2008-Apr-30 23:28:53 BEGIN executive: CIMA executive starting ... 2008-Apr-30 23:28:53 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-30 23:28:53 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-29 17:36 2008-Apr-30 23:28:53 INFO4 executive: This is an ON-LINE session 2008-Apr-30 23:28:53 INFO4 executive: This is a REMOTE session 2008-Apr-30 23:28:53 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-30 23:28:53 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Brian Kent' 2008-Apr-30 23:28:53 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog' 2008-Apr-30 23:28:54 LOG2 log_preferences: Currently applied preferences: 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(dailylog) = general 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(displayformat) = long 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-30 23:28:54 LOG2 log_preferences: prefs(fontsize) = 3 2008-Apr-30 23:28:54 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-30 23:28:54 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Apr-30 23:28:54 ALERT executive: CIMA executive ready 2008-Apr-30 23:28:56 NOTE frontend: CIMA frontend ready 2008-Apr-30 23:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:28:58 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-30 23:29:04 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: tape stat 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-30 23:29:04 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:05 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-30 23:29:05 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-30 23:29:05 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-30 23:29:05 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-30 23:29:05 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-30 23:29:05 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-30 23:29:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-30 23:29:05 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-30 23:29:05 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-30 23:29:05 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-30 23:29:05 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-30 23:29:05 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-30 23:29:05 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-30 23:29:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:29:05 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-30 23:29:05 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-30 23:29:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-30 23:29:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-30 23:29:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:18 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-30 23:29:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:29:20 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-30 23:29:20 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-30 23:29:20 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-30 23:29:20 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-30 23:29:20 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-30 23:29:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-30 23:29:20 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-30 23:29:20 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-30 23:29:20 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-30 23:29:20 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-30 23:29:20 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-30 23:29:20 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-30 23:29:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-30 23:29:20 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-30 23:29:20 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-30 23:29:20 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-30 23:29:20 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-30 23:29:20 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-30 23:29:20 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-30 23:29:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:29:20 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-30 23:29:20 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-30 23:29:20 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-30 23:29:20 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-30 23:29:20 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-30 23:29:20 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-30 23:29:20 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-30 23:29:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-30 23:29:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:29:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:29:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:29:21 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-30 23:29:21 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-30 23:29:21 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-30 23:29:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:29:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:29:21 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-30 23:29:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:29:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:29:21 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-30 23:29:21 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-30 23:29:21 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-30 23:29:21 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-30 23:29:21 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-30 23:29:21 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-30 23:29:21 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-30 23:29:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-30 23:29:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-30 23:29:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-30 23:29:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-30 23:29:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-30 23:29:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-30 23:29:22 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-30 23:29:22 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-30 23:29:22 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-30 23:29:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-30 23:29:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:29:22 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-30 23:29:22 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-30 23:29:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:29:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-30 23:29:36 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-30 23:29:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-30 23:29:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-30 23:29:36 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-30 23:29:36 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-30 23:29:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:29:37 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-30 23:29:37 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-30 23:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-30 23:29:37 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-30 23:29:37 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-30 23:29:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-30 23:29:37 LOG5 begin_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-30 23:29:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-30 23:29:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-30 23:29:37 START begin_task: Starting task 'selecting calibration port' 2008-Apr-30 23:29:37 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-30 23:29:37 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-30 23:29:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-30 23:29:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:29:37 START begin_task: Starting task 'waiting on calport' 2008-Apr-30 23:29:37 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-30 23:29:37 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Apr-30 23:29:37 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-30 23:29:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:29:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:29:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-30 23:29:37 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-30 23:29:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-30 23:29:37 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-30 23:29:37 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-30 23:29:37 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-30 23:29:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:29:38 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-30 23:29:38 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-30 23:29:38 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-30 23:29:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:29:38 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:29:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:29:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 23:29:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:29:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:29:38 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:29:38 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-30 23:29:38 LOG5 finish_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-30 23:29:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:29:38 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-30 23:29:38 LOG5 end_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-30 23:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-30 23:29:38 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Apr-30 23:29:38 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Apr-30 23:29:38 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-30 23:29:38 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-30 23:29:38 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-30 23:29:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-30 23:29:38 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-30 23:29:38 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-30 23:29:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:29:38 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-30 23:29:38 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-30 23:29:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:29:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2010.0022.fits 2008-Apr-30 23:29:39 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080430.a2010.0022.fits} 2008-Apr-30 23:29:39 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Apr-30 23:29:48 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-30 23:29:48 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-30 23:29:48 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-30 23:29:48 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-30 23:29:48 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-30 23:29:48 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-30 23:29:48 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-30 23:29:48 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-30 23:29:48 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-30 23:29:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-30 23:29:49 LOG3 exec_msg: Closing socket 2008-Apr-30 23:29:49 LOG3 exec_msg: Closing socket 2008-Apr-30 23:29:49 LOG3 exec_msg: Closing socket 2008-Apr-30 23:29:49 LOG3 exec_msg: Closing socket 2008-Apr-30 23:29:52 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-30 23:29:52 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-30 23:29:52 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-30 23:29:52 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-30 23:30:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 23:30:02 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-30 23:30:03 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-30 23:30:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:30:05 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-30 23:30:05 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-30 23:30:05 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-30 23:30:05 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-30 23:30:05 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-30 23:30:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-30 23:30:05 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-30 23:30:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:30:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:30:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:30:05 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-30 23:30:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:30:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:30:05 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-30 23:30:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:30:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:30:05 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-30 23:30:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-30 23:30:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-30 23:30:05 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-30 23:30:05 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-30 23:30:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-30 23:30:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:05 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-30 23:30:05 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-30 23:30:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:30:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:30:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:30:05 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-30 23:30:05 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-30 23:30:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-30 23:30:05 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-30 23:30:05 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-30 23:30:05 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-30 23:30:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:30:05 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-30 23:30:05 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-30 23:30:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-30 23:30:06 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-30 23:30:06 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-30 23:30:06 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-30 23:30:06 LOG5 begin_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-30 23:30:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-30 23:30:06 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-30 23:30:06 START begin_task: Starting task 'selecting calibration port' 2008-Apr-30 23:30:06 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-30 23:30:06 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-30 23:30:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-30 23:30:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:06 START begin_task: Starting task 'waiting on calport' 2008-Apr-30 23:30:06 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-30 23:30:06 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Apr-30 23:30:06 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-30 23:30:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:30:06 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-30 23:30:06 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-30 23:30:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-30 23:30:06 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-30 23:30:06 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-30 23:30:06 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-30 23:30:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:30:06 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-30 23:30:06 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-30 23:30:06 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-30 23:30:06 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-30 23:30:06 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-30 23:30:06 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-30 23:30:06 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-30 23:30:06 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-30 23:30:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-30 23:30:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-30 23:30:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:30:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:30:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:30:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:30:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-30 23:30:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-30 23:30:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:30:07 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-30 23:30:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:30:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 23:30:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:30:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:30:07 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-30 23:30:07 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-30 23:30:07 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-30 23:30:07 LOG5 finish_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-30 23:30:07 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-30 23:30:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:30:07 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-30 23:30:07 LOG5 end_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-30 23:30:07 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-30 23:30:07 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Apr-30 23:30:07 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Apr-30 23:30:07 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-30 23:30:07 LOG5 begin_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-30 23:30:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-30 23:30:07 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-30 23:30:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-30 23:30:07 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-30 23:30:07 LOG5 finish_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-30 23:30:07 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-30 23:30:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:30:07 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-30 23:30:07 LOG5 end_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-30 23:30:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-30 23:30:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-30 23:30:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:30:08 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Apr-30 23:30:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 23:30:08 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-30 23:30:32 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-30 23:30:32 LOG4 exec_msg: From OBSERVER: track_new_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-30 23:30:32 LOG1 track_new_source: Calling 'track_new_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-30 23:30:32 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-30 23:30:32 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift3p1} INFO {Selecting source 'drift3p1' ...} 2008-Apr-30 23:30:32 LOG3 track_source: Calling 'track_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-30 23:30:32 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 23:30:32 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift3p1} INFO {Slewing to source 'drift3p1' ...} 2008-Apr-30 23:30:32 INFO1 track_source: Starting to track drift3p1 2008-Apr-30 23:30:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:30:32 LOG3 vw_send: To DATATAKING: set ra 134400.0 2008-Apr-30 23:30:32 LOG3 vw_send: To DATATAKING: set dec +003630 2008-Apr-30 23:30:32 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 23:30:32 LOG3 vw_send: To DATATAKING: pnt tr 134400.0 +003630 -CJ 2008-Apr-30 23:30:32 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:30:32 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 23:30:32 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 23:30:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:30:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 23:30:32 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-30 23:30:32 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-30 23:30:32 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-30 23:30:32 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-30 23:30:32 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-30 23:30:32 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-30 23:30:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:30:32 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-30 23:30:32 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-30 23:30:32 LOG5 finish_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 DONE finish_task: DONE finished selecting: new source 2008-Apr-30 23:30:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:30:32 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-30 23:30:32 LOG5 end_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: set ra 134400.0 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: set dec +003630 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: vw% 134400.0 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: vw% +003630 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: pnt tr 134400.0 +003630 -CJ 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-30 23:30:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:37 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-30 23:30:37 LOG4 exec_msg: From OBSERVER: track_new_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-30 23:30:37 LOG1 track_new_source: Calling 'track_new_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-30 23:30:37 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-30 23:30:37 LOG5 begin_task: Level: (1) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift3p1} INFO {Selecting source 'drift3p1' ...} 2008-Apr-30 23:30:37 LOG3 track_source: Calling 'track_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-30 23:30:37 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 23:30:37 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift3p1} INFO {Slewing to source 'drift3p1' ...} 2008-Apr-30 23:30:37 INFO1 track_source: Starting to track drift3p1 2008-Apr-30 23:30:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:30:37 LOG3 vw_send: To DATATAKING: set ra 134400.0 2008-Apr-30 23:30:37 LOG3 vw_send: To DATATAKING: set dec +003630 2008-Apr-30 23:30:37 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 23:30:37 LOG3 vw_send: To DATATAKING: pnt tr 134400.0 +003630 -CJ 2008-Apr-30 23:30:37 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:30:37 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 23:30:37 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 23:30:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:30:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 23:30:37 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-30 23:30:37 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-30 23:30:37 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-30 23:30:37 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-30 23:30:37 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-30 23:30:37 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-30 23:30:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:30:37 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-30 23:30:37 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-30 23:30:37 LOG5 finish_task: Level: (1) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 DONE finish_task: DONE finished selecting: new source 2008-Apr-30 23:30:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:30:37 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-30 23:30:37 LOG5 end_task: Level: (1) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: set ra 134400.0 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: set dec +003630 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: vw% 134400.0 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: vw% +003630 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: pnt tr 134400.0 +003630 -CJ 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-30 23:30:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-30 23:30:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:30:48 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-30 23:30:48 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-30 23:30:48 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-30 23:30:48 LOG5 begin_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-30 23:30:48 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-30 23:30:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-30 23:30:48 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-30 23:30:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:30:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:30:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:30:48 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-30 23:30:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:30:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:30:48 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-30 23:30:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:30:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:30:48 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-30 23:30:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-30 23:30:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-30 23:30:48 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-30 23:30:48 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-30 23:30:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-30 23:30:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:48 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-30 23:30:48 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-30 23:30:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:30:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:30:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:30:49 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-30 23:30:49 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-30 23:30:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-30 23:30:49 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-30 23:30:49 LOG5 finish_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-30 23:30:49 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-30 23:30:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:30:49 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-30 23:30:49 LOG5 end_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-30 23:30:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-30 23:30:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:30:53 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-30 23:30:53 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-30 23:30:53 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-30 23:30:53 LOG5 begin_task: Level: (1) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-30 23:30:53 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-30 23:30:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-30 23:30:53 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-30 23:30:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:30:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:30:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:30:53 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-30 23:30:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:30:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:30:53 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-30 23:30:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:30:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:30:53 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-30 23:30:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-30 23:30:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-30 23:30:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-30 23:30:53 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-30 23:30:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-30 23:30:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-30 23:30:53 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-30 23:30:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:30:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:30:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:30:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:30:53 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-30 23:30:53 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-30 23:30:53 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-30 23:30:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-30 23:30:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-30 23:30:54 LOG5 finish_task: Level: (1) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-30 23:30:54 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-30 23:30:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:30:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-30 23:30:54 LOG5 end_task: Level: (1) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-30 23:30:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-30 23:31:09 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-30 23:31:09 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-30 23:31:09 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-30 23:31:09 LOG5 begin_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-30 23:31:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-30 23:31:09 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-30 23:31:09 START begin_task: Starting task 'selecting calibration port' 2008-Apr-30 23:31:09 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-30 23:31:09 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-30 23:31:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-30 23:31:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:31:09 START begin_task: Starting task 'waiting on calport' 2008-Apr-30 23:31:09 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-30 23:31:09 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-30 23:31:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:31:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:31:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:31:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-30 23:31:09 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-30 23:31:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-30 23:31:09 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-30 23:31:09 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-30 23:31:09 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-30 23:31:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:31:09 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-30 23:31:09 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-30 23:31:09 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-30 23:31:09 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:10 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-30 23:31:10 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-30 23:31:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:31:10 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-30 23:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:31:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:31:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 23:31:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:31:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:31:10 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-30 23:31:10 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-30 23:31:10 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-30 23:31:10 LOG5 finish_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-30 23:31:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-30 23:31:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:31:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-30 23:31:10 LOG5 end_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-30 23:31:10 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-30 23:31:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-30 23:31:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-30 23:31:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-30 23:31:12 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-30 23:31:12 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-30 23:31:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-30 23:31:12 LOG5 begin_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-30 23:31:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-30 23:31:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-30 23:31:12 START begin_task: Starting task 'selecting calibration port' 2008-Apr-30 23:31:12 LOG5 begin_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-30 23:31:12 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-30 23:31:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-30 23:31:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:31:12 START begin_task: Starting task 'waiting on calport' 2008-Apr-30 23:31:12 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-30 23:31:12 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-30 23:31:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:31:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:31:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:31:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-30 23:31:12 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-30 23:31:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-30 23:31:12 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-30 23:31:12 LOG5 finish_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-30 23:31:12 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-30 23:31:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:31:13 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-30 23:31:13 LOG5 end_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:31:13 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-30 23:31:13 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-30 23:31:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:31:13 LOG5 begin_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-30 23:31:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:31:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:31:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 23:31:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:31:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:31:13 LOG5 end_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-30 23:31:13 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-30 23:31:13 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-30 23:31:13 LOG5 finish_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-30 23:31:13 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-30 23:31:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:31:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-30 23:31:13 LOG5 end_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-30 23:31:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-30 23:31:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-30 23:31:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-30 23:31:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:31:45 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-30 23:31:45 LOG4 exec_msg: From OBSERVER: track_new_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-30 23:31:45 LOG1 track_new_source: Calling 'track_new_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-30 23:31:45 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-30 23:31:45 LOG5 begin_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-30 23:31:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift3p1} INFO {Selecting source 'drift3p1' ...} 2008-Apr-30 23:31:45 LOG3 track_source: Calling 'track_source drift3p1 134400.0 +003630 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-30 23:31:45 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 23:31:45 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-30 23:31:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift3p1} INFO {Slewing to source 'drift3p1' ...} 2008-Apr-30 23:31:45 INFO1 track_source: Starting to track drift3p1 2008-Apr-30 23:31:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:31:45 LOG3 vw_send: To DATATAKING: set ra 134400.0 2008-Apr-30 23:31:45 LOG3 vw_send: To DATATAKING: set dec +003630 2008-Apr-30 23:31:45 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 23:31:45 LOG3 vw_send: To DATATAKING: pnt tr 134400.0 +003630 -CJ 2008-Apr-30 23:31:45 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:31:45 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 23:31:45 LOG5 finish_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-30 23:31:45 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 23:31:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:31:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 23:31:46 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-30 23:31:46 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-30 23:31:46 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-30 23:31:46 LOG5 begin_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-30 23:31:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-30 23:31:46 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-30 23:31:46 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-30 23:31:46 LOG5 finish_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-30 23:31:46 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-30 23:31:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:31:46 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-30 23:31:46 LOG5 end_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-30 23:31:46 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-30 23:31:46 LOG5 finish_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-30 23:31:46 DONE finish_task: DONE finished selecting: new source 2008-Apr-30 23:31:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:31:46 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-30 23:31:46 LOG5 end_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: set ra 134400.0 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: set dec +003630 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: vw% 134400.0 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: vw% +003630 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: pnt tr 134400.0 +003630 -CJ 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-30 23:31:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:32:52 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Apr-30 23:32:52 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Apr-30 23:32:52 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 23:32:52 LOG5 begin_task: Level: (1) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-30 23:32:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 23:32:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 23:32:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 23:32:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 23:32:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:32:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 23:32:53 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-30 23:32:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 23:32:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:32:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:32:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:32:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 23:32:55 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-30 23:32:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 23:32:55 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 23:32:55 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-30 23:32:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 23:32:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:32:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:32:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:32:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:32:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 23:32:56 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-30 23:32:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:32:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 23:32:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-30 23:32:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 23:32:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-30 23:32:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-30 23:32:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 23:32:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 23:32:56 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-30 23:32:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.917 0.982 ALFA beam 1: 0.927 0.942 2008-Apr-30 23:32:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.088 0.996 ALFA beam 3: 1.041 0.899 2008-Apr-30 23:32:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.000 1.046 ALFA beam 5: 1.046 0.943 2008-Apr-30 23:32:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.060 1.058 ALFA beam 7: 0.932 0.946 2008-Apr-30 23:32:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 23:32:56 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-30 23:32:56 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 23:32:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:32:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 23:32:56 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-30 23:32:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Apr-30 23:32:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 23:32:56 LOG5 finish_task: Level: (1) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-30 23:32:56 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 23:32:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-30 23:32:56 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 23:32:56 LOG5 end_task: Level: (1) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-30 23:33:08 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Apr-30 23:33:08 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift3p1 134400.0 +003630 J 0 Topocentric velocity(optical) 2008-Apr-30 23:33:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift3p1 134400.0 +003630 J 0 Topocentric velocity(optical)' 2008-Apr-30 23:33:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-30 23:33:08 LOG5 begin_task: Level: (1) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-30 23:33:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift3p1' 2008-Apr-30 23:33:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-30 23:33:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift3p1} 2008-Apr-30 23:33:08 INFO5 fixed_driftmap: Start: year = 2008.3339667148327 RA = 13:44:27.3 Dec = +00:33:47.5 2008-Apr-30 23:33:08 NOTE fixed_driftmap: Setting ZA to 17:47:26.2 ... 2008-Apr-30 23:33:08 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 17.79 2008-Apr-30 23:33:08 LOG3 track_source: Calling 'track_source drift3p1 360.0 17.7906086031 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-30 23:33:08 START begin_task: Starting task 'sending tracking commands' 2008-Apr-30 23:33:08 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-30 23:33:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift3p1} INFO {Slewing to source 'drift3p1' ...} 2008-Apr-30 23:33:08 INFO1 track_source: Starting to track drift3p1 2008-Apr-30 23:33:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:33:08 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Apr-30 23:33:08 LOG3 vw_send: To DATATAKING: set dec 17.7906086031 2008-Apr-30 23:33:08 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-30 23:33:08 LOG3 vw_send: To DATATAKING: pnt tr 360.0 17.7906086031 -CF 2008-Apr-30 23:33:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:33:08 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-30 23:33:08 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-30 23:33:08 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-30 23:33:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:33:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-30 23:33:08 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-30 23:33:08 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-30 23:33:08 LOG5 begin_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-30 23:33:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-30 23:33:09 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-30 23:33:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Apr-30 23:33:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-30 23:33:09 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-30 23:33:09 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift3p1" 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: set dec 17.7906086031 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: vw% 17.7906086031 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 17.7906086031 -CF 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-30 23:33:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:09 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-30 23:33:09 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-30 23:33:09 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-30 23:33:09 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-30 23:33:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 23:33:09 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-30 23:33:09 LOG5 finish_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-30 23:33:09 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-30 23:33:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:33:09 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-30 23:33:09 LOG5 end_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-30 23:33:09 START begin_task: Starting task 'waiting on telescope' 2008-Apr-30 23:33:09 LOG5 begin_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-30 23:33:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-30 23:33:10 LOG3 waittrk: Start waittrk 5 2008-Apr-30 23:33:10 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-30 23:33:10 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-30 23:33:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-30 23:33:15 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-30 23:33:15 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-30 23:33:15 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-30 23:33:23 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-30 23:33:23 INFO2 waittrk: Now tracking drift3p1 2008-Apr-30 23:33:23 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 17.77 2008-Apr-30 23:33:23 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-30 23:33:23 LOG5 finish_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-30 23:33:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:33:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-30 23:33:23 LOG5 end_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 23:33:23 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 23:33:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 23:33:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:33:23 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 23:33:23 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 23:33:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:33:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:33:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 23:33:23 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 23:33:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:33:23 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 23:33:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:33:23 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:33:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:33:23 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:33:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 23:33:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:33:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:33:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:33:23 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:33:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:33:23 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:33:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:33:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 23:33:23 LOG5 finish_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-30 23:33:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:33:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 23:33:23 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-30 23:33:23 LOG5 dopset_later: Calling 'dopset_later 20.070186488225968' 2008-Apr-30 23:33:23 INFO3 dopset_later: Setting Doppler correction for 23:33:43 (20.1 seconds from now) 2008-Apr-30 23:33:24 LOG5 antvel: Calling 'antvel 360.000000 17.790609 F 20.070186488225968' 2008-Apr-30 23:33:24 LOG2 antvel: Parameters to Doppler: Topocentric 99223 2008 121 0.0 2008-Apr-30 23:33:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-30 23:33:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Apr-30 23:33:24 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Apr-30 23:33:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-30 23:33:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-30 23:33:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:33:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:33:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 23:33:24 LOG5 begin_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-30 23:33:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-30 23:33:24 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-30 23:33:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-30 23:33:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-30 23:33:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:33:24 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-30 23:33:24 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-30 23:33:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-30 23:33:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-30 23:33:24 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-30 23:33:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:33:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:33:27 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-30 23:33:27 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-30 23:33:27 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-30 23:33:27 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-30 23:33:27 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:33:27 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:33:27 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:33:27 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-30 23:33:27 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-30 23:33:27 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-30 23:33:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:33:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-30 23:33:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-30 23:33:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-30 23:33:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-30 23:33:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-30 23:33:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-30 23:33:27 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.943 1.034 ALFA beam 1: 0.935 0.942 2008-Apr-30 23:33:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.084 0.997 ALFA beam 3: 1.040 0.899 2008-Apr-30 23:33:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.021 1.072 ALFA beam 5: 1.049 0.940 2008-Apr-30 23:33:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.082 1.088 ALFA beam 7: 0.944 0.969 2008-Apr-30 23:33:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 23:33:27 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-30 23:33:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:33:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 23:33:27 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 23:33:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-30 23:33:27 LOG5 finish_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-30 23:33:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:33:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-30 23:33:27 LOG5 end_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-30 23:33:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:33:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:33:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:33:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:33:28 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080430.a2010.0022.fits' is empty! 