2009-Apr-07 20:17:38 BEGIN executive: CIMA executive starting ... 2009-Apr-07 20:17:38 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-07 20:17:38 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-07 20:17:38 INFO4 executive: This is an ON-LINE session 2009-Apr-07 20:17:38 INFO4 executive: This is a REMOTE session 2009-Apr-07 20:17:38 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-07 20:17:38 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Manolis Papastergis' 2009-Apr-07 20:17:38 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090407' 2009-Apr-07 20:17:39 LOG2 log_preferences: Currently applied preferences: 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-07 20:17:39 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-07 20:17:39 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-07 20:17:39 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-07 20:17:39 ALERT executive: CIMA executive ready 2009-Apr-07 20:17:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:17:42 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-07 20:17:42 NOTE frontend: CIMA frontend ready 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-07 20:17:48 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-07 20:17:48 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:17:54 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-07 20:17:54 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-07 20:17:54 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-07 20:17:54 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-07 20:17:54 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-07 20:17:54 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-07 20:17:54 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-07 20:17:54 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-07 20:17:54 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-07 20:17:54 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-07 20:17:57 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-07 20:17:57 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-07 20:17:57 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-07 20:17:57 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-07 20:18:40 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-07 20:18:49 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-07 20:18:50 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-07 20:18:50 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-07 20:18:50 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-07 20:18:50 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-07 20:18:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-07 20:18:50 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-07 20:18:50 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-07 20:18:50 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-07 20:18:50 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-07 20:18:50 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-07 20:18:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-07 20:18:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-07 20:18:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-07 20:18:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-07 20:18:52 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-07 20:18:52 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-07 20:18:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-07 20:18:52 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-07 20:18:52 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-07 20:18:52 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-07 20:18:52 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-07 20:18:52 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-07 20:18:52 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-07 20:18:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-07 20:18:52 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-07 20:18:52 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-07 20:18:52 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-07 20:18:52 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-07 20:18:52 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-07 20:18:52 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-07 20:18:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:18:52 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-07 20:18:52 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-07 20:18:52 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-07 20:18:52 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-07 20:18:52 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-07 20:18:52 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-07 20:18:52 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-07 20:18:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-07 20:18:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:18:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:18:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:18:52 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-07 20:18:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:18:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:18:53 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-07 20:18:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:18:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-07 20:18:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-07 20:18:53 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-07 20:18:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-07 20:18:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:18:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-07 20:18:53 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-07 20:18:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:18:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:18:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:19:08 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-07 20:19:08 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-07 20:19:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-07 20:19:08 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-07 20:19:08 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-07 20:19:08 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-07 20:19:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:19:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-07 20:19:09 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-07 20:19:09 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-07 20:19:09 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-07 20:19:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-07 20:19:09 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-07 20:19:09 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-07 20:19:09 START begin_task: Starting task 'selecting calibration port' 2009-Apr-07 20:19:09 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-07 20:19:09 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-07 20:19:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-07 20:19:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:19:09 START begin_task: Starting task 'waiting on calport' 2009-Apr-07 20:19:09 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-07 20:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:09 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-07 20:19:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:09 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:19:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-07 20:19:09 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-07 20:19:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-07 20:19:09 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-07 20:19:09 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-07 20:19:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:19:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:19:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:19:09 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-07 20:19:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:19:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:19:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:19:09 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-07 20:19:10 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-07 20:19:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:19:10 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-07 20:19:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:19:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:19:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:19:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:19:10 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:10 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-07 20:19:10 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-07 20:19:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-07 20:19:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:19:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-07 20:19:10 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-07 20:19:10 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-07 20:19:10 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-07 20:19:10 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-07 20:19:10 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-07 20:19:10 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-07 20:19:10 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-07 20:19:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-07 20:19:11 LOG3 track_source: Calling 'track_source galfasrc 085800.0 +202624 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-07 20:19:11 START begin_task: Starting task 'sending tracking commands' 2009-Apr-07 20:19:11 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-07 20:19:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-07 20:19:11 INFO1 track_source: Starting to track galfasrc 2009-Apr-07 20:19:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-07 20:19:11 LOG3 vw_send: To DATATAKING: set ra 085800.0 2009-Apr-07 20:19:11 LOG3 vw_send: To DATATAKING: set dec +202624 2009-Apr-07 20:19:11 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-07 20:19:11 LOG3 vw_send: To DATATAKING: pnt tr 085800.0 +202624 -CJ 2009-Apr-07 20:19:11 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-07 20:19:11 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-07 20:19:11 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-07 20:19:11 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-07 20:19:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:19:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-07 20:19:11 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-07 20:19:11 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-07 20:19:11 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-07 20:19:11 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-07 20:19:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:19:11 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-07 20:19:11 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-07 20:19:11 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-07 20:19:11 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-07 20:19:11 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-07 20:19:11 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-07 20:19:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-07 20:19:11 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-07 20:19:11 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-07 20:19:11 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-07 20:19:11 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-07 20:19:11 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-07 20:19:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:19:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20090407.a2010.0000.fits 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-07 20:19:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-07 20:19:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-07 20:19:11 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090407.a2010.0000.fits} 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: set ra 085800.0 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: set dec +202624 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: vw% 085800.0 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: vw% +202624 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: pnt tr 085800.0 +202624 -CJ 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-07 20:19:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:19:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-07 20:19:44 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-07 20:19:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-07 20:19:44 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-07 20:19:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-07 20:19:44 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-07 20:19:44 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-07 20:19:44 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-07 20:19:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:19:44 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-07 20:19:44 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-07 20:19:44 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-07 20:19:44 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-07 20:19:44 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-07 20:19:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-07 20:19:44 LOG3 waittrk: Start waittrk 5 2009-Apr-07 20:19:44 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-07 20:19:44 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-07 20:19:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-07 20:19:49 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-07 20:19:49 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-07 20:19:49 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-07 20:19:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-07 20:19:49 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-07 20:19:49 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-07 20:19:49 INFO2 waittrk: Now tracking galfasrc 2009-Apr-07 20:19:49 LOG4 waittrk: Current telescope position: Az = 180.79 ZA = 2.06 2009-Apr-07 20:19:49 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-07 20:19:49 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-07 20:19:49 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-07 20:19:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:19:49 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-07 20:19:49 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-07 20:19:49 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-07 20:19:49 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-07 20:19:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-07 20:19:50 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-07 20:19:50 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-07 20:19:50 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-07 20:19:50 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-07 20:19:50 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-07 20:19:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-07 20:19:50 START begin_task: Starting task 'selecting calibration type' 2009-Apr-07 20:19:50 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-07 20:19:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-07 20:19:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-07 20:19:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:19:50 START begin_task: Starting task 'waiting on setcal' 2009-Apr-07 20:19:50 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-07 20:19:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-07 20:19:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:19:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-07 20:19:50 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-07 20:19:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-07 20:19:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:19:50 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-07 20:19:50 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:19:50 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-07 20:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:19:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:19:51 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-07 20:19:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:19:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-07 20:19:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:19:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:19:51 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:19:51 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-07 20:19:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:19:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:19:51 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-07 20:19:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:19:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:19:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-07 20:19:51 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-07 20:19:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:19:51 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090407.a2010.0000.fits' is empty! 2009-Apr-07 20:19:51 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-07 20:19:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-07 20:19:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-07 20:19:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:19:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:19:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:19:51 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-07 20:19:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:19:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:19:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:19:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:19:51 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-07 20:19:52 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-07 20:19:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 20:19:52 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-07 20:19:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-07 20:19:52 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-07 20:19:52 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-07 20:19:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-07 20:19:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:19:52 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-07 20:19:52 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-07 20:19:52 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-07 20:19:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:19:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:19:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-07 20:19:55 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-07 20:19:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-07 20:19:55 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 20:19:55 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-07 20:19:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-07 20:19:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:19:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:19:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:19:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:19:55 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-07 20:19:55 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-07 20:19:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-07 20:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-07 20:19:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-07 20:19:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-07 20:19:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-07 20:19:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-07 20:19:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-07 20:19:55 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-07 20:19:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.994 1.057 ALFA beam 1: 1.013 0.996 2009-Apr-07 20:19:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.952 0.917 ALFA beam 3: 1.006 1.009 2009-Apr-07 20:19:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.998 1.080 ALFA beam 5: 0.986 1.086 2009-Apr-07 20:19:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.046 0.097 ALFA beam 7: 0.937 0.120 2009-Apr-07 20:19:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 20:19:56 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-07 20:19:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-07 20:19:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:19:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 20:19:56 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-07 20:19:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-07 20:19:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 20:19:56 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-07 20:19:56 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-07 20:19:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:19:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 20:19:56 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-07 20:19:56 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-07 20:19:56 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-07 20:19:56 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-07 20:19:56 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:19:56 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:19:56 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:19:56 LOG2 antvel: Parameters to Doppler: Topocentric 87595 2009 97 0.0 2009-Apr-07 20:19:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:19:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-07 20:19:56 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-07 20:19:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:19:56 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:19:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:19:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:19:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-07 20:19:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:19:56 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-07 20:19:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-07 20:19:56 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.975012 2009.2678909359392 18.999933 2009-Apr-07 20:19:56 LOG4 log_alfabeam: ALFABEAM 0 8.966666666664320 20.439999999999973 2009-Apr-07 20:19:56 LOG4 log_alfabeam: ALFABEAM 1 8.967823436549578 20.335176636259309 2009-Apr-07 20:19:56 LOG4 log_alfabeam: ALFABEAM 2 8.972701199536298 20.403232030204116 2009-Apr-07 20:19:56 LOG4 log_alfabeam: ALFABEAM 3 8.971756508327150 20.508573309797864 2009-Apr-07 20:19:56 LOG4 log_alfabeam: ALFABEAM 4 8.965381500468963 20.544677883990193 2009-Apr-07 20:19:56 LOG4 log_alfabeam: ALFABEAM 5 8.960420477595223 20.473085822190988 2009-Apr-07 20:19:56 LOG4 log_alfabeam: ALFABEAM 6 8.961915726093318 20.369062767533972 2009-Apr-07 20:19:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700172 2009-Apr-07 20:19:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:19:56 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-07 20:19:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:19:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:19:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:19:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-07 20:19:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1197.00 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:19:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:19:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.090 1.053 1.023 2009-Apr-07 20:19:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.917 1.006 1.009 2009-Apr-07 20:19:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.055 1.121 1.056 1.144 2009-Apr-07 20:19:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.100 0.962 0.123 2009-Apr-07 20:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.143 (still bad) 2009-Apr-07 20:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.143 (still bad) 2009-Apr-07 20:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.149 (still bad) 2009-Apr-07 20:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.147 (still bad) 2009-Apr-07 20:20:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:20:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:20:07 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-07 20:20:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:20:07 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-07 20:20:07 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-07 20:20:07 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-07 20:20:07 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-07 20:20:07 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:20:07 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:20:07 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:20:07 LOG2 antvel: Parameters to Doppler: Topocentric 87607 2009 97 0.0 2009-Apr-07 20:20:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:20:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-07 20:20:07 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-07 20:20:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:20:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:20:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:20:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-07 20:20:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:20:07 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-07 20:20:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-07 20:20:07 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.978355 2009.2678913161965 18.999933 2009-Apr-07 20:20:07 LOG4 log_alfabeam: ALFABEAM 0 8.966666666668363 20.440000000000026 2009-Apr-07 20:20:07 LOG4 log_alfabeam: ALFABEAM 1 8.967996168993322 20.335582377284787 2009-Apr-07 20:20:07 LOG4 log_alfabeam: ALFABEAM 2 8.972760351619396 20.405211530489822 2009-Apr-07 20:20:07 LOG4 log_alfabeam: ALFABEAM 3 8.971641809937974 20.510216013607913 2009-Apr-07 20:20:07 LOG4 log_alfabeam: ALFABEAM 4 8.965208835674408 20.544230279834022 2009-Apr-07 20:20:07 LOG4 log_alfabeam: ALFABEAM 5 8.960367559121927 20.471038954143932 2009-Apr-07 20:20:07 LOG4 log_alfabeam: ALFABEAM 6 8.962034117161380 20.367531706007487 2009-Apr-07 20:20:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700173 