2009-Apr-10 20:07:11 BEGIN executive: CIMA executive starting ... 2009-Apr-10 20:07:11 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-10 20:07:11 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-10 20:07:11 INFO4 executive: This is an ON-LINE session 2009-Apr-10 20:07:11 INFO4 executive: This is a REMOTE session 2009-Apr-10 20:07:11 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-10 20:07:11 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Shan' 2009-Apr-10 20:07:11 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090410' 2009-Apr-10 20:07:12 LOG2 log_preferences: Currently applied preferences: 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-10 20:07:12 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-10 20:07:12 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-10 20:07:12 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-10 20:07:12 ALERT executive: CIMA executive ready 2009-Apr-10 20:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:07:15 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-10 20:07:16 NOTE frontend: CIMA frontend ready 2009-Apr-10 20:07:21 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-10 20:07:21 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-10 20:07:21 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-10 20:07:21 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-10 20:07:21 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-10 20:07:21 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-10 20:07:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-10 20:07:21 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-10 20:07:21 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-10 20:07:21 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-10 20:07:21 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-10 20:07:21 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-10 20:07:21 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-10 20:07:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:07:21 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-10 20:07:21 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-10 20:07:21 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-10 20:07:21 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:07:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-10 20:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:07:35 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-10 20:07:35 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-10 20:07:35 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-10 20:07:35 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-10 20:07:35 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-10 20:07:35 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-10 20:07:35 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-10 20:07:35 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-10 20:07:35 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-10 20:07:35 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-10 20:07:38 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-10 20:07:38 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-10 20:07:38 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-10 20:07:38 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-10 20:08:40 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-10 20:08:46 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-10 20:08:46 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-10 20:08:46 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-10 20:08:46 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-10 20:08:46 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-10 20:08:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-10 20:08:46 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-10 20:08:46 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-10 20:08:46 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-10 20:08:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-10 20:08:46 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-10 20:08:46 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-10 20:08:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-10 20:08:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-10 20:08:48 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-10 20:08:48 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-10 20:08:48 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-10 20:08:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-10 20:08:48 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-10 20:08:48 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-10 20:08:49 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-10 20:08:49 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-10 20:08:49 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-10 20:08:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-10 20:08:49 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-10 20:08:49 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-10 20:08:49 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-10 20:08:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:08:49 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-10 20:08:49 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-10 20:08:49 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-10 20:08:49 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-10 20:08:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-10 20:08:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:08:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:08:49 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:08:49 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:08:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:08:49 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:08:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-10 20:08:49 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-10 20:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-10 20:08:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-10 20:08:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:08:49 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-10 20:08:49 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-10 20:08:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:08:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:08:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:08:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:08:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:08:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:08:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:05 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:09:05 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-10 20:09:05 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-10 20:09:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-10 20:09:05 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-10 20:09:05 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-10 20:09:05 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-10 20:09:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:09:05 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-10 20:09:05 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-10 20:09:05 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-10 20:09:05 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-10 20:09:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-10 20:09:05 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-10 20:09:05 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-10 20:09:05 START begin_task: Starting task 'selecting calibration port' 2009-Apr-10 20:09:05 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-10 20:09:05 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-10 20:09:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-10 20:09:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:09:05 START begin_task: Starting task 'waiting on calport' 2009-Apr-10 20:09:05 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-10 20:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:06 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-10 20:09:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:06 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:09:06 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-10 20:09:06 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-10 20:09:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-10 20:09:06 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-10 20:09:06 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-10 20:09:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:09:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:09:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:09:06 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-10 20:09:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:09:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:09:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:09:06 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:09:06 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-10 20:09:06 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-10 20:09:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:09:06 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-10 20:09:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:09:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:09:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:09:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:09:06 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:09:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:09:07 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-10 20:09:07 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-10 20:09:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:09:07 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-10 20:09:07 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-10 20:09:07 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-10 20:09:07 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-10 20:09:07 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-10 20:09:07 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-10 20:09:07 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-10 20:09:07 LOG3 track_source: Calling 'track_source galfasrc 085900.0 +234330 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-10 20:09:07 START begin_task: Starting task 'sending tracking commands' 2009-Apr-10 20:09:07 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-10 20:09:07 INFO1 track_source: Starting to track galfasrc 2009-Apr-10 20:09:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-10 20:09:07 LOG3 vw_send: To DATATAKING: set ra 085900.0 2009-Apr-10 20:09:07 LOG3 vw_send: To DATATAKING: set dec +234330 2009-Apr-10 20:09:07 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-10 20:09:07 LOG3 vw_send: To DATATAKING: pnt tr 085900.0 +234330 -CJ 2009-Apr-10 20:09:07 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-10 20:09:07 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-10 20:09:07 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-10 20:09:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:09:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-10 20:09:07 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-10 20:09:07 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-10 20:09:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:09:07 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-10 20:09:07 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-10 20:09:07 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-10 20:09:07 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-10 20:09:07 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-10 20:09:07 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-10 20:09:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-10 20:09:07 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-10 20:09:07 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-10 20:09:07 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-10 20:09:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:09:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20090410.a2010.0017.fits 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-10 20:09:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-10 20:09:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-10 20:09:08 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090410.a2010.0017.fits} 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: set ra 085900.0 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: set dec +234330 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: vw% 085900.0 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: vw% +234330 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: pnt tr 085900.0 +234330 -CJ 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-10 20:09:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:09:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-10 20:09:39 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-10 20:09:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-10 20:09:39 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-10 20:09:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-10 20:09:39 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-10 20:09:39 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-10 20:09:39 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-10 20:09:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:09:39 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-10 20:09:39 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-10 20:09:39 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-10 20:09:39 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-10 20:09:39 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-10 20:09:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-10 20:09:39 LOG3 waittrk: Start waittrk 5 2009-Apr-10 20:09:39 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-10 20:09:39 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-10 20:09:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-10 20:09:44 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-10 20:09:45 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-10 20:09:45 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-10 20:09:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-10 20:09:45 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-10 20:09:45 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-10 20:09:45 INFO2 waittrk: Now tracking galfasrc 2009-Apr-10 20:09:45 LOG4 waittrk: Current telescope position: Az = 178.35 ZA = 5.36 2009-Apr-10 20:09:45 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-10 20:09:45 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-10 20:09:45 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-10 20:09:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:09:45 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-10 20:09:45 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-10 20:09:45 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-10 20:09:45 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-10 20:09:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-10 20:09:45 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-10 20:09:45 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-10 20:09:45 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-10 20:09:45 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-10 20:09:46 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-10 20:09:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-10 20:09:46 START begin_task: Starting task 'selecting calibration type' 2009-Apr-10 20:09:46 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-10 20:09:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-10 20:09:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-10 20:09:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:09:46 START begin_task: Starting task 'waiting on setcal' 2009-Apr-10 20:09:46 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-10 20:09:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-10 20:09:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:09:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:46 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:09:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-10 20:09:46 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-10 20:09:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-10 20:09:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:09:46 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-10 20:09:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:09:46 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-10 20:09:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:09:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:09:47 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:09:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-10 20:09:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:09:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:09:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:09:47 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:09:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:09:47 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:09:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:09:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-10 20:09:47 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:09:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:09:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:09:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:09:47 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090410.a2010.0017.fits' is empty! 2009-Apr-10 20:09:47 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-10 20:09:47 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-10 20:09:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-10 20:09:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:09:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:09:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:09:47 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:09:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:09:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:09:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:09:47 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-10 20:09:47 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-10 20:09:47 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-10 20:09:47 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-10 20:09:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-10 20:09:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-10 20:09:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:09:47 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-10 20:09:47 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-10 20:09:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-10 20:09:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:09:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:09:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:09:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-10 20:09:50 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-10 20:09:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-10 20:09:50 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-10 20:09:50 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-10 20:09:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-10 20:09:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:09:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:09:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:09:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:09:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-10 20:09:50 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-10 20:09:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-10 20:09:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-10 20:09:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-10 20:09:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-10 20:09:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-10 20:09:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-10 20:09:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-10 20:09:51 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-10 20:09:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.968 1.057 ALFA beam 1: 1.009 1.021 2009-Apr-10 20:09:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.960 0.922 ALFA beam 3: 1.004 1.036 2009-Apr-10 20:09:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.012 1.073 ALFA beam 5: 0.983 1.098 2009-Apr-10 20:09:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.049 0.098 ALFA beam 7: 0.943 0.121 2009-Apr-10 20:09:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-10 20:09:51 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-10 20:09:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-10 20:09:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:09:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-10 20:09:51 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-10 20:09:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-10 20:09:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-10 20:09:51 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-10 20:09:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-10 20:09:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:09:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-10 20:09:51 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-10 20:09:51 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-10 20:09:51 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-10 20:09:51 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-10 20:09:51 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:09:51 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:09:51 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:09:51 LOG2 antvel: Parameters to Doppler: Topocentric 86990 2009 100 0.0 2009-Apr-10 20:09:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:09:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-10 20:09:51 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-10 20:09:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:09:51 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:09:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:09:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:09:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-10 20:09:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:09:51 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-10 20:09:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-10 20:09:51 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.003626 2009.2760853170075 18.999933 2009-Apr-10 20:09:51 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333468 23.724999999999994 2009-Apr-10 20:09:51 LOG4 log_alfabeam: ALFABEAM 1 8.984812280782203 23.620840232636443 2009-Apr-10 20:09:51 LOG4 log_alfabeam: ALFABEAM 2 8.989660901222694 23.692218188663762 2009-Apr-10 20:09:51 LOG4 log_alfabeam: ALFABEAM 3 8.988266345482014 23.796637314890226 2009-Apr-10 20:09:51 LOG4 log_alfabeam: ALFABEAM 4 8.981802442957393 23.829078618363479 2009-Apr-10 20:09:51 LOG4 log_alfabeam: ALFABEAM 5 8.976924150656776 23.756293751733544 2009-Apr-10 20:09:51 LOG4 log_alfabeam: ALFABEAM 6 8.978538986905411 23.652495518644280 2009-Apr-10 20:09:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000144 2009-Apr-10 20:09:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:09:52 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-10 20:09:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:09:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:09:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:09:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-10 20:09:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 593.00 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:09:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-10 20:09:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.057 1.009 1.021 2009-Apr-10 20:09:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.922 1.004 1.036 2009-Apr-10 20:09:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 1.116 1.044 1.155 2009-Apr-10 20:09:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.098 0.943 0.121 2009-Apr-10 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.159 (still bad) 2009-Apr-10 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.163 (still bad) 2009-Apr-10 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.159 (still bad) 2009-Apr-10 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.158 (still bad) 2009-Apr-10 20:10:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:10:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:10:03 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-10 20:10:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:10:03 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-10 20:10:03 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-10 20:10:03 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-10 20:10:03 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-10 20:10:03 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:10:03 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:10:03 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:10:03 LOG2 antvel: Parameters to Doppler: Topocentric 87003 2009 100 0.0 2009-Apr-10 20:10:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:10:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-10 20:10:03 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-10 20:10:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:10:03 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:10:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:10:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-10 20:10:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:10:03 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-10 20:10:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-10 20:10:03 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.007247 2009.2760857289527 18.999933 2009-Apr-10 20:10:03 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333507 23.725000000000001 2009-Apr-10 20:10:03 LOG4 log_alfabeam: ALFABEAM 1 8.984885478586264 23.621041416321809 2009-Apr-10 20:10:03 LOG4 log_alfabeam: ALFABEAM 2 8.989683707757164 23.693059843646346 2009-Apr-10 20:10:03 LOG4 log_alfabeam: ALFABEAM 3 8.988215653390320 23.797288888238093 2009-Apr-10 20:10:03 LOG4 log_alfabeam: ALFABEAM 4 8.981729206518253 23.828870563925655 2009-Apr-10 20:10:03 LOG4 log_alfabeam: ALFABEAM 5 8.976902451402758 23.755441807448157 2009-Apr-10 20:10:03 LOG4 log_alfabeam: ALFABEAM 6 8.978590206236820 23.651862656856565 2009-Apr-10 20:10:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000145 2009-Apr-10 20:10:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:10:04 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-10 20:10:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:10:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:10:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.160 (still bad) 2009-Apr-10 20:10:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-10 20:10:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 605.00 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:10:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:10:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:10:15 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-10 20:10:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:10:15 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-10 20:10:15 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-10 20:10:15 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-10 20:10:15 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-10 20:10:15 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:10:15 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:10:15 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:10:15 LOG2 antvel: Parameters to Doppler: Topocentric 87015 2009 100 0.0 2009-Apr-10 20:10:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:10:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-10 20:10:15 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-10 20:10:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:10:15 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:10:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:10:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-10 20:10:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:10:15 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-10 20:10:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-10 20:10:15 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.010589 2009.2760861092099 18.999933 2009-Apr-10 20:10:15 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333444 23.725000000000001 2009-Apr-10 20:10:15 LOG4 log_alfabeam: ALFABEAM 1 8.984952863313955 23.621235579043567 2009-Apr-10 20:10:15 LOG4 log_alfabeam: ALFABEAM 2 8.989704219678110 23.693838817500964 2009-Apr-10 20:10:15 LOG4 log_alfabeam: ALFABEAM 3 8.988168489004261 23.797883879018393 2009-Apr-10 20:10:15 LOG4 log_alfabeam: ALFABEAM 4 8.981661795017704 23.828670069192079 2009-Apr-10 20:10:15 LOG4 log_alfabeam: ALFABEAM 5 8.976882973714813 23.754653593666866 2009-Apr-10 20:10:15 LOG4 log_alfabeam: ALFABEAM 6 8.978637832923676 23.651285044008077 2009-Apr-10 20:10:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000146 2009-Apr-10 20:10:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:10:16 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-10 20:10:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:10:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:10:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-10 20:10:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 617.00 2009-Apr-10 20:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:10:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:10:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:10:27 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-10 20:10:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:10:27 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-10 20:10:27 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-10 20:10:27 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-10 20:10:27 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-10 20:10:27 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:10:27 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:10:27 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:10:27 LOG2 antvel: Parameters to Doppler: Topocentric 87027 2009 100 0.0 2009-Apr-10 20:10:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:10:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-10 20:10:27 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-10 20:10:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:10:27 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:10:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:10:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-10 20:10:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:10:27 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-10 20:10:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-10 20:10:27 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.013932 2009.2760864894669 18.999933 2009-Apr-10 20:10:27 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333464 23.725000000000012 2009-Apr-10 20:10:27 LOG4 log_alfabeam: ALFABEAM 1 8.985020086344457 23.621437880193579 2009-Apr-10 20:10:27 LOG4 log_alfabeam: ALFABEAM 2 8.989724217879839 23.694619919148430 2009-Apr-10 20:10:27 LOG4 log_alfabeam: ALFABEAM 3 8.988120959292848 23.798472793190324 2009-Apr-10 20:10:27 LOG4 log_alfabeam: ALFABEAM 4 8.981594553733046 23.828461446094444 2009-Apr-10 20:10:27 LOG4 log_alfabeam: ALFABEAM 5 8.976864021320653 23.753863499550317 2009-Apr-10 20:10:27 LOG4 log_alfabeam: ALFABEAM 6 8.978685801557720 23.650713608304255 2009-Apr-10 20:10:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000147 2009-Apr-10 20:10:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:10:28 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-10 20:10:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:10:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:10:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-10 20:10:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 629.00 2009-Apr-10 20:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:10:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:10:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:10:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:10:39 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-10 20:10:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:10:39 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-10 20:10:39 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-10 20:10:39 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-10 20:10:39 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-10 20:10:39 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:10:39 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:10:39 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:10:39 LOG2 antvel: Parameters to Doppler: Topocentric 87039 2009 100 0.0 2009-Apr-10 20:10:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:10:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-10 20:10:39 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-10 20:10:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:10:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:10:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:10:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-10 20:10:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:10:39 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-10 20:10:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-10 20:10:39 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.017274 2009.2760868697239 18.999933 2009-Apr-10 20:10:39 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333386 23.724999999999994 2009-Apr-10 20:10:39 LOG4 log_alfabeam: ALFABEAM 1 8.985087092473735 23.621648131172304 2009-Apr-10 20:10:39 LOG4 log_alfabeam: ALFABEAM 2 8.989743687071098 23.695402497394255 2009-Apr-10 20:10:39 LOG4 log_alfabeam: ALFABEAM 3 8.988073104526922 23.799055157626221 2009-Apr-10 20:10:39 LOG4 log_alfabeam: ALFABEAM 4 8.981527537865087 23.828244889895327 2009-Apr-10 20:10:39 LOG4 log_alfabeam: ALFABEAM 5 8.976845608372821 23.753072185134172 2009-Apr-10 20:10:39 LOG4 log_alfabeam: ALFABEAM 6 8.978734071467837 23.650148804100830 2009-Apr-10 20:10:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000148 2009-Apr-10 20:10:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:10:40 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-10 20:10:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:10:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:10:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-10 20:10:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 641.00 2009-Apr-10 20:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:10:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2009-Apr-10 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-10 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-10 20:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2009-Apr-10 20:10:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:10:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:10:51 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-10 20:10:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:10:51 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-10 20:10:51 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-10 20:10:51 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-10 20:10:51 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-10 20:10:51 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:10:51 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:10:51 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:10:51 LOG2 antvel: Parameters to Doppler: Topocentric 87051 2009 100 0.0 2009-Apr-10 20:10:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:10:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-10 20:10:51 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-10 20:10:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:10:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:10:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:10:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-10 20:10:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:10:51 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-10 20:10:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-10 20:10:51 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.020616 2009.2760872499809 18.999933 2009-Apr-10 20:10:51 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333432 23.725000000000001 2009-Apr-10 20:10:51 LOG4 log_alfabeam: ALFABEAM 1 8.985153887033057 23.621866318507038 2009-Apr-10 20:10:51 LOG4 log_alfabeam: ALFABEAM 2 8.989762630350132 23.696186601139726 2009-Apr-10 20:10:51 LOG4 log_alfabeam: ALFABEAM 3 8.988024922570379 23.799631033339622 2009-Apr-10 20:10:51 LOG4 log_alfabeam: ALFABEAM 4 8.981460742054244 23.828020415029776 2009-Apr-10 20:10:51 LOG4 log_alfabeam: ALFABEAM 5 8.976827731564246 23.752279602003863 2009-Apr-10 20:10:51 LOG4 log_alfabeam: ALFABEAM 6 8.978782644809105 23.649590567238864 2009-Apr-10 20:10:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000149 2009-Apr-10 20:10:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:10:52 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-10 20:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2009-Apr-10 20:10:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:10:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:10:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:10:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:10:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-10 20:10:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 653.00 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:10:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:10:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-10 20:10:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.054 1.000 1.014 2009-Apr-10 20:10:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.917 1.009 1.050 2009-Apr-10 20:10:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.092 0.970 1.110 2009-Apr-10 20:10:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.100 0.946 0.123 2009-Apr-10 20:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-10 20:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-10 20:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-10 20:11:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:11:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:11:03 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-10 20:11:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:11:03 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-10 20:11:03 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-10 20:11:03 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-10 20:11:03 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-10 20:11:03 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:11:03 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:11:03 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:11:03 LOG2 antvel: Parameters to Doppler: Topocentric 87063 2009 100 0.0 2009-Apr-10 20:11:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:11:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-10 20:11:03 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-10 20:11:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:11:03 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:11:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:11:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-10 20:11:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:11:03 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-10 20:11:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-10 20:11:03 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.023959 2009.276087630238 18.999933 2009-Apr-10 20:11:03 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333350 23.725000000000001 2009-Apr-10 20:11:03 LOG4 log_alfabeam: ALFABEAM 1 8.985220475294506 23.622092433102939 2009-Apr-10 20:11:03 LOG4 log_alfabeam: ALFABEAM 2 8.989781050549688 23.696972280691746 2009-Apr-10 20:11:03 LOG4 log_alfabeam: ALFABEAM 3 8.987976411077364 23.800200478369529 2009-Apr-10 20:11:03 LOG4 log_alfabeam: ALFABEAM 4 8.981394161001994 23.827788031546671 2009-Apr-10 20:11:03 LOG4 log_alfabeam: ALFABEAM 5 8.976810387856949 23.751485700396298 2009-Apr-10 20:11:03 LOG4 log_alfabeam: ALFABEAM 6 8.978831523940183 23.649038836593995 2009-Apr-10 20:11:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000150 2009-Apr-10 20:11:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:11:04 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-10 20:11:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:11:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:11:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-10 20:11:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-10 20:11:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 665.00 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-10 20:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2009-Apr-10 20:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2009-Apr-10 20:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-10 20:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-10 20:11:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:11:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:11:15 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-10 20:11:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:11:15 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-10 20:11:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-10 20:11:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-10 20:11:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-10 20:11:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:11:15 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-10 20:11:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:11:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-10 20:11:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:11:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:11:15 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-10 20:11:15 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-10 20:11:15 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-10 20:11:15 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-10 20:11:15 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:11:15 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:11:15 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:11:15 LOG2 antvel: Parameters to Doppler: Topocentric 87075 2009 100 0.0 2009-Apr-10 20:11:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:11:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-10 20:11:15 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-10 20:11:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:11:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:11:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:11:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-10 20:11:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:11:15 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-10 20:11:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-10 20:11:15 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.027301 2009.2760880104952 18.999933 2009-Apr-10 20:11:15 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333436 23.725000000000001 2009-Apr-10 20:11:15 LOG4 log_alfabeam: ALFABEAM 1 8.985286803015088 23.622326256763156 2009-Apr-10 20:11:15 LOG4 log_alfabeam: ALFABEAM 2 8.989798934418795 23.697758880856359 2009-Apr-10 20:11:15 LOG4 log_alfabeam: ALFABEAM 3 8.987927611453205 23.800763045598231 2009-Apr-10 20:11:15 LOG4 log_alfabeam: ALFABEAM 4 8.981327848910349 23.827547964186760 2009-Apr-10 20:11:15 LOG4 log_alfabeam: ALFABEAM 5 8.976793589325110 23.750691143136525 2009-Apr-10 20:11:15 LOG4 log_alfabeam: ALFABEAM 6 8.978880667165560 23.648494040269167 2009-Apr-10 20:11:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000151 2009-Apr-10 20:11:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:11:16 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-10 20:11:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:11:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:11:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-10 20:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-10 20:11:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 677.00 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:11:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.105 (still bad) 2009-Apr-10 20:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.562 (still bad) 2009-Apr-10 20:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2009-Apr-10 20:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2009-Apr-10 20:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.566 (still bad) 2009-Apr-10 20:11:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:11:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:11:27 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-10 20:11:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:11:27 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-10 20:11:27 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-10 20:11:27 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-10 20:11:27 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-10 20:11:27 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:11:27 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:11:27 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:11:27 LOG2 antvel: Parameters to Doppler: Topocentric 87087 2009 100 0.0 2009-Apr-10 20:11:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:11:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-10 20:11:27 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-10 20:11:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:11:27 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:11:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:11:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-10 20:11:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:11:27 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-10 20:11:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-10 20:11:27 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.030644 2009.2760883907522 18.999933 2009-Apr-10 20:11:27 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333382 23.724999999999987 2009-Apr-10 20:11:27 LOG4 log_alfabeam: ALFABEAM 1 8.985352895701499 23.622567841590854 2009-Apr-10 20:11:27 LOG4 log_alfabeam: ALFABEAM 2 8.989816290793229 23.698546687154369 2009-Apr-10 20:11:27 LOG4 log_alfabeam: ALFABEAM 3 8.987878507032441 23.801318970194018 2009-Apr-10 20:11:27 LOG4 log_alfabeam: ALFABEAM 4 8.981261780236874 23.827300159867555 2009-Apr-10 20:11:27 LOG4 log_alfabeam: ALFABEAM 5 8.976777327242482 23.749895642399434 2009-Apr-10 20:11:27 LOG4 log_alfabeam: ALFABEAM 6 8.978930091306456 23.647955945302805 2009-Apr-10 20:11:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000152 2009-Apr-10 20:11:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:11:28 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-10 20:11:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:11:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:11:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-10 20:11:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 689.00 2009-Apr-10 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.563 (still bad) 2009-Apr-10 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2009-Apr-10 20:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.565 (still bad) 2009-Apr-10 20:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.561 (still bad) 2009-Apr-10 20:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.565 (still bad) 2009-Apr-10 20:11:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:11:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:11:39 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-10 20:11:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:11:39 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-10 20:11:39 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-10 20:11:39 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-10 20:11:39 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-10 20:11:39 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:11:39 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:11:39 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:11:39 LOG2 antvel: Parameters to Doppler: Topocentric 87099 2009 100 0.0 2009-Apr-10 20:11:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:11:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-10 20:11:39 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-10 20:11:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:11:39 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:11:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:11:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-10 20:11:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:11:39 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-10 20:11:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-10 20:11:39 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.033986 2009.2760887710092 18.999933 2009-Apr-10 20:11:39 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333366 23.725000000000001 2009-Apr-10 20:11:39 LOG4 log_alfabeam: ALFABEAM 1 8.985418699871145 23.622816950526779 2009-Apr-10 20:11:39 LOG4 log_alfabeam: ALFABEAM 2 8.989833107789845 23.699335043346821 2009-Apr-10 20:11:39 LOG4 log_alfabeam: ALFABEAM 3 8.987829139862978 23.801867823173151 2009-Apr-10 20:11:39 LOG4 log_alfabeam: ALFABEAM 4 8.981196008398070 23.827044862083849 2009-Apr-10 20:11:39 LOG4 log_alfabeam: ALFABEAM 5 8.976761612293878 23.749099861226718 2009-Apr-10 20:11:39 LOG4 log_alfabeam: ALFABEAM 6 8.978979754097447 23.647424961591671 2009-Apr-10 20:11:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000153 2009-Apr-10 20:11:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:11:40 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-10 20:11:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:11:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:11:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-10 20:11:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 701.00 2009-Apr-10 20:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.565 (still bad) 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.559 (still bad) 2009-Apr-10 20:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2009-Apr-10 20:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.562 (still bad) 2009-Apr-10 20:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.562 (still bad) 2009-Apr-10 20:11:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.566 (still bad) 2009-Apr-10 20:11:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:11:51 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-10 20:11:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:11:51 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-10 20:11:51 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-10 20:11:51 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-10 20:11:51 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-10 20:11:51 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:11:51 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:11:51 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:11:51 LOG2 antvel: Parameters to Doppler: Topocentric 87111 2009 100 0.0 2009-Apr-10 20:11:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:11:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-10 20:11:51 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-10 20:11:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:11:51 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:11:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:11:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-10 20:11:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:11:51 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-10 20:11:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-10 20:11:51 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.037329 2009.2760891512662 18.999933 