2009-Apr-08 20:17:55 BEGIN executive: CIMA executive starting ... 2009-Apr-08 20:17:55 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-08 20:17:56 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-08 20:17:56 INFO4 executive: This is an ON-LINE session 2009-Apr-08 20:17:56 INFO4 executive: This is a REMOTE session 2009-Apr-08 20:17:56 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-08 20:17:56 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Manolis Papastergis' 2009-Apr-08 20:17:56 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090408' 2009-Apr-08 20:17:56 LOG2 log_preferences: Currently applied preferences: 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-08 20:17:56 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-08 20:17:56 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-08 20:17:56 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-08 20:17:56 ALERT executive: CIMA executive ready 2009-Apr-08 20:18:00 NOTE frontend: CIMA frontend ready 2009-Apr-08 20:18:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:18:00 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-08 20:18:07 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-08 20:18:07 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:18:22 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-08 20:18:22 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-08 20:18:22 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-08 20:18:22 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-08 20:18:22 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-08 20:18:22 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-08 20:18:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-08 20:18:22 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-08 20:18:22 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-08 20:18:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-08 20:18:22 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-08 20:18:22 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-08 20:18:22 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-08 20:18:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:18:22 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-08 20:18:22 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-08 20:18:22 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-08 20:18:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-08 20:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:18:35 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-08 20:18:35 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-08 20:18:35 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-08 20:18:35 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-08 20:18:35 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-08 20:18:35 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-08 20:18:35 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-08 20:18:35 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-08 20:18:35 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-08 20:18:35 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-08 20:18:38 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-08 20:18:38 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-08 20:18:38 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-08 20:18:38 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-08 20:19:32 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-08 20:19:38 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-08 20:19:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-08 20:19:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-08 20:19:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-08 20:19:39 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-08 20:19:39 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-08 20:19:39 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-08 20:19:39 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-08 20:19:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-08 20:19:39 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-08 20:19:39 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-08 20:19:39 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-08 20:19:39 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-08 20:19:39 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-08 20:19:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-08 20:19:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-08 20:19:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-08 20:19:41 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-08 20:19:41 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-08 20:19:41 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-08 20:19:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-08 20:19:41 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-08 20:19:41 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-08 20:19:41 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-08 20:19:41 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-08 20:19:41 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-08 20:19:41 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-08 20:19:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-08 20:19:41 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-08 20:19:41 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-08 20:19:41 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-08 20:19:41 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-08 20:19:41 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-08 20:19:41 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-08 20:19:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:19:41 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-08 20:19:41 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-08 20:19:41 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-08 20:19:41 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-08 20:19:41 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-08 20:19:41 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-08 20:19:41 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-08 20:19:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-08 20:19:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:19:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:19:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:19:41 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-08 20:19:41 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-08 20:19:41 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-08 20:19:42 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:19:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:19:42 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-08 20:19:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:19:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-08 20:19:42 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-08 20:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-08 20:19:43 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-08 20:19:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-08 20:19:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:19:43 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-08 20:19:43 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-08 20:19:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:19:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:57 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:19:57 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-08 20:19:57 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-08 20:19:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-08 20:19:57 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-08 20:19:57 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-08 20:19:57 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-08 20:19:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:19:58 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-08 20:19:58 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-08 20:19:58 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-08 20:19:58 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-08 20:19:58 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-08 20:19:58 START begin_task: Starting task 'selecting calibration port' 2009-Apr-08 20:19:58 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-08 20:19:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-08 20:19:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:19:58 START begin_task: Starting task 'waiting on calport' 2009-Apr-08 20:19:58 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:58 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-08 20:19:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:58 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:19:58 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-08 20:19:58 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-08 20:19:58 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-08 20:19:58 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:19:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:19:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:19:58 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:19:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:19:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:19:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:19:58 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:58 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-08 20:19:58 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-08 20:19:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:19:58 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-08 20:19:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:19:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:19:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:19:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:19:59 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:19:59 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-08 20:19:59 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-08 20:19:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:19:59 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-08 20:19:59 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-08 20:19:59 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-08 20:19:59 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-08 20:19:59 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-08 20:19:59 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-08 20:19:59 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-08 20:19:59 LOG3 track_source: Calling 'track_source galfasrc 090300.0 +201148 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-08 20:19:59 START begin_task: Starting task 'sending tracking commands' 2009-Apr-08 20:19:59 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-08 20:19:59 INFO1 track_source: Starting to track galfasrc 2009-Apr-08 20:19:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-08 20:19:59 LOG3 vw_send: To DATATAKING: set ra 090300.0 2009-Apr-08 20:19:59 LOG3 vw_send: To DATATAKING: set dec +201148 2009-Apr-08 20:19:59 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-08 20:19:59 LOG3 vw_send: To DATATAKING: pnt tr 090300.0 +201148 -CJ 2009-Apr-08 20:19:59 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:19:59 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-08 20:19:59 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-08 20:19:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:19:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-08 20:19:59 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-08 20:19:59 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-08 20:19:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:19:59 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-08 20:19:59 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-08 20:19:59 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-08 20:19:59 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-08 20:19:59 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:20:00 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-08 20:20:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-08 20:20:00 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-08 20:20:00 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-08 20:20:00 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-08 20:20:00 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-08 20:20:00 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-08 20:20:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:20:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20090408.a2010.0018.fits 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-08 20:20:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-08 20:20:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-08 20:20:00 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090408.a2010.0018.fits} 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: set ra 090300.0 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: set dec +201148 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: vw% 090300.0 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: vw% +201148 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: pnt tr 090300.0 +201148 -CJ 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-08 20:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:20:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-08 20:20:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-08 20:20:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-08 20:20:34 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-08 20:20:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-08 20:20:34 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:20:34 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-08 20:20:34 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-08 20:20:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:20:34 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-08 20:20:34 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-08 20:20:34 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-08 20:20:34 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-08 20:20:34 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-08 20:20:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-08 20:20:35 LOG3 waittrk: Start waittrk 5 2009-Apr-08 20:20:35 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-08 20:20:35 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-08 20:20:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-08 20:20:40 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-08 20:20:40 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-08 20:20:40 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-08 20:20:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-08 20:20:40 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-08 20:20:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-08 20:20:40 INFO2 waittrk: Now tracking galfasrc 2009-Apr-08 20:20:40 LOG4 waittrk: Current telescope position: Az = 182.57 ZA = 1.82 2009-Apr-08 20:20:40 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-08 20:20:40 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-08 20:20:40 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-08 20:20:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:20:40 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-08 20:20:40 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-08 20:20:40 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-08 20:20:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-08 20:20:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-08 20:20:40 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-08 20:20:40 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-08 20:20:41 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-08 20:20:41 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-08 20:20:41 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-08 20:20:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-08 20:20:41 START begin_task: Starting task 'selecting calibration type' 2009-Apr-08 20:20:41 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-08 20:20:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-08 20:20:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-08 20:20:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:20:41 START begin_task: Starting task 'waiting on setcal' 2009-Apr-08 20:20:41 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-08 20:20:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-08 20:20:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:20:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:41 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:20:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-08 20:20:41 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-08 20:20:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-08 20:20:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:20:41 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-08 20:20:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:20:41 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-08 20:20:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:42 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:20:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:20:42 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:20:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-08 20:20:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:20:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:20:42 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:20:42 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:20:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:20:42 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:20:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:20:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-08 20:20:42 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:20:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:20:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:20:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:20:42 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090408.a2010.0018.fits' is empty! 2009-Apr-08 20:20:42 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-08 20:20:42 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-08 20:20:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-08 20:20:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:20:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:20:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:20:42 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:20:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:20:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:20:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:20:42 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-08 20:20:42 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:20:42 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-08 20:20:42 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-08 20:20:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-08 20:20:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-08 20:20:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:20:42 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-08 20:20:42 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-08 20:20:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-08 20:20:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:20:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:20:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-08 20:20:45 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-08 20:20:46 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:20:46 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-08 20:20:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:20:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:20:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:20:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:20:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-08 20:20:46 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-08 20:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-08 20:20:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 4 dB 2009-Apr-08 20:20:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-08 20:20:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-08 20:20:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-08 20:20:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-08 20:20:46 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.995 1.089 ALFA beam 1: 1.020 1.008 2009-Apr-08 20:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.971 0.934 ALFA beam 3: 1.029 1.027 2009-Apr-08 20:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.024 1.104 ALFA beam 5: 1.008 0.953 2009-Apr-08 20:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.066 0.100 ALFA beam 7: 0.956 0.124 2009-Apr-08 20:20:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:20:46 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-08 20:20:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:20:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:20:46 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-08 20:20:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:20:46 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-08 20:20:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:20:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:20:46 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-08 20:20:46 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-08 20:20:46 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:20:46 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-08 20:20:46 LOG5 antvel: Calling 'antvel 90300.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:20:46 LOG2 antvel: Precessing RA = 09:03:00.0 Dec = +20:11:48.0 Epoch = 2009.27063 J 2009-Apr-08 20:20:46 LOG2 antvel: Computed apparent RA = 09:03:33.2 Dec = +20:09:33.8 2009-Apr-08 20:20:46 LOG2 antvel: Parameters to Doppler: Topocentric 87646 2009 98 0.0 2009-Apr-08 20:20:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:20:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-08 20:20:46 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-08 20:20:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:20:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:20:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:20:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:20:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-08 20:20:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:20:47 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-08 20:20:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:20:47 LOG5 log_alfabeam: Parameters: 9.0500000000000007 20.196666666666665 9.054927 2009.2706304028188 18.999933 2009-Apr-08 20:20:47 LOG4 log_alfabeam: ALFABEAM 0 9.049999999999585 20.196666666666662 2009-Apr-08 20:20:47 LOG4 log_alfabeam: ALFABEAM 1 9.050943720174546 20.091434732516266 2009-Apr-08 20:20:47 LOG4 log_alfabeam: ALFABEAM 2 9.055936799033944 20.157376763863752 2009-Apr-08 20:20:47 LOG4 log_alfabeam: ALFABEAM 3 9.055234269164258 20.263092974835608 2009-Apr-08 20:20:47 LOG4 log_alfabeam: ALFABEAM 4 9.048911058196865 20.301789380802180 2009-Apr-08 20:20:47 LOG4 log_alfabeam: ALFABEAM 5 9.043815802479426 20.231878624475961 2009-Apr-08 20:20:47 LOG4 log_alfabeam: ALFABEAM 6 9.045143769369103 20.127416781664255 2009-Apr-08 20:20:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800264 2009-Apr-08 20:20:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:20:47 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-08 20:20:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:20:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:20:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:20:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1248.00 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:20:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-08 20:20:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.089 1.020 1.008 2009-Apr-08 20:20:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 0.934 1.029 1.027 2009-Apr-08 20:20:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.104 1.008 0.953 2009-Apr-08 20:20:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.956 0.124 2009-Apr-08 20:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-08 20:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-08 20:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-08 20:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-08 20:20:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:20:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:20:58 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-08 20:20:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:20:58 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-08 20:20:58 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-08 20:20:58 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:20:58 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-08 20:20:58 LOG5 antvel: Calling 'antvel 90300.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:20:58 LOG2 antvel: Precessing RA = 09:03:00.0 Dec = +20:11:48.0 Epoch = 2009.27063 J 2009-Apr-08 20:20:58 LOG2 antvel: Computed apparent RA = 09:03:33.2 Dec = +20:09:33.8 2009-Apr-08 20:20:58 LOG2 antvel: Parameters to Doppler: Topocentric 87658 2009 98 0.0 2009-Apr-08 20:20:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:20:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-08 20:20:58 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-08 20:20:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:20:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:20:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:20:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:20:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-08 20:20:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:20:58 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-08 20:20:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:20:58 LOG5 log_alfabeam: Parameters: 9.0500000000000007 20.196666666666665 9.058270 2009.2706307830758 18.999933 2009-Apr-08 20:20:58 LOG4 log_alfabeam: ALFABEAM 0 9.049999999995881 20.196666666666616 2009-Apr-08 20:20:58 LOG4 log_alfabeam: ALFABEAM 1 9.051140179211194 20.091821246171012 2009-Apr-08 20:20:58 LOG4 log_alfabeam: ALFABEAM 2 9.056008241462848 20.159591546897012 2009-Apr-08 20:20:58 LOG4 log_alfabeam: ALFABEAM 3 9.055108191714615 20.265010721202607 2009-Apr-08 20:20:58 LOG4 log_alfabeam: ALFABEAM 4 9.048714527122341 20.301348918828996 2009-Apr-08 20:20:58 LOG4 log_alfabeam: ALFABEAM 5 9.043752028016307 20.229571639693908 2009-Apr-08 20:20:58 LOG4 log_alfabeam: ALFABEAM 6 9.045275117000834 20.125639024825201 2009-Apr-08 20:20:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800265 2009-Apr-08 20:20:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:20:59 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-08 20:20:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:20:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:20:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-08 20:20:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:20:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1260.00 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-08 20:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-08 20:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-08 20:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-08 20:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-08 20:21:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:21:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:21:10 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-08 20:21:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:21:10 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-08 20:21:10 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-08 20:21:10 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:21:10 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-08 20:21:10 LOG5 antvel: Calling 'antvel 90300.