2009-Apr-07 20:20:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:20:08 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-07 20:20:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:20:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:20:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-07 20:20:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1209.00 2009-Apr-07 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.144 (still bad) 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:20:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:20:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:20:19 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-07 20:20:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:20:19 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-07 20:20:19 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-07 20:20:19 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-07 20:20:19 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-07 20:20:19 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:20:19 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:20:19 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:20:19 LOG2 antvel: Parameters to Doppler: Topocentric 87619 2009 97 0.0 2009-Apr-07 20:20:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:20:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-07 20:20:19 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-07 20:20:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:20:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:20:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:20:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-07 20:20:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:20:19 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-07 20:20:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-07 20:20:19 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.981697 2009.2678916964535 18.999933 2009-Apr-07 20:20:19 LOG4 log_alfabeam: ALFABEAM 0 8.966666666667077 20.440000000000001 2009-Apr-07 20:20:19 LOG4 log_alfabeam: ALFABEAM 1 8.968168013235607 20.336043847567904 2009-Apr-07 20:20:19 LOG4 log_alfabeam: ALFABEAM 2 8.972816208821193 20.407208362050522 2009-Apr-07 20:20:19 LOG4 log_alfabeam: ALFABEAM 3 8.971524477739505 20.511819532005465 2009-Apr-07 20:20:19 LOG4 log_alfabeam: ALFABEAM 4 8.965037198035610 20.543727158503323 2009-Apr-07 20:20:19 LOG4 log_alfabeam: ALFABEAM 5 8.960318145064686 20.468978898998149 2009-Apr-07 20:20:19 LOG4 log_alfabeam: ALFABEAM 6 8.962154763022204 20.366041969110675 2009-Apr-07 20:20:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700174 2009-Apr-07 20:20:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:20:20 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-07 20:20:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:20:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:20:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-07 20:20:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1221.00 2009-Apr-07 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:20:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:20:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:20:31 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-07 20:20:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:20:31 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-07 20:20:31 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-07 20:20:31 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-07 20:20:31 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-07 20:20:31 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:20:31 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:20:31 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:20:31 LOG2 antvel: Parameters to Doppler: Topocentric 87631 2009 97 0.0 2009-Apr-07 20:20:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:20:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-07 20:20:31 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-07 20:20:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:20:31 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:20:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:20:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-07 20:20:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:20:31 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-07 20:20:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-07 20:20:31 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.985040 2009.2678920767105 18.999933 2009-Apr-07 20:20:31 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666750 20.440000000000001 2009-Apr-07 20:20:31 LOG4 log_alfabeam: ALFABEAM 1 8.968338801924606 20.336560382232612 2009-Apr-07 20:20:31 LOG4 log_alfabeam: ALFABEAM 2 8.972868724565135 20.409220515706366 2009-Apr-07 20:20:31 LOG4 log_alfabeam: ALFABEAM 3 8.971404636928117 20.513382347174243 2009-Apr-07 20:20:31 LOG4 log_alfabeam: ALFABEAM 4 8.964866753788488 20.543169291637550 2009-Apr-07 20:20:31 LOG4 log_alfabeam: ALFABEAM 5 8.960272264310115 20.466907811464463 2009-Apr-07 20:20:31 LOG4 log_alfabeam: ALFABEAM 6 8.962277531553790 20.364594771364359 2009-Apr-07 20:20:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700175 2009-Apr-07 20:20:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:20:32 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-07 20:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:20:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:20:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:20:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-07 20:20:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1233.00 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:20:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:20:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:20:43 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-07 20:20:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:20:43 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-07 20:20:43 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-07 20:20:43 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-07 20:20:43 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-07 20:20:43 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:20:43 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:20:43 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:20:43 LOG2 antvel: Parameters to Doppler: Topocentric 87643 2009 97 0.0 2009-Apr-07 20:20:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:20:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-07 20:20:43 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-07 20:20:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:20:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:20:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:20:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-07 20:20:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:20:43 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-07 20:20:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-07 20:20:43 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.988382 2009.2678924569675 18.999933 2009-Apr-07 20:20:43 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666791 20.440000000000001 2009-Apr-07 20:20:43 LOG4 log_alfabeam: ALFABEAM 1 8.968508169516889 20.337130477079697 2009-Apr-07 20:20:43 LOG4 log_alfabeam: ALFABEAM 2 8.972917803948844 20.411243530632110 2009-Apr-07 20:20:43 LOG4 log_alfabeam: ALFABEAM 3 8.971282565388940 20.514901255795731 2009-Apr-07 20:20:43 LOG4 log_alfabeam: ALFABEAM 4 8.964697866152981 20.542558336669448 2009-Apr-07 20:20:43 LOG4 log_alfabeam: ALFABEAM 5 8.960229985492987 20.464830342197370 2009-Apr-07 20:20:43 LOG4 log_alfabeam: ALFABEAM 6 8.962402136726947 20.363192867173282 2009-Apr-07 20:20:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700176 2009-Apr-07 20:20:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:20:44 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-07 20:20:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:20:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:20:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:20:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-07 20:20:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1245.00 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-07 20:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-07 20:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.106 (still bad) 2009-Apr-07 20:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-07 20:20:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:20:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:20:55 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-07 20:20:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:20:55 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-07 20:20:55 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-07 20:20:55 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-07 20:20:55 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-07 20:20:55 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:20:55 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:20:55 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:20:55 LOG2 antvel: Parameters to Doppler: Topocentric 87655 2009 97 0.0 2009-Apr-07 20:20:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:20:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-07 20:20:55 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-07 20:20:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:20:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:20:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:20:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-07 20:20:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:20:55 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-07 20:20:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-07 20:20:55 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.991725 2009.2678928372245 18.999933 2009-Apr-07 20:20:55 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666750 20.440000000000008 2009-Apr-07 20:20:55 LOG4 log_alfabeam: ALFABEAM 1 8.968675962632405 20.337753035448280 2009-Apr-07 20:20:55 LOG4 log_alfabeam: ALFABEAM 2 8.972963429190949 20.413275331230999 2009-Apr-07 20:20:55 LOG4 log_alfabeam: ALFABEAM 3 8.971158405443642 20.516375121666872 2009-Apr-07 20:20:55 LOG4 log_alfabeam: ALFABEAM 4 8.964530685851178 20.541895489920254 2009-Apr-07 20:20:55 LOG4 log_alfabeam: ALFABEAM 5 8.960191307181862 20.462748658831483 2009-Apr-07 20:20:55 LOG4 log_alfabeam: ALFABEAM 6 8.962528433898539 20.361837078456144 2009-Apr-07 20:20:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700177 2009-Apr-07 20:20:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:20:56 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-07 20:20:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:20:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:20:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:20:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:20:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-07 20:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-07 20:20:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1257.00 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-07 20:21:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:21:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.057 1.013 1.001 2009-Apr-07 20:21:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.918 1.012 1.023 2009-Apr-07 20:21:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.103 0.979 1.097 2009-Apr-07 20:21:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.950 0.123 2009-Apr-07 20:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-07 20:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-07 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-07 20:21:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:21:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:21:07 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-07 20:21:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:21:07 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-07 20:21:07 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-07 20:21:07 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-07 20:21:07 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-07 20:21:07 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:21:07 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:21:07 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:21:07 LOG2 antvel: Parameters to Doppler: Topocentric 87667 2009 97 0.0 2009-Apr-07 20:21:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:21:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-07 20:21:07 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-07 20:21:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:21:07 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:21:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:21:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-07 20:21:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:21:07 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-07 20:21:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-07 20:21:07 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.995067 2009.2678932174817 18.999933 2009-Apr-07 20:21:07 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666674 20.440000000000001 2009-Apr-07 20:21:07 LOG4 log_alfabeam: ALFABEAM 1 8.968841836839795 20.338426020943807 2009-Apr-07 20:21:07 LOG4 log_alfabeam: ALFABEAM 2 8.973005542559221 20.415311415300501 2009-Apr-07 20:21:07 LOG4 log_alfabeam: ALFABEAM 3 8.971032453912095 20.517801255343048 2009-Apr-07 20:21:07 LOG4 log_alfabeam: ALFABEAM 4 8.964365553217714 20.541182930289189 2009-Apr-07 20:21:07 LOG4 log_alfabeam: ALFABEAM 5 8.960156259195834 20.460667387219353 2009-Apr-07 20:21:07 LOG4 log_alfabeam: ALFABEAM 6 8.962656123686259 20.360529639548858 2009-Apr-07 20:21:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700178 2009-Apr-07 20:21:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:21:08 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-07 20:21:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:21:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:21:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-07 20:21:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1269.00 2009-Apr-07 20:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-07 20:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.103 (still bad) 2009-Apr-07 20:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.104 (still bad) 2009-Apr-07 20:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-07 20:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-07 20:21:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:21:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:21:19 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-07 20:21:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:21:19 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-07 20:21:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-07 20:21:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-07 20:21:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-07 20:21:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:21:19 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-07 20:21:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:21:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-07 20:21:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:21:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:21:19 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-07 20:21:19 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-07 20:21:19 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-07 20:21:19 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-07 20:21:19 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:21:19 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:21:19 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:21:19 LOG2 antvel: Parameters to Doppler: Topocentric 87679 2009 97 0.0 2009-Apr-07 20:21:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:21:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-07 20:21:19 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-07 20:21:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:21:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:21:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:21:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-07 20:21:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:21:19 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-07 20:21:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-07 20:21:19 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 8.998410 2009.2678935977387 18.999933 2009-Apr-07 20:21:19 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666654 20.440000000000005 2009-Apr-07 20:21:19 LOG4 log_alfabeam: ALFABEAM 1 8.969005659543347 20.339147962966194 2009-Apr-07 20:21:19 LOG4 log_alfabeam: ALFABEAM 2 8.973044155361134 20.417349737428683 2009-Apr-07 20:21:19 LOG4 log_alfabeam: ALFABEAM 3 8.970904863389638 20.519178948065932 2009-Apr-07 20:21:19 LOG4 log_alfabeam: ALFABEAM 4 8.964202596834046 20.540422216376466 2009-Apr-07 20:21:19 LOG4 log_alfabeam: ALFABEAM 5 8.960124810418597 20.458588608515527 2009-Apr-07 20:21:19 LOG4 log_alfabeam: ALFABEAM 6 8.962785055758147 20.359270949306623 2009-Apr-07 20:21:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700179 2009-Apr-07 20:21:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:21:20 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-07 20:21:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:21:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:21:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-07 20:21:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1281.00 2009-Apr-07 20:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.584 (still bad) 2009-Apr-07 20:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.583 (still bad) 2009-Apr-07 20:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.583 (still bad) 2009-Apr-07 20:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.586 (still bad) 2009-Apr-07 20:21:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.582 (still bad) 2009-Apr-07 20:21:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:21:31 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-07 20:21:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:21:31 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-07 20:21:31 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-07 20:21:31 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-07 20:21:31 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-07 20:21:31 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:21:31 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:21:31 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:21:31 LOG2 antvel: Parameters to Doppler: Topocentric 87691 2009 97 0.0 2009-Apr-07 20:21:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:21:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-07 20:21:31 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-07 20:21:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:21:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:21:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:21:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-07 20:21:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:21:31 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-07 20:21:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-07 20:21:31 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.001752 2009.2678939779958 18.999933 2009-Apr-07 20:21:31 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666729 20.439999999999994 2009-Apr-07 20:21:31 LOG4 log_alfabeam: ALFABEAM 1 8.969167114727295 20.339916368586355 2009-Apr-07 20:21:31 LOG4 log_alfabeam: ALFABEAM 2 8.973079246839511 20.419385864450934 2009-Apr-07 20:21:31 LOG4 log_alfabeam: ALFABEAM 3 8.970775941496976 20.520506066104268 2009-Apr-07 20:21:31 LOG4 log_alfabeam: ALFABEAM 4 8.964042127077915 20.539615968218136 2009-Apr-07 20:21:31 LOG4 log_alfabeam: ALFABEAM 5 8.960096953276958 20.456516812010761 2009-Apr-07 20:21:31 LOG4 log_alfabeam: ALFABEAM 6 8.962914925340574 20.358062696988085 2009-Apr-07 20:21:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700180 2009-Apr-07 20:21:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:21:32 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-07 20:21:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:21:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:21:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-07 20:21:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1293.00 2009-Apr-07 20:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.582 (still bad) 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.583 (still bad) 2009-Apr-07 20:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.584 (still bad) 2009-Apr-07 20:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.583 (still bad) 2009-Apr-07 20:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.588 (still bad) 2009-Apr-07 20:21:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:21:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:21:43 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-07 20:21:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:21:43 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-07 20:21:43 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-07 20:21:43 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-07 20:21:43 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-07 20:21:43 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:21:43 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:21:43 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:21:43 LOG2 antvel: Parameters to Doppler: Topocentric 87703 2009 97 0.0 2009-Apr-07 20:21:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:21:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-07 20:21:43 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-07 20:21:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:21:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:21:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:21:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-07 20:21:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:21:43 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-07 20:21:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-07 20:21:43 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.005095 2009.2678943582528 18.999933 2009-Apr-07 20:21:43 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666743 20.440000000000001 2009-Apr-07 20:21:43 LOG4 log_alfabeam: ALFABEAM 1 8.969326095958886 20.340729469334601 2009-Apr-07 20:21:43 LOG4 log_alfabeam: ALFABEAM 2 8.973110856068949 20.421417872294274 2009-Apr-07 20:21:43 LOG4 log_alfabeam: ALFABEAM 3 8.970645843949054 20.521782348453034 2009-Apr-07 20:21:43 LOG4 log_alfabeam: ALFABEAM 4 8.963884245261140 20.538766027048521 2009-Apr-07 20:21:43 LOG4 log_alfabeam: ALFABEAM 5 8.960072629200686 20.454453902193418 2009-Apr-07 20:21:43 LOG4 log_alfabeam: ALFABEAM 6 8.963045583245767 20.356904852386865 2009-Apr-07 20:21:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700181 2009-Apr-07 20:21:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:21:44 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-07 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.583 (still bad) 2009-Apr-07 20:21:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:21:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:21:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-07 20:21:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1305.00 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.583 (still bad) 2009-Apr-07 20:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2009-Apr-07 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.580 (still bad) 2009-Apr-07 20:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.580 (still bad) 2009-Apr-07 20:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.581 (still bad) 2009-Apr-07 20:21:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:21:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:21:55 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-07 20:21:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:21:55 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-07 20:21:55 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-07 20:21:55 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-07 20:21:55 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-07 20:21:55 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:21:55 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26789 J 2009-Apr-07 20:21:55 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:21:55 LOG2 antvel: Parameters to Doppler: Topocentric 87715 2009 97 0.0 2009-Apr-07 20:21:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:21:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-07 20:21:55 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-07 20:21:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:21:55 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:21:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:21:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-07 20:21:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:21:55 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-07 20:21:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-07 20:21:55 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.008437 2009.2678947385098 18.999933 2009-Apr-07 20:21:55 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666736 20.440000000000001 2009-Apr-07 20:21:55 LOG4 log_alfabeam: ALFABEAM 1 8.969482321222618 20.341584408218541 2009-Apr-07 20:21:55 LOG4 log_alfabeam: ALFABEAM 2 8.973138997243172 20.423441498120003 2009-Apr-07 20:21:55 LOG4 log_alfabeam: ALFABEAM 3 8.970514880969937 20.523006230821050 2009-Apr-07 20:21:55 LOG4 log_alfabeam: ALFABEAM 4 8.963729226525324 20.537875358087998 2009-Apr-07 20:21:55 LOG4 log_alfabeam: ALFABEAM 5 8.960051796285461 20.452404133093442 2009-Apr-07 20:21:55 LOG4 log_alfabeam: ALFABEAM 6 8.963176727036268 20.355798561064734 2009-Apr-07 20:21:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700182 2009-Apr-07 20:21:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:21:56 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-07 20:21:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:21:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:21:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.578 (still bad) 2009-Apr-07 20:21:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-07 20:21:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1317.00 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.578 (still bad) 2009-Apr-07 20:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.577 (still bad) 2009-Apr-07 20:22:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:22:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.407 1.466 1.411 1.380 2009-Apr-07 20:22:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.336 1.292 1.446 1.425 2009-Apr-07 20:22:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.455 1.571 1.417 1.488 2009-Apr-07 20:22:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.539 0.100 1.371 0.123 2009-Apr-07 20:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.569 (still bad) 2009-Apr-07 20:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2009-Apr-07 20:22:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:22:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:22:07 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-07 20:22:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:22:07 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-07 20:22:07 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-07 20:22:07 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-07 20:22:07 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-07 20:22:07 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:22:07 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:22:07 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:22:07 LOG2 antvel: Parameters to Doppler: Topocentric 87727 2009 97 0.0 2009-Apr-07 20:22:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:22:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-07 20:22:07 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-07 20:22:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:22:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:22:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:22:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-07 20:22:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:22:07 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-07 20:22:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-07 20:22:07 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.011779 2009.267895118767 18.999933 2009-Apr-07 20:22:07 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666653 20.439999999999994 2009-Apr-07 20:22:07 LOG4 log_alfabeam: ALFABEAM 1 8.969635668470112 20.342478933005061 2009-Apr-07 20:22:07 LOG4 log_alfabeam: ALFABEAM 2 8.973163727623598 20.425454418150100 2009-Apr-07 20:22:07 LOG4 log_alfabeam: ALFABEAM 3 8.970383243957381 20.524177552373676 2009-Apr-07 20:22:07 LOG4 log_alfabeam: ALFABEAM 4 8.963577186590886 20.536946278897453 2009-Apr-07 20:22:07 LOG4 log_alfabeam: ALFABEAM 5 8.960034376772125 20.450369763680822 2009-Apr-07 20:22:07 LOG4 log_alfabeam: ALFABEAM 6 8.963308175650294 20.354743688795757 2009-Apr-07 20:22:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700183 2009-Apr-07 20:22:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:22:08 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-07 20:22:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:22:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:22:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-07 20:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.574 (still bad) 2009-Apr-07 20:22:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1329.00 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.561 (still bad) 2009-Apr-07 20:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.561 (still bad) 2009-Apr-07 20:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.562 (still bad) 2009-Apr-07 20:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Apr-07 20:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.563 (still bad) 2009-Apr-07 20:22:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:22:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:22:19 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-07 20:22:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:22:19 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-07 20:22:19 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-07 20:22:19 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-07 20:22:19 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-07 20:22:19 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:22:19 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:22:19 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:22:19 LOG2 antvel: Parameters to Doppler: Topocentric 87739 2009 97 0.0 2009-Apr-07 20:22:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:22:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-07 20:22:19 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-07 20:22:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:22:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:22:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:22:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-07 20:22:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:22:19 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-07 20:22:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-07 20:22:19 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.015122 2009.267895499024 18.999933 2009-Apr-07 20:22:19 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666690 20.440000000000001 2009-Apr-07 20:22:19 LOG4 log_alfabeam: ALFABEAM 1 8.969786029640479 20.343410744266254 2009-Apr-07 20:22:19 LOG4 log_alfabeam: ALFABEAM 2 8.973185113607856 20.427454427306891 2009-Apr-07 20:22:19 LOG4 log_alfabeam: ALFABEAM 3 8.970251119637341 20.525296333059817 2009-Apr-07 20:22:19 LOG4 log_alfabeam: ALFABEAM 4 8.963428226971747 20.535981145662475 2009-Apr-07 20:22:19 LOG4 log_alfabeam: ALFABEAM 5 8.960020284639313 20.448352914088744 2009-Apr-07 20:22:19 LOG4 log_alfabeam: ALFABEAM 6 8.963439754055557 20.353739938900624 2009-Apr-07 20:22:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700184 2009-Apr-07 20:22:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:22:20 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-07 20:22:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:22:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:22:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-07 20:22:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1341.00 2009-Apr-07 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-07 20:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2009-Apr-07 20:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-07 20:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-07 20:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.561 (still bad) 2009-Apr-07 20:22:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:22:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:22:31 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-07 20:22:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:22:31 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-07 20:22:31 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-07 20:22:31 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-07 20:22:31 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-07 20:22:31 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:22:31 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:22:31 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:22:31 LOG2 antvel: Parameters to Doppler: Topocentric 87751 2009 97 0.0 2009-Apr-07 20:22:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:22:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-07 20:22:31 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-07 20:22:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:22:31 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:22:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:22:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-07 20:22:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:22:31 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-07 20:22:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-07 20:22:31 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.018464 2009.267895879281 18.999933 2009-Apr-07 20:22:31 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666702 20.440000000000008 2009-Apr-07 20:22:31 LOG4 log_alfabeam: ALFABEAM 1 8.969933179918286 20.344376630242461 2009-Apr-07 20:22:31 LOG4 log_alfabeam: ALFABEAM 2 8.973203215038767 20.429437673877146 2009-Apr-07 20:22:31 LOG4 log_alfabeam: ALFABEAM 3 8.970118807983830 20.526361831065174 2009-Apr-07 20:22:31 LOG4 log_alfabeam: ALFABEAM 4 8.963282564409628 20.534983246507860 2009-Apr-07 20:22:31 LOG4 log_alfabeam: ALFABEAM 5 8.960009434913083 20.446357341843061 2009-Apr-07 20:22:31 LOG4 log_alfabeam: ALFABEAM 6 8.963571176108273 20.352787695139405 2009-Apr-07 20:22:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700185 2009-Apr-07 20:22:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:22:32 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-07 20:22:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:22:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:22:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-07 20:22:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1353.00 2009-Apr-07 20:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.561 (still bad) 2009-Apr-07 20:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2009-Apr-07 20:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.559 (still bad) 2009-Apr-07 20:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2009-Apr-07 20:22:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.561 (still bad) 2009-Apr-07 20:22:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:22:43 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-07 20:22:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:22:43 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-07 20:22:43 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-07 20:22:43 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-07 20:22:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-07 20:22:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:22:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:22:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:22:43 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-07 20:22:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:22:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:22:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:22:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:22:43 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-07 20:22:43 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-07 20:22:43 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-07 20:22:43 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-07 20:22:43 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-07 20:22:43 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:22:43 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:22:43 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:22:43 LOG2 antvel: Parameters to Doppler: Topocentric 87763 2009 97 0.0 2009-Apr-07 20:22:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:22:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-07 20:22:43 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-07 20:22:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:22:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:22:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:22:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-07 20:22:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:22:43 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-07 20:22:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-07 20:22:44 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.021807 2009.267896259538 18.999933 2009-Apr-07 20:22:44 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666717 20.440000000000008 2009-Apr-07 20:22:44 LOG4 log_alfabeam: ALFABEAM 1 8.970077090306017 20.345374467199395 2009-Apr-07 20:22:44 LOG4 log_alfabeam: ALFABEAM 2 8.973218126377656 20.431402847697289 2009-Apr-07 20:22:44 LOG4 log_alfabeam: ALFABEAM 3 8.969986444000799 20.527374834484053 2009-Apr-07 20:22:44 LOG4 log_alfabeam: ALFABEAM 4 8.963140221383528 20.533954732347578 2009-Apr-07 20:22:44 LOG4 log_alfabeam: ALFABEAM 5 8.960001717879198 20.444384224067708 2009-Apr-07 20:22:44 LOG4 log_alfabeam: ALFABEAM 6 8.963702321155500 20.351885971189645 2009-Apr-07 20:22:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700186 2009-Apr-07 20:22:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:22:44 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-07 20:22:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:22:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:22:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-07 20:22:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1365.00 2009-Apr-07 20:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.146 (still bad) 2009-Apr-07 20:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.144 (still bad) 2009-Apr-07 20:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.144 (still bad) 2009-Apr-07 20:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.149 (still bad) 2009-Apr-07 20:22:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:22:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:22:55 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-07 20:22:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:22:55 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-07 20:22:55 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-07 20:22:55 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-07 20:22:55 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-07 20:22:55 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:22:55 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:22:55 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:22:55 LOG2 antvel: Parameters to Doppler: Topocentric 87775 2009 97 0.0 2009-Apr-07 20:22:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:22:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-07 20:22:55 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-07 20:22:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:22:55 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:22:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:22:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-07 20:22:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:22:55 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-07 20:22:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-07 20:22:55 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.025149 2009.267896639795 18.999933 2009-Apr-07 20:22:55 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666690 20.440000000000001 2009-Apr-07 20:22:55 LOG4 log_alfabeam: ALFABEAM 1 8.970217575429043 20.346400933998087 2009-Apr-07 20:22:55 LOG4 log_alfabeam: ALFABEAM 2 8.973229932030435 20.433346446189859 2009-Apr-07 20:22:55 LOG4 log_alfabeam: ALFABEAM 3 8.969854312902497 20.528335097142207 2009-Apr-07 20:22:55 LOG4 log_alfabeam: ALFABEAM 4 8.963001374834997 20.532898979036307 2009-Apr-07 20:22:55 LOG4 log_alfabeam: ALFABEAM 5 8.959997026542542 20.442436923580829 2009-Apr-07 20:22:55 LOG4 log_alfabeam: ALFABEAM 6 8.963832920741114 20.351034705248921 2009-Apr-07 20:22:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700187 2009-Apr-07 20:22:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:22:56 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-07 20:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.143 (still bad) 2009-Apr-07 20:22:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:22:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:22:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:22:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-07 20:22:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1377.00 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:23:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:23:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 1.085 1.042 1.017 2009-Apr-07 20:23:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.934 1.051 1.038 2009-Apr-07 20:23:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.128 1.030 1.130 2009-Apr-07 20:23:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.100 0.968 0.123 2009-Apr-07 20:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:23:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:23:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:23:07 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-07 20:23:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:23:07 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-07 20:23:07 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-07 20:23:07 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-07 20:23:07 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-07 20:23:07 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:23:07 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:23:07 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:23:07 LOG2 antvel: Parameters to Doppler: Topocentric 87787 2009 97 0.0 2009-Apr-07 20:23:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:23:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-07 20:23:07 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-07 20:23:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:23:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:23:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:23:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-07 20:23:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:23:07 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-07 20:23:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-07 20:23:07 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.028492 2009.2678970200523 18.999933 2009-Apr-07 20:23:07 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666692 20.440000000000008 2009-Apr-07 20:23:07 LOG4 log_alfabeam: ALFABEAM 1 8.970354637475806 20.347453917877854 2009-Apr-07 20:23:07 LOG4 log_alfabeam: ALFABEAM 2 8.973238740902204 20.435267481348543 2009-Apr-07 20:23:07 LOG4 log_alfabeam: ALFABEAM 3 8.969722532572302 20.529243748336871 2009-Apr-07 20:23:07 LOG4 log_alfabeam: ALFABEAM 4 8.962866016043945 20.531818108507810 2009-Apr-07 20:23:07 LOG4 log_alfabeam: ALFABEAM 5 8.959995239353036 20.440516265240237 2009-Apr-07 20:23:07 LOG4 log_alfabeam: ALFABEAM 6 8.963962873029210 20.350232616987487 2009-Apr-07 20:23:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700188 2009-Apr-07 20:23:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:23:08 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-07 20:23:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:23:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:23:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:23:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-07 20:23:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1389.00 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:23:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:23:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:23:19 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-07 20:23:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:23:19 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-07 20:23:19 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-07 20:23:19 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-07 20:23:19 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-07 20:23:19 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:23:19 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:23:19 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:23:19 LOG2 antvel: Parameters to Doppler: Topocentric 87799 2009 97 0.0 2009-Apr-07 20:23:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:23:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-07 20:23:19 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-07 20:23:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:23:19 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:23:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:23:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-07 20:23:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:23:19 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-07 20:23:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-07 20:23:19 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.031834 2009.2678974003093 18.999933 2009-Apr-07 20:23:19 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666661 20.440000000000001 2009-Apr-07 20:23:19 LOG4 log_alfabeam: ALFABEAM 1 8.970488129542762 20.348530081338929 2009-Apr-07 20:23:19 LOG4 log_alfabeam: ALFABEAM 2 8.973244656728292 20.437162835179649 2009-Apr-07 20:23:19 LOG4 log_alfabeam: ALFABEAM 3 8.969591368683345 20.530100977315907 2009-Apr-07 20:23:19 LOG4 log_alfabeam: ALFABEAM 4 8.962734283442268 20.530715492355764 2009-Apr-07 20:23:19 LOG4 log_alfabeam: ALFABEAM 5 8.959996232932690 20.438625192160618 2009-Apr-07 20:23:19 LOG4 log_alfabeam: ALFABEAM 6 8.964091931108426 20.349479262781614 2009-Apr-07 20:23:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700189 2009-Apr-07 20:23:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:23:20 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-07 20:23:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:23:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:23:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-07 20:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:23:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1401.00 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:23:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:23:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:23:31 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-07 20:23:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:23:31 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-07 20:23:31 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-07 20:23:31 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-07 20:23:31 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-07 20:23:31 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:23:31 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:23:31 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:23:31 LOG2 antvel: Parameters to Doppler: Topocentric 87811 2009 97 0.0 2009-Apr-07 20:23:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:23:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-07 20:23:31 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-07 20:23:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:23:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:23:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:23:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-07 20:23:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:23:31 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-07 20:23:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-07 20:23:31 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.035177 2009.2678977805663 18.999933 2009-Apr-07 20:23:31 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666706 20.439999999999994 2009-Apr-07 20:23:31 LOG4 log_alfabeam: ALFABEAM 1 8.970618082910804 20.349627396739749 2009-Apr-07 20:23:31 LOG4 log_alfabeam: ALFABEAM 2 8.973247798051965 20.439031856738513 2009-Apr-07 20:23:31 LOG4 log_alfabeam: ALFABEAM 3 8.969460918879733 20.530908191862245 2009-Apr-07 20:23:31 LOG4 log_alfabeam: ALFABEAM 4 8.962606139466919 20.529593151016076 2009-Apr-07 20:23:31 LOG4 log_alfabeam: ALFABEAM 5 8.959999878918243 20.436764171888409 2009-Apr-07 20:23:31 LOG4 log_alfabeam: ALFABEAM 6 8.964220014249262 20.348773131824174 2009-Apr-07 20:23:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700190 2009-Apr-07 20:23:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:23:32 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-07 20:23:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:23:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:23:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-07 20:23:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1413.00 2009-Apr-07 20:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-07 20:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:23:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:23:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:23:43 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-07 20:23:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:23:43 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-07 20:23:43 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-07 20:23:43 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-07 20:23:43 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-07 20:23:43 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:23:43 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:23:43 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:23:43 LOG2 antvel: Parameters to Doppler: Topocentric 87823 2009 97 0.0 2009-Apr-07 20:23:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:23:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-07 20:23:43 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-07 20:23:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:23:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:23:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:23:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-07 20:23:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:23:43 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-07 20:23:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-07 20:23:43 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.038519 2009.2678981608233 18.999933 2009-Apr-07 20:23:43 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666683 20.440000000000005 2009-Apr-07 20:23:43 LOG4 log_alfabeam: ALFABEAM 1 8.970744386805810 20.350742590606952 2009-Apr-07 20:23:43 LOG4 log_alfabeam: ALFABEAM 2 8.973248282680730 20.440871828013670 2009-Apr-07 20:23:43 LOG4 log_alfabeam: ALFABEAM 3 8.969331425959842 20.531665947690119 2009-Apr-07 20:23:43 LOG4 log_alfabeam: ALFABEAM 4 8.962481686654442 20.528454373333208 2009-Apr-07 20:23:43 LOG4 log_alfabeam: ALFABEAM 5 8.960006043000392 20.434935723015474 2009-Apr-07 20:23:43 LOG4 log_alfabeam: ALFABEAM 6 8.964346899537723 20.348113467917589 2009-Apr-07 20:23:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700191 2009-Apr-07 20:23:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:23:44 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-07 