2009-Apr-13 19:51:09 BEGIN executive: CIMA executive starting ... 2009-Apr-13 19:51:09 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-13 19:51:09 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-13 19:51:09 INFO4 executive: This is an ON-LINE session 2009-Apr-13 19:51:09 INFO4 executive: This is a REMOTE session 2009-Apr-13 19:51:09 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-13 19:51:09 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2009-Apr-13 19:51:09 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090413' 2009-Apr-13 19:51:10 LOG2 log_preferences: Currently applied preferences: 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-13 19:51:10 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-13 19:51:10 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-13 19:51:10 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-13 19:51:10 ALERT executive: CIMA executive ready 2009-Apr-13 19:51:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:13 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-13 19:51:14 NOTE frontend: CIMA frontend ready 2009-Apr-13 19:51:17 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-13 19:51:17 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-13 19:51:17 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-13 19:51:17 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-13 19:51:17 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-13 19:51:17 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-13 19:51:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-13 19:51:17 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-13 19:51:17 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-13 19:51:17 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-13 19:51:17 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-13 19:51:17 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-13 19:51:17 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-13 19:51:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:51:17 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-13 19:51:17 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-13 19:51:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-13 19:51:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:32 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-13 19:51:32 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-13 19:51:32 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-13 19:51:32 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-13 19:51:32 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-13 19:51:32 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-13 19:51:32 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-13 19:51:32 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-13 19:51:32 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-13 19:51:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-13 19:51:35 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-13 19:51:35 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-13 19:51:35 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-13 19:51:35 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-13 19:51:41 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-13 19:51:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-13 19:51:43 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-13 19:51:43 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-13 19:51:43 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-13 19:51:43 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-13 19:51:43 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-13 19:51:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-13 19:51:43 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-13 19:51:43 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-13 19:51:44 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-13 19:51:44 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-13 19:51:44 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-13 19:51:44 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-13 19:51:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-13 19:51:44 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-13 19:51:44 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-13 19:51:44 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-13 19:51:44 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-13 19:51:44 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-13 19:51:44 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-13 19:51:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 19:51:44 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-13 19:51:44 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-13 19:51:44 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-13 19:51:44 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-13 19:51:44 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-13 19:51:44 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-13 19:51:44 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-13 19:51:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-13 19:51:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 19:51:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 19:51:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 19:51:44 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-13 19:51:44 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-13 19:51:44 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-13 19:51:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 19:51:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 19:51:45 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-13 19:51:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 19:51:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-13 19:51:45 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-13 19:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-13 19:51:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-13 19:51:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:51:45 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-13 19:51:45 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-13 19:51:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:00 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 19:52:00 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-13 19:52:00 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-13 19:52:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-13 19:52:00 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-13 19:52:00 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-13 19:52:00 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-13 19:52:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:52:00 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-13 19:52:00 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-13 19:52:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-13 19:52:01 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-13 19:52:01 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-13 19:52:01 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-13 19:52:01 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-13 19:52:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-13 19:52:01 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-13 19:52:01 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-13 19:52:01 START begin_task: Starting task 'selecting calibration port' 2009-Apr-13 19:52:01 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-13 19:52:01 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-13 19:52:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-13 19:52:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:52:01 START begin_task: Starting task 'waiting on calport' 2009-Apr-13 19:52:01 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-13 19:52:01 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-13 19:52:01 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-13 19:52:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:01 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 19:52:01 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-13 19:52:01 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-13 19:52:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-13 19:52:01 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-13 19:52:01 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-13 19:52:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 19:52:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 19:52:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 19:52:01 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-13 19:52:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 19:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 19:52:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 19:52:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 19:52:01 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-13 19:52:01 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-13 19:52:01 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-13 19:52:01 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-13 19:52:01 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-13 19:52:01 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-13 19:52:02 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-13 19:52:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 19:52:02 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-13 19:52:02 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 19:52:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 19:52:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 19:52:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 19:52:02 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 19:52:02 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-13 19:52:02 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-13 19:52:02 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-13 19:52:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:52:02 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-13 19:52:02 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-13 19:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 19:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-13 19:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-13 19:52:02 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-13 19:52:02 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-13 19:52:02 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-13 19:52:02 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-13 19:52:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-13 19:52:02 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-13 19:52:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-13 19:52:02 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-13 19:52:02 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-13 19:52:02 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-13 19:52:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:52:02 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-13 19:52:02 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-13 19:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 19:52:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20090413.a2010.0017.fits 2009-Apr-13 19:52:03 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090413.a2010.0017.fits} 2009-Apr-13 19:52:04 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-13 19:52:24 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-13 19:52:24 LOG4 exec_msg: From OBSERVER: track_new_source drift95p1 090200.0 +225942 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-13 19:52:24 LOG1 track_new_source: Calling 'track_new_source drift95p1 090200.0 +225942 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-13 19:52:24 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-13 19:52:24 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-13 19:52:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift95p1} INFO {Selecting source 'drift95p1' ...} 2009-Apr-13 19:52:24 LOG3 track_source: Calling 'track_source drift95p1 090200.0 +225942 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-13 19:52:24 START begin_task: Starting task 'sending tracking commands' 2009-Apr-13 19:52:24 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-13 19:52:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift95p1} INFO {Slewing to source 'drift95p1' ...} 2009-Apr-13 19:52:24 INFO1 track_source: Starting to track drift95p1 2009-Apr-13 19:52:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift95p1" 2009-Apr-13 19:52:24 LOG3 vw_send: To DATATAKING: set ra 090200.0 2009-Apr-13 19:52:24 LOG3 vw_send: To DATATAKING: set dec +225942 2009-Apr-13 19:52:24 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-13 19:52:24 LOG3 vw_send: To DATATAKING: pnt tr 090200.0 +225942 -CJ 2009-Apr-13 19:52:24 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-13 19:52:24 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-13 19:52:24 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-13 19:52:24 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-13 19:52:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 19:52:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-13 19:52:24 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-13 19:52:24 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-13 19:52:24 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-13 19:52:24 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-13 19:52:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-13 19:52:24 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-13 19:52:24 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-13 19:52:24 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-13 19:52:24 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-13 19:52:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 19:52:25 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-13 19:52:25 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-13 19:52:25 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-13 19:52:25 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-13 19:52:25 DONE finish_task: DONE finished selecting: new source 2009-Apr-13 19:52:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:52:25 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-13 19:52:25 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift95p1" 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: set ra 090200.0 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: set dec +225942 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: vw% 090200.0 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: vw% +225942 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: pnt tr 090200.0 +225942 -CJ 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-13 19:52:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:52:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-13 19:52:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-13 19:56:36 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-13 19:56:43 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-13 19:56:43 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-13 19:56:43 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-13 19:56:43 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-13 19:56:43 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-13 19:56:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-13 19:56:43 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-13 19:56:43 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-13 19:56:43 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-13 19:56:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-13 19:56:43 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-13 19:56:43 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-13 19:56:43 LOG2 CIMA-antvel: Precessing RA = 09:02:00.0 Dec = +22:59:42.0 Epoch = 2009.28427 J 2009-Apr-13 19:56:43 LOG2 CIMA-antvel: Computed apparent RA = 09:02:33.7 Dec = +22:57:29.5 2009-Apr-13 19:56:43 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 86203 2009 103 0.0 2009-Apr-13 19:56:43 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-13 19:56:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-13 19:56:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-13 19:56:45 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-13 19:56:45 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-13 19:56:45 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-13 19:56:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-13 19:56:45 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-13 19:56:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 19:56:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 19:56:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 19:56:45 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 19:56:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 19:56:47 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 19:56:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 19:56:47 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-13 19:56:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-13 19:56:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-13 19:56:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-13 19:56:47 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-13 19:56:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-13 19:56:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:56:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-13 19:56:47 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-13 19:56:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-13 19:56:47 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-13 19:56:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-13 19:56:47 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-13 19:56:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:56:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-13 19:56:47 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-13 19:56:47 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-13 19:56:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-13 19:56:47 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-13 19:56:47 START begin_task: Starting task 'selecting calibration port' 2009-Apr-13 19:56:47 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-13 19:56:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-13 19:56:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:56:47 START begin_task: Starting task 'waiting on calport' 2009-Apr-13 19:56:47 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 19:56:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-13 19:56:47 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-13 19:56:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-13 19:56:47 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 19:56:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 19:56:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 19:56:47 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-13 19:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:56:47 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 19:56:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 19:56:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 19:56:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 19:56:47 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 19:56:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 19:56:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-13 19:56:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-13 19:56:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 19:56:48 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 19:56:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 19:56:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 19:56:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 19:56:48 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-13 19:56:48 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-13 19:56:48 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-13 19:56:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:56:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-13 19:56:48 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-13 19:56:48 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-13 19:56:48 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-13 19:56:48 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-13 19:56:48 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-13 19:56:48 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-13 19:56:48 LOG3 track_source: Calling 'track_source galfasrc 090000.0 +225942 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-13 19:56:48 START begin_task: Starting task 'sending tracking commands' 2009-Apr-13 19:56:48 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-13 19:56:48 INFO1 track_source: Starting to track galfasrc 2009-Apr-13 19:56:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-13 19:56:48 LOG3 vw_send: To DATATAKING: set ra 090000.0 2009-Apr-13 19:56:48 LOG3 vw_send: To DATATAKING: set dec +225942 2009-Apr-13 19:56:48 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-13 19:56:48 LOG3 vw_send: To DATATAKING: pnt tr 090000.0 +225942 -CJ 2009-Apr-13 19:56:48 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-13 19:56:48 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-13 19:56:48 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-13 19:56:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 19:56:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-13 19:56:48 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-13 19:56:48 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-13 19:56:48 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-13 19:56:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:56:49 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-13 19:56:49 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-13 19:56:49 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-13 19:56:49 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-13 19:56:49 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-13 19:56:49 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-13 19:56:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-13 19:56:49 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-13 19:56:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-13 19:56:49 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-13 19:56:49 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-13 19:56:49 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-13 19:56:49 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-13 19:56:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-13 19:56:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-13 19:56:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: set ra 090000.0 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: set dec +225942 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: vw% 090000.0 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: vw% +225942 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: pnt tr 090000.0 +225942 -CJ 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-13 19:56:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:56:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-13 19:56:50 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-13 19:56:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-13 19:56:50 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-13 19:56:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-13 19:56:50 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-13 19:56:50 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-13 19:56:50 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-13 19:56:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:56:50 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-13 19:56:50 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-13 19:56:50 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-13 19:56:50 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-13 19:56:50 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-13 19:56:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-13 19:56:50 LOG3 waittrk: Start waittrk 5 2009-Apr-13 19:56:50 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-13 19:56:50 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-13 19:56:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-13 19:56:55 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-13 19:56:55 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-13 19:56:55 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-13 19:57:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-13 19:57:14 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-13 19:57:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-13 19:57:14 INFO2 waittrk: Now tracking galfasrc 2009-Apr-13 19:57:14 LOG4 waittrk: Current telescope position: Az = 182.98 ZA = 4.63 2009-Apr-13 19:57:14 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-13 19:57:14 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-13 19:57:14 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-13 19:57:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 19:57:14 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-13 19:57:14 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-13 19:57:14 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-13 19:57:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-13 19:57:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-13 19:57:15 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-13 19:57:15 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-13 19:57:15 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-13 19:57:15 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-13 19:57:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-13 19:57:15 START begin_task: Starting task 'selecting calibration type' 2009-Apr-13 19:57:15 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-13 19:57:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-13 19:57:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:57:15 START begin_task: Starting task 'waiting on setcal' 2009-Apr-13 19:57:15 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-13 19:57:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:57:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 19:57:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-13 19:57:15 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-13 19:57:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 19:57:15 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-13 19:57:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 19:57:15 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 19:57:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 19:57:15 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 19:57:15 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-13 19:57:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 19:57:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 19:57:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 19:57:15 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 19:57:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 19:57:15 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 19:57:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 19:57:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-13 19:57:15 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-13 19:57:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 19:57:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 19:57:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 19:57:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 19:57:15 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090413.a2010.0017.fits' is empty! 