:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:05:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.060 1.003 1.020 2009-Apr-14 20:05:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.910 1.016 1.090 2009-Apr-14 20:05:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.096 1.015 0.991 2009-Apr-14 20:05:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.102 0.942 0.125 2009-Apr-14 20:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-14 20:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-14 20:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 20:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-14 20:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:06:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:06:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.979 1.060 1.002 1.024 2009-Apr-14 20:06:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.909 1.017 1.092 2009-Apr-14 20:06:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.097 0.995 0.974 2009-Apr-14 20:06:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.102 0.940 0.125 2009-Apr-14 20:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-14 20:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 20:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-14 20:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:07:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:07:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-14 20:07:27 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-14 20:07:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-14 20:07:27 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-14 20:07:27 LOG1 fixed_driftmap: New position: year = 2009.2870321887597 RA = 09:13:03.2 RA/Dec = 09:13:36.7 +22:42:46.8 2009-Apr-14 20:07:27 NOTE fixed_driftmap: Correcting ZA to 4:21:33.1 ... 2009-Apr-14 20:07:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.3592075043 -CF 2009-Apr-14 20:07:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-14 20:07:27 START begin_task: Starting task 'WAPP calibration' 2009-Apr-14 20:07:27 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-14 20:07:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-14 20:07:27 START begin_task: Starting task 'selecting calibration type' 2009-Apr-14 20:07:27 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-14 20:07:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-14 20:07:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-14 20:07:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:07:27 START begin_task: Starting task 'waiting on setcal' 2009-Apr-14 20:07:27 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-14 20:07:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.3592075043 -CF 2009-Apr-14 20:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:07:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-14 20:07:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:07:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 20:07:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-14 20:07:27 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-14 20:07:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-14 20:07:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:07:27 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-14 20:07:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:07:27 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:07:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:07:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:07:28 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:07:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-14 20:07:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:07:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:07:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:07:28 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:07:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:07:28 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:07:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:07:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-14 20:07:28 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-14 20:07:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-14 20:07:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-14 20:07:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:07:28 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:07:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-14 20:07:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:07:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:07:28 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-14 20:07:28 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 20:07:28 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-14 20:07:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 20:07:28 INFO2 take_data: Starting WAPP 1-second scan: 910400229 2009-Apr-14 20:07:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 20:07:28 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-14 20:07:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 20:07:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-14 20:07:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 449.00 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 20:07:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 20:07:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:07:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-14 20:07:30 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-14 20:07:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-14 20:07:30 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-14 20:07:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-14 20:07:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 20:07:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 20:07:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:07:30 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-14 20:07:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:07:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 20:07:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:07:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:07:30 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-14 20:07:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-14 20:07:30 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-14 20:07:30 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-14 20:07:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-14 20:07:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 20:07:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-14 20:07:30 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-14 20:07:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-14 20:07:30 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-14 20:07:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:07:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:07:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:07:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:07:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-14 20:07:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-14 20:07:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 20:07:31 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-14 20:07:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-14 20:07:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 20:07:31 INFO2 take_data: Starting WAPP 600-second scan: 910400230 2009-Apr-14 20:07:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 20:07:31 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-14 20:07:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 20:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.538 (still bad) 2009-Apr-14 20:07:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 20:07:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-14 20:07:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 452.00 2009-Apr-14 20:07:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20090414.a2010.0019.fits 2009-Apr-14 20:07:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090414.a2010.0019.fits} 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 20:07:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:07:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.365 1.446 1.377 1.400 2009-Apr-14 20:07:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.321 1.261 1.420 1.501 2009-Apr-14 20:07:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.430 1.538 1.395 1.302 2009-Apr-14 20:07:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.512 0.102 1.345 0.126 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 20:07:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 20:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 20:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-14 20:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2009-Apr-14 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-14 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-14 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-14 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-14 