20:23:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:23:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:23:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-07 20:23:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1425.00 2009-Apr-07 20:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:23:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:23:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:23:55 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-07 20:23:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:23:55 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-07 20:23:55 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-07 20:23:55 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-07 20:23:55 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-07 20:23:55 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:23:55 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:23:55 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:23:55 LOG2 antvel: Parameters to Doppler: Topocentric 87835 2009 97 0.0 2009-Apr-07 20:23:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:23:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-07 20:23:55 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-07 20:23:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:23:55 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:23:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:23:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-07 20:23:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:23:55 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-07 20:23:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-07 20:23:55 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.041862 2009.2678985410805 18.999933 2009-Apr-07 20:23:55 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666686 20.439999999999991 2009-Apr-07 20:23:55 LOG4 log_alfabeam: ALFABEAM 1 8.970867098478546 20.351873780669962 2009-Apr-07 20:23:55 LOG4 log_alfabeam: ALFABEAM 2 8.973246234197230 20.442682432826011 2009-Apr-07 20:23:55 LOG4 log_alfabeam: ALFABEAM 3 8.969202965549318 20.532375864125299 2009-Apr-07 20:23:55 LOG4 log_alfabeam: ALFABEAM 4 8.962360861931124 20.527301020261902 2009-Apr-07 20:23:55 LOG4 log_alfabeam: ALFABEAM 5 8.960014594632376 20.433139967536682 2009-Apr-07 20:23:55 LOG4 log_alfabeam: ALFABEAM 6 8.964472528378863 20.347498594811590 2009-Apr-07 20:23:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700192 2009-Apr-07 20:23:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:23:56 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-07 20:23:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:23:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:23:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:23:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:23:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-07 20:23:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1437.00 2009-Apr-07 20:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-07 20:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-07 20:24:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-07 20:24:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.981 1.055 0.994 0.988 2009-Apr-07 20:24:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.916 1.000 1.017 2009-Apr-07 20:24:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.003 1.108 0.965 1.093 2009-Apr-07 20:24:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.099 0.950 0.123 2009-Apr-07 20:24:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:24:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:24:07 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-07 20:24:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:24:07 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-07 20:24:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-07 20:24:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-07 20:24:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-07 20:24:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:24:07 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-07 20:24:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:24:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-07 20:24:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:24:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:24:07 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-07 20:24:07 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-07 20:24:07 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-07 20:24:07 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-07 20:24:07 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:24:07 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:24:07 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:24:07 LOG2 antvel: Parameters to Doppler: Topocentric 87847 2009 97 0.0 2009-Apr-07 20:24:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:24:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-07 20:24:07 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-07 20:24:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:24:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:24:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:24:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-07 20:24:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:24:07 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-07 20:24:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-07 20:24:07 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.045204 2009.2678989213375 18.999933 2009-Apr-07 20:24:07 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666683 20.440000000000001 2009-Apr-07 20:24:07 LOG4 log_alfabeam: ALFABEAM 1 8.970986139945930 20.353017822658646 2009-Apr-07 20:24:07 LOG4 log_alfabeam: ALFABEAM 2 8.973241779515412 20.444461350999653 2009-Apr-07 20:24:07 LOG4 log_alfabeam: ALFABEAM 3 8.969075755637421 20.533038791255148 2009-Apr-07 20:24:07 LOG4 log_alfabeam: ALFABEAM 4 8.962243735491432 20.526136235198969 2009-Apr-07 20:24:07 LOG4 log_alfabeam: ALFABEAM 5 8.960025393548925 20.431379011619736 2009-Apr-07 20:24:07 LOG4 log_alfabeam: ALFABEAM 6 8.964596703006837 20.346927513465936 2009-Apr-07 20:24:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700193 2009-Apr-07 20:24:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:24:08 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-07 20:24:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:24:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-07 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-07 20:24:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-07 20:24:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1449.00 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.490 (still bad) 2009-Apr-07 20:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.589 (still bad) 2009-Apr-07 20:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.586 (still bad) 2009-Apr-07 20:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.587 (still bad) 2009-Apr-07 20:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.594 (still bad) 2009-Apr-07 20:24:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:24:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:24:19 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-07 20:24:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:24:19 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-07 20:24:19 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-07 20:24:19 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-07 20:24:19 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-07 20:24:19 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:24:19 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:24:19 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:24:19 LOG2 antvel: Parameters to Doppler: Topocentric 87859 2009 97 0.0 2009-Apr-07 20:24:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:24:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-07 20:24:19 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-07 20:24:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:24:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:24:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:24:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-07 20:24:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:24:19 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-07 20:24:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-07 20:24:19 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.048546 2009.2678993015945 18.999933 2009-Apr-07 20:24:19 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666676 20.440000000000001 2009-Apr-07 20:24:19 LOG4 log_alfabeam: ALFABEAM 1 8.971101556648206 20.354172677711762 2009-Apr-07 20:24:19 LOG4 log_alfabeam: ALFABEAM 2 8.973235045458086 20.446208066893828 2009-Apr-07 20:24:19 LOG4 log_alfabeam: ALFABEAM 3 8.968949886727341 20.533656315524475 2009-Apr-07 20:24:19 LOG4 log_alfabeam: ALFABEAM 4 8.962130256099563 20.524962029791428 2009-Apr-07 20:24:19 LOG4 log_alfabeam: ALFABEAM 5 8.960038306872798 20.429653167742114 2009-Apr-07 20:24:19 LOG4 log_alfabeam: ALFABEAM 6 8.964719350421316 20.346398596599077 2009-Apr-07 20:24:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700194 2009-Apr-07 20:24:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:24:20 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-07 20:24:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:24:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-07 20:24:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.587 (still bad) 2009-Apr-07 20:24:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-07 20:24:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1461.00 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.587 (still bad) 2009-Apr-07 20:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.585 (still bad) 2009-Apr-07 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.583 (still bad) 2009-Apr-07 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.587 (still bad) 2009-Apr-07 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.590 (still bad) 2009-Apr-07 20:24:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:24:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:24:31 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-07 20:24:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:24:31 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-07 20:24:31 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-07 20:24:31 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-07 20:24:31 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-07 20:24:31 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:24:31 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:24:31 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:24:31 LOG2 antvel: Parameters to Doppler: Topocentric 87871 2009 97 0.0 2009-Apr-07 20:24:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:24:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-07 20:24:31 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-07 20:24:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:24:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:24:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:24:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-07 20:24:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:24:31 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-07 20:24:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-07 20:24:31 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.051889 2009.2678996818515 18.999933 2009-Apr-07 20:24:31 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666688 20.440000000000008 2009-Apr-07 20:24:31 LOG4 log_alfabeam: ALFABEAM 1 8.971213401415799 20.355336420707392 2009-Apr-07 20:24:31 LOG4 log_alfabeam: ALFABEAM 2 8.973226156568424 20.447922195065694 2009-Apr-07 20:24:31 LOG4 log_alfabeam: ALFABEAM 3 8.968825438964590 20.534230045235415 2009-Apr-07 20:24:31 LOG4 log_alfabeam: ALFABEAM 4 8.962020365486673 20.523780298067500 2009-Apr-07 20:24:31 LOG4 log_alfabeam: ALFABEAM 5 8.960053205191526 20.427962621519239 2009-Apr-07 20:24:31 LOG4 log_alfabeam: ALFABEAM 6 8.964840407414554 20.345910212231331 2009-Apr-07 20:24:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700195 2009-Apr-07 20:24:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:24:32 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-07 20:24:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:24:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-07 20:24:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-07 20:24:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1473.00 2009-Apr-07 20:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.589 (still bad) 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.585 (still bad) 2009-Apr-07 20:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.588 (still bad) 2009-Apr-07 20:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.584 (still bad) 2009-Apr-07 20:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.593 (still bad) 2009-Apr-07 20:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.586 (still bad) 2009-Apr-07 20:24:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:24:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:24:43 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-07 20:24:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:24:43 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-07 20:24:43 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-07 20:24:43 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-07 20:24:43 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-07 20:24:43 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:24:43 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:24:43 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:24:43 LOG2 antvel: Parameters to Doppler: Topocentric 87883 2009 97 0.0 2009-Apr-07 20:24:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:24:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-07 20:24:43 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-07 20:24:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:24:43 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:24:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:24:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-07 20:24:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:24:43 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-07 20:24:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-07 20:24:43 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.055231 2009.2679000621085 18.999933 2009-Apr-07 20:24:43 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666706 20.439999999999994 2009-Apr-07 20:24:43 LOG4 log_alfabeam: ALFABEAM 1 8.971321637923218 20.356506188330954 2009-Apr-07 20:24:43 LOG4 log_alfabeam: ALFABEAM 2 8.973215245284001 20.449601978017689 2009-Apr-07 20:24:43 LOG4 log_alfabeam: ALFABEAM 3 8.968702592177335 20.534761141266411 2009-Apr-07 20:24:43 LOG4 log_alfabeam: ALFABEAM 4 8.961914093133592 20.522593883333741 2009-Apr-07 20:24:43 LOG4 log_alfabeam: ALFABEAM 5 8.960069947145282 20.426308910582566 2009-Apr-07 20:24:43 LOG4 log_alfabeam: ALFABEAM 6 8.964959713707703 20.345461119293983 2009-Apr-07 20:24:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700196 2009-Apr-07 20:24:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:24:44 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-07 20:24:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:24:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-07 20:24:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-07 20:24:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1485.00 2009-Apr-07 20:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.586 (still bad) 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.583 (still bad) 2009-Apr-07 20:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.579 (still bad) 2009-Apr-07 20:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.579 (still bad) 2009-Apr-07 20:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.589 (still bad) 2009-Apr-07 20:24:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:24:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:24:55 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-07 20:24:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:24:55 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-07 20:24:55 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-07 20:24:55 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-07 20:24:55 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-07 20:24:55 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:24:55 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:24:55 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:24:55 LOG2 antvel: Parameters to Doppler: Topocentric 87895 2009 97 0.0 2009-Apr-07 20:24:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:24:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-07 20:24:55 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-07 20:24:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:24:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:24:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:24:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-07 20:24:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:24:55 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-07 20:24:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-07 20:24:55 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.058574 2009.2679004423658 18.999933 2009-Apr-07 20:24:55 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666676 20.440000000000001 2009-Apr-07 20:24:55 LOG4 log_alfabeam: ALFABEAM 1 8.971426371164428 20.357680625746919 2009-Apr-07 20:24:55 LOG4 log_alfabeam: ALFABEAM 2 8.973202431038610 20.451247842004140 2009-Apr-07 20:24:55 LOG4 log_alfabeam: ALFABEAM 3 8.968581366728147 20.535251472231295 2009-Apr-07 20:24:55 LOG4 log_alfabeam: ALFABEAM 4 8.961811329908752 20.521404095510437 2009-Apr-07 20:24:55 LOG4 log_alfabeam: ALFABEAM 5 8.960088412701467 20.424691421509145 2009-Apr-07 20:24:55 LOG4 log_alfabeam: ALFABEAM 6 8.965077263788249 20.345049487184049 2009-Apr-07 20:24:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700197 2009-Apr-07 20:24:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:24:56 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-07 20:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.578 (still bad) 2009-Apr-07 20:24:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:24:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-07 20:24:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:24:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:24:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-07 20:24:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1497.00 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.567 (still bad) 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.569 (still bad) 2009-Apr-07 20:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.566 (still bad) 2009-Apr-07 20:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.568 (still bad) 2009-Apr-07 20:25:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:25:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.381 1.456 1.374 1.361 2009-Apr-07 20:25:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.333 1.296 1.418 1.419 2009-Apr-07 20:25:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.424 1.575 1.382 1.483 2009-Apr-07 20:25:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.534 0.100 1.363 0.123 2009-Apr-07 20:25:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:25:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:25:07 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-07 20:25:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:25:07 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-07 20:25:07 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-07 20:25:07 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-07 20:25:07 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-07 20:25:07 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:25:07 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:25:07 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:25:07 LOG2 antvel: Parameters to Doppler: Topocentric 87907 2009 97 0.0 2009-Apr-07 20:25:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:25:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-07 20:25:07 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-07 20:25:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:25:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:25:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:25:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:25:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-07 20:25:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:25:07 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-07 20:25:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-07 20:25:07 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.061916 2009.2679008226228 18.999933 2009-Apr-07 20:25:07 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666663 20.440000000000005 2009-Apr-07 20:25:07 LOG4 log_alfabeam: ALFABEAM 1 8.971527587261358 20.358857092938628 2009-Apr-07 20:25:07 LOG4 log_alfabeam: ALFABEAM 2 8.973187845512806 20.452858367983158 2009-Apr-07 20:25:07 LOG4 log_alfabeam: ALFABEAM 3 8.968461917799736 20.535702327401811 2009-Apr-07 20:25:07 LOG4 log_alfabeam: ALFABEAM 4 8.961712083573870 20.520213545346831 2009-Apr-07 20:25:07 LOG4 log_alfabeam: ALFABEAM 5 8.960108463870647 20.423111358052221 2009-Apr-07 20:25:07 LOG4 log_alfabeam: ALFABEAM 6 8.965192920993957 20.344673984990539 2009-Apr-07 20:25:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700198 2009-Apr-07 20:25:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:25:08 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-07 20:25:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:25:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-07 20:25:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.568 (still bad) 2009-Apr-07 20:25:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-07 20:25:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1509.00 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.568 (still bad) 2009-Apr-07 20:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.563 (still bad) 2009-Apr-07 20:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.563 (still bad) 2009-Apr-07 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.566 (still bad) 2009-Apr-07 20:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.572 (still bad) 2009-Apr-07 20:25:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:25:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:25:19 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-07 20:25:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:25:19 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-07 20:25:19 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-07 20:25:19 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-07 20:25:19 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-07 20:25:19 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:25:19 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:25:19 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:25:19 LOG2 antvel: Parameters to Doppler: Topocentric 87919 2009 97 0.0 2009-Apr-07 20:25:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:25:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-07 20:25:19 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-07 20:25:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:25:19 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:25:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:25:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:25:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-07 20:25:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-07 20:25:19 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-07 20:25:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-07 20:25:19 LOG5 log_alfabeam: Parameters: 8.9666666666666668 20.440000000000001 9.065259 2009.2679012028798 18.999933 2009-Apr-07 20:25:19 LOG4 log_alfabeam: ALFABEAM 0 8.966666666666692 20.440000000000005 2009-Apr-07 20:25:19 LOG4 log_alfabeam: ALFABEAM 1 8.971625403149305 20.360034474650288 2009-Apr-07 20:25:19 LOG4 log_alfabeam: ALFABEAM 2 8.973171601537640 20.454434220359840 2009-Apr-07 20:25:19 LOG4 log_alfabeam: ALFABEAM 3 8.968344245831439 20.536115579804420 2009-Apr-07 20:25:19 LOG4 log_alfabeam: ALFABEAM 4 8.961616233809055 20.519023298315695 2009-Apr-07 20:25:19 LOG4 log_alfabeam: ALFABEAM 5 8.960129989236986 20.421567881139246 2009-Apr-07 20:25:19 LOG4 log_alfabeam: ALFABEAM 6 8.965306698238516 20.344332805147928 2009-Apr-07 20:25:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909700199 2009-Apr-07 20:25:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-07 20:25:20 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-07 20:25:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:25:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-07 20:25:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:25:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-07 20:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.566 (still bad) 2009-Apr-07 20:25:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1521.00 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Apr-07 20:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Apr-07 20:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.562 (still bad) 2009-Apr-07 20:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Apr-07 20:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Apr-07 20:25:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:25:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-07 20:25:31 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-07 20:25:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-07 20:25:31 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-07 20:25:31 INFO2 smartfreq: Switching off CAL 2009-Apr-07 20:25:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:25:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:25:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:25:31 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-07 20:25:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:25:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:25:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:25:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:25:31 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-07 20:25:31 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-07 20:25:31 LOG5 antvel: Calling 'antvel 85800.000000 