2008-Apr-26 23:46:04 BEGIN executive: CIMA executive starting ... 2008-Apr-26 23:46:05 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-26 23:46:05 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-26 12:28 2008-Apr-26 23:46:05 INFO4 executive: This is an ON-LINE session 2008-Apr-26 23:46:05 INFO4 executive: This is a REMOTE session 2008-Apr-26 23:46:05 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-26 23:46:05 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Apr-26 23:46:05 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog' 2008-Apr-26 23:46:05 LOG2 log_preferences: Currently applied preferences: 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(dailylog) = general 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(displayformat) = long 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-26 23:46:05 LOG2 log_preferences: prefs(fontsize) = 3 2008-Apr-26 23:46:05 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-26 23:46:05 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Apr-26 23:46:05 ALERT executive: CIMA executive ready 2008-Apr-26 23:46:08 NOTE frontend: CIMA frontend ready 2008-Apr-26 23:46:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:09 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-26 23:46:10 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-26 23:46:10 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-26 23:46:10 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-26 23:46:10 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-26 23:46:10 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-26 23:46:10 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-26 23:46:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-26 23:46:10 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-26 23:46:10 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-26 23:46:10 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-26 23:46:10 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-26 23:46:10 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-26 23:46:10 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-26 23:46:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:46:10 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-26 23:46:10 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2008-Apr-26 23:46:15 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-26 23:46:15 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-26 23:46:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:27 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-26 23:46:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 23:46:30 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-26 23:46:30 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-26 23:46:30 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-26 23:46:30 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-26 23:46:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-26 23:46:30 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-26 23:46:30 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-26 23:46:30 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-26 23:46:30 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-26 23:46:30 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-26 23:46:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-26 23:46:30 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-26 23:46:30 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-26 23:46:30 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-26 23:46:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:46:30 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-26 23:46:30 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-26 23:46:30 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-26 23:46:30 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-26 23:46:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-26 23:46:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:46:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:46:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:46:30 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:46:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:46:30 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-26 23:46:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:46:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-26 23:46:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-26 23:46:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-26 23:46:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-26 23:46:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-26 23:46:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-26 23:46:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-26 23:46:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-26 23:46:30 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-26 23:46:31 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-26 23:46:31 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-26 23:46:31 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-26 23:46:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-26 23:46:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:46:31 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-26 23:46:31 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-26 23:46:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:46:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:46:46 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-26 23:46:46 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-26 23:46:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-26 23:46:46 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-26 23:46:46 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-26 23:46:46 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-26 23:46:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:46:46 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-26 23:46:46 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-26 23:46:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-26 23:46:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-26 23:46:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-26 23:46:47 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-26 23:46:47 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-26 23:46:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-26 23:46:47 LOG5 begin_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-26 23:46:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-26 23:46:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-26 23:46:47 START begin_task: Starting task 'selecting calibration port' 2008-Apr-26 23:46:47 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-26 23:46:47 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-26 23:46:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-26 23:46:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:46:47 START begin_task: Starting task 'waiting on calport' 2008-Apr-26 23:46:47 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-26 23:46:47 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Apr-26 23:46:47 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-26 23:46:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:46:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:46:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-26 23:46:47 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-26 23:46:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-26 23:46:47 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-26 23:46:47 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-26 23:46:47 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-26 23:46:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:46:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-26 23:46:47 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-26 23:46:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-26 23:46:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 23:46:48 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-26 23:46:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 23:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:46:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 23:46:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 23:46:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 23:46:48 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-26 23:46:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-26 23:46:48 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-26 23:46:48 LOG5 finish_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-26 23:46:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-26 23:46:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:46:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-26 23:46:48 LOG5 end_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-26 23:46:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-26 23:46:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-26 23:46:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-26 23:46:48 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Apr-26 23:46:48 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Apr-26 23:46:48 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-26 23:46:48 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-26 23:46:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-26 23:46:48 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-26 23:46:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-26 23:46:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-26 23:46:48 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-26 23:46:48 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-26 23:46:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:46:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-26 23:46:48 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-26 23:46:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-26 23:46:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2010.0017.fits 2008-Apr-26 23:46:48 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080426.a2010.0017.fits} 2008-Apr-26 23:46:49 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Apr-26 23:47:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 23:47:11 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-26 23:47:12 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-26 23:47:12 LOG4 exec_msg: From OBSERVER: track_new_source drift7p1 134300.0 +013454 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-26 23:47:12 LOG1 track_new_source: Calling 'track_new_source drift7p1 134300.0 +013454 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-26 23:47:12 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-26 23:47:12 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift7p1} INFO {Selecting source 'drift7p1' ...