2009-Apr-13 19:57:16 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-13 19:57:16 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-13 19:57:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-13 19:57:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 19:57:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 19:57:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 19:57:16 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-13 19:57:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 19:57:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 19:57:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 19:57:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 19:57:16 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-13 19:57:16 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-13 19:57:16 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-13 19:57:16 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-13 19:57:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-13 19:57:16 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-13 19:57:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-13 19:57:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-13 19:57:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:57:16 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-13 19:57:16 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-13 19:57:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-13 19:57:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 19:57:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 19:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 19:57:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-13 19:57:19 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-13 19:57:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-13 19:57:19 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-13 19:57:19 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-13 19:57:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-13 19:57:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 19:57:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 19:57:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 19:57:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 19:57:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-13 19:57:19 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-13 19:57:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-13 19:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-13 19:57:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-13 19:57:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-13 19:57:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-13 19:57:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-13 19:57:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-13 19:57:20 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-13 19:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.969 1.057 ALFA beam 1: 1.001 1.019 2009-Apr-13 19:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.944 0.899 ALFA beam 3: 1.002 1.044 2009-Apr-13 19:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.000 1.070 ALFA beam 5: 0.984 0.956 2009-Apr-13 19:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.046 0.099 ALFA beam 7: 0.940 0.122 2009-Apr-13 19:57:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-13 19:57:20 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-13 19:57:20 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-13 19:57:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 19:57:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-13 19:57:20 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-13 19:57:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-13 19:57:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-13 19:57:20 LOG5 finish_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-13 19:57:20 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-13 19:57:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 19:57:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-13 19:57:20 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-13 19:57:20 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-13 19:57:20 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-13 19:57:20 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-13 19:57:20 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:57:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:57:20 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:57:20 LOG2 antvel: Parameters to Doppler: Topocentric 86239 2009 103 0.0 2009-Apr-13 19:57:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:57:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-13 19:57:20 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-13 19:57:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:57:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:57:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 19:57:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-13 19:57:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:57:20 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-13 19:57:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-13 19:57:20 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 8.991572 2009.2842750716152 18.999933 2009-Apr-13 19:57:20 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999881 22.995000000000005 2009-Apr-13 19:57:20 LOG4 log_alfabeam: ALFABEAM 1 9.000829609013486 22.889502191332017 2009-Apr-13 19:57:20 LOG4 log_alfabeam: ALFABEAM 2 9.006064584745886 22.954943304912391 2009-Apr-13 19:57:20 LOG4 log_alfabeam: ALFABEAM 3 9.005333781614143 23.060624354863613 2009-Apr-13 19:57:20 LOG4 log_alfabeam: ALFABEAM 4 8.999111634917139 23.100472969541649 2009-Apr-13 19:57:20 LOG4 log_alfabeam: ALFABEAM 5 8.993831710760219 23.033458717554105 2009-Apr-13 19:57:20 LOG4 log_alfabeam: ALFABEAM 6 8.994818515254336 22.928197383888147 2009-Apr-13 19:57:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300257 2009-Apr-13 19:57:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:57:21 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-13 19:57:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:57:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 19:57:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-13 19:57:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86242.00 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:57:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:57:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-13 19:57:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.057 1.001 1.019 2009-Apr-13 19:57:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.899 1.002 1.044 2009-Apr-13 19:57:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.000 1.070 0.984 0.956 2009-Apr-13 19:57:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.099 0.940 0.122 2009-Apr-13 19:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2009-Apr-13 19:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2009-Apr-13 19:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 19:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 19:57:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:57:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:57:32 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-13 19:57:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:57:32 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-13 19:57:32 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-13 19:57:32 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-13 19:57:32 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-13 19:57:32 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:57:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:57:32 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:57:32 LOG2 antvel: Parameters to Doppler: Topocentric 86252 2009 103 0.0 2009-Apr-13 19:57:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:57:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-13 19:57:32 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-13 19:57:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:57:32 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:57:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 19:57:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-13 19:57:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:57:32 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-13 19:57:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-13 19:57:32 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 8.995193 2009.2842754835604 18.999933 2009-Apr-13 19:57:32 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999780 22.995000000000012 2009-Apr-13 19:57:32 LOG4 log_alfabeam: ALFABEAM 1 9.000914914820518 22.889636875913311 2009-Apr-13 19:57:32 LOG4 log_alfabeam: ALFABEAM 2 9.006096631378314 22.955881846914441 2009-Apr-13 19:57:32 LOG4 log_alfabeam: ALFABEAM 3 9.005280329942456 23.061443544534818 2009-Apr-13 19:57:32 LOG4 log_alfabeam: ALFABEAM 4 8.999026190385631 23.100329186545522 2009-Apr-13 19:57:32 LOG4 log_alfabeam: ALFABEAM 5 8.993800937803446 23.032503445081005 2009-Apr-13 19:57:32 LOG4 log_alfabeam: ALFABEAM 6 8.994872967408250 22.927401196454603 2009-Apr-13 19:57:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300258 2009-Apr-13 19:57:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:57:33 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-13 19:57:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:57:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 19:57:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 19:57:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-13 19:57:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86254.00 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:57:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 19:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-13 19:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 19:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 19:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 19:57:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:57:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:57:44 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-13 19:57:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:57:44 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-13 19:57:44 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-13 19:57:44 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-13 19:57:44 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-13 19:57:44 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:57:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:57:44 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:57:44 LOG2 antvel: Parameters to Doppler: Topocentric 86264 2009 103 0.0 2009-Apr-13 19:57:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:57:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-13 19:57:44 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-13 19:57:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:57:44 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:57:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 19:57:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-13 19:57:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:57:44 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-13 19:57:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-13 19:57:44 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 8.998536 2009.2842758638174 18.999933 2009-Apr-13 19:57:44 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999849 22.994999999999990 2009-Apr-13 19:57:44 LOG4 log_alfabeam: ALFABEAM 1 9.000993642602143 22.889773031963294 2009-Apr-13 19:57:44 LOG4 log_alfabeam: ALFABEAM 2 9.006125572595097 22.956753525969230 2009-Apr-13 19:57:44 LOG4 log_alfabeam: ALFABEAM 3 9.005230342906980 23.062193193904072 2009-Apr-13 19:57:44 LOG4 log_alfabeam: ALFABEAM 4 8.998947347688736 23.100184604965207 2009-Apr-13 19:57:44 LOG4 log_alfabeam: ALFABEAM 5 8.993773197822332 23.031616645551328 2009-Apr-13 19:57:44 LOG4 log_alfabeam: ALFABEAM 6 8.994923844897270 22.926673067286753 2009-Apr-13 19:57:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300259 2009-Apr-13 19:57:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:57:45 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-13 19:57:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 19:57:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:57:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-13 19:57:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86266.00 2009-Apr-13 19:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:57:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 19:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 19:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 19:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 19:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 19:57:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:57:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:57:56 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-13 19:57:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:57:56 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-13 19:57:56 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-13 19:57:56 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-13 19:57:56 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-13 19:57:56 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:57:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:57:56 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:57:56 LOG2 antvel: Parameters to Doppler: Topocentric 86276 2009 103 0.0 2009-Apr-13 19:57:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:57:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-13 19:57:56 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-13 19:57:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:57:56 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:57:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 19:57:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-13 19:57:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:57:56 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-13 19:57:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-13 19:57:56 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.001878 2009.2842762440744 18.999933 2009-Apr-13 19:57:56 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999682 22.995000000000005 2009-Apr-13 19:57:56 LOG4 log_alfabeam: ALFABEAM 1 9.001072294022634 22.889920466283534 2009-Apr-13 19:57:56 LOG4 log_alfabeam: ALFABEAM 2 9.006153875251627 22.957629662661702 2009-Apr-13 19:57:56 LOG4 log_alfabeam: ALFABEAM 3 9.005179771972237 23.062935981689645 2009-Apr-13 19:57:56 LOG4 log_alfabeam: ALFABEAM 4 8.998868594117033 23.100028728371779 2009-Apr-13 19:57:56 LOG4 log_alfabeam: ALFABEAM 5 8.993746119649950 23.030725715716478 2009-Apr-13 19:57:56 LOG4 log_alfabeam: ALFABEAM 6 8.994975273497612 22.925952052598117 2009-Apr-13 19:57:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300260 2009-Apr-13 19:57:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:57:57 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-13 19:57:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:57:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 19:57:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:57:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:57:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-13 19:57:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86278.00 2009-Apr-13 19:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:57:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-13 19:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2009-Apr-13 19:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-13 19:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-13 19:58:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:58:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:58:08 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-13 19:58:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:58:08 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-13 19:58:08 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-13 19:58:08 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-13 19:58:08 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-13 19:58:08 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:58:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:58:08 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:58:08 LOG2 antvel: Parameters to Doppler: Topocentric 86287 2009 103 0.0 2009-Apr-13 19:58:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:58:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-13 19:58:08 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-13 19:58:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:58:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:58:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 19:58:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-13 19:58:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:58:08 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-13 19:58:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-13 19:58:08 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.004942 2009.2842765926434 18.999933 2009-Apr-13 19:58:08 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999567 22.995000000000001 2009-Apr-13 19:58:08 LOG4 log_alfabeam: ALFABEAM 1 9.001144335546952 22.890065558411177 2009-Apr-13 19:58:08 LOG4 log_alfabeam: ALFABEAM 2 9.006179261622869 22.958436839871357 2009-Apr-13 19:58:08 LOG4 log_alfabeam: ALFABEAM 3 9.005132894097079 23.063610940677435 2009-Apr-13 19:58:08 LOG4 log_alfabeam: ALFABEAM 4 8.998796470198789 23.099875883779287 2009-Apr-13 19:58:08 LOG4 log_alfabeam: ALFABEAM 5 8.993721876031509 23.029905267857593 2009-Apr-13 19:58:08 LOG4 log_alfabeam: ALFABEAM 6 8.995022908622671 22.925297272139389 2009-Apr-13 19:58:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300261 2009-Apr-13 19:58:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:58:09 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-13 19:58:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:58:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 19:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-13 19:58:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-13 19:58:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86290.00 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-13 19:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-13 19:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-13 19:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.094 (still bad) 2009-Apr-13 19:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-13 19:58:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:58:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:58:20 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-13 19:58:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:58:20 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-13 19:58:20 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-13 19:58:20 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-13 19:58:20 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-13 19:58:20 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:58:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:58:20 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:58:20 LOG2 antvel: Parameters to Doppler: Topocentric 86300 2009 103 0.0 2009-Apr-13 19:58:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:58:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-13 19:58:20 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-13 19:58:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:58:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:58:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 19:58:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-13 19:58:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:58:20 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-13 19:58:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-13 19:58:20 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.008563 2009.2842770045884 18.999933 2009-Apr-13 19:58:20 LOG4 log_alfabeam: ALFABEAM 0 8.999999999990361 22.994999999999905 2009-Apr-13 19:58:20 LOG4 log_alfabeam: ALFABEAM 1 9.001229363714248 22.890249223205814 2009-Apr-13 19:58:20 LOG4 log_alfabeam: ALFABEAM 2 9.006208559646661 22.959395298333746 2009-Apr-13 19:58:20 LOG4 log_alfabeam: ALFABEAM 3 9.005076877399855 23.064400889904640 2009-Apr-13 19:58:20 LOG4 log_alfabeam: ALFABEAM 4 8.998711358602907 23.099683047556795 2009-Apr-13 19:58:20 LOG4 log_alfabeam: ALFABEAM 5 8.993693952476976 23.028931496485590 2009-Apr-13 19:58:20 LOG4 log_alfabeam: ALFABEAM 6 8.995079783755461 22.924531422176472 2009-Apr-13 19:58:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300262 2009-Apr-13 19:58:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:58:21 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-13 19:58:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:58:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 19:58:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-13 19:58:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-13 19:58:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86302.00 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:58:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-13 19:58:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-13 19:58:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.057 0.995 1.015 2009-Apr-13 19:58:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.896 1.010 1.061 2009-Apr-13 19:58:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.005 1.090 0.972 0.959 2009-Apr-13 19:58:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.101 0.946 0.125 2009-Apr-13 19:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-13 19:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-13 19:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-13 19:58:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:58:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:58:32 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-13 19:58:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:58:32 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-13 19:58:32 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-13 19:58:32 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-13 19:58:32 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-13 19:58:32 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:58:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:58:32 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:58:32 LOG2 antvel: Parameters to Doppler: Topocentric 86312 2009 103 0.0 2009-Apr-13 19:58:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:58:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-13 19:58:32 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-13 19:58:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:58:32 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:58:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 19:58:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-13 19:58:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:58:32 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-13 19:58:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-13 19:58:32 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.011906 2009.2842773848456 18.999933 2009-Apr-13 19:58:32 LOG4 log_alfabeam: ALFABEAM 0 9.000000000001048 22.995000000000005 2009-Apr-13 19:58:32 LOG4 log_alfabeam: ALFABEAM 1 9.001307732953601 22.890430468312413 2009-Apr-13 19:58:32 LOG4 log_alfabeam: ALFABEAM 2 9.006234922720960 22.960284260679941 2009-Apr-13 19:58:32 LOG4 log_alfabeam: ALFABEAM 3 9.005024584415130 23.065122533586145 2009-Apr-13 19:58:32 LOG4 log_alfabeam: ALFABEAM 4 8.998632925855166 23.099493331369956 2009-Apr-13 19:58:32 LOG4 log_alfabeam: ALFABEAM 5 