202624.000000 J Topocentric 0' 2009-Apr-07 20:25:31 LOG2 antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:25:31 LOG2 antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:25:31 LOG2 antvel: Parameters to Doppler: Topocentric 87931 2009 97 0.0 2009-Apr-07 20:25:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:25:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-07 20:25:31 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-07 20:25:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:25:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:25:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:25:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:25:31 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-07 20:25:31 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-07 20:25:31 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-07 20:25:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:25:31 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-07 20:25:31 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-07 20:25:31 NOTE run_command_file: DONE with command file processing 2009-Apr-07 20:25:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-07 20:25:32 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-07 20:25:32 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-07 20:25:32 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-07 20:25:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:25:32 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-07 20:25:32 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-07 20:25:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:25:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:25:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:25:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.562 (still bad) 2009-Apr-07 20:25:51 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-07 20:25:51 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-07 20:25:51 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-07 20:25:51 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-07 20:25:51 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-07 20:25:51 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-07 20:25:51 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-07 20:25:51 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-07 20:25:51 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-07 20:25:51 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-07 20:25:51 LOG3 exec_msg: Closing socket 2009-Apr-07 20:25:51 LOG3 exec_msg: Closing socket 2009-Apr-07 20:25:51 LOG3 exec_msg: Closing socket 2009-Apr-07 20:25:51 LOG3 exec_msg: Closing socket 2009-Apr-07 20:25:54 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-07 20:25:54 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-07 20:25:54 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-07 20:25:54 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-07 20:26:13 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-07 20:26:14 LOG2 CIMA-antvel: Precessing RA = 08:58:00.0 Dec = +20:26:24.0 Epoch = 2009.26790 J 2009-Apr-07 20:26:14 LOG2 CIMA-antvel: Computed apparent RA = 08:58:33.4 Dec = +20:24:13.0 2009-Apr-07 20:26:14 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 87974 2009 97 0.0 2009-Apr-07 20:26:14 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-07 20:26:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-07 20:26:16 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-07 20:26:16 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-07 20:26:16 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-07 20:26:16 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-07 20:26:16 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-07 20:26:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-07 20:26:16 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-07 20:26:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:26:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:26:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:26:16 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-07 20:26:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:26:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:26:16 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-07 20:26:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:26:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:26:16 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-07 20:26:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-07 20:26:16 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-07 20:26:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-07 20:26:16 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-07 20:26:16 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-07 20:26:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-07 20:26:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:26:16 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-07 20:26:16 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-07 20:26:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:26:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-07 20:26:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:26:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:26:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:26:17 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-07 20:26:17 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-07 20:26:17 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-07 20:26:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-07 20:26:17 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-07 20:26:17 LOG5 finish_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-07 20:26:17 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-07 20:26:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:26:17 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-07 20:26:17 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-07 20:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-07 20:26:17 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-07 20:26:17 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-07 20:26:17 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-07 20:26:17 LOG5 begin_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-07 20:26:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-07 20:26:17 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-07 20:26:17 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-07 20:26:17 START begin_task: Starting task 'selecting calibration port' 2009-Apr-07 20:26:17 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-07 20:26:17 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-07 20:26:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-07 20:26:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:26:17 START begin_task: Starting task 'waiting on calport' 2009-Apr-07 20:26:17 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-07 20:26:17 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-07 20:26:17 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-07 20:26:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:26:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:26:18 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-07 20:26:18 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-07 20:26:18 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-07 20:26:18 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:26:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:26:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:26:18 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:26:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:26:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:26:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:26:18 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:26:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:26:18 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-07 20:26:18 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-07 20:26:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:26:18 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-07 20:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-07 20:26:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:26:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:26:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:26:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:26:18 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-07 20:26:18 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-07 20:26:18 LOG5 finish_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-07 20:26:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:26:18 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-07 20:26:18 LOG5 end_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-07 20:26:18 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-07 20:26:18 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-07 20:26:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-07 20:26:18 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-07 20:26:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-07 20:26:19 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-07 20:26:19 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-07 20:26:19 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-07 20:26:19 LOG5 finish_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-07 20:26:19 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-07 20:26:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:26:19 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-07 20:26:19 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-07 20:26:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-07 20:26:19 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-07 20:26:20 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-07 20:26:57 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-07 20:26:57 LOG4 exec_msg: From OBSERVER: track_new_source drift84p2 090700.0 +202624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-07 20:26:57 LOG1 track_new_source: Calling 'track_new_source drift84p2 090700.0 +202624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-07 20:26:57 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-07 20:26:57 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift84p2} INFO {Selecting source 'drift84p2' ...} 2009-Apr-07 20:26:57 LOG3 track_source: Calling 'track_source drift84p2 090700.0 +202624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-07 20:26:57 START begin_task: Starting task 'sending tracking commands' 2009-Apr-07 20:26:57 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift84p2} INFO {Slewing to source 'drift84p2' ...} 2009-Apr-07 20:26:57 INFO1 track_source: Starting to track drift84p2 2009-Apr-07 20:26:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 20:26:57 LOG3 vw_send: To DATATAKING: set ra 090700.0 2009-Apr-07 20:26:57 LOG3 vw_send: To DATATAKING: set dec +202624 2009-Apr-07 20:26:57 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-07 20:26:57 LOG3 vw_send: To DATATAKING: pnt tr 090700.0 +202624 -CJ 2009-Apr-07 20:26:57 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-07 20:26:57 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-07 20:26:57 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-07 20:26:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:26:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-07 20:26:57 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-07 20:26:57 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-07 20:26:57 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-07 20:26:57 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-07 20:26:57 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-07 20:26:57 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-07 20:26:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:26:57 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-07 20:26:57 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-07 20:26:57 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 DONE finish_task: DONE finished selecting: new source 2009-Apr-07 20:26:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:26:57 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-07 20:26:57 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: set ra 090700.0 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: set dec +202624 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% 090700.0 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% +202624 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: pnt tr 090700.0 +202624 -CJ 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-07 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:27:15 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-07 20:27:15 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-07 20:27:15 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 20:27:15 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-07 20:27:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-07 20:27:15 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-07 20:27:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-07 20:27:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-07 20:27:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:27:15 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-07 20:27:15 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-07 20:27:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-07 20:27:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:27:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:27:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:27:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-07 20:27:18 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-07 20:27:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-07 20:27:18 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 20:27:18 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-07 20:27:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-07 20:27:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:27:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:27:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:27:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:27:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-07 20:27:19 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-07 20:27:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-07 20:27:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:27:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-07 20:27:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-07 20:27:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-07 20:27:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-07 20:27:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-07 20:27:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-07 20:27:19 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-07 20:27:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.993 1.067 ALFA beam 1: 0.994 0.987 2009-Apr-07 20:27:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.944 0.921 ALFA beam 3: 1.000 1.011 2009-Apr-07 20:27:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.995 1.089 ALFA beam 5: 0.984 1.086 2009-Apr-07 20:27:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.049 0.097 ALFA beam 7: 0.940 0.120 2009-Apr-07 20:27:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 20:27:19 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-07 20:27:19 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-07 20:27:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:27:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 20:27:19 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-07 20:27:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-07 20:27:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 20:27:19 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-07 20:27:19 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-07 20:27:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 20:27:19 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 20:27:19 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-07 20:27:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2009-Apr-07 20:27:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.067 0.994 0.987 2009-Apr-07 20:27:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.921 1.000 1.011 2009-Apr-07 20:27:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.089 0.984 1.086 2009-Apr-07 20:27:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.097 0.940 0.120 2009-Apr-07 20:27:29 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-07 20:27:29 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift84p2 090700.0 +202624 J 0 Topocentric velocity(optical) 2009-Apr-07 20:27:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift84p2 090700.0 +202624 J 0 Topocentric velocity(optical)' 2009-Apr-07 20:27:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-07 20:27:29 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-07 20:27:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift84p2' 2009-Apr-07 20:27:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-07 20:27:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift84p2} 2009-Apr-07 20:27:29 INFO5 fixed_driftmap: Start: year = 2009.2679053223312 RA = 09:07:33.3 Dec = +20:24:07.4 2009-Apr-07 20:27:29 NOTE fixed_driftmap: Setting ZA to 2:02:53.7 ... 2009-Apr-07 20:27:29 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.05 2009-Apr-07 20:27:29 LOG3 track_source: Calling 'track_source drift84p2 180.0 2.0482592050 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-07 20:27:29 START begin_task: Starting task 'sending tracking commands' 2009-Apr-07 20:27:29 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-07 20:27:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift84p2} INFO {Slewing to source 'drift84p2' ...} 2009-Apr-07 20:27:29 INFO1 track_source: Starting to track drift84p2 2009-Apr-07 20:27:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 20:27:29 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-07 20:27:30 LOG3 vw_send: To DATATAKING: set dec 2.0482592050 2009-Apr-07 20:27:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-07 20:27:30 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.0482592050 -CF 2009-Apr-07 20:27:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-07 20:27:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-07 20:27:30 LOG5 finish_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-07 20:27:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-07 20:27:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:27:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-07 20:27:30 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-07 20:27:30 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-07 20:27:30 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-07 20:27:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-07 20:27:30 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-07 20:27:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-07 20:27:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-07 20:27:30 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-07 20:27:30 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: set dec 2.0482592050 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: vw% 2.0482592050 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.0482592050 -CF 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-07 20:27:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:27:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-07 20:27:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-07 20:27:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-07 20:27:31 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-07 20:27:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-07 20:27:31 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-07 20:27:31 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-07 20:27:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-07 20:27:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:27:31 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-07 20:27:31 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-07 20:27:31 START begin_task: Starting task 'waiting on telescope' 2009-Apr-07 20:27:31 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-07 20:27:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-07 20:27:31 LOG3 waittrk: Start waittrk 5 2009-Apr-07 20:27:31 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-07 20:27:31 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-07 20:27:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-07 20:27:36 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-07 20:27:36 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-07 20:27:36 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-07 20:28:44 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-07 20:28:44 INFO2 waittrk: Now tracking drift84p2 2009-Apr-07 20:28:44 LOG4 waittrk: Current telescope position: Az = 179.88 ZA = 2.06 2009-Apr-07 20:28:44 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-07 20:28:44 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-07 20:28:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:28:44 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-07 20:28:44 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 START begin_task: Starting task 'selecting calibration type' 2009-Apr-07 20:28:44 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-07 20:28:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-07 20:28:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:28:44 START begin_task: Starting task 'waiting on setcal' 2009-Apr-07 20:28:44 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-07 20:28:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:28:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:28:44 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:28:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-07 20:28:44 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-07 20:28:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:28:44 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-07 20:28:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:28:44 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-07 20:28:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:28:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:28:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:28:45 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-07 20:28:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:28:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-07 20:28:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:28:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:28:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:28:45 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-07 20:28:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:28:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:28:45 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-07 20:28:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:28:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:28:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-07 20:28:45 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-07 20:28:45 LOG5 dopset_later: Calling 'dopset_later 11.744005814265833' 2009-Apr-07 20:28:45 INFO3 dopset_later: Setting Doppler correction for 20:28:57 (11.7 seconds from now) 2009-Apr-07 20:28:45 LOG5 antvel: Calling 'antvel 180.000000 2.048259 F Topocentric 11.744005814265833' 2009-Apr-07 20:28:45 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.05 to apparent RA = 09:07:33.2 Dec = +20:24:07.4 2009-Apr-07 20:28:45 LOG2 antvel: Parameters to Doppler: Topocentric 88137 2009 97 0.0 2009-Apr-07 20:28:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 20:28:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-07 20:28:45 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-07 20:28:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-07 20:28:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-07 20:28:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:28:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:28:45 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 20:28:45 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-07 20:28:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-07 20:28:45 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-07 20:28:45 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-07 20:28:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-07 20:28:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:28:45 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-07 20:28:45 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-07 20:28:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 20:28:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 20:28:45 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-07 20:28:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:28:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:28:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:28:48 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:28:48 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-07 20:28:48 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-07 20:28:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-07 20:28:48 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 20:28:48 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-07 20:28:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-07 20:28:48 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:28:48 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:28:48 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:28:48 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 20:28:48 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-07 20:28:48 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-07 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:28:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-07 20:28:49 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-07 20:28:49 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-07 20:28:49 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-07 20:28:49 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-07 20:28:49 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-07 20:28:49 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-07 20:28:49 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-07 20:28:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.998 1.066 ALFA beam 1: 1.003 0.989 2009-Apr-07 20:28:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.951 0.918 ALFA beam 3: 1.024 1.031 2009-Apr-07 20:28:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.017 1.108 ALFA beam 5: 0.995 1.108 2009-Apr-07 20:28:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.067 0.100 ALFA beam 7: 0.946 0.123 2009-Apr-07 20:28:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 20:28:49 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-07 20:28:49 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-07 20:28:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:28:49 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 20:28:49 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-07 20:28:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-07 20:28:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 20:28:49 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-07 20:28:49 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-07 20:28:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:28:49 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 20:28:49 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-07 20:28:49 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:07:33.3 LST = 09:07:25.5 diff = 7.8 secs 2009-Apr-07 20:28:49 INFO2 fixed_driftmap: Waiting 5.8 seconds for RA 9:07:33 2009-Apr-07 20:28:49 INFO2 lstwait: Waiting for 5.8 secs from LST 09:07:26 to LST 09:07:31 ... 