} 2008-Apr-26 23:47:12 LOG3 track_source: Calling 'track_source drift7p1 134300.0 +013454 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-26 23:47:12 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 23:47:12 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift7p1} INFO {Slewing to source 'drift7p1' ...} 2008-Apr-26 23:47:12 INFO1 track_source: Starting to track drift7p1 2008-Apr-26 23:47:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift7p1" 2008-Apr-26 23:47:12 LOG3 vw_send: To DATATAKING: set ra 134300.0 2008-Apr-26 23:47:12 LOG3 vw_send: To DATATAKING: set dec +013454 2008-Apr-26 23:47:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 23:47:12 LOG3 vw_send: To DATATAKING: pnt tr 134300.0 +013454 -CJ 2008-Apr-26 23:47:12 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-26 23:47:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 23:47:12 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 23:47:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:47:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 23:47:12 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-26 23:47:12 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-26 23:47:12 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-26 23:47:12 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-26 23:47:12 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-26 23:47:12 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-26 23:47:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:47:12 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-26 23:47:12 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-26 23:47:12 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 DONE finish_task: DONE finished selecting: new source 2008-Apr-26 23:47:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:47:12 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-26 23:47:12 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift7p1" 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: set ra 134300.0 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: set dec +013454 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: vw% 134300.0 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: vw% +013454 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: pnt tr 134300.0 +013454 -CJ 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-26 23:47:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:47:24 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-26 23:47:24 LOG4 exec_msg: From OBSERVER: track_new_source drift7p1 134300.0 +013454 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-26 23:47:24 LOG1 track_new_source: Calling 'track_new_source drift7p1 134300.0 +013454 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-26 23:47:24 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-26 23:47:24 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift7p1} INFO {Selecting source 'drift7p1' ...} 2008-Apr-26 23:47:24 LOG3 track_source: Calling 'track_source drift7p1 134300.0 +013454 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-26 23:47:24 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 23:47:24 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift7p1} INFO {Slewing to source 'drift7p1' ...} 2008-Apr-26 23:47:24 INFO1 track_source: Starting to track drift7p1 2008-Apr-26 23:47:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift7p1" 2008-Apr-26 23:47:24 LOG3 vw_send: To DATATAKING: set ra 134300.0 2008-Apr-26 23:47:24 LOG3 vw_send: To DATATAKING: set dec +013454 2008-Apr-26 23:47:24 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 23:47:24 LOG3 vw_send: To DATATAKING: pnt tr 134300.0 +013454 -CJ 2008-Apr-26 23:47:24 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-26 23:47:24 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 23:47:24 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 23:47:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:47:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 23:47:24 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-26 23:47:24 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-26 23:47:24 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-26 23:47:24 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-26 23:47:24 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-26 23:47:24 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-26 23:47:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:47:24 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-26 23:47:24 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-26 23:47:24 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 DONE finish_task: DONE finished selecting: new source 2008-Apr-26 23:47:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:47:24 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-26 23:47:24 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift7p1" 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: set ra 134300.0 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: set dec +013454 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: vw% 134300.0 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: vw% +013454 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: pnt tr 134300.0 +013454 -CJ 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-26 23:47:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:47:35 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-26 23:47:35 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-26 23:47:35 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-26 23:47:35 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-26 23:47:35 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-26 23:47:35 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-26 23:47:35 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-26 23:47:36 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-26 23:47:36 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-26 23:47:36 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-26 23:47:36 LOG3 exec_msg: Closing socket 2008-Apr-26 23:47:36 LOG3 exec_msg: Closing socket 2008-Apr-26 23:47:36 LOG3 exec_msg: Closing socket 2008-Apr-26 23:47:36 LOG3 exec_msg: Closing socket 2008-Apr-26 23:47:38 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-26 23:47:38 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-26 23:47:39 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-26 23:47:39 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-26 23:47:46 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-26 23:47:46 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-26 23:47:46 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-26 23:47:46 LOG5 begin_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-26 23:47:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-26 23:47:46 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-26 23:47:46 START begin_task: Starting task 'selecting calibration port' 2008-Apr-26 23:47:46 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-26 23:47:46 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-26 23:47:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-26 23:47:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:47:46 START begin_task: Starting task 'waiting on calport' 2008-Apr-26 23:47:46 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-26 23:47:46 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-26 23:47:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:47:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:47:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:47:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-26 23:47:47 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-26 23:47:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-26 23:47:47 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-26 23:47:47 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-26 23:47:47 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-26 23:47:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:47:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-26 23:47:47 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-26 23:47:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-26 23:47:47 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-26 23:47:47 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-26 23:47:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 23:47:47 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-26 23:47:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:47:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 23:47:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 23:47:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 23:47:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 23:47:47 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-26 23:47:47 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-26 23:47:47 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-26 23:47:47 LOG5 finish_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-26 23:47:47 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-26 23:47:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:47:47 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-26 23:47:47 LOG5 end_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-26 23:47:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-26 23:47:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-26 23:47:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-26 23:47:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-26 23:48:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-26 23:48:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-26 23:48:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-26 23:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-26 23:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-26 23:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-26 23:48:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-26 23:48:04 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-26 23:48:04 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-26 23:48:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-26 23:48:04 LOG5 begin_task: Level: (1) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-26 23:48:04 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-26 23:48:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-26 23:48:04 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-26 23:48:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:48:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:48:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:48:04 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-26 23:48:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:48:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:48:04 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-26 23:48:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:48:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:48:04 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-26 23:48:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-26 