2008-Apr-30 23:33:28 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 13:44:27.3 LST = 13:44:11.2 diff = 16.1 secs 2008-Apr-30 23:33:28 INFO2 fixed_driftmap: Waiting 14.1 seconds for RA 13:44:27 2008-Apr-30 23:33:28 INFO2 lstwait: Waiting for 14.1 secs from LST 13:44:11 to LST 13:44:25 ... 2008-Apr-30 23:33:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.076197284387835 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-30 23:33:28 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-30 23:33:28 LOG5 begin_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-30 23:33:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:33:42 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-30 23:33:42 LOG5 end_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-30 23:33:42 LOG4 lstwait: Finished waiting, the gui caused difference: -0.074736159999844176 2008-Apr-30 23:33:42 INFO3 lstwait: Finished waiting 2008-Apr-30 23:33:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-30 23:33:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Apr-30 23:33:42 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-30 23:33:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-30 23:33:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 23:33:42 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 23:33:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:33:42 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-30 23:33:42 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-30 23:33:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 23:33:42 INFO2 take_spectra: Starting WAPP scan: 812100135 2008-Apr-30 23:33:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-30 23:33:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:33:42 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-30 23:33:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:33:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12823.00 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:40:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.968 > 1.4)! 2008-Apr-30 23:40:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.968 0.942 0.938 2008-Apr-30 23:40:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.012 1.045 0.904 2008-Apr-30 23:40:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.053 1.108 1.051 0.947 2008-Apr-30 23:40:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 1.091 0.947 0.972 2008-Apr-30 23:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.387 (still bad) 2008-Apr-30 23:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 7.399 (still bad) 2008-Apr-30 23:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.922 and 7.400 (still bad) 2008-Apr-30 23:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.932 and 7.394 (still bad) 2008-Apr-30 23:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.933 and 7.399 (still bad) 2008-Apr-30 23:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.932 and 7.403 (still bad) 2008-Apr-30 23:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.933 and 7.399 (still bad) 2008-Apr-30 23:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.933 and 7.394 (still bad) 2008-Apr-30 23:41:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.936 and 1.114 2008-Apr-30 23:42:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.430 > 1.4)! 2008-Apr-30 23:42:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.430 0.949 0.948 2008-Apr-30 23:42:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.009 1.047 0.906 2008-Apr-30 23:42:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.035 1.085 1.053 0.950 2008-Apr-30 23:42:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.095 0.949 0.977 2008-Apr-30 23:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.411 (still bad) 2008-Apr-30 23:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 5.794 (still bad) 2008-Apr-30 23:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 4.376 (still bad) 2008-Apr-30 23:42:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.263 2008-Apr-30 23:42:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.863 > 1.4)! 2008-Apr-30 23:42:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.863 0.949 0.949 2008-Apr-30 23:42:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.008 1.046 0.905 2008-Apr-30 23:42:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 1.085 1.054 0.948 2008-Apr-30 23:42:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.096 0.953 0.978 2008-Apr-30 23:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.462 (still bad) 2008-Apr-30 23:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.472 (still bad) 2008-Apr-30 23:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.458 (still bad) 2008-Apr-30 23:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.484 (still bad) 2008-Apr-30 23:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 6.295 (still bad) 2008-Apr-30 23:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 6.005 (still bad) 2008-Apr-30 23:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.507 (still bad) 2008-Apr-30 23:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.512 (still bad) 2008-Apr-30 23:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.518 (still bad) 2008-Apr-30 23:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.498 (still bad) 2008-Apr-30 23:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.500 (still bad) 2008-Apr-30 23:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.503 (still bad) 2008-Apr-30 23:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.501 (still bad) 2008-Apr-30 23:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.095 (still bad) 2008-Apr-30 23:43:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.094 2008-Apr-30 23:43:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.445 > 1.4)! 2008-Apr-30 23:43:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 7.445 0.946 0.947 2008-Apr-30 23:43:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.010 1.044 0.906 2008-Apr-30 23:43:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 1.086 1.053 0.949 2008-Apr-30 23:43:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.094 0.950 0.975 2008-Apr-30 23:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.437 (still bad) 2008-Apr-30 23:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.443 (still bad) 2008-Apr-30 23:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.455 (still bad) 2008-Apr-30 23:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.460 (still bad) 2008-Apr-30 23:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.452 (still bad) 2008-Apr-30 23:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.455 (still bad) 2008-Apr-30 23:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.465 (still bad) 2008-Apr-30 23:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.458 (still bad) 2008-Apr-30 23:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.445 (still bad) 2008-Apr-30 23:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.450 (still bad) 2008-Apr-30 23:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.448 (still bad) 2008-Apr-30 23:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.426 (still bad) 2008-Apr-30 23:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.441 (still bad) 2008-Apr-30 23:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.426 (still bad) 2008-Apr-30 23:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.450 (still bad) 2008-Apr-30 23:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.439 (still bad) 2008-Apr-30 23:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.452 (still bad) 2008-Apr-30 23:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.437 (still bad) 2008-Apr-30 23:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.428 (still bad) 2008-Apr-30 23:43:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 23:43:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 23:43:43 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-30 23:43:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 23:43:43 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-30 23:43:43 LOG1 fixed_driftmap: New position: year = 2008.3339868367684 RA = 13:54:02.1 RA/Dec = 13:54:29.4 +00:33:50.6 2008-Apr-30 23:43:43 NOTE fixed_driftmap: Correcting ZA to 17:47:23.1 ... 2008-Apr-30 23:43:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7897413234 -CF 2008-Apr-30 23:43:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-30 23:43:43 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 23:43:43 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-30 23:43:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 23:43:43 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-30 23:43:43 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 23:43:43 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-30 23:43:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 23:43:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 23:43:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:43:43 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 23:43:43 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-30 23:43:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7897413234 -CF 2008-Apr-30 23:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.378 (still bad) 2008-Apr-30 23:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:43:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 23:43:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:43:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:43:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 23:43:43 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-30 23:43:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 23:43:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:43:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 23:43:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:43:43 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-30 23:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:43:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:43:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:43:44 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:43:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 23:43:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:43:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:43:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:43:44 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:43:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:43:44 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:43:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:43:44 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 23:43:44 LOG5 finish_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 23:43:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:43:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 23:43:44 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 23:43:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 23:43:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 23:43:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:43:44 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:43:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 23:43:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:43:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:43:44 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 23:43:44 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-30 23:43:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:43:44 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-30 23:43:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 23:43:44 INFO2 take_spectra: Starting WAPP scan: 812100136 2008-Apr-30 23:43:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-30 23:43:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:43:44 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-30 23:43:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:43:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13425.00 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 23:43:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 23:43:46 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-30 23:43:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 23:43:46 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-30 23:43:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 23:43:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 23:43:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 23:43:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:43:46 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-30 23:43:46 INFO5 check_wapp_levels: WAPP power levels are between 1.211 and 9.799 (still bad) 2008-Apr-30 23:43:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:43:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 23:43:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:43:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:43:46 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-30 23:43:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 23:43:46 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 23:43:46 LOG5 finish_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-30 23:43:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 23:43:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:43:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 23:43:46 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-30 23:43:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Apr-30 23:43:46 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-30 23:43:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:43:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:43:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:43:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:43:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-30 23:43:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 23:43:47 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 23:43:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:43:47 LOG5 begin_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-30 23:43:47 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-30 23:43:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 23:43:47 INFO2 take_spectra: Starting WAPP scan: 812100137 2008-Apr-30 23:43:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-30 23:43:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:43:47 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-30 23:43:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:43:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:43:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2010.0023.fits 2008-Apr-30 23:43:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13428.00 2008-Apr-30 23:43:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2010.0023.fits} 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.417 (still bad) 2008-Apr-30 23:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 7.414 (still bad) 2008-Apr-30 23:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 7.402 (still bad) 2008-Apr-30 23:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 7.413 (still bad) 2008-Apr-30 23:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 7.407 (still bad) 2008-Apr-30 23:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.409 (still bad) 2008-Apr-30 23:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.405 (still bad) 2008-Apr-30 23:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.419 (still bad) 2008-Apr-30 23:44:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.410 > 1.4)! 2008-Apr-30 23:44:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 7.410 0.942 0.953 2008-Apr-30 23:44:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.009 1.045 0.906 2008-Apr-30 23:44:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.030 1.084 1.054 0.950 2008-Apr-30 23:44:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.096 0.954 0.979 2008-Apr-30 23:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.403 (still bad) 2008-Apr-30 23:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.399 (still bad) 2008-Apr-30 23:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.391 (still bad) 2008-Apr-30 23:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.376 (still bad) 2008-Apr-30 23:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.388 (still bad) 2008-Apr-30 23:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.381 (still bad) 2008-Apr-30 23:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.379 (still bad) 2008-Apr-30 23:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.394 (still bad) 2008-Apr-30 23:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.389 (still bad) 2008-Apr-30 23:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.388 (still bad) 2008-Apr-30 23:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.392 (still bad) 2008-Apr-30 23:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.388 (still bad) 2008-Apr-30 23:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.411 (still bad) 2008-Apr-30 23:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.396 (still bad) 2008-Apr-30 23:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.407 (still bad) 2008-Apr-30 23:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.403 (still bad) 2008-Apr-30 23:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.390 (still bad) 2008-Apr-30 23:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.385 (still bad) 2008-Apr-30 23:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.368 (still bad) 2008-Apr-30 23:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.393 (still bad) 2008-Apr-30 23:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.401 (still bad) 2008-Apr-30 23:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.417 (still bad) 2008-Apr-30 23:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.393 (still bad) 2008-Apr-30 23:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.373 (still bad) 2008-Apr-30 23:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.375 (still bad) 2008-Apr-30 23:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.364 (still bad) 2008-Apr-30 23:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.374 (still bad) 2008-Apr-30 23:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 7.384 (still bad) 2008-Apr-30 23:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 7.410 (still bad) 2008-Apr-30 23:45:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.408 > 1.4)! 2008-Apr-30 23:45:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 7.408 0.928 0.938 2008-Apr-30 23:45:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 1.043 1.058 0.917 2008-Apr-30 23:45:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.080 1.061 0.957 2008-Apr-30 23:45:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.094 0.949 0.977 2008-Apr-30 23:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.919 and 7.398 (still bad) 2008-Apr-30 23:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 7.385 (still bad) 2008-Apr-30 23:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 7.373 (still bad) 2008-Apr-30 23:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 7.356 (still bad) 2008-Apr-30 23:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.337 (still bad) 2008-Apr-30 23:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.351 (still bad) 2008-Apr-30 23:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.346 (still bad) 2008-Apr-30 23:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.371 (still bad) 2008-Apr-30 23:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.358 (still bad) 2008-Apr-30 23:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.372 (still bad) 2008-Apr-30 23:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.373 (still bad) 2008-Apr-30 23:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.357 (still bad) 2008-Apr-30 23:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 7.355 (still bad) 2008-Apr-30 23:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 7.371 (still bad) 2008-Apr-30 23:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 7.352 (still bad) 2008-Apr-30 23:45:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.383 2008-Apr-30 23:45:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.429 > 1.4)! 2008-Apr-30 23:45:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.429 0.945 0.943 2008-Apr-30 23:45:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.009 1.056 0.912 2008-Apr-30 23:45:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.078 1.053 0.947 2008-Apr-30 23:45:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.093 0.948 0.974 2008-Apr-30 23:45:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.329 2008-Apr-30 23:45:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.525 > 1.4)! 2008-Apr-30 23:45:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.525 0.948 0.945 2008-Apr-30 23:45:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.009 1.050 0.909 2008-Apr-30 23:45:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.080 1.052 0.945 2008-Apr-30 23:45:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.093 0.948 0.974 2008-Apr-30 23:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 1.561 (still bad) 2008-Apr-30 23:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.588 (still bad) 2008-Apr-30 23:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.589 (still bad) 2008-Apr-30 23:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.594 (still bad) 2008-Apr-30 23:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.599 (still bad) 2008-Apr-30 23:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.466 (still bad) 2008-Apr-30 23:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.531 (still bad) 2008-Apr-30 23:46:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.398 2008-Apr-30 23:46:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.462 > 1.4)! 2008-Apr-30 23:46:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.462 0.938 0.944 2008-Apr-30 23:46:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.005 1.046 0.904 2008-Apr-30 23:46:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.081 1.051 0.947 2008-Apr-30 23:46:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.092 0.947 0.974 2008-Apr-30 23:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.474 (still bad) 2008-Apr-30 23:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.518 (still bad) 2008-Apr-30 23:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.510 (still bad) 2008-Apr-30 23:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.424 (still bad) 2008-Apr-30 23:46:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.366 2008-Apr-30 23:46:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.401 > 1.4)! 2008-Apr-30 23:46:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.401 0.938 0.944 2008-Apr-30 23:46:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.003 1.044 0.905 2008-Apr-30 23:46:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.079 1.054 0.946 2008-Apr-30 23:46:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.091 0.948 0.973 2008-Apr-30 23:46:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.394 2008-Apr-30 23:46:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.405 > 1.4)! 2008-Apr-30 23:46:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.405 0.934 0.944 2008-Apr-30 23:46:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.005 1.045 0.904 2008-Apr-30 23:46:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.080 1.048 0.947 2008-Apr-30 23:46:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.092 0.949 0.974 2008-Apr-30 23:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.414 (still bad) 2008-Apr-30 23:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.419 (still bad) 2008-Apr-30 23:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.426 (still bad) 2008-Apr-30 23:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.437 (still bad) 2008-Apr-30 23:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.432 (still bad) 2008-Apr-30 23:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.430 (still bad) 2008-Apr-30 23:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.421 (still bad) 2008-Apr-30 23:46:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.368 2008-Apr-30 23:46:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.440 > 1.4)! 2008-Apr-30 23:46:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.440 0.944 0.945 2008-Apr-30 23:46:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.005 1.045 0.904 2008-Apr-30 23:46:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.080 1.053 0.947 2008-Apr-30 23:46:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.095 0.951 0.977 2008-Apr-30 23:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.434 (still bad) 2008-Apr-30 23:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.430 (still bad) 2008-Apr-30 23:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.430 (still bad) 2008-Apr-30 23:46:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.272 2008-Apr-30 23:47:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.406 > 1.4)! 2008-Apr-30 23:47:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.406 0.945 0.950 2008-Apr-30 23:47:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.006 1.046 0.906 2008-Apr-30 23:47:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.083 1.054 0.947 2008-Apr-30 23:47:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 1.119 0.972 0.997 2008-Apr-30 23:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.401 (still bad) 2008-Apr-30 23:47:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.397 2008-Apr-30 23:53:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 23:53:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 23:53:48 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-30 23:53:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 23:53:48 LOG5 end_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-30 23:53:48 LOG1 fixed_driftmap: New position: year = 2008.3340060080616 RA = 14:04:08.7 RA/Dec = 14:04:36.1 +00:33:54.1 2008-Apr-30 23:53:48 NOTE fixed_driftmap: Correcting ZA to 17:47:19.6 ... 2008-Apr-30 23:53:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7887849401 -CF 2008-Apr-30 23:53:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-30 23:53:48 START begin_task: Starting task 'WAPP calibration' 2008-Apr-30 23:53:48 LOG5 begin_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-30 23:53:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-30 23:53:48 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-30 23:53:48 START begin_task: Starting task 'selecting calibration type' 2008-Apr-30 23:53:48 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-30 23:53:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-30 23:53:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-30 23:53:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:53:48 START begin_task: Starting task 'waiting on setcal' 2008-Apr-30 23:53:48 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-30 23:53:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7887849401 -CF 2008-Apr-30 23:53:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:53:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-30 23:53:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-30 23:53:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:53:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-30 23:53:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-30 23:53:48 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-30 23:53:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:53:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-30 23:53:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:53:49 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:53:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:53:49 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:53:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-30 23:53:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-30 23:53:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:53:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-30 23:53:49 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-30 23:53:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-30 23:53:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-30 23:53:49 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-30 23:53:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-30 23:53:49 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-30 23:53:49 LOG5 finish_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-30 23:53:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:53:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-30 23:53:49 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-30 23:53:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-30 23:53:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-30 23:53:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:53:49 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:53:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-30 23:53:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:53:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:53:49 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-30 23:53:49 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-30 23:53:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:53:49 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-30 23:53:49 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-30 23:53:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 23:53:49 INFO2 take_spectra: Starting WAPP scan: 812100138 2008-Apr-30 23:53:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-30 23:53:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:53:50 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-30 23:53:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:53:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14031.00 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-30 23:53:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-30 23:53:52 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-30 23:53:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-30 23:53:52 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-30 23:53:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-30 23:53:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-30 23:53:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-30 23:53:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-30 23:53:52 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-30 23:53:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-30 23:53:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-30 23:53:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-30 23:53:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-30 23:53:52 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-30 23:53:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-30 23:53:52 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-30 23:53:52 LOG5 finish_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-30 23:53:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-30 23:53:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-30 23:53:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-30 23:53:52 LOG5 end_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-30 23:53:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Apr-30 23:53:52 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Apr-30 23:53:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-Apr-30 23:53:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-Apr-30 23:53:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-Apr-30 23:53:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-Apr-30 23:53:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-30 23:53:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-30 23:53:53 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-30 23:53:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-30 23:53:53 LOG5 begin_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-30 23:53:53 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-30 23:53:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-30 23:53:53 INFO2 take_spectra: Starting WAPP scan: 812100139 2008-Apr-30 23:53:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-30 23:53:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-30 23:53:53 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-30 23:53:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-Apr-30 23:53:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-30 23:53:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20080430.a2010.0024.fits 2008-Apr-30 23:53:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14034.00 2008-Apr-30 23:53:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080430.a2010.0024.fits} 2008-Apr-30 23:53:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.501 > 1.4)! 2008-Apr-30 23:53:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.261 1.454 1.226 1.241 2008-Apr-30 23:53:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.451 1.359 1.407 1.205 2008-Apr-30 23:53:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.385 1.456 1.428 1.247 2008-Apr-30 23:53:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.501 1.500 1.306 1.338 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-Apr-30 23:53:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.150 2008-May-01 00:03:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:03:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:03:54 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-May-01 00:03:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:03:54 LOG5 end_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2008-May-01 00:03:54 LOG1 fixed_driftmap: New position: year = 2008.3340252110427 RA = 14:14:16.4 RA/Dec = 14:14:43.8 +00:33:57.8 2008-May-01 00:03:54 NOTE fixed_driftmap: Correcting ZA to 17:47:15.9 ... 2008-May-01 00:03:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7877457610 -CF 2008-May-01 00:03:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 00:03:54 START begin_task: Starting task 'WAPP calibration' 2008-May-01 00:03:54 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2008-May-01 00:03:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 00:03:54 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 00:03:54 START begin_task: Starting task 'selecting calibration type' 2008-May-01 00:03:54 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-May-01 00:03:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 00:03:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 00:03:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:03:54 START begin_task: Starting task 'waiting on setcal' 2008-May-01 00:03:54 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2008-May-01 00:03:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7877457610 -CF 2008-May-01 00:03:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:03:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 00:03:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:03:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:03:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 00:03:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 00:03:55 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2008-May-01 00:03:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 00:03:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:03:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 00:03:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:03:55 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-May-01 00:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:03:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:03:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:03:56 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2008-May-01 00:03:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:03:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 00:03:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:03:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 00:03:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:03:56 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-May-01 00:03:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:03:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:03:56 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-May-01 00:03:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:03:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 00:03:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 00:03:56 LOG5 finish_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-May-01 00:03:56 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 00:03:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:03:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 00:03:56 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-May-01 00:03:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 00:03:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 00:03:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 00:03:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:03:56 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-May-01 00:03:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:03:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 00:03:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:03:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:03:56 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-May-01 00:03:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 00:03:56 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 00:03:56 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:03:56 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-May-01 00:03:56 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 00:03:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:03:56 INFO2 take_spectra: Starting WAPP scan: 812200001 2008-May-01 00:03:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 00:03:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:03:57 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-May-01 00:03:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:03:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14638.00 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:03:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:03:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.456 > 1.4)! 2008-May-01 00:03:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.266 1.327 1.234 1.249 2008-May-01 00:03:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.456 1.361 1.416 1.210 2008-May-01 00:03:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.036 1.084 1.062 0.953 2008-May-01 00:03:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.097 0.956 0.978 2008-May-01 00:03:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:03:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:03:59 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-May-01 00:03:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:03:59 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-May-01 00:03:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 00:03:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 00:03:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 00:03:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:03:59 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-May-01 00:03:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:03:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 00:03:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:03:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:03:59 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-May-01 00:03:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 00:03:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 00:03:59 LOG5 finish_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2008-May-01 00:03:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 00:03:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:03:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 00:03:59 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2008-May-01 00:03:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-May-01 00:03:59 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-May-01 00:03:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 00:04:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 00:04:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 00:04:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 00:04:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 00:04:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 00:04:00 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 00:04:00 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:04:00 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2008-May-01 00:04:00 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 00:04:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:04:00 INFO2 take_spectra: Starting WAPP scan: 812200002 2008-May-01 00:04:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 00:04:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:04:00 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-May-01 00:04:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 00:04:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:04:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0000.fits 2008-May-01 00:04:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14641.00 2008-May-01 00:04:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0000.fits} 2008-May-01 00:04:01 INFO5 check_wapp_levels: WAPP power levels are between 1.210 and 1.507 (still bad) 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:04:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:04:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.097 2008-May-01 00:14:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:14:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:14:01 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-May-01 00:14:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:14:01 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2008-May-01 00:14:01 LOG1 fixed_driftmap: New position: year = 2008.3340444457119 RA = 14:24:25.1 RA/Dec = 14:24:52.4 +00:34:01.9 2008-May-01 00:14:01 NOTE fixed_driftmap: Correcting ZA to 17:47:11.9 ... 