2009-Apr-07 20:28:49 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5.7500166104276991 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-07 20:28:49 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-07 20:28:49 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-07 20:28:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:28:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 1.066 1.003 0.989 2009-Apr-07 20:28:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.918 1.024 1.031 2009-Apr-07 20:28:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.108 0.995 1.108 2009-Apr-07 20:28:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.100 0.946 0.123 2009-Apr-07 20:28:55 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-07 20:28:55 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-07 20:28:55 LOG4 lstwait: Finished waiting 0.25 seconds late 2009-Apr-07 20:28:55 INFO3 lstwait: Finished waiting 2009-Apr-07 20:28:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-07 20:28:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:28:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:28:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:28:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:28:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-07 20:28:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-07 20:28:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-07 20:28:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-07 20:28:55 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 20:28:55 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-07 20:28:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-07 20:28:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 20:28:55 INFO2 take_data: Starting WAPP 600-second scan: 909700200 2009-Apr-07 20:28:56 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 20:28:56 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-07 20:28:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:28:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20090407.a2010.0001.fits 2009-Apr-07 20:28:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:28:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090407.a2010.0001.fits} 2009-Apr-07 20:28:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-07 20:28:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1737.00 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-07 20:28:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-07 20:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:29:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:29:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.066 1.005 0.991 2009-Apr-07 20:29:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.922 1.027 1.030 2009-Apr-07 20:29:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.111 1.001 1.108 2009-Apr-07 20:29:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.100 0.959 0.123 2009-Apr-07 20:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-07 20:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-07 20:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.107 (still bad) 2009-Apr-07 20:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-07 20:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:30:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-07 20:30:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.075 1.002 0.990 2009-Apr-07 20:30:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.916 1.026 1.031 2009-Apr-07 20:30:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.111 0.997 1.111 2009-Apr-07 20:30:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.099 0.956 0.123 2009-Apr-07 20:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.108 (still bad) 2009-Apr-07 20:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-07 20:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-07 20:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-07 20:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:31:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.069 1.003 0.990 2009-Apr-07 20:31:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.918 1.027 1.032 2009-Apr-07 20:31:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.111 0.999 1.110 2009-Apr-07 20:31:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.948 0.123 2009-Apr-07 20:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-07 20:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-07 20:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-07 20:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-07 20:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-07 20:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:32:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:32:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 1.065 1.004 0.991 2009-Apr-07 20:32:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.921 1.025 1.029 2009-Apr-07 20:32:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.115 0.998 1.110 2009-Apr-07 20:32:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.100 0.947 0.123 2009-Apr-07 20:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-07 20:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-07 20:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-07 20:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-07 20:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-07 20:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-07 20:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:33:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:33:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.066 1.002 0.989 2009-Apr-07 20:33:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.919 1.026 1.030 2009-Apr-07 20:33:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.112 0.999 1.108 2009-Apr-07 20:33:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.947 0.123 2009-Apr-07 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-07 20:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:35:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:35:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 1.064 1.006 0.992 2009-Apr-07 20:35:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.920 1.027 1.033 2009-Apr-07 20:35:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.114 0.996 1.108 2009-Apr-07 20:35:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.100 0.949 0.123 2009-Apr-07 20:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-07 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-07 20:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-07 20:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-07 20:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:36:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:36:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.060 1.004 0.989 2009-Apr-07 20:36:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.920 1.025 1.029 2009-Apr-07 20:36:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.111 0.997 1.104 2009-Apr-07 20:36:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.948 0.123 2009-Apr-07 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-07 20:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Apr-07 20:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-07 20:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:37:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:37:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.062 1.002 0.988 2009-Apr-07 20:37:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.920 1.027 1.030 2009-Apr-07 20:37:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.109 0.996 1.108 2009-Apr-07 20:37:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.100 0.945 0.123 2009-Apr-07 20:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-07 20:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Apr-07 20:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-07 20:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-07 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-07 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-07 20:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2009-Apr-07 20:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 20:38:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:38:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.062 1.003 0.986 2009-Apr-07 20:38:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.928 1.025 1.031 2009-Apr-07 20:38:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.129 0.996 1.111 2009-Apr-07 20:38:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.100 0.947 0.123 2009-Apr-07 20:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-07 20:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-07 20:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:38:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:38:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-07 20:38:57 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-07 20:38:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-07 20:38:57 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-07 20:38:57 LOG1 fixed_driftmap: New position: year = 2009.2679271237357 RA = 09:17:02.8 RA/Dec = 09:17:36.0 +20:24:01.5 2009-Apr-07 20:38:57 NOTE fixed_driftmap: Correcting ZA to 2:02:47.8 ... 2009-Apr-07 20:38:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.0466130653 -CF 2009-Apr-07 20:38:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-07 20:38:57 START begin_task: Starting task 'WAPP calibration' 2009-Apr-07 20:38:57 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-07 20:38:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-07 20:38:57 START begin_task: Starting task 'selecting calibration type' 2009-Apr-07 20:38:57 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-07 20:38:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-07 20:38:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-07 20:38:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:38:57 START begin_task: Starting task 'waiting on setcal' 2009-Apr-07 20:38:57 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-07 20:38:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.0466130653 -CF 2009-Apr-07 20:38:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:38:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-07 20:38:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:38:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:38:57 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:38:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-07 20:38:57 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-07 20:38:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-07 20:38:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:38:57 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-07 20:38:57 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:38:57 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-07 20:38:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:38:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:38:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:38:58 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:38:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-07 20:38:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:38:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:38:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:38:58 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:38:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:38:58 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:38:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:38:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-07 20:38:58 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-07 20:38:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-07 20:38:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-07 20:38:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:38:58 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:38:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-07 20:38:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:38:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:38:58 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-07 20:38:58 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 20:38:58 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-07 20:38:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 20:38:58 INFO2 take_data: Starting WAPP 1-second scan: 909700201 2009-Apr-07 20:38:58 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 20:38:58 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-07 20:38:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:38:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-07 20:38:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2339.00 2009-Apr-07 20:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:39:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:39:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-07 20:39:00 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-07 20:39:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-07 20:39:00 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-07 20:39:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-07 20:39:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:39:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:39:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:39:00 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-07 20:39:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:39:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:39:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:39:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:39:00 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-07 20:39:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-07 20:39:00 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-07 20:39:00 LOG5 finish_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-07 20:39:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-07 20:39:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:39:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-07 20:39:00 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-07 20:39:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-07 20:39:00 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-07 20:39:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:39:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:39:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:39:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:39:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-07 20:39:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-07 20:39:01 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 20:39:01 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-07 20:39:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-07 20:39:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 20:39:01 INFO2 take_data: Starting WAPP 600-second scan: 909700202 2009-Apr-07 20:39:01 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 20:39:01 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-07 20:39:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.572 (still bad) 2009-Apr-07 20:39:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:39:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-07 20:39:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20090407.a2010.0002.fits 2009-Apr-07 20:39:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2342.00 2009-Apr-07 20:39:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090407.a2010.0002.fits} 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.572 (still bad) 2009-Apr-07 20:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:39:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:39:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.064 1.003 0.988 2009-Apr-07 20:39:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.920 1.027 1.031 2009-Apr-07 20:39:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.118 0.999 1.108 2009-Apr-07 20:39:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.100 0.949 0.123 2009-Apr-07 20:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:40:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:40:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 1.073 1.009 0.995 2009-Apr-07 20:40:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.925 1.032 1.038 2009-Apr-07 20:40:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.123 1.002 1.120 2009-Apr-07 20:40:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.100 0.954 0.123 2009-Apr-07 20:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:41:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:41:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.074 1.017 1.002 2009-Apr-07 20:41:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.924 1.033 1.038 2009-Apr-07 20:41:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.121 1.011 1.125 2009-Apr-07 20:41:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.100 0.955 0.123 2009-Apr-07 20:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:42:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:42:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 1.068 1.007 0.992 2009-Apr-07 20:42:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.921 1.027 1.032 2009-Apr-07 20:42:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.116 0.999 1.123 2009-Apr-07 20:42:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.100 0.953 0.123 2009-Apr-07 20:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-07 20:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:43:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:43:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.069 1.006 0.991 2009-Apr-07 20:43:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.924 1.027 1.033 2009-Apr-07 20:43:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.114 0.997 1.114 2009-Apr-07 20:43:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.100 0.949 0.123 2009-Apr-07 20:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:44:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.067 1.004 0.991 2009-Apr-07 20:44:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.923 1.025 1.027 2009-Apr-07 20:44:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.115 0.999 1.113 2009-Apr-07 20:44:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.100 0.949 0.123 2009-Apr-07 20:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-07 20:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:45:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:45:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.066 1.006 0.991 2009-Apr-07 20:45:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.923 1.027 1.032 2009-Apr-07 20:45:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.118 0.999 1.115 2009-Apr-07 20:45:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.100 0.952 0.123 2009-Apr-07 20:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:46:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.066 1.006 0.989 2009-Apr-07 20:46:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.922 1.027 1.035 2009-Apr-07 20:46:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.120 1.000 1.118 2009-Apr-07 20:46:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.100 0.952 0.123 2009-Apr-07 20:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:47:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:47:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 1.070 1.005 0.990 2009-Apr-07 20:47:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.926 1.024 1.033 2009-Apr-07 20:47:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.113 0.997 1.114 2009-Apr-07 20:47:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.100 0.950 0.123 2009-Apr-07 20:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-07 20:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:48:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:48:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.071 1.007 0.994 2009-Apr-07 20:48:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.921 1.026 1.037 2009-Apr-07 20:48:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.031 1.125 0.999 1.123 2009-Apr-07 20:48:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.100 0.952 0.123 2009-Apr-07 20:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:48:45 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:48:45.302 (seconds: 74925.302)!} 2009-Apr-07 20:48:45 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:48:45.302 (seconds: 74925.302)! 2009-Apr-07 20:48:46 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 74924.0 to 74925.0! 2009-Apr-07 20:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:48:47 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (74924.0 - 74926.0)! 2009-Apr-07 20:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:49:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:49:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-07 20:49:02 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-07 20:49:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-07 20:49:02 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-07 20:49:02 LOG1 fixed_driftmap: New position: year = 2009.2679462950287 RA = 09:27:09.6 RA/Dec = 09:27:42.6 +20:23:55.8 2009-Apr-07 20:49:02 NOTE fixed_driftmap: Correcting ZA to 2:02:42.1 ... 