23:48:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-26 23:48:04 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-26 23:48:04 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-26 23:48:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-26 23:48:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:04 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-26 23:48:04 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-26 23:48:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-26 23:48:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:48:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:48:04 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-26 23:48:04 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-26 23:48:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-26 23:48:04 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-26 23:48:04 LOG5 finish_task: Level: (1) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-26 23:48:04 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-26 23:48:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:48:04 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-26 23:48:04 LOG5 end_task: Level: (1) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-26 23:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:20 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Apr-26 23:48:20 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Apr-26 23:48:20 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 23:48:20 LOG5 begin_task: Level: (1) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-26 23:48:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 23:48:20 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 23:48:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 23:48:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 23:48:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:20 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 23:48:20 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-26 23:48:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 23:48:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:48:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 23:48:24 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-26 23:48:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 23:48:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 23:48:24 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-26 23:48:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 23:48:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 23:48:24 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-26 23:48:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 23:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 7 dB 2008-Apr-26 23:48:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 23:48:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 23:48:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 23:48:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 23:48:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 23:48:24 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-26 23:48:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.905 0.823 ALFA beam 1: 0.888 0.901 2008-Apr-26 23:48:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.041 0.972 ALFA beam 3: 0.995 1.076 2008-Apr-26 23:48:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.961 1.013 ALFA beam 5: 1.019 0.920 2008-Apr-26 23:48:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.023 1.035 ALFA beam 7: 0.899 0.927 2008-Apr-26 23:48:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 23:48:24 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-26 23:48:24 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 23:48:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:48:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 23:48:24 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-26 23:48:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Apr-26 23:48:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 23:48:24 LOG5 finish_task: Level: (1) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-26 23:48:24 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 23:48:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-26 23:48:24 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 23:48:24 LOG5 end_task: Level: (1) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-26 23:48:29 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Apr-26 23:48:29 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift7p1 133900.0 +013454 J 0 Topocentric velocity(optical) 2008-Apr-26 23:48:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift7p1 133900.0 +013454 J 0 Topocentric velocity(optical)' 2008-Apr-26 23:48:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-26 23:48:29 LOG5 begin_task: Level: (1) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-26 23:48:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift7p1' 2008-Apr-26 23:48:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-26 23:48:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift7p1} 2008-Apr-26 23:48:29 INFO5 fixed_driftmap: Start: year = 2008.3230444647249 RA = 13:39:27.3 Dec = +01:32:09.9 2008-Apr-26 23:48:29 NOTE fixed_driftmap: Setting ZA to 16:49:03.8 ... 2008-Apr-26 23:48:29 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 16.82 2008-Apr-26 23:48:29 LOG3 track_source: Calling 'track_source drift7p1 360.0 16.8177206745 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-26 23:48:29 START begin_task: Starting task 'sending tracking commands' 2008-Apr-26 23:48:29 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-26 23:48:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift7p1} INFO {Slewing to source 'drift7p1' ...} 2008-Apr-26 23:48:29 INFO1 track_source: Starting to track drift7p1 2008-Apr-26 23:48:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift7p1" 2008-Apr-26 23:48:29 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Apr-26 23:48:29 LOG3 vw_send: To DATATAKING: set dec 16.8177206745 2008-Apr-26 23:48:29 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-26 23:48:29 LOG3 vw_send: To DATATAKING: pnt tr 360.0 16.8177206745 -CF 2008-Apr-26 23:48:29 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-26 23:48:29 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-26 23:48:29 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-26 23:48:29 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-26 23:48:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:48:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-26 23:48:29 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-26 23:48:29 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-26 23:48:29 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-26 23:48:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-26 23:48:29 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-26 23:48:29 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Apr-26 23:48:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-26 23:48:29 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-26 23:48:29 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift7p1" 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: set dec 16.8177206745 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: vw% 16.8177206745 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 16.8177206745 -CF 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-26 23:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:30 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-26 23:48:30 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-26 23:48:30 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-26 23:48:30 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-26 23:48:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 23:48:30 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-26 23:48:30 LOG5 finish_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-26 23:48:30 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-26 23:48:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:48:30 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-26 23:48:30 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-26 23:48:30 START begin_task: Starting task 'waiting on telescope' 2008-Apr-26 23:48:30 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-26 23:48:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-26 23:48:30 LOG3 waittrk: Start waittrk 5 2008-Apr-26 23:48:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-26 23:48:30 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-26 23:48:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-26 23:48:35 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-26 23:48:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-26 23:48:35 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-26 23:48:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-26 23:48:40 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-26 23:48:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-26 23:48:40 INFO2 waittrk: Now tracking drift7p1 2008-Apr-26 23:48:40 LOG4 waittrk: Current telescope position: Az = 359.66 ZA = 16.80 2008-Apr-26 23:48:40 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-26 23:48:40 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-26 23:48:40 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-26 23:48:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:48:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-26 23:48:41 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 23:48:41 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 23:48:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 23:48:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:41 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 23:48:41 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:48:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 23:48:41 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 23:48:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:48:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 23:48:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:48:41 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:48:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:48:41 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:48:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 23:48:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:48:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:48:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:48:41 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:48:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:48:41 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:48:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:48:41 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 23:48:41 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-26 23:48:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:48:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 