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:21:10 LOG2 antvel: Precessing RA = 09:03:00.0 Dec = +20:11:48.0 Epoch = 2009.27063 J 2009-Apr-08 20:21:10 LOG2 antvel: Computed apparent RA = 09:03:33.2 Dec = +20:09:33.8 2009-Apr-08 20:21:10 LOG2 antvel: Parameters to Doppler: Topocentric 87670 2009 98 0.0 2009-Apr-08 20:21:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:21:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-08 20:21:10 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-08 20:21:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:21:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:21:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:21:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-08 20:21:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:21:10 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-08 20:21:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:21:10 LOG5 log_alfabeam: Parameters: 9.0500000000000007 20.196666666666665 9.061612 2009.2706311633331 18.999933 2009-Apr-08 20:21:10 LOG4 log_alfabeam: ALFABEAM 0 9.050000000000505 20.196666666666669 2009-Apr-08 20:21:10 LOG4 log_alfabeam: ALFABEAM 1 9.051335881449281 20.092280509123100 2009-Apr-08 20:21:10 LOG4 log_alfabeam: ALFABEAM 2 9.056075595244042 20.161833245285450 2009-Apr-08 20:21:10 LOG4 log_alfabeam: ALFABEAM 3 9.054978445907787 20.266881850390615 2009-Apr-08 20:21:10 LOG4 log_alfabeam: ALFABEAM 4 9.048518955839453 20.300835827919361 2009-Apr-08 20:21:10 LOG4 log_alfabeam: ALFABEAM 5 9.043692678017983 20.227243475093580 2009-Apr-08 20:21:10 LOG4 log_alfabeam: ALFABEAM 6 9.045409598319464 20.123911566694037 2009-Apr-08 20:21:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800266 2009-Apr-08 20:21:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:21:11 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-08 20:21:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:21:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:21:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:21:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1272.00 2009-Apr-08 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-08 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-08 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-08 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-08 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-08 20:21:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:21:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:21:22 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-08 20:21:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:21:22 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-08 20:21:22 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-08 20:21:22 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:21:22 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-08 20:21:22 LOG5 antvel: Calling 'antvel 90300.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:21:22 LOG2 antvel: Precessing RA = 09:03:00.0 Dec = +20:11:48.0 Epoch = 2009.27063 J 2009-Apr-08 20:21:22 LOG2 antvel: Computed apparent RA = 09:03:33.2 Dec = +20:09:33.8 2009-Apr-08 20:21:22 LOG2 antvel: Parameters to Doppler: Topocentric 87682 2009 98 0.0 2009-Apr-08 20:21:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:21:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-08 20:21:22 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-08 20:21:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:21:22 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:21:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:21:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-08 20:21:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:21:22 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-08 20:21:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:21:22 LOG5 log_alfabeam: Parameters: 9.0500000000000007 20.196666666666665 9.064955 2009.2706315435901 18.999933 2009-Apr-08 20:21:22 LOG4 log_alfabeam: ALFABEAM 0 9.050000000000269 20.196666666666665 2009-Apr-08 20:21:22 LOG4 log_alfabeam: ALFABEAM 1 9.051530542193911 20.092811804790639 2009-Apr-08 20:21:22 LOG4 log_alfabeam: ALFABEAM 2 9.056138759861827 20.164098642090565 2009-Apr-08 20:21:22 LOG4 log_alfabeam: ALFABEAM 3 9.054845220945227 20.268703550233546 2009-Apr-08 20:21:22 LOG4 log_alfabeam: ALFABEAM 4 9.048324628296905 20.300251013797176 2009-Apr-08 20:21:22 LOG4 log_alfabeam: ALFABEAM 5 9.043637824375036 20.224897643523757 2009-Apr-08 20:21:22 LOG4 log_alfabeam: ALFABEAM 6 9.045547008205260 20.122236709129879 2009-Apr-08 20:21:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800267 2009-Apr-08 20:21:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:21:23 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-08 20:21:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:21:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:21:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:21:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1284.00 2009-Apr-08 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-08 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-08 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-08 20:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-08 20:21:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:21:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:21:34 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-08 20:21:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:21:34 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-08 20:21:34 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-08 20:21:34 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:21:34 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-08 20:21:34 LOG5 antvel: Calling 'antvel 90300.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:21:34 LOG2 antvel: Precessing RA = 09:03:00.0 Dec = +20:11:48.0 Epoch = 2009.27063 J 2009-Apr-08 20:21:34 LOG2 antvel: Computed apparent RA = 09:03:33.2 Dec = +20:09:33.8 2009-Apr-08 20:21:34 LOG2 antvel: Parameters to Doppler: Topocentric 87694 2009 98 0.0 2009-Apr-08 20:21:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:21:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-08 20:21:34 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-08 20:21:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:21:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:21:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:21:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-08 20:21:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:21:34 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-08 20:21:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:21:34 LOG5 log_alfabeam: Parameters: 9.0500000000000007 20.196666666666665 9.068297 2009.2706319238471 18.999933 2009-Apr-08 20:21:34 LOG4 log_alfabeam: ALFABEAM 0 9.050000000000297 20.196666666666665 2009-Apr-08 20:21:34 LOG4 log_alfabeam: ALFABEAM 1 9.051723651274138 20.093413386853470 2009-Apr-08 20:21:34 LOG4 log_alfabeam: ALFABEAM 2 9.056197582712361 20.166381693948221 2009-Apr-08 20:21:34 LOG4 log_alfabeam: ALFABEAM 3 9.054708884002387 20.270471117032372 2009-Apr-08 20:21:34 LOG4 log_alfabeam: ALFABEAM 4 9.048132051999136 20.299596472382397 2009-Apr-08 20:21:34 LOG4 log_alfabeam: ALFABEAM 5 9.043587578979507 20.222540532762007 2009-Apr-08 20:21:34 LOG4 log_alfabeam: ALFABEAM 6 9.045686962860843 20.120618449039071 2009-Apr-08 20:21:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800268 2009-Apr-08 20:21:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:21:35 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-08 20:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-08 20:21:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:21:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:21:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:21:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1296.00 2009-Apr-08 20:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:21:37 LOG5 wapp_failed: Calling 'wapp_failed 3' 2009-Apr-08 20:21:37 ERROR wapp_failed: ERROR WAPP-3 failed to complete its current task! 2009-Apr-08 20:21:37 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 abort' 2009-Apr-08 20:21:37 START begin_task: Starting task 'handling WAPP failure' 2009-Apr-08 20:21:37 LOG5 begin_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-08 20:21:37 NOTE handle_wapp_failure: Will abort task 'running command file 'command_galfasrc09.cmd'' since the WAPP failure preference is set to 'abort'! 2009-Apr-08 20:21:37 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2009-Apr-08 20:21:37 LOG1 task_failed: Task 'handling WAPP failure' failed! 2009-Apr-08 20:21:37 LOG5 task_failed: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-08 20:21:37 WARNING abort_task: WARNING abort requested! 2009-Apr-08 20:21:37 WARNING abort_task: WARNING Aborting handling WAPP failure 2009-Apr-08 20:21:37 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2009-Apr-08 20:21:37 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2009-Apr-08 20:21:37 LOG5 end_task: Level: (5) ID = <10041> Status = 1 0 0 1 failed 2009-Apr-08 20:21:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'FAILED' 2009-Apr-08 20:21:37 LOG5 end_task: Level: (4) ID = <10040> Status = 1 0 0 1 failed 2009-Apr-08 20:21:37 LOG4 stop_backends: Calling 'stop_backends' 2009-Apr-08 20:21:37 START begin_task: Starting task 'stopping the WAPPs' 2009-Apr-08 20:21:37 LOG5 begin_task: Level: (4) ID = <10042> Status = 1 0 0 1 failed 2009-Apr-08 20:21:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Apr-08 20:21:37 INFO1 stop_wapp: Stopping the WAPPs 2009-Apr-08 20:21:37 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Apr-08 20:21:37 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Apr-08 20:21:37 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Apr-08 20:21:37 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Apr-08 20:21:37 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Apr-08 20:21:37 LOG5 begin_task: Level: (5) ID = <10043> Status = 1 0 0 1 failed 2009-Apr-08 20:21:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Apr-08 20:21:37 LOG3 WAPP=1+2+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:21:37 ERROR WAPP=3-read_timeout: ERROR time-out while waiting for data from the correlator! 2009-Apr-08 20:21:37 ERROR WAPP=3-start_spectra: ERROR failed to read spectral line data! 2009-Apr-08 20:21:38 PROBLEM WAPP=3-start_spectra: Reason: Connection timed out! 2009-Apr-08 20:21:38 ERROR WAPP=3-start_spectra: ERROR the correlator has failed to start! 2009-Apr-08 20:21:38 INFO1 WAPP=3-start_spectra: DONE with spectral line observation 2009-Apr-08 20:21:38 INFO1 WAPP=3-wappcon: Can't abort --- the WAPP isn't running 2009-Apr-08 20:21:39 NOTE WAPP=1+2+4-wappcon: WAPP successfully aborted! 2009-Apr-08 20:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2009-Apr-08 20:21:39 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2009-Apr-08 20:21:39 LOG5 end_task: Level: (5) ID = <10043> Status = 1 0 0 1 failed 2009-Apr-08 20:21:39 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2009-Apr-08 20:21:39 LOG5 end_task: Level: (4) ID = <10042> Status = 1 0 0 1 failed 2009-Apr-08 20:21:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'FAILED' 2009-Apr-08 20:21:39 LOG5 end_task: Level: (3) ID = <10039> Status = 1 0 0 1 failed 2009-Apr-08 20:21:39 INFO2 smartfreq: Switching off CAL 2009-Apr-08 20:21:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:21:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:21:39 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-08 20:21:39 LOG5 antvel: Calling 'antvel 90300.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:21:39 LOG2 antvel: Precessing RA = 09:03:00.0 Dec = +20:11:48.0 Epoch = 2009.27063 J 2009-Apr-08 20:21:39 LOG2 antvel: Computed apparent RA = 09:03:33.2 Dec = +20:09:33.8 2009-Apr-08 20:21:39 LOG2 antvel: Parameters to Doppler: Topocentric 87699 2009 98 0.0 2009-Apr-08 20:21:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:21:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-08 20:21:39 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-08 20:21:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:21:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:21:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:21:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:39 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-08 20:21:39 LOG5 finish_task: Level: (2) ID = <10021> Status = 1 0 0 1 failed 2009-Apr-08 20:21:39 ERROR finish_task: ERROR failed pattern: smart frequency switching 2009-Apr-08 20:21:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-08 20:21:39 END end_task: Finishing task 'smart frequency switching' with status 'FAILED' 2009-Apr-08 20:21:39 LOG5 end_task: Level: (2) ID = <10021> Status = 1 0 0 1 failed 2009-Apr-08 20:21:39 ALERT run_command_file: Stopping command file processing at line 13! 2009-Apr-08 20:21:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-08 20:21:39 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-08 20:21:39 LOG5 finish_task: Level: (1) ID = <10003> Status = 1 0 0 1 failed 2009-Apr-08 20:21:39 ERROR finish_task: ERROR failed running: command file 'command_galfasrc09.cmd' 2009-Apr-08 20:21:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-08 20:21:39 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'FAILED' 2009-Apr-08 20:21:39 LOG5 end_task: Level: (1) ID = <10003> Status = 1 0 0 1 failed 2009-Apr-08 20:21:39 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:21:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:21:39 LOG4 WAPP=1+2+4-start_spectra: Abort request received 2009-Apr-08 20:21:39 INFO1 WAPP=1+2+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:21:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:21:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:21:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:21:40 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 24 dumps! 2009-Apr-08 20:22:18 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-08 20:22:18 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-08 20:22:18 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-08 20:22:18 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-08 20:22:18 LOG5 begin_task: Level: (1) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-08 20:22:18 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-08 20:22:18 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-08 20:22:18 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-08 20:22:18 LOG5 end_task: Level: (1) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-08 20:22:18 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-08 20:22:18 LOG3 exec_msg: Closing socket 2009-Apr-08 20:22:18 LOG3 exec_msg: Closing socket 2009-Apr-08 20:22:18 LOG3 exec_msg: Closing socket 2009-Apr-08 20:22:18 LOG3 exec_msg: Closing socket 2009-Apr-08 20:22:21 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-08 20:22:21 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-08 20:22:21 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-08 20:22:21 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-08 20:22:54 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-08 20:23:01 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-08 20:23:02 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-08 20:23:02 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-08 20:23:02 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-08 20:23:02 LOG5 begin_task: Level: (1) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-08 20:23:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-08 20:23:02 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-08 20:23:02 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-08 20:23:02 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-08 20:23:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-08 20:23:02 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-08 20:23:02 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-08 20:23:02 LOG2 CIMA-antvel: Precessing RA = 09:03:00.0 Dec = +20:11:48.0 Epoch = 2009.27063 J 2009-Apr-08 20:23:02 LOG2 CIMA-antvel: Computed apparent RA = 09:03:33.2 Dec = +20:09:33.8 2009-Apr-08 20:23:02 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 87782 2009 98 0.0 2009-Apr-08 20:23:02 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-08 20:23:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-08 20:23:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-08 20:23:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-08 20:23:04 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-08 20:23:04 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-08 20:23:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-08 20:23:04 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-08 20:23:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:23:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:23:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:23:04 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:23:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:23:06 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:23:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:23:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-08 20:23:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-08 20:23:06 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-08 20:23:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-08 20:23:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-08 20:23:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-08 20:23:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-08 20:23:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:23:06 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-08 20:23:06 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-08 20:23:06 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-08 20:23:06 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-08 20:23:06 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-08 20:23:06 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-08 20:23:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:23:06 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-08 20:23:06 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-08 20:23:06 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-08 20:23:06 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-08 20:23:06 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-08 20:23:06 START begin_task: Starting task 'selecting calibration port' 2009-Apr-08 20:23:06 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-08 20:23:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-08 20:23:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:23:06 START begin_task: Starting task 'waiting on calport' 2009-Apr-08 20:23:06 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-08 20:23:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:23:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:23:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:23:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-08 20:23:07 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-08 20:23:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-08 20:23:07 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:23:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:23:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:23:07 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:23:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:23:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:23:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:23:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:23:07 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:23:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:23:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-08 20:23:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-08 20:23:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:23:07 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-08 20:23:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-08 20:23:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:23:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:23:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:23:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:23:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:23:07 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-08 20:23:07 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-08 20:23:07 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-08 20:23:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:23:07 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-08 20:23:07 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-08 20:23:07 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-08 20:23:07 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-08 20:23:07 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-08 20:23:07 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-08 20:23:07 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-08 20:23:07 LOG3 track_source: Calling 'track_source galfasrc 090630.0 +201148 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-08 20:23:07 START begin_task: Starting task 'sending tracking commands' 2009-Apr-08 20:23:07 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-08 20:23:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-08 20:23:07 INFO1 track_source: Starting to track galfasrc 2009-Apr-08 20:23:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-08 20:23:08 LOG3 vw_send: To DATATAKING: set ra 090630.0 2009-Apr-08 20:23:08 LOG3 vw_send: To DATATAKING: set dec +201148 2009-Apr-08 20:23:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-08 20:23:08 LOG3 vw_send: To DATATAKING: pnt tr 090630.0 +201148 -CJ 2009-Apr-08 20:23:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:23:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-08 20:23:08 LOG5 finish_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-08 20:23:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-08 20:23:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:23:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-08 20:23:08 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-08 20:23:08 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-08 20:23:08 LOG5 finish_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-08 20:23:08 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-08 20:23:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:23:08 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-08 20:23:08 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-08 20:23:08 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-08 20:23:08 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-08 20:23:08 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:23:08 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-08 20:23:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-08 20:23:08 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-08 20:23:08 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-08 20:23:08 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-08 20:23:08 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-08 20:23:08 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-08 20:23:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: set ra 090630.0 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: set dec +201148 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: vw% 090630.0 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: vw% +201148 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: pnt tr 090630.0 +201148 -CJ 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-08 20:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:23:09 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-08 20:23:09 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-08 20:23:09 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-08 20:23:09 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-08 20:23:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-08 20:23:09 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:23:09 LOG5 finish_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-08 20:23:09 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-08 20:23:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:23:09 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-08 20:23:09 LOG5 end_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-08 20:23:09 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-08 20:23:09 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-08 20:23:09 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-08 20:23:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-08 20:23:09 LOG3 waittrk: Start waittrk 5 2009-Apr-08 20:23:09 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-08 20:23:09 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-08 20:23:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-08 20:23:14 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-08 20:23:14 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-08 20:23:14 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-08 20:24:10 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-08 20:24:10 INFO2 waittrk: Now tracking galfasrc 2009-Apr-08 20:24:10 LOG4 waittrk: Current telescope position: Az = 182.51 ZA = 1.82 2009-Apr-08 20:24:10 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-08 20:24:10 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-08 20:24:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:24:10 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-08 20:24:10 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-08 20:24:10 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-08 20:24:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-08 20:24:10 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-08 20:24:10 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-08 20:24:10 LOG5 begin_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-08 20:24:10 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-08 20:24:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-08 20:24:10 START begin_task: Starting task 'selecting calibration type' 2009-Apr-08 20:24:10 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-08 20:24:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-08 20:24:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:24:10 START begin_task: Starting task 'waiting on setcal' 2009-Apr-08 20:24:10 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-08 20:24:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:24:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:10 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:24:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-08 20:24:10 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-08 20:24:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:24:10 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-08 20:24:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:24:10 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-08 20:24:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:24:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:24:11 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:24:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-08 20:24:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:24:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:24:11 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:24:11 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:24:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:24:11 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:24:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:24:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-08 20:24:11 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:24:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:24:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:24:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:24:11 