8.993668880647579 23.028028762230377 2009-Apr-13 19:58:32 LOG4 log_alfabeam: ALFABEAM 6 8.995132833719694 22.923832256036967 2009-Apr-13 19:58:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300263 2009-Apr-13 19:58:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:58:33 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-13 19:58:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:58:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 19:58:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-13 19:58:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86314.00 2009-Apr-13 19:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:58:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-13 19:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-13 19:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.089 (still bad) 2009-Apr-13 19:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-13 19:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.090 (still bad) 2009-Apr-13 19:58:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:58:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:58:44 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-13 19:58:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:58:44 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-13 19:58:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-13 19:58:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-13 19:58:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-13 19:58:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 19:58:44 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-13 19:58:44 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 19:58:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-13 19:58:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 19:58:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 19:58:44 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-13 19:58:44 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-13 19:58:44 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-13 19:58:44 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-13 19:58:44 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:58:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:58:44 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:58:44 LOG2 antvel: Parameters to Doppler: Topocentric 86324 2009 103 0.0 2009-Apr-13 19:58:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:58:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-13 19:58:44 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-13 19:58:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:58:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:58:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 19:58:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-13 19:58:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:58:44 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-13 19:58:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-13 19:58:44 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.015248 2009.2842777651026 18.999933 2009-Apr-13 19:58:44 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000306 22.995000000000005 2009-Apr-13 19:58:44 LOG4 log_alfabeam: ALFABEAM 1 9.001385928045961 22.890622809875389 2009-Apr-13 19:58:44 LOG4 log_alfabeam: ALFABEAM 2 9.006260611504727 22.961176598213363 2009-Apr-13 19:58:44 LOG4 log_alfabeam: ALFABEAM 3 9.004971770110814 23.065836379993275 2009-Apr-13 19:58:44 LOG4 log_alfabeam: ALFABEAM 4 8.998554680232003 23.099292523060480 2009-Apr-13 19:58:44 LOG4 log_alfabeam: ALFABEAM 5 8.993644503293103 23.027123016277883 2009-Apr-13 19:58:44 LOG4 log_alfabeam: ALFABEAM 6 8.995186370133990 22.923141085257281 2009-Apr-13 19:58:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300264 2009-Apr-13 19:58:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:58:45 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-13 19:58:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:58:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 19:58:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-13 19:58:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86326.00 2009-Apr-13 19:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.091 (still bad) 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.562 (still bad) 2009-Apr-13 19:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.557 (still bad) 2009-Apr-13 19:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-13 19:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.561 (still bad) 2009-Apr-13 19:58:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:58:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:58:56 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-13 19:58:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:58:56 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-13 19:58:56 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-13 19:58:56 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-13 19:58:56 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-13 19:58:56 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:58:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:58:56 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:58:56 LOG2 antvel: Parameters to Doppler: Topocentric 86336 2009 103 0.0 2009-Apr-13 19:58:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:58:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-13 19:58:56 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-13 19:58:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:58:56 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:58:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 19:58:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-13 19:58:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:58:56 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-13 19:58:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-13 19:58:56 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.018590 2009.2842781453596 18.999933 2009-Apr-13 19:58:56 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000089 22.995000000000001 2009-Apr-13 19:58:56 LOG4 log_alfabeam: ALFABEAM 1 9.001463948283165 22.890826232518364 2009-Apr-13 19:58:56 LOG4 log_alfabeam: ALFABEAM 2 9.006285626195995 22.962072297818032 2009-Apr-13 19:58:56 LOG4 log_alfabeam: ALFABEAM 3 9.004918435691632 23.066542426978209 2009-Apr-13 19:58:56 LOG4 log_alfabeam: ALFABEAM 4 8.998476622462396 23.099080640747559 2009-Apr-13 19:58:56 LOG4 log_alfabeam: ALFABEAM 5 8.993620819614300 23.026214275620219 2009-Apr-13 19:58:56 LOG4 log_alfabeam: ALFABEAM 6 8.995240391617751 22.922457904367054 2009-Apr-13 19:58:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300265 2009-Apr-13 19:58:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:58:57 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-13 19:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.560 (still bad) 2009-Apr-13 19:58:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:58:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 19:58:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:58:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:58:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-13 19:58:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86338.00 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.559 (still bad) 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:58:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.559 (still bad) 2009-Apr-13 19:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.559 (still bad) 2009-Apr-13 19:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.559 (still bad) 2009-Apr-13 19:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.560 (still bad) 2009-Apr-13 19:59:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:59:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:59:08 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-13 19:59:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:59:08 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-13 19:59:08 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-13 19:59:08 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-13 19:59:08 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-13 19:59:08 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:59:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:59:08 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:59:08 LOG2 antvel: Parameters to Doppler: Topocentric 86348 2009 103 0.0 2009-Apr-13 19:59:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:59:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-13 19:59:08 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-13 19:59:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:59:08 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:59:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 19:59:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-13 19:59:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:59:08 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-13 19:59:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-13 19:59:08 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.021933 2009.2842785256166 18.999933 2009-Apr-13 19:59:08 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000087 22.995000000000005 2009-Apr-13 19:59:08 LOG4 log_alfabeam: ALFABEAM 1 9.001541792923092 22.891040723981746 2009-Apr-13 19:59:08 LOG4 log_alfabeam: ALFABEAM 2 9.006309967140806 22.962971347576858 2009-Apr-13 19:59:08 LOG4 log_alfabeam: ALFABEAM 3 9.004864582205604 23.067240670487983 2009-Apr-13 19:59:08 LOG4 log_alfabeam: ALFABEAM 4 8.998398753285892 23.098857699424933 2009-Apr-13 19:59:08 LOG4 log_alfabeam: ALFABEAM 5 8.993597828980610 23.025302556024037 2009-Apr-13 19:59:08 LOG4 log_alfabeam: ALFABEAM 6 8.995294896941228 22.921782709814703 2009-Apr-13 19:59:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300266 2009-Apr-13 19:59:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:59:09 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-13 19:59:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:59:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 19:59:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.563 (still bad) 2009-Apr-13 19:59:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-13 19:59:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86350.00 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:59:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.563 (still bad) 2009-Apr-13 19:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-13 19:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-13 19:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.561 (still bad) 2009-Apr-13 19:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.557 (still bad) 2009-Apr-13 19:59:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:59:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:59:20 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-13 19:59:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:59:20 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-13 19:59:20 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-13 19:59:20 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-13 19:59:20 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-13 19:59:20 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:59:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:59:20 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:59:20 LOG2 antvel: Parameters to Doppler: Topocentric 86360 2009 103 0.0 2009-Apr-13 19:59:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:59:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-13 19:59:20 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-13 19:59:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:59:20 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:59:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 19:59:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-13 19:59:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:59:20 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-13 19:59:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-13 19:59:20 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.025275 2009.2842789058739 18.999933 2009-Apr-13 19:59:20 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000171 22.995000000000001 2009-Apr-13 19:59:20 LOG4 log_alfabeam: ALFABEAM 1 9.001619391619935 22.891266067864986 2009-Apr-13 19:59:20 LOG4 log_alfabeam: ALFABEAM 2 9.006333613357446 22.963872925874224 2009-Apr-13 19:59:20 LOG4 log_alfabeam: ALFABEAM 3 9.004810259539880 23.067930488774032 2009-Apr-13 19:59:20 LOG4 log_alfabeam: ALFABEAM 4 8.998321143054339 23.098623925781094 2009-Apr-13 19:59:20 LOG4 log_alfabeam: ALFABEAM 5 8.993575550630982 23.024388693783546 2009-Apr-13 19:59:20 LOG4 log_alfabeam: ALFABEAM 6 8.995349835494732 22.921116094847498 2009-Apr-13 19:59:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300267 2009-Apr-13 19:59:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:59:21 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-13 19:59:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:59:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 19:59:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-13 19:59:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86362.00 2009-Apr-13 19:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-13 19:59:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 19:59:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.368 1.461 1.394 1.405 2009-Apr-13 19:59:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.326 1.261 1.445 1.480 2009-Apr-13 19:59:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.451 1.552 1.409 1.311 2009-Apr-13 19:59:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.534 0.102 1.366 0.126 2009-Apr-13 19:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.551 (still bad) 2009-Apr-13 19:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.551 (still bad) 2009-Apr-13 19:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.552 (still bad) 2009-Apr-13 19:59:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:59:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:59:32 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-13 19:59:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:59:32 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-13 19:59:32 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-13 19:59:32 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-13 19:59:32 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-13 19:59:32 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:59:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:59:32 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:59:32 LOG2 antvel: Parameters to Doppler: Topocentric 86372 2009 103 0.0 2009-Apr-13 19:59:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:59:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-13 19:59:32 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-13 19:59:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:59:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:59:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 19:59:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-13 19:59:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:59:32 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-13 19:59:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-13 19:59:32 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.028618 2009.2842792861309 18.999933 2009-Apr-13 19:59:32 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000107 22.995000000000005 2009-Apr-13 19:59:32 LOG4 log_alfabeam: ALFABEAM 1 9.001696767287456 22.891502301077526 2009-Apr-13 19:59:32 LOG4 log_alfabeam: ALFABEAM 2 9.006356573275147 22.964777286454098 2009-Apr-13 19:59:32 LOG4 log_alfabeam: ALFABEAM 3 9.004755453269835 23.068612098596276 2009-Apr-13 19:59:32 LOG4 log_alfabeam: ALFABEAM 4 8.998243768818009 23.098379283058179 2009-Apr-13 19:59:32 LOG4 log_alfabeam: ALFABEAM 5 8.993553976054654 23.023472434408855 2009-Apr-13 19:59:32 LOG4 log_alfabeam: ALFABEAM 6 8.995405221784585 22.920457841721070 2009-Apr-13 19:59:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300268 2009-Apr-13 19:59:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:59:33 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-13 19:59:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 19:59:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:59:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86374.00 2009-Apr-13 19:59:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-13 19:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.551 (still bad) 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-13 19:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.536 (still bad) 2009-Apr-13 19:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.541 (still bad) 2009-Apr-13 19:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-13 19:59:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.540 (still bad) 2009-Apr-13 19:59:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:59:44 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-13 19:59:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:59:44 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-13 19:59:44 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-13 19:59:44 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-13 19:59:44 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-13 19:59:44 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:59:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:59:44 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:59:44 LOG2 antvel: Parameters to Doppler: Topocentric 86384 2009 103 0.0 2009-Apr-13 19:59:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:59:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-13 19:59:44 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-13 19:59:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:59:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:59:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 19:59:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-13 19:59:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:59:44 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-13 19:59:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-13 19:59:44 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.031960 2009.2842796663879 18.999933 2009-Apr-13 19:59:44 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000171 22.995000000000005 2009-Apr-13 19:59:44 LOG4 log_alfabeam: ALFABEAM 1 9.001773850416425 22.891749174747201 2009-Apr-13 19:59:44 LOG4 log_alfabeam: ALFABEAM 2 9.006378828089344 22.965683601091126 2009-Apr-13 19:59:44 LOG4 log_alfabeam: ALFABEAM 3 9.004700214641851 23.069284904497344 2009-Apr-13 19:59:44 LOG4 log_alfabeam: ALFABEAM 4 8.998166700043070 23.098124030304604 2009-Apr-13 19:59:44 LOG4 log_alfabeam: ALFABEAM 5 8.993533122309787 23.022554619338287 2009-Apr-13 19:59:44 LOG4 log_alfabeam: ALFABEAM 6 8.995461003977946 22.919808516933259 2009-Apr-13 19:59:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300269 2009-Apr-13 19:59:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:59:45 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-13 19:59:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:59:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 19:59:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-13 19:59:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86386.00 2009-Apr-13 19:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.540 (still bad) 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:59:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 19:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.539 (still bad) 2009-Apr-13 19:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-13 19:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.536 (still bad) 2009-Apr-13 19:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.535 (still bad) 2009-Apr-13 19:59:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 19:59:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 19:59:56 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-13 19:59:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 19:59:56 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-13 19:59:56 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-13 19:59:56 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-13 19:59:56 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-13 19:59:56 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 19:59:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 19:59:56 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 19:59:56 LOG2 antvel: Parameters to Doppler: Topocentric 86396 2009 103 0.0 2009-Apr-13 19:59:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 19:59:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-13 19:59:56 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-13 19:59:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 19:59:56 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 19:59:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 19:59:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-13 19:59:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 19:59:56 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-13 19:59:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-13 19:59:56 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.035303 2009.2842800466449 18.999933 2009-Apr-13 19:59:56 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000032 22.994999999999997 2009-Apr-13 19:59:56 LOG4 log_alfabeam: ALFABEAM 1 9.001850664239674 22.892006719609011 2009-Apr-13 19:59:56 LOG4 log_alfabeam: ALFABEAM 2 9.006400386705161 22.966592123831671 2009-Apr-13 19:59:56 LOG4 log_alfabeam: ALFABEAM 3 9.004644529411824 23.069949129923391 2009-Apr-13 19:59:56 LOG4 log_alfabeam: ALFABEAM 4 8.998089913445966 23.097858136858537 2009-Apr-13 19:59:56 LOG4 log_alfabeam: ALFABEAM 5 8.993512980397410 23.021634993222012 2009-Apr-13 19:59:56 LOG4 log_alfabeam: ALFABEAM 6 8.995517196449898 22.919167896008201 2009-Apr-13 19:59:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300270 2009-Apr-13 19:59:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 19:59:57 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-13 19:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.537 (still bad) 2009-Apr-13 19:59:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 19:59:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 19:59:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 19:59:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 19:59:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-13 19:59:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86398.00 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 19:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.536 (still bad) 2009-Apr-13 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.536 (still bad) 2009-Apr-13 20:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.533 (still bad) 2009-Apr-13 20:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-13 20:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.537 (still bad) 2009-Apr-13 20:00:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:00:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:00:08 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-13 20:00:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:00:08 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-13 20:00:08 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-13 20:00:08 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-13 20:00:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-13 20:00:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 20:00:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 20:00:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:00:08 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-13 20:00:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:00:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:00:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:00:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:00:08 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-13 20:00:08 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-13 20:00:08 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-13 20:00:08 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-13 20:00:08 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-13 20:00:08 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:00:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:00:08 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:00:08 LOG2 antvel: Parameters to Doppler: Topocentric 86408 2009 103 0.0 2009-Apr-13 20:00:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:00:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-13 20:00:08 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-13 20:00:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:00:08 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:00:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 20:00:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-13 20:00:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:00:08 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-13 20:00:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-13 20:00:08 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.038645 2009.2842804269019 18.999933 2009-Apr-13 20:00:08 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000036 22.995000000000005 2009-Apr-13 20:00:08 LOG4 log_alfabeam: ALFABEAM 1 9.001927140278893 22.892274655449437 2009-Apr-13 20:00:08 LOG4 log_alfabeam: ALFABEAM 2 9.006421232471508 22.967502022333235 2009-Apr-13 20:00:08 LOG4 log_alfabeam: ALFABEAM 3 9.004588450017550 23.070604207152801 2009-Apr-13 20:00:08 LOG4 log_alfabeam: ALFABEAM 4 8.998013477415181 23.097581892944266 2009-Apr-13 20:00:08 LOG4 log_alfabeam: ALFABEAM 