23:48:41 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-26 23:48:41 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-26 23:48:41 LOG5 antvel: Calling 'antvel 360.000000 16.817721 F 0' 2008-Apr-26 23:48:41 LOG2 antvel: Parameters to Doppler: Topocentric 100121 2008 117 0.0 2008-Apr-26 23:48:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-26 23:48:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Apr-26 23:48:41 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Apr-26 23:48:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-26 23:48:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-26 23:48:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-26 23:48:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:48:41 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 23:48:41 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-26 23:48:41 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-26 23:48:41 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-26 23:48:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-26 23:48:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:41 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-26 23:48:41 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:48:42 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-26 23:48:42 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-26 23:48:42 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-26 23:48:42 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-26 23:48:42 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:42 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:42 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:42 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-26 23:48:42 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-26 23:48:42 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-26 23:48:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:48:42 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 7 dB 2008-Apr-26 23:48:42 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-26 23:48:42 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-26 23:48:42 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-26 23:48:42 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-26 23:48:42 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-26 23:48:42 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.921 0.841 ALFA beam 1: 0.892 0.902 2008-Apr-26 23:48:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.038 0.975 ALFA beam 3: 0.997 1.101 2008-Apr-26 23:48:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.977 1.033 ALFA beam 5: 1.017 0.918 2008-Apr-26 23:48:42 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.045 1.061 ALFA beam 7: 0.911 0.951 2008-Apr-26 23:48:42 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 23:48:42 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-26 23:48:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:48:42 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 23:48:42 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 23:48:42 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-26 23:48:42 LOG5 finish_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-26 23:48:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:48:42 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-26 23:48:42 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-26 23:48:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-26 23:48:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-26 23:48:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-26 23:48:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-26 23:48:43 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080426.a2010.0017.fits' is empty! 2008-Apr-26 23:48:43 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 13:39:27.3 LST = 13:43:42.5 diff = -255.2 secs 2008-Apr-26 23:48:43 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-26 23:48:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Apr-26 23:48:43 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-26 23:48:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-26 23:48:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 23:48:43 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 23:48:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 23:48:43 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-26 23:48:43 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-26 23:48:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 23:48:43 INFO2 take_spectra: Starting WAPP scan: 811700490 2008-Apr-26 23:48:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-26 23:48:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 23:48:43 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-26 23:48:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-26 23:48:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 23:48:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13724.00 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 23:58:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 23:58:44 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-26 23:58:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 23:58:44 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-26 23:58:44 LOG1 fixed_driftmap: New position: year = 2008.323063984587 RA = 13:53:19.4 RA/Dec = 13:53:46.7 +01:32:14.2 2008-Apr-26 23:58:44 NOTE fixed_driftmap: Correcting ZA to 16:48:59.5 ... 2008-Apr-26 23:58:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8165225486 -CF 2008-Apr-26 23:58:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-26 23:58:44 START begin_task: Starting task 'WAPP calibration' 2008-Apr-26 23:58:44 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-26 23:58:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-26 23:58:44 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-26 23:58:44 START begin_task: Starting task 'selecting calibration type' 2008-Apr-26 23:58:44 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-26 23:58:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-26 23:58:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-26 23:58:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:58:44 START begin_task: Starting task 'waiting on setcal' 2008-Apr-26 23:58:44 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-26 23:58:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8165225486 -CF 2008-Apr-26 23:58:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:58:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-26 23:58:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-26 23:58:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:58:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-26 23:58:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-26 23:58:44 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-26 23:58:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:58:45 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-26 23:58:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:58:45 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-26 23:58:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:58:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:58:45 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:58:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-26 23:58:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-26 23:58:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:58:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-26 23:58:45 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-26 23:58:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-26 23:58:45 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-26 23:58:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-26 23:58:45 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-26 23:58:45 LOG5 finish_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-26 23:58:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:58:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-26 23:58:45 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-26 23:58:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-26 23:58:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-26 23:58:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 23:58:45 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 23:58:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-26 23:58:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 23:58:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 23:58:45 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-26 23:58:45 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-26 23:58:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 23:58:45 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-26 23:58:45 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-26 23:58:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 23:58:45 INFO2 take_spectra: Starting WAPP scan: 811700491 2008-Apr-26 23:58:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-26 23:58:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 23:58:46 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-26 23:58:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 23:58:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14327.00 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.487 > 1.4)! 