2009-Apr-10 20:11:51 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333368 23.724999999999994 2009-Apr-10 20:11:51 LOG4 log_alfabeam: ALFABEAM 1 8.985484241210340 23.623073635491881 2009-Apr-10 20:11:51 LOG4 log_alfabeam: ALFABEAM 2 8.989849394337387 23.700124236654766 2009-Apr-10 20:11:51 LOG4 log_alfabeam: ALFABEAM 3 8.987779493197680 23.802409841697163 2009-Apr-10 20:11:51 LOG4 log_alfabeam: ALFABEAM 4 8.981130507667757 23.826782017881701 2009-Apr-10 20:11:51 LOG4 log_alfabeam: ALFABEAM 5 8.976746435663074 23.748303509895749 2009-Apr-10 20:11:51 LOG4 log_alfabeam: ALFABEAM 6 8.979029672458163 23.646900854262309 2009-Apr-10 20:11:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000154 2009-Apr-10 20:11:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:11:52 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-10 20:11:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:11:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:11:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:11:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:11:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-10 20:11:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 713.00 2009-Apr-10 20:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.566 (still bad) 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:11:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.554 (still bad) 2009-Apr-10 20:11:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:11:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.359 1.459 1.399 1.403 2009-Apr-10 20:11:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.344 1.286 1.445 1.470 2009-Apr-10 20:11:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.467 1.555 1.409 1.516 2009-Apr-10 20:11:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.525 0.101 1.363 0.124 2009-Apr-10 20:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.556 (still bad) 2009-Apr-10 20:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.556 (still bad) 2009-Apr-10 20:12:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:12:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:12:03 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-10 20:12:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:12:03 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-10 20:12:03 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-10 20:12:03 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-10 20:12:03 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-10 20:12:03 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:12:03 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:12:03 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:12:03 LOG2 antvel: Parameters to Doppler: Topocentric 87123 2009 100 0.0 2009-Apr-10 20:12:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:12:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-10 20:12:03 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-10 20:12:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:12:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:12:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:12:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-10 20:12:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:12:03 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-10 20:12:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-10 20:12:03 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.040671 2009.2760895315232 18.999933 2009-Apr-10 20:12:03 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333409 23.725000000000016 2009-Apr-10 20:12:03 LOG4 log_alfabeam: ALFABEAM 1 8.985549467086347 23.623337641363726 2009-Apr-10 20:12:03 LOG4 log_alfabeam: ALFABEAM 2 8.989865139919957 23.700913611075741 2009-Apr-10 20:12:03 LOG4 log_alfabeam: ALFABEAM 3 8.987729609634091 23.802944615429176 2009-Apr-10 20:12:03 LOG4 log_alfabeam: ALFABEAM 4 8.981065330588395 23.826511888689502 2009-Apr-10 20:12:03 LOG4 log_alfabeam: ALFABEAM 5 8.976731806651800 23.747507250373403 2009-Apr-10 20:12:03 LOG4 log_alfabeam: ALFABEAM 6 8.979079803645384 23.646384014563854 2009-Apr-10 20:12:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000155 2009-Apr-10 20:12:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:12:04 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-10 20:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.551 (still bad) 2009-Apr-10 20:12:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:12:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:12:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-10 20:12:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 725.00 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.551 (still bad) 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:12:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.542 (still bad) 2009-Apr-10 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.541 (still bad) 2009-Apr-10 20:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.548 (still bad) 2009-Apr-10 20:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.541 (still bad) 2009-Apr-10 20:12:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:12:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:12:15 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-10 20:12:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:12:15 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-10 20:12:15 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-10 20:12:15 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-10 20:12:15 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-10 20:12:15 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:12:15 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:12:15 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:12:15 LOG2 antvel: Parameters to Doppler: Topocentric 87135 2009 100 0.0 2009-Apr-10 20:12:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:12:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-10 20:12:15 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-10 20:12:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:12:15 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:12:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:12:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-10 20:12:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:12:15 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-10 20:12:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-10 20:12:15 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.044014 2009.2760899117804 18.999933 2009-Apr-10 20:12:15 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333373 23.724999999999998 2009-Apr-10 20:12:15 LOG4 log_alfabeam: ALFABEAM 1 8.985614403385711 23.623609020255820 2009-Apr-10 20:12:15 LOG4 log_alfabeam: ALFABEAM 2 8.989880353548305 23.701703455918427 2009-Apr-10 20:12:15 LOG4 log_alfabeam: ALFABEAM 3 8.987679472310184 23.803472383546563 2009-Apr-10 20:12:15 LOG4 log_alfabeam: ALFABEAM 4 8.981000451229221 23.826234421298881 2009-Apr-10 20:12:15 LOG4 log_alfabeam: ALFABEAM 5 8.976717716365513 23.746710790654237 2009-Apr-10 20:12:15 LOG4 log_alfabeam: ALFABEAM 6 8.979130164708172 23.645874205718261 2009-Apr-10 20:12:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000156 2009-Apr-10 20:12:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:12:16 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-10 20:12:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:12:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:12:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.542 (still bad) 2009-Apr-10 20:12:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-10 20:12:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 737.00 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.542 (still bad) 2009-Apr-10 20:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-10 20:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.540 (still bad) 2009-Apr-10 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.541 (still bad) 2009-Apr-10 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-10 20:12:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:12:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:12:27 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-10 20:12:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:12:27 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-10 20:12:27 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-10 20:12:27 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-10 20:12:27 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-10 20:12:27 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:12:27 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:12:27 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:12:27 LOG2 antvel: Parameters to Doppler: Topocentric 87147 2009 100 0.0 2009-Apr-10 20:12:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:12:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-10 20:12:27 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-10 20:12:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:12:27 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:12:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:12:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-10 20:12:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:12:27 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-10 20:12:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-10 20:12:27 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.047356 2009.2760902920375 18.999933 2009-Apr-10 20:12:27 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333357 23.724999999999994 2009-Apr-10 20:12:27 LOG4 log_alfabeam: ALFABEAM 1 8.985678998408753 23.623887499859670 2009-Apr-10 20:12:27 LOG4 log_alfabeam: ALFABEAM 2 8.989895026065842 23.702493116672795 2009-Apr-10 20:12:27 LOG4 log_alfabeam: ALFABEAM 3 8.987629124280085 23.803992754765151 2009-Apr-10 20:12:27 LOG4 log_alfabeam: ALFABEAM 4 8.980935921176037 23.825949894174165 2009-Apr-10 20:12:27 LOG4 log_alfabeam: ALFABEAM 5 8.976704172736074 23.745914790370378 2009-Apr-10 20:12:27 LOG4 log_alfabeam: ALFABEAM 6 8.979180712518824 23.645371799990357 2009-Apr-10 20:12:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000157 2009-Apr-10 20:12:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:12:28 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-10 20:12:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:12:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:12:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-10 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.539 (still bad) 2009-Apr-10 20:12:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 749.00 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-10 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-10 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.545 (still bad) 2009-Apr-10 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.537 (still bad) 2009-Apr-10 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-10 20:12:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:12:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:12:39 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-10 20:12:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:12:39 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-10 20:12:39 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-10 20:12:39 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-10 20:12:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-10 20:12:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:12:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:12:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:12:39 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-10 20:12:39 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:12:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:12:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:12:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:12:39 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-10 20:12:39 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-10 20:12:39 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-10 20:12:39 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-10 20:12:39 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-10 20:12:39 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:12:39 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:12:39 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:12:39 LOG2 antvel: Parameters to Doppler: Topocentric 87159 2009 100 0.0 2009-Apr-10 20:12:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:12:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-10 20:12:39 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-10 20:12:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:12:39 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:12:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:12:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-10 20:12:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:12:39 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-10 20:12:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-10 20:12:39 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.050699 2009.2760906722945 18.999933 2009-Apr-10 20:12:39 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333389 23.724999999999998 2009-Apr-10 20:12:39 LOG4 log_alfabeam: ALFABEAM 1 8.985743278259738 23.624173132888103 2009-Apr-10 20:12:39 LOG4 log_alfabeam: ALFABEAM 2 8.989909166551952 23.703282885099014 2009-Apr-10 20:12:39 LOG4 log_alfabeam: ALFABEAM 3 8.987578548534673 23.804505970243820 2009-Apr-10 20:12:39 LOG4 log_alfabeam: ALFABEAM 4 8.980871714277287 23.825658253439151 2009-Apr-10 20:12:39 LOG4 log_alfabeam: ALFABEAM 5 8.976691166806571 23.745118954875561 2009-Apr-10 20:12:39 LOG4 log_alfabeam: ALFABEAM 6 8.979231464287068 23.644876558760718 2009-Apr-10 20:12:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000158 2009-Apr-10 20:12:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:12:40 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-10 20:12:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:12:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:12:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-10 20:12:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 761.00 2009-Apr-10 20:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.539 (still bad) 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.158 (still bad) 2009-Apr-10 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.156 (still bad) 2009-Apr-10 20:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.166 (still bad) 2009-Apr-10 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.159 (still bad) 2009-Apr-10 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.158 (still bad) 2009-Apr-10 20:12:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:12:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:12:51 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-10 20:12:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:12:51 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-10 20:12:51 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-10 20:12:51 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-10 20:12:51 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-10 20:12:51 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:12:51 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:12:51 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:12:51 LOG2 antvel: Parameters to Doppler: Topocentric 87171 2009 100 0.0 2009-Apr-10 20:12:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:12:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-10 20:12:51 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-10 20:12:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:12:51 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:12:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:12:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-10 20:12:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:12:51 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-10 20:12:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-10 20:12:51 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.054041 2009.2760910525515 18.999933 2009-Apr-10 20:12:51 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333416 23.725000000000001 2009-Apr-10 20:12:51 LOG4 log_alfabeam: ALFABEAM 1 8.985807192248934 23.624465630792333 2009-Apr-10 20:12:51 LOG4 log_alfabeam: ALFABEAM 2 8.989922767194209 23.704072109400165 2009-Apr-10 20:12:51 LOG4 log_alfabeam: ALFABEAM 3 8.987527788489899 23.805011658049736 2009-Apr-10 20:12:51 LOG4 log_alfabeam: ALFABEAM 4 8.980807881086367 23.825359793629726 2009-Apr-10 20:12:51 LOG4 log_alfabeam: ALFABEAM 5 8.976678705158339 23.744323940248268 2009-Apr-10 20:12:51 LOG4 log_alfabeam: ALFABEAM 6 8.979282376593252 23.644388835078164 2009-Apr-10 20:12:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000159 2009-Apr-10 20:12:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:12:52 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-10 20:12:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:12:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:12:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:12:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:12:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-10 20:12:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 773.00 2009-Apr-10 20:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.157 (still bad) 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:12:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:12:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:12:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.084 1.040 1.040 2009-Apr-10 20:12:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 0.942 1.063 1.079 2009-Apr-10 20:12:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 1.118 1.029 1.150 2009-Apr-10 20:12:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.101 0.969 0.125 2009-Apr-10 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:13:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:13:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:13:03 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-10 20:13:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:13:03 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-10 20:13:03 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-10 20:13:03 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-10 20:13:03 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-10 20:13:03 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:13:03 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:13:03 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:13:03 LOG2 antvel: Parameters to Doppler: Topocentric 87183 2009 100 0.0 2009-Apr-10 20:13:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:13:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-10 20:13:03 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-10 20:13:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:13:03 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-10 20:13:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:13:03 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-10 20:13:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-10 20:13:03 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.057383 2009.2760914328087 18.999933 2009-Apr-10 20:13:03 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333375 23.725000000000001 2009-Apr-10 20:13:03 LOG4 log_alfabeam: ALFABEAM 1 8.985870747748715 23.624764956741249 2009-Apr-10 20:13:03 LOG4 log_alfabeam: ALFABEAM 2 8.989935833293838 23.704860848204589 2009-Apr-10 20:13:03 LOG4 log_alfabeam: ALFABEAM 3 8.987476842229476 23.805509913261403 2009-Apr-10 20:13:03 LOG4 log_alfabeam: ALFABEAM 4 8.980744414152653 23.825054552101445 2009-Apr-10 20:13:03 LOG4 log_alfabeam: ALFABEAM 5 8.976666782278118 23.743529686402592 2009-Apr-10 20:13:03 LOG4 log_alfabeam: ALFABEAM 6 8.979333451531829 23.643908531201173 2009-Apr-10 20:13:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000160 2009-Apr-10 20:13:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:13:04 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-10 20:13:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:13:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:13:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-10 20:13:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 785.00 2009-Apr-10 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:13:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2009-Apr-10 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:13:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:13:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:13:15 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-10 20:13:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:13:15 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-10 20:13:15 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-10 20:13:15 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-10 20:13:15 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-10 20:13:15 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:13:15 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:13:15 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:13:15 LOG2 antvel: Parameters to Doppler: Topocentric 87195 2009 100 0.0 2009-Apr-10 20:13:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:13:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-10 20:13:15 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-10 20:13:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:13:15 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:13:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:13:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-10 20:13:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:13:15 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-10 20:13:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-10 20:13:15 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.060726 2009.2760918130657 18.999933 2009-Apr-10 20:13:15 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333400 23.725000000000001 2009-Apr-10 20:13:15 LOG4 log_alfabeam: ALFABEAM 1 8.985933952036106 23.625071078673265 2009-Apr-10 20:13:15 LOG4 log_alfabeam: ALFABEAM 2 8.989948369850696 23.705649161357897 2009-Apr-10 20:13:15 LOG4 log_alfabeam: ALFABEAM 3 8.987425707625105 23.806000827403007 2009-Apr-10 20:13:15 LOG4 log_alfabeam: ALFABEAM 4 8.980681306124703 23.824742561429030 2009-Apr-10 20:13:15 LOG4 log_alfabeam: ALFABEAM 5 8.976655392961421 23.742736132114516 2009-Apr-10 20:13:15 LOG4 log_alfabeam: ALFABEAM 6 8.979384691400636 23.643435553027292 2009-Apr-10 20:13:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000161 2009-Apr-10 20:13:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:13:16 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-10 20:13:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:13:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:13:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-10 20:13:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 797.00 2009-Apr-10 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:13:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:13:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:13:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:13:27 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-10 20:13:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:13:27 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-10 20:13:27 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-10 20:13:27 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-10 20:13:27 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-10 20:13:27 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:13:27 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:13:27 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:13:27 LOG2 antvel: Parameters to Doppler: Topocentric 87207 2009 100 0.0 2009-Apr-10 20:13:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:13:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-10 20:13:27 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-10 20:13:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:13:27 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:13:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:13:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-10 20:13:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:13:27 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-10 20:13:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-10 20:13:27 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.064068 2009.2760921933227 18.999933 2009-Apr-10 20:13:27 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333375 23.724999999999998 2009-Apr-10 20:13:27 LOG4 log_alfabeam: ALFABEAM 1 8.985996756064097 23.625383685578115 2009-Apr-10 20:13:27 LOG4 log_alfabeam: ALFABEAM 2 8.989960371026568 23.706436403321113 2009-Apr-10 20:13:27 LOG4 log_alfabeam: ALFABEAM 3 8.987374428460347 23.806484057895513 2009-Apr-10 20:13:27 LOG4 log_alfabeam: ALFABEAM 4 8.980618605881647 23.824424138325707 2009-Apr-10 20:13:27 LOG4 log_alfabeam: ALFABEAM 5 8.976644541814668 23.741943925959447 2009-Apr-10 20:13:27 LOG4 log_alfabeam: ALFABEAM 6 8.979436052514018 23.642970224573642 2009-Apr-10 20:13:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000162 2009-Apr-10 20:13:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:13:28 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-10 20:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:13:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:13:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:13:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-10 20:13:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 809.00 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.118 (still bad) 2009-Apr-10 20:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-10 20:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.122 (still bad) 2009-Apr-10 20:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-10 20:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-10 20:13:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:13:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:13:39 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-10 