2008-May-01 00:14:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7866254109 -CF 2008-May-01 00:14:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 00:14:01 START begin_task: Starting task 'WAPP calibration' 2008-May-01 00:14:01 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-May-01 00:14:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 00:14:01 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 00:14:01 START begin_task: Starting task 'selecting calibration type' 2008-May-01 00:14:01 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-May-01 00:14:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 00:14:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 00:14:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:14:01 START begin_task: Starting task 'waiting on setcal' 2008-May-01 00:14:01 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-May-01 00:14:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7866254109 -CF 2008-May-01 00:14:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:14:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 00:14:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:14:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:14:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 00:14:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 00:14:02 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 00:14:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:14:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 00:14:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:14:02 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:14:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:14:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:14:02 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:14:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 00:14:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:14:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 00:14:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:14:02 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:14:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:14:02 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:14:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 00:14:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 00:14:02 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-May-01 00:14:02 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 00:14:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:14:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 00:14:02 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 00:14:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 00:14:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 00:14:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:14:02 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:14:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 00:14:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:14:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:14:02 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-May-01 00:14:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 00:14:02 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 00:14:02 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:14:02 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-May-01 00:14:02 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 00:14:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:14:02 INFO2 take_spectra: Starting WAPP scan: 812200003 2008-May-01 00:14:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 00:14:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:14:03 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-May-01 00:14:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:14:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15244.00 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:14:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:14:05 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-May-01 00:14:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:14:05 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-May-01 00:14:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 00:14:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 00:14:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 00:14:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:14:05 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-May-01 00:14:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:14:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 00:14:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:14:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:14:05 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-May-01 00:14:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 00:14:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 00:14:05 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-May-01 00:14:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 00:14:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:14:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 00:14:05 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-May-01 00:14:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-May-01 00:14:05 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-May-01 00:14:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 00:14:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 00:14:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 00:14:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 00:14:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 00:14:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 00:14:06 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 00:14:06 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:14:06 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-May-01 00:14:06 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 00:14:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:14:06 INFO2 take_spectra: Starting WAPP scan: 812200004 2008-May-01 00:14:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 00:14:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:14:06 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-May-01 00:14:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 00:14:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:14:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0001.fits 2008-May-01 00:14:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15247.00 2008-May-01 00:14:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0001.fits} 2008-May-01 00:14:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.574 > 1.4)! 2008-May-01 00:14:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.270 1.574 1.251 1.249 2008-May-01 00:14:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.455 1.359 1.415 1.212 2008-May-01 00:14:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.396 1.465 1.435 1.246 2008-May-01 00:14:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.503 1.496 1.309 1.334 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:14:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.155 2008-May-01 00:20:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.641 < 0.8)! 2008-May-01 00:20:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.641 0.934 0.937 2008-May-01 00:20:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.003 1.062 0.917 2008-May-01 00:20:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.084 1.055 0.948 2008-May-01 00:20:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.095 0.952 0.975 2008-May-01 00:20:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.135 2008-May-01 00:24:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:24:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:24:07 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-May-01 00:24:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:24:07 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2008-May-01 00:24:07 LOG1 fixed_driftmap: New position: year = 2008.3340636486932 RA = 14:34:32.7 RA/Dec = 14:35:00.1 +00:34:06.2 2008-May-01 00:24:07 NOTE fixed_driftmap: Correcting ZA to 17:47:07.5 ... 2008-May-01 00:24:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7854297810 -CF 2008-May-01 00:24:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 00:24:07 START begin_task: Starting task 'WAPP calibration' 2008-May-01 00:24:07 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-May-01 00:24:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 00:24:07 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 00:24:07 START begin_task: Starting task 'selecting calibration type' 2008-May-01 00:24:07 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-May-01 00:24:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 00:24:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 00:24:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:24:07 START begin_task: Starting task 'waiting on setcal' 2008-May-01 00:24:07 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-May-01 00:24:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7854297810 -CF 2008-May-01 00:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:24:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 00:24:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:24:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 00:24:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 00:24:07 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-May-01 00:24:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 00:24:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:24:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 00:24:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:24:08 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:24:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:24:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:24:08 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:24:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 00:24:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:24:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 00:24:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:24:08 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:24:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:24:08 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:24:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 00:24:08 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 00:24:08 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-May-01 00:24:08 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 00:24:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:24:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 00:24:08 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 00:24:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 00:24:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 00:24:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:24:08 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:24:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 00:24:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:24:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:24:08 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 00:24:08 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 00:24:08 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:24:08 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-May-01 00:24:08 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 00:24:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:24:08 INFO2 take_spectra: Starting WAPP scan: 812200005 2008-May-01 00:24:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 00:24:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:24:08 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-May-01 00:24:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:24:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15849.00 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:24:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:24:10 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-May-01 00:24:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:24:10 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-May-01 00:24:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 00:24:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 00:24:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 00:24:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:24:10 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-May-01 00:24:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:24:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 00:24:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:24:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:24:10 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-May-01 00:24:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 00:24:10 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 00:24:10 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-May-01 00:24:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 00:24:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:24:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 00:24:10 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-May-01 00:24:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-May-01 00:24:10 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-May-01 00:24:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 00:24:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 00:24:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 00:24:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 00:24:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 00:24:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 00:24:11 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 00:24:11 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:24:11 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-May-01 00:24:11 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 00:24:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:24:11 INFO2 take_spectra: Starting WAPP scan: 812200006 2008-May-01 00:24:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 00:24:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:24:11 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-May-01 00:24:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 00:24:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:24:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.505 > 1.4)! 2008-May-01 00:24:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.266 1.289 1.234 1.243 2008-May-01 00:24:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.466 1.369 1.412 1.206 2008-May-01 00:24:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.388 1.461 1.426 1.247 2008-May-01 00:24:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.505 1.499 1.308 1.335 2008-May-01 00:24:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15852.00 2008-May-01 00:24:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0002.fits 2008-May-01 00:24:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0002.fits} 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:24:13 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.505 (still bad) 2008-May-01 00:24:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.098 2008-May-01 00:34:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:34:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:34:12 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-May-01 00:34:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:34:12 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-May-01 00:34:12 LOG1 fixed_driftmap: New position: year = 2008.3340828199864 RA = 14:44:39.4 RA/Dec = 14:45:06.7 +00:34:10.7 2008-May-01 00:34:12 NOTE fixed_driftmap: Correcting ZA to 17:47:03.0 ... 2008-May-01 00:34:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7841615670 -CF 2008-May-01 00:34:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 00:34:12 START begin_task: Starting task 'WAPP calibration' 2008-May-01 00:34:12 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-May-01 00:34:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 00:34:12 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 00:34:12 START begin_task: Starting task 'selecting calibration type' 2008-May-01 00:34:12 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-May-01 00:34:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 00:34:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 00:34:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:34:12 START begin_task: Starting task 'waiting on setcal' 2008-May-01 00:34:12 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-May-01 00:34:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7841615670 -CF 2008-May-01 00:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:34:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 00:34:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:34:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 00:34:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 00:34:12 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2008-May-01 00:34:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 00:34:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:34:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 00:34:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:34:13 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:34:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:34:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:34:13 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:34:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 00:34:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:34:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 00:34:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:34:13 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:34:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:34:13 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:34:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 00:34:13 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 00:34:13 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-May-01 00:34:13 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 00:34:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:34:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 00:34:13 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 00:34:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 00:34:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 00:34:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:34:13 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:34:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 00:34:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:34:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:34:13 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 00:34:13 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 00:34:13 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:34:13 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-May-01 00:34:13 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 00:34:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:34:13 INFO2 take_spectra: Starting WAPP scan: 812200007 2008-May-01 00:34:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 00:34:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:34:13 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-May-01 00:34:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:34:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16454.00 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:34:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:34:15 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-May-01 00:34:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:34:15 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-May-01 00:34:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 00:34:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 00:34:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 00:34:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:34:15 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-May-01 00:34:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:34:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 00:34:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:34:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:34:15 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-May-01 00:34:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 00:34:15 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 00:34:15 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-May-01 00:34:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 00:34:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:34:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 00:34:15 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-May-01 00:34:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-May-01 00:34:15 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-May-01 00:34:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 00:34:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 00:34:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 00:34:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 00:34:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 00:34:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 00:34:16 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 00:34:16 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:34:16 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-May-01 00:34:16 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 00:34:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:34:16 INFO2 take_spectra: Starting WAPP scan: 812200008 2008-May-01 00:34:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 00:34:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:34:16 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-May-01 00:34:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 00:34:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:34:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.506 > 1.4)! 2008-May-01 00:34:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.267 1.424 1.223 1.234 2008-May-01 00:34:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.451 1.358 1.411 1.209 2008-May-01 00:34:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.386 1.463 1.431 1.248 2008-May-01 00:34:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.506 1.497 1.310 1.331 2008-May-01 00:34:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0003.fits 2008-May-01 00:34:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16457.00 2008-May-01 00:34:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0003.fits} 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:34:18 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.506 (still bad) 2008-May-01 00:34:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.125 2008-May-01 00:39:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.645 > 1.4)! 2008-May-01 00:39:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 1.645 0.948 0.944 2008-May-01 00:39:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.009 1.053 0.910 2008-May-01 00:39:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.085 1.060 0.949 2008-May-01 00:39:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.094 0.955 0.975 2008-May-01 00:39:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.846 and 1.097 2008-May-01 00:39:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (3.669 > 1.4)! 2008-May-01 00:39:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 3.669 0.961 0.947 2008-May-01 00:39:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.011 1.054 0.911 2008-May-01 00:39:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.082 1.065 0.948 2008-May-01 00:39:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.096 0.955 0.976 2008-May-01 00:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 4.713 (still bad) 2008-May-01 00:39:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.098 2008-May-01 00:39:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.8)! 2008-May-01 00:39:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.513 0.962 0.951 2008-May-01 00:39:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.011 1.052 0.911 2008-May-01 00:39:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 1.083 1.064 0.950 2008-May-01 00:39:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.095 0.955 0.976 2008-May-01 00:39:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.097 2008-May-01 00:39:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.428 > 1.4)! 2008-May-01 00:39:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 7.428 0.962 0.949 2008-May-01 00:39:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.010 1.052 0.910 2008-May-01 00:39:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 1.082 1.066 0.951 2008-May-01 00:39:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.097 0.956 0.976 2008-May-01 00:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.097 (still bad) 2008-May-01 00:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 4.287 (still bad) 2008-May-01 00:40:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.098 2008-May-01 00:40:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.598 < 0.8)! 2008-May-01 00:40:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.598 0.963 0.951 2008-May-01 00:40:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.009 1.053 0.910 2008-May-01 00:40:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.083 1.067 0.950 2008-May-01 00:40:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.097 0.954 0.976 2008-May-01 00:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.096 (still bad) 2008-May-01 00:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.096 (still bad) 2008-May-01 00:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 5.397 (still bad) 2008-May-01 00:40:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.098 2008-May-01 00:40:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.765 < 0.8)! 2008-May-01 00:40:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 0.765 0.962 0.951 2008-May-01 00:40:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.006 1.052 0.908 2008-May-01 00:40:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.081 1.065 0.948 2008-May-01 00:40:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.098 0.954 0.978 2008-May-01 00:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.099 (still bad) 2008-May-01 00:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.099 (still bad) 2008-May-01 00:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.099 (still bad) 2008-May-01 00:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.800 (still bad) 2008-May-01 00:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.790 and 1.098 (still bad) 2008-May-01 00:40:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.098 2008-May-01 00:40:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.653 < 0.8)! 2008-May-01 00:40:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 0.653 0.962 0.953 2008-May-01 00:40:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.008 1.052 0.909 2008-May-01 00:40:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.078 1.064 0.949 2008-May-01 00:40:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.098 0.956 0.977 2008-May-01 00:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.774 and 1.098 (still bad) 2008-May-01 00:40:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.908 and 1.127 2008-May-01 00:42:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.600 < 0.8)! 2008-May-01 00:42:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.600 0.939 0.947 2008-May-01 00:42:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.011 1.058 0.913 2008-May-01 00:42:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.080 1.059 0.947 2008-May-01 00:42:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.099 0.954 0.978 2008-May-01 00:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.098 (still bad) 2008-May-01 00:42:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.849 and 1.098 2008-May-01 00:44:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:44:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:44:17 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-May-01 00:44:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:44:17 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2008-May-01 00:44:17 LOG1 fixed_driftmap: New position: year = 2008.3341019912796 RA = 14:54:46.0 RA/Dec = 14:55:13.4 +00:34:15.5 2008-May-01 00:44:17 NOTE fixed_driftmap: Correcting ZA to 17:46:58.2 ... 2008-May-01 00:44:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7828213298 -CF 2008-May-01 00:44:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 00:44:17 START begin_task: Starting task 'WAPP calibration' 2008-May-01 00:44:17 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-May-01 00:44:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 00:44:17 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 00:44:17 START begin_task: Starting task 'selecting calibration type' 2008-May-01 00:44:17 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-May-01 00:44:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 00:44:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 00:44:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:44:17 START begin_task: Starting task 'waiting on setcal' 2008-May-01 00:44:17 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-May-01 00:44:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7828213298 -CF 2008-May-01 00:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:44:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 00:44:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:44:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 00:44:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 00:44:18 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 00:44:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:44:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 00:44:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:44:18 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:44:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:44:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:44:18 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:44:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 00:44:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:44:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 00:44:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:44:18 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:44:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:44:18 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:44:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 00:44:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 00:44:18 LOG5 finish_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-May-01 00:44:18 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 00:44:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:44:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 00:44:18 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 00:44:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 00:44:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 00:44:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:44:18 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:44:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 00:44:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:44:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:44:18 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 00:44:18 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 00:44:18 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:44:18 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-May-01 00:44:18 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 00:44:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:44:18 INFO2 take_spectra: Starting WAPP scan: 812200009 2008-May-01 00:44:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 00:44:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:44:18 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-May-01 00:44:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:44:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17059.00 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:44:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:44:20 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-May-01 00:44:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:44:20 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-May-01 00:44:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 00:44:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 00:44:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 00:44:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:44:20 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-May-01 00:44:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:44:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 00:44:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:44:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:44:20 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-May-01 00:44:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 00:44:20 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 00:44:20 LOG5 finish_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-May-01 00:44:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 00:44:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:44:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 00:44:20 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-May-01 00:44:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-May-01 00:44:21 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-May-01 00:44:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 00:44:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 00:44:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 00:44:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 00:44:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 00:44:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 00:44:21 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 00:44:21 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:44:21 LOG5 begin_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-May-01 00:44:21 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 00:44:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:44:21 INFO2 take_spectra: Starting WAPP scan: 812200010 2008-May-01 00:44:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 00:44:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:44:21 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-May-01 00:44:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 00:44:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:44:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17062.00 2008-May-01 00:44:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0004.fits 2008-May-01 00:44:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0004.fits} 2008-May-01 00:44:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.509 > 1.4)! 2008-May-01 00:44:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.280 1.249 1.241 1.254 2008-May-01 00:44:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.450 1.360 1.413 1.208 2008-May-01 00:44:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.388 1.462 1.435 1.251 2008-May-01 00:44:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.509 1.502 1.313 1.337 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.509 (still bad) 2008-May-01 00:44:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.099 2008-May-01 00:45:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.446 > 1.4)! 2008-May-01 00:45:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 7.446 0.951 0.945 2008-May-01 00:45:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.007 1.050 0.908 2008-May-01 00:45:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 1.080 1.058 0.950 2008-May-01 00:45:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.098 0.954 0.977 2008-May-01 00:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.456 (still bad) 2008-May-01 00:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.450 (still bad) 2008-May-01 00:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.448 (still bad) 2008-May-01 00:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.451 (still bad) 2008-May-01 00:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.433 (still bad) 2008-May-01 00:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.434 (still bad) 2008-May-01 00:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.442 (still bad) 2008-May-01 00:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.442 (still bad) 2008-May-01 00:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.434 (still bad) 2008-May-01 00:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.422 (still bad) 2008-May-01 00:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.429 (still bad) 2008-May-01 00:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.421 (still bad) 2008-May-01 00:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.435 (still bad) 2008-May-01 00:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.423 (still bad) 2008-May-01 00:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.435 (still bad) 2008-May-01 00:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.429 (still bad) 2008-May-01 00:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.430 (still bad) 2008-May-01 00:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.423 (still bad) 2008-May-01 00:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.421 (still bad) 2008-May-01 00:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.429 (still bad) 2008-May-01 00:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.418 (still bad) 2008-May-01 00:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.409 (still bad) 2008-May-01 00:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.394 (still bad) 2008-May-01 00:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.404 (still bad) 2008-May-01 00:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.397 (still bad) 2008-May-01 00:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.395 (still bad) 2008-May-01 00:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.386 (still bad) 2008-May-01 00:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.388 (still bad) 2008-May-01 00:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.389 (still bad) 2008-May-01 00:46:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.388 > 1.4)! 2008-May-01 00:46:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 7.388 0.932 0.941 2008-May-01 00:46:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.005 1.051 0.909 2008-May-01 00:46:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.079 1.057 0.947 2008-May-01 00:46:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.096 0.951 0.976 2008-May-01 00:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 7.392 (still bad) 2008-May-01 00:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.378 (still bad) 2008-May-01 00:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 7.377 (still bad) 2008-May-01 00:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.374 (still bad) 2008-May-01 00:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.377 (still bad) 2008-May-01 00:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.377 (still bad) 2008-May-01 00:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.377 (still bad) 2008-May-01 00:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.379 (still bad) 2008-May-01 00:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.359 (still bad) 2008-May-01 00:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.358 (still bad) 2008-May-01 00:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.362 (still bad) 2008-May-01 00:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.359 (still bad) 2008-May-01 00:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.343 (still bad) 2008-May-01 00:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.342 (still bad) 2008-May-01 00:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.348 (still bad) 2008-May-01 00:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.353 (still bad) 2008-May-01 00:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.352 (still bad) 2008-May-01 00:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.346 (still bad) 2008-May-01 00:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.357 (still bad) 2008-May-01 00:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.348 (still bad) 2008-May-01 00:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.360 (still bad) 2008-May-01 00:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.352 (still bad) 2008-May-01 00:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.339 (still bad) 2008-May-01 00:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.332 (still bad) 2008-May-01 00:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.344 (still bad) 2008-May-01 00:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.342 (still bad) 2008-May-01 00:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.346 (still bad) 2008-May-01 00:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 7.339 (still bad) 2008-May-01 00:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.328 (still bad) 2008-May-01 00:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.336 (still bad) 2008-May-01 00:47:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.335 > 1.4)! 2008-May-01 00:47:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 7.335 0.929 0.936 2008-May-01 00:47:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.006 1.053 0.909 2008-May-01 00:47:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.084 1.059 0.951 2008-May-01 00:47:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.099 0.955 0.980 2008-May-01 00:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 7.343 (still bad) 2008-May-01 00:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.453 (still bad) 2008-May-01 00:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.416 (still bad) 2008-May-01 00:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.554 (still bad) 2008-May-01 00:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.552 (still bad) 2008-May-01 00:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.558 (still bad) 2008-May-01 00:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.453 (still bad) 2008-May-01 00:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.483 (still bad) 2008-May-01 00:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.446 (still bad) 2008-May-01 00:47:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.236 2008-May-01 00:48:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.413 > 1.4)! 2008-May-01 00:48:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.413 0.953 0.947 2008-May-01 00:48:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.010 1.054 0.911 2008-May-01 00:48:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.089 1.061 0.951 2008-May-01 00:48:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.097 0.954 0.978 2008-May-01 00:48:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.312 2008-May-01 00:54:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:54:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:54:22 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-May-01 00:54:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:54:22 LOG5 end_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-May-01 00:54:22 LOG1 fixed_driftmap: New position: year = 2008.3341211625725 RA = 15:04:52.7 RA/Dec = 15:05:20.1 +00:34:20.6 2008-May-01 00:54:22 NOTE fixed_driftmap: Correcting ZA to 17:46:53.1 ... 2008-May-01 00:54:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7814116855 -CF 2008-May-01 00:54:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 00:54:22 START begin_task: Starting task 'WAPP calibration' 2008-May-01 00:54:22 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-May-01 00:54:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 00:54:22 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 00:54:22 START begin_task: Starting task 'selecting calibration type' 2008-May-01 00:54:22 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-May-01 00:54:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 00:54:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 00:54:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:54:22 START begin_task: Starting task 'waiting on setcal' 2008-May-01 00:54:22 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-May-01 00:54:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7814116855 -CF 2008-May-01 00:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:54:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 00:54:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 00:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:54:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 00:54:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 00:54:23 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 00:54:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:54:23 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 00:54:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:54:23 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 00:54:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:54:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:54:23 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:54:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 00:54:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 00:54:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 00:54:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 00:54:23 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 00:54:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 00:54:23 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 00:54:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 00:54:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 00:54:23 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-May-01 00:54:23 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 00:54:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:54:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 00:54:23 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 00:54:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 00:54:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 00:54:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:54:23 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:54:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 00:54:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:54:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:54:23 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2008-May-01 00:54:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 00:54:23 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 00:54:23 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:54:23 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-May-01 00:54:23 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 00:54:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:54:23 INFO2 take_spectra: Starting WAPP scan: 812200011 2008-May-01 00:54:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 00:54:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:54:24 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-May-01 00:54:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:54:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17665.00 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 00:54:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 00:54:26 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-May-01 00:54:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 00:54:26 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-May-01 00:54:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 00:54:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 00:54:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 00:54:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 00:54:26 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-May-01 00:54:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 00:54:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 00:54:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 00:54:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 00:54:26 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-May-01 00:54:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 00:54:26 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 00:54:26 LOG5 finish_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-May-01 00:54:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 00:54:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 00:54:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 00:54:26 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-May-01 00:54:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-May-01 00:54:26 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-May-01 00:54:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 00:54:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 00:54:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 00:54:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 00:54:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 00:54:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 00:54:27 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 00:54:27 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 00:54:27 LOG5 begin_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-May-01 00:54:27 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 00:54:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 00:54:27 INFO2 take_spectra: Starting WAPP scan: 812200012 2008-May-01 00:54:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 00:54:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 00:54:27 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-May-01 00:54:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 00:54:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 00:54:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17668.00 2008-May-01 00:54:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0005.fits 2008-May-01 00:54:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0005.fits} 2008-May-01 00:54:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.505 > 1.4)! 2008-May-01 00:54:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.279 1.384 1.259 1.259 2008-May-01 00:54:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.462 1.358 1.421 1.211 2008-May-01 00:54:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.395 1.461 1.442 1.247 2008-May-01 00:54:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.505 1.501 1.309 1.337 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 00:54:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.099 2008-May-01 00:57:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.579 < 0.8)! 2008-May-01 00:57:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.579 0.953 0.946 2008-May-01 00:57:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.007 1.056 0.908 2008-May-01 00:57:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.086 1.063 0.948 2008-May-01 00:57:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 1.096 0.956 0.976 2008-May-01 00:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.104 (still bad) 2008-May-01 00:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.104 (still bad) 2008-May-01 00:57:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.103 2008-May-01 01:02:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.654 < 0.8)! 