2008-Apr-26 23:58:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.860 0.891 0.902 2008-Apr-26 23:58:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.410 1.337 1.366 1.487 2008-Apr-26 23:58:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 1.038 1.018 0.920 2008-Apr-26 23:58:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.064 0.910 0.951 2008-Apr-26 23:58:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-26 23:58:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-26 23:58:48 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-26 23:58:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-26 23:58:48 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-26 23:58:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-26 23:58:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-26 23:58:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-26 23:58:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-26 23:58:48 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-26 23:58:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-26 23:58:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-26 23:58:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-26 23:58:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-26 23:58:48 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-26 23:58:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-26 23:58:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-26 23:58:48 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-26 23:58:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-26 23:58:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-26 23:58:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-26 23:58:48 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-26 23:58:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Apr-26 23:58:48 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-26 23:58:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-26 23:58:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-26 23:58:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-26 23:58:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-26 23:58:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-26 23:58:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-26 23:58:49 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-26 23:58:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-26 23:58:49 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-26 23:58:49 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-26 23:58:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-26 23:58:49 INFO2 take_spectra: Starting WAPP scan: 811700492 2008-Apr-26 23:58:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-26 23:58:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-26 23:58:49 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-26 23:58:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-26 23:58:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-26 23:58:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14330.00 2008-Apr-26 23:58:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20080426.a2010.0018.fits 2008-Apr-26 23:58:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080426.a2010.0018.fits} 2008-Apr-26 23:58:50 INFO5 check_wapp_levels: WAPP power levels are between 1.062 and 1.487 (still bad) 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-26 23:58:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.859 and 1.106 2008-Apr-27 00:08:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:08:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:08:50 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-27 00:08:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:08:50 LOG5 end_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-27 00:08:50 LOG1 fixed_driftmap: New position: year = 2008.3230831875683 RA = 14:03:27.1 RA/Dec = 14:03:54.4 +01:32:17.6 2008-Apr-27 00:08:50 NOTE fixed_driftmap: Correcting ZA to 16:48:56.1 ... 2008-Apr-27 00:08:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8155747163 -CF 2008-Apr-27 00:08:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 00:08:50 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 00:08:50 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 00:08:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 00:08:50 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 00:08:50 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 00:08:50 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-27 00:08:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 00:08:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 00:08:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:08:50 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 00:08:50 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-27 00:08:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8155747163 -CF 2008-Apr-27 00:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:08:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 00:08:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:08:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 00:08:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 00:08:50 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-27 00:08:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 00:08:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:08:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 00:08:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:08:51 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:08:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:08:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:08:51 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:08:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 00:08:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:08:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:08:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:08:51 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:08:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:08:51 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:08:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:08:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 00:08:51 LOG5 finish_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 00:08:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:08:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 00:08:51 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 00:08:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 00:08:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 00:08:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:08:51 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:08:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 00:08:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:08:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:08:51 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 00:08:51 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 00:08:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:08:51 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-27 00:08:51 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 00:08:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:08:51 INFO2 take_spectra: Starting WAPP scan: 811800001 2008-Apr-27 00:08:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 00:08:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:08:52 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-27 00:08:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:08:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14933.00 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:08:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:08:54 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-27 00:08:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:08:54 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-27 00:08:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 00:08:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 00:08:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 00:08:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:08:54 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-27 00:08:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:08:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.486 > 1.4)! 2008-Apr-27 00:08:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.241 1.081 1.189 1.203 2008-Apr-27 00:08:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.406 1.330 1.369 1.486 2008-Apr-27 00:08:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.330 1.410 1.401 1.221 2008-Apr-27 00:08:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.450 1.470 1.266 1.313 2008-Apr-27 00:08:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 00:08:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:08:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:08:54 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-27 00:08:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 00:08:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 00:08:54 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 00:08:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 00:08:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:08:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 00:08:54 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-27 00:08:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Apr-27 00:08:55 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Apr-27 00:08:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 00:08:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 00:08:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 00:08:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 00:08:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 00:08:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 00:08:55 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 00:08:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:08:55 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-27 00:08:55 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 00:08:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:08:55 INFO2 take_spectra: Starting WAPP scan: 811800002 2008-Apr-27 00:08:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 00:08:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:08:55 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-27 00:08:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 00:08:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:08:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0000.fits 2008-Apr-27 00:08:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14936.00 2008-Apr-27 00:08:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0000.fits} 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:08:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.872 and 1.105 2008-Apr-27 00:18:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:18:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:18:56 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-27 00:18:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:18:56 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-27 00:18:56 LOG1 fixed_driftmap: New position: year = 2008.3231023905494 RA = 14:13:34.8 RA/Dec = 14:14:02.0 +01:32:21.3 2008-Apr-27 00:18:56 NOTE fixed_driftmap: Correcting ZA to 16:48:52.4 ... 