20:13:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:13:39 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-10 20:13:39 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-10 20:13:39 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-10 20:13:39 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-10 20:13:39 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:13:39 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:13:39 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:13:39 LOG2 antvel: Parameters to Doppler: Topocentric 87219 2009 100 0.0 2009-Apr-10 20:13:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:13:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-10 20:13:39 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-10 20:13:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:13:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:13:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:13:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-10 20:13:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:13:39 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-10 20:13:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-10 20:13:39 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.067411 2009.2760925735797 18.999933 2009-Apr-10 20:13:39 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333364 23.724999999999994 2009-Apr-10 20:13:39 LOG4 log_alfabeam: ALFABEAM 1 8.986059186529014 23.625702833590648 2009-Apr-10 20:13:39 LOG4 log_alfabeam: ALFABEAM 2 8.989971845992034 23.707222873370178 2009-Apr-10 20:13:39 LOG4 log_alfabeam: ALFABEAM 3 8.987322987225005 23.806959850336153 2009-Apr-10 20:13:39 LOG4 log_alfabeam: ALFABEAM 4 8.980556286673727 23.824099225297420 2009-Apr-10 20:13:39 LOG4 log_alfabeam: ALFABEAM 5 8.976634219813658 23.741152765348144 2009-Apr-10 20:13:39 LOG4 log_alfabeam: ALFABEAM 6 8.979487552610975 23.642512303242214 2009-Apr-10 20:13:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000163 2009-Apr-10 20:13:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:13:40 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-10 20:13:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:13:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:13:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-10 20:13:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-10 20:13:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 821.00 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:13:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-10 20:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-10 20:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2009-Apr-10 20:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-10 20:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-10 20:13:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:13:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:13:51 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-10 20:13:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:13:51 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-10 20:13:51 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-10 20:13:51 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-10 20:13:51 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-10 20:13:51 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:13:51 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:13:51 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:13:51 LOG2 antvel: Parameters to Doppler: Topocentric 87231 2009 100 0.0 2009-Apr-10 20:13:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:13:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-10 20:13:51 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-10 20:13:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:13:51 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:13:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:13:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-10 20:13:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:13:51 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-10 20:13:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-10 20:13:51 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.070753 2009.2760929538367 18.999933 2009-Apr-10 20:13:51 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333370 23.725000000000001 2009-Apr-10 20:13:51 LOG4 log_alfabeam: ALFABEAM 1 8.986121195553840 23.626028198056165 2009-Apr-10 20:13:51 LOG4 log_alfabeam: ALFABEAM 2 8.989982790188476 23.708007931517482 2009-Apr-10 20:13:51 LOG4 log_alfabeam: ALFABEAM 3 8.987271427832814 23.807427881784285 2009-Apr-10 20:13:51 LOG4 log_alfabeam: ALFABEAM 4 8.980494396190695 23.823768152494466 2009-Apr-10 20:13:51 LOG4 log_alfabeam: ALFABEAM 5 8.976624430290300 23.740363292492781 2009-Apr-10 20:13:51 LOG4 log_alfabeam: ALFABEAM 6 8.979539147940153 23.642062093700599 2009-Apr-10 20:13:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000164 2009-Apr-10 20:13:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:13:52 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-10 20:13:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:13:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:13:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:13:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:13:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-10 20:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-10 20:13:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 833.00 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:13:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2009-Apr-10 20:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-10 20:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2009-Apr-10 20:14:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-10 20:14:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 1.051 0.997 1.011 2009-Apr-10 20:14:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.918 1.005 1.055 2009-Apr-10 20:14:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.093 0.961 1.104 2009-Apr-10 20:14:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.100 0.945 0.124 2009-Apr-10 20:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-10 20:14:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:14:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:14:03 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-10 20:14:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:14:03 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-10 20:14:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-10 20:14:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-10 20:14:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-10 20:14:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:14:03 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-10 20:14:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:14:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-10 20:14:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:14:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:14:03 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-10 20:14:03 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-10 20:14:03 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-10 20:14:03 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-10 20:14:03 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:14:03 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:14:03 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:14:03 LOG2 antvel: Parameters to Doppler: Topocentric 87243 2009 100 0.0 2009-Apr-10 20:14:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:14:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-10 20:14:03 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-10 20:14:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:14:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:14:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:14:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-10 20:14:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:14:03 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-10 20:14:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-10 20:14:03 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.074096 2009.276093334094 18.999826 2009-Apr-10 20:14:03 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333341 23.725000000000001 2009-Apr-10 20:14:03 LOG4 log_alfabeam: ALFABEAM 1 8.986182821186746 23.626359909104707 2009-Apr-10 20:14:03 LOG4 log_alfabeam: ALFABEAM 2 8.989993214006587 23.708792076060369 2009-Apr-10 20:14:03 LOG4 log_alfabeam: ALFABEAM 3 8.987219722220157 23.807888523654821 2009-Apr-10 20:14:03 LOG4 log_alfabeam: ALFABEAM 4 8.980432895893573 23.823430785882962 2009-Apr-10 20:14:03 LOG4 log_alfabeam: ALFABEAM 5 8.976615163433078 23.739575005027763 2009-Apr-10 20:14:03 LOG4 log_alfabeam: ALFABEAM 6 8.979590866818231 23.641619230823746 2009-Apr-10 20:14:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000165 2009-Apr-10 20:14:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:14:04 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-10 20:14:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:14:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-10 20:14:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-10 20:14:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 845.00 2009-Apr-10 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.561 (still bad) 2009-Apr-10 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2009-Apr-10 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2009-Apr-10 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.560 (still bad) 2009-Apr-10 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.560 (still bad) 2009-Apr-10 20:14:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:14:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:14:15 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-10 20:14:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:14:15 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-10 20:14:15 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-10 20:14:15 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-10 20:14:15 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-10 20:14:15 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:14:15 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:14:15 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:14:15 LOG2 antvel: Parameters to Doppler: Topocentric 87255 2009 100 0.0 2009-Apr-10 20:14:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:14:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-10 20:14:15 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-10 20:14:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:14:15 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:14:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:14:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-10 20:14:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:14:15 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-10 20:14:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-10 20:14:15 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.077438 2009.276093714351 18.999933 2009-Apr-10 20:14:15 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333350 23.724999999999998 2009-Apr-10 20:14:15 LOG4 log_alfabeam: ALFABEAM 1 8.986243983449821 23.626697414066737 2009-Apr-10 20:14:15 LOG4 log_alfabeam: ALFABEAM 2 8.990003110463277 23.709574086916835 2009-Apr-10 20:14:15 LOG4 log_alfabeam: ALFABEAM 3 8.987167945253248 23.808341099429594 2009-Apr-10 20:14:15 LOG4 log_alfabeam: ALFABEAM 4 8.980371866863115 23.823087690788132 2009-Apr-10 20:14:15 LOG4 log_alfabeam: ALFABEAM 5 8.976606423746640 23.738789126298265 2009-Apr-10 20:14:15 LOG4 log_alfabeam: ALFABEAM 6 8.979642634555724 23.641184363990060 2009-Apr-10 20:14:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000166 2009-Apr-10 20:14:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:14:16 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-10 20:14:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:14:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-10 20:14:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-10 20:14:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 857.00 2009-Apr-10 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.563 (still bad) 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-10 20:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.559 (still bad) 2009-Apr-10 20:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.571 (still bad) 2009-Apr-10 20:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.558 (still bad) 2009-Apr-10 20:14:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:14:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:14:27 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-10 20:14:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:14:27 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-10 20:14:27 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-10 20:14:27 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-10 20:14:27 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-10 20:14:27 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:14:27 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:14:27 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:14:27 LOG2 antvel: Parameters to Doppler: Topocentric 87267 2009 100 0.0 2009-Apr-10 20:14:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:14:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-10 20:14:27 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-10 20:14:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:14:27 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:14:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:14:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-10 20:14:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:14:27 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-10 20:14:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-10 20:14:27 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.080781 2009.276094094608 18.999933 2009-Apr-10 20:14:27 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333348 23.724999999999998 2009-Apr-10 20:14:27 LOG4 log_alfabeam: ALFABEAM 1 8.986304742848498 23.627040989353830 2009-Apr-10 20:14:27 LOG4 log_alfabeam: ALFABEAM 2 8.990012492366828 23.710354857161207 2009-Apr-10 20:14:27 LOG4 log_alfabeam: ALFABEAM 3 8.987116047985936 23.808786230459454 2009-Apr-10 20:14:27 LOG4 log_alfabeam: ALFABEAM 4 8.980311247230642 23.822738581888249 2009-Apr-10 20:14:27 LOG4 log_alfabeam: ALFABEAM 5 8.976598199856674 23.738004757815244 2009-Apr-10 20:14:27 LOG4 log_alfabeam: ALFABEAM 6 8.979694500389682 23.640756884515604 2009-Apr-10 20:14:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000167 2009-Apr-10 20:14:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:14:28 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-10 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.556 (still bad) 2009-Apr-10 20:14:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:14:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-10 20:14:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-10 20:14:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 869.00 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.563 (still bad) 2009-Apr-10 20:14:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.557 (still bad) 2009-Apr-10 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.555 (still bad) 2009-Apr-10 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.557 (still bad) 2009-Apr-10 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.555 (still bad) 2009-Apr-10 20:14:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:14:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:14:39 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-10 20:14:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:14:39 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-10 20:14:39 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-10 20:14:39 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-10 20:14:39 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-10 20:14:39 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:14:39 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:14:39 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:14:39 LOG2 antvel: Parameters to Doppler: Topocentric 87279 2009 100 0.0 2009-Apr-10 20:14:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:14:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-10 20:14:39 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-10 20:14:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:14:39 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:14:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:14:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-10 20:14:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:14:39 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-10 20:14:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-10 20:14:39 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.084123 2009.276094474865 18.999933 2009-Apr-10 20:14:39 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333364 23.724999999999994 2009-Apr-10 20:14:39 LOG4 log_alfabeam: ALFABEAM 1 8.986365042882356 23.627390214526852 2009-Apr-10 20:14:39 LOG4 log_alfabeam: ALFABEAM 2 8.990021356383211 23.711133565370968 2009-Apr-10 20:14:39 LOG4 log_alfabeam: ALFABEAM 3 8.987064084632491 23.809223508419556 2009-Apr-10 20:14:39 LOG4 log_alfabeam: ALFABEAM 4 8.980251093710526 23.822383887128829 2009-Apr-10 20:14:39 LOG4 log_alfabeam: ALFABEAM 5 8.976590493472294 23.737222722277263 2009-Apr-10 20:14:39 LOG4 log_alfabeam: ALFABEAM 6 8.979746410373194 23.640337180118323 2009-Apr-10 20:14:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000168 2009-Apr-10 20:14:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:14:40 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-10 20:14:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:14:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-10 20:14:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.552 (still bad) 2009-Apr-10 20:14:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-10 20:14:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 881.00 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:14:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.552 (still bad) 2009-Apr-10 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.550 (still bad) 2009-Apr-10 20:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.550 (still bad) 2009-Apr-10 20:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.550 (still bad) 2009-Apr-10 20:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.551 (still bad) 2009-Apr-10 20:14:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:14:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:14:51 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-10 20:14:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:14:51 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-10 20:14:51 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-10 20:14:51 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-10 20:14:51 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-10 20:14:51 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:14:51 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27609 J 2009-Apr-10 20:14:51 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:14:51 LOG2 antvel: Parameters to Doppler: Topocentric 87291 2009 100 0.0 2009-Apr-10 20:14:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:14:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-10 20:14:51 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-10 20:14:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:14:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:14:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:14:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-10 20:14:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:14:51 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-10 20:14:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-10 20:14:51 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.087466 2009.276094855122 18.999933 2009-Apr-10 20:14:51 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333364 23.725000000000001 2009-Apr-10 20:14:51 LOG4 log_alfabeam: ALFABEAM 1 8.986424910972339 23.627745153612132 2009-Apr-10 20:14:51 LOG4 log_alfabeam: ALFABEAM 2 8.990029711597142 23.711910521755264 2009-Apr-10 20:14:51 LOG4 log_alfabeam: ALFABEAM 3 8.987012036860694 23.809653182363846 2009-Apr-10 20:14:51 LOG4 log_alfabeam: ALFABEAM 4 8.980191378827110 23.822023540865935 2009-Apr-10 20:14:51 LOG4 log_alfabeam: ALFABEAM 5 8.976583295697381 23.736442705784953 2009-Apr-10 20:14:51 LOG4 log_alfabeam: ALFABEAM 6 8.979798383086148 23.639925005451637 2009-Apr-10 20:14:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000169 2009-Apr-10 20:14:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:14:52 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-10 20:14:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:14:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-10 20:14:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:14:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:14:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-10 20:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.548 (still bad) 2009-Apr-10 20:14:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 893.00 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.537 (still bad) 2009-Apr-10 20:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.535 (still bad) 2009-Apr-10 20:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.544 (still bad) 2009-Apr-10 20:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-10 20:15:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:15:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.332 1.439 1.372 1.389 2009-Apr-10 20:15:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.336 1.280 1.416 1.460 2009-Apr-10 20:15:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.431 1.537 1.366 1.492 2009-Apr-10 20:15:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.510 0.101 1.347 0.124 2009-Apr-10 20:15:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:15:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:15:03 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-10 20:15:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:15:03 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-10 20:15:03 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-10 20:15:03 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-10 20:15:03 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-10 20:15:03 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:15:03 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27610 J 2009-Apr-10 20:15:03 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:15:03 LOG2 antvel: Parameters to Doppler: Topocentric 87303 2009 100 0.0 2009-Apr-10 20:15:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:15:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-10 20:15:03 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-10 20:15:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:15:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:15:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:15:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:15:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-10 20:15:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:15:03 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-10 20:15:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-10 20:15:03 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.090808 2009.2760952353792 18.999933 2009-Apr-10 20:15:03 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333324 23.725000000000001 2009-Apr-10 20:15:03 LOG4 log_alfabeam: ALFABEAM 1 8.986484303023481 23.628105447709832 2009-Apr-10 20:15:03 LOG4 log_alfabeam: ALFABEAM 2 8.990037557056157 23.712685108879342 2009-Apr-10 20:15:03 LOG4 log_alfabeam: ALFABEAM 3 8.986959948453828 23.810074987533760 2009-Apr-10 20:15:03 LOG4 log_alfabeam: ALFABEAM 4 8.980132146437796 23.821657906807761 2009-Apr-10 20:15:03 LOG4 log_alfabeam: ALFABEAM 5 8.976576606296168 23.735665325700399 2009-Apr-10 20:15:03 LOG4 log_alfabeam: ALFABEAM 6 8.979850375083620 23.639520608174745 2009-Apr-10 20:15:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000170 2009-Apr-10 20:15:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:15:04 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-10 20:15:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:15:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-10 20:15:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:15:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:15:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:15:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-10 20:15:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 905.00 2009-Apr-10 20:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.538 (still bad) 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:15:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.533 (still bad) 2009-Apr-10 20:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.534 (still bad) 2009-Apr-10 20:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.534 (still bad) 2009-Apr-10 20:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.535 (still bad) 2009-Apr-10 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.537 (still bad) 2009-Apr-10 20:15:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:15:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:15:15 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-10 20:15:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:15:15 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-10 20:15:15 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-10 20:15:15 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-10 20:15:15 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-10 20:15:15 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:15:15 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27610 J 2009-Apr-10 20:15:15 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:15:15 LOG2 antvel: Parameters to Doppler: Topocentric 87315 2009 100 0.0 2009-Apr-10 20:15:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:15:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-10 