20:08:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:08:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.062 1.002 1.022 2009-Apr-14 20:08:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.910 1.021 1.093 2009-Apr-14 20:08:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.096 0.995 0.971 2009-Apr-14 20:08:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.102 0.942 0.125 2009-Apr-14 20:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 20:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-14 20:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.099 (still bad) 2009-Apr-14 20:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2009-Apr-14 20:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2009-Apr-14 20:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2009-Apr-14 20:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2009-Apr-14 20:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-14 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2009-Apr-14 20:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:09:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-14 20:09:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.066 1.004 1.024 2009-Apr-14 20:09:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.910 1.020 1.093 2009-Apr-14 20:09:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.104 0.996 0.972 2009-Apr-14 20:09:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.101 0.944 0.125 2009-Apr-14 20:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2009-Apr-14 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:10:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:10:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.081 1.005 1.028 2009-Apr-14 20:10:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.909 1.020 1.090 2009-Apr-14 20:10:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.091 0.994 0.969 2009-Apr-14 20:10:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.102 0.949 0.126 2009-Apr-14 20:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-14 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2009-Apr-14 20:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:11:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:11:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.062 1.002 1.024 2009-Apr-14 20:11:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.909 1.022 1.091 2009-Apr-14 20:11:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.097 1.001 0.973 2009-Apr-14 20:11:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.102 0.944 0.126 2009-Apr-14 20:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-14 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-14 20:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-14 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-14 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:12:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:12:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.060 1.025 1.045 2009-Apr-14 20:12:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.906 1.021 1.088 2009-Apr-14 20:12:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.106 0.995 0.971 2009-Apr-14 20:12:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.102 0.943 0.126 2009-Apr-14 20:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.100 (still bad) 2009-Apr-14 20:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2009-Apr-14 20:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-14 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-14 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-14 20:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:13:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:13:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.059 1.003 1.026 2009-Apr-14 20:13:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.907 1.017 1.088 2009-Apr-14 20:13:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.094 0.993 0.969 2009-Apr-14 20:13:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.945 0.126 2009-Apr-14 20:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-14 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-14 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-14 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:14:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.976 1.059 1.004 1.024 2009-Apr-14 20:14:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.918 1.020 1.089 2009-Apr-14 20:14:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.095 0.994 0.974 2009-Apr-14 20:14:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.102 0.945 0.125 2009-Apr-14 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-14 20:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:15:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:15:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.063 1.003 1.023 2009-Apr-14 20:15:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.909 1.021 1.089 2009-Apr-14 20:15:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.096 0.993 0.975 2009-Apr-14 20:15:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.102 0.971 0.126 2009-Apr-14 20:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-14 20:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:16:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:16:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.064 1.003 1.026 2009-Apr-14 20:16:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.912 1.023 1.092 2009-Apr-14 20:16:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.098 0.994 0.972 2009-Apr-14 20:16:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.102 0.943 0.126 2009-Apr-14 20:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-14 20:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:17:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:17:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-14 20:17:32 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-14 20:17:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-14 20:17:32 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-14 20:17:32 LOG1 fixed_driftmap: New position: year = 2009.2870513600528 RA = 09:23:09.9 RA/Dec = 09:23:43.3 +22:42:41.1 2009-Apr-14 20:17:32 NOTE fixed_driftmap: Correcting ZA to 4:21:27.4 ... 2009-Apr-14 20:17:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.3576001360 -CF 2009-Apr-14 20:17:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-14 20:17:32 START begin_task: Starting task 'WAPP calibration' 2009-Apr-14 20:17:32 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-14 20:17:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-14 20:17:32 START begin_task: Starting task 'selecting calibration type' 2009-Apr-14 20:17:32 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-14 20:17:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-14 20:17:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-14 20:17:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:17:32 START begin_task: Starting task 'waiting on setcal' 2009-Apr-14 20:17:32 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-14 20:17:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.3576001360 -CF 2009-Apr-14 20:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:17:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-14 20:17:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:17:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 20:17:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-14 20:17:32 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-14 20:17:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-14 20:17:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:17:32 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-14 20:17:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:17:32 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-14 20:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:17:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:17:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:17:33 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:17:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-14 20:17:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:17:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:17:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:17:33 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:17:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:17:33 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:17:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:17:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-14 20:17:33 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-14 20:17:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-14 20:17:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-14 20:17:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:17:33 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:17:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-14 20:17:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:17:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:17:33 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-14 