2009-Apr-07 20:49:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.0450290265 -CF 2009-Apr-07 20:49:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-07 20:49:02 START begin_task: Starting task 'WAPP calibration' 2009-Apr-07 20:49:02 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-07 20:49:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-07 20:49:02 START begin_task: Starting task 'selecting calibration type' 2009-Apr-07 20:49:02 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-07 20:49:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-07 20:49:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-07 20:49:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:49:02 START begin_task: Starting task 'waiting on setcal' 2009-Apr-07 20:49:02 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-07 20:49:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.0450290265 -CF 2009-Apr-07 20:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:49:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-07 20:49:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:49:02 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:49:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-07 20:49:02 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-07 20:49:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-07 20:49:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:49:02 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-07 20:49:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:49:02 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-07 20:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:49:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:49:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:49:03 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:49:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-07 20:49:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:49:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:49:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:49:03 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:49:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:49:03 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:49:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:49:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-07 20:49:03 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-07 20:49:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-07 20:49:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-07 20:49:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:49:03 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:49:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-07 20:49:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:49:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:49:03 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-07 20:49:03 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 20:49:03 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-07 20:49:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 20:49:03 INFO2 take_data: Starting WAPP 1-second scan: 909700203 2009-Apr-07 20:49:03 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 20:49:03 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-07 20:49:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:49:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-07 20:49:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2944.00 2009-Apr-07 20:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:49:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:49:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:49:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-07 20:49:05 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-07 20:49:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-07 20:49:05 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-07 20:49:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-07 20:49:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:49:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:49:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:49:05 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-07 20:49:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:49:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:49:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:49:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:49:06 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-07 20:49:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-07 20:49:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-07 20:49:06 LOG5 finish_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-07 20:49:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-07 20:49:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:49:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-07 20:49:06 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-07 20:49:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-07 20:49:06 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-07 20:49:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:49:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:49:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:49:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:49:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-07 20:49:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-07 20:49:06 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 20:49:06 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-07 20:49:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-07 20:49:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 20:49:06 INFO2 take_data: Starting WAPP 600-second scan: 909700204 2009-Apr-07 20:49:06 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 20:49:06 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-07 20:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.570 (still bad) 2009-Apr-07 20:49:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-07 20:49:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2947.00 2009-Apr-07 20:49:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20090407.a2010.0003.fits 2009-Apr-07 20:49:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090407.a2010.0003.fits} 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:49:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.570 (still bad) 2009-Apr-07 20:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:49:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:49:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 1.072 1.006 0.993 2009-Apr-07 20:49:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.919 1.028 1.039 2009-Apr-07 20:49:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.112 0.999 1.124 2009-Apr-07 20:49:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.951 0.123 2009-Apr-07 20:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 20:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:50:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.079 1.010 0.996 2009-Apr-07 20:50:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.923 1.030 1.041 2009-Apr-07 20:50:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.120 1.002 1.129 2009-Apr-07 20:50:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.100 0.955 0.123 2009-Apr-07 20:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:51:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:51:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.075 1.009 0.993 2009-Apr-07 20:51:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.920 1.026 1.038 2009-Apr-07 20:51:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.123 0.998 1.122 2009-Apr-07 20:51:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.100 0.950 0.123 2009-Apr-07 20:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:52:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:52:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.071 1.007 0.993 2009-Apr-07 20:52:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.918 1.023 1.038 2009-Apr-07 20:52:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.115 0.999 1.120 2009-Apr-07 20:52:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.950 0.123 2009-Apr-07 20:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:53:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 1.067 1.003 0.989 2009-Apr-07 20:53:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.918 1.024 1.035 2009-Apr-07 20:53:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.112 0.995 1.118 2009-Apr-07 20:53:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.952 0.123 2009-Apr-07 20:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-07 20:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-07 20:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-07 20:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-07 20:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:54:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.066 1.003 0.987 2009-Apr-07 20:54:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.920 1.029 1.039 2009-Apr-07 20:54:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.115 0.996 1.120 2009-Apr-07 20:54:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.100 0.948 0.123 2009-Apr-07 20:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:55:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:55:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.068 1.005 0.988 2009-Apr-07 20:55:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.919 1.025 1.035 2009-Apr-07 20:55:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.115 0.999 1.128 2009-Apr-07 20:55:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.100 0.952 0.123 2009-Apr-07 20:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 20:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 20:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 20:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:56:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:56:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.070 1.005 0.988 2009-Apr-07 20:56:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.922 1.023 1.037 2009-Apr-07 20:56:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.117 0.999 1.127 2009-Apr-07 20:56:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.950 0.123 2009-Apr-07 20:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 20:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 20:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 20:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-07 20:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:57:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:57:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.071 1.005 0.992 2009-Apr-07 20:57:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.922 1.025 1.037 2009-Apr-07 20:57:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.116 1.006 1.133 2009-Apr-07 20:57:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.950 0.123 2009-Apr-07 20:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 20:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.137 (still bad) 2009-Apr-07 20:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 20:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-07 20:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.135 (still bad) 2009-Apr-07 20:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.135 (still bad) 2009-Apr-07 20:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-07 20:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 20:58:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:58:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.074 1.007 0.990 2009-Apr-07 20:58:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.921 1.028 1.038 2009-Apr-07 20:58:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.118 1.004 1.128 2009-Apr-07 20:58:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.951 0.123 2009-Apr-07 20:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:59:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:59:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-07 20:59:07 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-07 20:59:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-07 20:59:07 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-07 20:59:07 LOG1 fixed_driftmap: New position: year = 2009.2679654663218 RA = 09:37:16.3 RA/Dec = 09:37:49.3 +20:23:50.4 2009-Apr-07 20:59:07 NOTE fixed_driftmap: Correcting ZA to 2:02:36.7 ... 2009-Apr-07 20:59:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.0435212147 -CF 2009-Apr-07 20:59:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-07 20:59:07 START begin_task: Starting task 'WAPP calibration' 2009-Apr-07 20:59:07 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-07 20:59:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-07 20:59:07 START begin_task: Starting task 'selecting calibration type' 2009-Apr-07 20:59:07 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-07 20:59:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-07 20:59:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-07 20:59:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:59:07 START begin_task: Starting task 'waiting on setcal' 2009-Apr-07 20:59:07 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-07 20:59:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.0435212147 -CF 2009-Apr-07 20:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:59:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-07 20:59:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 20:59:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:59:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 20:59:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-07 20:59:08 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-07 20:59:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:59:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-07 20:59:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:59:08 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 20:59:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:59:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:59:08 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:59:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-07 20:59:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 20:59:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:59:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 20:59:08 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 20:59:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 20:59:08 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 20:59:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 20:59:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-07 20:59:08 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-07 20:59:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-07 20:59:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-07 20:59:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:59:08 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:59:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-07 20:59:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:59:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:59:08 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-07 20:59:08 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 20:59:08 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-07 20:59:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 20:59:08 INFO2 take_data: Starting WAPP 1-second scan: 909700205 2009-Apr-07 20:59:08 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 20:59:08 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-07 20:59:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:59:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-07 20:59:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3549.00 2009-Apr-07 20:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:59:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:59:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 20:59:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-07 20:59:10 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-07 20:59:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-07 20:59:10 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-07 20:59:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-07 20:59:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 20:59:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 20:59:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 20:59:10 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-07 20:59:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 20:59:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 20:59:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 20:59:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 20:59:10 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-07 20:59:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-07 20:59:10 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-07 20:59:10 LOG5 finish_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-07 20:59:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-07 20:59:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 20:59:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-07 20:59:10 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-07 20:59:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-07 20:59:11 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-07 20:59:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:59:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:59:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:59:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 20:59:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-07 20:59:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-07 20:59:11 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 20:59:11 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-07 20:59:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-07 20:59:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 20:59:11 INFO2 take_data: Starting WAPP 600-second scan: 909700206 2009-Apr-07 20:59:11 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 20:59:11 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-07 20:59:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 20:59:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 20:59:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-07 20:59:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3552.00 2009-Apr-07 20:59:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20090407.a2010.0004.fits 2009-Apr-07 20:59:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090407.a2010.0004.fits} 2009-Apr-07 20:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.577 (still bad) 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 20:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 20:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 20:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.135 (still bad) 2009-Apr-07 20:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:59:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 20:59:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.073 1.008 0.991 2009-Apr-07 20:59:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.920 1.028 1.040 2009-Apr-07 20:59:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.117 1.001 1.128 2009-Apr-07 20:59:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.950 0.123 2009-Apr-07 20:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-07 20:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 20:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 20:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 20:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 20:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 20:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 20:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 20:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:00:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:00:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 1.073 1.010 0.993 2009-Apr-07 21:00:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.920 1.030 1.042 2009-Apr-07 21:00:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.117 1.005 1.127 2009-Apr-07 21:00:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.100 0.953 0.123 2009-Apr-07 21:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 21:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:01:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:01:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.073 1.012 0.993 2009-Apr-07 21:01:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.922 1.027 1.041 2009-Apr-07 21:01:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.119 1.004 1.119 2009-Apr-07 21:01:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.100 0.952 0.123 2009-Apr-07 21:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 21:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-07 21:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-07 21:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:02:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:02:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 1.075 1.009 0.993 2009-Apr-07 21:02:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.922 1.029 1.040 2009-Apr-07 21:02:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.120 1.005 1.123 2009-Apr-07 21:02:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.100 0.956 0.123 2009-Apr-07 21:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.135 (still bad) 2009-Apr-07 21:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.087 1.008 0.991 2009-Apr-07 21:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.920 1.026 1.036 2009-Apr-07 21:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.115 1.003 1.126 2009-Apr-07 21:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.100 0.953 0.124 2009-Apr-07 21:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 21:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.137 (still bad) 2009-Apr-07 21:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 21:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:04:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:04:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.076 1.010 0.993 2009-Apr-07 21:04:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.922 1.030 1.041 2009-Apr-07 21:04:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.119 1.007 1.122 2009-Apr-07 21:04:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.100 0.953 0.123 2009-Apr-07 21:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.135 (still bad) 2009-Apr-07 21:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.136 (still bad) 2009-Apr-07 21:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.136 (still bad) 2009-Apr-07 21:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 21:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:05:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:05:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.098 1.011 0.995 2009-Apr-07 21:05:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.924 1.031 1.041 2009-Apr-07 21:05:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.031 1.122 1.006 1.129 2009-Apr-07 21:05:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.100 0.956 0.123 2009-Apr-07 21:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Apr-07 21:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.138 (still bad) 2009-Apr-07 21:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.144 (still bad) 2009-Apr-07 21:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.154 (still bad) 2009-Apr-07 21:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.161 (still bad) 2009-Apr-07 21:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.168 (still bad) 2009-Apr-07 21:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.169 (still bad) 2009-Apr-07 21:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.164 (still bad) 2009-Apr-07 21:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.157 (still bad) 2009-Apr-07 21:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.150 (still bad) 2009-Apr-07 21:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.142 (still bad) 2009-Apr-07 21:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.135 (still bad) 2009-Apr-07 21:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.138 (still bad) 2009-Apr-07 21:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-07 21:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:06:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:06:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 1.074 1.009 0.991 2009-Apr-07 21:06:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.924 1.028 1.037 2009-Apr-07 21:06:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.031 1.120 1.001 1.127 2009-Apr-07 21:06:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.100 0.952 0.123 2009-Apr-07 21:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Apr-07 21:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-07 21:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-07 21:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Apr-07 21:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:07:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:07:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.080 1.010 0.992 2009-Apr-07 21:07:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 0.926 1.030 1.038 2009-Apr-07 21:07:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 1.127 1.005 1.122 2009-Apr-07 21:07:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.100 0.953 0.123 2009-Apr-07 21:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.133 (still bad) 2009-Apr-07 21:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-07 21:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-07 21:08:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-07 21:08:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 1.078 1.017 0.997 2009-Apr-07 21:08:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 0.933 1.036 1.043 2009-Apr-07 21:08:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 1.124 1.004 1.122 2009-Apr-07 21:08:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.100 0.954 0.123 2009-Apr-07 21:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-07 21:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-07 21:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Apr-07 21:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-07 21:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Apr-07 21:09:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 21:09:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-07 21:09:12 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-07 21:09:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-07 21:09:12 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-07 21:09:12 LOG1 fixed_driftmap: New position: year = 2009.267984637615 RA = 09:47:23.1 RA/Dec = 09:47:56.0 +20:23:45.2 2009-Apr-07 21:09:12 NOTE fixed_driftmap: Correcting ZA to 2:02:31.5 ... 2009-Apr-07 21:09:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.0420925561 -CF 2009-Apr-07 21:09:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-07 21:09:12 START begin_task: Starting task 'WAPP calibration' 2009-Apr-07 21:09:12 LOG5 begin_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-07 21:09:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-07 21:09:12 START begin_task: Starting task 'selecting calibration type' 2009-Apr-07 21:09:12 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-07 21:09:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-07 21:09:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-07 21:09:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:09:12 START begin_task: Starting task 'waiting on setcal' 2009-Apr-07 21:09:12 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-07 21:09:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.0420925561 -CF 2009-Apr-07 21:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:09:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-07 21:09:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Apr-07 21:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:09:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 21:09:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-07 21:09:12 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-07 21:09:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-07 21:09:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 21:09:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-07 21:09:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 21:09:13 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:09:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 21:09:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 21:09:13 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 21:09:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-07 21:09:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 21:09:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 21:09:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 21:09:13 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 21:09:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 21:09:13 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 21:09:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 21:09:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-07 21:09:13 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-07 21:09:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-07 21:09:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-07 21:09:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 21:09:13 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 21:09:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-07 21:09:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 21:09:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 21:09:13 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-07 21:09:13 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-07 21:09:13 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-07 21:09:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-07 21:09:13 INFO2 take_data: Starting WAPP 1-second scan: 909700207 2009-Apr-07 21:09:13 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-07 21:09:13 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-07 21:09:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-07 21:09:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-07 21:09:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4154.00 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.771970 MHz 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.614083 MHz 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.657358 MHz 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-07 21:09:15 LOG3 WAPP=1+2+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-07 21:09:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-07 21:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.465 (still bad) 2009-Apr-07 21:09:15 LOG5 wapp_failed: Calling 'wapp_failed 3' 2009-Apr-07 21:09:15 ERROR wapp_failed: ERROR WAPP-3 failed to complete its current task! 2009-Apr-07 21:09:15 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 abort' 2009-Apr-07 21:09:15 START begin_task: Starting task 'handling WAPP failure' 2009-Apr-07 21:09:15 LOG5 begin_task: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-07 21:09:15 NOTE handle_wapp_failure: Will abort task 'fixed azimuth drift map' since the WAPP failure preference is set to 'abort'! 