20:15:15 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-10 20:15:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:15:15 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:15:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:15:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:15:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-10 20:15:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-10 20:15:15 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-10 20:15:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-10 20:15:15 LOG5 log_alfabeam: Parameters: 8.9833333333333325 23.724999999999998 9.094151 2009.2760956156362 18.999933 2009-Apr-10 20:15:15 LOG4 log_alfabeam: ALFABEAM 0 8.983333333333366 23.725000000000001 2009-Apr-10 20:15:15 LOG4 log_alfabeam: ALFABEAM 1 8.986543246683420 23.628471164375860 2009-Apr-10 20:15:15 LOG4 log_alfabeam: ALFABEAM 2 8.990044901761481 23.713457640866249 2009-Apr-10 20:15:15 LOG4 log_alfabeam: ALFABEAM 3 8.986907800763207 23.810489173497693 2009-Apr-10 20:15:15 LOG4 log_alfabeam: ALFABEAM 4 8.980073368841666 23.821286915694728 2009-Apr-10 20:15:15 LOG4 log_alfabeam: ALFABEAM 5 8.976570416472761 23.734890264126825 2009-Apr-10 20:15:15 LOG4 log_alfabeam: ALFABEAM 6 8.979902405264351 23.639123742686809 2009-Apr-10 20:15:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 910000171 2009-Apr-10 20:15:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-10 20:15:16 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-10 20:15:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:15:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-10 20:15:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:15:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:15:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:15:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-10 20:15:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 917.00 2009-Apr-10 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.537 (still bad) 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:15:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.530 (still bad) 2009-Apr-10 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.534 (still bad) 2009-Apr-10 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.533 (still bad) 2009-Apr-10 20:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.533 (still bad) 2009-Apr-10 20:15:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.533 (still bad) 2009-Apr-10 20:15:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-10 20:15:27 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-10 20:15:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-10 20:15:27 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-10 20:15:27 INFO2 smartfreq: Switching off CAL 2009-Apr-10 20:15:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:15:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:15:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:15:27 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-10 20:15:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:15:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:15:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:15:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:15:27 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-10 20:15:27 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-10 20:15:27 LOG5 antvel: Calling 'antvel 85900.000000 234330.000000 J Topocentric 0' 2009-Apr-10 20:15:27 LOG2 antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27610 J 2009-Apr-10 20:15:27 LOG2 antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:15:27 LOG2 antvel: Parameters to Doppler: Topocentric 87327 2009 100 0.0 2009-Apr-10 20:15:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:15:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-10 20:15:27 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-10 20:15:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:15:27 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:15:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:15:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:15:27 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-10 20:15:27 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-10 20:15:27 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-10 20:15:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:15:27 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-10 20:15:27 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-10 20:15:27 NOTE run_command_file: DONE with command file processing 2009-Apr-10 20:15:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-10 20:15:28 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-10 20:15:28 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-10 20:15:28 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-10 20:15:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:15:28 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-10 20:15:28 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-10 20:15:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:15:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:15:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:15:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.533 (still bad) 2009-Apr-10 20:15:44 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-10 20:15:44 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-10 20:15:44 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-10 20:15:44 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-10 20:15:44 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-10 20:15:44 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-10 20:15:44 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-10 20:15:44 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-10 20:15:44 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-10 20:15:44 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-10 20:15:44 LOG3 exec_msg: Closing socket 2009-Apr-10 20:15:44 LOG3 exec_msg: Closing socket 2009-Apr-10 20:15:44 LOG3 exec_msg: Closing socket 2009-Apr-10 20:15:44 LOG3 exec_msg: Closing socket 2009-Apr-10 20:15:47 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-10 20:15:47 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-10 20:15:47 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-10 20:15:47 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-10 20:16:01 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-10 20:16:02 LOG2 CIMA-antvel: Precessing RA = 08:59:00.0 Dec = +23:43:30.0 Epoch = 2009.27610 J 2009-Apr-10 20:16:02 LOG2 CIMA-antvel: Computed apparent RA = 08:59:33.9 Dec = +23:41:19.5 2009-Apr-10 20:16:02 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 87362 2009 100 0.0 2009-Apr-10 20:16:02 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-10 20:16:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-10 20:16:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-10 20:16:04 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-10 20:16:04 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-10 20:16:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-10 20:16:04 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-10 20:16:04 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-10 20:16:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-10 20:16:04 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-10 20:16:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:16:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:16:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:16:04 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-10 20:16:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:16:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:16:04 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-10 20:16:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:16:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:16:04 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-10 20:16:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-10 20:16:04 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-10 20:16:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-10 20:16:04 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-10 20:16:04 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-10 20:16:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-10 20:16:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:16:04 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-10 20:16:04 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-10 20:16:04 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-10 20:16:04 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-10 20:16:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-10 20:16:04 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-10 20:16:04 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-10 20:16:04 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-10 20:16:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:16:04 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-10 20:16:04 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-10 20:16:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-10 20:16:05 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-10 20:16:05 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-10 20:16:05 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-10 20:16:05 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-10 20:16:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-10 20:16:05 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-10 20:16:05 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-10 20:16:05 START begin_task: Starting task 'selecting calibration port' 2009-Apr-10 20:16:05 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-10 20:16:05 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-10 20:16:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-10 20:16:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:16:05 START begin_task: Starting task 'waiting on calport' 2009-Apr-10 20:16:05 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-10 20:16:05 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-10 20:16:05 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-10 20:16:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:16:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:05 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:16:05 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-10 20:16:05 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-10 20:16:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-10 20:16:05 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-10 20:16:05 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-10 20:16:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:16:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:16:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:16:05 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-10 20:16:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:05 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:16:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:16:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:16:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:16:05 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-10 20:16:05 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:16:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:16:06 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-10 20:16:06 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-10 20:16:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:16:06 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-10 20:16:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-10 20:16:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:16:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-10 20:16:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:16:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:16:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:16:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:16:06 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-10 20:16:06 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-10 20:16:06 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-10 20:16:06 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-10 20:16:06 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-10 20:16:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:16:06 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-10 20:16:06 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-10 20:16:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-10 20:16:06 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-10 20:16:06 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-10 20:16:06 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-10 20:16:06 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-10 20:16:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-10 20:16:06 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-10 20:16:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-10 20:16:06 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-10 20:16:06 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-10 20:16:06 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-10 20:16:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:16:06 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-10 20:16:06 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-10 20:16:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-10 20:16:07 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-10 20:16:07 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-10 20:16:42 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-10 20:16:42 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-10 20:16:42 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-10 20:16:42 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-10 20:16:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-10 20:16:42 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-10 20:16:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-10 20:16:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-10 20:16:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:16:42 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-10 20:16:42 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-10 20:16:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-10 20:16:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:16:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:16:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-10 20:16:45 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-10 20:16:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-10 20:16:45 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-10 20:16:45 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-10 20:16:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-10 20:16:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:16:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:16:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:16:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:16:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-10 20:16:45 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-10 20:16:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-10 20:16:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-10 20:16:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 4 dB 2009-Apr-10 20:16:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-10 20:16:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-10 20:16:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-10 20:16:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-10 20:16:46 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-10 20:16:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.967 1.064 ALFA beam 1: 1.014 1.031 2009-Apr-10 20:16:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.963 0.933 ALFA beam 3: 1.007 1.042 2009-Apr-10 20:16:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.010 1.072 ALFA beam 5: 0.984 0.870 2009-Apr-10 20:16:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.049 0.098 ALFA beam 7: 0.943 0.121 2009-Apr-10 20:16:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-10 20:16:46 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-10 20:16:46 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-10 20:16:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:16:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-10 20:16:46 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-10 20:16:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-10 20:16:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-10 20:16:46 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-10 20:16:46 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-10 20:16:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-10 20:16:46 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-10 20:16:46 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-10 20:16:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-10 20:16:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.064 1.014 1.031 2009-Apr-10 20:16:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.933 1.007 1.042 2009-Apr-10 20:16:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.072 0.984 0.870 2009-Apr-10 20:16:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.098 0.943 0.121 2009-Apr-10 20:16:51 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-10 20:16:51 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift98p1 090700.0 +234330 J 0 Topocentric velocity(optical) 2009-Apr-10 20:16:51 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift98p1 090700.0 +234330 J 0 Topocentric velocity(optical)' 2009-Apr-10 20:16:51 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-10 20:16:51 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-10 20:16:51 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Apr-10 20:16:51 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-10 20:16:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift98p1} 2009-Apr-10 20:16:52 INFO5 fixed_driftmap: Start: year = 2009.2760986576925 RA = 09:07:33.8 Dec = +23:41:14.6 2009-Apr-10 20:16:52 NOTE fixed_driftmap: Setting ZA to 5:20:00.9 ... 2009-Apr-10 20:16:52 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 5.33 2009-Apr-10 20:16:52 LOG3 track_source: Calling 'track_source drift98p1 180.0 5.3335967425 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-10 20:16:52 START begin_task: Starting task 'sending tracking commands' 2009-Apr-10 20:16:52 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-10 20:16:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift98p1} INFO {Slewing to source 'drift98p1' ...} 2009-Apr-10 20:16:52 INFO1 track_source: Starting to track drift98p1 2009-Apr-10 20:16:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift98p1" 2009-Apr-10 20:16:52 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-10 20:16:52 LOG3 vw_send: To DATATAKING: set dec 5.3335967425 2009-Apr-10 20:16:52 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-10 20:16:52 LOG3 vw_send: To DATATAKING: pnt tr 180.0 5.3335967425 -CF 2009-Apr-10 20:16:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-10 20:16:52 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-10 20:16:52 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-10 20:16:52 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-10 20:16:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:16:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-10 20:16:52 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-10 20:16:52 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-10 20:16:52 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-10 20:16:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-10 20:16:52 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-10 20:16:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-10 20:16:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-10 20:16:52 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-10 20:16:52 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift98p1" 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: set dec 5.3335967425 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: vw% 5.3335967425 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 5.3335967425 -CF 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-10 20:16:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:16:53 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-10 20:16:53 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-10 20:16:53 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-10 20:16:53 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-10 20:16:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-10 20:16:53 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-10 20:16:53 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-10 20:16:53 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-10 20:16:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:16:53 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-10 20:16:53 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-10 20:16:53 START begin_task: Starting task 'waiting on telescope' 2009-Apr-10 20:16:53 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-10 20:16:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-10 20:16:53 LOG3 waittrk: Start waittrk 5 2009-Apr-10 20:16:53 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-10 20:16:53 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-10 20:16:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-10 20:16:58 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-10 20:16:58 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-10 20:16:58 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-10 20:17:50 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-10 20:17:50 INFO2 waittrk: Now tracking drift98p1 2009-Apr-10 20:17:50 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 5.36 2009-Apr-10 20:17:50 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-10 20:17:50 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-10 20:17:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:17:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-10 20:17:50 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 START begin_task: Starting task 'selecting calibration type' 2009-Apr-10 20:17:50 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-10 20:17:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-10 20:17:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:17:50 START begin_task: Starting task 'waiting on setcal' 2009-Apr-10 20:17:50 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-10 20:17:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:17:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:17:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-10 20:17:50 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-10 20:17:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:17:50 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-10 20:17:50 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:17:50 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-10 20:17:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:17:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:17:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:17:51 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-10 20:17:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:17:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-10 20:17:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:17:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:17:51 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:17:51 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-10 20:17:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:17:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:17:51 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-10 20:17:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:17:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:17:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-10 20:17:51 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-10 20:17:51 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-10 20:17:51 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-10 20:17:51 LOG5 antvel: Calling 'antvel 180.000000 5.333597 F Topocentric 0' 2009-Apr-10 20:17:51 LOG2 antvel: Transforming current Az = 180.00 ZA = 5.33 to apparent RA = 09:08:14.4 Dec = +23:41:14.7 2009-Apr-10 20:17:51 LOG2 antvel: Parameters to Doppler: Topocentric 87470 2009 100 0.0 2009-Apr-10 20:17:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-10 20:17:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-10 20:17:51 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-10 20:17:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-10 20:17:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-10 20:17:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:17:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:17:51 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-10 20:17:51 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-10 20:17:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-10 20:17:51 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-10 20:17:51 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-10 20:17:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-10 20:17:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:17:51 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-10 20:17:51 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-10 20:17:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-10 20:17:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-10 20:17:51 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-10 20:17:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:17:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:17:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:17:54 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:17:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-10 20:17:54 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-10 20:17:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-10 20:17:54 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-10 20:17:54 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-10 20:17:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-10 