2008-Apr-27 00:18:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8145455513 -CF 2008-Apr-27 00:18:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 00:18:56 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 00:18:56 LOG5 begin_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 00:18:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 00:18:56 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 00:18:56 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 00:18:56 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-27 00:18:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 00:18:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 00:18:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:18:56 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 00:18:56 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-27 00:18:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8145455513 -CF 2008-Apr-27 00:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:18:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 00:18:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:18:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 00:18:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 00:18:56 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-27 00:18:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 00:18:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:18:57 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 00:18:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:18:57 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:18:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:18:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:18:57 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:18:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 00:18:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:18:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:18:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:18:57 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:18:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:18:57 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:18:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:18:57 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 00:18:57 LOG5 finish_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 00:18:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:18:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 00:18:57 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 00:18:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 00:18:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 00:18:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:18:57 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:18:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 00:18:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:18:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:18:57 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 00:18:57 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 00:18:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:18:57 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 00:18:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:18:57 INFO2 take_spectra: Starting WAPP scan: 811800003 2008-Apr-27 00:18:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 00:18:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:18:57 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-27 00:18:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:18:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15538.00 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:18:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:18:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:18:59 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-27 00:18:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:18:59 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-27 00:18:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 00:18:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 00:18:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 00:18:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:18:59 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-27 00:18:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:18:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 00:18:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:18:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:18:59 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-27 00:18:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 00:18:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 00:18:59 LOG5 finish_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 00:18:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 00:18:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:18:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 00:18:59 LOG5 end_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-27 00:18:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Apr-27 00:18:59 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Apr-27 00:18:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 00:19:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 00:19:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 00:19:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 00:19:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 00:19:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 00:19:00 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 00:19:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:19:00 LOG5 begin_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-27 00:19:00 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 00:19:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:19:00 INFO2 take_spectra: Starting WAPP scan: 811800004 2008-Apr-27 00:19:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 00:19:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:19:00 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-27 00:19:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 00:19:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.485 > 1.4)! 2008-Apr-27 00:19:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.246 1.088 1.187 1.201 2008-Apr-27 00:19:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.412 1.331 1.367 1.485 2008-Apr-27 00:19:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.333 1.410 1.399 1.221 2008-Apr-27 00:19:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.454 1.472 1.271 1.316 2008-Apr-27 00:19:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:19:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15541.00 2008-Apr-27 00:19:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0001.fits 2008-Apr-27 00:19:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0001.fits} 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:19:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 1.472 (still bad) 2008-Apr-27 00:19:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.103 2008-Apr-27 00:26:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.424 > 1.4)! 2008-Apr-27 00:26:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.424 0.921 0.933 2008-Apr-27 00:26:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.984 1.002 1.105 2008-Apr-27 00:26:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 1.036 1.023 0.922 2008-Apr-27 00:26:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 1.070 0.915 0.957 2008-Apr-27 00:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.401 (still bad) 2008-Apr-27 00:26:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.379 2008-Apr-27 00:26:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.422 > 1.4)! 2008-Apr-27 00:26:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.422 0.918 0.935 2008-Apr-27 00:26:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.982 1.005 1.106 2008-Apr-27 00:26:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.035 1.022 0.922 2008-Apr-27 00:26:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 1.069 0.916 0.955 2008-Apr-27 00:26:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.916 and 1.369 2008-Apr-27 00:26:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.517 > 1.4)! 2008-Apr-27 00:26:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.517 0.916 0.932 2008-Apr-27 00:26:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.984 1.004 1.106 2008-Apr-27 00:26:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.036 1.021 0.922 2008-Apr-27 00:26:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 1.069 0.916 0.956 2008-Apr-27 00:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.520 (still bad) 2008-Apr-27 00:26:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.381 2008-Apr-27 00:26:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.432 > 1.4)! 2008-Apr-27 00:26:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 1.432 0.914 0.933 2008-Apr-27 00:26:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.983 1.006 1.107 2008-Apr-27 00:26:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.035 1.022 0.920 2008-Apr-27 00:26:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 1.070 0.916 0.956 2008-Apr-27 00:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.440 (still bad) 2008-Apr-27 00:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.486 (still bad) 2008-Apr-27 00:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.516 (still bad) 2008-Apr-27 00:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.535 (still bad) 2008-Apr-27 00:26:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.393 2008-Apr-27 00:26:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.408 > 1.4)! 2008-Apr-27 00:26:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.408 0.910 0.932 2008-Apr-27 00:26:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.981 1.005 1.106 2008-Apr-27 00:26:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 1.038 1.023 0.922 2008-Apr-27 00:26:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 1.071 0.916 0.956 2008-Apr-27 00:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.418 (still bad) 2008-Apr-27 00:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.424 (still bad) 2008-Apr-27 00:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.425 (still bad) 2008-Apr-27 00:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.430 (still bad) 2008-Apr-27 00:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.433 (still bad) 2008-Apr-27 00:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.432 (still bad) 2008-Apr-27 00:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.434 (still bad) 2008-Apr-27 00:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.432 (still bad) 2008-Apr-27 00:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.435 (still bad) 2008-Apr-27 00:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.430 (still bad) 2008-Apr-27 00:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.431 (still bad) 2008-Apr-27 00:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.430 (still bad) 2008-Apr-27 00:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.431 (still bad) 2008-Apr-27 00:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.427 (still bad) 2008-Apr-27 00:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.429 (still bad) 2008-Apr-27 00:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.428 (still bad) 2008-Apr-27 00:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.427 (still bad) 2008-Apr-27 00:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.428 (still bad) 2008-Apr-27 00:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.426 (still bad) 2008-Apr-27 00:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.425 (still bad) 2008-Apr-27 00:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.424 (still bad) 2008-Apr-27 00:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.422 (still bad) 2008-Apr-27 00:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.421 (still bad) 2008-Apr-27 00:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.422 (still bad) 2008-Apr-27 00:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.419 (still bad) 2008-Apr-27 00:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.416 (still bad) 2008-Apr-27 00:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.415 (still bad) 2008-Apr-27 00:27:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.337 2008-Apr-27 00:28:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.401 > 1.4)! 