5 8.993493565175221 23.020714400095983 2009-Apr-13 20:00:08 LOG4 log_alfabeam: ALFABEAM 6 8.995573746311676 22.918536517411596 2009-Apr-13 20:00:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300271 2009-Apr-13 20:00:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:00:09 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-13 20:00:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:00:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 20:00:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.536 (still bad) 2009-Apr-13 20:00:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-13 20:00:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10.00 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:00:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:00:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:00:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:00:20 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-13 20:00:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:00:20 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-13 20:00:20 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-13 20:00:20 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-13 20:00:20 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-13 20:00:20 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:00:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:00:20 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:00:20 LOG2 antvel: Parameters to Doppler: Topocentric 86420 2009 103 0.0 2009-Apr-13 20:00:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:00:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-13 20:00:20 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-13 20:00:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:00:20 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:00:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 20:00:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-13 20:00:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:00:20 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-13 20:00:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-13 20:00:20 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.041988 2009.2842808071591 18.999933 2009-Apr-13 20:00:20 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000071 22.995000000000005 2009-Apr-13 20:00:20 LOG4 log_alfabeam: ALFABEAM 1 9.002003302163939 22.892553007513719 2009-Apr-13 20:00:20 LOG4 log_alfabeam: ALFABEAM 2 9.006441374768780 22.968413552061637 2009-Apr-13 20:00:20 LOG4 log_alfabeam: ALFABEAM 3 9.004531962313962 23.071250366791713 2009-Apr-13 20:00:20 LOG4 log_alfabeam: ALFABEAM 4 8.997937368254830 23.097295273283304 2009-Apr-13 20:00:20 LOG4 log_alfabeam: ALFABEAM 5 8.993474867161135 23.019792582614521 2009-Apr-13 20:00:20 LOG4 log_alfabeam: ALFABEAM 6 8.995630667887545 22.917914149552750 2009-Apr-13 20:00:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300272 2009-Apr-13 20:00:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:00:21 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-13 20:00:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:00:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 20:00:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22.00 2009-Apr-13 20:00:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-13 20:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:00:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:00:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.086 1.030 1.036 2009-Apr-13 20:00:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.912 1.055 1.086 2009-Apr-13 20:00:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.116 1.025 0.992 2009-Apr-13 20:00:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.102 0.966 0.126 2009-Apr-13 20:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:00:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:00:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:00:32 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-13 20:00:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:00:32 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-13 20:00:32 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-13 20:00:32 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-13 20:00:32 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-13 20:00:32 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:00:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:00:32 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:00:32 LOG2 antvel: Parameters to Doppler: Topocentric 86432 2009 103 0.0 2009-Apr-13 20:00:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:00:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-13 20:00:32 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-13 20:00:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:00:32 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:00:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 20:00:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-13 20:00:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:00:32 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-13 20:00:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-13 20:00:32 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.045330 2009.2842811874161 18.999933 2009-Apr-13 20:00:32 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000060 22.995000000000012 2009-Apr-13 20:00:32 LOG4 log_alfabeam: ALFABEAM 1 9.002079082628933 22.892841465599634 2009-Apr-13 20:00:32 LOG4 log_alfabeam: ALFABEAM 2 9.006460799111990 22.969325879047940 2009-Apr-13 20:00:32 LOG4 log_alfabeam: ALFABEAM 3 9.004475119756895 23.071887070068076 2009-Apr-13 20:00:32 LOG4 log_alfabeam: ALFABEAM 4 8.997861653094338 23.096998597872144 2009-Apr-13 20:00:32 LOG4 log_alfabeam: ALFABEAM 5 8.993456899008772 23.018870384882721 2009-Apr-13 20:00:32 LOG4 log_alfabeam: ALFABEAM 6 8.995687907406335 22.917301301813659 2009-Apr-13 20:00:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300273 2009-Apr-13 20:00:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:00:33 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-13 20:00:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:00:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 20:00:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-13 20:00:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34.00 2009-Apr-13 20:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:00:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:00:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:00:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:00:44 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-13 20:00:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:00:44 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-13 20:00:44 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-13 20:00:44 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-13 20:00:44 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-13 20:00:44 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:00:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:00:44 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:00:44 LOG2 antvel: Parameters to Doppler: Topocentric 86444 2009 103 0.0 2009-Apr-13 20:00:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:00:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-13 20:00:44 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-13 20:00:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:00:44 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:00:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 20:00:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-13 20:00:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:00:44 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-13 20:00:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-13 20:00:44 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.048673 2009.2842815676731 18.999933 2009-Apr-13 20:00:44 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000068 22.995000000000001 2009-Apr-13 20:00:44 LOG4 log_alfabeam: ALFABEAM 1 9.002154505771662 22.893140050272990 2009-Apr-13 20:00:44 LOG4 log_alfabeam: ALFABEAM 2 9.006479515347781 22.970239261273584 2009-Apr-13 20:00:44 LOG4 log_alfabeam: ALFABEAM 3 9.004417908218077 23.072514555070235 2009-Apr-13 20:00:44 LOG4 log_alfabeam: ALFABEAM 4 8.997786307756250 23.096691845979453 2009-Apr-13 20:00:44 LOG4 log_alfabeam: ALFABEAM 5 8.993439650768883 23.017947546454987 2009-Apr-13 20:00:44 LOG4 log_alfabeam: ALFABEAM 6 8.995745479223503 22.916697735255394 2009-Apr-13 20:00:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300274 2009-Apr-13 20:00:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:00:45 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-13 20:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:00:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:00:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 20:00:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-13 20:00:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 46.00 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:00:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-13 20:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:00:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:00:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:00:56 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-13 20:00:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:00:56 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-13 20:00:56 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-13 20:00:56 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-13 20:00:56 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-13 20:00:56 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:00:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:00:56 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:00:56 LOG2 antvel: Parameters to Doppler: Topocentric 86456 2009 103 0.0 2009-Apr-13 20:00:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:00:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-13 20:00:56 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-13 20:00:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:00:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:00:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 20:00:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-13 20:00:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:00:56 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-13 20:00:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-13 20:00:56 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.052015 2009.2842819479301 18.999933 2009-Apr-13 20:00:56 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000028 22.994999999999997 2009-Apr-13 20:00:56 LOG4 log_alfabeam: ALFABEAM 1 9.002229505709151 22.893448422896572 2009-Apr-13 20:00:56 LOG4 log_alfabeam: ALFABEAM 2 9.006497511154674 22.971152865601702 2009-Apr-13 20:00:56 LOG4 log_alfabeam: ALFABEAM 3 9.004360381993077 23.073132312948506 2009-Apr-13 20:00:56 LOG4 log_alfabeam: ALFABEAM 4 8.997711397943197 23.096375365772349 2009-Apr-13 20:00:56 LOG4 log_alfabeam: ALFABEAM 5 8.993423132905189 23.017024909025636 2009-Apr-13 20:00:56 LOG4 log_alfabeam: ALFABEAM 6 8.995803328862603 22.916103929363281 2009-Apr-13 20:00:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300275 2009-Apr-13 20:00:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:00:57 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-13 20:00:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:00:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 20:00:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:00:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:00:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-13 20:00:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 58.00 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:00:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-13 20:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-13 20:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.101 (still bad) 2009-Apr-13 20:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2009-Apr-13 20:01:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:01:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:01:08 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-13 20:01:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:01:08 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-13 20:01:08 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-13 20:01:08 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-13 20:01:08 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-13 20:01:08 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:01:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:01:08 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:01:08 LOG2 antvel: Parameters to Doppler: Topocentric 86468 2009 103 0.0 2009-Apr-13 20:01:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:01:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-13 20:01:08 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-13 20:01:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:01:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:01:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 20:01:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-13 20:01:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:01:08 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-13 20:01:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-13 20:01:08 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.055357 2009.2842823281871 18.999933 2009-Apr-13 20:01:08 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000002 22.994999999999990 2009-Apr-13 20:01:08 LOG4 log_alfabeam: ALFABEAM 1 9.002304084817469 22.893766503662885 2009-Apr-13 20:01:08 LOG4 log_alfabeam: ALFABEAM 2 9.006514791761580 22.972066680147293 2009-Apr-13 20:01:08 LOG4 log_alfabeam: ALFABEAM 3 9.004302544236280 23.073740408942065 2009-Apr-13 20:01:08 LOG4 log_alfabeam: ALFABEAM 4 8.997636921153648 23.096049239135063 2009-Apr-13 20:01:08 LOG4 log_alfabeam: ALFABEAM 5 8.993407339644103 23.016102483947169 2009-Apr-13 20:01:08 LOG4 log_alfabeam: ALFABEAM 6 8.995861453361837 22.915519811090160 2009-Apr-13 20:01:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300276 2009-Apr-13 20:01:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:01:09 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-13 20:01:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:01:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 20:01:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-13 20:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-13 20:01:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 70.00 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:01:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-13 20:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-13 20:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-13 20:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.096 (still bad) 2009-Apr-13 20:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-13 20:01:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:01:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:01:20 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-13 20:01:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:01:20 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-13 20:01:20 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-13 20:01:20 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-13 20:01:20 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-13 20:01:20 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:01:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:01:20 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:01:20 LOG2 antvel: Parameters to Doppler: Topocentric 86480 2009 103 0.0 2009-Apr-13 20:01:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:01:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-13 20:01:20 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-13 20:01:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:01:20 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:01:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 20:01:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-13 20:01:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:01:20 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-13 20:01:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-13 20:01:20 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.058700 2009.2842827084444 18.999933 2009-Apr-13 20:01:20 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000041 22.995000000000019 2009-Apr-13 20:01:20 LOG4 log_alfabeam: ALFABEAM 1 9.002378245504966 22.894094217067519 2009-Apr-13 20:01:20 LOG4 log_alfabeam: ALFABEAM 2 9.006531362182017 22.972980695313158 2009-Apr-13 20:01:20 LOG4 log_alfabeam: ALFABEAM 3 9.004244397850462 23.074338906345172 2009-Apr-13 20:01:20 LOG4 log_alfabeam: ALFABEAM 4 8.997562874854900 23.095713543600173 2009-Apr-13 20:01:20 LOG4 log_alfabeam: ALFABEAM 5 8.993392265437086 23.015180280250910 2009-Apr-13 20:01:20 LOG4 log_alfabeam: ALFABEAM 6 8.995919850011250 22.914945309489607 2009-Apr-13 20:01:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300277 2009-Apr-13 20:01:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:01:21 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-13 20:01:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:01:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 20:01:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-13 20:01:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82.00 2009-Apr-13 20:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.097 (still bad) 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.095 (still bad) 2009-Apr-13 20:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.092 (still bad) 2009-Apr-13 20:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.098 (still bad) 2009-Apr-13 20:01:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-13 20:01:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.055 0.992 1.015 2009-Apr-13 20:01:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.895 1.004 1.061 2009-Apr-13 20:01:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.003 1.095 0.962 0.957 2009-Apr-13 20:01:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.101 0.948 0.125 2009-Apr-13 20:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-13 20:01:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:01:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:01:32 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-13 20:01:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:01:32 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-13 20:01:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-13 20:01:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-13 20:01:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-13 20:01:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:01:32 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-13 20:01:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:01:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-13 20:01:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:01:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:01:32 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-13 20:01:32 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-13 20:01:32 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-13 20:01:32 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-13 20:01:32 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:01:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:01:32 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:01:32 LOG2 antvel: Parameters to Doppler: Topocentric 86492 2009 103 0.0 2009-Apr-13 20:01:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:01:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-13 20:01:32 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-13 20:01:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:01:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:01:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 20:01:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-13 20:01:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:01:32 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-13 20:01:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-13 20:01:32 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.062042 2009.2842830887014 18.999933 2009-Apr-13 20:01:32 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000057 22.995000000000005 2009-Apr-13 20:01:32 LOG4 log_alfabeam: ALFABEAM 1 9.002451924250593 22.894431185115547 2009-Apr-13 20:01:32 LOG4 log_alfabeam: ALFABEAM 2 9.006547213298408 22.973894083679614 2009-Apr-13 20:01:32 LOG4 log_alfabeam: ALFABEAM 3 9.004185998052563 23.074927342475664 2009-Apr-13 20:01:32 LOG4 log_alfabeam: ALFABEAM 4 8.997489322326182 23.095368666214863 2009-Apr-13 20:01:32 LOG4 log_alfabeam: ALFABEAM 5 8.993377917523777 23.014259131540580 2009-Apr-13 20:01:32 LOG4 log_alfabeam: ALFABEAM 6 8.995978463609656 22.914380858207053 2009-Apr-13 20:01:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300278 2009-Apr-13 20:01:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:01:33 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-13 20:01:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:01:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-13 20:01:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-13 20:01:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 94.00 2009-Apr-13 20:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.093 (still bad) 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:01:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.562 (still bad) 2009-Apr-13 20:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.566 (still bad) 2009-Apr-13 20:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.568 (still bad) 2009-Apr-13 20:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.563 (still bad) 2009-Apr-13 20:01:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.564 (still bad) 2009-Apr-13 20:01:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:01:44 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-13 20:01:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:01:44 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-13 20:01:44 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-13 20:01:44 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-13 20:01:44 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-13 20:01:44 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:01:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:01:44 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:01:44 LOG2 antvel: Parameters to Doppler: Topocentric 86504 2009 103 0.0 2009-Apr-13 20:01:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:01:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-13 20:01:44 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-13 20:01:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:01:44 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:01:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 20:01:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-13 20:01:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:01:44 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-13 20:01:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-13 20:01:44 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.065385 2009.2842834689584 18.999933 2009-Apr-13 20:01:44 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000005 22.994999999999997 2009-Apr-13 20:01:44 LOG4 log_alfabeam: ALFABEAM 1 9.002525146567091 22.894777420881628 2009-Apr-13 20:01:44 LOG4 log_alfabeam: ALFABEAM 2 9.006562356014966 22.974807113992235 2009-Apr-13 20:01:44 LOG4 log_alfabeam: ALFABEAM 3 9.004127330387169 23.075505974515853 2009-Apr-13 20:01:44 LOG4 log_alfabeam: ALFABEAM 4 8.997416237944533 23.095014593313547 2009-Apr-13 20:01:44 LOG4 log_alfabeam: ALFABEAM 5 8.993364284918824 23.013338765181842 2009-Apr-13 20:01:44 LOG4 log_alfabeam: ALFABEAM 6 8.996037308948795 22.913826199908041 2009-Apr-13 20:01:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300279 2009-Apr-13 20:01:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:01:45 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-13 20:01:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:01:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-13 20:01:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-13 20:01:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 106.00 2009-Apr-13 20:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.564 (still bad) 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:01:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.565 (still bad) 2009-Apr-13 20:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.563 (still bad) 2009-Apr-13 20:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.569 (still bad) 2009-Apr-13 20:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.561 (still bad) 2009-Apr-13 20:01:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:01:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:01:56 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-13 20:01:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:01:56 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-13 20:01:56 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-13 20:01:56 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-13 20:01:56 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-13 20:01:56 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:01:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:01:56 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:01:56 LOG2 antvel: Parameters to Doppler: Topocentric 86516 2009 103 0.0 2009-Apr-13 20:01:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:01:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-13 