20:17:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:17:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:17:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:17:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-10 20:17:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-10 20:17:54 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-10 20:17:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-10 20:17:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:17:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-10 20:17:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-10 20:17:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-10 20:17:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-10 20:17:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-10 20:17:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-10 20:17:55 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-10 20:17:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.963 1.058 ALFA beam 1: 1.008 1.018 2009-Apr-10 20:17:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.948 0.913 ALFA beam 3: 1.021 1.057 2009-Apr-10 20:17:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.033 1.102 ALFA beam 5: 0.988 1.104 2009-Apr-10 20:17:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.062 0.100 ALFA beam 7: 0.946 0.123 2009-Apr-10 20:17:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-10 20:17:55 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-10 20:17:55 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-10 20:17:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:17:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-10 20:17:55 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-10 20:17:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-10 20:17:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-10 20:17:55 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-10 20:17:55 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-10 20:17:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:17:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-10 20:17:55 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-10 20:17:55 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:07:33.8 LST = 09:08:18.4 diff = -44.5 secs 2009-Apr-10 20:17:55 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Apr-10 20:17:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:17:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:17:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:17:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:17:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-10 20:17:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-10 20:17:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-10 20:17:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-10 20:17:55 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:17:55 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-10 20:17:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-10 20:17:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:17:55 INFO2 take_data: Starting WAPP 600-second scan: 910000172 2009-Apr-10 20:17:56 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:17:56 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-10 20:17:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:17:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20090410.a2010.0018.fits 2009-Apr-10 20:17:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:17:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090410.a2010.0018.fits} 2009-Apr-10 20:17:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-10 20:17:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1077.00 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:17:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-10 20:17:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.058 1.008 1.018 2009-Apr-10 20:17:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.913 1.021 1.057 2009-Apr-10 20:17:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 1.102 0.988 1.104 2009-Apr-10 20:17:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.100 0.946 0.123 2009-Apr-10 20:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-10 20:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-10 20:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-10 20:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-10 20:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-10 20:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-10 20:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-10 20:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-10 20:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-10 20:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-10 20:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-10 20:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-10 20:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:19:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-10 20:19:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.066 1.016 1.024 2009-Apr-10 20:19:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.917 1.028 1.062 2009-Apr-10 20:19:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.099 0.990 1.126 2009-Apr-10 20:19:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.100 0.948 0.123 2009-Apr-10 20:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.123 (still bad) 2009-Apr-10 20:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-10 20:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-10 20:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-10 20:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-10 20:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-10 20:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:20:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-10 20:20:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.061 1.011 1.022 2009-Apr-10 20:20:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.915 1.025 1.060 2009-Apr-10 20:20:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.095 0.984 1.125 2009-Apr-10 20:20:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.100 0.945 0.123 2009-Apr-10 20:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.121 (still bad) 2009-Apr-10 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-10 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-10 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.122 (still bad) 2009-Apr-10 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.122 (still bad) 2009-Apr-10 20:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-10 20:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.122 (still bad) 2009-Apr-10 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.123 (still bad) 2009-Apr-10 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-10 20:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-10 20:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.125 (still bad) 2009-Apr-10 20:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.123 (still bad) 2009-Apr-10 20:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.125 (still bad) 2009-Apr-10 20:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:21:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:21:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.064 1.011 1.024 2009-Apr-10 20:21:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.916 1.024 1.063 2009-Apr-10 20:21:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.095 0.986 1.126 2009-Apr-10 20:21:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.101 0.948 0.124 2009-Apr-10 20:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.125 (still bad) 2009-Apr-10 20:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-10 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-10 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-10 20:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.124 (still bad) 2009-Apr-10 20:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:22:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:22:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.070 1.012 1.023 2009-Apr-10 20:22:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.912 1.024 1.064 2009-Apr-10 20:22:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.098 0.990 1.126 2009-Apr-10 20:22:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.101 0.987 0.124 2009-Apr-10 20:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-10 20:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-10 20:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-10 20:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.137 (still bad) 2009-Apr-10 20:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-10 20:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-10 20:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-10 20:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:23:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:23:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.066 1.014 1.026 2009-Apr-10 20:23:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 0.936 1.025 1.066 2009-Apr-10 20:23:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.096 0.990 1.130 2009-Apr-10 20:23:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.101 0.949 0.124 2009-Apr-10 20:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-10 20:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-10 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.154 (still bad) 2009-Apr-10 20:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.208 (still bad) 2009-Apr-10 20:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.255 (still bad) 2009-Apr-10 20:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.274 (still bad) 2009-Apr-10 20:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.278 (still bad) 2009-Apr-10 20:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.259 (still bad) 2009-Apr-10 20:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.214 (still bad) 2009-Apr-10 20:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.160 (still bad) 2009-Apr-10 20:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-10 20:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-10 20:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.150 (still bad) 2009-Apr-10 20:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.204 (still bad) 2009-Apr-10 20:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.224 (still bad) 2009-Apr-10 20:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.224 (still bad) 2009-Apr-10 20:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.207 (still bad) 2009-Apr-10 20:24:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:24:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.065 1.017 1.029 2009-Apr-10 20:24:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.917 1.025 1.065 2009-Apr-10 20:24:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.098 0.991 1.129 2009-Apr-10 20:24:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.179 0.101 1.052 0.124 2009-Apr-10 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2009-Apr-10 20:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-10 20:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-10 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.126 (still bad) 2009-Apr-10 20:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2009-Apr-10 20:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2009-Apr-10 20:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.154 (still bad) 2009-Apr-10 20:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.156 (still bad) 2009-Apr-10 20:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2009-Apr-10 20:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.151 (still bad) 2009-Apr-10 20:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:25:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:25:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.066 1.017 1.027 2009-Apr-10 20:25:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.914 1.024 1.061 2009-Apr-10 20:25:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.094 0.993 1.132 2009-Apr-10 20:25:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.101 0.952 0.124 2009-Apr-10 20:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-10 20:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:26:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:26:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.066 1.014 1.022 2009-Apr-10 20:26:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.910 1.027 1.064 2009-Apr-10 20:26:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.090 0.990 1.129 2009-Apr-10 20:26:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.101 0.952 0.124 2009-Apr-10 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:27:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:27:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.064 1.014 1.024 2009-Apr-10 20:27:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.912 1.023 1.064 2009-Apr-10 20:27:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.092 0.988 1.129 2009-Apr-10 20:27:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.101 0.950 0.124 2009-Apr-10 20:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:27:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:27:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:27:57 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-10 20:27:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:27:57 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-10 20:27:57 LOG1 fixed_driftmap: New position: year = 2009.2761197619591 RA = 09:17:50.1 RA/Dec = 09:18:23.8 +23:41:08.3 2009-Apr-10 20:27:57 NOTE fixed_driftmap: Correcting ZA to 5:19:54.6 ... 2009-Apr-10 20:27:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.3318239016 -CF 2009-Apr-10 20:27:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-10 20:27:57 START begin_task: Starting task 'WAPP calibration' 2009-Apr-10 20:27:57 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-10 20:27:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-10 20:27:57 START begin_task: Starting task 'selecting calibration type' 2009-Apr-10 20:27:57 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-10 20:27:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-10 20:27:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-10 20:27:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:27:57 START begin_task: Starting task 'waiting on setcal' 2009-Apr-10 20:27:57 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-10 20:27:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.3318239016 -CF 2009-Apr-10 20:27:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:27:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-10 20:27:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:27:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:27:57 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:27:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-10 20:27:57 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-10 20:27:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-10 20:27:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:27:57 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-10 20:27:57 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:27:57 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-10 20:27:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:27:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:27:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:27:58 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:27:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-10 20:27:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:27:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:27:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:27:58 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:27:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:27:58 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:27:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:27:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-10 20:27:58 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-10 20:27:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-10 20:27:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-10 20:27:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:27:58 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:27:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-10 20:27:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:27:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:27:58 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-10 20:27:58 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:27:58 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-10 20:27:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:27:58 INFO2 take_data: Starting WAPP 1-second scan: 910000173 2009-Apr-10 20:27:58 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:27:58 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-10 20:27:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:27:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-10 20:27:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1679.00 2009-Apr-10 20:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:28:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:28:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:28:00 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-10 20:28:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:28:00 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-10 20:28:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-10 20:28:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:28:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:28:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:28:00 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-10 20:28:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:28:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:28:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:28:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:28:01 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-10 20:28:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-10 20:28:01 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-10 20:28:01 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-10 20:28:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-10 20:28:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:28:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-10 20:28:01 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-10 20:28:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-10 20:28:01 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-10 20:28:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:28:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:28:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:28:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:28:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-10 20:28:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-10 20:28:01 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:28:01 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-10 20:28:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-10 20:28:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:28:01 INFO2 take_data: Starting WAPP 600-second scan: 910000174 2009-Apr-10 20:28:01 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:28:01 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-10 20:28:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:28:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.549 (still bad) 2009-Apr-10 20:28:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-10 20:28:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1682.00 2009-Apr-10 20:28:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20090410.a2010.0019.fits 2009-Apr-10 20:28:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090410.a2010.0019.fits} 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:28:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:28:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.069 1.015 1.027 2009-Apr-10 20:28:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.917 1.028 1.068 2009-Apr-10 20:28:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.098 0.992 1.132 2009-Apr-10 20:28:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.101 0.953 0.124 2009-Apr-10 20:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:29:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.074 1.021 1.032 2009-Apr-10 20:29:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.918 1.029 1.066 2009-Apr-10 20:29:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.102 0.995 1.138 2009-Apr-10 20:29:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.101 0.959 0.124 2009-Apr-10 20:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.127 (still bad) 2009-Apr-10 20:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-10 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-10 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-10 20:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.135 (still bad) 2009-Apr-10 20:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:30:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:30:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 1.074 1.021 1.032 2009-Apr-10 20:30:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 0.930 1.029 1.063 2009-Apr-10 20:30:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.103 0.994 1.139 2009-Apr-10 20:30:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.101 0.957 0.124 2009-Apr-10 20:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-10 20:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.158 (still bad) 2009-Apr-10 20:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.164 (still bad) 2009-Apr-10 20:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.165 (still bad) 2009-Apr-10 20:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.154 (still bad) 2009-Apr-10 20:31:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:31:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.069 1.018 1.027 2009-Apr-10 20:31:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.913 1.025 1.055 2009-Apr-10 20:31:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.095 0.993 1.133 2009-Apr-10 20:31:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.135 0.101 1.014 0.124 2009-Apr-10 20:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-10 20:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2009-Apr-10 20:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:32:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:32:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.070 1.017 1.025 2009-Apr-10 20:32:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.913 1.026 1.058 2009-Apr-10 20:32:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.096 0.991 1.133 2009-Apr-10 20:32:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.101 0.953 0.124 2009-Apr-10 20:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2009-Apr-10 20:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.149 (still bad) 2009-Apr-10 20:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-10 20:33:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:33:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.066 1.016 1.026 2009-Apr-10 20:33:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.918 1.024 1.055 2009-Apr-10 20:33:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.100 0.990 1.131 2009-Apr-10 20:33:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.101 0.951 0.124 2009-Apr-10 20:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2009-Apr-10 20:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:34:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.066 1.019 1.028 2009-Apr-10 20:34:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.916 1.027 1.057 2009-Apr-10 20:34:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.104 0.993 1.133 2009-Apr-10 20:34:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.101 0.955 0.124 2009-Apr-10 20:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:35:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.067 1.018 1.028 2009-Apr-10 20:35:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.920 1.028 1.059 2009-Apr-10 20:35:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.107 0.994 1.137 2009-Apr-10 20:35:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.101 0.955 0.124 2009-Apr-10 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:36:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.069 1.016 1.028 2009-Apr-10 20:36:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.920 1.025 1.063 2009-Apr-10 20:36:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.104 0.991 1.131 2009-Apr-10 20:36:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.101 0.955 0.124 2009-Apr-10 20:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2009-Apr-10 20:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:37:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:37:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.071 1.015 1.028 2009-Apr-10 20:37:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.920 1.028 1.068 2009-Apr-10 20:37:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.110 1.005 1.147 2009-Apr-10 20:37:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.101 0.957 0.124 2009-Apr-10 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2009-Apr-10 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:38:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:38:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:38:02 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-10 20:38:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:38:02 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-10 20:38:02 LOG1 fixed_driftmap: New position: year = 2009.2761389332522 RA = 09:27:56.9 RA/Dec = 09:28:30.5 +23:41:02.6 2009-Apr-10 20:38:02 NOTE fixed_driftmap: Correcting ZA to 5:19:48.9 ... 