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-08 20:24:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-08 20:24:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-08 20:24:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:24:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:24:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:24:11 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:24:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:24:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:24:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:24:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:24:11 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-08 20:24:11 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:24:11 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-08 20:24:11 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-08 20:24:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-08 20:24:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-08 20:24:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:24:11 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-08 20:24:11 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-08 20:24:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-08 20:24:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:24:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20090408.a2010.0019.fits 2009-Apr-08 20:24:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090408.a2010.0019.fits} 2009-Apr-08 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:24:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-08 20:24:14 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-08 20:24:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-08 20:24:14 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:24:14 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-08 20:24:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-08 20:24:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:24:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:24:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:24:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:24:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-08 20:24:14 LOG5 begin_task: Level: (5) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-08 20:24:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-08 20:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-08 20:24:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-08 20:24:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 4 dB 2009-Apr-08 20:24:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-08 20:24:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-08 20:24:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-08 20:24:14 LOG5 end_task: Level: (5) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-08 20:24:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.993 1.088 ALFA beam 1: 1.019 1.008 2009-Apr-08 20:24:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.974 0.938 ALFA beam 3: 1.030 1.031 2009-Apr-08 20:24:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.027 0.886 ALFA beam 5: 1.021 0.964 2009-Apr-08 20:24:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.063 0.100 ALFA beam 7: 0.953 0.124 2009-Apr-08 20:24:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:24:15 LOG5 finish_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-08 20:24:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-08 20:24:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:24:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:24:15 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-08 20:24:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-08 20:24:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:24:15 LOG5 finish_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-08 20:24:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-08 20:24:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:24:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:24:15 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-08 20:24:15 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-08 20:24:15 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:24:15 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-08 20:24:15 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:24:15 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:24:15 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:24:15 LOG2 antvel: Parameters to Doppler: Topocentric 87854 2009 98 0.0 2009-Apr-08 20:24:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:24:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-08 20:24:15 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-08 20:24:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:24:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:24:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:24:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-08 20:24:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:24:15 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-08 20:24:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:24:15 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.112863 2009.2706369939413 18.999933 2009-Apr-08 20:24:15 LOG4 log_alfabeam: ALFABEAM 0 9.108333333332419 20.196666666666669 2009-Apr-08 20:24:15 LOG4 log_alfabeam: ALFABEAM 1 9.109254320624721 20.091394814261374 2009-Apr-08 20:24:15 LOG4 log_alfabeam: ALFABEAM 2 9.114261589889660 20.157122424113968 2009-Apr-08 20:24:15 LOG4 log_alfabeam: ALFABEAM 3 9.113581965819295 20.262868304929011 2009-Apr-08 20:24:15 LOG4 log_alfabeam: ALFABEAM 4 9.107267102281181 20.301835494167033 2009-Apr-08 20:24:15 LOG4 log_alfabeam: ALFABEAM 5 9.102156741954568 20.232142745377892 2009-Apr-08 20:24:15 LOG4 log_alfabeam: ALFABEAM 6 9.103462210254168 20.127624704616043 2009-Apr-08 20:24:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800269 2009-Apr-08 20:24:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:24:15 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-08 20:24:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:24:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:24:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:24:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1456.00 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:24:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-08 20:24:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.088 1.019 1.008 2009-Apr-08 20:24:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 0.938 1.030 1.031 2009-Apr-08 20:24:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 0.886 1.021 0.964 2009-Apr-08 20:24:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.100 0.953 0.124 2009-Apr-08 20:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-08 20:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-08 20:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-08 20:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-08 20:24:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:24:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:24:26 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-08 20:24:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:24:26 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-08 20:24:26 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-08 20:24:26 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:24:26 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-08 20:24:26 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:24:26 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:24:26 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:24:26 LOG2 antvel: Parameters to Doppler: Topocentric 87866 2009 98 0.0 2009-Apr-08 20:24:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:24:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-08 20:24:26 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-08 20:24:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:24:26 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:24:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:24:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-08 20:24:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:24:26 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-08 20:24:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:24:26 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.116206 2009.2706373741983 18.999933 2009-Apr-08 20:24:26 LOG4 log_alfabeam: ALFABEAM 0 9.108333333330693 20.196666666666648 2009-Apr-08 20:24:26 LOG4 log_alfabeam: ALFABEAM 1 9.109450893553001 20.091772984348843 2009-Apr-08 20:24:26 LOG4 log_alfabeam: ALFABEAM 2 9.114333514209001 20.159334394343130 2009-Apr-08 20:24:26 LOG4 log_alfabeam: ALFABEAM 3 9.113456294905570 20.264791699313406 2009-Apr-08 20:24:26 LOG4 log_alfabeam: ALFABEAM 4 9.107070433983703 20.301403345624966 2009-Apr-08 20:24:26 LOG4 log_alfabeam: ALFABEAM 5 9.102092449203338 20.229837884750054 2009-Apr-08 20:24:26 LOG4 log_alfabeam: ALFABEAM 6 9.103593214567459 20.125840917759717 2009-Apr-08 20:24:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800270 2009-Apr-08 20:24:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:24:27 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-08 20:24:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:24:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:24:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:24:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1468.00 2009-Apr-08 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:24:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:24:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:24:38 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-08 20:24:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:24:38 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-08 20:24:38 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-08 20:24:38 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:24:38 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-08 20:24:38 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:24:38 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:24:38 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:24:38 LOG2 antvel: Parameters to Doppler: Topocentric 87878 2009 98 0.0 2009-Apr-08 20:24:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:24:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-08 20:24:38 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-08 20:24:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:24:38 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:24:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:24:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-08 20:24:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:24:38 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-08 20:24:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:24:38 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.119548 2009.2706377544553 18.999933 2009-Apr-08 20:24:38 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333512 20.196666666666669 2009-Apr-08 20:24:38 LOG4 log_alfabeam: ALFABEAM 1 9.109646755764704 20.092224035565600 2009-Apr-08 20:24:38 LOG4 log_alfabeam: ALFABEAM 2 9.114401365124367 20.161573811635755 2009-Apr-08 20:24:38 LOG4 log_alfabeam: ALFABEAM 3 9.113326923981871 20.266668918155453 2009-Apr-08 20:24:38 LOG4 log_alfabeam: ALFABEAM 4 9.106874679567905 20.300898410894959 2009-Apr-08 20:24:38 LOG4 log_alfabeam: ALFABEAM 5 9.102032569654355 20.227511274902422 2009-Apr-08 20:24:38 LOG4 log_alfabeam: ALFABEAM 6 9.103727386155722 20.124107058182613 2009-Apr-08 20:24:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800271 2009-Apr-08 20:24:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:24:39 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-08 20:24:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:24:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:24:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:24:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1480.00 2009-Apr-08 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:24:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:24:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:24:50 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-08 20:24:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:24:50 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-08 20:24:50 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-08 20:24:50 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:24:50 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-08 20:24:50 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:24:50 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:24:50 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:24:50 LOG2 antvel: Parameters to Doppler: Topocentric 87890 2009 98 0.0 2009-Apr-08 20:24:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:24:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-08 20:24:50 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-08 20:24:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:24:50 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:24:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:24:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-08 20:24:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:24:50 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-08 20:24:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:24:50 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.122891 2009.2706381347123 18.999933 2009-Apr-08 20:24:50 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333610 20.196666666666673 2009-Apr-08 20:24:50 LOG4 log_alfabeam: ALFABEAM 1 9.109841621650324 20.092747296651872 2009-Apr-08 20:24:50 LOG4 log_alfabeam: ALFABEAM 2 9.114465039382139 20.163837471729483 2009-Apr-08 20:24:50 LOG4 log_alfabeam: ALFABEAM 3 9.113194040150056 20.268497115407044 2009-Apr-08 20:24:50 LOG4 log_alfabeam: ALFABEAM 4 9.106680124082317 20.300321550843933 2009-Apr-08 20:24:50 LOG4 log_alfabeam: ALFABEAM 5 9.101977178174957 20.225166421601340 2009-Apr-08 20:24:50 LOG4 log_alfabeam: ALFABEAM 6 9.103864521507928 20.122425463887193 2009-Apr-08 20:24:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800272 2009-Apr-08 20:24:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:24:51 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-08 20:24:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:24:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:24:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:24:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:24:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1492.00 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:25:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:25:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:25:02 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-08 20:25:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:25:02 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-08 20:25:02 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-08 20:25:02 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:25:02 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-08 20:25:02 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:25:02 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:25:02 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:25:02 LOG2 antvel: Parameters to Doppler: Topocentric 87902 2009 98 0.0 2009-Apr-08 20:25:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:25:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-08 20:25:02 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-08 20:25:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:25:02 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:25:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:25:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-08 20:25:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:25:02 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-08 20:25:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:25:02 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.126233 2009.2706385149693 18.999933 2009-Apr-08 20:25:02 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333519 20.196666666666680 2009-Apr-08 20:25:02 LOG4 log_alfabeam: ALFABEAM 1 9.110034979442490 20.093341074156282 2009-Apr-08 20:25:02 LOG4 log_alfabeam: ALFABEAM 2 9.114524380948735 20.166119340710910 2009-Apr-08 20:25:02 LOG4 log_alfabeam: ALFABEAM 3 9.113058008415365 20.270271541954063 2009-Apr-08 20:25:02 LOG4 log_alfabeam: ALFABEAM 4 9.106487276820975 20.299674709406474 2009-Apr-08 20:25:02 LOG4 log_alfabeam: ALFABEAM 5 9.101926390320804 20.222809710055312 2009-Apr-08 20:25:02 LOG4 log_alfabeam: ALFABEAM 6 9.104004238399726 20.120800178782098 2009-Apr-08 20:25:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800273 2009-Apr-08 20:25:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:25:03 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-08 20:25:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:25:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:25:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:25:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:25:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1504.00 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:25:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.086 (still bad) 2009-Apr-08 20:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-08 20:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.088 (still bad) 2009-Apr-08 20:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.088 (still bad) 2009-Apr-08 20:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-08 20:25:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:25:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:25:14 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-08 20:25:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:25:14 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-08 20:25:14 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-08 20:25:14 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-08 20:25:14 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-08 20:25:14 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:25:14 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:25:14 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:25:14 LOG2 antvel: Parameters to Doppler: Topocentric 87914 2009 98 0.0 2009-Apr-08 20:25:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:25:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-08 20:25:14 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-08 20:25:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:25:14 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:25:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:25:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-08 20:25:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:25:14 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-08 20:25:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-08 20:25:14 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.129576 2009.2706388952265 18.999933 2009-Apr-08 20:25:14 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333478 20.196666666666669 2009-Apr-08 20:25:14 LOG4 log_alfabeam: ALFABEAM 1 9.110226560967261 20.094003920125967 2009-Apr-08 20:25:14 LOG4 log_alfabeam: ALFABEAM 2 9.114579334235582 20.168416014036509 2009-Apr-08 20:25:14 LOG4 log_alfabeam: ALFABEAM 3 9.112919051022484 20.271989951341045 2009-Apr-08 20:25:14 LOG4 log_alfabeam: ALFABEAM 4 9.106296402359845 20.298959514986723 2009-Apr-08 20:25:14 LOG4 log_alfabeam: ALFABEAM 5 9.101880229342152 20.220444748318563 2009-Apr-08 20:25:14 LOG4 log_alfabeam: ALFABEAM 6 9.104146306868666 20.119232905534933 2009-Apr-08 20:25:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800274 2009-Apr-08 20:25:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:25:15 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-08 20:25:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:25:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:25:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-08 20:25:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1516.00 2009-Apr-08 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:25:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-08 20:25:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 1.086 1.015 1.008 2009-Apr-08 20:25:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 0.939 1.037 1.052 2009-Apr-08 20:25:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 0.903 1.002 0.955 2009-Apr-08 20:25:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.102 0.964 0.126 2009-Apr-08 20:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-08 20:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.083 (still bad) 2009-Apr-08 20:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.084 (still bad) 2009-Apr-08 20:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.085 (still bad) 2009-Apr-08 20:25:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:25:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:25:26 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-08 20:25:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:25:26 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-08 20:25:26 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-08 20:25:26 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-08 20:25:26 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-08 20:25:26 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:25:26 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:25:26 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:25:26 LOG2 antvel: Parameters to Doppler: Topocentric 87926 2009 98 0.0 2009-Apr-08 20:25:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:25:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-08 20:25:26 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-08 20:25:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:25:26 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:25:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:25:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-08 20:25:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:25:26 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-08 20:25:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-08 20:25:26 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.132918 2009.2706392754835 18.999933 2009-Apr-08 20:25:26 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333590 20.196666666666683 2009-Apr-08 20:25:26 LOG4 log_alfabeam: ALFABEAM 1 9.110415883072259 20.094733237611798 2009-Apr-08 20:25:26 LOG4 log_alfabeam: ALFABEAM 2 9.114629802791164 20.170721310376688 2009-Apr-08 20:25:26 LOG4 log_alfabeam: ALFABEAM 3 9.112777569307374 20.273648386341119 2009-Apr-08 20:25:26 LOG4 log_alfabeam: ALFABEAM 4 9.106107977990728 20.298178798903500 2009-Apr-08 20:25:26 LOG4 log_alfabeam: ALFABEAM 5 9.101838747638764 20.218077949720140 2009-Apr-08 20:25:26 LOG4 log_alfabeam: ALFABEAM 6 9.104290318612339 20.117726871669998 2009-Apr-08 20:25:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800275 2009-Apr-08 20:25:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:25:27 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-08 20:25:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:25:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:25:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1528.00 2009-Apr-08 20:25:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-08 20:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.084 (still bad) 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:25:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.086 (still bad) 2009-Apr-08 20:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.087 (still bad) 2009-Apr-08 20:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.084 (still bad) 2009-Apr-08 20:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.082 (still bad) 2009-Apr-08 20:25:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.083 (still bad) 2009-Apr-08 20:25:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:25:38 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-08 20:25:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:25:38 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-08 20:25:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-08 20:25:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-08 20:25:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-08 20:25:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:25:38 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-08 20:25:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:25:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-08 20:25:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:25:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:25:38 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-08 20:25:38 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-08 20:25:38 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-08 20:25:38 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-08 20:25:38 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:25:38 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:25:38 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:25:38 LOG2 antvel: Parameters to Doppler: Topocentric 87938 2009 98 0.0 2009-Apr-08 20:25:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:25:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-08 20:25:38 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-08 20:25:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:25:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:25:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:25:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-08 20:25:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:25:38 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-08 20:25:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-08 20:25:38 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.136261 2009.2706396557405 18.999933 2009-Apr-08 20:25:38 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333517 20.196666666666680 2009-Apr-08 20:25:38 LOG4 log_alfabeam: ALFABEAM 1 9.110602709002039 20.095526894432481 2009-Apr-08 20:25:38 LOG4 log_alfabeam: ALFABEAM 2 9.114675780817228 20.173031810314558 2009-Apr-08 20:25:38 LOG4 log_alfabeam: ALFABEAM 3 9.112633808074127 20.275245309795775 2009-Apr-08 20:25:38 LOG4 log_alfabeam: ALFABEAM 4 9.105922234133811 20.297334854102306 2009-Apr-08 20:25:38 LOG4 log_alfabeam: ALFABEAM 5 9.101801916762398 20.215712829681816 2009-Apr-08 20:25:38 LOG4 log_alfabeam: ALFABEAM 6 9.104436030013915 20.116283068250674 2009-Apr-08 20:25:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800276 2009-Apr-08 20:25:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:25:39 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-08 20:25:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:25:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:25:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-08 20:25:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1540.00 2009-Apr-08 20:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.084 (still bad) 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:25:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.563 (still bad) 2009-Apr-08 20:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.567 (still bad) 2009-Apr-08 20:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.563 (still bad) 2009-Apr-08 20:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.561 (still bad) 2009-Apr-08 20:25:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:25:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:25:50 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-08 20:25:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:25:50 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-08 20:25:50 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-08 20:25:50 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-08 20:25:50 