20:01:56 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-13 20:01:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:01:56 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:01:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 20:01:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-13 20:01:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:01:56 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-13 20:01:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-13 20:01:56 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.068727 2009.2842838492154 18.999933 2009-Apr-13 20:01:56 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000032 22.995000000000001 2009-Apr-13 20:01:56 LOG4 log_alfabeam: ALFABEAM 1 9.002597850676718 22.895132522535036 2009-Apr-13 20:01:56 LOG4 log_alfabeam: ALFABEAM 2 9.006576783301046 22.975718965486116 2009-Apr-13 20:01:56 LOG4 log_alfabeam: ALFABEAM 3 9.004068450461157 23.076074371062774 2009-Apr-13 20:01:56 LOG4 log_alfabeam: ALFABEAM 4 8.997343683208321 23.094651735413443 2009-Apr-13 20:01:56 LOG4 log_alfabeam: ALFABEAM 5 8.993351372774386 23.012420006560049 2009-Apr-13 20:01:56 LOG4 log_alfabeam: ALFABEAM 6 8.996096330564544 22.913281737359714 2009-Apr-13 20:01:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300280 2009-Apr-13 20:01:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:01:57 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-13 20:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.566 (still bad) 2009-Apr-13 20:01:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:01:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-13 20:01:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:01:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:01:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-13 20:01:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 118.00 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.566 (still bad) 2009-Apr-13 20:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.562 (still bad) 2009-Apr-13 20:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.559 (still bad) 2009-Apr-13 20:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.566 (still bad) 2009-Apr-13 20:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.565 (still bad) 2009-Apr-13 20:02:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:02:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:02:08 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-13 20:02:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:02:08 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-13 20:02:08 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-13 20:02:08 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-13 20:02:08 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-13 20:02:08 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:02:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:02:08 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:02:08 LOG2 antvel: Parameters to Doppler: Topocentric 86528 2009 103 0.0 2009-Apr-13 20:02:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:02:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-13 20:02:08 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-13 20:02:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:02:08 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 20:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-13 20:02:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:02:08 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-13 20:02:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-13 20:02:08 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.072070 2009.2842842294724 18.999933 2009-Apr-13 20:02:08 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000041 22.994999999999997 2009-Apr-13 20:02:08 LOG4 log_alfabeam: ALFABEAM 1 9.002670062728686 22.895496502028529 2009-Apr-13 20:02:08 LOG4 log_alfabeam: ALFABEAM 2 9.006590506417876 22.976629912809003 2009-Apr-13 20:02:08 LOG4 log_alfabeam: ALFABEAM 3 9.004009343545118 23.076632796689555 2009-Apr-13 20:02:08 LOG4 log_alfabeam: ALFABEAM 4 8.997271631849005 23.094280079771334 2009-Apr-13 20:02:08 LOG4 log_alfabeam: ALFABEAM 5 8.993339169766450 23.011502576610052 2009-Apr-13 20:02:08 LOG4 log_alfabeam: ALFABEAM 6 8.996155543559830 22.912747206245530 2009-Apr-13 20:02:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300281 2009-Apr-13 20:02:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:02:09 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-13 20:02:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:02:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-13 20:02:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.564 (still bad) 2009-Apr-13 20:02:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-13 20:02:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 130.00 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:02:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.564 (still bad) 2009-Apr-13 20:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.554 (still bad) 2009-Apr-13 20:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.554 (still bad) 2009-Apr-13 20:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.556 (still bad) 2009-Apr-13 20:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.552 (still bad) 2009-Apr-13 20:02:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:02:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:02:20 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-13 20:02:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:02:20 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-13 20:02:20 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-13 20:02:20 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-13 20:02:20 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-13 20:02:20 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:02:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:02:20 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:02:20 LOG2 antvel: Parameters to Doppler: Topocentric 86540 2009 103 0.0 2009-Apr-13 20:02:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:02:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-13 20:02:20 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-13 20:02:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:02:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:02:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 20:02:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-13 20:02:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:02:20 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-13 20:02:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-13 20:02:20 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.075412 2009.2842846097296 18.999933 2009-Apr-13 20:02:20 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000030 22.994999999999997 2009-Apr-13 20:02:20 LOG4 log_alfabeam: ALFABEAM 1 9.002741722803222 22.895868935748382 2009-Apr-13 20:02:20 LOG4 log_alfabeam: ALFABEAM 2 9.006603520366006 22.977539143985695 2009-Apr-13 20:02:20 LOG4 log_alfabeam: ALFABEAM 3 9.003950065458749 23.077180851391827 2009-Apr-13 20:02:20 LOG4 log_alfabeam: ALFABEAM 4 8.997200143471488 23.093900058289503 2009-Apr-13 20:02:20 LOG4 log_alfabeam: ALFABEAM 5 8.993327679024782 23.010587290395755 2009-Apr-13 20:02:20 LOG4 log_alfabeam: ALFABEAM 6 8.996214892378726 22.912222978469760 2009-Apr-13 20:02:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300282 2009-Apr-13 20:02:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:02:21 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-13 20:02:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:02:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-13 20:02:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-13 20:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.554 (still bad) 2009-Apr-13 20:02:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 142.00 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.554 (still bad) 2009-Apr-13 20:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.542 (still bad) 2009-Apr-13 20:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.541 (still bad) 2009-Apr-13 20:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.546 (still bad) 2009-Apr-13 20:02:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:02:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.339 1.448 1.372 1.398 2009-Apr-13 20:02:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.317 1.255 1.420 1.471 2009-Apr-13 20:02:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.426 1.543 1.370 1.296 2009-Apr-13 20:02:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.518 0.102 1.353 0.126 2009-Apr-13 20:02:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:02:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:02:32 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-13 20:02:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:02:32 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-13 20:02:32 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-13 20:02:32 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-13 20:02:32 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-13 20:02:32 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:02:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28428 J 2009-Apr-13 20:02:32 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:02:32 LOG2 antvel: Parameters to Doppler: Topocentric 86552 2009 103 0.0 2009-Apr-13 20:02:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:02:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-13 20:02:32 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-13 20:02:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:02:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:02:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 20:02:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-13 20:02:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:02:32 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-13 20:02:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-13 20:02:32 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.078755 2009.2842849899866 18.999933 2009-Apr-13 20:02:32 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000046 22.995000000000005 2009-Apr-13 20:02:32 LOG4 log_alfabeam: ALFABEAM 1 9.002812857709664 22.896249835662147 2009-Apr-13 20:02:32 LOG4 log_alfabeam: ALFABEAM 2 9.006615836714458 22.978446940335900 2009-Apr-13 20:02:32 LOG4 log_alfabeam: ALFABEAM 3 9.003890601122626 23.077718806774890 2009-Apr-13 20:02:32 LOG4 log_alfabeam: ALFABEAM 4 8.997129191140308 23.093511657999393 2009-Apr-13 20:02:32 LOG4 log_alfabeam: ALFABEAM 5 8.993316888941248 23.009673861688672 2009-Apr-13 20:02:32 LOG4 log_alfabeam: ALFABEAM 6 8.996274392507631 22.911708783154975 2009-Apr-13 20:02:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300283 2009-Apr-13 20:02:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:02:33 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-13 20:02:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:02:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-13 20:02:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-13 20:02:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 154.00 2009-Apr-13 20:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.545 (still bad) 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:02:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.545 (still bad) 2009-Apr-13 20:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.543 (still bad) 2009-Apr-13 20:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.539 (still bad) 2009-Apr-13 20:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.541 (still bad) 2009-Apr-13 20:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.542 (still bad) 2009-Apr-13 20:02:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:02:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:02:44 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-13 20:02:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:02:44 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-13 20:02:44 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-13 20:02:44 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-13 20:02:44 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-13 20:02:44 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:02:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28429 J 2009-Apr-13 20:02:44 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:02:44 LOG2 antvel: Parameters to Doppler: Topocentric 86564 2009 103 0.0 2009-Apr-13 20:02:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:02:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-13 20:02:44 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-13 20:02:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:02:44 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:02:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 20:02:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-13 20:02:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-13 20:02:44 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-13 20:02:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-13 20:02:44 LOG5 log_alfabeam: Parameters: 9.0 22.995000000000001 9.082097 2009.2842853702437 18.999933 2009-Apr-13 20:02:44 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000028 22.995000000000001 2009-Apr-13 20:02:44 LOG4 log_alfabeam: ALFABEAM 1 9.002883409483427 22.896638758503606 2009-Apr-13 20:02:44 LOG4 log_alfabeam: ALFABEAM 2 9.006627452427109 22.979352500666785 2009-Apr-13 20:02:44 LOG4 log_alfabeam: ALFABEAM 3 9.003831006397924 23.078246294122629 2009-Apr-13 20:02:44 LOG4 log_alfabeam: ALFABEAM 4 8.997058832472881 23.093115330030646 2009-Apr-13 20:02:44 LOG4 log_alfabeam: ALFABEAM 5 8.993306800700511 23.008763093283477 2009-Apr-13 20:02:44 LOG4 log_alfabeam: ALFABEAM 6 8.996333988464004 22.911204961576686 2009-Apr-13 20:02:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910300284 2009-Apr-13 20:02:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-13 20:02:45 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-13 20:02:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:02:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-13 20:02:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-13 20:02:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 166.00 2009-Apr-13 20:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.543 (still bad) 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:02:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.543 (still bad) 2009-Apr-13 20:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.538 (still bad) 2009-Apr-13 20:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.538 (still bad) 2009-Apr-13 20:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.541 (still bad) 2009-Apr-13 20:02:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.541 (still bad) 2009-Apr-13 20:02:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-13 20:02:56 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-13 20:02:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-13 20:02:56 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-13 20:02:56 INFO2 smartfreq: Switching off CAL 2009-Apr-13 20:02:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 20:02:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 20:02:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:02:56 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-13 20:02:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:02:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:02:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:02:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:02:56 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-13 20:02:56 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-13 20:02:56 LOG5 antvel: Calling 'antvel 90000.000000 225942.000000 J Topocentric 0' 2009-Apr-13 20:02:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28429 J 2009-Apr-13 20:02:56 LOG2 antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:02:56 LOG2 antvel: Parameters to Doppler: Topocentric 86576 2009 103 0.0 2009-Apr-13 20:02:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:02:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-13 20:02:56 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-13 20:02:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:02:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:02:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 20:02:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:56 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-13 20:02:56 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-13 20:02:56 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-13 20:02:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 20:02:56 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-13 20:02:56 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-13 20:02:56 NOTE run_command_file: DONE with command file processing 2009-Apr-13 20:02:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-13 20:02:57 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-13 20:02:57 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-13 20:02:57 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-13 20:02:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 20:02:57 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-13 20:02:57 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-13 20:02:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 20:02:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.541 (still bad) 2009-Apr-13 20:03:06 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-13 20:03:06 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-13 20:03:06 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-13 20:03:06 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-13 20:03:06 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-13 20:03:06 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-13 20:03:07 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-13 20:03:07 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-13 20:03:07 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-13 20:03:07 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-13 20:03:07 LOG3 exec_msg: Closing socket 2009-Apr-13 20:03:07 LOG3 exec_msg: Closing socket 2009-Apr-13 20:03:07 LOG3 exec_msg: Closing socket 2009-Apr-13 20:03:07 LOG3 exec_msg: Closing socket 2009-Apr-13 20:03:09 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-13 20:03:09 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-13 20:03:09 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-13 20:03:09 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-13 20:03:15 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-13 20:03:15 LOG2 CIMA-antvel: Precessing RA = 09:00:00.0 Dec = +22:59:42.0 Epoch = 2009.28429 J 2009-Apr-13 20:03:15 LOG2 CIMA-antvel: Computed apparent RA = 09:00:33.7 Dec = +22:57:30.7 2009-Apr-13 20:03:15 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 86595 2009 103 0.0 2009-Apr-13 20:03:16 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-13 20:03:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-13 20:03:17 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-13 20:03:17 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-13 20:03:17 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-13 20:03:17 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-13 20:03:17 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-13 20:03:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-13 20:03:17 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-13 20:03:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:03:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:03:17 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:03:17 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-13 20:03:17 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:03:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:03:17 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-13 20:03:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:03:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:03:17 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-13 20:03:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-13 20:03:17 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-13 20:03:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-13 20:03:17 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-13 20:03:17 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-13 20:03:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-13 20:03:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:03:17 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-13 20:03:17 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-13 20:03:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 20:03:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-13 20:03:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:03:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:03:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:18 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-13 20:03:18 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-13 20:03:18 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-13 20:03:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-13 20:03:18 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-13 20:03:18 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-13 20:03:18 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-13 20:03:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 20:03:18 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-13 20:03:18 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-13 20:03:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-13 20:03:18 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-13 20:03:18 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-13 20:03:18 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-13 20:03:18 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-13 20:03:19 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-13 20:03:19 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-13 20:03:19 START begin_task: Starting task 'selecting calibration port' 2009-Apr-13 20:03:19 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-13 20:03:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-13 20:03:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:03:19 START begin_task: Starting task 'waiting on calport' 2009-Apr-13 20:03:19 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-13 20:03:19 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-13 20:03:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:03:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:03:19 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-13 20:03:19 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-13 20:03:19 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-13 20:03:19 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 20:03:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 20:03:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:03:19 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:03:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:03:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:03:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:03:19 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:19 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-13 20:03:19 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-13 20:03:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:03:19 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-13 20:03:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-13 20:03:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:03:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 20:03:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:03:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:03:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:03:19 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-13 20:03:19 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-13 20:03:19 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-13 20:03:19 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-13 20:03:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 20:03:20 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-13 20:03:20 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-13 20:03:20 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-13 20:03:20 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-13 20:03:20 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-13 20:03:20 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-13 20:03:20 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-13 20:03:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-13 20:03:20 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-13 20:03:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-13 20:03:20 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-13 20:03:20 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-13 20:03:20 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-13 20:03:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 20:03:20 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-13 20:03:20 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-13 20:03:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-13 20:03:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-13 20:03:21 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-13 20:03:33 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-13 20:03:33 LOG4 exec_msg: From OBSERVER: track_new_source drift95p1 090500.0 +225942 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-13 20:03:33 LOG1 track_new_source: Calling 'track_new_source drift95p1 090500.0 +225942 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-13 20:03:33 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-13 20:03:33 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift95p1} INFO {Selecting source 'drift95p1' ...