2009-Apr-10 20:38:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.3302446925 -CF 2009-Apr-10 20:38:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-10 20:38:02 START begin_task: Starting task 'WAPP calibration' 2009-Apr-10 20:38:02 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-10 20:38:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-10 20:38:02 START begin_task: Starting task 'selecting calibration type' 2009-Apr-10 20:38:02 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-10 20:38:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-10 20:38:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-10 20:38:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:38:02 START begin_task: Starting task 'waiting on setcal' 2009-Apr-10 20:38:02 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-10 20:38:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.3302446925 -CF 2009-Apr-10 20:38:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:38:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-10 20:38:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:38:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:38:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:38:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-10 20:38:03 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-10 20:38:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:38:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-10 20:38:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:38:03 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:38:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:38:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:38:03 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:38:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-10 20:38:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:38:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:38:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:38:03 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:38:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:38:03 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:38:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:38:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-10 20:38:03 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-10 20:38:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-10 20:38:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-10 20:38:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:38:03 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:38:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-10 20:38:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:38:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:38:03 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-10 20:38:03 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:38:03 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-10 20:38:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-10 20:38:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:38:03 INFO2 take_data: Starting WAPP 1-second scan: 910000175 2009-Apr-10 20:38:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:38:04 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-10 20:38:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:38:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-10 20:38:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2285.00 2009-Apr-10 20:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:38:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:38:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:38:06 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-10 20:38:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:38:06 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-10 20:38:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-10 20:38:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:38:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:38:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:38:06 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-10 20:38:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:38:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:38:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:38:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:38:06 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-10 20:38:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-10 20:38:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-10 20:38:06 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-10 20:38:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-10 20:38:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:38:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-10 20:38:06 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-10 20:38:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-10 20:38:07 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-10 20:38:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:38:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:38:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:38:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:38:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-10 20:38:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-10 20:38:07 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:38:07 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-10 20:38:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-10 20:38:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:38:07 INFO2 take_data: Starting WAPP 600-second scan: 910000176 2009-Apr-10 20:38:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:38:07 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-10 20:38:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:38:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.560 (still bad) 2009-Apr-10 20:38:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-10 20:38:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2288.00 2009-Apr-10 20:38:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20090410.a2010.0020.fits 2009-Apr-10 20:38:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090410.a2010.0020.fits} 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.560 (still bad) 2009-Apr-10 20:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:38:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:38:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.072 1.019 1.029 2009-Apr-10 20:38:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.922 1.030 1.070 2009-Apr-10 20:38:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 1.109 0.995 1.137 2009-Apr-10 20:38:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.101 0.956 0.124 2009-Apr-10 20:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2009-Apr-10 20:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2009-Apr-10 20:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:39:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:39:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.082 1.026 1.033 2009-Apr-10 20:39:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 0.927 1.032 1.076 2009-Apr-10 20:39:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.113 0.998 1.141 2009-Apr-10 20:39:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.101 0.961 0.124 2009-Apr-10 20:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.153 (still bad) 2009-Apr-10 20:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.170 (still bad) 2009-Apr-10 20:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.179 (still bad) 2009-Apr-10 20:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.181 (still bad) 2009-Apr-10 20:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.168 (still bad) 2009-Apr-10 20:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.151 (still bad) 2009-Apr-10 20:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:40:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:40:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 1.106 1.019 1.032 2009-Apr-10 20:40:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 0.922 1.026 1.072 2009-Apr-10 20:40:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.035 1.112 0.997 1.138 2009-Apr-10 20:40:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.101 0.955 0.124 2009-Apr-10 20:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.149 (still bad) 2009-Apr-10 20:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.157 (still bad) 2009-Apr-10 20:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.171 (still bad) 2009-Apr-10 20:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.185 (still bad) 2009-Apr-10 20:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.192 (still bad) 2009-Apr-10 20:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.195 (still bad) 2009-Apr-10 20:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.193 (still bad) 2009-Apr-10 20:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.179 (still bad) 2009-Apr-10 20:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.168 (still bad) 2009-Apr-10 20:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.152 (still bad) 2009-Apr-10 20:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2009-Apr-10 20:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2009-Apr-10 20:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2009-Apr-10 20:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.149 (still bad) 2009-Apr-10 20:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.150 (still bad) 2009-Apr-10 20:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2009-Apr-10 20:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2009-Apr-10 20:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:41:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:41:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.075 1.019 1.030 2009-Apr-10 20:41:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.921 1.029 1.071 2009-Apr-10 20:41:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.105 0.993 1.136 2009-Apr-10 20:41:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.101 0.958 0.124 2009-Apr-10 20:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2009-Apr-10 20:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.167 (still bad) 2009-Apr-10 20:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.185 (still bad) 2009-Apr-10 20:42:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:42:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.078 1.019 1.030 2009-Apr-10 20:42:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 0.921 1.031 1.076 2009-Apr-10 20:42:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 1.196 0.997 1.140 2009-Apr-10 20:42:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.101 0.955 0.125 2009-Apr-10 20:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.209 (still bad) 2009-Apr-10 20:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.204 (still bad) 2009-Apr-10 20:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.195 (still bad) 2009-Apr-10 20:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.183 (still bad) 2009-Apr-10 20:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.157 (still bad) 2009-Apr-10 20:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2009-Apr-10 20:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.152 (still bad) 2009-Apr-10 20:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.149 (still bad) 2009-Apr-10 20:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.151 (still bad) 2009-Apr-10 20:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.151 (still bad) 2009-Apr-10 20:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.152 (still bad) 2009-Apr-10 20:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.156 (still bad) 2009-Apr-10 20:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.148 (still bad) 2009-Apr-10 20:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2009-Apr-10 20:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2009-Apr-10 20:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.148 (still bad) 2009-Apr-10 20:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:43:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:43:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.079 1.023 1.032 2009-Apr-10 20:43:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 0.924 1.029 1.076 2009-Apr-10 20:43:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.036 1.105 1.000 1.140 2009-Apr-10 20:43:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.101 0.958 0.125 2009-Apr-10 20:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2009-Apr-10 20:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:44:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:44:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.078 1.022 1.032 2009-Apr-10 20:44:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 0.923 1.030 1.075 2009-Apr-10 20:44:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.106 0.999 1.138 2009-Apr-10 20:44:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.101 0.971 0.125 2009-Apr-10 20:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:45:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:45:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.075 1.021 1.030 2009-Apr-10 20:45:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.921 1.032 1.075 2009-Apr-10 20:45:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 1.111 1.001 1.139 2009-Apr-10 20:45:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.101 0.958 0.125 2009-Apr-10 20:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2009-Apr-10 20:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:46:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:46:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.980 1.090 1.022 1.032 2009-Apr-10 20:46:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 0.919 1.029 1.074 2009-Apr-10 20:46:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.108 0.997 1.139 2009-Apr-10 20:46:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.101 0.960 0.125 2009-Apr-10 20:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2009-Apr-10 20:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2009-Apr-10 20:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:47:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.976 1.084 1.045 1.054 2009-Apr-10 20:47:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 0.926 1.034 1.080 2009-Apr-10 20:47:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.123 1.000 1.140 2009-Apr-10 20:47:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.101 0.963 0.125 2009-Apr-10 20:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2009-Apr-10 20:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:48:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:48:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:48:08 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-10 20:48:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:48:08 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-10 20:48:08 LOG1 fixed_driftmap: New position: year = 2009.2761581362333 RA = 09:38:04.7 RA/Dec = 09:38:38.1 +23:40:57.2 2009-Apr-10 20:48:08 NOTE fixed_driftmap: Correcting ZA to 5:19:43.5 ... 2009-Apr-10 20:48:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.3287390248 -CF 2009-Apr-10 20:48:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-10 20:48:08 START begin_task: Starting task 'WAPP calibration' 2009-Apr-10 20:48:08 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-10 20:48:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-10 20:48:08 START begin_task: Starting task 'selecting calibration type' 2009-Apr-10 20:48:08 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-10 20:48:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-10 20:48:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-10 20:48:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:48:08 START begin_task: Starting task 'waiting on setcal' 2009-Apr-10 20:48:08 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-10 20:48:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.3287390248 -CF 2009-Apr-10 20:48:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:48:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-10 20:48:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:48:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:48:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:48:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-10 20:48:08 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-10 20:48:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-10 20:48:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:48:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-10 20:48:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:48:08 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:48:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:48:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:48:09 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:48:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-10 20:48:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:48:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:48:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:48:09 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:48:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:48:09 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:48:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:48:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-10 20:48:09 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-10 20:48:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-10 20:48:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-10 20:48:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:48:09 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:48:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-10 20:48:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:48:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:48:09 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-10 20:48:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:48:09 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-10 20:48:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:48:09 INFO2 take_data: Starting WAPP 1-second scan: 910000177 2009-Apr-10 20:48:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:48:09 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-10 20:48:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:48:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-10 20:48:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2890.00 2009-Apr-10 20:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:48:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:48:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:48:11 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-10 20:48:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:48:11 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-10 20:48:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-10 20:48:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:48:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:48:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:48:11 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-10 20:48:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:48:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:48:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:48:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:48:11 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-10 20:48:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-10 20:48:11 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-10 20:48:11 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-10 20:48:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-10 20:48:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:48:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-10 20:48:11 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-10 20:48:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-10 20:48:11 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-10 20:48:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:48:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:48:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:48:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:48:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-10 20:48:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-10 20:48:12 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:48:12 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-10 20:48:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-10 20:48:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:48:12 INFO2 take_data: Starting WAPP 600-second scan: 910000178 2009-Apr-10 20:48:12 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:48:12 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-10 20:48:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:48:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:48:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-10 20:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.561 (still bad) 2009-Apr-10 20:48:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2893.00 2009-Apr-10 20:48:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20090410.a2010.0021.fits 2009-Apr-10 20:48:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090410.a2010.0021.fits} 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:48:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:48:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.077 1.023 1.032 2009-Apr-10 20:48:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.922 1.031 1.074 2009-Apr-10 20:48:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.112 1.001 1.138 2009-Apr-10 20:48:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.101 0.959 0.124 2009-Apr-10 20:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2009-Apr-10 20:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:49:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:49:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.077 1.025 1.035 2009-Apr-10 20:49:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 0.924 1.029 1.072 2009-Apr-10 20:49:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 1.115 0.996 1.136 2009-Apr-10 20:49:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.101 0.958 0.125 2009-Apr-10 20:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.148 (still bad) 2009-Apr-10 20:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:50:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:50:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.078 1.021 1.030 2009-Apr-10 20:50:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 0.920 1.032 1.076 2009-Apr-10 20:50:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.110 0.997 1.138 2009-Apr-10 20:50:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.101 0.961 0.125 2009-Apr-10 20:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:51:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:51:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.080 1.022 1.032 2009-Apr-10 20:51:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.923 1.029 1.078 2009-Apr-10 20:51:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.108 1.002 1.141 2009-Apr-10 20:51:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.101 0.960 0.125 2009-Apr-10 20:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2009-Apr-10 20:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:52:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:52:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.078 1.021 1.030 2009-Apr-10 20:52:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.918 1.029 1.075 2009-Apr-10 20:52:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 1.107 0.998 1.138 2009-Apr-10 20:52:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.101 0.964 0.125 2009-Apr-10 20:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2009-Apr-10 20:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2009-Apr-10 20:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2009-Apr-10 20:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:53:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:53:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.079 1.024 1.031 2009-Apr-10 20:53:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 0.919 1.031 1.074 2009-Apr-10 20:53:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.035 1.108 1.000 1.137 2009-Apr-10 20:53:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.101 0.959 0.125 2009-Apr-10 20:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2009-Apr-10 20:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-10 20:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2009-Apr-10 20:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Apr-10 20:54:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.079 1.024 1.031 2009-Apr-10 20:54:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.921 1.030 1.074 2009-Apr-10 20:54:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.036 1.108 0.999 1.138 2009-Apr-10 20:54:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.101 0.960 0.125 2009-Apr-10 20:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-10 20:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2009-Apr-10 20:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2009-Apr-10 20:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-10 20:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.136 (still bad) 2009-Apr-10 20:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.136 (still bad) 2009-Apr-10 20:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2009-Apr-10 20:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2009-Apr-10 20:55:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 20:55:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.087 1.031 1.038 2009-Apr-10 20:55:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 0.929 1.041 1.084 2009-Apr-10 20:55:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 1.118 1.004 1.145 2009-Apr-10 20:55:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.102 0.967 0.125 2009-Apr-10 20:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.136 (still bad) 2009-Apr-10 20:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.136 (still bad) 2009-Apr-10 20:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.138 (still bad) 2009-Apr-10 20:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.136 (still bad) 2009-Apr-10 20:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-10 20:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.140 (still bad) 2009-Apr-10 20:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.137 (still bad) 2009-Apr-10 20:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.138 (still bad) 2009-Apr-10 20:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-10 20:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.139 (still bad) 2009-Apr-10 20:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:56:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 20:56:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 1.101 1.031 1.038 2009-Apr-10 20:56:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 0.928 1.040 1.083 2009-Apr-10 20:56:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.045 1.121 1.005 1.146 2009-Apr-10 20:56:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.102 0.965 0.125 2009-Apr-10 20:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-10 20:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.142 (still bad) 2009-Apr-10 20:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 20:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 20:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 20:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 20:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 20:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-10 20:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-10 20:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:57:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 20:57:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.081 1.024 1.035 2009-Apr-10 20:57:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 0.923 1.035 1.083 2009-Apr-10 20:57:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.119 1.004 1.147 2009-Apr-10 20:57:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.102 0.964 0.125 2009-Apr-10 20:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 20:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 20:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:58:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:58:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:58:13 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-10 20:58:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:58:13 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-10 20:58:13 LOG1 fixed_driftmap: New position: year = 2009.2761773075265 RA = 09:48:11.5 RA/Dec = 09:48:44.8 +23:40:52.0 2009-Apr-10 20:58:13 NOTE fixed_driftmap: Correcting ZA to 5:19:38.3 ... 