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-08 20:25:50 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:25:50 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:25:50 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:25:50 LOG2 antvel: Parameters to Doppler: Topocentric 87950 2009 98 0.0 2009-Apr-08 20:25:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:25:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-08 20:25:50 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-08 20:25:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:25:50 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:25:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:25:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-08 20:25:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:25:50 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-08 20:25:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-08 20:25:50 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.139603 2009.2706400359975 18.999933 2009-Apr-08 20:25:50 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333412 20.196666666666665 2009-Apr-08 20:25:50 LOG4 log_alfabeam: ALFABEAM 1 9.110786598725326 20.096381516862035 2009-Apr-08 20:25:50 LOG4 log_alfabeam: ALFABEAM 2 9.114717232070062 20.175341392677169 2009-Apr-08 20:25:50 LOG4 log_alfabeam: ALFABEAM 3 9.112488190173089 20.276777653663224 2009-Apr-08 20:25:50 LOG4 log_alfabeam: ALFABEAM 4 9.105739602005348 20.296431262012117 2009-Apr-08 20:25:50 LOG4 log_alfabeam: ALFABEAM 5 9.101769727615109 20.213355616300230 2009-Apr-08 20:25:50 LOG4 log_alfabeam: ALFABEAM 6 9.104583021381560 20.114903845334716 2009-Apr-08 20:25:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800277 2009-Apr-08 20:25:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:25:51 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-08 20:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.564 (still bad) 2009-Apr-08 20:25:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:25:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:25:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:25:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-08 20:25:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1552.00 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.562 (still bad) 2009-Apr-08 20:25:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.570 (still bad) 2009-Apr-08 20:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.572 (still bad) 2009-Apr-08 20:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.570 (still bad) 2009-Apr-08 20:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.572 (still bad) 2009-Apr-08 20:26:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:26:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:26:02 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-08 20:26:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:26:02 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-08 20:26:02 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-08 20:26:02 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-08 20:26:02 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-08 20:26:02 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:26:02 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:26:02 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:26:02 LOG2 antvel: Parameters to Doppler: Topocentric 87962 2009 98 0.0 2009-Apr-08 20:26:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:26:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-08 20:26:02 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-08 20:26:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:26:02 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:26:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:26:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-08 20:26:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:26:02 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-08 20:26:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-08 20:26:02 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.142946 2009.2706404162545 18.999933 2009-Apr-08 20:26:02 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333483 20.196666666666676 2009-Apr-08 20:26:02 LOG4 log_alfabeam: ALFABEAM 1 9.110967358145915 20.097294425087387 2009-Apr-08 20:26:02 LOG4 log_alfabeam: ALFABEAM 2 9.114754199096158 20.177646802719813 2009-Apr-08 20:26:02 LOG4 log_alfabeam: ALFABEAM 3 9.112340969284620 20.278244645723994 2009-Apr-08 20:26:02 LOG4 log_alfabeam: ALFABEAM 4 9.105560267137051 20.295470835124693 2009-Apr-08 20:26:02 LOG4 log_alfabeam: ALFABEAM 5 9.101742103582160 20.211009552596604 2009-Apr-08 20:26:02 LOG4 log_alfabeam: ALFABEAM 6 9.104731048618204 20.113589458724388 2009-Apr-08 20:26:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800278 2009-Apr-08 20:26:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:26:03 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-08 20:26:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:26:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:26:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.572 (still bad) 2009-Apr-08 20:26:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-08 20:26:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1564.00 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.566 (still bad) 2009-Apr-08 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.572 (still bad) 2009-Apr-08 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.567 (still bad) 2009-Apr-08 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.566 (still bad) 2009-Apr-08 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.571 (still bad) 2009-Apr-08 20:26:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:26:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:26:14 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-08 20:26:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:26:14 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-08 20:26:14 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-08 20:26:14 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-08 20:26:14 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-08 20:26:14 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:26:14 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:26:14 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:26:14 LOG2 antvel: Parameters to Doppler: Topocentric 87974 2009 98 0.0 2009-Apr-08 20:26:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:26:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-08 20:26:14 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-08 20:26:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:26:14 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:26:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:26:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-08 20:26:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:26:14 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-08 20:26:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-08 20:26:14 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.146288 2009.2706407965118 18.999933 2009-Apr-08 20:26:14 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333428 20.196666666666669 2009-Apr-08 20:26:14 LOG4 log_alfabeam: ALFABEAM 1 9.111144601431256 20.098261635268827 2009-Apr-08 20:26:14 LOG4 log_alfabeam: ALFABEAM 2 9.114786702806843 20.179942172257459 2009-Apr-08 20:26:14 LOG4 log_alfabeam: ALFABEAM 3 9.112192574438042 20.279644144782161 2009-Apr-08 20:26:14 LOG4 log_alfabeam: ALFABEAM 4 9.105384604217498 20.294457730453640 2009-Apr-08 20:26:14 LOG4 log_alfabeam: ALFABEAM 5 9.101718979346648 20.208680492498299 2009-Apr-08 20:26:14 LOG4 log_alfabeam: ALFABEAM 6 9.104879695107197 20.112341376259820 2009-Apr-08 20:26:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800279 2009-Apr-08 20:26:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:26:15 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-08 20:26:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:26:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:26:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-08 20:26:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1576.00 2009-Apr-08 20:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.568 (still bad) 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:26:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.557 (still bad) 2009-Apr-08 20:26:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:26:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.403 1.510 1.425 1.397 2009-Apr-08 20:26:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.375 1.326 1.485 1.472 2009-Apr-08 20:26:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.506 1.288 1.451 1.299 2009-Apr-08 20:26:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.565 0.103 1.394 0.127 2009-Apr-08 20:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.558 (still bad) 2009-Apr-08 20:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.559 (still bad) 2009-Apr-08 20:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.562 (still bad) 2009-Apr-08 20:26:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:26:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:26:26 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-08 20:26:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:26:26 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-08 20:26:26 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-08 20:26:26 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-08 20:26:26 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-08 20:26:26 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:26:26 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:26:26 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:26:26 LOG2 antvel: Parameters to Doppler: Topocentric 87986 2009 98 0.0 2009-Apr-08 20:26:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:26:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-08 20:26:26 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-08 20:26:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:26:26 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:26:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:26:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-08 20:26:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:26:26 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-08 20:26:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-08 20:26:26 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.149630 2009.2706411767688 18.999933 2009-Apr-08 20:26:26 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333356 20.196666666666658 2009-Apr-08 20:26:26 LOG4 log_alfabeam: ALFABEAM 1 9.111318133431984 20.099279772882237 2009-Apr-08 20:26:26 LOG4 log_alfabeam: ALFABEAM 2 9.114814821711304 20.182223888268734 2009-Apr-08 20:26:26 LOG4 log_alfabeam: ALFABEAM 3 9.112043299512301 20.280975755366025 2009-Apr-08 20:26:26 LOG4 log_alfabeam: ALFABEAM 4 9.105212797709758 20.293395434553759 2009-Apr-08 20:26:26 LOG4 log_alfabeam: ALFABEAM 5 9.101700241623119 20.206371944989780 2009-Apr-08 20:26:26 LOG4 log_alfabeam: ALFABEAM 6 9.105028683965616 20.111159489318105 2009-Apr-08 20:26:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800280 2009-Apr-08 20:26:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:26:27 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-08 20:26:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:26:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:26:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-08 20:26:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1588.00 2009-Apr-08 20:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.562 (still bad) 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:26:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.547 (still bad) 2009-Apr-08 20:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.549 (still bad) 2009-Apr-08 20:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.545 (still bad) 2009-Apr-08 20:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.548 (still bad) 2009-Apr-08 20:26:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:26:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:26:38 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-08 20:26:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:26:38 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-08 20:26:38 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-08 20:26:38 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-08 20:26:38 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-08 20:26:38 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:26:38 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:26:38 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:26:38 LOG2 antvel: Parameters to Doppler: Topocentric 87998 2009 98 0.0 2009-Apr-08 20:26:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:26:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-08 20:26:38 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-08 20:26:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:26:38 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:26:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:26:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-08 20:26:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:26:38 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-08 20:26:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-08 20:26:38 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.152973 2009.2706415570258 18.999933 2009-Apr-08 20:26:38 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333333 20.196666666666662 2009-Apr-08 20:26:38 LOG4 log_alfabeam: ALFABEAM 1 9.111487783552260 20.100345368200877 2009-Apr-08 20:26:38 LOG4 log_alfabeam: ALFABEAM 2 9.114838651025456 20.184488539122324 2009-Apr-08 20:26:38 LOG4 log_alfabeam: ALFABEAM 3 9.111893430952685 20.282239407806223 2009-Apr-08 20:26:38 LOG4 log_alfabeam: ALFABEAM 4 9.105045007080056 20.292287512357721 2009-Apr-08 20:26:38 LOG4 log_alfabeam: ALFABEAM 5 9.101685762078084 20.204087177482762 2009-Apr-08 20:26:38 LOG4 log_alfabeam: ALFABEAM 6 9.105177748469170 20.110043398846848 2009-Apr-08 20:26:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800281 2009-Apr-08 20:26:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:26:39 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-08 20:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.550 (still bad) 2009-Apr-08 20:26:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:26:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:26:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-08 20:26:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1600.00 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.550 (still bad) 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:26:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.543 (still bad) 2009-Apr-08 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.549 (still bad) 2009-Apr-08 20:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.546 (still bad) 2009-Apr-08 20:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.545 (still bad) 2009-Apr-08 20:26:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:26:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:26:50 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-08 20:26:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:26:50 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-08 20:26:50 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-08 20:26:50 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-08 20:26:50 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-08 20:26:50 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:26:50 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:26:50 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:26:50 LOG2 antvel: Parameters to Doppler: Topocentric 88010 2009 98 0.0 2009-Apr-08 20:26:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:26:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-08 20:26:50 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-08 20:26:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:26:50 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-08 20:26:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:26:50 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-08 20:26:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-08 20:26:50 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.156315 2009.2706419372828 18.999933 2009-Apr-08 20:26:50 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333411 20.196666666666673 2009-Apr-08 20:26:50 LOG4 log_alfabeam: ALFABEAM 1 9.111653259059690 20.101453877447902 2009-Apr-08 20:26:50 LOG4 log_alfabeam: ALFABEAM 2 9.114858285133423 20.186730928802390 2009-Apr-08 20:26:50 LOG4 log_alfabeam: ALFABEAM 3 9.111743380520421 20.283434297737031 2009-Apr-08 20:26:50 LOG4 log_alfabeam: ALFABEAM 4 9.104881511808227 20.291138621419918 2009-Apr-08 20:26:50 LOG4 log_alfabeam: ALFABEAM 5 9.101675406832902 20.201831214975588 2009-Apr-08 20:26:50 LOG4 log_alfabeam: ALFABEAM 6 9.105326500302064 20.108993349977521 2009-Apr-08 20:26:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800282 2009-Apr-08 20:26:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:26:51 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-08 20:26:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:26:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.547 (still bad) 2009-Apr-08 20:26:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-08 20:26:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1612.00 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:26:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.547 (still bad) 2009-Apr-08 20:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.545 (still bad) 2009-Apr-08 20:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.548 (still bad) 2009-Apr-08 20:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.545 (still bad) 2009-Apr-08 20:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.545 (still bad) 2009-Apr-08 20:27:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:27:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:27:02 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-08 20:27:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:27:02 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-08 20:27:02 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-08 20:27:02 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-08 20:27:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-08 20:27:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:27:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:27:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:27:02 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-08 20:27:02 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:27:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:27:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:27:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:27:02 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-08 20:27:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-08 20:27:02 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-08 20:27:02 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:27:02 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-08 20:27:02 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:27:02 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:27:02 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:27:02 LOG2 antvel: Parameters to Doppler: Topocentric 88022 2009 98 0.0 2009-Apr-08 20:27:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:27:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-08 20:27:02 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-08 20:27:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:27:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:27:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:27:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-08 20:27:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:27:02 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-08 20:27:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:27:02 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.159658 2009.2706423175398 18.999933 2009-Apr-08 20:27:02 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333354 20.196666666666665 2009-Apr-08 20:27:02 LOG4 log_alfabeam: ALFABEAM 1 9.111814497321372 20.102601990641567 2009-Apr-08 20:27:02 LOG4 log_alfabeam: ALFABEAM 2 9.114873862149574 20.188948825341981 2009-Apr-08 20:27:02 LOG4 log_alfabeam: ALFABEAM 3 9.111593368725810 20.284561458630076 2009-Apr-08 20:27:02 LOG4 log_alfabeam: ALFABEAM 4 9.104722363310778 20.289952117001942 2009-Apr-08 20:27:02 LOG4 log_alfabeam: ALFABEAM 5 9.101669011716547 20.199606059379548 2009-Apr-08 20:27:02 LOG4 log_alfabeam: ALFABEAM 6 9.105474743603681 20.108007969644305 2009-Apr-08 20:27:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800283 2009-Apr-08 20:27:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:27:03 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-08 20:27:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:27:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:27:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-08 20:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.550 (still bad) 2009-Apr-08 20:27:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1624.00 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:27:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.550 (still bad) 2009-Apr-08 20:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-08 20:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-08 20:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-08 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-08 20:27:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:27:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:27:14 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-08 20:27:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:27:14 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-08 20:27:14 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-08 20:27:14 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:27:14 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-08 20:27:14 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:27:14 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:27:14 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:27:14 LOG2 antvel: Parameters to Doppler: Topocentric 88034 2009 98 0.0 2009-Apr-08 20:27:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:27:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-08 20:27:14 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-08 20:27:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:27:14 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:27:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:27:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-08 20:27:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:27:14 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-08 20:27:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:27:14 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.163000 2009.270642697797 18.999933 2009-Apr-08 20:27:14 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333388 20.196666666666676 2009-Apr-08 20:27:14 LOG4 log_alfabeam: ALFABEAM 1 9.111971269564691 20.103785026132954 2009-Apr-08 20:27:14 LOG4 log_alfabeam: ALFABEAM 2 9.114885514411599 20.191137615317263 2009-Apr-08 20:27:14 LOG4 log_alfabeam: ALFABEAM 3 9.111443781331440 20.285620874622097 2009-Apr-08 20:27:14 LOG4 log_alfabeam: ALFABEAM 4 9.104567776626157 20.288732754558318 2009-Apr-08 20:27:14 LOG4 log_alfabeam: ALFABEAM 5 9.101666409832220 20.197416073173592 2009-Apr-08 20:27:14 LOG4 log_alfabeam: ALFABEAM 6 9.105622121062636 20.107086809756190 2009-Apr-08 20:27:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800284 2009-Apr-08 20:27:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:27:15 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-08 20:27:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:27:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:27:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-08 20:27:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1636.00 2009-Apr-08 20:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:27:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:27:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.107 1.044 1.024 2009-Apr-08 20:27:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.957 1.080 1.070 2009-Apr-08 20:27:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.926 1.051 0.973 2009-Apr-08 20:27:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.103 0.984 0.127 2009-Apr-08 20:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:27:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:27:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:27:26 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-08 20:27:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:27:26 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-08 20:27:26 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-08 20:27:26 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:27:26 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-08 20:27:26 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:27:26 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:27:26 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:27:26 LOG2 antvel: Parameters to Doppler: Topocentric 88046 2009 98 0.0 2009-Apr-08 20:27:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:27:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-08 20:27:26 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-08 20:27:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:27:26 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:27:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:27:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-08 20:27:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:27:26 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-08 20:27:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:27:26 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.166343 2009.270643078054 18.999933 2009-Apr-08 20:27:26 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333382 20.196666666666669 2009-Apr-08 20:27:26 LOG4 log_alfabeam: ALFABEAM 1 9.112123565794855 20.104999712181048 2009-Apr-08 20:27:26 LOG4 log_alfabeam: ALFABEAM 2 9.114893403575419 20.193295618709445 2009-Apr-08 20:27:26 LOG4 log_alfabeam: ALFABEAM 3 9.111294808899695 20.286614149378046 2009-Apr-08 20:27:26 LOG4 log_alfabeam: ALFABEAM 4 9.104417750636459 20.287483817110679 2009-Apr-08 20:27:26 LOG4 log_alfabeam: ALFABEAM 5 9.101667418558176 20.195262652315773 2009-Apr-08 20:27:26 LOG4 log_alfabeam: ALFABEAM 6 9.105768469702356 20.106228018194663 2009-Apr-08 20:27:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800285 2009-Apr-08 20:27:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:27:27 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-08 20:27:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:27:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:27:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-08 20:27:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1648.00 2009-Apr-08 20:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:27:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:27:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:27:38 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-08 20:27:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:27:38 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-08 20:27:38 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-08 20:27:38 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:27:38 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-08 20:27:38 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:27:38 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:27:38 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:27:38 LOG2 antvel: Parameters to Doppler: Topocentric 