20:17:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 20:17:33 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-14 20:17:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 20:17:33 INFO2 take_data: Starting WAPP 1-second scan: 910400231 2009-Apr-14 20:17:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 20:17:33 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-14 20:17:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 20:17:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-14 20:17:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1054.00 2009-Apr-14 20:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 20:17:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 20:17:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:17:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-14 20:17:35 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-14 20:17:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-14 20:17:35 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-14 20:17:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-14 20:17:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 20:17:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 20:17:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:17:35 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-14 20:17:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:17:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 20:17:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:17:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:17:36 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-14 20:17:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-14 20:17:36 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-14 20:17:36 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-14 20:17:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-14 20:17:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 20:17:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-14 20:17:36 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-14 20:17:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-14 20:17:36 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-14 20:17:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:17:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:17:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:17:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:17:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-14 20:17:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-14 20:17:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 20:17:36 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-14 20:17:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-14 20:17:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 20:17:36 INFO2 take_data: Starting WAPP 600-second scan: 910400232 2009-Apr-14 20:17:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 20:17:36 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-14 20:17:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 20:17:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 20:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.545 (still bad) 2009-Apr-14 20:17:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-14 20:17:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1057.00 2009-Apr-14 20:17:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20090414.a2010.0020.fits 2009-Apr-14 20:17:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090414.a2010.0020.fits} 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 20:17:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 20:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.545 (still bad) 2009-Apr-14 20:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:17:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:17:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.979 1.064 1.003 1.026 2009-Apr-14 20:17:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.912 1.025 1.094 2009-Apr-14 20:17:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.100 0.995 0.972 2009-Apr-14 20:17:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.102 0.944 0.125 2009-Apr-14 20:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:18:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.070 1.012 1.032 2009-Apr-14 20:18:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.917 1.029 1.099 2009-Apr-14 20:18:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.106 1.001 0.980 2009-Apr-14 20:18:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.945 0.126 2009-Apr-14 20:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-14 20:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-14 20:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-14 20:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:19:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:19:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.066 1.017 1.037 2009-Apr-14 20:19:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.920 1.032 1.098 2009-Apr-14 20:19:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.108 0.999 0.978 2009-Apr-14 20:19:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.102 0.950 0.126 2009-Apr-14 20:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:20:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:20:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.060 1.006 1.028 2009-Apr-14 20:20:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.913 1.026 1.094 2009-Apr-14 20:20:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.105 0.996 0.978 2009-Apr-14 20:20:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.944 0.126 2009-Apr-14 20:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-14 20:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-14 20:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:21:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:21:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.062 1.006 1.026 2009-Apr-14 20:21:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.913 1.025 1.095 2009-Apr-14 20:21:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.111 0.993 0.976 2009-Apr-14 20:21:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.102 0.944 0.126 2009-Apr-14 20:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-14 20:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-14 20:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-14 20:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-14 20:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-14 20:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:22:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:22:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.060 1.006 1.027 2009-Apr-14 20:22:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.914 1.027 1.095 2009-Apr-14 20:22:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.110 0.996 0.975 2009-Apr-14 20:22:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.946 0.126 2009-Apr-14 20:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-14 20:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-14 20:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:23:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:23:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.976 1.060 1.007 1.027 2009-Apr-14 20:23:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.914 1.025 1.095 2009-Apr-14 20:23:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.110 0.994 0.975 2009-Apr-14 20:23:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.102 0.944 0.126 2009-Apr-14 20:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-14 20:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:24:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:24:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.061 1.008 1.027 2009-Apr-14 20:24:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.914 1.029 1.098 2009-Apr-14 20:24:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.107 0.996 0.977 2009-Apr-14 20:24:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.102 0.944 0.126 2009-Apr-14 20:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-14 20:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-14 20:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-14 20:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:25:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:25:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.058 1.007 1.028 2009-Apr-14 20:25:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.913 1.033 1.099 2009-Apr-14 20:25:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.107 0.994 0.974 2009-Apr-14 20:25:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.102 0.944 0.126 2009-Apr-14 20:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-14 20:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-14 20:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-14 20:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:27:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:27:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.979 1.061 1.007 1.027 2009-Apr-14 20:27:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.916 1.027 1.096 2009-Apr-14 20:27:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.108 0.997 0.979 2009-Apr-14 20:27:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.102 0.944 0.126 2009-Apr-14 20:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-14 20:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-14 20:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-14 20:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-14 20:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-14 20:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-14 20:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:27:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:27:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-14 20:27:37 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-14 20:27:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-14 20:27:37 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-14 20:27:37 LOG1 fixed_driftmap: New position: year = 2009.2870705313458 RA = 09:33:16.7 RA/Dec = 09:33:50.0 +22:42:35.5 2009-Apr-14 20:27:37 NOTE fixed_driftmap: Correcting ZA to 4:21:21.8 ... 