2008-Apr-27 00:28:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.401 0.906 0.930 2008-Apr-27 00:28:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.980 1.003 1.104 2008-Apr-27 00:28:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.031 1.018 0.919 2008-Apr-27 00:28:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.068 0.914 0.954 2008-Apr-27 00:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.403 (still bad) 2008-Apr-27 00:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.401 (still bad) 2008-Apr-27 00:28:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.399 2008-Apr-27 00:29:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:29:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:29:01 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-27 00:29:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:29:01 LOG5 end_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-27 00:29:01 LOG1 fixed_driftmap: New position: year = 2008.3231215618425 RA = 14:23:41.4 RA/Dec = 14:24:08.7 +01:32:25.3 2008-Apr-27 00:29:01 NOTE fixed_driftmap: Correcting ZA to 16:48:48.4 ... 2008-Apr-27 00:29:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8134389654 -CF 2008-Apr-27 00:29:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 00:29:01 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 00:29:01 LOG5 begin_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-27 00:29:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 00:29:01 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 00:29:01 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 00:29:01 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-27 00:29:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 00:29:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 00:29:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:29:01 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 00:29:01 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-27 00:29:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8134389654 -CF 2008-Apr-27 00:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:29:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 00:29:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:29:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 00:29:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 00:29:01 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-27 00:29:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 00:29:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:29:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 00:29:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:29:02 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:29:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:29:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:29:02 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:29:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 00:29:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:29:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:29:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:29:02 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:29:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:29:02 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:29:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:29:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 00:29:02 LOG5 finish_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 00:29:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:29:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 00:29:02 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 00:29:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 00:29:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 00:29:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:29:02 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:29:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 00:29:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:29:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:29:02 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 00:29:02 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 00:29:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:29:02 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 00:29:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:29:02 INFO2 take_spectra: Starting WAPP scan: 811800005 2008-Apr-27 00:29:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 00:29:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:29:02 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-27 00:29:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:29:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16143.00 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:29:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:29:04 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-27 00:29:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:29:04 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-27 00:29:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 00:29:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 00:29:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 00:29:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:29:04 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-27 00:29:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:29:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 00:29:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:29:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:29:04 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-27 00:29:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 00:29:04 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 00:29:04 LOG5 finish_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-27 00:29:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 00:29:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:29:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 00:29:04 LOG5 end_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-27 00:29:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Apr-27 00:29:04 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Apr-27 00:29:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 00:29:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 00:29:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 00:29:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 00:29:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 00:29:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 00:29:05 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 00:29:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:29:05 LOG5 begin_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-27 00:29:05 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 00:29:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:29:05 INFO2 take_spectra: Starting WAPP scan: 811800006 2008-Apr-27 00:29:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 00:29:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:29:05 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-27 00:29:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 00:29:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:29:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.771 > 1.4)! 2008-Apr-27 00:29:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.253 1.771 1.195 1.225 2008-Apr-27 00:29:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.417 1.339 1.362 1.484 2008-Apr-27 00:29:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.329 1.404 1.398 1.219 2008-Apr-27 00:29:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.451 1.473 1.267 1.315 2008-Apr-27 00:29:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0002.fits 2008-Apr-27 00:29:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16146.00 2008-Apr-27 00:29:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0002.fits} 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.473 (still bad) 2008-Apr-27 00:29:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.391 2008-Apr-27 00:31:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.497 > 1.4)! 2008-Apr-27 00:31:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.497 0.915 0.929 2008-Apr-27 00:31:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.977 1.000 1.102 2008-Apr-27 00:31:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.031 1.022 0.923 2008-Apr-27 00:31:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.078 0.923 0.963 2008-Apr-27 00:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.505 (still bad) 2008-Apr-27 00:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.504 (still bad) 2008-Apr-27 00:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.507 (still bad) 2008-Apr-27 00:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.507 (still bad) 2008-Apr-27 00:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.508 (still bad) 2008-Apr-27 00:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.509 (still bad) 2008-Apr-27 00:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.512 (still bad) 2008-Apr-27 00:31:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.326 2008-Apr-27 00:31:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.440 > 1.4)! 2008-Apr-27 00:31:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.440 0.911 0.926 2008-Apr-27 00:31:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.984 1.003 1.104 2008-Apr-27 00:31:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 1.032 1.022 0.920 2008-Apr-27 00:31:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 1.071 0.918 0.957 2008-Apr-27 00:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.418 (still bad) 2008-Apr-27 00:31:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.341 2008-Apr-27 00:31:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.425 > 1.4)! 