} 2009-Apr-13 20:03:33 LOG3 track_source: Calling 'track_source drift95p1 090500.0 +225942 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-13 20:03:33 START begin_task: Starting task 'sending tracking commands' 2009-Apr-13 20:03:33 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift95p1} INFO {Slewing to source 'drift95p1' ...} 2009-Apr-13 20:03:33 INFO1 track_source: Starting to track drift95p1 2009-Apr-13 20:03:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift95p1" 2009-Apr-13 20:03:33 LOG3 vw_send: To DATATAKING: set ra 090500.0 2009-Apr-13 20:03:33 LOG3 vw_send: To DATATAKING: set dec +225942 2009-Apr-13 20:03:33 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-13 20:03:33 LOG3 vw_send: To DATATAKING: pnt tr 090500.0 +225942 -CJ 2009-Apr-13 20:03:33 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-13 20:03:33 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-13 20:03:33 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-13 20:03:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:03:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-13 20:03:33 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-13 20:03:33 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-13 20:03:33 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-13 20:03:33 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-13 20:03:33 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-13 20:03:33 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-13 20:03:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:03:33 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-13 20:03:33 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-13 20:03:33 LOG5 finish_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 DONE finish_task: DONE finished selecting: new source 2009-Apr-13 20:03:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 20:03:33 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-13 20:03:33 LOG5 end_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift95p1" 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: set ra 090500.0 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: set dec +225942 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: vw% 090500.0 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: vw% +225942 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: pnt tr 090500.0 +225942 -CJ 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-13 20:03:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:03:44 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2009-Apr-13 20:03:44 LOG4 exec_msg: From OBSERVER: new_file manual 2009-Apr-13 20:03:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 20:03:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 20:03:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20090413.a2010.0018.fits 2009-Apr-13 20:03:45 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090413.a2010.0018.fits} 2009-Apr-13 20:04:04 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-13 20:04:04 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-13 20:04:04 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-13 20:04:04 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-13 20:04:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-13 20:04:04 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-13 20:04:04 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-13 20:04:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-13 20:04:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:04:04 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-13 20:04:04 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-13 20:04:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-13 20:04:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:04:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:04:07 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-13 20:04:07 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-13 20:04:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-13 20:04:07 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-13 20:04:07 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-13 20:04:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-13 20:04:07 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:07 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:07 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:07 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:07 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-13 20:04:07 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-13 20:04:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-13 20:04:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:08 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-13 20:04:08 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-13 20:04:08 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-13 20:04:08 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-13 20:04:08 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-13 20:04:08 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-13 20:04:08 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-13 20:04:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.962 1.063 ALFA beam 1: 1.012 1.030 2009-Apr-13 20:04:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.948 0.906 ALFA beam 3: 1.005 1.047 2009-Apr-13 20:04:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.004 1.076 ALFA beam 5: 0.982 0.956 2009-Apr-13 20:04:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.041 0.099 ALFA beam 7: 0.935 0.122 2009-Apr-13 20:04:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-13 20:04:08 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-13 20:04:08 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-13 20:04:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:04:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-13 20:04:08 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-13 20:04:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-13 20:04:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-13 20:04:08 LOG5 finish_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-13 20:04:08 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-13 20:04:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-13 20:04:08 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-13 20:04:08 LOG5 end_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-13 20:04:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-13 20:04:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.063 1.012 1.030 2009-Apr-13 20:04:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.906 1.005 1.047 2009-Apr-13 20:04:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 1.076 0.982 0.956 2009-Apr-13 20:04:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.099 0.935 0.122 2009-Apr-13 20:04:17 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-13 20:04:17 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift95p1 090500.0 +225942 J 0 Topocentric velocity(optical) 2009-Apr-13 20:04:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift95p1 090500.0 +225942 J 0 Topocentric velocity(optical)' 2009-Apr-13 20:04:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-13 20:04:17 LOG5 begin_task: Level: (1) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-13 20:04:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift95p1' 2009-Apr-13 20:04:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-13 20:04:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift95p1} 2009-Apr-13 20:04:17 INFO5 fixed_driftmap: Start: year = 2009.2842882855477 RA = 09:05:33.7 Dec = +22:57:27.7 2009-Apr-13 20:04:17 NOTE fixed_driftmap: Setting ZA to 4:36:14.0 ... 2009-Apr-13 20:04:17 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.60 2009-Apr-13 20:04:17 LOG3 track_source: Calling 'track_source drift95p1 180.0 4.6038847471 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-13 20:04:17 START begin_task: Starting task 'sending tracking commands' 2009-Apr-13 20:04:17 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-13 20:04:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift95p1} INFO {Slewing to source 'drift95p1' ...} 2009-Apr-13 20:04:17 INFO1 track_source: Starting to track drift95p1 2009-Apr-13 20:04:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift95p1" 2009-Apr-13 20:04:17 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-13 20:04:17 LOG3 vw_send: To DATATAKING: set dec 4.6038847471 2009-Apr-13 20:04:17 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-13 20:04:17 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.6038847471 -CF 2009-Apr-13 20:04:17 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-13 20:04:17 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-13 20:04:17 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-13 20:04:17 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-13 20:04:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:04:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-13 20:04:17 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-13 20:04:17 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-13 20:04:17 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-13 20:04:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-13 20:04:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-13 20:04:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-13 20:04:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-13 20:04:17 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-13 20:04:17 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift95p1" 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: set dec 4.6038847471 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: vw% 4.6038847471 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.6038847471 -CF 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-13 20:04:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:18 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-13 20:04:18 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-13 20:04:18 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-13 20:04:18 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-13 20:04:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-13 20:04:18 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-13 20:04:18 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-13 20:04:18 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-13 20:04:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:04:18 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-13 20:04:18 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-13 20:04:18 START begin_task: Starting task 'waiting on telescope' 2009-Apr-13 20:04:18 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-13 20:04:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-13 20:04:18 LOG3 waittrk: Start waittrk 5 2009-Apr-13 20:04:18 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-13 20:04:18 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-13 20:04:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-13 20:04:23 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-13 20:04:23 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-13 20:04:23 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-13 20:04:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-13 20:04:38 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-13 20:04:39 INFO2 waittrk: Now tracking drift95p1 2009-Apr-13 20:04:39 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 4.63 2009-Apr-13 20:04:39 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-13 20:04:39 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-13 20:04:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:04:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-13 20:04:39 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 START begin_task: Starting task 'selecting calibration type' 2009-Apr-13 20:04:39 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-13 20:04:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-13 20:04:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:04:39 START begin_task: Starting task 'waiting on setcal' 2009-Apr-13 20:04:39 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:04:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-13 20:04:39 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-13 20:04:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:04:39 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-13 20:04:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:04:39 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:04:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:04:39 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:04:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-13 20:04:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:04:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:04:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:04:39 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:04:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:04:39 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:04:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:04:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-13 20:04:39 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-13 20:04:39 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-13 20:04:39 LOG5 antvel: Calling 'antvel 180.000000 4.603885 F Topocentric 0' 2009-Apr-13 20:04:39 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.60 to apparent RA = 09:06:50.9 Dec = +22:57:27.7 2009-Apr-13 20:04:39 LOG2 antvel: Parameters to Doppler: Topocentric 86679 2009 103 0.0 2009-Apr-13 20:04:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-13 20:04:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-13 20:04:39 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-13 20:04:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-13 20:04:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-13 20:04:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 20:04:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:04:39 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-13 20:04:39 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-13 20:04:39 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-13 20:04:39 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-13 20:04:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-13 20:04:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:04:39 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-13 20:04:39 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-13 20:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:40 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:04:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-13 20:04:40 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-13 20:04:40 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-13 20:04:40 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-13 20:04:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-13 20:04:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-13 20:04:40 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-13 20:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:04:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-13 20:04:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-13 20:04:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-13 20:04:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-13 20:04:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-13 20:04:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-13 20:04:40 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.961 1.068 ALFA beam 1: 1.007 1.024 2009-Apr-13 20:04:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.949 0.911 ALFA beam 3: 1.023 1.074 2009-Apr-13 20:04:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.016 1.102 ALFA beam 5: 0.989 0.975 2009-Apr-13 20:04:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.069 0.102 ALFA beam 7: 0.953 0.125 2009-Apr-13 20:04:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-13 20:04:40 LOG5 finish_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-13 20:04:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:04:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-13 20:04:40 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-13 20:04:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-13 20:04:40 LOG5 finish_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-13 20:04:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:04:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-13 20:04:40 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-13 20:04:40 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:05:33.7 LST = 09:06:51.9 diff = -78.2 secs 2009-Apr-13 20:04:40 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Apr-13 20:04:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 20:04:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 20:04:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 20:04:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 20:04:41 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090413.a2010.0018.fits' is empty! 2009-Apr-13 20:04:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-13 20:04:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-13 20:04:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-13 20:04:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-13 20:04:41 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:04:41 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-13 20:04:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-13 20:04:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:04:41 INFO2 take_data: Starting WAPP 600-second scan: 910300285 2009-Apr-13 20:04:41 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:04:41 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-13 20:04:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 20:04:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:04:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-13 20:04:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 282.00 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-13 20:04:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-13 20:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-13 20:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-13 20:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-13 20:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-13 20:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-13 20:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 20:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-13 20:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-13 20:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-13 20:05:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:05:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.067 1.011 1.031 2009-Apr-13 20:05:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.912 1.031 1.078 2009-Apr-13 20:05:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.110 0.991 0.976 2009-Apr-13 20:05:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.102 0.951 0.126 2009-Apr-13 20:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-13 20:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 20:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 20:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 20:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-13 20:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-13 20:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2009-Apr-13 20:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-13 20:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-13 20:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2009-Apr-13 20:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:06:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:06:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.072 1.114 1.134 2009-Apr-13 20:06:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.944 1.029 1.079 2009-Apr-13 20:06:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.113 0.999 0.980 2009-Apr-13 20:06:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.103 0.953 0.126 2009-Apr-13 20:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-13 20:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-13 20:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.135 (still bad) 2009-Apr-13 20:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-13 20:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2009-Apr-13 20:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-13 20:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Apr-13 20:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-13 20:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-13 20:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-13 20:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-13 20:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-13 20:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.135 (still bad) 2009-Apr-13 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-13 20:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:07:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:07:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.067 1.011 1.030 2009-Apr-13 20:07:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.911 1.031 1.086 2009-Apr-13 20:07:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.112 0.993 0.983 2009-Apr-13 20:07:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.102 0.951 0.126 2009-Apr-13 20:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-13 20:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-13 20:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-13 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-13 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:08:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:08:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.066 1.011 1.028 2009-Apr-13 20:08:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.911 1.023 1.081 2009-Apr-13 20:08:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.108 0.993 0.983 2009-Apr-13 20:08:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.102 0.949 0.126 2009-Apr-13 20:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-13 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-13 20:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:09:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:09:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.067 1.013 1.032 2009-Apr-13 20:09:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.912 1.025 1.086 2009-Apr-13 20:09:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.113 0.994 0.979 2009-Apr-13 20:09:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.102 0.950 0.126 2009-Apr-13 20:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:10:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:10:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.067 1.010 1.031 2009-Apr-13 20:10:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.911 1.027 1.087 2009-Apr-13 20:10:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.115 0.992 0.979 2009-Apr-13 20:10:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.102 0.948 0.126 2009-Apr-13 20:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:11:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:11:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.066 1.011 1.033 2009-Apr-13 20:11:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.908 1.027 1.083 2009-Apr-13 20:11:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.111 0.996 0.979 2009-Apr-13 20:11:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.102 0.949 0.126 2009-Apr-13 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:12:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:12:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.068 1.011 1.033 2009-Apr-13 20:12:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.911 1.026 1.087 2009-Apr-13 20:12:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.112 0.995 0.979 2009-Apr-13 20:12:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.102 0.949 0.126 2009-Apr-13 20:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:13:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:13:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.071 1.017 1.035 2009-Apr-13 20:13:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.912 1.027 1.091 2009-Apr-13 20:13:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.115 0.997 0.981 2009-Apr-13 20:13:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.102 0.961 0.126 2009-Apr-13 20:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:14:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:14:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.072 1.016 1.038 2009-Apr-13 20:14:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.912 1.031 1.091 2009-Apr-13 20:14:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.119 1.001 0.984 2009-Apr-13 20:14:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.102 0.955 0.126 2009-Apr-13 20:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-13 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:14:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:14:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:14:42 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-13 20:14:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:14:42 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-13 20:14:42 LOG1 fixed_driftmap: New position: year = 2009.2843081222907 RA = 09:16:22.8 RA/Dec = 09:16:56.3 +22:57:21.0 2009-Apr-13 20:14:42 NOTE fixed_driftmap: Correcting ZA to 4:36:07.3 ... 