2008-May-01 01:02:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.654 0.946 0.943 2008-May-01 01:02:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.003 1.053 0.904 2008-May-01 01:02:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.080 1.059 0.946 2008-May-01 01:02:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.094 0.956 0.974 2008-May-01 01:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.099 (still bad) 2008-May-01 01:02:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.098 2008-May-01 01:02:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.378 > 1.4)! 2008-May-01 01:02:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 7.378 0.950 0.944 2008-May-01 01:02:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.000 1.052 0.905 2008-May-01 01:02:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.078 1.060 0.946 2008-May-01 01:02:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.094 0.956 0.974 2008-May-01 01:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.384 (still bad) 2008-May-01 01:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.376 (still bad) 2008-May-01 01:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.394 (still bad) 2008-May-01 01:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.402 (still bad) 2008-May-01 01:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.374 (still bad) 2008-May-01 01:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.381 (still bad) 2008-May-01 01:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.383 (still bad) 2008-May-01 01:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.385 (still bad) 2008-May-01 01:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.389 (still bad) 2008-May-01 01:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.380 (still bad) 2008-May-01 01:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.383 (still bad) 2008-May-01 01:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.371 (still bad) 2008-May-01 01:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.372 (still bad) 2008-May-01 01:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.375 (still bad) 2008-May-01 01:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.369 (still bad) 2008-May-01 01:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.357 (still bad) 2008-May-01 01:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.357 (still bad) 2008-May-01 01:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.360 (still bad) 2008-May-01 01:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.347 (still bad) 2008-May-01 01:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.358 (still bad) 2008-May-01 01:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.346 (still bad) 2008-May-01 01:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.329 (still bad) 2008-May-01 01:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.330 (still bad) 2008-May-01 01:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.345 (still bad) 2008-May-01 01:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.345 (still bad) 2008-May-01 01:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.328 (still bad) 2008-May-01 01:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.329 (still bad) 2008-May-01 01:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.313 (still bad) 2008-May-01 01:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.312 (still bad) 2008-May-01 01:03:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.309 > 1.4)! 2008-May-01 01:03:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 7.309 0.932 0.934 2008-May-01 01:03:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 0.999 1.053 0.905 2008-May-01 01:03:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.081 1.058 0.947 2008-May-01 01:03:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.093 0.954 0.974 2008-May-01 01:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.303 (still bad) 2008-May-01 01:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.321 (still bad) 2008-May-01 01:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.315 (still bad) 2008-May-01 01:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.308 (still bad) 2008-May-01 01:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.299 (still bad) 2008-May-01 01:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.295 (still bad) 2008-May-01 01:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.293 (still bad) 2008-May-01 01:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.300 (still bad) 2008-May-01 01:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.294 (still bad) 2008-May-01 01:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.302 (still bad) 2008-May-01 01:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.306 (still bad) 2008-May-01 01:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.310 (still bad) 2008-May-01 01:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.318 (still bad) 2008-May-01 01:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.310 (still bad) 2008-May-01 01:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.310 (still bad) 2008-May-01 01:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.304 (still bad) 2008-May-01 01:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.292 (still bad) 2008-May-01 01:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.274 (still bad) 2008-May-01 01:04:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:04:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:04:28 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-May-01 01:04:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:04:28 LOG5 end_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-May-01 01:04:28 LOG1 fixed_driftmap: New position: year = 2008.3341403655538 RA = 15:15:00.4 RA/Dec = 15:15:27.7 +00:34:25.9 2008-May-01 01:04:28 NOTE fixed_driftmap: Correcting ZA to 17:46:47.8 ... 2008-May-01 01:04:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7799328799 -CF 2008-May-01 01:04:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 01:04:28 START begin_task: Starting task 'WAPP calibration' 2008-May-01 01:04:28 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-May-01 01:04:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 01:04:28 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 01:04:28 START begin_task: Starting task 'selecting calibration type' 2008-May-01 01:04:28 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-May-01 01:04:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 01:04:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 01:04:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:04:28 START begin_task: Starting task 'waiting on setcal' 2008-May-01 01:04:28 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-May-01 01:04:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7799328799 -CF 2008-May-01 01:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:04:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 01:04:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:04:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 01:04:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 01:04:28 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2008-May-01 01:04:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 01:04:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:04:29 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 01:04:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:04:29 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-May-01 01:04:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:04:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:04:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:04:29 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-May-01 01:04:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:04:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 01:04:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:04:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 01:04:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:04:29 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-May-01 01:04:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:04:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:04:29 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-May-01 01:04:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:04:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 01:04:29 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 01:04:29 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-May-01 01:04:29 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 01:04:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:04:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 01:04:29 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-May-01 01:04:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 01:04:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 01:04:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 01:04:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:04:29 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-May-01 01:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.273 (still bad) 2008-May-01 01:04:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:04:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 01:04:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:04:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:04:29 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2008-May-01 01:04:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 01:04:29 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 01:04:29 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:04:29 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-May-01 01:04:29 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 01:04:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:04:29 INFO2 take_spectra: Starting WAPP scan: 812200013 2008-May-01 01:04:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 01:04:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:04:29 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-May-01 01:04:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:04:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18270.00 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:04:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:04:31 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-May-01 01:04:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:04:31 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-May-01 01:04:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 01:04:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 01:04:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 01:04:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:04:31 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-May-01 01:04:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:04:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 01:04:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:04:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:04:31 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-May-01 01:04:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 01:04:31 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 01:04:31 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-May-01 01:04:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 01:04:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:04:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 01:04:31 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-May-01 01:04:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-May-01 01:04:31 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-May-01 01:04:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 01:04:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 01:04:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 01:04:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 01:04:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 01:04:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 01:04:32 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 01:04:32 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:04:32 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-May-01 01:04:32 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 01:04:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:04:32 INFO2 take_spectra: Starting WAPP scan: 812200014 2008-May-01 01:04:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 01:04:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:04:32 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-May-01 01:04:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 01:04:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:04:32 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 9.600 (still bad) 2008-May-01 01:04:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0006.fits 2008-May-01 01:04:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18273.00 2008-May-01 01:04:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0006.fits} 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:04:34 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 9.600 (still bad) 2008-May-01 01:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.282 (still bad) 2008-May-01 01:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.281 (still bad) 2008-May-01 01:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.281 (still bad) 2008-May-01 01:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.261 (still bad) 2008-May-01 01:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.265 (still bad) 2008-May-01 01:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.265 (still bad) 2008-May-01 01:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.262 (still bad) 2008-May-01 01:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.266 (still bad) 2008-May-01 01:04:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.265 > 1.4)! 2008-May-01 01:04:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 7.265 0.926 0.928 2008-May-01 01:04:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.000 1.053 0.905 2008-May-01 01:04:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 1.082 1.057 0.946 2008-May-01 01:04:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.093 0.956 0.973 2008-May-01 01:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.258 (still bad) 2008-May-01 01:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.270 (still bad) 2008-May-01 01:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.267 (still bad) 2008-May-01 01:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.275 (still bad) 2008-May-01 01:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.270 (still bad) 2008-May-01 01:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.258 (still bad) 2008-May-01 01:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.247 (still bad) 2008-May-01 01:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.263 (still bad) 2008-May-01 01:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.257 (still bad) 2008-May-01 01:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.252 (still bad) 2008-May-01 01:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.232 (still bad) 2008-May-01 01:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.239 (still bad) 2008-May-01 01:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.244 (still bad) 2008-May-01 01:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.255 (still bad) 2008-May-01 01:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.256 (still bad) 2008-May-01 01:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.248 (still bad) 2008-May-01 01:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.228 (still bad) 2008-May-01 01:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.243 (still bad) 2008-May-01 01:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.231 (still bad) 2008-May-01 01:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.229 (still bad) 2008-May-01 01:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.238 (still bad) 2008-May-01 01:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.254 (still bad) 2008-May-01 01:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.249 (still bad) 2008-May-01 01:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.236 (still bad) 2008-May-01 01:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.238 (still bad) 2008-May-01 01:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.228 (still bad) 2008-May-01 01:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.224 (still bad) 2008-May-01 01:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.213 (still bad) 2008-May-01 01:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.217 (still bad) 2008-May-01 01:05:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.228 > 1.4)! 2008-May-01 01:05:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 7.228 0.925 0.927 2008-May-01 01:05:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 0.998 1.055 0.905 2008-May-01 01:05:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.035 1.083 1.055 0.947 2008-May-01 01:05:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.090 0.956 0.971 2008-May-01 01:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.221 (still bad) 2008-May-01 01:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.237 (still bad) 2008-May-01 01:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.227 (still bad) 2008-May-01 01:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.229 (still bad) 2008-May-01 01:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.213 (still bad) 2008-May-01 01:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.224 (still bad) 2008-May-01 01:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.224 (still bad) 2008-May-01 01:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.231 (still bad) 2008-May-01 01:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.208 (still bad) 2008-May-01 01:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.217 (still bad) 2008-May-01 01:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.199 (still bad) 2008-May-01 01:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.208 (still bad) 2008-May-01 01:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.213 (still bad) 2008-May-01 01:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.210 (still bad) 2008-May-01 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 7.211 (still bad) 2008-May-01 01:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.207 (still bad) 2008-May-01 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.195 (still bad) 2008-May-01 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.200 (still bad) 2008-May-01 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.198 (still bad) 2008-May-01 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.195 (still bad) 2008-May-01 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.206 (still bad) 2008-May-01 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.211 (still bad) 2008-May-01 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.205 (still bad) 2008-May-01 01:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.206 (still bad) 2008-May-01 01:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.213 (still bad) 2008-May-01 01:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.197 (still bad) 2008-May-01 01:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.206 (still bad) 2008-May-01 01:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.188 (still bad) 2008-May-01 01:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.203 (still bad) 2008-May-01 01:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.197 (still bad) 2008-May-01 01:06:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.199 > 1.4)! 2008-May-01 01:06:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 7.199 0.925 0.925 2008-May-01 01:06:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 0.999 1.052 0.903 2008-May-01 01:06:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.075 1.055 0.945 2008-May-01 01:06:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.090 0.954 0.971 2008-May-01 01:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.202 (still bad) 2008-May-01 01:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.212 (still bad) 2008-May-01 01:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.202 (still bad) 2008-May-01 01:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.198 (still bad) 2008-May-01 01:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.200 (still bad) 2008-May-01 01:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.212 (still bad) 2008-May-01 01:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.201 (still bad) 2008-May-01 01:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.210 (still bad) 2008-May-01 01:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.208 (still bad) 2008-May-01 01:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.198 (still bad) 2008-May-01 01:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.228 (still bad) 2008-May-01 01:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 6.747 (still bad) 2008-May-01 01:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 5.160 (still bad) 2008-May-01 01:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 6.454 (still bad) 2008-May-01 01:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.370 (still bad) 2008-May-01 01:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.023 (still bad) 2008-May-01 01:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 3.778 (still bad) 2008-May-01 01:07:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.903 and 1.127 2008-May-01 01:07:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.034 > 1.4)! 2008-May-01 01:07:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 7.034 0.947 0.932 2008-May-01 01:07:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.000 1.053 0.904 2008-May-01 01:07:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.030 1.075 1.056 0.944 2008-May-01 01:07:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 1.091 0.955 0.973 2008-May-01 01:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.298 (still bad) 2008-May-01 01:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.417 (still bad) 2008-May-01 01:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.423 (still bad) 2008-May-01 01:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.423 (still bad) 2008-May-01 01:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.419 (still bad) 2008-May-01 01:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.396 (still bad) 2008-May-01 01:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.345 (still bad) 2008-May-01 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 6.069 (still bad) 2008-May-01 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 3.447 (still bad) 2008-May-01 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.146 (still bad) 2008-May-01 01:07:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.811 and 1.098 2008-May-01 01:07:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.356 > 1.4)! 2008-May-01 01:07:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 7.356 0.935 0.931 2008-May-01 01:07:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 0.998 1.052 0.903 2008-May-01 01:07:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.077 1.057 0.944 2008-May-01 01:07:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.088 0.955 0.970 2008-May-01 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.367 (still bad) 2008-May-01 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.378 (still bad) 2008-May-01 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.413 (still bad) 2008-May-01 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.099 (still bad) 2008-May-01 01:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.582 (still bad) 2008-May-01 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.099 (still bad) 2008-May-01 01:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.098 (still bad) 2008-May-01 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.097 (still bad) 2008-May-01 01:08:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.903 and 1.215 2008-May-01 01:08:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.386 > 1.4)! 2008-May-01 01:08:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 7.386 0.953 0.935 2008-May-01 01:08:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.999 1.053 0.903 2008-May-01 01:08:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.076 1.059 0.943 2008-May-01 01:08:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.090 0.956 0.972 2008-May-01 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.387 (still bad) 2008-May-01 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.387 (still bad) 2008-May-01 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 5.048 (still bad) 2008-May-01 01:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.426 (still bad) 2008-May-01 01:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.433 (still bad) 2008-May-01 01:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.435 (still bad) 2008-May-01 01:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.438 (still bad) 2008-May-01 01:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.417 (still bad) 2008-May-01 01:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.429 (still bad) 2008-May-01 01:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.423 (still bad) 2008-May-01 01:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.475 (still bad) 2008-May-01 01:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.472 (still bad) 2008-May-01 01:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.463 (still bad) 2008-May-01 01:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.481 (still bad) 2008-May-01 01:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.454 (still bad) 2008-May-01 01:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.455 (still bad) 2008-May-01 01:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.457 (still bad) 2008-May-01 01:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.453 (still bad) 2008-May-01 01:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.439 (still bad) 2008-May-01 01:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.433 (still bad) 2008-May-01 01:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.429 (still bad) 2008-May-01 01:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.422 (still bad) 2008-May-01 01:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.431 (still bad) 2008-May-01 01:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.424 (still bad) 2008-May-01 01:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.415 (still bad) 2008-May-01 01:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.418 (still bad) 2008-May-01 01:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.396 (still bad) 2008-May-01 01:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.392 (still bad) 2008-May-01 01:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.396 (still bad) 2008-May-01 01:09:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.402 > 1.4)! 2008-May-01 01:09:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 7.402 0.929 0.930 2008-May-01 01:09:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.999 1.052 0.903 2008-May-01 01:09:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.030 1.077 1.055 0.947 2008-May-01 01:09:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.090 0.955 0.970 2008-May-01 01:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.393 (still bad) 2008-May-01 01:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.386 (still bad) 2008-May-01 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.396 (still bad) 2008-May-01 01:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.387 (still bad) 2008-May-01 01:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.376 (still bad) 2008-May-01 01:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.384 (still bad) 2008-May-01 01:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.375 (still bad) 2008-May-01 01:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.392 (still bad) 2008-May-01 01:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.376 (still bad) 2008-May-01 01:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.368 (still bad) 2008-May-01 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.373 (still bad) 2008-May-01 01:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.376 (still bad) 2008-May-01 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.367 (still bad) 2008-May-01 01:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.353 (still bad) 2008-May-01 01:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.362 (still bad) 2008-May-01 01:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.351 (still bad) 2008-May-01 01:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.359 (still bad) 2008-May-01 01:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.336 (still bad) 2008-May-01 01:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.347 (still bad) 2008-May-01 01:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.355 (still bad) 2008-May-01 01:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.340 (still bad) 2008-May-01 01:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.344 (still bad) 2008-May-01 01:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.336 (still bad) 2008-May-01 01:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.332 (still bad) 2008-May-01 01:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.346 (still bad) 2008-May-01 01:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.334 (still bad) 2008-May-01 01:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.329 (still bad) 2008-May-01 01:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.342 (still bad) 2008-May-01 01:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.332 (still bad) 2008-May-01 01:10:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.328 > 1.4)! 2008-May-01 01:10:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 7.328 0.924 0.927 2008-May-01 01:10:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.000 1.052 0.905 2008-May-01 01:10:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.078 1.052 0.945 2008-May-01 01:10:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.092 0.953 0.971 2008-May-01 01:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.330 (still bad) 2008-May-01 01:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.336 (still bad) 2008-May-01 01:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.338 (still bad) 2008-May-01 01:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.321 (still bad) 2008-May-01 01:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.327 (still bad) 2008-May-01 01:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.330 (still bad) 2008-May-01 01:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.330 (still bad) 2008-May-01 01:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.321 (still bad) 2008-May-01 01:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.310 (still bad) 2008-May-01 01:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.319 (still bad) 2008-May-01 01:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.320 (still bad) 2008-May-01 01:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.305 (still bad) 2008-May-01 01:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.319 (still bad) 2008-May-01 01:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.302 (still bad) 2008-May-01 01:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.322 (still bad) 2008-May-01 01:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.317 (still bad) 2008-May-01 01:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.329 (still bad) 2008-May-01 01:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.321 (still bad) 2008-May-01 01:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.314 (still bad) 2008-May-01 01:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.314 (still bad) 2008-May-01 01:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.314 (still bad) 2008-May-01 01:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.309 (still bad) 2008-May-01 01:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.306 (still bad) 2008-May-01 01:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.316 (still bad) 2008-May-01 01:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.306 (still bad) 2008-May-01 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.300 (still bad) 2008-May-01 01:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.299 (still bad) 2008-May-01 01:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.303 (still bad) 2008-May-01 01:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.300 (still bad) 2008-May-01 01:11:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.308 > 1.4)! 2008-May-01 01:11:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 7.308 0.923 0.927 2008-May-01 01:11:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.002 1.052 0.905 2008-May-01 01:11:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.078 1.054 0.946 2008-May-01 01:11:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.089 0.954 0.972 2008-May-01 01:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.293 (still bad) 2008-May-01 01:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.308 (still bad) 2008-May-01 01:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.297 (still bad) 2008-May-01 01:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.299 (still bad) 2008-May-01 01:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.301 (still bad) 2008-May-01 01:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.290 (still bad) 2008-May-01 01:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.288 (still bad) 2008-May-01 01:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.291 (still bad) 2008-May-01 01:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.288 (still bad) 2008-May-01 01:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.275 (still bad) 2008-May-01 01:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.289 (still bad) 2008-May-01 01:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.287 (still bad) 2008-May-01 01:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.280 (still bad) 2008-May-01 01:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.276 (still bad) 2008-May-01 01:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.281 (still bad) 2008-May-01 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.276 (still bad) 2008-May-01 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.280 (still bad) 2008-May-01 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.275 (still bad) 2008-May-01 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.290 (still bad) 2008-May-01 01:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.280 (still bad) 2008-May-01 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.274 (still bad) 2008-May-01 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.285 (still bad) 2008-May-01 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.282 (still bad) 2008-May-01 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.275 (still bad) 2008-May-01 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.279 (still bad) 2008-May-01 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.275 (still bad) 2008-May-01 01:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.276 (still bad) 2008-May-01 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.265 (still bad) 2008-May-01 01:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.273 (still bad) 2008-May-01 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.259 (still bad) 2008-May-01 01:12:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.269 > 1.4)! 2008-May-01 01:12:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 7.269 0.924 0.926 2008-May-01 01:12:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.001 1.052 0.906 2008-May-01 01:12:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.078 1.055 0.945 2008-May-01 01:12:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.090 0.955 0.972 2008-May-01 01:12:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.236 2008-May-01 01:12:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.380 > 1.4)! 2008-May-01 01:12:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 7.380 0.941 0.932 2008-May-01 01:12:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.001 1.053 0.906 2008-May-01 01:12:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.075 1.057 0.945 2008-May-01 01:12:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.090 0.954 0.971 2008-May-01 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.390 (still bad) 2008-May-01 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.380 (still bad) 2008-May-01 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.357 (still bad) 2008-May-01 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.389 (still bad) 2008-May-01 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.365 (still bad) 2008-May-01 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.364 (still bad) 2008-May-01 01:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 7.376 (still bad) 2008-May-01 01:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.352 (still bad) 2008-May-01 01:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.367 (still bad) 2008-May-01 01:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.368 (still bad) 2008-May-01 01:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.370 (still bad) 2008-May-01 01:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.358 (still bad) 2008-May-01 01:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.347 (still bad) 2008-May-01 01:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.356 (still bad) 2008-May-01 01:13:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.857 and 1.097 2008-May-01 01:13:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.225 > 1.4)! 2008-May-01 01:13:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 2.225 0.929 0.931 2008-May-01 01:13:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.001 1.050 0.904 2008-May-01 01:13:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.077 1.055 0.945 2008-May-01 01:13:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.090 0.954 0.972 2008-May-01 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.338 (still bad) 2008-May-01 01:13:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.137 2008-May-01 01:13:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.361 > 1.4)! 2008-May-01 01:13:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 7.361 0.951 0.936 2008-May-01 01:13:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.002 1.052 0.904 2008-May-01 01:13:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.076 1.056 0.945 2008-May-01 01:13:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.091 0.954 0.971 2008-May-01 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.309 (still bad) 2008-May-01 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.373 (still bad) 2008-May-01 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.364 (still bad) 2008-May-01 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.375 (still bad) 2008-May-01 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.384 (still bad) 2008-May-01 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 7.377 (still bad) 2008-May-01 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.398 (still bad) 2008-May-01 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.403 (still bad) 2008-May-01 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.394 (still bad) 2008-May-01 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.392 (still bad) 2008-May-01 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.375 (still bad) 2008-May-01 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 6.424 (still bad) 2008-May-01 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.441 (still bad) 2008-May-01 01:13:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.395 2008-May-01 01:13:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.581 > 1.4)! 2008-May-01 01:13:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 1.581 0.948 0.936 2008-May-01 01:13:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.003 1.051 0.904 2008-May-01 01:13:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.077 1.055 0.946 2008-May-01 01:13:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.090 0.957 0.972 2008-May-01 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.391 (still bad) 2008-May-01 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 7.396 (still bad) 2008-May-01 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.403 (still bad) 2008-May-01 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.403 (still bad) 2008-May-01 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 7.398 (still bad) 2008-May-01 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.450 (still bad) 2008-May-01 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.594 (still bad) 2008-May-01 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.586 (still bad) 2008-May-01 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.421 (still bad) 2008-May-01 01:14:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.343 2008-May-01 01:14:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:14:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:14:33 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-May-01 01:14:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:14:33 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-May-01 01:14:33 LOG1 fixed_driftmap: New position: year = 2008.334159536847 RA = 15:25:07.0 RA/Dec = 15:25:34.4 +00:34:31.5 2008-May-01 01:14:33 NOTE fixed_driftmap: Correcting ZA to 17:46:42.2 ... 2008-May-01 01:14:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7783926604 -CF 2008-May-01 01:14:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 01:14:33 START begin_task: Starting task 'WAPP calibration' 2008-May-01 01:14:33 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-May-01 01:14:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 01:14:33 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 01:14:33 START begin_task: Starting task 'selecting calibration type' 2008-May-01 01:14:33 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-May-01 01:14:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 01:14:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 01:14:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:14:33 START begin_task: Starting task 'waiting on setcal' 2008-May-01 01:14:33 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-May-01 01:14:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7783926604 -CF 2008-May-01 01:14:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:14:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 01:14:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:14:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:14:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 01:14:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 01:14:33 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 01:14:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:14:34 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 01:14:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:14:34 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:14:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:14:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:14:34 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:14:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 01:14:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:14:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 01:14:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:14:34 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:14:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:14:34 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:14:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 01:14:34 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 01:14:34 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-May-01 01:14:34 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 01:14:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:14:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 01:14:34 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 01:14:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 01:14:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 01:14:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:14:34 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:14:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 01:14:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:14:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:14:34 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 01:14:34 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 01:14:34 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:14:34 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-May-01 01:14:34 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 01:14:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:14:34 INFO2 take_spectra: Starting WAPP scan: 812200015 2008-May-01 01:14:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 01:14:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:14:34 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-May-01 01:14:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:14:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18875.00 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:14:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:14:36 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-May-01 01:14:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:14:36 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-May-01 01:14:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 01:14:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 01:14:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 01:14:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:14:36 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-May-01 01:14:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:14:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 01:14:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:14:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:14:36 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-May-01 01:14:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 01:14:36 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 01:14:36 LOG5 finish_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-May-01 01:14:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 01:14:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:14:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 01:14:36 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-May-01 01:14:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-May-01 01:14:37 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-May-01 01:14:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 01:14:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 01:14:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 01:14:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 01:14:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 01:14:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 01:14:37 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 01:14:37 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:14:37 LOG5 begin_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-May-01 01:14:37 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 01:14:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:14:37 INFO2 take_spectra: Starting WAPP scan: 812200016 2008-May-01 01:14:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 01:14:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:14:37 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-May-01 01:14:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 01:14:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:14:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.507 > 1.4)! 2008-May-01 01:14:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.276 1.433 1.251 1.246 2008-May-01 01:14:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.459 1.355 1.410 1.203 2008-May-01 01:14:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.382 1.453 1.427 1.242 2008-May-01 01:14:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.507 1.491 1.310 1.329 2008-May-01 01:14:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18878.00 2008-May-01 01:14:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0007.fits 2008-May-01 01:14:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0007.fits} 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.507 (still bad) 2008-May-01 01:14:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.904 and 1.170 2008-May-01 01:20:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.336 > 1.4)! 