2009-Apr-10 20:58:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.3273147974 -CF 2009-Apr-10 20:58:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-10 20:58:13 START begin_task: Starting task 'WAPP calibration' 2009-Apr-10 20:58:13 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-10 20:58:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-10 20:58:13 START begin_task: Starting task 'selecting calibration type' 2009-Apr-10 20:58:13 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-10 20:58:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-10 20:58:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-10 20:58:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:58:13 START begin_task: Starting task 'waiting on setcal' 2009-Apr-10 20:58:13 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-10 20:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:58:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.3273147974 -CF 2009-Apr-10 20:58:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:58:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-10 20:58:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 20:58:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:58:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 20:58:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-10 20:58:13 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-10 20:58:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-10 20:58:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:58:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-10 20:58:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:58:13 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-10 20:58:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 20:58:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:58:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:58:14 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:58:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-10 20:58:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 20:58:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:58:14 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 20:58:14 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 20:58:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 20:58:14 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 20:58:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 20:58:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-10 20:58:14 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-10 20:58:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-10 20:58:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-10 20:58:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:58:14 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:58:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-10 20:58:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:58:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:58:14 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-10 20:58:14 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:58:14 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-10 20:58:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:58:14 INFO2 take_data: Starting WAPP 1-second scan: 910000179 2009-Apr-10 20:58:14 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:58:14 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-10 20:58:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:58:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-10 20:58:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3495.00 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:58:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:58:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 20:58:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 20:58:16 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-10 20:58:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 20:58:16 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-10 20:58:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-10 20:58:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 20:58:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 20:58:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 20:58:16 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-10 20:58:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 20:58:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 20:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.578 (still bad) 2009-Apr-10 20:58:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 20:58:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 20:58:16 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-10 20:58:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-10 20:58:16 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-10 20:58:16 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-10 20:58:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-10 20:58:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 20:58:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-10 20:58:16 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-10 20:58:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Apr-10 20:58:16 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Apr-10 20:58:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 20:58:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 20:58:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 20:58:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 20:58:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-10 20:58:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-10 20:58:17 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 20:58:17 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-10 20:58:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-10 20:58:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 20:58:17 INFO2 take_data: Starting WAPP 600-second scan: 910000180 2009-Apr-10 20:58:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 20:58:17 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-10 20:58:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Apr-10 20:58:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 20:58:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-10 20:58:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3498.00 2009-Apr-10 20:58:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20090410.a2010.0022.fits 2009-Apr-10 20:58:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090410.a2010.0022.fits} 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 20:58:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 20:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 20:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:58:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 20:58:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 1.085 1.038 1.052 2009-Apr-10 20:58:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 0.924 1.035 1.086 2009-Apr-10 20:58:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 1.122 1.005 1.148 2009-Apr-10 20:58:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.102 0.963 0.126 2009-Apr-10 20:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.153 (still bad) 2009-Apr-10 20:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 20:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 20:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-10 20:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-10 20:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-10 20:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.153 (still bad) 2009-Apr-10 20:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.153 (still bad) 2009-Apr-10 20:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 20:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 20:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 20:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 20:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 20:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 20:59:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 20:59:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.079 1.023 1.035 2009-Apr-10 20:59:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 0.924 1.037 1.086 2009-Apr-10 20:59:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.120 1.000 1.147 2009-Apr-10 20:59:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.102 0.960 0.126 2009-Apr-10 20:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2009-Apr-10 21:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.155 (still bad) 2009-Apr-10 21:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 21:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.154 (still bad) 2009-Apr-10 21:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2009-Apr-10 21:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2009-Apr-10 21:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 21:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-10 21:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 21:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2009-Apr-10 21:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2009-Apr-10 21:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.153 (still bad) 2009-Apr-10 21:00:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 21:00:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.079 1.027 1.038 2009-Apr-10 21:00:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 0.928 1.036 1.086 2009-Apr-10 21:00:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.045 1.121 1.005 1.156 2009-Apr-10 21:00:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.102 0.961 0.126 2009-Apr-10 21:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2009-Apr-10 21:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2009-Apr-10 21:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.156 (still bad) 2009-Apr-10 21:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 21:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2009-Apr-10 21:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2009-Apr-10 21:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.155 (still bad) 2009-Apr-10 21:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-10 21:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:01:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-10 21:01:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.079 1.026 1.037 2009-Apr-10 21:01:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 0.923 1.037 1.087 2009-Apr-10 21:01:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.123 1.004 1.150 2009-Apr-10 21:01:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.103 0.961 0.126 2009-Apr-10 21:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-10 21:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.151 (still bad) 2009-Apr-10 21:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-10 21:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-10 21:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.151 (still bad) 2009-Apr-10 21:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-10 21:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.151 (still bad) 2009-Apr-10 21:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-10 21:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-10 21:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.158 (still bad) 2009-Apr-10 21:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 21:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-10 21:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.152 (still bad) 2009-Apr-10 21:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.157 (still bad) 2009-Apr-10 21:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.151 (still bad) 2009-Apr-10 21:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.153 (still bad) 2009-Apr-10 21:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-10 21:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.151 (still bad) 2009-Apr-10 21:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.156 (still bad) 2009-Apr-10 21:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-10 21:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-10 21:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:03:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-10 21:03:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.081 1.040 1.051 2009-Apr-10 21:03:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 0.924 1.036 1.085 2009-Apr-10 21:03:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 1.117 1.003 1.147 2009-Apr-10 21:03:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.103 0.961 0.126 2009-Apr-10 21:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.155 (still bad) 2009-Apr-10 21:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-10 21:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-10 21:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.156 (still bad) 2009-Apr-10 21:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-10 21:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.151 (still bad) 2009-Apr-10 21:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-10 21:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.156 (still bad) 2009-Apr-10 21:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.156 (still bad) 2009-Apr-10 21:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.159 (still bad) 2009-Apr-10 21:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.157 (still bad) 2009-Apr-10 21:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.162 (still bad) 2009-Apr-10 21:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.167 (still bad) 2009-Apr-10 21:04:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-10 21:04:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.083 1.029 1.042 2009-Apr-10 21:04:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 0.921 1.033 1.085 2009-Apr-10 21:04:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.114 1.022 1.168 2009-Apr-10 21:04:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.103 0.962 0.126 2009-Apr-10 21:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.172 (still bad) 2009-Apr-10 21:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.170 (still bad) 2009-Apr-10 21:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.165 (still bad) 2009-Apr-10 21:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.163 (still bad) 2009-Apr-10 21:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.156 (still bad) 2009-Apr-10 21:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.155 (still bad) 2009-Apr-10 21:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.153 (still bad) 2009-Apr-10 21:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:05:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 21:05:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.085 1.026 1.039 2009-Apr-10 21:05:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 0.921 1.035 1.084 2009-Apr-10 21:05:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 1.117 1.004 1.149 2009-Apr-10 21:05:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.102 0.965 0.126 2009-Apr-10 21:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.154 (still bad) 2009-Apr-10 21:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:06:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 21:06:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.092 1.042 1.051 2009-Apr-10 21:06:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 0.926 1.043 1.091 2009-Apr-10 21:06:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 1.120 1.011 1.153 2009-Apr-10 21:06:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.102 0.973 0.126 2009-Apr-10 21:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.150 (still bad) 2009-Apr-10 21:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:07:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 21:07:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.085 1.027 1.038 2009-Apr-10 21:07:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 0.920 1.036 1.085 2009-Apr-10 21:07:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 1.121 1.007 1.147 2009-Apr-10 21:07:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.102 0.967 0.126 2009-Apr-10 21:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 21:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.149 (still bad) 2009-Apr-10 21:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.152 (still bad) 2009-Apr-10 21:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.147 (still bad) 2009-Apr-10 21:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-10 21:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.148 (still bad) 2009-Apr-10 21:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.144 (still bad) 2009-Apr-10 21:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.142 (still bad) 2009-Apr-10 21:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-10 21:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.146 (still bad) 2009-Apr-10 21:08:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-10 21:08:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.088 1.027 1.039 2009-Apr-10 21:08:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 0.923 1.045 1.092 2009-Apr-10 21:08:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.116 1.005 1.145 2009-Apr-10 21:08:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.102 0.967 0.126 2009-Apr-10 21:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.142 (still bad) 2009-Apr-10 21:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.143 (still bad) 2009-Apr-10 21:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.145 (still bad) 2009-Apr-10 21:08:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 21:08:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 21:08:18 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-10 21:08:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 21:08:18 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-10 21:08:18 LOG1 fixed_driftmap: New position: year = 2009.2761964788197 RA = 09:58:18.3 RA/Dec = 09:58:51.5 +23:40:47.2 2009-Apr-10 21:08:18 NOTE fixed_driftmap: Correcting ZA to 5:19:33.5 ... 2009-Apr-10 21:08:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.3259722333 -CF 2009-Apr-10 21:08:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-10 21:08:18 START begin_task: Starting task 'WAPP calibration' 2009-Apr-10 21:08:18 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-10 21:08:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-10 21:08:18 START begin_task: Starting task 'selecting calibration type' 2009-Apr-10 21:08:18 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-10 21:08:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-10 21:08:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-10 21:08:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 21:08:18 START begin_task: Starting task 'waiting on setcal' 2009-Apr-10 21:08:18 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-10 21:08:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.3259722333 -CF 2009-Apr-10 21:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.151 (still bad) 2009-Apr-10 21:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 21:08:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-10 21:08:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-10 21:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 21:08:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-10 21:08:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-10 21:08:18 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-10 21:08:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-10 21:08:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 21:08:18 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-10 21:08:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 21:08:18 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-10 21:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-10 21:08:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 21:08:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 21:08:19 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 21:08:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-10 21:08:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-10 21:08:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-10 21:08:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-10 21:08:19 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-10 21:08:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-10 21:08:19 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-10 21:08:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-10 21:08:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-10 21:08:19 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-10 21:08:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-10 21:08:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-10 21:08:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 21:08:19 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 21:08:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-10 21:08:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 21:08:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 21:08:19 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-10 21:08:19 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 21:08:19 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-10 21:08:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-10 21:08:19 INFO2 take_data: Starting WAPP 1-second scan: 910000181 2009-Apr-10 21:08:19 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-10 21:08:19 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-10 21:08:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-10 21:08:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-10 21:08:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4100.00 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771967 MHz 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614063 MHz 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657337 MHz 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1170.000000 MHz 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 970.000000 MHz 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1066.000000 MHz 2009-Apr-10 21:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2009-Apr-10 21:08:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-10 21:08:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-10 21:08:21 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-10 21:08:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-10 21:08:21 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-10 21:08:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-10 21:08:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-10 21:08:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-10 21:08:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-10 21:08:21 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-10 21:08:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-10 21:08:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-10 21:08:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-10 21:08:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-10 21:08:21 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-10 21:08:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-10 21:08:21 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-10 21:08:21 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-10 21:08:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-10 21:08:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-10 21:08:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-10 21:08:21 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-10 21:08:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2009-Apr-10 21:08:21 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2009-Apr-10 21:08:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Apr-10 21:08:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Apr-10 21:08:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Apr-10 21:08:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Apr-10 21:08:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-10 21:08:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-10 21:08:22 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-10 21:08:22 LOG5 begin_task: L