2009-Apr-13 20:14:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.6020151447 -CF 2009-Apr-13 20:14:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-13 20:14:42 START begin_task: Starting task 'WAPP calibration' 2009-Apr-13 20:14:42 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-13 20:14:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-13 20:14:42 START begin_task: Starting task 'selecting calibration type' 2009-Apr-13 20:14:42 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-13 20:14:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-13 20:14:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-13 20:14:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:14:42 START begin_task: Starting task 'waiting on setcal' 2009-Apr-13 20:14:42 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-13 20:14:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.6020151447 -CF 2009-Apr-13 20:14:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:14:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-13 20:14:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:14:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:14:42 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:14:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-13 20:14:42 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-13 20:14:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-13 20:14:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:14:42 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-13 20:14:42 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:14:42 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-13 20:14:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:14:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:14:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:14:44 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:14:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-13 20:14:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:14:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:14:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:14:44 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:14:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:14:44 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:14:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:14:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-13 20:14:44 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-13 20:14:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-13 20:14:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-13 20:14:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:14:44 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:14:44 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:14:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-13 20:14:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:14:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:14:44 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-13 20:14:44 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:14:44 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-13 20:14:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:14:44 INFO2 take_data: Starting WAPP 1-second scan: 910300286 2009-Apr-13 20:14:44 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:14:44 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-13 20:14:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:14:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-13 20:14:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 885.00 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:14:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:14:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:14:46 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-13 20:14:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:14:46 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-13 20:14:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-13 20:14:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 20:14:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 20:14:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:14:46 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-13 20:14:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:14:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:14:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:14:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:14:46 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-13 20:14:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-13 20:14:46 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-13 20:14:46 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-13 20:14:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-13 20:14:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:14:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-13 20:14:46 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-13 20:14:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-13 20:14:47 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-13 20:14:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 20:14:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 20:14:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 20:14:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 20:14:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-13 20:14:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-13 20:14:47 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:14:47 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-13 20:14:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-13 20:14:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:14:47 INFO2 take_data: Starting WAPP 600-second scan: 910300287 2009-Apr-13 20:14:47 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:14:47 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-13 20:14:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 20:14:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.566 (still bad) 2009-Apr-13 20:14:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-13 20:14:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 888.00 2009-Apr-13 20:14:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20090413.a2010.0019.fits 2009-Apr-13 20:14:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090413.a2010.0019.fits} 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.566 (still bad) 2009-Apr-13 20:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:15:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:15:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.075 1.019 1.039 2009-Apr-13 20:15:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.911 1.040 1.102 2009-Apr-13 20:15:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.126 1.006 0.988 2009-Apr-13 20:15:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.103 0.957 0.126 2009-Apr-13 20:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2009-Apr-13 20:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.136 (still bad) 2009-Apr-13 20:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-13 20:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2009-Apr-13 20:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2009-Apr-13 20:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-13 20:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2009-Apr-13 20:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.162 (still bad) 2009-Apr-13 20:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.158 (still bad) 2009-Apr-13 20:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-13 20:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-13 20:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2009-Apr-13 20:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-13 20:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.153 (still bad) 2009-Apr-13 20:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.165 (still bad) 2009-Apr-13 20:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.187 (still bad) 2009-Apr-13 20:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.211 (still bad) 2009-Apr-13 20:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.217 (still bad) 2009-Apr-13 20:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.217 (still bad) 2009-Apr-13 20:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.213 (still bad) 2009-Apr-13 20:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.194 (still bad) 2009-Apr-13 20:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.173 (still bad) 2009-Apr-13 20:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.158 (still bad) 2009-Apr-13 20:16:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:16:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.075 1.022 1.042 2009-Apr-13 20:16:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.909 1.028 1.089 2009-Apr-13 20:16:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.135 1.001 0.984 2009-Apr-13 20:16:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.102 0.953 0.126 2009-Apr-13 20:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-13 20:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-13 20:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:17:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:17:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.073 1.015 1.034 2009-Apr-13 20:17:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.909 1.033 1.094 2009-Apr-13 20:17:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.115 1.003 0.986 2009-Apr-13 20:17:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.102 0.953 0.126 2009-Apr-13 20:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:18:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:18:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.076 1.015 1.035 2009-Apr-13 20:18:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.910 1.026 1.094 2009-Apr-13 20:18:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.115 1.001 0.981 2009-Apr-13 20:18:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.102 0.951 0.126 2009-Apr-13 20:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:19:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.074 1.017 1.037 2009-Apr-13 20:19:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.913 1.028 1.096 2009-Apr-13 20:19:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.117 1.000 0.984 2009-Apr-13 20:19:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.102 0.956 0.126 2009-Apr-13 20:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:20:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:20:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 1.076 1.016 1.034 2009-Apr-13 20:20:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.914 1.028 1.096 2009-Apr-13 20:20:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.120 1.004 0.985 2009-Apr-13 20:20:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.102 0.956 0.126 2009-Apr-13 20:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:21:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:21:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.075 1.015 1.037 2009-Apr-13 20:21:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.912 1.027 1.096 2009-Apr-13 20:21:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.121 0.999 0.987 2009-Apr-13 20:21:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.102 0.957 0.127 2009-Apr-13 20:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-13 20:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-13 20:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-13 20:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-13 20:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:22:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.076 1.015 1.036 2009-Apr-13 20:22:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.915 1.026 1.090 2009-Apr-13 20:22:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.119 0.999 0.985 2009-Apr-13 20:22:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.102 0.956 0.126 2009-Apr-13 20:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-13 20:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-13 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-13 20:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:23:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:23:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.076 1.015 1.037 2009-Apr-13 20:23:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.914 1.038 1.102 2009-Apr-13 20:23:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.124 1.000 0.984 2009-Apr-13 20:23:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.102 0.957 0.126 2009-Apr-13 20:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-13 20:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.135 (still bad) 2009-Apr-13 20:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-13 20:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-13 20:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-13 20:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-13 20:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-13 20:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-13 20:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2009-Apr-13 20:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-13 20:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-13 20:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.135 (still bad) 2009-Apr-13 20:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-13 20:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-13 20:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-13 20:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-13 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-13 20:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-13 20:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.131 (still bad) 2009-Apr-13 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:24:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:24:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.077 1.017 1.039 2009-Apr-13 20:24:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.917 1.028 1.085 2009-Apr-13 20:24:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.125 1.003 0.986 2009-Apr-13 20:24:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.102 0.969 0.126 2009-Apr-13 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:24:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:24:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:24:48 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-13 20:24:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:24:48 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-13 20:24:48 LOG1 fixed_driftmap: New position: year = 2009.284327325272 RA = 09:26:30.6 RA/Dec = 09:27:04.0 +22:57:15.2 2009-Apr-13 20:24:48 NOTE fixed_driftmap: Correcting ZA to 4:36:01.5 ... 2009-Apr-13 20:24:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.6004280696 -CF 2009-Apr-13 20:24:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-13 20:24:48 START begin_task: Starting task 'WAPP calibration' 2009-Apr-13 20:24:48 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-13 20:24:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-13 20:24:48 START begin_task: Starting task 'selecting calibration type' 2009-Apr-13 20:24:48 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-13 20:24:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-13 20:24:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-13 20:24:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:24:48 START begin_task: Starting task 'waiting on setcal' 2009-Apr-13 20:24:48 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-13 20:24:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.6004280696 -CF 2009-Apr-13 20:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:24:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-13 20:24:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:24:48 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:24:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-13 20:24:48 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-13 20:24:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:24:49 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-13 20:24:49 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:24:49 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:24:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:24:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:24:49 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:24:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-13 20:24:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:24:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:24:49 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:24:49 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:24:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:24:49 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:24:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:24:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-13 20:24:49 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-13 20:24:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-13 20:24:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-13 20:24:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:24:49 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:24:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-13 20:24:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:24:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:24:49 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-13 20:24:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:24:49 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-13 20:24:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:24:49 INFO2 take_data: Starting WAPP 1-second scan: 910300288 2009-Apr-13 20:24:49 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:24:49 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-13 20:24:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:24:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-13 20:24:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1490.00 2009-Apr-13 20:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:24:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:24:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:24:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:24:51 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-13 20:24:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:24:51 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-13 20:24:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-13 20:24:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 20:24:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 20:24:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:24:51 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-13 20:24:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:24:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:24:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:24:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:24:51 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-13 20:24:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-13 20:24:51 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-13 20:24:51 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-13 20:24:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-13 20:24:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:24:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-13 20:24:51 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-13 20:24:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-13 20:24:51 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-13 20:24:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 20:24:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 20:24:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 20:24:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 20:24:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-13 20:24:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-13 20:24:52 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:24:52 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-13 20:24:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-13 20:24:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:24:52 INFO2 take_data: Starting WAPP 600-second scan: 910300289 2009-Apr-13 20:24:52 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:24:52 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-13 20:24:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 20:24:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:24:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-13 20:24:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1493.00 2009-Apr-13 20:24:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20090413.a2010.0020.fits 2009-Apr-13 20:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.576 (still bad) 2009-Apr-13 20:24:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090413.a2010.0020.fits} 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:24:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-13 20:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-13 20:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:25:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:25:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 1.081 1.018 1.040 2009-Apr-13 20:25:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.920 1.030 1.088 2009-Apr-13 20:25:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.124 1.004 0.986 2009-Apr-13 20:25:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.102 0.959 0.126 2009-Apr-13 20:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-13 20:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:26:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:26:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.081 1.019 1.038 2009-Apr-13 20:26:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.917 1.029 1.089 2009-Apr-13 20:26:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.125 1.021 1.006 2009-Apr-13 20:26:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.102 0.960 0.126 2009-Apr-13 20:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-13 20:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-13 20:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-13 20:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-13 20:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-13 20:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-13 20:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:27:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-13 20:27:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.078 1.017 1.036 2009-Apr-13 20:27:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.919 1.030 1.089 2009-Apr-13 20:27:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.126 1.003 0.990 2009-Apr-13 20:27:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.102 0.960 0.126 2009-Apr-13 20:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-13 20:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-13 20:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-13 20:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-13 20:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2009-Apr-13 20:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-13 20:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-13 20:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-13 20:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-13 20:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:28:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:28:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 1.098 1.018 1.039 2009-Apr-13 20:28:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.922 1.029 1.094 2009-Apr-13 20:28:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.036 1.131 1.003 0.992 2009-Apr-13 20:28:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.103 0.958 0.127 2009-Apr-13 20:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:29:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:29:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.075 1.018 1.038 2009-Apr-13 20:29:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.920 1.030 1.101 2009-Apr-13 20:29:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.133 1.002 0.994 2009-Apr-13 20:29:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.103 0.960 0.127 2009-Apr-13 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-13 20:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:30:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:30:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 1.079 1.022 1.039 2009-Apr-13 20:30:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.925 1.031 1.105 2009-Apr-13 20:30:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.136 1.003 0.999 2009-Apr-13 20:30:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.103 0.960 0.127 2009-Apr-13 20:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:31:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:31:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.077 1.021 1.038 2009-Apr-13 20:31:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.923 1.030 1.100 2009-Apr-13 20:31:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.137 1.004 0.990 2009-Apr-13 20:31:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.103 0.962 0.127 2009-Apr-13 20:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-13 20:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:32:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:32:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.079 1.019 1.038 2009-Apr-13 20:32:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 0.924 1.032 1.104 2009-Apr-13 20:32:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.045 1.132 1.001 0.996 2009-Apr-13 20:32:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.103 0.960 0.127 2009-Apr-13 20:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-13 20:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-13 20:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:33:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:33:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.080 1.020 1.039 2009-Apr-13 20:33:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 0.927 1.032 1.106 2009-Apr-13 20:33:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.136 1.009 1.001 2009-Apr-13 20:33:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.103 0.959 0.127 2009-Apr-13 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-13 20:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:34:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:34:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.976 1.083 1.024 1.042 2009-Apr-13 20:34:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.926 1.034 1.108 2009-Apr-13 20:34:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 1.136 1.010 1.003 2009-Apr-13 20:34:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.103 0.961 0.128 2009-Apr-13 20:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:34:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:34:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:34:53 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-13 20:34:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:34:53 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-13 20:34:53 LOG1 fixed_driftmap: New position: year = 2009.2843464965651 RA = 09:36:37.3 RA/Dec = 09:37:10.6 +22:57:09.8 2009-Apr-13 20:34:53 NOTE fixed_driftmap: Correcting ZA to 4:35:56.1 ... 