2008-May-01 01:20:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 2.336 0.949 0.943 2008-May-01 01:20:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.008 1.048 0.910 2008-May-01 01:20:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.087 1.057 0.949 2008-May-01 01:20:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.094 0.954 0.976 2008-May-01 01:20:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.097 2008-May-01 01:21:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (5.691 > 1.4)! 2008-May-01 01:21:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 5.691 0.952 0.944 2008-May-01 01:21:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.006 1.048 0.907 2008-May-01 01:21:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.083 1.059 0.947 2008-May-01 01:21:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 1.093 0.954 0.976 2008-May-01 01:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.451 (still bad) 2008-May-01 01:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.445 (still bad) 2008-May-01 01:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.476 (still bad) 2008-May-01 01:21:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.271 2008-May-01 01:21:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.363 > 1.4)! 2008-May-01 01:21:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 7.363 0.952 0.947 2008-May-01 01:21:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.005 1.048 0.907 2008-May-01 01:21:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.081 1.056 0.948 2008-May-01 01:21:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.092 0.955 0.975 2008-May-01 01:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 7.424 (still bad) 2008-May-01 01:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 4.708 (still bad) 2008-May-01 01:22:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.095 2008-May-01 01:22:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.724 < 0.8)! 2008-May-01 01:22:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 0.724 0.948 0.945 2008-May-01 01:22:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.001 1.046 0.907 2008-May-01 01:22:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.081 1.055 0.949 2008-May-01 01:22:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 1.094 0.953 0.974 2008-May-01 01:22:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.096 2008-May-01 01:24:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:24:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:24:38 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-May-01 01:24:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:24:38 LOG5 end_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2008-May-01 01:24:38 LOG1 fixed_driftmap: New position: year = 2008.3341787081401 RA = 15:35:13.7 RA/Dec = 15:35:41.0 +00:34:37.3 2008-May-01 01:24:38 NOTE fixed_driftmap: Correcting ZA to 17:46:36.4 ... 2008-May-01 01:24:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7767916523 -CF 2008-May-01 01:24:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 01:24:38 START begin_task: Starting task 'WAPP calibration' 2008-May-01 01:24:38 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-May-01 01:24:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 01:24:38 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 01:24:38 START begin_task: Starting task 'selecting calibration type' 2008-May-01 01:24:38 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-May-01 01:24:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 01:24:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 01:24:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:24:38 START begin_task: Starting task 'waiting on setcal' 2008-May-01 01:24:38 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-May-01 01:24:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7767916523 -CF 2008-May-01 01:24:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:24:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 01:24:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:24:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:24:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 01:24:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 01:24:39 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 01:24:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:24:39 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 01:24:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:24:39 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:24:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:24:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:24:39 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:24:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 01:24:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:24:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 01:24:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:24:39 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:24:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:24:39 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:24:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 01:24:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 01:24:39 LOG5 finish_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-May-01 01:24:39 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 01:24:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:24:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 01:24:39 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 01:24:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 01:24:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 01:24:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:24:39 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:24:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 01:24:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:24:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:24:39 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 01:24:39 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 01:24:39 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:24:39 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-May-01 01:24:39 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 01:24:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:24:39 INFO2 take_spectra: Starting WAPP scan: 812200017 2008-May-01 01:24:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 01:24:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:24:39 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-May-01 01:24:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:24:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19480.00 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:24:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:24:41 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-May-01 01:24:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:24:41 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-May-01 01:24:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 01:24:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 01:24:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 01:24:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:24:41 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-May-01 01:24:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:24:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 01:24:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:24:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:24:41 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-May-01 01:24:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 01:24:41 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 01:24:41 LOG5 finish_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-May-01 01:24:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 01:24:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:24:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 01:24:41 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-May-01 01:24:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-May-01 01:24:42 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-May-01 01:24:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 01:24:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 01:24:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 01:24:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 01:24:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 01:24:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 01:24:42 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 01:24:42 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:24:42 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-May-01 01:24:42 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 01:24:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:24:42 INFO2 take_spectra: Starting WAPP scan: 812200018 2008-May-01 01:24:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 01:24:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:24:42 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-May-01 01:24:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 01:24:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:24:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.502 > 1.4)! 2008-May-01 01:24:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.267 1.445 1.234 1.252 2008-May-01 01:24:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.456 1.360 1.413 1.212 2008-May-01 01:24:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.383 1.462 1.429 1.250 2008-May-01 01:24:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.502 1.494 1.307 1.334 2008-May-01 01:24:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0008.fits 2008-May-01 01:24:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19483.00 2008-May-01 01:24:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0008.fits} 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:24:44 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.502 (still bad) 2008-May-01 01:24:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.134 2008-May-01 01:28:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.672 < 0.8)! 2008-May-01 01:28:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.672 0.944 0.947 2008-May-01 01:28:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.005 1.046 0.909 2008-May-01 01:28:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.084 1.057 0.952 2008-May-01 01:28:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.095 0.950 0.975 2008-May-01 01:28:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.095 2008-May-01 01:34:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:34:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:34:43 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-May-01 01:34:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:34:43 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-May-01 01:34:43 LOG1 fixed_driftmap: New position: year = 2008.3341978794331 RA = 15:45:20.4 RA/Dec = 15:45:47.7 +00:34:43.2 2008-May-01 01:34:43 NOTE fixed_driftmap: Correcting ZA to 17:46:30.5 ... 2008-May-01 01:34:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7751329614 -CF 2008-May-01 01:34:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 01:34:43 START begin_task: Starting task 'WAPP calibration' 2008-May-01 01:34:43 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-May-01 01:34:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 01:34:43 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 01:34:43 START begin_task: Starting task 'selecting calibration type' 2008-May-01 01:34:43 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-May-01 01:34:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 01:34:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 01:34:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:34:43 START begin_task: Starting task 'waiting on setcal' 2008-May-01 01:34:43 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-May-01 01:34:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7751329614 -CF 2008-May-01 01:34:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:34:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 01:34:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:34:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:34:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 01:34:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 01:34:44 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 01:34:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:34:44 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 01:34:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:34:44 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:34:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:34:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:34:44 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:34:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 01:34:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:34:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 01:34:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:34:44 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:34:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:34:44 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:34:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 01:34:44 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 01:34:44 LOG5 finish_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-May-01 01:34:44 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 01:34:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:34:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 01:34:44 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 01:34:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 01:34:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 01:34:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:34:44 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:34:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 01:34:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:34:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:34:44 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 01:34:44 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 01:34:44 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:34:44 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-May-01 01:34:44 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 01:34:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:34:44 INFO2 take_spectra: Starting WAPP scan: 812200019 2008-May-01 01:34:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 01:34:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:34:44 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-May-01 01:34:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:34:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20085.00 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:34:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:34:46 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-May-01 01:34:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:34:46 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-May-01 01:34:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 01:34:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 01:34:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 01:34:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:34:46 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-May-01 01:34:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:34:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 01:34:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:34:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:34:46 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-May-01 01:34:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 01:34:46 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 01:34:46 LOG5 finish_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-May-01 01:34:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 01:34:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:34:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 01:34:46 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-May-01 01:34:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-May-01 01:34:47 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-May-01 01:34:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 01:34:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 01:34:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 01:34:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 01:34:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 01:34:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 01:34:47 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 01:34:47 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:34:47 LOG5 begin_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2008-May-01 01:34:47 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 01:34:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:34:47 INFO2 take_spectra: Starting WAPP scan: 812200020 2008-May-01 01:34:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 01:34:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:34:47 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-May-01 01:34:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 01:34:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:34:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0009.fits 2008-May-01 01:34:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20088.00 2008-May-01 01:34:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0009.fits} 2008-May-01 01:34:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.501 > 1.4)! 2008-May-01 01:34:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.265 1.474 1.225 1.247 2008-May-01 01:34:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.463 1.364 1.410 1.214 2008-May-01 01:34:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.395 1.479 1.435 1.257 2008-May-01 01:34:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.501 1.501 1.307 1.338 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.952 and 1.479 (still bad) 2008-May-01 01:34:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.163 2008-May-01 01:35:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.074 > 1.4)! 2008-May-01 01:35:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 7.074 0.944 0.944 2008-May-01 01:35:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.010 1.052 0.914 2008-May-01 01:35:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.104 1.061 0.954 2008-May-01 01:35:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.098 0.950 0.979 2008-May-01 01:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 5.578 (still bad) 2008-May-01 01:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 7.418 (still bad) 2008-May-01 01:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 5.477 (still bad) 2008-May-01 01:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.789 and 1.149 (still bad) 2008-May-01 01:35:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.145 2008-May-01 01:35:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.730 > 1.4)! 2008-May-01 01:35:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 4.730 0.952 0.949 2008-May-01 01:35:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.008 1.054 0.915 2008-May-01 01:35:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.104 1.062 0.953 2008-May-01 01:35:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.096 0.951 0.977 2008-May-01 01:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 4.985 (still bad) 2008-May-01 01:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.922 and 2.881 (still bad) 2008-May-01 01:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.929 and 7.476 (still bad) 2008-May-01 01:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.933 and 6.048 (still bad) 2008-May-01 01:35:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.815 and 1.121 2008-May-01 01:35:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.491 < 0.8)! 2008-May-01 01:35:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 0.491 0.958 0.952 2008-May-01 01:35:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.008 1.079 0.938 2008-May-01 01:35:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 1.127 1.060 0.951 2008-May-01 01:35:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.095 0.952 0.976 2008-May-01 01:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.131 (still bad) 2008-May-01 01:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.937 and 7.139 (still bad) 2008-May-01 01:35:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.826 and 1.113 2008-May-01 01:35:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.432 < 0.8)! 2008-May-01 01:35:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 0.432 0.957 0.951 2008-May-01 01:35:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.009 1.079 0.935 2008-May-01 01:35:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 1.092 1.064 0.951 2008-May-01 01:35:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.095 0.951 0.977 2008-May-01 01:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.936 and 7.454 (still bad) 2008-May-01 01:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.937 and 1.488 (still bad) 2008-May-01 01:35:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.886 and 1.095 2008-May-01 01:36:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.921 > 1.4)! 2008-May-01 01:36:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 1.921 0.957 0.951 2008-May-01 01:36:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.009 1.081 0.935 2008-May-01 01:36:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 1.089 1.066 0.952 2008-May-01 01:36:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.096 0.952 0.976 2008-May-01 01:36:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.933 and 1.218 2008-May-01 01:36:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.753 < 0.8)! 2008-May-01 01:36:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.753 0.944 0.951 2008-May-01 01:36:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.007 1.048 0.909 2008-May-01 01:36:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.082 1.064 0.954 2008-May-01 01:36:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 1.095 0.950 0.975 2008-May-01 01:36:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.140 2008-May-01 01:40:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-May-01 01:40:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 0.726 0.954 0.951 2008-May-01 01:40:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.007 1.053 0.912 2008-May-01 01:40:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 1.086 1.063 0.953 2008-May-01 01:40:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.098 0.956 0.978 2008-May-01 01:40:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.097 2008-May-01 01:44:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:44:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:44:48 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-May-01 01:44:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:44:48 LOG5 end_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2008-May-01 01:44:48 LOG1 fixed_driftmap: New position: year = 2008.3342170507262 RA = 15:55:27.0 RA/Dec = 15:55:54.3 +00:34:49.4 2008-May-01 01:44:48 NOTE fixed_driftmap: Correcting ZA to 17:46:24.3 ... 2008-May-01 01:44:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7734198255 -CF 2008-May-01 01:44:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 01:44:48 START begin_task: Starting task 'WAPP calibration' 2008-May-01 01:44:48 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-May-01 01:44:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 01:44:48 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 01:44:48 START begin_task: Starting task 'selecting calibration type' 2008-May-01 01:44:48 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-May-01 01:44:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 01:44:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 01:44:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:44:48 START begin_task: Starting task 'waiting on setcal' 2008-May-01 01:44:48 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-May-01 01:44:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7734198255 -CF 2008-May-01 01:44:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:44:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 01:44:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:44:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:44:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 01:44:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 01:44:49 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 01:44:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:44:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 01:44:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:44:49 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:44:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:44:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:44:49 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:44:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 01:44:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:44:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 01:44:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:44:49 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:44:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:44:49 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:44:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 01:44:49 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 01:44:49 LOG5 finish_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-May-01 01:44:49 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 01:44:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:44:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 01:44:49 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 01:44:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 01:44:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 01:44:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:44:49 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:44:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 01:44:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:44:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:44:49 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2008-May-01 01:44:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 01:44:49 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 01:44:49 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:44:49 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-May-01 01:44:49 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 01:44:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:44:49 INFO2 take_spectra: Starting WAPP scan: 812200021 2008-May-01 01:44:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 01:44:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:44:50 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-May-01 01:44:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:44:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20691.00 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.511 > 1.4)! 2008-May-01 01:44:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 1.151 0.943 0.952 2008-May-01 01:44:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.015 1.052 0.915 2008-May-01 01:44:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.394 1.470 1.440 1.259 2008-May-01 01:44:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.511 1.506 1.313 1.344 2008-May-01 01:44:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:44:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:44:52 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-May-01 01:44:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:44:52 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-May-01 01:44:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 01:44:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 01:44:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 01:44:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:44:52 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-May-01 01:44:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:44:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 01:44:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:44:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:44:52 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-May-01 01:44:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 01:44:52 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 01:44:52 LOG5 finish_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-May-01 01:44:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 01:44:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:44:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 01:44:52 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-May-01 01:44:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-May-01 01:44:52 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-May-01 01:44:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 01:44:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 01:44:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 01:44:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 01:44:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 01:44:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 01:44:53 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 01:44:53 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:44:53 LOG5 begin_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-May-01 01:44:53 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 01:44:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:44:53 INFO2 take_spectra: Starting WAPP scan: 812200022 2008-May-01 01:44:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 01:44:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:44:53 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-May-01 01:44:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 01:44:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:44:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0010.fits 2008-May-01 01:44:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20694.00 2008-May-01 01:44:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0010.fits} 2008-May-01 01:44:54 INFO5 check_wapp_levels: WAPP power levels are between 1.216 and 1.511 (still bad) 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:44:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.156 2008-May-01 01:49:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.616 > 1.4)! 2008-May-01 01:49:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.616 0.961 0.958 2008-May-01 01:49:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 1.023 1.052 0.917 2008-May-01 01:49:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.045 1.098 1.067 0.960 2008-May-01 01:49:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.104 0.957 0.984 2008-May-01 01:49:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.918 and 1.105 2008-May-01 01:49:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.433 > 1.4)! 2008-May-01 01:49:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 7.433 0.960 0.958 2008-May-01 01:49:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 1.031 1.051 0.917 2008-May-01 01:49:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.095 1.069 0.964 2008-May-01 01:49:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.102 0.957 0.983 2008-May-01 01:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 7.500 (still bad) 2008-May-01 01:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 4.865 (still bad) 2008-May-01 01:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 7.507 (still bad) 2008-May-01 01:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 7.505 (still bad) 2008-May-01 01:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 7.495 (still bad) 2008-May-01 01:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 7.506 (still bad) 2008-May-01 01:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 2.968 (still bad) 2008-May-01 01:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 7.508 (still bad) 2008-May-01 01:50:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.370 2008-May-01 01:50:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.572 > 1.4)! 2008-May-01 01:50:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.572 0.953 0.953 2008-May-01 01:50:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.015 1.049 0.917 2008-May-01 01:50:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.053 1.113 1.059 0.959 2008-May-01 01:50:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 1.102 0.956 0.982 2008-May-01 01:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.917 and 2.338 (still bad) 2008-May-01 01:50:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.120 2008-May-01 01:54:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:54:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:54:54 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-May-01 01:54:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:54:54 LOG5 end_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-May-01 01:54:54 LOG1 fixed_driftmap: New position: year = 2008.3342362537076 RA = 16:05:34.7 RA/Dec = 16:06:02.0 +00:34:55.8 2008-May-01 01:54:54 NOTE fixed_driftmap: Correcting ZA to 17:46:17.9 ... 2008-May-01 01:54:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7716526067 -CF 2008-May-01 01:54:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 01:54:54 START begin_task: Starting task 'WAPP calibration' 2008-May-01 01:54:54 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-May-01 01:54:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 01:54:54 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 01:54:54 START begin_task: Starting task 'selecting calibration type' 2008-May-01 01:54:54 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-May-01 01:54:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 01:54:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 01:54:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:54:54 START begin_task: Starting task 'waiting on setcal' 2008-May-01 01:54:54 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-May-01 01:54:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7716526067 -CF 2008-May-01 01:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:54:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 01:54:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 01:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:54:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 01:54:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 01:54:54 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 01:54:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:54:55 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 01:54:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:54:55 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 01:54:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:54:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:54:55 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:54:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 01:54:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 01:54:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 01:54:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 01:54:55 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 01:54:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 01:54:55 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 01:54:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 01:54:55 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 01:54:55 LOG5 finish_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-May-01 01:54:55 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 01:54:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:54:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 01:54:55 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 01:54:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 01:54:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 01:54:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:54:55 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:54:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 01:54:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:54:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:54:55 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 01:54:55 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 01:54:55 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:54:55 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-May-01 01:54:55 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 01:54:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:54:55 INFO2 take_spectra: Starting WAPP scan: 812200023 2008-May-01 01:54:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 01:54:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:54:55 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-May-01 01:54:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:54:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21296.00 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:54:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 01:54:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.506 > 1.4)! 2008-May-01 01:54:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.128 0.939 0.949 2008-May-01 01:54:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.460 1.365 1.411 1.216 2008-May-01 01:54:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.413 1.496 1.450 1.255 2008-May-01 01:54:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.506 1.503 1.311 1.339 2008-May-01 01:54:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 01:54:57 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-May-01 01:54:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 01:54:57 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-May-01 01:54:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 01:54:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 01:54:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 01:54:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 01:54:57 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-May-01 01:54:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 01:54:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 01:54:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 01:54:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 01:54:57 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-May-01 01:54:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 01:54:57 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 01:54:57 LOG5 finish_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-May-01 01:54:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 01:54:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 01:54:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 01:54:57 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-May-01 01:54:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-May-01 01:54:58 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-May-01 01:54:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 01:54:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 01:54:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 01:54:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 01:54:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 01:54:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 01:54:58 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 01:54:58 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 01:54:58 LOG5 begin_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2008-May-01 01:54:58 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 01:54:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 01:54:58 INFO2 take_spectra: Starting WAPP scan: 812200024 2008-May-01 01:54:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 01:54:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 01:54:58 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-May-01 01:54:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 01:54:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 01:54:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21299.00 2008-May-01 01:54:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0011.fits 2008-May-01 01:54:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0011.fits} 2008-May-01 01:54:59 INFO5 check_wapp_levels: WAPP power levels are between 1.216 and 1.506 (still bad) 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:55:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 01:55:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.130 2008-May-01 02:04:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:04:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:04:59 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-May-01 02:04:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:04:59 LOG5 end_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2008-May-01 02:04:59 LOG1 fixed_driftmap: New position: year = 2008.3342554250007 RA = 16:15:41.4 RA/Dec = 16:16:08.7 +00:35:02.3 2008-May-01 02:04:59 NOTE fixed_driftmap: Correcting ZA to 17:46:11.4 ... 2008-May-01 02:04:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7698405953 -CF 2008-May-01 02:04:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 02:04:59 START begin_task: Starting task 'WAPP calibration' 2008-May-01 02:04:59 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-May-01 02:04:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 02:04:59 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 02:04:59 START begin_task: Starting task 'selecting calibration type' 2008-May-01 02:04:59 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-May-01 02:04:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 02:04:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 02:04:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:04:59 START begin_task: Starting task 'waiting on setcal' 2008-May-01 02:04:59 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-May-01 02:04:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7698405953 -CF 2008-May-01 02:04:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:04:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 02:04:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:04:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:05:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 02:05:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 02:05:00 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 02:05:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:05:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 02:05:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:05:00 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:05:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:05:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:05:00 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:05:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 02:05:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:05:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 02:05:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:05:00 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:05:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:05:00 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:05:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 02:05:00 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 02:05:00 LOG5 finish_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-May-01 02:05:00 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 02:05:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:05:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 02:05:00 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 02:05:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 02:05:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 02:05:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:05:00 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:05:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 02:05:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:05:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:05:00 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2008-May-01 02:05:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 02:05:00 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 02:05:00 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:05:00 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-May-01 02:05:00 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 02:05:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:05:00 INFO2 take_spectra: Starting WAPP scan: 812200025 2008-May-01 02:05:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 02:05:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:05:01 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-May-01 02:05:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:05:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21902.00 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.503 > 1.4)! 2008-May-01 02:05:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.271 1.355 1.232 1.254 2008-May-01 02:05:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.453 1.367 1.410 1.216 2008-May-01 02:05:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.384 1.475 1.426 1.258 2008-May-01 02:05:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.503 1.502 1.307 1.336 2008-May-01 02:05:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:05:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:05:03 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-May-01 02:05:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:05:03 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-May-01 02:05:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 02:05:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 02:05:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 02:05:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:05:03 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-May-01 02:05:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:05:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:05:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:05:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:05:03 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-May-01 02:05:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 02:05:03 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 02:05:03 LOG5 finish_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-May-01 02:05:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 02:05:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:05:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 02:05:03 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-May-01 02:05:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-May-01 02:05:03 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-May-01 02:05:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 02:05:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 02:05:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 02:05:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 02:05:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 02:05:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 02:05:04 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 02:05:04 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:05:04 LOG5 begin_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2008-May-01 02:05:04 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 02:05:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:05:04 INFO2 take_spectra: Starting WAPP scan: 812200026 2008-May-01 02:05:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 02:05:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:05:04 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-May-01 02:05:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 02:05:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:05:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0012.fits 2008-May-01 02:05:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21905.00 2008-May-01 02:05:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0012.fits} 2008-May-01 02:05:05 INFO5 check_wapp_levels: WAPP power levels are between 1.216 and 1.503 (still bad) 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:05:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.101 2008-May-01 02:13:31 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:13:31.302 (seconds: 8011.302)!} 2008-May-01 02:13:31 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:13:31.302 (seconds: 8011.302)! 2008-May-01 02:13:32 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 8010.0 to 8011.0! 