88058 2009 98 0.0 2009-Apr-08 20:27:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:27:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-08 20:27:38 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-08 20:27:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:27:38 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:27:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:27:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-08 20:27:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:27:38 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-08 20:27:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:27:38 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.169685 2009.270643458311 18.999933 2009-Apr-08 20:27:38 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333354 20.196666666666669 2009-Apr-08 20:27:38 LOG4 log_alfabeam: ALFABEAM 1 9.112271218568882 20.106241396759341 2009-Apr-08 20:27:38 LOG4 log_alfabeam: ALFABEAM 2 9.114897690132842 20.195418860331500 2009-Apr-08 20:27:38 LOG4 log_alfabeam: ALFABEAM 3 9.111146802983720 20.287541937249635 2009-Apr-08 20:27:38 LOG4 log_alfabeam: ALFABEAM 4 9.104272439219613 20.286209993351694 2009-Apr-08 20:27:38 LOG4 log_alfabeam: ALFABEAM 5 9.101671848502045 20.193149463573345 2009-Apr-08 20:27:38 LOG4 log_alfabeam: ALFABEAM 6 9.105913469484621 20.105430577318362 2009-Apr-08 20:27:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800286 2009-Apr-08 20:27:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:27:39 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-08 20:27:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:27:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:27:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-08 20:27:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1660.00 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:27:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2009-Apr-08 20:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-08 20:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-08 20:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-08 20:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Apr-08 20:27:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:27:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:27:50 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-08 20:27:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:27:50 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-08 20:27:50 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-08 20:27:50 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:27:50 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-08 20:27:50 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:27:50 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:27:50 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:27:50 LOG2 antvel: Parameters to Doppler: Topocentric 88070 2009 98 0.0 2009-Apr-08 20:27:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:27:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-08 20:27:50 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-08 20:27:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:27:50 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:27:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:27:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-08 20:27:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:27:50 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-08 20:27:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:27:50 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.173028 2009.270643838568 18.999933 2009-Apr-08 20:27:50 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333345 20.196666666666665 2009-Apr-08 20:27:50 LOG4 log_alfabeam: ALFABEAM 1 9.112414265962673 20.107506981209323 2009-Apr-08 20:27:50 LOG4 log_alfabeam: ALFABEAM 2 9.114898550203298 20.197506232241530 2009-Apr-08 20:27:50 LOG4 log_alfabeam: ALFABEAM 3 9.110999918869412 20.288406289272704 2009-Apr-08 20:27:50 LOG4 log_alfabeam: ALFABEAM 4 9.104131793821622 20.284914363242482 2009-Apr-08 20:27:50 LOG4 log_alfabeam: ALFABEAM 5 9.101679508012465 20.191077298015195 2009-Apr-08 20:27:50 LOG4 log_alfabeam: ALFABEAM 6 9.106056993898047 20.104692278702828 2009-Apr-08 20:27:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800287 2009-Apr-08 20:27:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:27:51 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-08 20:27:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:27:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:27:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:27:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-08 20:27:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-08 20:27:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1672.00 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-08 20:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.088 (still bad) 2009-Apr-08 20:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.087 (still bad) 2009-Apr-08 20:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.087 (still bad) 2009-Apr-08 20:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.090 (still bad) 2009-Apr-08 20:28:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:28:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:28:02 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-08 20:28:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:28:02 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-08 20:28:02 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-08 20:28:02 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-08 20:28:02 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-08 20:28:02 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:28:02 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:28:02 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:28:02 LOG2 antvel: Parameters to Doppler: Topocentric 88082 2009 98 0.0 2009-Apr-08 20:28:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:28:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-08 20:28:02 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-08 20:28:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:28:02 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:28:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:28:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-08 20:28:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:28:02 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-08 20:28:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-08 20:28:02 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.176370 2009.2706442188251 18.999933 2009-Apr-08 20:28:02 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333402 20.196666666666669 2009-Apr-08 20:28:02 LOG4 log_alfabeam: ALFABEAM 1 9.112552596584683 20.108791981463316 2009-Apr-08 20:28:02 LOG4 log_alfabeam: ALFABEAM 2 9.114896162808893 20.199554412076054 2009-Apr-08 20:28:02 LOG4 log_alfabeam: ALFABEAM 3 9.110854468764504 20.289208397044760 2009-Apr-08 20:28:02 LOG4 log_alfabeam: ALFABEAM 4 9.103995912960757 20.283601415063568 2009-Apr-08 20:28:02 LOG4 log_alfabeam: ALFABEAM 5 9.101690195057355 20.189049134182724 2009-Apr-08 20:28:02 LOG4 log_alfabeam: ALFABEAM 6 9.106198763524604 20.104011666139961 2009-Apr-08 20:28:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800288 2009-Apr-08 20:28:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:28:03 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-08 20:28:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:28:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:28:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-08 20:28:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1684.00 2009-Apr-08 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:28:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.086 (still bad) 2009-Apr-08 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.091 (still bad) 2009-Apr-08 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.087 (still bad) 2009-Apr-08 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.086 (still bad) 2009-Apr-08 20:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-08 20:28:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:28:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:28:14 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-08 20:28:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:28:14 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-08 20:28:14 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-08 20:28:14 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-08 20:28:14 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-08 20:28:14 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:28:14 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:28:14 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:28:14 LOG2 antvel: Parameters to Doppler: Topocentric 88094 2009 98 0.0 2009-Apr-08 20:28:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:28:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-08 20:28:14 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-08 20:28:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:28:14 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:28:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:28:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-08 20:28:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:28:14 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-08 20:28:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-08 20:28:14 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.179713 2009.2706445990823 18.999933 2009-Apr-08 20:28:14 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333396 20.196666666666665 2009-Apr-08 20:28:14 LOG4 log_alfabeam: ALFABEAM 1 9.112686290078253 20.110093575403692 2009-Apr-08 20:28:14 LOG4 log_alfabeam: ALFABEAM 2 9.114890710092224 20.201562849099567 2009-Apr-08 20:28:14 LOG4 log_alfabeam: ALFABEAM 3 9.110710570180053 20.289950630711992 2009-Apr-08 20:28:14 LOG4 log_alfabeam: ALFABEAM 4 9.103864707544057 20.282273927572707 2009-Apr-08 20:28:14 LOG4 log_alfabeam: ALFABEAM 5 9.101703717313757 20.187065192746200 2009-Apr-08 20:28:14 LOG4 log_alfabeam: ALFABEAM 6 9.106338689299855 20.103386296991950 2009-Apr-08 20:28:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800289 2009-Apr-08 20:28:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:28:15 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-08 20:28:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:28:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:28:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-08 20:28:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1696.00 2009-Apr-08 20:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.089 (still bad) 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:28:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.084 (still bad) 2009-Apr-08 20:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.088 (still bad) 2009-Apr-08 20:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.084 (still bad) 2009-Apr-08 20:28:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-08 20:28:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.082 1.005 1.001 2009-Apr-08 20:28:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 0.938 1.025 1.048 2009-Apr-08 20:28:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.044 0.912 0.983 0.941 2009-Apr-08 20:28:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.102 0.963 0.126 2009-Apr-08 20:28:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:28:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:28:26 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-08 20:28:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:28:26 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-08 20:28:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-08 20:28:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-08 20:28:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-08 20:28:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:28:26 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-08 20:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.085 (still bad) 2009-Apr-08 20:28:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:28:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-08 20:28:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:28:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:28:26 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-08 20:28:26 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-08 20:28:26 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-08 20:28:26 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-08 20:28:26 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:28:26 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27064 J 2009-Apr-08 20:28:26 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:28:26 LOG2 antvel: Parameters to Doppler: Topocentric 88106 2009 98 0.0 2009-Apr-08 20:28:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:28:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-08 20:28:26 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-08 20:28:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:28:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:28:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:28:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-08 20:28:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:28:26 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-08 20:28:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-08 20:28:26 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.183055 2009.2706449793393 18.999933 2009-Apr-08 20:28:26 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333416 20.196666666666680 2009-Apr-08 20:28:26 LOG4 log_alfabeam: ALFABEAM 1 9.112815284093854 20.111407551577297 2009-Apr-08 20:28:26 LOG4 log_alfabeam: ALFABEAM 2 9.114882380840490 20.203528854251172 2009-Apr-08 20:28:26 LOG4 log_alfabeam: ALFABEAM 3 9.110568493698795 20.290634584330501 2009-Apr-08 20:28:26 LOG4 log_alfabeam: ALFABEAM 4 9.103738228116281 20.280936089719667 2009-Apr-08 20:28:26 LOG4 log_alfabeam: ALFABEAM 5 9.101719868702256 20.185127803400135 2009-Apr-08 20:28:26 LOG4 log_alfabeam: ALFABEAM 6 9.106476533194067 20.102814403660311 2009-Apr-08 20:28:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800290 2009-Apr-08 20:28:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:28:27 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-08 20:28:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:28:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-08 20:28:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-08 20:28:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1708.00 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.562 (still bad) 2009-Apr-08 20:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.568 (still bad) 2009-Apr-08 20:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.564 (still bad) 2009-Apr-08 20:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.563 (still bad) 2009-Apr-08 20:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.565 (still bad) 2009-Apr-08 20:28:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:28:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:28:38 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-08 20:28:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:28:38 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-08 20:28:38 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-08 20:28:38 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-08 20:28:38 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-08 20:28:38 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:28:38 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:28:38 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:28:38 LOG2 antvel: Parameters to Doppler: Topocentric 88118 2009 98 0.0 2009-Apr-08 20:28:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:28:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-08 20:28:38 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-08 20:28:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:28:38 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:28:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:28:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-08 20:28:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:28:38 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-08 20:28:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-08 20:28:38 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.186398 2009.2706453595963 18.999933 2009-Apr-08 20:28:38 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333366 20.196666666666665 2009-Apr-08 20:28:38 LOG4 log_alfabeam: ALFABEAM 1 9.112939692279939 20.112731434800146 2009-Apr-08 20:28:38 LOG4 log_alfabeam: ALFABEAM 2 9.114871355936010 20.205452392095559 2009-Apr-08 20:28:38 LOG4 log_alfabeam: ALFABEAM 3 9.110428319025594 20.291262824374439 2009-Apr-08 20:28:38 LOG4 log_alfabeam: ALFABEAM 4 9.103616352859934 20.279590314526548 2009-Apr-08 20:28:38 LOG4 log_alfabeam: ALFABEAM 5 9.101738463103635 20.183236674980424 2009-Apr-08 20:28:38 LOG4 log_alfabeam: ALFABEAM 6 9.106612242420015 20.102293421680343 2009-Apr-08 20:28:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800291 2009-Apr-08 20:28:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:28:39 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-08 20:28:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:28:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-08 20:28:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-08 20:28:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1720.00 2009-Apr-08 20:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.564 (still bad) 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:28:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.570 (still bad) 2009-Apr-08 20:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.572 (still bad) 2009-Apr-08 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.574 (still bad) 2009-Apr-08 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.572 (still bad) 2009-Apr-08 20:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.573 (still bad) 2009-Apr-08 20:28:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:28:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:28:50 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-08 20:28:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:28:50 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-08 20:28:50 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-08 20:28:50 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-08 20:28:50 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-08 20:28:50 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:28:50 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:28:50 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:28:50 LOG2 antvel: Parameters to Doppler: Topocentric 88130 2009 98 0.0 2009-Apr-08 20:28:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:28:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-08 20:28:50 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-08 20:28:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:28:50 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:28:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:28:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-08 20:28:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:28:50 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-08 20:28:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-08 20:28:50 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.189740 2009.2706457398533 18.999933 2009-Apr-08 20:28:50 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333322 20.196666666666665 2009-Apr-08 20:28:50 LOG4 log_alfabeam: ALFABEAM 1 9.113059493456412 20.114061357047827 2009-Apr-08 20:28:50 LOG4 log_alfabeam: ALFABEAM 2 9.114857826461639 20.207331361884926 2009-Apr-08 20:28:50 LOG4 log_alfabeam: ALFABEAM 3 9.110290275245816 20.291837220757035 2009-Apr-08 20:28:50 LOG4 log_alfabeam: ALFABEAM 4 9.103499092452335 20.278240426865718 2009-Apr-08 20:28:50 LOG4 log_alfabeam: ALFABEAM 5 9.101759297391034 20.181393549835651 2009-Apr-08 20:28:50 LOG4 log_alfabeam: ALFABEAM 6 9.106745619033969 20.101821387368172 2009-Apr-08 20:28:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800292 2009-Apr-08 20:28:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:28:51 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-08 20:28:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:28:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-08 20:28:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:28:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:28:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-08 20:28:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1732.00 2009-Apr-08 20:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.573 (still bad) 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:28:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.570 (still bad) 2009-Apr-08 20:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.574 (still bad) 2009-Apr-08 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.570 (still bad) 2009-Apr-08 20:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.570 (still bad) 2009-Apr-08 20:29:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:29:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:29:02 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-08 20:29:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:29:02 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-08 20:29:02 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-08 20:29:02 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-08 20:29:02 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-08 20:29:02 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:29:02 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:29:02 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:29:02 LOG2 antvel: Parameters to Doppler: Topocentric 88142 2009 98 0.0 2009-Apr-08 20:29:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:29:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-08 20:29:02 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-08 20:29:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:29:02 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:29:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:29:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-08 20:29:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:29:02 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-08 20:29:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-08 20:29:02 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.193082 2009.2706461201105 18.999933 2009-Apr-08 20:29:02 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333350 20.196666666666673 2009-Apr-08 20:29:02 LOG4 log_alfabeam: ALFABEAM 1 9.113174793591091 20.115394830117687 2009-Apr-08 20:29:02 LOG4 log_alfabeam: ALFABEAM 2 9.114841971267625 20.209165641151181 2009-Apr-08 20:29:02 LOG4 log_alfabeam: ALFABEAM 3 9.110154446472290 20.292360277668070 2009-Apr-08 20:29:02 LOG4 log_alfabeam: ALFABEAM 4 9.103386333399635 20.276888844909092 2009-Apr-08 20:29:02 LOG4 log_alfabeam: ALFABEAM 5 9.101782189732040 20.179598228198596 2009-Apr-08 20:29:02 LOG4 log_alfabeam: ALFABEAM 6 9.106876604925812 20.101395831832360 2009-Apr-08 20:29:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800293 2009-Apr-08 20:29:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:29:03 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-08 20:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.571 (still bad) 2009-Apr-08 20:29:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:29:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-08 20:29:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-08 20:29:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1744.00 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.574 (still bad) 2009-Apr-08 20:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.561 (still bad) 2009-Apr-08 20:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.567 (still bad) 2009-Apr-08 20:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.561 (still bad) 2009-Apr-08 20:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.560 (still bad) 2009-Apr-08 20:29:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:29:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:29:14 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-08 20:29:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:29:14 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-08 20:29:14 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-08 20:29:14 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-08 20:29:14 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-08 20:29:14 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:29:14 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:29:14 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:29:14 LOG2 antvel: Parameters to Doppler: Topocentric 88154 2009 98 0.0 2009-Apr-08 20:29:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:29:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-08 20:29:14 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-08 20:29:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:29:14 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:29:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:29:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-08 20:29:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:29:14 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-08 20:29:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-08 20:29:14 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.196425 2009.2706465003675 18.999933 2009-Apr-08 20:29:14 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333361 20.196666666666673 2009-Apr-08 20:29:14 LOG4 log_alfabeam: ALFABEAM 1 9.113285706168098 20.116729567225494 2009-Apr-08 20:29:14 LOG4 log_alfabeam: ALFABEAM 2 9.114823962541168 20.210955282179150 2009-Apr-08 20:29:14 LOG4 log_alfabeam: ALFABEAM 3 9.110020901366852 20.292834476327801 2009-Apr-08 20:29:14 LOG4 log_alfabeam: ALFABEAM 4 9.103277955403554 20.275537782033386 2009-Apr-08 20:29:14 LOG4 log_alfabeam: ALFABEAM 5 9.101806966683990 20.177850349315392 2009-Apr-08 20:29:14 LOG4 log_alfabeam: ALFABEAM 6 9.107005155918007 20.101014332032776 2009-Apr-08 20:29:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800294 2009-Apr-08 20:29:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:29:15 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-08 20:29:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:29:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-08 20:29:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.563 (still bad) 2009-Apr-08 20:29:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-08 20:29:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1756.00 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:29:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.563 (still bad) 2009-Apr-08 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.549 (still bad) 2009-Apr-08 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.551 (still bad) 2009-Apr-08 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.548 (still bad) 2009-Apr-08 20:29:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-08 20:29:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.367 1.493 1.393 1.388 2009-Apr-08 20:29:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.364 1.317 1.447 1.455 2009-Apr-08 20:29:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.480 1.292 1.405 1.274 2009-Apr-08 20:29:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.548 0.102 1.381 0.126 2009-Apr-08 20:29:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:29:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:29:26 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-08 20:29:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:29:26 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-08 20:29:26 