2009-Apr-14 20:27:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.3560674704 -CF 2009-Apr-14 20:27:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-14 20:27:37 START begin_task: Starting task 'WAPP calibration' 2009-Apr-14 20:27:37 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-14 20:27:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-14 20:27:37 START begin_task: Starting task 'selecting calibration type' 2009-Apr-14 20:27:37 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-14 20:27:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-14 20:27:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-14 20:27:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:27:37 START begin_task: Starting task 'waiting on setcal' 2009-Apr-14 20:27:37 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-14 20:27:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.3560674704 -CF 2009-Apr-14 20:27:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:27:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-14 20:27:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:27:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:27:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 20:27:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-14 20:27:38 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-14 20:27:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:27:38 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-14 20:27:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:27:38 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:27:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:27:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:27:38 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:27:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-14 20:27:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:27:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:27:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:27:38 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:27:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:27:38 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:27:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:27:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-14 20:27:38 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-14 20:27:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-14 20:27:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-14 20:27:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:27:38 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:27:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-14 20:27:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:27:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:27:38 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-14 20:27:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 20:27:38 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-14 20:27:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 20:27:38 INFO2 take_data: Starting WAPP 1-second scan: 910400233 2009-Apr-14 20:27:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 20:27:38 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-14 20:27:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 20:27:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-14 20:27:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1659.00 2009-Apr-14 20:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 20:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 20:27:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:27:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-14 20:27:40 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-14 20:27:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-14 20:27:40 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-14 20:27:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-14 20:27:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 20:27:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 20:27:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:27:40 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-14 20:27:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:27:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 20:27:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:27:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:27:40 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-14 20:27:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-14 20:27:40 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-14 20:27:40 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-14 20:27:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-14 20:27:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 20:27:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-14 20:27:40 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-14 20:27:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-14 20:27:41 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-14 20:27:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:27:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:27:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:27:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:27:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-14 20:27:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-14 20:27:41 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 20:27:41 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-14 20:27:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-14 20:27:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 20:27:41 INFO2 take_data: Starting WAPP 600-second scan: 910400234 2009-Apr-14 20:27:41 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 20:27:41 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-14 20:27:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 20:27:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 20:27:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-14 20:27:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1662.00 2009-Apr-14 20:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.559 (still bad) 2009-Apr-14 20:27:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20090414.a2010.0021.fits 2009-Apr-14 20:27:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090414.a2010.0021.fits} 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 20:27:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 20:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.508 (still bad) 2009-Apr-14 20:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-14 20:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-14 20:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-14 20:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-14 20:28:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-14 20:28:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 1.063 1.008 1.031 2009-Apr-14 20:28:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.913 1.029 1.098 2009-Apr-14 20:28:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.107 0.998 0.983 2009-Apr-14 20:28:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.103 0.957 0.126 2009-Apr-14 20:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-14 20:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-14 20:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-14 20:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-14 20:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-14 20:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-14 20:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:29:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:29:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.065 1.006 1.028 2009-Apr-14 20:29:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.911 1.028 1.095 2009-Apr-14 20:29:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.105 0.996 0.982 2009-Apr-14 20:29:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.945 0.126 2009-Apr-14 20:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-14 20:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-14 20:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:30:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:30:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.064 1.008 1.028 2009-Apr-14 20:30:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.911 1.030 1.099 2009-Apr-14 20:30:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.103 0.996 0.976 2009-Apr-14 20:30:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.943 0.126 2009-Apr-14 20:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-14 20:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-14 20:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-14 20:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-14 20:31:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:31:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.062 1.009 1.028 2009-Apr-14 20:31:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.913 1.044 1.110 2009-Apr-14 20:31:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.107 0.995 0.977 2009-Apr-14 20:31:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.102 0.944 0.126 2009-Apr-14 20:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-14 20:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-14 20:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-14 20:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-14 20:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-14 20:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-14 20:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-14 20:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-14 20:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-14 20:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-14 20:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-14 20:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:32:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:32:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.063 1.010 1.030 2009-Apr-14 20:32:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.913 1.031 1.099 2009-Apr-14 20:32:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.105 1.001 0.979 2009-Apr-14 20:32:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.945 0.126 2009-Apr-14 20:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-14 20:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-14 20:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-14 20:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-14 20:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-14 20:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-14 20:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-14 20:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-14 20:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-14 20:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:33:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:33:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.063 1.011 1.036 2009-Apr-14 20:33:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.913 1.028 1.099 2009-Apr-14 20:33:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.102 1.000 0.977 2009-Apr-14 20:33:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.102 0.946 0.126 2009-Apr-14 20:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-14 20:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:34:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:34:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.066 1.011 1.032 2009-Apr-14 20:34:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.915 1.027 1.099 2009-Apr-14 20:34:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.104 1.000 0.976 2009-Apr-14 20:34:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.944 0.126 2009-Apr-14 20:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-14 20:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-14 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:35:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:35:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.976 1.066 1.008 1.031 2009-Apr-14 20:35:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.912 1.027 1.100 2009-Apr-14 20:35:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.103 0.999 0.974 2009-Apr-14 20:35:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.102 0.946 0.126 2009-Apr-14 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-14 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-14 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-14 20:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-14 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:36:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:36:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.064 1.023 1.045 2009-Apr-14 20:36:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.911 1.026 1.098 2009-Apr-14 20:36:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.104 0.996 0.977 2009-Apr-14 20:36:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.102 0.945 0.126 2009-Apr-14 20:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-14 20:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-14 20:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-14 20:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-14 20:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-14 20:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-14 20:37:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-14 20:37:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.070 1.010 1.034 2009-Apr-14 20:37:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.913 1.027 1.099 2009-Apr-14 20:37:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.101 1.000 0.978 2009-Apr-14 20:37:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.102 0.945 0.126 2009-Apr-14 20:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-14 20:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-14 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-14 20:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-14 20:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-14 20:37:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:37:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-14 20:37:42 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-14 20:37:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-14 20:37:42 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-14 20:37:42 LOG1 fixed_driftmap: New position: year = 2009.2870897026389 RA = 09:43:23.5 RA/Dec = 09:43:56.7 +22:42:30.3 2009-Apr-14 20:37:42 NOTE fixed_driftmap: Correcting ZA to 4:21:16.6 ... 2009-Apr-14 20:37:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.3546124736 -CF 2009-Apr-14 20:37:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-14 20:37:42 START begin_task: Starting task 'WAPP calibration' 2009-Apr-14 20:37:42 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-14 20:37:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-14 20:37:42 START begin_task: Starting task 'selecting calibration type' 2009-Apr-14 20:37:42 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-14 20:37:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-14 20:37:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-14 20:37:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:37:42 START begin_task: Starting task 'waiting on setcal' 2009-Apr-14 20:37:42 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-14 20:37:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.3546124736 -CF 2009-Apr-14 20:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-14 20:37:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:37:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-14 20:37:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:37:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:37:42 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 20:37:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-14 20:37:42 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-14 20:37:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-14 20:37:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:37:43 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-14 20:37:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:37:43 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:37:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:37:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:37:43 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:37:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-14 20:37:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:37:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:37:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:37:43 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:37:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:37:43 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:37:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:37:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-14 20:37:43 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-14 20:37:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-14 