2008-May-01 02:13:33 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (8010.0 - 8012.0)! 2008-May-01 02:15:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:15:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:15:05 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-May-01 02:15:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:15:05 LOG5 end_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2008-May-01 02:15:05 LOG1 fixed_driftmap: New position: year = 2008.3342746279818 RA = 16:25:49.1 RA/Dec = 16:26:16.3 +00:35:09.0 2008-May-01 02:15:05 NOTE fixed_driftmap: Correcting ZA to 17:46:04.7 ... 2008-May-01 02:15:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7679813194 -CF 2008-May-01 02:15:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 02:15:05 START begin_task: Starting task 'WAPP calibration' 2008-May-01 02:15:05 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-May-01 02:15:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 02:15:05 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 02:15:05 START begin_task: Starting task 'selecting calibration type' 2008-May-01 02:15:05 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-May-01 02:15:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 02:15:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 02:15:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:15:05 START begin_task: Starting task 'waiting on setcal' 2008-May-01 02:15:05 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-May-01 02:15:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7679813194 -CF 2008-May-01 02:15:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:15:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 02:15:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:15:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:15:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 02:15:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 02:15:05 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2008-May-01 02:15:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 02:15:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:15:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 02:15:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:15:06 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:15:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:15:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:15:06 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:15:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 02:15:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:15:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 02:15:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:15:06 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:15:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:15:06 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:15:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 02:15:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 02:15:06 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-May-01 02:15:06 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 02:15:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:15:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 02:15:06 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 02:15:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 02:15:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 02:15:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:15:06 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:15:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 02:15:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:15:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:15:06 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 02:15:06 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 02:15:06 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:15:06 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-May-01 02:15:06 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 02:15:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:15:06 INFO2 take_spectra: Starting WAPP scan: 812200027 2008-May-01 02:15:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 02:15:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:15:06 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-May-01 02:15:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:15:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22507.00 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:15:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:15:08 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-May-01 02:15:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:15:08 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-May-01 02:15:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 02:15:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 02:15:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 02:15:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:15:08 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-May-01 02:15:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:15:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:15:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:15:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:15:08 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-May-01 02:15:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 02:15:08 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 02:15:08 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-May-01 02:15:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 02:15:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:15:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 02:15:08 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-May-01 02:15:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-May-01 02:15:08 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-May-01 02:15:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 02:15:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 02:15:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 02:15:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 02:15:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 02:15:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 02:15:09 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 02:15:09 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:15:09 LOG5 begin_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-May-01 02:15:09 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 02:15:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:15:09 INFO2 take_spectra: Starting WAPP scan: 812200028 2008-May-01 02:15:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 02:15:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:15:09 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-May-01 02:15:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 02:15:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:15:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.504 > 1.4)! 2008-May-01 02:15:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.269 1.266 1.218 1.239 2008-May-01 02:15:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.458 1.370 1.407 1.215 2008-May-01 02:15:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.385 1.469 1.429 1.255 2008-May-01 02:15:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.504 1.501 1.310 1.337 2008-May-01 02:15:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0013.fits 2008-May-01 02:15:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22510.00 2008-May-01 02:15:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0013.fits} 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:15:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.100 2008-May-01 02:17:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.8)! 2008-May-01 02:17:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.726 0.948 0.946 2008-May-01 02:17:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.011 1.051 0.914 2008-May-01 02:17:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.087 1.059 0.951 2008-May-01 02:17:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.100 0.954 0.980 2008-May-01 02:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 7.436 (still bad) 2008-May-01 02:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 2.866 (still bad) 2008-May-01 02:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 7.438 (still bad) 2008-May-01 02:17:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.103 2008-May-01 02:17:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.234 > 1.4)! 2008-May-01 02:17:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 4.234 0.959 0.951 2008-May-01 02:17:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.010 1.050 0.913 2008-May-01 02:17:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.030 1.086 1.060 0.952 2008-May-01 02:17:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.103 0.956 0.981 2008-May-01 02:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 2.538 (still bad) 2008-May-01 02:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 4.699 (still bad) 2008-May-01 02:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 2.245 (still bad) 2008-May-01 02:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 6.240 (still bad) 2008-May-01 02:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 4.163 (still bad) 2008-May-01 02:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 7.308 (still bad) 2008-May-01 02:17:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.098 2008-May-01 02:17:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.825 > 1.4)! 2008-May-01 02:17:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 2.825 0.965 0.958 2008-May-01 02:17:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.010 1.049 0.912 2008-May-01 02:17:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 1.092 1.064 0.953 2008-May-01 02:17:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.100 0.953 0.980 2008-May-01 02:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.100 (still bad) 2008-May-01 02:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 2.067 (still bad) 2008-May-01 02:17:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.100 2008-May-01 02:17:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.774 < 0.8)! 2008-May-01 02:17:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 0.774 0.963 0.959 2008-May-01 02:17:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.012 1.049 0.912 2008-May-01 02:17:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 1.091 1.063 0.953 2008-May-01 02:17:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 1.100 0.954 0.980 2008-May-01 02:17:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.868 and 1.101 2008-May-01 02:17:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.069 > 1.4)! 2008-May-01 02:17:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 2.069 0.961 0.960 2008-May-01 02:17:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.013 1.049 0.912 2008-May-01 02:17:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 1.089 1.063 0.953 2008-May-01 02:17:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.099 0.955 0.979 2008-May-01 02:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.776 and 1.100 (still bad) 2008-May-01 02:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.100 (still bad) 2008-May-01 02:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.101 (still bad) 2008-May-01 02:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 2.220 (still bad) 2008-May-01 02:18:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.102 2008-May-01 02:18:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.630 < 0.8)! 2008-May-01 02:18:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.630 0.964 0.959 2008-May-01 02:18:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.011 1.049 0.912 2008-May-01 02:18:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.092 1.068 0.953 2008-May-01 02:18:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 1.101 0.956 0.980 2008-May-01 02:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.798 and 1.101 (still bad) 2008-May-01 02:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 4.636 (still bad) 2008-May-01 02:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 3.282 (still bad) 2008-May-01 02:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.770 (still bad) 2008-May-01 02:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.796 (still bad) 2008-May-01 02:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 5.119 (still bad) 2008-May-01 02:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.102 (still bad) 2008-May-01 02:18:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.861 and 1.102 2008-May-01 02:18:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.8)! 2008-May-01 02:18:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.742 0.964 0.961 2008-May-01 02:18:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.014 1.049 0.912 2008-May-01 02:18:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.092 1.068 0.957 2008-May-01 02:18:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 1.103 0.958 0.983 2008-May-01 02:18:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.102 2008-May-01 02:25:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:25:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:25:10 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-May-01 02:25:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:25:10 LOG5 end_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-May-01 02:25:10 LOG1 fixed_driftmap: New position: year = 2008.334293799275 RA = 16:35:55.8 RA/Dec = 16:36:23.0 +00:35:15.8 2008-May-01 02:25:10 NOTE fixed_driftmap: Correcting ZA to 17:45:57.9 ... 2008-May-01 02:25:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7660845418 -CF 2008-May-01 02:25:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 02:25:10 START begin_task: Starting task 'WAPP calibration' 2008-May-01 02:25:10 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-May-01 02:25:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 02:25:10 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 02:25:10 START begin_task: Starting task 'selecting calibration type' 2008-May-01 02:25:10 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-May-01 02:25:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 02:25:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 02:25:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:25:10 START begin_task: Starting task 'waiting on setcal' 2008-May-01 02:25:10 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-May-01 02:25:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7660845418 -CF 2008-May-01 02:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:25:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 02:25:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:25:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 02:25:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 02:25:11 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 02:25:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:25:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 02:25:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:25:11 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:25:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:25:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:25:11 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:25:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 02:25:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:25:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 02:25:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:25:11 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:25:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:25:11 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:25:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 02:25:11 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 02:25:11 LOG5 finish_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-May-01 02:25:11 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 02:25:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:25:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 02:25:11 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 02:25:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 02:25:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 02:25:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:25:11 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:25:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 02:25:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:25:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:25:11 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-May-01 02:25:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 02:25:11 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 02:25:11 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:25:11 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-May-01 02:25:11 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 02:25:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:25:11 INFO2 take_spectra: Starting WAPP scan: 812200029 2008-May-01 02:25:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 02:25:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:25:12 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-May-01 02:25:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:25:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23113.00 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:25:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:25:14 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-May-01 02:25:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:25:14 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-May-01 02:25:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 02:25:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 02:25:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 02:25:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:25:14 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-May-01 02:25:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:25:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:25:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:25:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:25:14 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-May-01 02:25:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 02:25:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 02:25:14 LOG5 finish_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-May-01 02:25:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 02:25:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:25:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 02:25:14 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-May-01 02:25:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-May-01 02:25:14 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-May-01 02:25:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 02:25:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 02:25:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 02:25:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 02:25:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 02:25:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 02:25:15 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 02:25:15 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:25:15 LOG5 begin_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-May-01 02:25:15 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 02:25:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:25:15 INFO2 take_spectra: Starting WAPP scan: 812200030 2008-May-01 02:25:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 02:25:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:25:15 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-May-01 02:25:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 02:25:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:25:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.516 > 1.4)! 2008-May-01 02:25:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.271 1.347 1.235 1.266 2008-May-01 02:25:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.460 1.374 1.414 1.221 2008-May-01 02:25:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.391 1.478 1.438 1.265 2008-May-01 02:25:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.506 1.516 1.314 1.350 2008-May-01 02:25:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23116.00 2008-May-01 02:25:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0014.fits 2008-May-01 02:25:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0014.fits} 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:25:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.921 and 1.114 2008-May-01 02:30:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.828 > 1.4)! 2008-May-01 02:30:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 2.828 0.954 0.963 2008-May-01 02:30:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 1.029 1.060 0.928 2008-May-01 02:30:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.110 1.068 0.977 2008-May-01 02:30:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 1.119 0.966 0.997 2008-May-01 02:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.928 and 2.415 (still bad) 2008-May-01 02:30:30 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.928 and 1.120 2008-May-01 02:30:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.788 < 0.8)! 2008-May-01 02:30:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.788 0.973 0.967 2008-May-01 02:30:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 1.029 1.060 0.929 2008-May-01 02:30:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.109 1.072 0.976 2008-May-01 02:30:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.122 0.968 1.000 2008-May-01 02:30:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.928 and 1.395 2008-May-01 02:30:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (3.444 > 1.4)! 2008-May-01 02:30:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 3.444 0.972 0.967 2008-May-01 02:30:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 1.030 1.058 0.929 2008-May-01 02:30:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.110 1.072 0.977 2008-May-01 02:30:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 1.122 0.968 0.999 2008-May-01 02:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.928 and 1.963 (still bad) 2008-May-01 02:30:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.929 and 1.285 2008-May-01 02:30:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.782 < 0.8)! 2008-May-01 02:30:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 0.782 0.972 0.969 2008-May-01 02:30:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 1.029 1.059 0.930 2008-May-01 02:30:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.110 1.074 0.975 2008-May-01 02:30:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 1.121 0.966 0.998 2008-May-01 02:30:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.930 and 1.120 2008-May-01 02:30:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (7.564 > 1.4)! 2008-May-01 02:30:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 7.564 0.968 0.969 2008-May-01 02:30:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 1.026 1.058 0.930 2008-May-01 02:30:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.108 1.071 0.974 2008-May-01 02:30:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 1.118 0.965 0.996 2008-May-01 02:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.929 and 7.555 (still bad) 2008-May-01 02:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.930 and 3.197 (still bad) 2008-May-01 02:30:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.930 and 1.188 2008-May-01 02:35:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:35:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:35:16 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-May-01 02:35:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:35:16 LOG5 end_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-May-01 02:35:16 LOG1 fixed_driftmap: New position: year = 2008.3343130022563 RA = 16:46:03.4 RA/Dec = 16:46:30.6 +00:35:22.8 2008-May-01 02:35:16 NOTE fixed_driftmap: Correcting ZA to 17:45:50.9 ... 2008-May-01 02:35:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.7641476976 -CF 2008-May-01 02:35:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-May-01 02:35:16 START begin_task: Starting task 'WAPP calibration' 2008-May-01 02:35:16 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-May-01 02:35:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-May-01 02:35:16 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-May-01 02:35:16 START begin_task: Starting task 'selecting calibration type' 2008-May-01 02:35:16 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-May-01 02:35:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 02:35:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 02:35:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:35:16 START begin_task: Starting task 'waiting on setcal' 2008-May-01 02:35:16 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-May-01 02:35:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.7641476976 -CF 2008-May-01 02:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:35:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 02:35:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:35:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 02:35:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 02:35:17 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 02:35:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:35:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 02:35:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:35:17 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:35:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:35:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:35:17 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:35:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 02:35:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:35:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 02:35:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:35:17 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:35:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:35:17 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:35:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 02:35:17 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 02:35:17 LOG5 finish_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-May-01 02:35:17 INFO3 finish_task: DONE finished configuring: calibration type 2008-May-01 02:35:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:35:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 02:35:17 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-May-01 02:35:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 02:35:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 02:35:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:35:17 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:35:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 02:35:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:35:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:35:17 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-May-01 02:35:17 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-May-01 02:35:17 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:35:17 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-May-01 02:35:17 INFO3 take_spectra: Starting take_spectra 1 1 2008-May-01 02:35:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:35:17 INFO2 take_spectra: Starting WAPP scan: 812200031 2008-May-01 02:35:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-May-01 02:35:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:35:17 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-May-01 02:35:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:35:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23718.00 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:35:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-May-01 02:35:19 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-May-01 02:35:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-May-01 02:35:19 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-May-01 02:35:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-May-01 02:35:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 02:35:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 02:35:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:35:19 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-May-01 02:35:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:35:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:35:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:35:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:35:19 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-May-01 02:35:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 02:35:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-May-01 02:35:19 LOG5 finish_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-May-01 02:35:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-May-01 02:35:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:35:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-May-01 02:35:19 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-May-01 02:35:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-May-01 02:35:20 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-May-01 02:35:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 02:35:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 02:35:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 02:35:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 02:35:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-May-01 02:35:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-May-01 02:35:20 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-May-01 02:35:20 START begin_task: Starting task 'WAPP spectral observation' 2008-May-01 02:35:20 LOG5 begin_task: Level: (2) ID = <10262> Status = 0 0 0 0 ok 2008-May-01 02:35:20 INFO3 take_spectra: Starting take_spectra 600 1 2008-May-01 02:35:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-May-01 02:35:20 INFO2 take_spectra: Starting WAPP scan: 812200032 2008-May-01 02:35:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-May-01 02:35:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-May-01 02:35:20 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-May-01 02:35:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 02:35:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:35:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.530 > 1.4)! 2008-May-01 02:35:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.284 1.485 1.271 1.273 2008-May-01 02:35:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.475 1.382 1.429 1.230 2008-May-01 02:35:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.408 1.499 1.453 1.282 2008-May-01 02:35:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.530 1.520 1.329 1.355 2008-May-01 02:35:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0015.fits 2008-May-01 02:35:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23721.00 2008-May-01 02:35:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0015.fits} 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:35:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.929 and 1.122 2008-May-01 02:35:39 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-May-01 02:35:39 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-May-01 02:35:39 WARNING abort_task: WARNING abort requested! 2008-May-01 02:35:39 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-May-01 02:35:39 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-May-01 02:35:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-May-01 02:35:39 LOG5 end_task: Level: (3) ID = <10263> Status = 1 0 0 0 abort 2008-May-01 02:35:39 START begin_task: Starting task 'stopping the WAPPs' 2008-May-01 02:35:39 LOG5 begin_task: Level: (3) ID = <10264> Status = 1 0 0 0 abort 2008-May-01 02:35:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-May-01 02:35:39 INFO1 stop_wapp: Stopping the WAPPs 2008-May-01 02:35:39 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-May-01 02:35:39 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-May-01 02:35:39 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-May-01 02:35:39 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-May-01 02:35:39 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-May-01 02:35:39 LOG5 begin_task: Level: (4) ID = <10265> Status = 1 0 0 0 abort 2008-May-01 02:35:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-May-01 02:35:40 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-May-01 02:35:40 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-May-01 02:35:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:35:40 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-May-01 02:35:40 LOG5 end_task: Level: (4) ID = <10265> Status = 1 0 0 0 abort 2008-May-01 02:35:40 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-May-01 02:35:40 LOG5 end_task: Level: (3) ID = <10264> Status = 1 0 0 0 abort 2008-May-01 02:35:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-May-01 02:35:40 LOG5 end_task: Level: (2) ID = <10262> Status = 1 0 0 0 abort 2008-May-01 02:35:40 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-May-01 02:35:40 LOG5 finish_task: Level: (1) ID = <10048> Status = 1 0 0 0 abort 2008-May-01 02:35:40 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-May-01 02:35:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-May-01 02:35:40 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-May-01 02:35:40 LOG5 end_task: Level: (1) ID = <10048> Status = 1 0 0 0 abort 2008-May-01 02:35:52 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-May-01 02:35:58 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-May-01 02:35:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-May-01 02:35:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-May-01 02:35:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-May-01 02:35:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-May-01 02:35:58 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-May-01 02:35:58 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-May-01 02:35:58 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-May-01 02:35:58 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-May-01 02:35:58 LOG5 begin_task: Level: (1) ID = <10266> Status = 0 0 0 0 ok 2008-May-01 02:35:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-May-01 02:35:58 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-May-01 02:35:58 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-May-01 02:35:58 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-May-01 02:35:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-01 02:35:58 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-May-01 02:35:59 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-May-01 02:35:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-May-01 02:35:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-May-01 02:36:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-May-01 02:36:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-01 02:36:01 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-May-01 02:36:01 LOG5 begin_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2008-May-01 02:36:01 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-May-01 02:36:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-May-01 02:36:01 LOG1 config_iflo: Receiver ALFA already selected 2008-May-01 02:36:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:36:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 02:36:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:36:01 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-May-01 02:36:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:36:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:36:01 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-May-01 02:36:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:36:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 02:36:02 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-May-01 02:36:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-May-01 02:36:02 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-May-01 02:36:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-May-01 02:36:02 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-May-01 02:36:02 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-May-01 02:36:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-May-01 02:36:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:02 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-May-01 02:36:02 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-May-01 02:36:02 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-May-01 02:36:02 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-May-01 02:36:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-May-01 02:36:02 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-May-01 02:36:02 LOG5 finish_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2008-May-01 02:36:02 DONE finish_task: DONE finished configuration: IF/LO path 2008-May-01 02:36:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-01 02:36:02 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-May-01 02:36:02 LOG5 end_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2008-May-01 02:36:02 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-May-01 02:36:02 LOG5 begin_task: Level: (2) ID = <10270> Status = 0 0 0 0 ok 2008-May-01 02:36:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-May-01 02:36:02 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-May-01 02:36:02 START begin_task: Starting task 'selecting calibration port' 2008-May-01 02:36:02 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-May-01 02:36:02 LOG3 vw_send: To DATATAKING: calport 3 2008-May-01 02:36:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-May-01 02:36:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:02 START begin_task: Starting task 'waiting on calport' 2008-May-01 02:36:02 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: calport 3 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 02:36:03 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-May-01 02:36:03 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-May-01 02:36:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-May-01 02:36:03 STOP finish_task: Finishing task 'selecting calibration port' 2008-May-01 02:36:03 LOG5 finish_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-May-01 02:36:03 INFO2 finish_task: DONE finished configuring: calibration port 2008-May-01 02:36:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:36:03 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-May-01 02:36:03 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 02:36:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 02:36:03 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-May-01 02:36:03 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-May-01 02:36:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:36:03 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-May-01 02:36:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-May-01 02:36:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-May-01 02:36:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:36:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 02:36:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:36:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:36:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:36:03 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-May-01 02:36:03 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-May-01 02:36:03 STOP finish_task: Finishing task 'configuring WAPPs' 2008-May-01 02:36:03 LOG5 finish_task: Level: (2) ID = <10270> Status = 0 0 0 0 ok 2008-May-01 02:36:03 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-May-01 02:36:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-01 02:36:03 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-May-01 02:36:03 LOG5 end_task: Level: (2) ID = <10270> Status = 0 0 0 0 ok 2008-May-01 02:36:03 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-May-01 02:36:03 BEGIN begin_task: Starting task 'tracking current position' 2008-May-01 02:36:03 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2008-May-01 02:36:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-May-01 02:36:03 INFO1 execute_trackcurpos: Starting to track the current commanded position RA = 16:46:50.6 and Dec = +00:36:30.4 2008-May-01 02:36:03 LOG3 track_source: Calling 'track_source Cur-pos 164650.6 003630.4 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-May-01 02:36:03 START begin_task: Starting task 'sending tracking commands' 2008-May-01 02:36:03 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-May-01 02:36:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-May-01 02:36:03 INFO1 track_source: Starting to track Cur-pos 2008-May-01 02:36:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-May-01 02:36:03 LOG3 vw_send: To DATATAKING: set ra 164650.6 2008-May-01 02:36:03 LOG3 vw_send: To DATATAKING: set dec 003630.4 2008-May-01 02:36:03 LOG3 vw_send: To DATATAKING: pnt tr send 2008-May-01 02:36:03 LOG3 vw_send: To DATATAKING: pnt tr 164650.6 003630.4 -CJ 2008-May-01 02:36:03 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-May-01 02:36:03 STOP finish_task: Finishing task 'sending tracking commands' 2008-May-01 02:36:03 LOG5 finish_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-May-01 02:36:03 INFO2 finish_task: DONE finished sending: tracking commands 2008-May-01 02:36:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:36:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-May-01 02:36:03 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-May-01 02:36:03 START begin_task: Starting task 'waiting on telescope' 2008-May-01 02:36:03 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-May-01 02:36:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-May-01 02:36:04 LOG3 waittrk: Start waittrk 5 2008-May-01 02:36:04 START begin_task: Starting task 'waiting on telescope movement' 2008-May-01 02:36:04 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-May-01 02:36:04 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: set ra 164650.6 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: set dec 003630.4 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: vw% 164650.6 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: vw% 003630.4 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: pnt tr 164650.6 003630.4 -CJ 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-May-01 02:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-May-01 02:36:09 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-May-01 02:36:09 START begin_task: Starting task 'waiting on telescope on source' 2008-May-01 02:36:09 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-May-01 02:36:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-May-01 02:36:12 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-May-01 02:36:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-May-01 02:36:12 INFO2 waittrk: Now tracking Cur-pos 2008-May-01 02:36:12 LOG4 waittrk: Current telescope position: Az = 359.76 ZA = 17.74 2008-May-01 02:36:12 STOP finish_task: Finishing task 'waiting on telescope' 2008-May-01 02:36:12 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-May-01 02:36:12 INFO2 finish_task: DONE finished waiting: telescope on source 2008-May-01 02:36:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:36:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-May-01 02:36:12 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-May-01 02:36:12 STOP finish_task: Finishing task 'tracking current position' 2008-May-01 02:36:12 LOG5 finish_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2008-May-01 02:36:12 DONE finish_task: DONE finished tracking: current position 2008-May-01 02:36:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-01 02:36:12 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-May-01 02:36:12 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2008-May-01 02:36:12 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-May-01 02:36:12 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-May-01 02:36:12 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-May-01 02:36:12 LOG5 begin_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2008-May-01 02:36:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-May-01 02:36:12 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-May-01 02:36:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-May-01 02:36:12 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-May-01 02:36:12 START begin_task: Starting task 'waiting on ALFA rotation' 2008-May-01 02:36:12 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-May-01 02:36:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-May-01 02:36:13 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-May-01 02:36:13 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-May-01 02:36:13 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-May-01 02:36:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-May-01 02:36:13 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-May-01 02:36:13 LOG5 finish_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2008-May-01 02:36:13 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-May-01 02:36:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-01 02:36:13 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-May-01 02:36:13 LOG5 end_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2008-May-01 02:36:13 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-May-01 02:36:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-May-01 02:36:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-May-01 02:36:14 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-May-01 02:36:14 BEGIN begin_task: Starting task 'smart frequency switching' 2008-May-01 02:36:14 LOG5 begin_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2008-May-01 02:36:14 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-May-01 02:36:14 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-May-01 02:36:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-May-01 02:36:14 START begin_task: Starting task 'selecting calibration type' 2008-May-01 02:36:14 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-May-01 02:36:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-May-01 02:36:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:14 START begin_task: Starting task 'waiting on setcal' 2008-May-01 02:36:14 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-May-01 02:36:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 02:36:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-May-01 02:36:14 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-May-01 02:36:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:36:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-May-01 02:36:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:36:14 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:36:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:36:14 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:36:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-May-01 02:36:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-May-01 02:36:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-May-01 02:36:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-May-01 02:36:14 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-May-01 02:36:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-May-01 02:36:14 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-May-01 02:36:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-May-01 02:36:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-May-01 02:36:14 LOG5 finish_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-May-01 02:36:14 INFO2 finish_task: DONE finished configuring: calibration type 2008-May-01 02:36:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:36:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-May-01 02:36:14 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2008-May-01 02:36:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2008-May-01 02:36:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2008-May-01 02:36:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2008-May-01 02:36:14 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-May-01 02:36:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-May-01 02:36:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-May-01 02:36:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 02:36:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 02:36:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:36:14 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-May-01 02:36:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2008-May-01 02:36:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:36:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:36:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:36:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:36:15 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-May-01 02:36:15 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-May-01 02:36:15 START begin_task: Starting task 'adjusting WAPP power' 2008-May-01 02:36:15 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-May-01 02:36:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-May-01 02:36:15 INFO2 adjust_power: Starting to adjust WAPP power 2008-May-01 02:36:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-May-01 02:36:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-May-01 02:36:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:15 START begin_task: Starting task 'waiting on adjpwrif2' 2008-May-01 02:36:15 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-May-01 02:36:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-May-01 02:36:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-May-01 02:36:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20080501.a2010.0016.fits 2008-May-01 02:36:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080501.a2010.0016.fits} 2008-May-01 02:36:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-May-01 02:36:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-May-01 02:36:17 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-May-01 02:36:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-May-01 02:36:17 START begin_task: Starting task 'adjusting WAPP power' 2008-May-01 02:36:17 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-May-01 02:36:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-May-01 02:36:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-May-01 02:36:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-May-01 02:36:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-May-01 02:36:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-May-01 02:36:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-May-01 02:36:18 LOG5 begin_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-May-01 02:36:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-May-01 02:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:18 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 10 dB --- beam 1: 8 7 dB 2008-May-01 02:36:18 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-May-01 02:36:18 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-May-01 02:36:18 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-May-01 02:36:18 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-May-01 02:36:18 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-May-01 02:36:18 LOG5 end_task: Level: (5) ID = <10290> Status = 0 0 0 0 ok 2008-May-01 02:36:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.960 0.927 ALFA beam 1: 0.960 0.960 2008-May-01 02:36:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.107 1.028 ALFA beam 3: 1.064 0.929 2008-May-01 02:36:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.045 1.114 ALFA beam 5: 1.072 0.983 2008-May-01 02:36:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.120 1.120 ALFA beam 7: 0.975 1.000 2008-May-01 02:36:18 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-01 02:36:18 LOG5 finish_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-May-01 02:36:18 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-May-01 02:36:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:36:18 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-01 02:36:18 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-May-01 02:36:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-May-01 02:36:18 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-May-01 02:36:18 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-May-01 02:36:18 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-May-01 02:36:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-May-01 02:36:18 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-May-01 02:36:18 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-May-01 02:36:18 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-May-01 02:36:18 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-May-01 02:36:18 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-May-01 02:36:18 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:36:18 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33431 J 2008-May-01 02:36:18 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:36:18 LOG2 antvel: Parameters to Doppler: Topocentric 23778 2008 122 0.0 2008-May-01 02:36:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:36:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-May-01 02:36:18 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-May-01 02:36:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:36:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:36:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:36:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:36:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:36:18 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-May-01 02:36:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:36:18 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.792296 2008.3343149669176 18.999933 2008-May-01 02:36:18 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222160 0.608444444444448 2008-May-01 02:36:18 LOG4 log_alfabeam: ALFABEAM 1 16.779596921392159 0.713236579714373 2008-May-01 02:36:18 LOG4 log_alfabeam: ALFABEAM 2 16.774981429788863 0.643755700807715 2008-May-01 02:36:18 LOG4 log_alfabeam: ALFABEAM 3 16.776084969467746 0.538900496454343 2008-May-01 02:36:18 LOG4 log_alfabeam: ALFABEAM 4 16.781860753072390 0.503667951063267 2008-May-01 02:36:18 LOG4 log_alfabeam: ALFABEAM 5 16.786484867135531 0.573537374198429 2008-May-01 02:36:18 LOG4 log_alfabeam: ALFABEAM 6 16.785324594358361 0.678249143863952 2008-May-01 02:36:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200033 2008-May-01 02:36:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:36:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:36:19 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-May-01 02:36:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:36:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:36:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23780.00 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.152 < 0.8)! 