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-08 20:29:26 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-08 20:29:26 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-08 20:29:26 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:29:26 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:29:26 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:29:26 LOG2 antvel: Parameters to Doppler: Topocentric 88166 2009 98 0.0 2009-Apr-08 20:29:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:29:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-08 20:29:26 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-08 20:29:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:29:26 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:29:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:29:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-08 20:29:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:29:26 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-08 20:29:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-08 20:29:26 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.199767 2009.2706468806246 18.999933 2009-Apr-08 20:29:26 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333345 20.196666666666665 2009-Apr-08 20:29:26 LOG4 log_alfabeam: ALFABEAM 1 9.113392256854343 20.118062282213440 2009-Apr-08 20:29:26 LOG4 log_alfabeam: ALFABEAM 2 9.114803984096957 20.212698948117254 2009-Apr-08 20:29:26 LOG4 log_alfabeam: ALFABEAM 3 9.109889810892843 20.293261896624053 2009-Apr-08 20:29:26 LOG4 log_alfabeam: ALFABEAM 4 9.103173924416954 20.274190461032546 2009-Apr-08 20:29:26 LOG4 log_alfabeam: ALFABEAM 5 9.101833439001188 20.176150915692354 2009-Apr-08 20:29:26 LOG4 log_alfabeam: ALFABEAM 6 9.107131128621750 20.100674809103204 2009-Apr-08 20:29:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800295 2009-Apr-08 20:29:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:29:27 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-08 20:29:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:29:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-08 20:29:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-08 20:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.549 (still bad) 2009-Apr-08 20:29:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1768.00 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:29:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.545 (still bad) 2009-Apr-08 20:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.547 (still bad) 2009-Apr-08 20:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.548 (still bad) 2009-Apr-08 20:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.544 (still bad) 2009-Apr-08 20:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.546 (still bad) 2009-Apr-08 20:29:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:29:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:29:38 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-08 20:29:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:29:38 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-08 20:29:38 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-08 20:29:38 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-08 20:29:38 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-08 20:29:38 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:29:38 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:29:38 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:29:38 LOG2 antvel: Parameters to Doppler: Topocentric 88178 2009 98 0.0 2009-Apr-08 20:29:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:29:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-08 20:29:38 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-08 20:29:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:29:38 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:29:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:29:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-08 20:29:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-08 20:29:38 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-08 20:29:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-08 20:29:38 LOG5 log_alfabeam: Parameters: 9.1083333333333325 20.196666666666665 9.203110 2009.2706472608816 18.999933 2009-Apr-08 20:29:38 LOG4 log_alfabeam: ALFABEAM 0 9.108333333333348 20.196666666666669 2009-Apr-08 20:29:38 LOG4 log_alfabeam: ALFABEAM 1 9.113494610756835 20.119391482338212 2009-Apr-08 20:29:38 LOG4 log_alfabeam: ALFABEAM 2 9.114782191377932 20.214397608182296 2009-Apr-08 20:29:38 LOG4 log_alfabeam: ALFABEAM 3 9.109761171467476 20.293645155915197 2009-Apr-08 20:29:38 LOG4 log_alfabeam: ALFABEAM 4 9.103074070670283 20.272848289584193 2009-Apr-08 20:29:38 LOG4 log_alfabeam: ALFABEAM 5 9.101861455412509 20.174498688770978 2009-Apr-08 20:29:38 LOG4 log_alfabeam: ALFABEAM 6 9.107254546658101 20.100374776792847 2009-Apr-08 20:29:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909800296 2009-Apr-08 20:29:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-08 20:29:39 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-08 20:29:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:29:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-08 20:29:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-08 20:29:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1780.00 2009-Apr-08 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.549 (still bad) 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.545 (still bad) 2009-Apr-08 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.552 (still bad) 2009-Apr-08 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.547 (still bad) 2009-Apr-08 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.546 (still bad) 2009-Apr-08 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.547 (still bad) 2009-Apr-08 20:29:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:29:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-08 20:29:50 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-08 20:29:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-08 20:29:50 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-08 20:29:50 INFO2 smartfreq: Switching off CAL 2009-Apr-08 20:29:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:29:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:29:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:29:50 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-08 20:29:50 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:29:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:29:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:29:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:29:50 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-08 20:29:50 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-08 20:29:50 LOG5 antvel: Calling 'antvel 90630.000000 201148.000000 J Topocentric 0' 2009-Apr-08 20:29:50 LOG2 antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:29:50 LOG2 antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:29:50 LOG2 antvel: Parameters to Doppler: Topocentric 88190 2009 98 0.0 2009-Apr-08 20:29:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:29:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-08 20:29:50 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-08 20:29:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:29:50 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:29:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:29:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:50 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-08 20:29:50 LOG5 finish_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-08 20:29:50 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-08 20:29:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:29:50 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-08 20:29:50 LOG5 end_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-08 20:29:50 NOTE run_command_file: DONE with command file processing 2009-Apr-08 20:29:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-08 20:29:50 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-08 20:29:50 LOG5 finish_task: Level: (1) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-08 20:29:50 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-08 20:29:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:29:51 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-08 20:29:51 LOG5 end_task: Level: (1) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-08 20:29:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:29:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:29:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.547 (still bad) 2009-Apr-08 20:30:02 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-08 20:30:02 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-08 20:30:02 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-08 20:30:02 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-08 20:30:02 LOG5 begin_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-08 20:30:02 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-08 20:30:02 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-08 20:30:03 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-08 20:30:03 LOG5 end_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-08 20:30:03 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-08 20:30:03 LOG3 exec_msg: Closing socket 2009-Apr-08 20:30:03 LOG3 exec_msg: Closing socket 2009-Apr-08 20:30:03 LOG3 exec_msg: Closing socket 2009-Apr-08 20:30:03 LOG3 exec_msg: Closing socket 2009-Apr-08 20:30:05 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-08 20:30:05 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-08 20:30:05 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-08 20:30:05 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-08 20:30:26 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-08 20:30:27 LOG2 CIMA-antvel: Precessing RA = 09:06:30.0 Dec = +20:11:48.0 Epoch = 2009.27065 J 2009-Apr-08 20:30:27 LOG2 CIMA-antvel: Computed apparent RA = 09:07:03.2 Dec = +20:09:31.7 2009-Apr-08 20:30:27 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 88227 2009 98 0.0 2009-Apr-08 20:30:27 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:30:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-08 20:30:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-08 20:30:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-08 20:30:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-08 20:30:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-08 20:30:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-08 20:30:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-08 20:30:29 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-08 20:30:29 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-08 20:30:29 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-08 20:30:29 LOG5 begin_task: Level: (1) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-08 20:30:29 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-08 20:30:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-08 20:30:29 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-08 20:30:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:30:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:30:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:30:29 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-08 20:30:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:30:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:30:30 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-08 20:30:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:30:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:30:30 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-08 20:30:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-08 20:30:30 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-08 20:30:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-08 20:30:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-08 20:30:30 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-08 20:30:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-08 20:30:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:30:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-08 20:30:30 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-08 20:30:30 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-08 20:30:30 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-08 20:30:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-08 20:30:30 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-08 20:30:30 LOG5 finish_task: Level: (1) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-08 20:30:30 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-08 20:30:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:30:30 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-08 20:30:30 LOG5 end_task: Level: (1) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-08 20:30:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-08 20:30:31 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-08 20:30:31 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-08 20:30:31 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-08 20:30:31 LOG5 begin_task: Level: (1) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-08 20:30:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-08 20:30:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-08 20:30:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-08 20:30:31 START begin_task: Starting task 'selecting calibration port' 2009-Apr-08 20:30:31 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-08 20:30:31 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-08 20:30:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-08 20:30:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:30:31 START begin_task: Starting task 'waiting on calport' 2009-Apr-08 20:30:31 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-08 20:30:31 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-08 20:30:31 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-08 20:30:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:30:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:30:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:30:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-08 20:30:31 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-08 20:30:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-08 20:30:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-08 20:30:31 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-08 20:30:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:30:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:30:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:30:31 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-08 20:30:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:30:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:30:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:30:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:30:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:30:32 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:30:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:30:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-08 20:30:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-08 20:30:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:30:32 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-08 20:30:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-08 20:30:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-08 20:30:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:30:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:30:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:30:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:30:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:30:32 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-08 20:30:32 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-08 20:30:32 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-08 20:30:32 LOG5 finish_task: Level: (1) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-08 20:30:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-08 20:30:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:30:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-08 20:30:32 LOG5 end_task: Level: (1) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-08 20:30:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-08 20:30:32 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-08 20:30:32 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-08 20:30:32 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:30:32 LOG5 begin_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-08 20:30:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-08 20:30:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-08 20:30:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-08 20:30:32 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:30:32 LOG5 finish_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-08 20:30:32 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-08 20:30:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:30:32 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-08 20:30:32 LOG5 end_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-08 20:30:33 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-08 20:30:33 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-08 20:30:33 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-08 20:30:53 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-08 20:30:53 LOG4 exec_msg: From OBSERVER: track_new_source drift83p2 091600.0 +201148 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-08 20:30:53 LOG1 track_new_source: Calling 'track_new_source drift83p2 091600.0 +201148 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-08 20:30:53 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-08 20:30:53 LOG5 begin_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift83p2} INFO {Selecting source 'drift83p2' ...} 2009-Apr-08 20:30:53 LOG3 track_source: Calling 'track_source drift83p2 091600.0 +201148 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-08 20:30:53 START begin_task: Starting task 'sending tracking commands' 2009-Apr-08 20:30:53 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift83p2} INFO {Slewing to source 'drift83p2' ...} 2009-Apr-08 20:30:53 INFO1 track_source: Starting to track drift83p2 2009-Apr-08 20:30:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift83p2" 2009-Apr-08 20:30:53 LOG3 vw_send: To DATATAKING: set ra 091600.0 2009-Apr-08 20:30:53 LOG3 vw_send: To DATATAKING: set dec +201148 2009-Apr-08 20:30:53 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-08 20:30:53 LOG3 vw_send: To DATATAKING: pnt tr 091600.0 +201148 -CJ 2009-Apr-08 20:30:53 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:30:53 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-08 20:30:53 LOG5 finish_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-08 20:30:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:30:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-08 20:30:53 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-08 20:30:53 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-08 20:30:53 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-08 20:30:53 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-08 20:30:53 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-08 20:30:53 LOG5 finish_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-08 20:30:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:30:53 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-08 20:30:53 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-08 20:30:53 LOG5 finish_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-08 20:30:53 DONE finish_task: DONE finished selecting: new source 2009-Apr-08 20:30:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:30:53 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-08 20:30:54 LOG5 end_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift83p2" 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: set ra 091600.0 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: set dec +201148 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% 091600.0 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% +201148 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: pnt tr 091600.0 +201148 -CJ 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-08 20:30:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:32:10 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:32:10.302 (seconds: 73930.302)!} 2009-Apr-08 20:32:10 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:32:10.302 (seconds: 73930.302)! 2009-Apr-08 20:32:50 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-08 20:32:50 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-08 20:32:50 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:32:50 LOG5 begin_task: Level: (1) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-08 20:32:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-08 20:32:50 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-08 20:32:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-08 20:32:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-08 20:32:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:32:50 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-08 20:32:50 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-08 20:32:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-08 20:32:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:32:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:32:53 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:32:53 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-08 20:32:53 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-08 20:32:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-08 20:32:53 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:32:53 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-08 20:32:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-08 20:32:53 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:32:53 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:32:53 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:32:53 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:32:53 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-08 20:32:53 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-08 20:32:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-08 20:32:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:32:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-08 20:32:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 4 dB 2009-Apr-08 20:32:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-08 20:32:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-08 20:32:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-08 20:32:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-08 20:32:54 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-08 20:32:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.986 1.091 ALFA beam 1: 1.023 1.015 2009-Apr-08 20:32:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.976 0.937 ALFA beam 3: 1.036 1.031 2009-Apr-08 20:32:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.032 0.890 ALFA beam 5: 1.011 0.957 2009-Apr-08 20:32:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.061 0.100 ALFA beam 7: 0.954 0.124 2009-Apr-08 20:32:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:32:54 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-08 20:32:54 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-08 20:32:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:32:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:32:54 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-08 20:32:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-08 20:32:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:32:54 LOG5 finish_task: Level: (1) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-08 20:32:54 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-08 20:32:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-08 20:32:54 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:32:54 LOG5 end_task: Level: (1) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-08 20:32:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-08 20:32:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 1.091 1.023 1.015 2009-Apr-08 20:32:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 0.937 1.036 1.031 2009-Apr-08 20:32:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 0.890 1.011 0.957 2009-Apr-08 20:32:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.100 0.954 0.124 2009-Apr-08 20:33:10 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-08 20:33:10 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift83p2 091600.0 +201148 J 0 Topocentric velocity(optical) 2009-Apr-08 20:33:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift83p2 091600.0 +201148 J 0 Topocentric velocity(optical)' 2009-Apr-08 20:33:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-08 20:33:10 LOG5 begin_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-08 20:33:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift83p2' 2009-Apr-08 20:33:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-08 20:33:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift83p2} 2009-Apr-08 20:33:11 INFO5 fixed_driftmap: Start: year = 2009.2706539787562 RA = 09:16:33.1 Dec = +20:09:26.1 2009-Apr-08 20:33:11 NOTE fixed_driftmap: Setting ZA to 1:48:12.4 ... 2009-Apr-08 20:33:11 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 1.80 2009-Apr-08 20:33:11 LOG3 track_source: Calling 'track_source drift83p2 180.0 1.8034458573 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-08 20:33:11 START begin_task: Starting task 'sending tracking commands' 2009-Apr-08 20:33:11 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-08 20:33:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift83p2} INFO {Slewing to source 'drift83p2' ...