2009-Apr-07 21:09:15 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2009-Apr-07 21:09:15 LOG1 task_failed: Task 'handling WAPP failure' failed! 2009-Apr-07 21:09:15 LOG5 task_failed: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-07 21:09:15 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2009-Apr-07 21:09:15 LOG5 end_task: Level: (5) ID = <10166> Status = 0 0 0 1 failed 2009-Apr-07 21:09:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'FAILED' 2009-Apr-07 21:09:15 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 1 failed 2009-Apr-07 21:09:15 LOG4 stop_backends: Calling 'stop_backends' 2009-Apr-07 21:09:15 START begin_task: Starting task 'stopping the WAPPs' 2009-Apr-07 21:09:15 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 1 failed 2009-Apr-07 21:09:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Apr-07 21:09:15 INFO1 stop_wapp: Stopping the WAPPs 2009-Apr-07 21:09:16 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Apr-07 21:09:16 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Apr-07 21:09:16 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Apr-07 21:09:16 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Apr-07 21:09:16 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Apr-07 21:09:16 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Apr-07 21:09:16 ERROR WAPP=3-read_timeout: ERROR time-out while waiting for data from the correlator! 2009-Apr-07 21:09:16 ERROR WAPP=3-start_spectra: ERROR failed to read spectral line data! 2009-Apr-07 21:09:16 PROBLEM WAPP=3-start_spectra: Reason: Connection timed out! 2009-Apr-07 21:09:16 ERROR WAPP=3-start_spectra: ERROR the correlator has failed to start! 2009-Apr-07 21:09:16 INFO1 WAPP=1+2+3+4-wappcon: Can't abort --- the WAPP isn't running 2009-Apr-07 21:09:16 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2009-Apr-07 21:09:16 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2009-Apr-07 21:09:16 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'FAILED' 2009-Apr-07 21:09:16 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-07 21:09:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 21:09:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 21:09:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-07 21:09:16 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-07 21:09:16 LOG5 finish_task: Level: (2) ID = <10158> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 ERROR finish_task: ERROR failed calibration: WAPP calibration 2009-Apr-07 21:09:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2009-Apr-07 21:09:16 STOP end_task: Finishing task 'WAPP calibration' with status 'FAILED' 2009-Apr-07 21:09:16 LOG5 end_task: Level: (2) ID = <10158> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-07 21:09:16 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2009-Apr-07 21:09:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-07 21:09:16 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2009-Apr-07 21:09:16 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 1 failed 2009-Apr-07 21:09:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 21:09:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 21:09:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 21:09:17 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 12 dumps! 2009-Apr-07 21:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.532 (still bad) 2009-Apr-07 21:09:30 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Apr-07 21:09:30 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Apr-07 21:09:30 WARNING abort_task: WARNING abort requested! 2009-Apr-07 21:11:07 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Apr-07 21:11:07 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Apr-07 21:11:07 WARNING abort_task: WARNING abort requested! 2009-Apr-07 21:11:23 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-07 21:11:23 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-07 21:11:23 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-07 21:11:23 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-07 21:11:23 LOG5 begin_task: Level: (1) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-07 21:11:23 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-07 21:11:23 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-07 21:11:23 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-07 21:11:23 LOG5 end_task: Level: (1) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-07 21:11:23 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-07 21:11:23 LOG3 exec_msg: Closing socket 2009-Apr-07 21:11:23 LOG3 exec_msg: Closing socket 2009-Apr-07 21:11:23 LOG3 exec_msg: Closing socket 2009-Apr-07 21:11:23 LOG3 exec_msg: Closing socket 2009-Apr-07 21:11:26 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-07 21:11:26 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-07 21:11:26 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-07 21:11:26 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-07 21:11:42 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-07 21:11:43 LOG2 CIMA-antvel: Precessing RA = 09:07:00.0 Dec = +20:26:24.0 Epoch = 2009.26799 J 2009-Apr-07 21:11:43 LOG2 CIMA-antvel: Computed apparent RA = 09:07:33.3 Dec = +20:24:07.4 2009-Apr-07 21:11:43 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 90702 2009 97 0.0 2009-Apr-07 21:11:43 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-07 21:11:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-07 21:11:44 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-07 21:11:44 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-07 21:11:44 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-07 21:11:45 LOG5 begin_task: Level: (1) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-07 21:11:45 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-07 21:11:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-07 21:11:45 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-07 21:11:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-07 21:11:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-07 21:11:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-07 21:11:45 LOG5 begin_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-07 21:11:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-07 21:11:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-07 21:11:45 LOG5 end_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-07 21:11:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-07 21:11:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-07 21:11:45 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-07 21:11:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-07 21:11:45 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-07 21:11:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-07 21:11:45 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-07 21:11:45 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-07 21:11:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-07 21:11:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:11:45 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-07 21:11:45 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-07 21:11:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-07 21:11:45 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-07 21:11:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-07 21:11:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-07 21:11:45 LOG5 finish_task: Level: (1) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-07 21:11:45 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-07 21:11:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 21:11:45 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-07 21:11:45 LOG5 end_task: Level: (1) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-07 21:11:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:11:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-07 21:11:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-07 21:11:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-07 21:11:46 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-07 21:11:46 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-07 21:11:46 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-07 21:11:46 LOG5 begin_task: Level: (1) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-07 21:11:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-07 21:11:46 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-07 21:11:46 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-07 21:11:46 START begin_task: Starting task 'selecting calibration port' 2009-Apr-07 21:11:46 LOG5 begin_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-07 21:11:46 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-07 21:11:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-07 21:11:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:11:46 START begin_task: Starting task 'waiting on calport' 2009-Apr-07 21:11:46 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-07 21:11:46 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-07 21:11:46 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-07 21:11:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:11:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:11:46 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 21:11:46 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-07 21:11:46 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-07 21:11:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-07 21:11:46 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-07 21:11:46 LOG5 end_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-07 21:11:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-07 21:11:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-07 21:11:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 21:11:46 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-07 21:11:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:11:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 21:11:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 21:11:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 21:11:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 21:11:46 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-07 21:11:46 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-07 21:11:46 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-07 21:11:46 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-07 21:11:46 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-07 21:11:46 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-07 21:11:46 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-07 21:11:47 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-07 21:11:47 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-07 21:11:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Manolis Papastergis 2009-Apr-07 21:11:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Manolis Papastergis 2009-Apr-07 21:11:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Manolis Papastergis 2009-Apr-07 21:11:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Manolis Papastergis 2009-Apr-07 21:11:47 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-07 21:11:47 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-07 21:11:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-07 21:11:47 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-07 21:11:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-07 21:11:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-07 21:11:47 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-07 21:11:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Manolis Papastergis' 2009-Apr-07 21:11:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-07 21:11:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-07 21:11:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-07 21:11:47 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-07 21:11:47 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-07 21:11:47 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-07 21:11:47 LOG5 finish_task: Level: (1) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-07 21:11:47 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-07 21:11:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 21:11:47 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-07 21:11:47 LOG5 end_task: Level: (1) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-07 21:11:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-07 21:11:47 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-07 21:11:47 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-07 21:11:47 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-07 21:11:47 LOG5 begin_task: Level: (1) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-07 21:11:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-07 21:11:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-07 21:11:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-07 21:11:47 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-07 21:11:47 LOG5 finish_task: Level: (1) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-07 21:11:47 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-07 21:11:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 21:11:47 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-07 21:11:47 LOG5 end_task: Level: (1) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-07 21:11:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-07 21:11:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-07 21:11:48 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-07 21:12:09 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-07 21:12:09 LOG4 exec_msg: From OBSERVER: track_new_source drift84p2 095300.0 +202624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-07 21:12:09 LOG1 track_new_source: Calling 'track_new_source drift84p2 095300.0 +202624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-07 21:12:09 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-07 21:12:09 LOG5 begin_task: Level: (1) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift84p2} INFO {Selecting source 'drift84p2' ...} 2009-Apr-07 21:12:09 LOG3 track_source: Calling 'track_source drift84p2 095300.0 +202624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-07 21:12:09 START begin_task: Starting task 'sending tracking commands' 2009-Apr-07 21:12:09 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift84p2} INFO {Slewing to source 'drift84p2' ...} 2009-Apr-07 21:12:09 INFO1 track_source: Starting to track drift84p2 2009-Apr-07 21:12:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 21:12:09 LOG3 vw_send: To DATATAKING: set ra 095300.0 2009-Apr-07 21:12:09 LOG3 vw_send: To DATATAKING: set dec +202624 2009-Apr-07 21:12:09 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-07 21:12:09 LOG3 vw_send: To DATATAKING: pnt tr 095300.0 +202624 -CJ 2009-Apr-07 21:12:09 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-07 21:12:09 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-07 21:12:09 LOG5 finish_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-07 21:12:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 21:12:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-07 21:12:09 LOG5 end_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-07 21:12:09 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-07 21:12:09 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-07 21:12:09 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-07 21:12:09 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-07 21:12:09 LOG5 finish_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-07 21:12:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 21:12:09 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-07 21:12:09 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-07 21:12:09 LOG5 finish_task: Level: (1) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 DONE finish_task: DONE finished selecting: new source 2009-Apr-07 21:12:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 21:12:09 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-07 21:12:09 LOG5 end_task: Level: (1) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: set ra 095300.0 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: set dec +202624 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: vw% 095300.0 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: vw% +202624 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: pnt tr 095300.0 +202624 -CJ 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-07 21:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:12:16 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-07 21:12:16 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-07 21:12:16 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 21:12:16 LOG5 begin_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-07 21:12:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-07 21:12:16 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-07 21:12:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-07 21:12:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-07 21:12:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:12:16 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-07 21:12:16 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-07 21:12:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-07 21:12:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-07 21:12:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:12:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-07 21:12:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-07 21:12:19 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-07 21:12:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-07 21:12:19 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-07 21:12:19 LOG5 begin_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-07 21:12:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-07 21:12:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 21:12:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 21:12:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 21:12:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-07 21:12:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-07 21:12:19 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-07 21:12:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:12:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-07 21:12:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-07 21:12:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 3 dB 2009-Apr-07 21:12:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-07 21:12:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-07 21:12:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-07 21:12:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-07 21:12:19 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-07 21:12:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.996 1.070 ALFA beam 1: 1.013 0.993 2009-Apr-07 21:12:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.962 0.926 ALFA beam 3: 1.015 1.018 2009-Apr-07 21:12:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.022 1.105 ALFA beam 5: 1.003 1.104 2009-Apr-07 21:12:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.054 0.098 ALFA beam 7: 0.946 0.120 2009-Apr-07 21:12:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 21:12:20 LOG5 finish_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-07 21:12:20 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-07 21:12:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 21:12:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 21:12:20 LOG5 end_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-07 21:12:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-07 21:12:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-07 21:12:20 LOG5 finish_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-07 21:12:20 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-07 21:12:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-07 21:12:20 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-07 21:12:20 LOG5 end_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-07 21:12:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-07 21:12:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.070 1.013 0.993 2009-Apr-07 21:12:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 0.926 1.015 1.018 2009-Apr-07 21:12:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.105 1.003 1.104 2009-Apr-07 21:12:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.098 0.946 0.120 2009-Apr-07 21:12:23 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-07 21:12:23 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift84p2 095300.0 +202624 J 0 Topocentric velocity(optical) 2009-Apr-07 21:12:23 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift84p2 095300.0 +202624 J 0 Topocentric velocity(optical)' 2009-Apr-07 21:12:23 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-07 21:12:23 LOG5 begin_task: Level: (1) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-07 21:12:23 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift84p2' 2009-Apr-07 21:12:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-07 21:12:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift84p2} 2009-Apr-07 21:12:24 INFO5 fixed_driftmap: Start: year = 2009.2679906900398 RA = 09:53:32.8 Dec = +20:23:42.5 2009-Apr-07 21:12:24 NOTE fixed_driftmap: Setting ZA to 2:02:28.8 ... 2009-Apr-07 21:12:24 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.04 2009-Apr-07 21:12:24 LOG3 track_source: Calling 'track_source drift84p2 180.0 2.0413345349 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-07 21:12:24 START begin_task: Starting task 'sending tracking commands' 2009-Apr-07 21:12:24 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-07 21:12:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift84p2} INFO {Slewing to source 'drift84p2' ...} 2009-Apr-07 21:12:24 INFO1 track_source: Starting to track drift84p2 2009-Apr-07 21:12:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 21:12:24 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-07 21:12:24 LOG3 vw_send: To DATATAKING: set dec 2.0413345349 2009-Apr-07 21:12:24 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-07 21:12:24 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.0413345349 -CF 2009-Apr-07 21:12:24 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-07 21:12:24 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-07 21:12:24 LOG5 finish_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-07 21:12:24 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-07 21:12:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 21:12:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-07 21:12:24 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-07 21:12:24 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-07 21:12:24 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-07 21:12:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-07 21:12:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-07 21:12:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-07 21:12:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-07 21:12:24 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-07 21:12:24 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift84p2" 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: set dec 2.0413345349 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: vw% 2.0413345349 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.0413345349 -CF 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-07 21:12:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-07 21:12:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-07 21:12:25 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-07 21:12:25 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-07 21:12:25 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-07 21:12:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-07 21:12:25 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-07 21:12:25 LOG5 finish_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-07 21:12:25 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-07 21:12:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 21:12:25 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-07 21:12:25 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-07 21:12:25 START begin_task: Starting task 'waiting on telescope' 2009-Apr-07 21:12:25 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-07 21:12:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-07 21:12:25 LOG3 waittrk: Start waittrk 5 2009-Apr-07 21:12:25 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-07 21:12:25 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-07 21:12:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-07 21:12:30 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-07 21:12:30 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-07 21:12:30 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-07 21:12:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-07 21:12:58 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-07 21:12:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-07 21:12:58 INFO2 waittrk: Now tracking drift84p2 2009-Apr-07 21:12:58 LOG4 waittrk: Current telescope position: Az = 179.85 ZA = 2.05 2009-Apr-07 21:12:58 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-07 21:12:58 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-07 21:12:58 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-07 21:12:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-07 21:12:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-07 21:12:58 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-07 21:12:58 START begin_task: Starting task 'selecting calibration type' 2009-Apr-07 21:12:58 LOG5 begi