2008-May-01 02:36:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 0.152 0.994 0.977 2008-May-01 02:36:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.122 1.055 1.109 0.947 2008-May-01 02:36:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.137 1.140 1.012 2008-May-01 02:36:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 1.124 0.982 1.003 2008-May-01 02:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.157 and 1.139 (still bad) 2008-May-01 02:36:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:36:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:36:30 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-May-01 02:36:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:36:30 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-May-01 02:36:30 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-May-01 02:36:30 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-May-01 02:36:30 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-May-01 02:36:30 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:36:30 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:36:30 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:36:30 LOG2 antvel: Parameters to Doppler: Topocentric 23790 2008 122 0.0 2008-May-01 02:36:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:36:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-May-01 02:36:30 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-May-01 02:36:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:36:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:36:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:36:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:36:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:36:30 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-May-01 02:36:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:36:30 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.795639 2008.3343153471747 18.999933 2008-May-01 02:36:30 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222330 0.608444444444438 2008-May-01 02:36:30 LOG4 log_alfabeam: ALFABEAM 1 16.779615951513325 0.713282154557740 2008-May-01 02:36:30 LOG4 log_alfabeam: ALFABEAM 2 16.774987861797225 0.643990052524718 2008-May-01 02:36:30 LOG4 log_alfabeam: ALFABEAM 3 16.776072360873560 0.539090163367371 2008-May-01 02:36:30 LOG4 log_alfabeam: ALFABEAM 4 16.781841726271477 0.503621835530725 2008-May-01 02:36:30 LOG4 log_alfabeam: ALFABEAM 5 16.786478507930688 0.573302122296203 2008-May-01 02:36:30 LOG4 log_alfabeam: ALFABEAM 6 16.785337251119884 0.678060896722224 2008-May-01 02:36:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200034 2008-May-01 02:36:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:36:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:36:31 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-May-01 02:36:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:36:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:36:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.159 and 1.141 (still bad) 2008-May-01 02:36:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23792.00 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.159 and 1.132 (still bad) 2008-May-01 02:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.133 (still bad) 2008-May-01 02:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.133 (still bad) 2008-May-01 02:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.132 (still bad) 2008-May-01 02:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.131 (still bad) 2008-May-01 02:36:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:36:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:36:42 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-May-01 02:36:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:36:42 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-May-01 02:36:42 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-May-01 02:36:42 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-May-01 02:36:42 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-May-01 02:36:42 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:36:42 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:36:42 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:36:42 LOG2 antvel: Parameters to Doppler: Topocentric 23802 2008 122 0.0 2008-May-01 02:36:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:36:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-May-01 02:36:42 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-May-01 02:36:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:36:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:36:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:36:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:36:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:36:42 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-May-01 02:36:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:36:42 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.798981 2008.3343157274317 18.999933 2008-May-01 02:36:42 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222224 0.608444444444447 2008-May-01 02:36:42 LOG4 log_alfabeam: ALFABEAM 1 16.779634983389798 0.713326936968455 2008-May-01 02:36:42 LOG4 log_alfabeam: ALFABEAM 2 16.774994334058292 0.644224060446342 2008-May-01 02:36:42 LOG4 log_alfabeam: ALFABEAM 3 16.776059791119835 0.539280279526773 2008-May-01 02:36:42 LOG4 log_alfabeam: ALFABEAM 4 16.781822697507895 0.503576512367230 2008-May-01 02:36:42 LOG4 log_alfabeam: ALFABEAM 5 16.786472108103268 0.573067208225694 2008-May-01 02:36:42 LOG4 log_alfabeam: ALFABEAM 6 16.785349869560463 0.677872195695648 2008-May-01 02:36:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200035 2008-May-01 02:36:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:36:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:36:43 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-May-01 02:36:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:36:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:36:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23804.00 2008-May-01 02:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.131 (still bad) 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.131 (still bad) 2008-May-01 02:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.162 and 1.130 (still bad) 2008-May-01 02:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.131 (still bad) 2008-May-01 02:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.161 and 1.130 (still bad) 2008-May-01 02:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.157 and 1.130 (still bad) 2008-May-01 02:36:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:36:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:36:54 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-May-01 02:36:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:36:54 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-May-01 02:36:54 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-May-01 02:36:54 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-May-01 02:36:54 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-May-01 02:36:54 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:36:54 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:36:54 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:36:54 LOG2 antvel: Parameters to Doppler: Topocentric 23814 2008 122 0.0 2008-May-01 02:36:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:36:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-May-01 02:36:54 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-May-01 02:36:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:36:54 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:36:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:36:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:36:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:36:54 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-May-01 02:36:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:36:54 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.802324 2008.3343161076889 18.999933 2008-May-01 02:36:54 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222309 0.608444444444445 2008-May-01 02:36:54 LOG4 log_alfabeam: ALFABEAM 1 16.779654027970270 0.713370952823088 2008-May-01 02:36:54 LOG4 log_alfabeam: ALFABEAM 2 16.775000850288475 0.644457859258230 2008-May-01 02:36:54 LOG4 log_alfabeam: ALFABEAM 3 16.776047252968187 0.539470954232043 2008-May-01 02:36:54 LOG4 log_alfabeam: ALFABEAM 4 16.781803655834423 0.503531955398461 2008-May-01 02:36:54 LOG4 log_alfabeam: ALFABEAM 5 16.786465663977989 0.572832496802964 2008-May-01 02:36:54 LOG4 log_alfabeam: ALFABEAM 6 16.785362456948889 0.677682932264593 2008-May-01 02:36:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200036 2008-May-01 02:36:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:36:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:36:55 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-May-01 02:36:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:36:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:36:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:36:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:36:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23816.00 2008-May-01 02:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.157 and 1.130 (still bad) 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.144 and 1.125 (still bad) 2008-May-01 02:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.124 (still bad) 2008-May-01 02:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.125 (still bad) 2008-May-01 02:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.125 (still bad) 2008-May-01 02:37:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.125 (still bad) 2008-May-01 02:37:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:37:06 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-May-01 02:37:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:37:06 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-May-01 02:37:06 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-May-01 02:37:06 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-May-01 02:37:06 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-May-01 02:37:06 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:37:06 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:37:06 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:37:06 LOG2 antvel: Parameters to Doppler: Topocentric 23826 2008 122 0.0 2008-May-01 02:37:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:37:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-May-01 02:37:06 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-May-01 02:37:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:37:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:37:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:37:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:37:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:37:06 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-May-01 02:37:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:37:06 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.805666 2008.3343164879459 18.999933 2008-May-01 02:37:06 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222174 0.608444444444449 2008-May-01 02:37:06 LOG4 log_alfabeam: ALFABEAM 1 16.779673073420657 0.713414174920325 2008-May-01 02:37:06 LOG4 log_alfabeam: ALFABEAM 2 16.775007406431186 0.644691303754192 2008-May-01 02:37:06 LOG4 log_alfabeam: ALFABEAM 3 16.776034754202829 0.539662068902041 2008-May-01 02:37:06 LOG4 log_alfabeam: ALFABEAM 4 16.781784613084039 0.503488192175224 2008-May-01 02:37:06 LOG4 log_alfabeam: ALFABEAM 5 16.786459179565338 0.572598133824746 2008-May-01 02:37:06 LOG4 log_alfabeam: ALFABEAM 6 16.785375005470687 0.677493224099315 2008-May-01 02:37:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200037 2008-May-01 02:37:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:37:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:37:07 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-May-01 02:37:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:37:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:37:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23828.00 2008-May-01 02:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.125 (still bad) 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.117 (still bad) 2008-May-01 02:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.115 (still bad) 2008-May-01 02:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.116 (still bad) 2008-May-01 02:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.117 (still bad) 2008-May-01 02:37:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:37:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:37:18 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-May-01 02:37:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:37:18 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-May-01 02:37:18 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-May-01 02:37:18 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-May-01 02:37:18 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-May-01 02:37:18 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:37:18 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:37:18 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:37:18 LOG2 antvel: Parameters to Doppler: Topocentric 23838 2008 122 0.0 2008-May-01 02:37:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:37:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-May-01 02:37:18 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-May-01 02:37:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:37:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:37:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:37:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:37:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:37:18 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-May-01 02:37:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:37:18 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.809008 2008.3343168682029 18.999933 2008-May-01 02:37:18 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222273 0.608444444444446 2008-May-01 02:37:18 LOG4 log_alfabeam: ALFABEAM 1 16.779692124995993 0.713456615730407 2008-May-01 02:37:18 LOG4 log_alfabeam: ALFABEAM 2 16.775014004267494 0.644924458602944 2008-May-01 02:37:18 LOG4 log_alfabeam: ALFABEAM 3 16.776022291347367 0.539853675959165 2008-May-01 02:37:18 LOG4 log_alfabeam: ALFABEAM 4 16.781765564002217 0.503445210091339 2008-May-01 02:37:18 LOG4 log_alfabeam: ALFABEAM 5 16.786452653102600 0.572364054395366 2008-May-01 02:37:18 LOG4 log_alfabeam: ALFABEAM 6 16.785387518613831 0.677303019134150 2008-May-01 02:37:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200038 2008-May-01 02:37:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:37:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:37:19 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-May-01 02:37:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:37:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.118 (still bad) 2008-May-01 02:37:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23840.00 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.118 (still bad) 2008-May-01 02:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.114 (still bad) 2008-May-01 02:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.115 (still bad) 2008-May-01 02:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.114 (still bad) 2008-May-01 02:37:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.148 < 0.8)! 2008-May-01 02:37:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 0.148 0.937 0.951 2008-May-01 02:37:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 1.020 1.055 0.926 2008-May-01 02:37:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 1.105 1.059 0.973 2008-May-01 02:37:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 1.114 0.968 0.993 2008-May-01 02:37:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:37:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:37:30 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-May-01 02:37:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:37:30 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-May-01 02:37:30 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-May-01 02:37:30 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-May-01 02:37:30 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-May-01 02:37:30 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:37:30 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:37:30 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:37:30 LOG2 antvel: Parameters to Doppler: Topocentric 23850 2008 122 0.0 2008-May-01 02:37:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:37:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-May-01 02:37:30 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-May-01 02:37:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:37:30 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:37:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:37:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:37:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:37:30 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-May-01 02:37:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:37:30 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.812351 2008.3343172484599 18.999933 2008-May-01 02:37:30 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222337 0.608444444444444 2008-May-01 02:37:30 LOG4 log_alfabeam: ALFABEAM 1 16.779711187957933 0.713498286843328 2008-May-01 02:37:30 LOG4 log_alfabeam: ALFABEAM 2 16.775020645625663 0.645157388148109 2008-May-01 02:37:30 LOG4 log_alfabeam: ALFABEAM 3 16.776009860965953 0.540045828381872 2008-May-01 02:37:30 LOG4 log_alfabeam: ALFABEAM 4 16.781746503327977 0.503402997420578 2008-May-01 02:37:30 LOG4 log_alfabeam: ALFABEAM 5 16.786446082778976 0.572130193937452 2008-May-01 02:37:30 LOG4 log_alfabeam: ALFABEAM 6 16.785399999826645 0.677112264742442 2008-May-01 02:37:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200039 2008-May-01 02:37:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:37:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:37:31 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-May-01 02:37:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:37:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:37:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.115 (still bad) 2008-May-01 02:37:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23852.00 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.115 (still bad) 2008-May-01 02:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.113 (still bad) 2008-May-01 02:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.112 (still bad) 2008-May-01 02:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.112 (still bad) 2008-May-01 02:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.113 (still bad) 2008-May-01 02:37:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:37:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:37:42 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-May-01 02:37:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:37:42 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-May-01 02:37:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-May-01 02:37:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 02:37:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 02:37:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:37:42 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-May-01 02:37:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:37:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 02:37:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:37:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:37:42 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-May-01 02:37:42 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-May-01 02:37:42 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-May-01 02:37:42 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-May-01 02:37:42 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:37:42 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:37:42 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:37:42 LOG2 antvel: Parameters to Doppler: Topocentric 23862 2008 122 0.0 2008-May-01 02:37:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:37:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-May-01 02:37:42 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-May-01 02:37:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:37:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:37:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:37:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:37:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:37:42 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-May-01 02:37:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:37:42 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.815693 2008.3343176287171 18.999933 2008-May-01 02:37:42 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222280 0.608444444444444 2008-May-01 02:37:42 LOG4 log_alfabeam: ALFABEAM 1 16.779730250460055 0.713539162625422 2008-May-01 02:37:42 LOG4 log_alfabeam: ALFABEAM 2 16.775027326364970 0.645389947768539 2008-May-01 02:37:42 LOG4 log_alfabeam: ALFABEAM 3 16.775997470769695 0.540238406604999 2008-May-01 02:37:42 LOG4 log_alfabeam: ALFABEAM 4 16.781727442906135 0.503361580146505 2008-May-01 02:37:42 LOG4 log_alfabeam: ALFABEAM 5 16.786439472689455 0.571896697675340 2008-May-01 02:37:42 LOG4 log_alfabeam: ALFABEAM 6 16.785412441365018 0.676921079587755 2008-May-01 02:37:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200040 2008-May-01 02:37:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:37:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:37:43 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-May-01 02:37:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:37:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:37:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23864.00 2008-May-01 02:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.114 (still bad) 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.316 (still bad) 2008-May-01 02:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.190 and 1.537 (still bad) 2008-May-01 02:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.534 (still bad) 2008-May-01 02:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.532 (still bad) 2008-May-01 02:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.534 (still bad) 2008-May-01 02:37:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:37:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:37:54 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-May-01 02:37:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:37:54 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-May-01 02:37:54 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-May-01 02:37:54 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-May-01 02:37:54 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-May-01 02:37:54 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:37:54 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:37:54 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:37:54 LOG2 antvel: Parameters to Doppler: Topocentric 23874 2008 122 0.0 2008-May-01 02:37:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:37:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-May-01 02:37:54 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-May-01 02:37:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:37:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:37:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:37:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:37:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:37:54 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-May-01 02:37:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:37:54 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.819036 2008.3343180089742 18.999933 2008-May-01 02:37:54 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222266 0.608444444444443 2008-May-01 02:37:54 LOG4 log_alfabeam: ALFABEAM 1 16.779749323468362 0.713579266889912 2008-May-01 02:37:54 LOG4 log_alfabeam: ALFABEAM 2 16.775034050313131 0.645622271391253 2008-May-01 02:37:54 LOG4 log_alfabeam: ALFABEAM 3 16.775985113615835 0.540431521234576 2008-May-01 02:37:54 LOG4 log_alfabeam: ALFABEAM 4 16.781708371772005 0.503320934157627 2008-May-01 02:37:54 LOG4 log_alfabeam: ALFABEAM 5 16.786432819045501 0.571663431168186 2008-May-01 02:37:54 LOG4 log_alfabeam: ALFABEAM 6 16.785424850400329 0.676729353832824 2008-May-01 02:37:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200041 2008-May-01 02:37:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:37:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:37:55 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-May-01 02:37:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:37:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:37:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:37:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:37:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23876.00 2008-May-01 02:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.532 (still bad) 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.540 (still bad) 2008-May-01 02:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.541 (still bad) 2008-May-01 02:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.187 and 1.541 (still bad) 2008-May-01 02:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.540 (still bad) 2008-May-01 02:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.539 (still bad) 2008-May-01 02:38:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:38:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:38:06 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-May-01 02:38:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:38:06 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-May-01 02:38:06 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-May-01 02:38:06 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-May-01 02:38:06 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-May-01 02:38:06 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:38:06 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:38:06 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:38:06 LOG2 antvel: Parameters to Doppler: Topocentric 23886 2008 122 0.0 2008-May-01 02:38:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:38:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-May-01 02:38:06 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-May-01 02:38:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:38:06 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:38:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:38:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:38:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:38:06 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-May-01 02:38:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:38:06 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.822378 2008.3343183892312 18.999933 2008-May-01 02:38:06 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222295 0.608444444444444 2008-May-01 02:38:06 LOG4 log_alfabeam: ALFABEAM 1 16.779768395129977 0.713618575050692 2008-May-01 02:38:06 LOG4 log_alfabeam: ALFABEAM 2 16.775040813274284 0.645854214803848 2008-May-01 02:38:06 LOG4 log_alfabeam: ALFABEAM 3 16.775972797166286 0.540625052065934 2008-May-01 02:38:06 LOG4 log_alfabeam: ALFABEAM 4 16.781689301777405 0.503281084390022 2008-May-01 02:38:06 LOG4 log_alfabeam: ALFABEAM 5 16.786426125997433 0.571430539239771 2008-May-01 02:38:06 LOG4 log_alfabeam: ALFABEAM 6 16.785437219236343 0.676537206787138 2008-May-01 02:38:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200042 2008-May-01 02:38:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:38:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:38:07 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-May-01 02:38:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:38:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:38:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23888.00 2008-May-01 02:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.540 (still bad) 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.157 and 1.537 (still bad) 2008-May-01 02:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.158 and 1.537 (still bad) 2008-May-01 02:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.158 and 1.539 (still bad) 2008-May-01 02:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.158 and 1.538 (still bad) 2008-May-01 02:38:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:38:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:38:18 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-May-01 02:38:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:38:18 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-May-01 02:38:18 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-May-01 02:38:18 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-May-01 02:38:18 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-May-01 02:38:18 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:38:18 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:38:18 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:38:18 LOG2 antvel: Parameters to Doppler: Topocentric 23898 2008 122 0.0 2008-May-01 02:38:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:38:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-May-01 02:38:18 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-May-01 02:38:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:38:18 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:38:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:38:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:38:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:38:18 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-May-01 02:38:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:38:18 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.825721 2008.3343187694882 18.999933 2008-May-01 02:38:18 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222266 0.608444444444443 2008-May-01 02:38:18 LOG4 log_alfabeam: ALFABEAM 1 16.779787476415883 0.713657110093155 2008-May-01 02:38:18 LOG4 log_alfabeam: ALFABEAM 2 16.775047619119924 0.646085911612060 2008-May-01 02:38:18 LOG4 log_alfabeam: ALFABEAM 3 16.775960514317191 0.540819110212380 2008-May-01 02:38:18 LOG4 log_alfabeam: ALFABEAM 4 16.781670221952307 0.503242007560011 2008-May-01 02:38:18 LOG4 log_alfabeam: ALFABEAM 5 16.786419389712915 0.571197887764528 2008-May-01 02:38:18 LOG4 log_alfabeam: ALFABEAM 6 16.785449555005886 0.676344528101542 2008-May-01 02:38:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200043 2008-May-01 02:38:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:38:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:38:19 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-May-01 02:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.158 and 1.539 (still bad) 2008-May-01 02:38:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:38:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:38:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23900.00 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.533 (still bad) 2008-May-01 02:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.174 and 1.533 (still bad) 2008-May-01 02:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.175 and 1.531 (still bad) 2008-May-01 02:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.164 and 1.531 (still bad) 2008-May-01 02:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.164 and 1.531 (still bad) 2008-May-01 02:38:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:38:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:38:30 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-May-01 02:38:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:38:30 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-May-01 02:38:30 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-May-01 02:38:30 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-May-01 02:38:30 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-May-01 02:38:30 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:38:30 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:38:30 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:38:30 LOG2 antvel: Parameters to Doppler: Topocentric 23910 2008 122 0.0 2008-May-01 02:38:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:38:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-May-01 02:38:30 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-May-01 02:38:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:38:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:38:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:38:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:38:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:38:30 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-May-01 02:38:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:38:30 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.829063 2008.3343191497452 18.999933 2008-May-01 02:38:30 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222298 0.608444444444448 2008-May-01 02:38:30 LOG4 log_alfabeam: ALFABEAM 1 16.779806555468276 0.713694848480127 2008-May-01 02:38:30 LOG4 log_alfabeam: ALFABEAM 2 16.775054463599428 0.646317218027042 2008-May-01 02:38:30 LOG4 log_alfabeam: ALFABEAM 3 16.775948272680413 0.541013574842950 2008-May-01 02:38:30 LOG4 log_alfabeam: ALFABEAM 4 16.781651144153685 0.503203727554723 2008-May-01 02:38:30 LOG4 log_alfabeam: ALFABEAM 5 16.786412614397385 0.570965621150745 2008-May-01 02:38:30 LOG4 log_alfabeam: ALFABEAM 6 16.785461850062529 0.676151437718377 2008-May-01 02:38:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200044 2008-May-01 02:38:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:38:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:38:31 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-May-01 02:38:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:38:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:38:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little and too much power (0.162 < 0.8 & 1.533 > 1.4)! 2008-May-01 02:38:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.295 0.162 1.273 1.272 2008-May-01 02:38:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.486 1.386 1.447 1.238 2008-May-01 02:38:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.414 1.498 1.477 1.288 2008-May-01 02:38:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.533 1.522 1.337 1.358 2008-May-01 02:38:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23912.00 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.164 and 1.521 (still bad) 2008-May-01 02:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.166 and 1.520 (still bad) 2008-May-01 02:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.521 (still bad) 2008-May-01 02:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.520 (still bad) 2008-May-01 02:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.168 and 1.520 (still bad) 2008-May-01 02:38:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:38:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:38:42 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-May-01 02:38:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:38:42 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-May-01 02:38:42 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-May-01 02:38:42 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-May-01 02:38:42 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-May-01 02:38:42 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:38:42 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:38:42 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:38:42 LOG2 antvel: Parameters to Doppler: Topocentric 23922 2008 122 0.0 2008-May-01 02:38:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:38:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-May-01 02:38:42 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-May-01 02:38:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:38:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:38:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:38:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:38:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:38:42 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-May-01 02:38:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:38:42 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.832406 2008.3343195300024 18.999933 2008-May-01 02:38:42 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222288 0.608444444444450 2008-May-01 02:38:42 LOG4 log_alfabeam: ALFABEAM 1 16.779825643262399 0.713731812367968 2008-May-01 02:38:42 LOG4 log_alfabeam: ALFABEAM 2 16.775061350627450 0.646548267323104 2008-May-01 02:38:42 LOG4 log_alfabeam: ALFABEAM 3 16.775936065191214 0.541208557569262 2008-May-01 02:38:42 LOG4 log_alfabeam: ALFABEAM 4 16.781632057407023 0.503166221919411 2008-May-01 02:38:42 LOG4 log_alfabeam: ALFABEAM 5 16.786405796174524 0.570733605598247 2008-May-01 02:38:42 LOG4 log_alfabeam: ALFABEAM 6 16.785474111500189 0.675957824785403 2008-May-01 02:38:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200045 2008-May-01 02:38:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:38:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:38:43 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-May-01 02:38:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:38:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:38:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23924.00 2008-May-01 02:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.168 and 1.519 (still bad) 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.168 and 1.518 (still bad) 2008-May-01 02:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.517 (still bad) 2008-May-01 02:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.518 (still bad) 2008-May-01 02:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.170 and 1.517 (still bad) 2008-May-01 02:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.517 (still bad) 2008-May-01 02:38:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:38:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:38:54 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-May-01 02:38:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:38:54 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-May-01 02:38:54 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-May-01 02:38:54 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-May-01 02:38:54 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-May-01 02:38:54 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:38:54 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:38:54 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:38:54 LOG2 antvel: Parameters to Doppler: Topocentric 23934 2008 122 0.0 2008-May-01 02:38:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:38:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-May-01 02:38:54 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-May-01 02:38:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:38:54 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:38:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:38:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:38:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:38:54 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-May-01 02:38:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:38:54 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.835748 2008.3343199102594 18.999933 2008-May-01 02:38:54 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222252 0.608444444444446 2008-May-01 02:38:54 LOG4 log_alfabeam: ALFABEAM 1 16.779844727936513 0.713767979269742 2008-May-01 02:38:54 LOG4 log_alfabeam: ALFABEAM 2 16.775068275899663 0.646778916149665 2008-May-01 02:38:54 LOG4 log_alfabeam: ALFABEAM 3 16.775923899411055 0.541403936947829 2008-May-01 02:38:54 LOG4 log_alfabeam: ALFABEAM 4 16.781612973573424 0.503129513490950 2008-May-01 02:38:54 LOG4 log_alfabeam: ALFABEAM 5 16.786398939304643 0.570501985085027 2008-May-01 02:38:54 LOG4 log_alfabeam: ALFABEAM 6 16.785486331722176 0.675763809864283 2008-May-01 02:38:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200046 2008-May-01 02:38:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:38:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:38:55 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-May-01 02:38:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:38:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:38:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:38:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23936.00 2008-May-01 02:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.517 (still bad) 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.516 (still bad) 2008-May-01 02:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.517 (still bad) 2008-May-01 02:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.176 and 1.517 (still bad) 2008-May-01 02:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.181 and 1.519 (still bad) 2008-May-01 02:39:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:39:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:39:06 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-May-01 02:39:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:39:06 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-May-01 02:39:06 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-May-01 02:39:06 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-May-01 02:39:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-May-01 02:39:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 02:39:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 02:39:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:39:06 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-May-01 02:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.176 and 1.517 (still bad) 