} 2009-Apr-08 20:33:11 INFO1 track_source: Starting to track drift83p2 2009-Apr-08 20:33:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift83p2" 2009-Apr-08 20:33:11 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-08 20:33:11 LOG3 vw_send: To DATATAKING: set dec 1.8034458573 2009-Apr-08 20:33:11 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-08 20:33:11 LOG3 vw_send: To DATATAKING: pnt tr 180.0 1.8034458573 -CF 2009-Apr-08 20:33:11 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:33:11 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-08 20:33:11 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-08 20:33:11 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-08 20:33:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:33:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-08 20:33:11 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-08 20:33:11 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:33:11 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-08 20:33:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-08 20:33:11 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-08 20:33:11 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-08 20:33:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-08 20:33:11 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-08 20:33:11 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift83p2" 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: set dec 1.8034458573 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: vw% 1.8034458573 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 1.8034458573 -CF 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-08 20:33:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:33:12 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-08 20:33:12 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-08 20:33:12 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-08 20:33:12 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-08 20:33:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-08 20:33:12 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-08 20:33:12 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-08 20:33:12 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-08 20:33:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:33:12 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-08 20:33:12 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-08 20:33:12 START begin_task: Starting task 'waiting on telescope' 2009-Apr-08 20:33:12 LOG5 begin_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-08 20:33:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-08 20:33:12 LOG3 waittrk: Start waittrk 5 2009-Apr-08 20:33:12 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-08 20:33:12 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-08 20:33:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-08 20:33:17 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-08 20:33:17 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-08 20:33:17 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-08 20:33:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-08 20:33:34 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-08 20:33:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-08 20:33:34 INFO2 waittrk: Now tracking drift83p2 2009-Apr-08 20:33:34 LOG4 waittrk: Current telescope position: Az = 179.87 ZA = 1.81 2009-Apr-08 20:33:34 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-08 20:33:34 LOG5 finish_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-08 20:33:34 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-08 20:33:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:33:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-08 20:33:34 LOG5 end_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-08 20:33:34 START begin_task: Starting task 'selecting calibration type' 2009-Apr-08 20:33:34 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-08 20:33:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-08 20:33:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-08 20:33:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:33:34 START begin_task: Starting task 'waiting on setcal' 2009-Apr-08 20:33:34 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-08 20:33:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-08 20:33:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:33:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:33:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-08 20:33:35 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-08 20:33:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-08 20:33:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:33:35 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-08 20:33:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:33:35 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-08 20:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:33:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:33:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:33:35 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-08 20:33:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:33:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-08 20:33:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:33:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:33:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:33:35 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-08 20:33:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:33:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:33:35 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-08 20:33:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:33:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:33:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-08 20:33:35 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-08 20:33:35 LOG5 dopset_later: Calling 'dopset_later 24.2120194253216' 2009-Apr-08 20:33:35 INFO3 dopset_later: Setting Doppler correction for 20:33:59 (24.2 seconds from now) 2009-Apr-08 20:33:35 LOG5 antvel: Calling 'antvel 180.000000 1.803446 F Topocentric 24.2120194253216' 2009-Apr-08 20:33:35 LOG2 antvel: Transforming current Az = 180.00 ZA = 1.80 to apparent RA = 09:16:33.1 Dec = +20:09:26.1 2009-Apr-08 20:33:35 LOG2 antvel: Parameters to Doppler: Topocentric 88439 2009 98 0.0 2009-Apr-08 20:33:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-08 20:33:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-08 20:33:35 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-08 20:33:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-08 20:33:36 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-08 20:33:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:33:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:33:36 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:33:36 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-08 20:33:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-08 20:33:36 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-08 20:33:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-08 20:33:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-08 20:33:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:33:36 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-08 20:33:36 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:33:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-08 20:33:36 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-08 20:33:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-08 20:33:36 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-08 20:33:36 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-08 20:33:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-08 20:33:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:33:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:33:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:33:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-08 20:33:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-08 20:33:36 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-08 20:33:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-08 20:33:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:33:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-08 20:33:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 4 dB 2009-Apr-08 20:33:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-08 20:33:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-08 20:33:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-08 20:33:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-08 20:33:37 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-08 20:33:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.985 1.091 ALFA beam 1: 1.020 1.012 2009-Apr-08 20:33:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.973 0.937 ALFA beam 3: 1.051 1.053 2009-Apr-08 20:33:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.048 0.908 ALFA beam 5: 1.012 0.957 2009-Apr-08 20:33:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.079 0.102 ALFA beam 7: 0.963 0.126 2009-Apr-08 20:33:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:33:37 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-08 20:33:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-08 20:33:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:33:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:33:37 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-08 20:33:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-08 20:33:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-08 20:33:37 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-08 20:33:37 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-08 20:33:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:33:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-08 20:33:37 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-08 20:33:37 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:16:33.1 LST = 09:16:09.8 diff = 23.3 secs 2009-Apr-08 20:33:37 INFO2 fixed_driftmap: Waiting 21.3 seconds for RA 9:16:33 2009-Apr-08 20:33:37 INFO2 lstwait: Waiting for 21.2 secs from LST 09:16:10 to LST 09:16:31 ... 2009-Apr-08 20:33:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 21.21582263908477 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-08 20:33:37 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-08 20:33:37 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-08 20:33:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-08 20:33:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.091 1.020 1.012 2009-Apr-08 20:33:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 0.937 1.051 1.053 2009-Apr-08 20:33:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 0.908 1.012 0.957 2009-Apr-08 20:33:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.102 0.963 0.126 2009-Apr-08 20:33:58 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-08 20:33:58 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-08 20:33:58 LOG4 lstwait: Finished waiting 0.79 seconds late 2009-Apr-08 20:33:58 INFO3 lstwait: Finished waiting 2009-Apr-08 20:33:58 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-08 20:33:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:33:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:33:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:33:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:33:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-08 20:33:58 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-08 20:33:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-08 20:33:58 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-08 20:33:58 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-08 20:33:58 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-08 20:33:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-08 20:33:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-08 20:33:58 INFO2 take_data: Starting WAPP 600-second scan: 909800297 2009-Apr-08 20:33:59 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-08 20:33:59 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-08 20:33:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:33:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:33:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20090408.a2010.0020.fits 2009-Apr-08 20:33:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090408.a2010.0020.fits} 2009-Apr-08 20:33:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-08 20:33:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2040.00 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-08 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-08 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-08 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.092 (still bad) 2009-Apr-08 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-08 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-08 20:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-08 20:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-08 20:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-08 20:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-08 20:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-08 20:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-08 20:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.095 (still bad) 2009-Apr-08 20:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.094 (still bad) 2009-Apr-08 20:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-08 20:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-08 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.093 (still bad) 2009-Apr-08 20:34:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-08 20:34:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 1.094 1.021 1.015 2009-Apr-08 20:34:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 0.940 1.053 1.054 2009-Apr-08 20:34:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 0.909 1.014 0.961 2009-Apr-08 20:34:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.102 0.967 0.126 2009-Apr-08 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-08 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-08 20:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-08 20:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-08 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-08 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-08 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.094 (still bad) 2009-Apr-08 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.095 (still bad) 2009-Apr-08 20:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.095 (still bad) 2009-Apr-08 20:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2009-Apr-08 20:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-08 20:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2009-Apr-08 20:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.096 (still bad) 2009-Apr-08 20:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.095 (still bad) 2009-Apr-08 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2009-Apr-08 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-08 20:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Apr-08 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-08 20:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-08 20:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:35:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-08 20:35:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.095 1.024 1.015 2009-Apr-08 20:35:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 0.939 1.055 1.056 2009-Apr-08 20:35:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 0.910 1.015 0.962 2009-Apr-08 20:35:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 0.102 0.967 0.126 2009-Apr-08 20:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.097 (still bad) 2009-Apr-08 20:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Apr-08 20:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.102 (still bad) 2009-Apr-08 20:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-08 20:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Apr-08 20:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Apr-08 20:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:36:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:36:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.104 1.026 1.019 2009-Apr-08 20:36:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 0.939 1.059 1.061 2009-Apr-08 20:36:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.051 0.912 1.015 0.963 2009-Apr-08 20:36:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.103 0.968 0.127 2009-Apr-08 20:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:37:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:37:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 1.099 1.025 1.018 2009-Apr-08 20:37:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 0.939 1.057 1.063 2009-Apr-08 20:37:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.051 0.912 1.014 0.961 2009-Apr-08 20:37:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.103 0.968 0.126 2009-Apr-08 20:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:38:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:38:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.100 1.031 1.023 2009-Apr-08 20:38:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.937 1.060 1.062 2009-Apr-08 20:38:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 0.912 1.016 0.961 2009-Apr-08 20:38:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.103 0.970 0.127 2009-Apr-08 20:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:39:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:39:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.104 1.027 1.020 2009-Apr-08 20:39:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.949 1.057 1.063 2009-Apr-08 20:39:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 0.913 1.016 0.961 2009-Apr-08 20:39:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.103 0.967 0.127 2009-Apr-08 20:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 20:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:40:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:40:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.099 1.025 1.022 2009-Apr-08 20:40:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 0.940 1.062 1.066 2009-Apr-08 20:40:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.050 0.914 1.012 0.960 2009-Apr-08 20:40:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.103 0.967 0.127 2009-Apr-08 20:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:41:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:41:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.101 1.023 1.022 2009-Apr-08 20:41:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.944 1.063 1.069 2009-Apr-08 20:41:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 0.914 1.015 0.961 2009-Apr-08 20:41:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 0.103 0.968 0.127 2009-Apr-08 20:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2009-Apr-08 20:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-08 20:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:42:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:42:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.100 1.026 1.024 2009-Apr-08 20:42:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.944 1.057 1.062 2009-Apr-08 20:42:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.050 0.917 1.015 0.963 2009-Apr-08 20:42:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.103 0.965 0.127 2009-Apr-08 20:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-08 20:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:43:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:43:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.099 1.023 1.024 2009-Apr-08 20:43:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 0.942 1.058 1.067 2009-Apr-08 20:43:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.050 0.915 1.019 0.964 2009-Apr-08 20:43:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.103 0.968 0.127 2009-Apr-08 20:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:44:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:44:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-08 20:44:00 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-08 20:44:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-08 20:44:00 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-08 20:44:00 LOG1 fixed_driftmap: New position: year = 2009.2706745760133 RA = 09:26:03.3 RA/Dec = 09:26:36.4 +20:09:20.4 2009-Apr-08 20:44:00 NOTE fixed_driftmap: Correcting ZA to 1:48:06.7 ... 2009-Apr-08 20:44:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.8018649334 -CF 2009-Apr-08 20:44:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-08 20:44:00 START begin_task: Starting task 'WAPP calibration' 2009-Apr-08 20:44:00 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-08 20:44:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-08 20:44:00 START begin_task: Starting task 'selecting calibration type' 2009-Apr-08 20:44:00 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-08 20:44:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-08 20:44:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-08 20:44:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:44:00 START begin_task: Starting task 'waiting on setcal' 2009-Apr-08 20:44:00 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-08 20:44:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.8018649334 -CF 2009-Apr-08 20:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:44:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-08 20:44:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:44:00 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:44:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-08 20:44:00 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-08 20:44:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-08 20:44:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:44:01 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-08 20:44:01 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:44:01 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:44:01 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:44:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:44:01 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:44:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-08 20:44:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:44:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:44:01 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:44:01 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:44:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:44:01 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:44:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:44:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-08 20:44:01 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-08 20:44:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-08 20:44:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-08 20:44:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:44:01 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:44:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-08 20:44:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:44:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:44:01 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-08 20:44:01 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-08 20:44:01 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-08 20:44:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-08 20:44:01 INFO2 take_data: Starting WAPP 1-second scan: 909800298 2009-Apr-08 20:44:01 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-08 20:44:01 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-08 20:44:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:44:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-08 20:44:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2642.00 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:44:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:44:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-08 20:44:03 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-08 20:44:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-08 20:44:03 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-08 20:44:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-08 20:44:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:44:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:44:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:44:03 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-08 20:44:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:44:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.552 (still bad) 2009-Apr-08 20:44:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:44:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:44:03 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-08 20:44:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-08 20:44:03 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-08 20:44:03 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-08 20:44:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-08 20:44:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:44:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-08 20:44:03 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-08 20:44:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-08 20:44:03 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-08 20:44:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:44:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:44:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:44:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:44:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-08 20:44:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-08 20:44:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-08 20:44:04 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-08 20:44:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-08 20:44:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-08 20:44:04 INFO2 take_data: Starting WAPP 600-second scan: 909800299 2009-Apr-08 20:44:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-08 20:44:04 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-08 20:44:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:44:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:44:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-08 20:44:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2645.00 2009-Apr-08 20:44:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20090408.a2010.0021.fits 2009-Apr-08 20:44:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090408.a2010.0021.fits} 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:44:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:44:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.106 1.025 1.025 2009-Apr-08 20:44:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 0.939 1.058 1.070 2009-Apr-08 20:44:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.050 0.916 1.018 0.966 2009-Apr-08 20:44:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.103 0.969 0.127 2009-Apr-08 20:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:45:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:45:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.103 1.024 1.024 2009-Apr-08 20:45:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.942 1.058 1.067 2009-Apr-08 20:45:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 0.913 1.014 0.964 2009-Apr-08 20:45:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.103 0.971 0.128 2009-Apr-08 20:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-08 20:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-08 20:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-08 20:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-08 20:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:46:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:46:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.112 1.037 1.038 2009-Apr-08 20:46:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.946 1.066 1.077 2009-Apr-08 20:46:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.053 0.919 1.019 0.969 2009-Apr-08 20:46:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.103 0.974 0.127 2009-Apr-08 20:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-08 20:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-08 20:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-08 20:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:47:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:47:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.106 1.028 1.031 2009-Apr-08 20:47:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.944 1.066 1.079 2009-Apr-08 20:47:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.051 0.918 1.018 0.965 2009-Apr-08 20:47:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.103 0.971 0.127 2009-Apr-08 20:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-08 20:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-08 20:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-08 20:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:49:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-08 20:49:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 1.106 1.028 1.034 2009-Apr-08 20:49:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.944 1.061 1.074 2009-Apr-08 20:49:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.926 1.040 0.985 2009-Apr-08 20:49:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.104 0.970 0.128 2009-Apr-08 20:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-08 20:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Apr-08 20:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-08 20:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Apr-08 20:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-08 20:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Apr-08 20:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.121 (still bad) 2009-Apr-08 20:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 20:50:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:50:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 1.109 1.027 1.030 2009-Apr-08 20:50:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 0.942 1.060 1.069 2009-Apr-08 20:50:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.052 0.918 1.017 0.965 2009-Apr-08 20:50:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.103 0.974 0.128 2009-Apr-08 20:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-08 20:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-08 20:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-08 20:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-08 20:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-08 20:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-08 20:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-08 20:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-08 20:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-08 20:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-08 20:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:51:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:51:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.102 1.037 1.041 2009-Apr-08 20:51:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.941 1.060 1.071 2009-Apr-08 20:51:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 0.915 1.017 0.965 2009-Apr-08 20:51:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.103 0.971 0.128 2009-Apr-08 20:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-08 20:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-08 20:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-08 20:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-08 20:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-08 20:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-08 20:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-08 20:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:52:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:52:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.105 1.035 1.040 2009-Apr-08 20:52:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.942 1.061 1.073 2009-Apr-08 20:52:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.050 0.917 1.020 0.964 2009-Apr-08 20:52:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.103 0.973 0.127 2009-Apr-08 20:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-08 20:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-08 20:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-08 20:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-08 20:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:53:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:53:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.108 1.033 1.036 2009-Apr-08 20:53:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.947 1.063 1.070 2009-Apr-08 20:53:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.053 0.922 1.024 0.963 2009-Apr-08 20:53:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.103 0.974 0.128 2009-Apr-08 20:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-08 20:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Apr-08 20:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Apr-08 20:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Apr-08 20:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-08 20:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Apr-08 20:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:54:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:54:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-08 20:54:05 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-08 20:54:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-08 20:54:05 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-08 20:54:05 LOG1 fixed_driftmap: New position: year = 2009.2706937473065 RA = 09:36:10.1 RA/Dec = 09:36:43.0 +20:09:15.0 2009-Apr-08 20:54:05 NOTE fixed_driftmap: Correcting ZA to 1:48:01.3 ... 