20:37:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-14 20:37:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:37:43 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:37:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-14 20:37:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:37:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:37:43 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-14 20:37:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-14 20:37:43 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-14 20:37:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-14 20:37:43 INFO2 take_data: Starting WAPP 1-second scan: 910400235 2009-Apr-14 20:37:43 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-14 20:37:43 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-14 20:37:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-14 20:37:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-14 20:37:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2264.00 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.630729 MHz 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.674502 MHz 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1636.242000 MHz 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1741.562000 MHz 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1892.318900 MHz 2009-Apr-14 20:37:45 LOG3 WAPP=1+2+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1981.320800 MHz 2009-Apr-14 20:37:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-14 20:37:45 LOG5 wapp_failed: Calling 'wapp_failed 3' 2009-Apr-14 20:37:45 ERROR wapp_failed: ERROR WAPP-3 failed to complete its current task! 2009-Apr-14 20:37:45 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 abort' 2009-Apr-14 20:37:45 START begin_task: Starting task 'handling WAPP failure' 2009-Apr-14 20:37:45 LOG5 begin_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-14 20:37:45 NOTE handle_wapp_failure: Will abort task 'fixed azimuth drift map' since the WAPP failure preference is set to 'abort'! 2009-Apr-14 20:37:45 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2009-Apr-14 20:37:45 LOG1 task_failed: Task 'handling WAPP failure' failed! 2009-Apr-14 20:37:45 LOG5 task_failed: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-14 20:37:45 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2009-Apr-14 20:37:45 LOG5 end_task: Level: (5) ID = <10167> Status = 0 0 0 1 failed 2009-Apr-14 20:37:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'FAILED' 2009-Apr-14 20:37:45 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 1 failed 2009-Apr-14 20:37:45 LOG4 stop_backends: Calling 'stop_backends' 2009-Apr-14 20:37:45 START begin_task: Starting task 'stopping the WAPPs' 2009-Apr-14 20:37:45 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 1 failed 2009-Apr-14 20:37:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Apr-14 20:37:45 INFO1 stop_wapp: Stopping the WAPPs 2009-Apr-14 20:37:45 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Apr-14 20:37:46 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Apr-14 20:37:46 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Apr-14 20:37:46 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Apr-14 20:37:46 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Apr-14 20:37:46 LOG5 begin_task: Level: (5) ID = <10169> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Apr-14 20:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.512 (still bad) 2009-Apr-14 20:37:46 ERROR WAPP=3-read_timeout: ERROR time-out while waiting for data from the correlator! 2009-Apr-14 20:37:46 ERROR WAPP=3-start_spectra: ERROR failed to read spectral line data! 2009-Apr-14 20:37:46 PROBLEM WAPP=3-start_spectra: Reason: Connection timed out! 2009-Apr-14 20:37:46 ERROR WAPP=3-start_spectra: ERROR the correlator has failed to start! 2009-Apr-14 20:37:46 INFO1 WAPP=1+2+3+4-wappcon: Can't abort --- the WAPP isn't running 2009-Apr-14 20:37:46 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2009-Apr-14 20:37:46 LOG5 end_task: Level: (5) ID = <10169> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2009-Apr-14 20:37:46 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'FAILED' 2009-Apr-14 20:37:46 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-14 20:37:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 20:37:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 20:37:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-14 20:37:46 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-14 20:37:46 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 ERROR finish_task: ERROR failed calibration: WAPP calibration 2009-Apr-14 20:37:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2009-Apr-14 20:37:46 STOP end_task: Finishing task 'WAPP calibration' with status 'FAILED' 2009-Apr-14 20:37:46 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-14 20:37:46 LOG5 finish_task: Level: (1) ID = <10108> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2009-Apr-14 20:37:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-14 20:37:46 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2009-Apr-14 20:37:46 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 1 failed 2009-Apr-14 20:37:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:37:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 20:37:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:37:47 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 12 dumps! 2009-Apr-14 20:41:19 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-14 20:41:19 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-14 20:41:19 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-14 20:41:19 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-14 20:41:19 LOG5 begin_task: Level: (1) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-14 20:41:19 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-14 20:41:19 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-14 20:41:19 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-14 20:41:19 LOG5 end_task: Level: (1) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-14 20:41:19 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-14 20:41:19 LOG3 exec_msg: Closing socket 2009-Apr-14 20:41:19 LOG3 exec_msg: Closing socket 2009-Apr-14 20:41:19 LOG3 exec_msg: Closing socket 2009-Apr-14 20:41:19 LOG3 exec_msg: Closing socket 2009-Apr-14 20:41:22 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-14 20:41:22 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-14 20:41:22 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-14 20:41:22 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-14 20:41:33 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-14 20:41:33 LOG2 CIMA-antvel: Precessing RA = 09:03:00.0 Dec = +22:45:06.0 Epoch = 2009.28710 J 2009-Apr-14 20:41:33 LOG2 CIMA-antvel: Computed apparent RA = 09:03:33.6 Dec = +22:42:52.9 2009-Apr-14 20:41:33 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 88893 2009 104 0.0 2009-Apr-14 20:41:33 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-14 20:41:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-14 20:41:35 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-14 20:41:35 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-14 20:41:35 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-14 20:41:35 LOG5 begin_task: Level: (1) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-14 20:41:35 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-14 20:41:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-14 20:41:35 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-14 20:41:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:41:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:41:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:41:35 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-14 20:41:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:41:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:41:35 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-14 20:41:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:41:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:41:35 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-14 20:41:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-14 20:41:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-14 20:41:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-14 20:41:35 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-14 20:41:35 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-14 20:41:35 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-14 20:41:35 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-14 20:41:35 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-14 20:41:35 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-14 20:41:36 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-14 20:41:36 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-14 20:41:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-14 20:41:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-14 20:41:36 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-14 