2008-May-01 02:39:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:39:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:39:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:39:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:39:06 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-May-01 02:39:06 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-May-01 02:39:06 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-May-01 02:39:06 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-May-01 02:39:06 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-May-01 02:39:06 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:39:06 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:39:06 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:39:06 LOG2 antvel: Parameters to Doppler: Topocentric 23946 2008 122 0.0 2008-May-01 02:39:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:39:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-May-01 02:39:06 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-May-01 02:39:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:39:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:39:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:39:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:39:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:39:06 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-May-01 02:39:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:39:06 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.839091 2008.3343202905164 18.999933 2008-May-01 02:39:06 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222231 0.608444444444444 2008-May-01 02:39:06 LOG4 log_alfabeam: ALFABEAM 1 16.779863820469544 0.713803370511623 2008-May-01 02:39:06 LOG4 log_alfabeam: ALFABEAM 2 16.775075243373593 0.647009297439553 2008-May-01 02:39:06 LOG4 log_alfabeam: ALFABEAM 3 16.775911768314984 0.541599825079363 2008-May-01 02:39:06 LOG4 log_alfabeam: ALFABEAM 4 16.781593881674919 0.503093580644798 2008-May-01 02:39:06 LOG4 log_alfabeam: ALFABEAM 5 16.786392039868115 0.570270626146513 2008-May-01 02:39:06 LOG4 log_alfabeam: ALFABEAM 6 16.785498517783431 0.675569281608851 2008-May-01 02:39:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200047 2008-May-01 02:39:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:39:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:39:07 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-May-01 02:39:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:39:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:39:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23948.00 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.139 (still bad) 2008-May-01 02:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.137 and 1.136 (still bad) 2008-May-01 02:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.141 and 1.137 (still bad) 2008-May-01 02:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.141 and 1.136 (still bad) 2008-May-01 02:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.136 (still bad) 2008-May-01 02:39:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:39:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:39:18 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-May-01 02:39:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:39:18 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-May-01 02:39:18 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-May-01 02:39:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-May-01 02:39:18 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-May-01 02:39:18 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:39:18 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:39:18 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:39:18 LOG2 antvel: Parameters to Doppler: Topocentric 23958 2008 122 0.0 2008-May-01 02:39:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:39:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-May-01 02:39:18 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-May-01 02:39:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:39:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:39:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:39:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:39:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:39:18 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-May-01 02:39:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:39:18 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.842433 2008.3343206707734 18.999933 2008-May-01 02:39:18 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222249 0.608444444444449 2008-May-01 02:39:18 LOG4 log_alfabeam: ALFABEAM 1 16.779882908997052 0.713837964657802 2008-May-01 02:39:18 LOG4 log_alfabeam: ALFABEAM 2 16.775082248691170 0.647239268294972 2008-May-01 02:39:18 LOG4 log_alfabeam: ALFABEAM 3 16.775899679413012 0.541796099921601 2008-May-01 02:39:18 LOG4 log_alfabeam: ALFABEAM 4 16.781574793575359 0.503058445166526 2008-May-01 02:39:18 LOG4 log_alfabeam: ALFABEAM 5 16.786385102179128 0.570039672315653 2008-May-01 02:39:18 LOG4 log_alfabeam: ALFABEAM 6 16.785510662137739 0.675374361186400 2008-May-01 02:39:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200048 2008-May-01 02:39:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:39:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:39:19 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-May-01 02:39:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:39:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:39:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23960.00 2008-May-01 02:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.136 (still bad) 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.128 (still bad) 2008-May-01 02:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.129 (still bad) 2008-May-01 02:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.130 (still bad) 2008-May-01 02:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.128 (still bad) 2008-May-01 02:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.143 and 1.130 (still bad) 2008-May-01 02:39:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:39:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:39:30 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-May-01 02:39:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:39:30 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-May-01 02:39:30 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-May-01 02:39:30 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-May-01 02:39:30 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-May-01 02:39:30 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:39:30 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:39:30 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:39:30 LOG2 antvel: Parameters to Doppler: Topocentric 23970 2008 122 0.0 2008-May-01 02:39:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:39:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-May-01 02:39:30 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-May-01 02:39:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:39:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:39:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:39:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:39:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:39:30 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-May-01 02:39:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:39:30 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.845776 2008.3343210510304 18.999933 2008-May-01 02:39:30 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222256 0.608444444444438 2008-May-01 02:39:30 LOG4 log_alfabeam: ALFABEAM 1 16.779902004500507 0.713871782203459 2008-May-01 02:39:30 LOG4 log_alfabeam: ALFABEAM 2 16.775089295852673 0.647468961297276 2008-May-01 02:39:30 LOG4 log_alfabeam: ALFABEAM 3 16.775887625720433 0.541992874055285 2008-May-01 02:39:30 LOG4 log_alfabeam: ALFABEAM 4 16.781555698293761 0.503024086262634 2008-May-01 02:39:30 LOG4 log_alfabeam: ALFABEAM 5 16.786378122275202 0.569808990473534 2008-May-01 02:39:30 LOG4 log_alfabeam: ALFABEAM 6 16.785522771800260 0.675178936765810 2008-May-01 02:39:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200049 2008-May-01 02:39:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:39:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:39:31 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-May-01 02:39:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:39:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:39:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23972.00 2008-May-01 02:39:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.142 < 0.8)! 2008-May-01 02:39:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 0.142 0.970 0.963 2008-May-01 02:39:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 1.036 1.095 0.941 2008-May-01 02:39:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 1.128 1.115 0.996 2008-May-01 02:39:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.130 1.123 0.984 1.002 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.128 (still bad) 2008-May-01 02:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.127 (still bad) 2008-May-01 02:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.129 (still bad) 2008-May-01 02:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.128 (still bad) 2008-May-01 02:39:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:39:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:39:42 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-May-01 02:39:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:39:42 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-May-01 02:39:42 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-May-01 02:39:42 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-May-01 02:39:42 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-May-01 02:39:42 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:39:42 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:39:42 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:39:42 LOG2 antvel: Parameters to Doppler: Topocentric 23982 2008 122 0.0 2008-May-01 02:39:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:39:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-May-01 02:39:42 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-May-01 02:39:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:39:42 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:39:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:39:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:39:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:39:42 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-May-01 02:39:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:39:42 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.849118 2008.3343214312877 18.999933 2008-May-01 02:39:42 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222241 0.608444444444441 2008-May-01 02:39:42 LOG4 log_alfabeam: ALFABEAM 1 16.779921095114144 0.713904802764400 2008-May-01 02:39:42 LOG4 log_alfabeam: ALFABEAM 2 16.775096380446968 0.647698234015856 2008-May-01 02:39:42 LOG4 log_alfabeam: ALFABEAM 3 16.775875614695181 0.542190024853390 2008-May-01 02:39:42 LOG4 log_alfabeam: ALFABEAM 4 16.781536607695752 0.502990524666915 2008-May-01 02:39:42 LOG4 log_alfabeam: ALFABEAM 5 16.786371104523898 0.569578723693623 2008-May-01 02:39:42 LOG4 log_alfabeam: ALFABEAM 6 16.785534839276352 0.674983130106349 2008-May-01 02:39:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200050 2008-May-01 02:39:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:39:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:39:43 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-May-01 02:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.142 and 1.129 (still bad) 2008-May-01 02:39:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:39:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:39:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23984.00 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.140 and 1.128 (still bad) 2008-May-01 02:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.122 (still bad) 2008-May-01 02:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.124 (still bad) 2008-May-01 02:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.124 (still bad) 2008-May-01 02:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.124 (still bad) 2008-May-01 02:39:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:39:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:39:54 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-May-01 02:39:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:39:54 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-May-01 02:39:54 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-May-01 02:39:54 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-May-01 02:39:54 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-May-01 02:39:54 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:39:54 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:39:54 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:39:54 LOG2 antvel: Parameters to Doppler: Topocentric 23994 2008 122 0.0 2008-May-01 02:39:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:39:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-May-01 02:39:54 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-May-01 02:39:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:39:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:39:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:39:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:39:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:39:54 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-May-01 02:39:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:39:54 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.852460 2008.3343218115447 18.999933 2008-May-01 02:39:54 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222241 0.608444444444445 2008-May-01 02:39:54 LOG4 log_alfabeam: ALFABEAM 1 16.779940186108874 0.713937036476800 2008-May-01 02:39:54 LOG4 log_alfabeam: ALFABEAM 2 16.775103504379075 0.647927150227792 2008-May-01 02:39:54 LOG4 log_alfabeam: ALFABEAM 3 16.775863642969739 0.542387606182629 2008-May-01 02:39:54 LOG4 log_alfabeam: ALFABEAM 4 16.781517516511002 0.502957750106748 2008-May-01 02:39:54 LOG4 log_alfabeam: ALFABEAM 5 16.786364047038006 0.569348807955421 2008-May-01 02:39:54 LOG4 log_alfabeam: ALFABEAM 6 16.785546867947275 0.674786887685949 2008-May-01 02:39:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200051 2008-May-01 02:39:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:39:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:39:55 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-May-01 02:39:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:39:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:39:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:39:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.123 (still bad) 2008-May-01 02:39:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23996.00 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.115 (still bad) 2008-May-01 02:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.114 (still bad) 2008-May-01 02:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.116 (still bad) 2008-May-01 02:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.115 (still bad) 2008-May-01 02:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.146 and 1.115 (still bad) 2008-May-01 02:40:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:40:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:40:06 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-May-01 02:40:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:40:06 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-May-01 02:40:06 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-May-01 02:40:06 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-May-01 02:40:06 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-May-01 02:40:06 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:40:06 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:40:06 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:40:06 LOG2 antvel: Parameters to Doppler: Topocentric 24006 2008 122 0.0 2008-May-01 02:40:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:40:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-May-01 02:40:06 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-May-01 02:40:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:40:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:40:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:40:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:40:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:40:06 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-May-01 02:40:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:40:06 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.855803 2008.3343221918017 18.999933 2008-May-01 02:40:06 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222252 0.608444444444441 2008-May-01 02:40:06 LOG4 log_alfabeam: ALFABEAM 1 16.779959282756227 0.713968492590022 2008-May-01 02:40:06 LOG4 log_alfabeam: ALFABEAM 2 16.775110669598185 0.648155773312486 2008-May-01 02:40:06 LOG4 log_alfabeam: ALFABEAM 3 16.775851707220369 0.542585672399258 2008-May-01 02:40:06 LOG4 log_alfabeam: ALFABEAM 4 16.781498419467805 0.502925753196572 2008-May-01 02:40:06 LOG4 log_alfabeam: ALFABEAM 5 16.786356947884862 0.569119179630058 2008-May-01 02:40:06 LOG4 log_alfabeam: ALFABEAM 6 16.785558861150832 0.674590155487357 2008-May-01 02:40:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200052 2008-May-01 02:40:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:40:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:40:07 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-May-01 02:40:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:40:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:40:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24008.00 2008-May-01 02:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.114 (still bad) 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.113 (still bad) 2008-May-01 02:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.120 and 1.113 (still bad) 2008-May-01 02:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.119 and 1.114 (still bad) 2008-May-01 02:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.134 and 1.115 (still bad) 2008-May-01 02:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.145 and 1.115 (still bad) 2008-May-01 02:40:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:40:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:40:18 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-May-01 02:40:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:40:18 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-May-01 02:40:18 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-May-01 02:40:18 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-May-01 02:40:18 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-May-01 02:40:18 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:40:18 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:40:18 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:40:18 LOG2 antvel: Parameters to Doppler: Topocentric 24018 2008 122 0.0 2008-May-01 02:40:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:40:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-May-01 02:40:18 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-May-01 02:40:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:40:18 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:40:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:40:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-May-01 02:40:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:40:18 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2008-May-01 02:40:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:40:18 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.859145 2008.3343225720587 18.999933 2008-May-01 02:40:18 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222256 0.608444444444446 2008-May-01 02:40:18 LOG4 log_alfabeam: ALFABEAM 1 16.779978373190776 0.713999152297334 2008-May-01 02:40:18 LOG4 log_alfabeam: ALFABEAM 2 16.775117871615080 0.648383961566461 2008-May-01 02:40:18 LOG4 log_alfabeam: ALFABEAM 3 16.775839814825780 0.542784100025701 2008-May-01 02:40:18 LOG4 log_alfabeam: ALFABEAM 4 16.781479328432013 0.502894553092245 2008-May-01 02:40:18 LOG4 log_alfabeam: ALFABEAM 5 16.786349811511567 0.568889981075001 2008-May-01 02:40:18 LOG4 log_alfabeam: ALFABEAM 6 16.785570811470887 0.674393056131362 2008-May-01 02:40:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200053 2008-May-01 02:40:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:40:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:40:19 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-May-01 02:40:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:40:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:40:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24020.00 2008-May-01 02:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.145 and 1.115 (still bad) 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.113 (still bad) 2008-May-01 02:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.113 (still bad) 2008-May-01 02:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.147 and 1.113 (still bad) 2008-May-01 02:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.113 (still bad) 2008-May-01 02:40:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:40:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:40:30 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-May-01 02:40:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:40:30 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2008-May-01 02:40:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-May-01 02:40:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-May-01 02:40:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-May-01 02:40:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:40:30 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-May-01 02:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.148 and 1.113 (still bad) 2008-May-01 02:40:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:40:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-May-01 02:40:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:40:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:40:30 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-May-01 02:40:30 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-May-01 02:40:30 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-May-01 02:40:30 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-May-01 02:40:30 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:40:30 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:40:30 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:40:30 LOG2 antvel: Parameters to Doppler: Topocentric 24030 2008 122 0.0 2008-May-01 02:40:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:40:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-May-01 02:40:30 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-May-01 02:40:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:40:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:40:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:40:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:40:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:40:30 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-May-01 02:40:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:40:30 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.862488 2008.3343229523157 18.999933 2008-May-01 02:40:30 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222241 0.608444444444445 2008-May-01 02:40:30 LOG4 log_alfabeam: ALFABEAM 1 16.779997468396864 0.714029034013916 2008-May-01 02:40:30 LOG4 log_alfabeam: ALFABEAM 2 16.775125114534664 0.648611846649462 2008-May-01 02:40:30 LOG4 log_alfabeam: ALFABEAM 3 16.775827958904010 0.542983002801726 2008-May-01 02:40:30 LOG4 log_alfabeam: ALFABEAM 4 16.781460232419207 0.502864131080573 2008-May-01 02:40:30 LOG4 log_alfabeam: ALFABEAM 5 16.786342633849539 0.568661080078811 2008-May-01 02:40:30 LOG4 log_alfabeam: ALFABEAM 6 16.785582725820611 0.674195476614938 2008-May-01 02:40:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200054 2008-May-01 02:40:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:40:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:40:31 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-May-01 02:40:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:40:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-May-01 02:40:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24032.00 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little and too much power (0.190 < 0.8 & 1.535 > 1.4)! 2008-May-01 02:40:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.321 0.190 1.291 1.276 2008-May-01 02:40:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.499 1.415 1.485 1.251 2008-May-01 02:40:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.442 1.520 1.534 1.317 2008-May-01 02:40:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.535 1.521 1.336 1.357 2008-May-01 02:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.190 and 1.536 (still bad) 2008-May-01 02:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.190 and 1.534 (still bad) 2008-May-01 02:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.536 (still bad) 2008-May-01 02:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.534 (still bad) 2008-May-01 02:40:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:40:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:40:42 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-May-01 02:40:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:40:42 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-May-01 02:40:42 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-May-01 02:40:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-May-01 02:40:42 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-May-01 02:40:42 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:40:42 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:40:42 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:40:42 LOG2 antvel: Parameters to Doppler: Topocentric 24042 2008 122 0.0 2008-May-01 02:40:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:40:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-May-01 02:40:42 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-May-01 02:40:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:40:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:40:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:40:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:40:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:40:42 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-May-01 02:40:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:40:42 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.865830 2008.3343233325729 18.999933 2008-May-01 02:40:42 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222220 0.608444444444444 2008-May-01 02:40:42 LOG4 log_alfabeam: ALFABEAM 1 16.780016556510933 0.714058119984303 2008-May-01 02:40:42 LOG4 log_alfabeam: ALFABEAM 2 16.775132393816332 0.648839287360135 2008-May-01 02:40:42 LOG4 log_alfabeam: ALFABEAM 3 16.775816146779995 0.543182256700578 2008-May-01 02:40:42 LOG4 log_alfabeam: ALFABEAM 4 16.781441143293634 0.502834505265663 2008-May-01 02:40:42 LOG4 log_alfabeam: ALFABEAM 5 16.786335419397940 0.568432618503981 2008-May-01 02:40:42 LOG4 log_alfabeam: ALFABEAM 6 16.785594596837132 0.673997540115582 2008-May-01 02:40:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200055 2008-May-01 02:40:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:40:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:40:43 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2008-May-01 02:40:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:40:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-May-01 02:40:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24044.00 2008-May-01 02:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.188 and 1.535 (still bad) 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.544 (still bad) 2008-May-01 02:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.189 and 1.545 (still bad) 2008-May-01 02:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.542 (still bad) 2008-May-01 02:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.543 (still bad) 2008-May-01 02:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.543 (still bad) 2008-May-01 02:40:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:40:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:40:54 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2008-May-01 02:40:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:40:54 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-May-01 02:40:54 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-May-01 02:40:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-May-01 02:40:54 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-May-01 02:40:54 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:40:54 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:40:54 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:40:54 LOG2 antvel: Parameters to Doppler: Topocentric 24054 2008 122 0.0 2008-May-01 02:40:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:40:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-May-01 02:40:54 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-May-01 02:40:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:40:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:40:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:40:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:40:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:40:54 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-May-01 02:40:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:40:54 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.869173 2008.3343237128299 18.999933 2008-May-01 02:40:54 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222231 0.608444444444442 2008-May-01 02:40:54 LOG4 log_alfabeam: ALFABEAM 1 16.780035648516886 0.714086427791168 2008-May-01 02:40:54 LOG4 log_alfabeam: ALFABEAM 2 16.775139713606148 0.649066414972564 2008-May-01 02:40:54 LOG4 log_alfabeam: ALFABEAM 3 16.775804371613798 0.543381975909076 2008-May-01 02:40:54 LOG4 log_alfabeam: ALFABEAM 4 16.781422050071033 0.502805657767108 2008-May-01 02:40:54 LOG4 log_alfabeam: ALFABEAM 5 16.786328164046591 0.568204464519260 2008-May-01 02:40:54 LOG4 log_alfabeam: ALFABEAM 6 16.785606431392218 0.673799133177842 2008-May-01 02:40:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200056 2008-May-01 02:40:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:40:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:40:55 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-May-01 02:40:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:40:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-May-01 02:40:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:40:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24056.00 2008-May-01 02:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.173 and 1.544 (still bad) 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.173 and 1.542 (still bad) 2008-May-01 02:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.173 and 1.542 (still bad) 2008-May-01 02:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.173 and 1.543 (still bad) 2008-May-01 02:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.173 and 1.541 (still bad) 2008-May-01 02:41:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:41:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:41:06 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-May-01 02:41:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:41:06 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-May-01 02:41:06 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-May-01 02:41:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-May-01 02:41:06 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-May-01 02:41:06 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:41:06 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:41:06 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:41:06 LOG2 antvel: Parameters to Doppler: Topocentric 24066 2008 122 0.0 2008-May-01 02:41:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:41:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-May-01 02:41:06 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-May-01 02:41:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:41:06 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:41:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:41:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:41:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:41:06 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-May-01 02:41:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:41:06 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.872515 2008.3343240930869 18.999933 2008-May-01 02:41:06 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222256 0.608444444444441 2008-May-01 02:41:06 LOG4 log_alfabeam: ALFABEAM 1 16.780054732554269 0.714113940729632 2008-May-01 02:41:06 LOG4 log_alfabeam: ALFABEAM 2 16.775147069312645 0.649293088801338 2008-May-01 02:41:06 LOG4 log_alfabeam: ALFABEAM 3 16.775792640675942 0.543582035865944 2008-May-01 02:41:06 LOG4 log_alfabeam: ALFABEAM 4 16.781402964612930 0.502777605637949 2008-May-01 02:41:06 LOG4 log_alfabeam: ALFABEAM 5 16.786320872345890 0.567976759478332 2008-May-01 02:41:06 LOG4 log_alfabeam: ALFABEAM 6 16.785618222176563 0.673600379521564 2008-May-01 02:41:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200057 2008-May-01 02:41:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:41:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:41:07 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-May-01 02:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.174 and 1.541 (still bad) 2008-May-01 02:41:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:41:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-May-01 02:41:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24068.00 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.174 and 1.542 (still bad) 2008-May-01 02:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.167 and 1.536 (still bad) 2008-May-01 02:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.168 and 1.534 (still bad) 2008-May-01 02:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.169 and 1.533 (still bad) 2008-May-01 02:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.170 and 1.534 (still bad) 2008-May-01 02:41:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:41:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:41:18 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-May-01 02:41:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:41:18 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-May-01 02:41:18 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-May-01 02:41:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-May-01 02:41:18 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-May-01 02:41:18 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:41:18 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:41:18 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:41:18 LOG2 antvel: Parameters to Doppler: Topocentric 24078 2008 122 0.0 2008-May-01 02:41:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:41:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-May-01 02:41:18 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-May-01 02:41:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:41:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:41:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:41:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:41:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:41:18 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2008-May-01 02:41:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:41:18 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.875858 2008.3343244733439 18.999933 2008-May-01 02:41:18 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222249 0.608444444444442 2008-May-01 02:41:18 LOG4 log_alfabeam: ALFABEAM 1 16.780073819605743 0.714140675549771 2008-May-01 02:41:18 LOG4 log_alfabeam: ALFABEAM 2 16.775154465122810 0.649519439725267 2008-May-01 02:41:18 LOG4 log_alfabeam: ALFABEAM 3 16.775780947168869 0.543782551195469 2008-May-01 02:41:18 LOG4 log_alfabeam: ALFABEAM 4 16.781383875935994 0.502750331830594 2008-May-01 02:41:18 LOG4 log_alfabeam: ALFABEAM 5 16.786313540144523 0.567749371939765 2008-May-01 02:41:18 LOG4 log_alfabeam: ALFABEAM 6 16.785629976020083 0.673401165248316 2008-May-01 02:41:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200058 2008-May-01 02:41:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:41:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:41:19 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-May-01 02:41:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:41:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-May-01 02:41:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.534 (still bad) 2008-May-01 02:41:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24080.00 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.534 (still bad) 2008-May-01 02:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.522 (still bad) 2008-May-01 02:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.522 (still bad) 2008-May-01 02:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.522 (still bad) 2008-May-01 02:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.522 (still bad) 2008-May-01 02:41:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:41:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:41:30 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-May-01 02:41:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:41:30 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2008-May-01 02:41:30 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-May-01 02:41:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-May-01 02:41:30 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-May-01 02:41:30 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:41:30 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33432 J 2008-May-01 02:41:30 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:41:30 LOG2 antvel: Parameters to Doppler: Topocentric 24090 2008 122 0.0 2008-May-01 02:41:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:41:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-May-01 02:41:30 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-May-01 02:41:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:41:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:41:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:41:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:41:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:41:30 LOG5 begin_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2008-May-01 02:41:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:41:30 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.879200 2008.3343248536009 18.999933 2008-May-01 02:41:30 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222234 0.608444444444444 2008-May-01 02:41:30 LOG4 log_alfabeam: ALFABEAM 1 16.780092897815134 0.714166616596216 2008-May-01 02:41:30 LOG4 log_alfabeam: ALFABEAM 2 16.775161896394845 0.649745327588272 2008-May-01 02:41:30 LOG4 log_alfabeam: ALFABEAM 3 16.775769298308095 0.543983396816370 2008-May-01 02:41:30 LOG4 log_alfabeam: ALFABEAM 4 16.781364795897755 0.502723852348050 2008-May-01 02:41:30 LOG4 log_alfabeam: ALFABEAM 5 16.786306172043691 0.567522442734823 2008-May-01 02:41:30 LOG4 log_alfabeam: ALFABEAM 6 16.785641685667823 0.673201614605839 2008-May-01 02:41:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200059 2008-May-01 02:41:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:41:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:41:31 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-May-01 02:41:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:41:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-May-01 02:41:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24092.00 2008-May-01 02:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.522 (still bad) 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little and too much power (0.171 < 0.8 & 1.520 > 1.4)! 2008-May-01 02:41:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.278 0.171 1.232 1.249 2008-May-01 02:41:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.473 1.372 1.414 1.225 2008-May-01 02:41:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.390 1.489 1.434 1.270 2008-May-01 02:41:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.520 1.515 1.323 1.350 2008-May-01 02:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.519 (still bad) 2008-May-01 02:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.518 (still bad) 2008-May-01 02:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.173 and 1.518 (still bad) 2008-May-01 02:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.517 (still bad) 2008-May-01 02:41:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:41:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:41:42 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2008-May-01 02:41:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:41:42 LOG5 end_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2008-May-01 02:41:42 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-May-01 02:41:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-May-01 02:41:42 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-May-01 02:41:42 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:41:42 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33433 J 2008-May-01 02:41:42 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:41:42 LOG2 antvel: Parameters to Doppler: Topocentric 24102 2008 122 0.0 2008-May-01 02:41:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:41:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-May-01 02:41:42 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-May-01 02:41:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:41:42 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:41:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:41:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-May-01 02:41:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-May-01 02:41:42 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-May-01 02:41:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-May-01 02:41:42 LOG5 log_alfabeam: Parameters: 16.780722222222224 0.60844444444444445 16.882543 2008.3343252338582 18.999933 2008-May-01 02:41:42 LOG4 log_alfabeam: ALFABEAM 0 16.780722222222256 0.608444444444440 2008-May-01 02:41:42 LOG4 log_alfabeam: ALFABEAM 1 16.780111978163095 0.714191779786600 2008-May-01 02:41:42 LOG4 log_alfabeam: ALFABEAM 2 16.775169367356344 0.649970882864506 2008-May-01 02:41:42 LOG4 log_alfabeam: ALFABEAM 3 16.775757687338995 0.544184687780740 2008-May-01 02:41:42 LOG4 log_alfabeam: ALFABEAM 4 16.781345713516743 0.502698150975456 2008-May-01 02:41:42 LOG4 log_alfabeam: ALFABEAM 5 16.786298763851157 0.567295840821423 2008-May-01 02:41:42 LOG4 log_alfabeam: ALFABEAM 6 16.785653357907293 0.673001613262365 2008-May-01 02:41:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 812200060 2008-May-01 02:41:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-May-01 02:41:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-May-01 02:41:43 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-May-01 02:41:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-May-01 02:41:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-May-01 02:41:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24104.00 2008-May-01 02:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.517 (still bad) 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1660.000000 MHz 2008-May-01 02:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.518 (still bad) 2008-May-01 02:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.516 (still bad) 2008-May-01 02:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.516 (still bad) 2008-May-01 02:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.172 and 1.517 (still bad) 2008-May-01 02:41:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-May-01 02:41:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-May-01 02:41:54 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-May-01 02:41:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-May-01 02:41:54 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-May-01 02:41:54 INFO2 smartfreq: Switching off CAL 2008-May-01 02:41:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-May-01 02:41:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-May-01 02:41:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-May-01 02:41:54 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-May-01 02:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.171 and 1.517 (still bad) 2008-May-01 02:41:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-May-01 02:41:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-May-01 02:41:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-May-01 02:41:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-May-01 02:41:54 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-May-01 02:41:54 INFO3 restore_frequencies: Restoring original frequencies 2008-May-01 02:41:54 LOG5 antvel: Calling 'antvel 164650.600000 3630.400000 J 0' 2008-May-01 02:41:54 LOG2 antvel: Precessing RA = 16:46:50.6 Dec = +00:36:30.4 Epoch = 2008.33433 J 2008-May-01 02:41:54 LOG2 antvel: Computed apparent RA = 16:47:17.8 Dec = +00:35:23.7 2008-May-01 02:41:54 LOG2 antvel: Parameters to Doppler: Topocentric 24114 2008 122 0.0 2008-May-01 02:41:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-May-01 02:41:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-May-01 02:41:54 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-May-01 02:41:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-May-01 02:41:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-May-01 02:41:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-May-01 02:41:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:54 STOP finish_task: Finishing task 'smart frequency switching' 2008-May-01 02:41:54 LOG5 finish_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2008-May-01 02:41:54 DONE finish_task: DONE finished pattern: smart frequency switching 2008-May-01 02:41:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-01 02:41:54 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-May-01 02:41:54 LOG5 end_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2008-May-01 02:41:54 NOTE run_command_file: DONE with command file processing 2008-May-01 02:41:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-May-01 02:41:54 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-May-01 02:41:54 LOG5 finish_task: Level: (1) ID = <10266> Status = 0 0 0 0 ok 2008-May-01 02:41:54 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-May-01 02:41:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-May-01 02:41:55 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-May-01 02:41:55 LOG5 end_task: Level: (1) ID = <10266> Status = 0 0 0 0 ok 2008-May-01 02:41:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-May-01 02:41:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-May-01 02:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:43:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:43:29.322 (seconds: 9809.322)!} 2008-May-01 02:43:29 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:43:29.322 (seconds: 9809.322)! 2008-May-01 02:43:39 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-May-01 02:43:39 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-May-01 02:43:39 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-May-01 02:43:39 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-May-01 02:43:39 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-May-01 02:43:39 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-May-01 02:43:39 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-May-01 02:43:39 NOTE CIMA-exit_cima: Cleaning up session ... 2008-May-01 02:43:39 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-May-01 02:43:39 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-May-01 02:43:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:43:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-May-01 02:43:41 LOG3 exec_msg: Closing socket