2009-Apr-08 20:54:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.8003507492 -CF 2009-Apr-08 20:54:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-08 20:54:05 START begin_task: Starting task 'WAPP calibration' 2009-Apr-08 20:54:05 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-08 20:54:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-08 20:54:05 START begin_task: Starting task 'selecting calibration type' 2009-Apr-08 20:54:05 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-08 20:54:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-08 20:54:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-08 20:54:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:54:05 START begin_task: Starting task 'waiting on setcal' 2009-Apr-08 20:54:05 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-08 20:54:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.8003507492 -CF 2009-Apr-08 20:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:54:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-08 20:54:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 20:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 20:54:05 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 20:54:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-08 20:54:05 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-08 20:54:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-08 20:54:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:54:05 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-08 20:54:05 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:54:05 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-08 20:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 20:54:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:54:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:54:06 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:54:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-08 20:54:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 20:54:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:54:06 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 20:54:06 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 20:54:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 20:54:06 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 20:54:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 20:54:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-08 20:54:06 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-08 20:54:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-08 20:54:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-08 20:54:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:54:06 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:54:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-08 20:54:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:54:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:54:06 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-08 20:54:06 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-08 20:54:06 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-08 20:54:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-08 20:54:06 INFO2 take_data: Starting WAPP 1-second scan: 909800300 2009-Apr-08 20:54:06 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-08 20:54:06 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-08 20:54:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:54:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-08 20:54:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3247.00 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:54:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 20:54:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-08 20:54:08 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-08 20:54:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-08 20:54:08 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-08 20:54:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-08 20:54:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 20:54:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 20:54:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 20:54:08 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-08 20:54:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 20:54:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-08 20:54:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.384 1.517 1.420 1.418 2009-Apr-08 20:54:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.378 1.317 1.483 1.479 2009-Apr-08 20:54:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.491 1.302 1.431 1.290 2009-Apr-08 20:54:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.556 0.104 1.391 0.128 2009-Apr-08 20:54:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 20:54:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 20:54:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 20:54:09 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-08 20:54:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-08 20:54:09 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-08 20:54:09 LOG5 finish_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-08 20:54:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-08 20:54:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 20:54:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-08 20:54:09 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-08 20:54:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-08 20:54:09 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-08 20:54:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:54:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:54:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:54:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 20:54:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-08 20:54:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-08 20:54:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-08 20:54:09 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-08 20:54:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-08 20:54:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-08 20:54:09 INFO2 take_data: Starting WAPP 600-second scan: 909800301 2009-Apr-08 20:54:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-08 20:54:09 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-08 20:54:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 20:54:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 20:54:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-08 20:54:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3250.00 2009-Apr-08 20:54:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20090408.a2010.0022.fits 2009-Apr-08 20:54:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090408.a2010.0022.fits} 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 20:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 20:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Apr-08 20:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-08 20:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-08 20:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Apr-08 20:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 20:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-08 20:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 20:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-08 20:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:55:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:55:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.109 1.034 1.036 2009-Apr-08 20:55:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.948 1.065 1.069 2009-Apr-08 20:55:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.925 1.023 0.962 2009-Apr-08 20:55:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.103 0.972 0.127 2009-Apr-08 20:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-08 20:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-08 20:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:56:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:56:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 1.106 1.030 1.033 2009-Apr-08 20:56:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.948 1.061 1.066 2009-Apr-08 20:56:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 0.925 1.023 0.963 2009-Apr-08 20:56:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.103 0.972 0.127 2009-Apr-08 20:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 20:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-08 20:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:57:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:57:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 1.111 1.034 1.039 2009-Apr-08 20:57:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.951 1.070 1.073 2009-Apr-08 20:57:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.926 1.028 0.968 2009-Apr-08 20:57:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.103 0.979 0.127 2009-Apr-08 20:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 20:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:58:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:58:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.983 1.103 1.028 1.033 2009-Apr-08 20:58:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.943 1.066 1.070 2009-Apr-08 20:58:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.056 0.920 1.023 0.961 2009-Apr-08 20:58:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.103 0.972 0.127 2009-Apr-08 20:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 20:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 20:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-08 20:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 20:59:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 20:59:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.103 1.027 1.030 2009-Apr-08 20:59:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.972 1.062 1.065 2009-Apr-08 20:59:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 0.924 1.017 0.965 2009-Apr-08 20:59:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.103 0.970 0.127 2009-Apr-08 20:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 20:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 20:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-08 20:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 20:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 20:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-08 20:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-08 20:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 20:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 20:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 20:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-08 20:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.123 (still bad) 2009-Apr-08 20:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-08 20:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-08 20:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 20:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:00:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 21:00:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.979 1.102 1.029 1.031 2009-Apr-08 21:00:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.944 1.062 1.070 2009-Apr-08 21:00:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 0.922 1.020 0.962 2009-Apr-08 21:00:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.103 0.973 0.127 2009-Apr-08 21:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-08 21:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-08 21:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-08 21:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-08 21:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-08 21:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-08 21:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-08 21:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-08 21:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-08 21:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-08 21:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 21:01:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 21:01:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.110 1.032 1.033 2009-Apr-08 21:01:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.945 1.070 1.075 2009-Apr-08 21:01:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.920 1.023 0.965 2009-Apr-08 21:01:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.103 0.974 0.127 2009-Apr-08 21:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 21:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-08 21:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.123 (still bad) 2009-Apr-08 21:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-08 21:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-08 21:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-08 21:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 21:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:02:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 21:02:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.110 1.027 1.030 2009-Apr-08 21:02:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.945 1.064 1.072 2009-Apr-08 21:02:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 0.920 1.020 0.963 2009-Apr-08 21:02:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.103 0.971 0.127 2009-Apr-08 21:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 21:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:03:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 21:03:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.103 1.032 1.033 2009-Apr-08 21:03:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.944 1.064 1.070 2009-Apr-08 21:03:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.055 0.919 1.016 0.963 2009-Apr-08 21:03:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.103 0.973 0.127 2009-Apr-08 21:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 21:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-08 21:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 21:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 21:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-08 21:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:04:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 21:04:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-08 21:04:10 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-08 21:04:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-08 21:04:10 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-08 21:04:10 LOG1 fixed_driftmap: New position: year = 2009.2707129185994 RA = 09:46:16.9 RA/Dec = 09:46:49.7 +20:09:09.8 2009-Apr-08 21:04:10 NOTE fixed_driftmap: Correcting ZA to 1:47:56.1 ... 2009-Apr-08 21:04:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.7989154107 -CF 2009-Apr-08 21:04:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-08 21:04:10 START begin_task: Starting task 'WAPP calibration' 2009-Apr-08 21:04:10 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-08 21:04:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-08 21:04:10 START begin_task: Starting task 'selecting calibration type' 2009-Apr-08 21:04:10 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-08 21:04:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-08 21:04:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-08 21:04:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 21:04:10 START begin_task: Starting task 'waiting on setcal' 2009-Apr-08 21:04:10 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-08 21:04:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.7989154107 -CF 2009-Apr-08 21:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 21:04:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-08 21:04:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-08 21:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 21:04:11 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-08 21:04:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-08 21:04:11 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-08 21:04:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 21:04:11 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-08 21:04:11 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 21:04:11 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-08 21:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:04:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 21:04:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 21:04:11 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 21:04:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-08 21:04:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-08 21:04:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-08 21:04:11 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-08 21:04:11 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-08 21:04:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-08 21:04:11 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-08 21:04:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-08 21:04:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-08 21:04:11 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-08 21:04:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-08 21:04:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-08 21:04:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 21:04:11 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 21:04:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-08 21:04:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 21:04:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 21:04:11 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-08 21:04:11 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-08 21:04:11 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-08 21:04:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-08 21:04:11 INFO2 take_data: Starting WAPP 1-second scan: 909800302 2009-Apr-08 21:04:11 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-08 21:04:11 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Apr-08 21:04:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 21:04:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-08 21:04:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3852.00 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 21:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 21:04:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-08 21:04:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-08 21:04:13 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Apr-08 21:04:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-08 21:04:13 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-08 21:04:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-08 21:04:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-08 21:04:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-08 21:04:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-08 21:04:13 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-Apr-08 21:04:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-08 21:04:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-08 21:04:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-08 21:04:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-08 21:04:13 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-Apr-08 21:04:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-08 21:04:13 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-08 21:04:13 LOG5 finish_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-08 21:04:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-08 21:04:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-08 21:04:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-08 21:04:14 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-08 21:04:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-08 21:04:14 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-08 21:04:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-08 21:04:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-08 21:04:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-08 21:04:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-08 21:04:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-08 21:04:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-08 21:04:14 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-08 21:04:14 LOG5 begin_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2009-Apr-08 21:04:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-08 21:04:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-08 21:04:14 INFO2 take_data: Starting WAPP 600-second scan: 909800303 2009-Apr-08 21:04:14 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-08 21:04:14 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Apr-08 21:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-08 21:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.562 (still bad) 2009-Apr-08 21:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-08 21:04:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-08 21:04:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3855.00 2009-Apr-08 21:04:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20090408.a2010.0023.fits 2009-Apr-08 21:04:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090408.a2010.0023.fits} 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-08 21:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.562 (still bad) 2009-Apr-08 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-08 21:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:04:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 21:04:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.105 1.035 1.037 2009-Apr-08 21:04:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.945 1.066 1.074 2009-Apr-08 21:04:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.920 1.021 0.964 2009-Apr-08 21:04:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.103 0.978 0.127 2009-Apr-08 21:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Apr-08 21:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-08 21:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-08 21:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-08 21:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 21:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-08 21:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 21:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 21:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-08 21:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-08 21:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:05:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 21:05:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 1.116 1.037 1.038 2009-Apr-08 21:05:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.953 1.072 1.075 2009-Apr-08 21:05:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.925 1.026 0.971 2009-Apr-08 21:05:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.103 0.988 0.127 2009-Apr-08 21:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-08 21:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Apr-08 21:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-08 21:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Apr-08 21:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 21:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 21:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 21:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-08 21:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 21:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 21:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-08 21:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 21:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-08 21:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-08 21:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Apr-08 21:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Apr-08 21:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Apr-08 21:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-08 21:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-08 21:06:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-08 2