20:41:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-14 20:41:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:41:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-14 20:41:36 LOG5 begin_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-14 20:41:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-14 20:41:36 LOG5 end_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-14 20:41:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-14 20:41:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-14 20:41:36 LOG5 finish_task: Level: (1) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-14 20:41:36 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-14 20:41:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 20:41:36 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-14 20:41:36 LOG5 end_task: Level: (1) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-14 20:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-14 20:41:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-14 20:41:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-14 20:41:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-14 20:41:37 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-14 20:41:37 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-14 20:41:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-14 20:41:37 LOG5 begin_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-14 20:41:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-14 20:41:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-14 20:41:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-14 20:41:37 START begin_task: Starting task 'selecting calibration port' 2009-Apr-14 20:41:37 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-14 20:41:37 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-14 20:41:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-14 20:41:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:41:37 START begin_task: Starting task 'waiting on calport' 2009-Apr-14 20:41:37 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-14 20:41:37 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-14 20:41:37 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-14 20:41:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:41:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 20:41:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-14 20:41:37 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-14 20:41:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-14 20:41:37 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-14 20:41:37 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-14 20:41:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-14 20:41:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-14 20:41:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:41:37 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-14 20:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:41:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:41:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 20:41:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:41:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:41:37 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:41:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:41:37 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-14 20:41:37 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-14 20:41:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-14 20:41:37 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-14 20:41:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-14 20:41:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-14 20:41:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-14 20:41:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 20:41:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-14 20:41:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-14 20:41:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-14 20:41:38 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-14 20:41:38 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-14 20:41:38 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-14 20:41:38 LOG5 finish_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-14 20:41:38 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-14 20:41:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 20:41:38 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-14 20:41:38 LOG5 end_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-14 20:41:38 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-14 20:41:38 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-14 20:41:38 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-14 20:41:38 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-14 20:41:38 LOG5 begin_task: Level: (1) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-14 20:41:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-14 20:41:38 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-14 20:41:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-14 20:41:38 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-14 20:41:38 LOG5 finish_task: Level: (1) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-14 20:41:38 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-14 20:41:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 20:41:38 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-14 20:41:38 LOG5 end_task: Level: (1) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-14 20:41:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-14 20:41:39 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-14 20:41:39 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-14 20:42:15 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-14 20:42:15 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-14 20:42:15 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 20:42:15 LOG5 begin_task: Level: (1) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-14 20:42:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-14 20:42:15 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-14 20:42:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-14 20:42:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-14 20:42:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:42:15 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-14 20:42:15 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-14 20:42:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-14 20:42:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:42:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 20:42:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-14 20:42:18 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-14 20:42:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-14 20:42:18 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-14 20:42:18 LOG5 begin_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-14 20:42:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-14 20:42:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 20:42:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 20:42:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 20:42:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-14 20:42:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-14 20:42:18 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-14 20:42:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-14 20:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:42:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-14 20:42:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-14 20:42:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-14 20:42:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-14 20:42:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-14 20:42:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-14 20:42:19 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-14 20:42:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.982 1.070 ALFA beam 1: 1.017 1.036 2009-Apr-14 20:42:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.952 0.912 ALFA beam 3: 1.014 1.080 2009-Apr-14 20:42:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.012 1.086 ALFA beam 5: 1.000 0.966 2009-Apr-14 20:42:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.048 0.100 ALFA beam 7: 0.938 0.124 2009-Apr-14 20:42:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 20:42:19 LOG5 finish_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-14 20:42:19 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-14 20:42:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 20:42:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 20:42:19 LOG5 end_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-14 20:42:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-14 20:42:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-14 20:42:19 LOG5 finish_task: Level: (1) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-14 20:42:19 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-14 20:42:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-14 20:42:19 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-14 20:42:19 LOG5 