2009-Apr-13 20:34:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.5989193361 -CF 2009-Apr-13 20:34:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-13 20:34:53 START begin_task: Starting task 'WAPP calibration' 2009-Apr-13 20:34:53 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-13 20:34:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-13 20:34:53 START begin_task: Starting task 'selecting calibration type' 2009-Apr-13 20:34:53 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-13 20:34:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-13 20:34:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-13 20:34:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:34:53 START begin_task: Starting task 'waiting on setcal' 2009-Apr-13 20:34:53 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-13 20:34:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.5989193361 -CF 2009-Apr-13 20:34:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:34:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-13 20:34:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:34:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:34:53 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:34:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-13 20:34:53 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-13 20:34:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-13 20:34:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:34:53 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-13 20:34:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:34:53 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-13 20:34:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:34:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:34:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:34:54 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:34:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-13 20:34:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:34:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:34:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:34:54 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:34:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:34:54 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:34:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:34:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-13 20:34:54 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-13 20:34:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-13 20:34:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-13 20:34:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:34:54 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:34:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-13 20:34:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:34:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:34:54 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-13 20:34:54 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:34:54 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-13 20:34:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:34:54 INFO2 take_data: Starting WAPP 1-second scan: 910300290 2009-Apr-13 20:34:54 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:34:54 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-13 20:34:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:34:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-13 20:34:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2095.00 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:34:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:34:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:34:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:34:56 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-13 20:34:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:34:56 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-13 20:34:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-13 20:34:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 20:34:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 20:34:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:34:56 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-13 20:34:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:34:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:34:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:34:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:34:56 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-13 20:34:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-13 20:34:56 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-13 20:34:56 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-13 20:34:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-13 20:34:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:34:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-13 20:34:56 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-13 20:34:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-13 20:34:56 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-13 20:34:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 20:34:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 20:34:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 20:34:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 20:34:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-13 20:34:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-13 20:34:57 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:34:57 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-13 20:34:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-13 20:34:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:34:57 INFO2 take_data: Starting WAPP 600-second scan: 910300291 2009-Apr-13 20:34:57 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:34:57 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-13 20:34:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 20:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.601 (still bad) 2009-Apr-13 20:34:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:34:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-13 20:34:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20090413.a2010.0021.fits 2009-Apr-13 20:34:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2098.00 2009-Apr-13 20:34:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090413.a2010.0021.fits} 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.601 (still bad) 2009-Apr-13 20:34:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:35:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:35:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 1.107 1.031 1.047 2009-Apr-13 20:35:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.924 1.035 1.111 2009-Apr-13 20:35:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 1.137 1.019 1.015 2009-Apr-13 20:35:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.104 0.963 0.128 2009-Apr-13 20:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-13 20:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:36:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:36:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.083 1.021 1.041 2009-Apr-13 20:36:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 0.925 1.036 1.111 2009-Apr-13 20:36:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 1.138 1.008 0.998 2009-Apr-13 20:36:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.103 0.961 0.127 2009-Apr-13 20:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:37:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:37:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.081 1.022 1.039 2009-Apr-13 20:37:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.921 1.033 1.108 2009-Apr-13 20:37:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.132 1.015 1.007 2009-Apr-13 20:37:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.104 0.960 0.127 2009-Apr-13 20:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-13 20:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-13 20:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:38:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:38:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.082 1.023 1.040 2009-Apr-13 20:38:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.922 1.033 1.107 2009-Apr-13 20:38:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.130 1.008 0.997 2009-Apr-13 20:38:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.103 0.962 0.127 2009-Apr-13 20:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-13 20:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.128 (still bad) 2009-Apr-13 20:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-13 20:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.128 (still bad) 2009-Apr-13 20:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-13 20:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.128 (still bad) 2009-Apr-13 20:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-13 20:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:39:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:39:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.082 1.022 1.041 2009-Apr-13 20:39:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.924 1.035 1.110 2009-Apr-13 20:39:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.129 1.010 1.002 2009-Apr-13 20:39:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.103 0.961 0.128 2009-Apr-13 20:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-13 20:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-13 20:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-13 20:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-13 20:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:40:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:40:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 1.080 1.023 1.042 2009-Apr-13 20:40:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.921 1.033 1.109 2009-Apr-13 20:40:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.132 1.008 1.000 2009-Apr-13 20:40:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.104 0.961 0.128 2009-Apr-13 20:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.131 (still bad) 2009-Apr-13 20:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-13 20:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-13 20:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-13 20:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:42:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:42:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.095 1.023 1.041 2009-Apr-13 20:42:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 0.923 1.036 1.113 2009-Apr-13 20:42:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.133 1.008 1.003 2009-Apr-13 20:42:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.104 0.962 0.128 2009-Apr-13 20:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-13 20:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-13 20:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.132 (still bad) 2009-Apr-13 20:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-13 20:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:43:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:43:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.087 1.023 1.044 2009-Apr-13 20:43:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 0.924 1.038 1.116 2009-Apr-13 20:43:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 1.135 1.010 0.999 2009-Apr-13 20:43:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.104 0.965 0.128 2009-Apr-13 20:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-13 20:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-13 20:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.134 (still bad) 2009-Apr-13 20:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:44:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:44:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.088 1.025 1.043 2009-Apr-13 20:44:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 0.925 1.036 1.115 2009-Apr-13 20:44:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 1.137 1.010 0.997 2009-Apr-13 20:44:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.103 0.965 0.128 2009-Apr-13 20:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-13 20:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-13 20:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-13 20:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-13 20:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-13 20:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:44:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:44:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:44:58 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-13 20:44:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:44:58 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-13 20:44:58 LOG1 fixed_driftmap: New position: year = 2009.2843656678581 RA = 09:46:44.1 RA/Dec = 09:47:17.3 +22:57:04.7 2009-Apr-13 20:44:58 NOTE fixed_driftmap: Correcting ZA to 4:35:51.0 ... 2009-Apr-13 20:44:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.5974891902 -CF 2009-Apr-13 20:44:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-13 20:44:58 START begin_task: Starting task 'WAPP calibration' 2009-Apr-13 20:44:58 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-13 20:44:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-13 20:44:58 START begin_task: Starting task 'selecting calibration type' 2009-Apr-13 20:44:58 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-13 20:44:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-13 20:44:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-13 20:44:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:44:58 START begin_task: Starting task 'waiting on setcal' 2009-Apr-13 20:44:58 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-13 20:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:44:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.5974891902 -CF 2009-Apr-13 20:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:44:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-13 20:44:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-13 20:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:44:58 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-13 20:44:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-13 20:44:58 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-13 20:44:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-13 20:44:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:44:58 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-13 20:44:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:44:58 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-13 20:44:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:44:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:44:59 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:44:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-13 20:44:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-13 20:44:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:44:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-13 20:44:59 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-13 20:44:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-13 20:44:59 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-13 20:44:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-13 20:44:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-13 20:44:59 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-13 20:44:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-13 20:44:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-13 20:44:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:44:59 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:44:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-13 20:44:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:44:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:44:59 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-13 20:44:59 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:44:59 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-13 20:44:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:44:59 INFO2 take_data: Starting WAPP 1-second scan: 910300292 2009-Apr-13 20:44:59 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:44:59 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-13 20:44:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:44:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-13 20:44:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2700.00 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:45:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-13 20:45:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-13 20:45:01 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-13 20:45:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-13 20:45:01 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-13 20:45:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-13 20:45:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-13 20:45:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-13 20:45:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-13 20:45:01 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-13 20:45:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-13 20:45:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-13 20:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.600 (still bad) 2009-Apr-13 20:45:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-13 20:45:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-13 20:45:01 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-13 20:45:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-13 20:45:01 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-13 20:45:01 LOG5 finish_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-13 20:45:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-13 20:45:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-13 20:45:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-13 20:45:01 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-13 20:45:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Apr-13 20:45:01 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Apr-13 20:45:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Apr-13 20:45:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Apr-13 20:45:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Apr-13 20:45:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Apr-13 20:45:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-13 20:45:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-13 20:45:02 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-13 20:45:02 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-13 20:45:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-13 20:45:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-13 20:45:02 INFO2 take_data: Starting WAPP 600-second scan: 910300293 2009-Apr-13 20:45:02 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-13 20:45:02 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-13 20:45:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Apr-13 20:45:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-13 20:45:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-13 20:45:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2703.00 2009-Apr-13 20:45:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20090413.a2010.0022.fits 2009-Apr-13 20:45:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090413.a2010.0022.fits} 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2009-Apr-13 20:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1950.000000 MHz 2009-Apr-13 20:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:45:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:45:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.091 1.025 1.044 2009-Apr-13 20:45:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.926 1.037 1.115 2009-Apr-13 20:45:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.045 1.138 1.013 0.996 2009-Apr-13 20:45:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.103 0.963 0.127 2009-Apr-13 20:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-13 20:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-13 20:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-13 20:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-13 20:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-13 20:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-13 20:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.149 (still bad) 2009-Apr-13 20:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:46:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:46:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.088 1.025 1.044 2009-Apr-13 20:46:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 0.927 1.036 1.115 2009-Apr-13 20:46:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.052 1.141 1.012 0.999 2009-Apr-13 20:46:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 0.104 0.967 0.128 2009-Apr-13 20:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-13 20:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-13 20:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-13 20:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-13 20:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-13 20:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-13 20:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-13 20:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-13 20:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-13 20:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-13 20:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-13 20:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:47:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-13 20:47:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.087 1.032 1.048 2009-Apr-13 20:47:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 0.929 1.041 1.118 2009-Apr-13 20:47:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.053 1.143 1.016 1.004 2009-Apr-13 20:47:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.103 0.967 0.127 2009-Apr-13 20:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-13 20:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-13 20:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-13 20:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-13 20:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.144 (still bad) 2009-Apr-13 20:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-13 20:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-13 20:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-13 20:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.150 (still bad) 2009-Apr-13 20:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-13 20:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.144 (still bad) 2009-Apr-13 20:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-13 20:48:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:48:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 1.093 1.027 1.044 2009-Apr-13 20:48:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 0.935 1.036 1.117 2009-Apr-13 20:48:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.050 1.141 1.012 0.996 2009-Apr-13 20:48:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.104 0.969 0.128 2009-Apr-13 20:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-13 20:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-13 20:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.144 (still bad) 2009-Apr-13 20:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.149 (still bad) 2009-Apr-13 20:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-13 20:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-13 20:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.144 (still bad) 2009-Apr-13 20:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-13 20:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-13 20:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-13 20:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-13 20:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-13 20:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.149 (still bad) 2009-Apr-13 20:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.153 (still bad) 2009-Apr-13 20:49:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-13 20:49:11 LOG4 check_wapp_levels: WAPP-1 power