end_task: Level: (1) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-14 20:42:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-14 20:42:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.070 1.017 1.036 2009-Apr-14 20:42:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.912 1.014 1.080 2009-Apr-14 20:42:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.086 1.000 0.966 2009-Apr-14 20:42:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.100 0.938 0.124 2009-Apr-14 20:42:24 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2009-Apr-14 20:42:24 LOG4 exec_msg: From OBSERVER: new_file manual 2009-Apr-14 20:42:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:42:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:42:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:42:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Apr-14 20:42:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Apr-14 20:42:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20090414.a2010.0022.fits 2009-Apr-14 20:42:25 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090414.a2010.0022.fits} 2009-Apr-14 20:42:28 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-14 20:42:28 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p1 094800.0 +224506 J 0 Topocentric velocity(optical) 2009-Apr-14 20:42:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p1 094800.0 +224506 J 0 Topocentric velocity(optical)' 2009-Apr-14 20:42:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-14 20:42:28 LOG5 begin_task: Level: (1) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-14 20:42:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift94p1' 2009-Apr-14 20:42:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-14 20:42:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift94p1} 2009-Apr-14 20:42:28 INFO5 fixed_driftmap: Start: year = 2009.287098733744 RA = 09:48:33.1 Dec = +22:42:28.0 2009-Apr-14 20:42:28 NOTE fixed_driftmap: Setting ZA to 4:21:14.3 ... 2009-Apr-14 20:42:28 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.35 2009-Apr-14 20:42:28 LOG3 track_source: Calling 'track_source drift94p1 180.0 4.3539760240 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-14 20:42:28 START begin_task: Starting task 'sending tracking commands' 2009-Apr-14 20:42:28 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-14 20:42:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift94p1} INFO {Slewing to source 'drift94p1' ...} 2009-Apr-14 20:42:28 INFO1 track_source: Starting to track drift94p1 2009-Apr-14 20:42:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift94p1" 2009-Apr-14 20:42:28 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-14 20:42:28 LOG3 vw_send: To DATATAKING: set dec 4.3539760240 2009-Apr-14 20:42:28 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-14 20:42:28 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.3539760240 -CF 2009-Apr-14 20:42:28 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-14 20:42:28 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-14 20:42:28 LOG5 finish_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-14 20:42:28 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-14 20:42:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 20:42:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-14 20:42:28 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-14 20:42:28 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-14 20:42:28 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-14 20:42:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-14 20:42:28 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-14 20:42:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-14 20:42:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-14 20:42:28 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-14 20:42:28 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift94p1" 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: set dec 4.3539760240 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: vw% 4.3539760240 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.3539760240 -CF 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-14 20:42:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:42:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-14 20:42:29 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-14 20:42:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-14 20:42:29 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-14 20:42:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-14 20:42:29 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-14 20:42:29 LOG5 finish_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-14 20:42:29 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-14 20:42:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 20:42:29 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-14 20:42:29 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-14 20:42:29 START begin_task: Starting task 'waiting on telescope' 2009-Apr-14 20:42:29 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-14 20:42:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-14 20:42:29 LOG3 waittrk: Start waittrk 5 2009-Apr-14 20:42:29 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-14 20:42:29 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-14 20:42:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-14 20:42:34 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-14 20:42:34 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-14 20:42:34 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-14 20:42:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-14 20:42:35 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-14 20:42:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-14 20:42:35 INFO2 waittrk: Now tracking drift94p1 2009-Apr-14 20:42:35 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 4.38 2009-Apr-14 20:42:35 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-14 20:42:35 LOG5 finish_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-14 20:42:35 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-14 20:42:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-14 20:42:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-14 20:42:35 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-14 20:42:35 START begin_task: Starting task 'selecting calibration type' 2009-Apr-14 20:42:35 LOG5 begin_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-14 20:42:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-14 20:42:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-14 20:42:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:42:35 START begin_task: Starting task 'waiting on setcal' 2009-Apr-14 20:42:35 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-14 20:42:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-14 20:42:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-14 20:42:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:42:36 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-14 20:42:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-14 20:42:36 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-14 20:42:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-14 20:42:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:42:36 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-14 20:42:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:42:36 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Apr-14 20:42:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:42:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:42:36 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Apr-14 20:42:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:42:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-14 20:42:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-14 20:42:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:42:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-14 20:42:36 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-14 20:42:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-14 20:42:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-14 20:42:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-14 20:42:36 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-14 20:42:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-14 20:42:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-14 20:42:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-14 20:42:36 LOG5 end_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-14 20:42:36 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-14 20:42:36 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-14 20:42:36 LOG5 antvel: Calling 'antvel 180.000000 4.353976 F Topocentric 0' 2009-Apr-14 20:42:36 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.35 to apparent RA = 09:48:49.7 Dec = +22:42:28.0 2009-Apr-14 20:42:36 LOG2 antvel: Parameters to Doppler: Topocentric 88955 2009 104 0.0 2009-Apr-14 20:42:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-14 20:42:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-14 20:42:36 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385