2008-Apr-27 00:31:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.425 0.913 0.927 2008-Apr-27 00:31:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 0.993 1.003 1.103 2008-Apr-27 00:31:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.031 1.024 0.920 2008-Apr-27 00:31:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 1.069 0.917 0.954 2008-Apr-27 00:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.504 (still bad) 2008-Apr-27 00:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.558 (still bad) 2008-Apr-27 00:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.567 (still bad) 2008-Apr-27 00:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.573 (still bad) 2008-Apr-27 00:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.913 and 1.590 (still bad) 2008-Apr-27 00:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.597 (still bad) 2008-Apr-27 00:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.597 (still bad) 2008-Apr-27 00:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.597 (still bad) 2008-Apr-27 00:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.595 (still bad) 2008-Apr-27 00:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.593 (still bad) 2008-Apr-27 00:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.594 (still bad) 2008-Apr-27 00:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 1.591 (still bad) 2008-Apr-27 00:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.588 (still bad) 2008-Apr-27 00:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.586 (still bad) 2008-Apr-27 00:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.582 (still bad) 2008-Apr-27 00:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.581 (still bad) 2008-Apr-27 00:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.586 (still bad) 2008-Apr-27 00:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.590 (still bad) 2008-Apr-27 00:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.401 (still bad) 2008-Apr-27 00:32:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.203 2008-Apr-27 00:32:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.501 > 1.4)! 2008-Apr-27 00:32:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.501 0.912 0.926 2008-Apr-27 00:32:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.978 1.001 1.102 2008-Apr-27 00:32:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.030 1.021 0.920 2008-Apr-27 00:32:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 1.069 0.915 0.956 2008-Apr-27 00:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.539 (still bad) 2008-Apr-27 00:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.470 (still bad) 2008-Apr-27 00:32:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.365 2008-Apr-27 00:32:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.483 > 1.4)! 2008-Apr-27 00:32:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.483 0.911 0.927 2008-Apr-27 00:32:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.980 1.001 1.103 2008-Apr-27 00:32:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.033 1.020 0.920 2008-Apr-27 00:32:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 1.069 0.915 0.955 2008-Apr-27 00:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.499 (still bad) 2008-Apr-27 00:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 1.505 (still bad) 2008-Apr-27 00:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.514 (still bad) 2008-Apr-27 00:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.518 (still bad) 2008-Apr-27 00:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.517 (still bad) 2008-Apr-27 00:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.521 (still bad) 2008-Apr-27 00:32:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.345 2008-Apr-27 00:32:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.411 > 1.4)! 2008-Apr-27 00:32:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.411 0.913 0.928 2008-Apr-27 00:32:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.978 1.003 1.102 2008-Apr-27 00:32:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.031 1.020 0.919 2008-Apr-27 00:32:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 1.067 0.915 0.954 2008-Apr-27 00:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.459 (still bad) 2008-Apr-27 00:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.402 (still bad) 2008-Apr-27 00:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.419 (still bad) 2008-Apr-27 00:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.432 (still bad) 2008-Apr-27 00:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.422 (still bad) 2008-Apr-27 00:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.434 (still bad) 2008-Apr-27 00:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.443 (still bad) 2008-Apr-27 00:33:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.376 2008-Apr-27 00:33:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.415 > 1.4)! 2008-Apr-27 00:33:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.415 0.909 0.928 2008-Apr-27 00:33:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.976 1.001 1.103 2008-Apr-27 00:33:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.031 1.018 0.918 2008-Apr-27 00:33:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 1.070 0.916 0.955 2008-Apr-27 00:33:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.339 2008-Apr-27 00:33:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.423 > 1.4)! 2008-Apr-27 00:33:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.423 0.912 0.930 2008-Apr-27 00:33:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.976 1.002 1.103 2008-Apr-27 00:33:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 1.028 1.021 0.920 2008-Apr-27 00:33:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 1.070 0.917 0.956 2008-Apr-27 00:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.442 (still bad) 2008-Apr-27 00:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.455 (still bad) 2008-Apr-27 00:33:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.381 2008-Apr-27 00:33:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.402 > 1.4)! 2008-Apr-27 00:33:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.402 0.906 0.929 2008-Apr-27 00:33:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.975 1.002 1.103 2008-Apr-27 00:33:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.028 1.020 0.921 2008-Apr-27 00:33:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 1.073 0.919 0.959 2008-Apr-27 00:33:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.358 2008-Apr-27 00:33:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.444 > 1.4)! 2008-Apr-27 00:33:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.444 0.911 0.929 2008-Apr-27 00:33:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.977 1.000 1.102 2008-Apr-27 00:33:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 1.028 1.022 0.919 2008-Apr-27 00:33:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 1.071 0.917 0.957 2008-Apr-27 00:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.453 (still bad) 2008-Apr-27 00:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.500 (still bad) 2008-Apr-27 00:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.507 (still bad) 2008-Apr-27 00:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.515 (still bad) 2008-Apr-27 00:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.521 (still bad) 2008-Apr-27 00:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.529 (still bad) 2008-Apr-27 00:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.526 (still bad) 2008-Apr-27 00:33:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.178 2008-Apr-27 00:34:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.416 > 1.4)! 2008-Apr-27 00:34:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.416 0.908 0.927 2008-Apr-27 00:34:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.056 0.987 1.002 1.102 2008-Apr-27 00:34:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.025 1.018 0.918 2008-Apr-27 00:34:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.070 0.915 0.954 2008-Apr-27 00:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.410 (still bad) 2008-Apr-27 00:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.430 (still bad) 2008-Apr-27 00:34:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.915 and 1.287 2008-Apr-27 00:34:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.408 > 1.4)! 2008-Apr-27 00:34:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.408 0.911 0.930 2008-Apr-27 00:34:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.981 1.002 1.102 2008-Apr-27 00:34:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.024 1.021 0.918 2008-Apr-27 00:34:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 1.070 0.915 0.954 2008-Apr-27 00:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.415 (still bad) 2008-Apr-27 00:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.423 (still bad) 2008-Apr-27 00:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 1.429 (still bad) 2008-Apr-27 00:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.428 (still bad) 2008-Apr-27 00:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.431 (still bad) 2008-Apr-27 00:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.431 (still bad) 2008-Apr-27 00:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.432 (still bad) 2008-Apr-27 00:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.433 (still bad) 2008-Apr-27 00:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.436 (still bad) 2008-Apr-27 00:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.436 (still bad) 2008-Apr-27 00:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.437 (still bad) 2008-Apr-27 00:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.437 (still bad) 2008-Apr-27 00:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.435 (still bad) 2008-Apr-27 00:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.438 (still bad) 2008-Apr-27 00:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.437 (still bad) 2008-Apr-27 00:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.438 (still bad) 2008-Apr-27 00:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.438 (still bad) 2008-Apr-27 00:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.436 (still bad) 2008-Apr-27 00:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.437 (still bad) 2008-Apr-27 00:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.436 (still bad) 2008-Apr-27 00:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.435 (still bad) 2008-Apr-27 00:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.434 (still bad) 2008-Apr-27 00:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.434 (still bad) 2008-Apr-27 00:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.432 (still bad) 2008-Apr-27 00:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.435 (still bad) 2008-Apr-27 00:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.435 (still bad) 2008-Apr-27 00:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.433 (still bad) 2008-Apr-27 00:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.429 (still bad) 2008-Apr-27 00:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.430 (still bad) 2008-Apr-27 00:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.431 (still bad) 2008-Apr-27 00:35:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.429 > 1.4)! 2008-Apr-27 00:35:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.429 0.897 0.917 2008-Apr-27 00:35:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.978 1.002 1.104 2008-Apr-27 00:35:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 1.030 1.018 0.919 2008-Apr-27 00:35:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 1.068 0.915 0.954 2008-Apr-27 00:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.430 (still bad) 2008-Apr-27 00:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.425 (still bad) 2008-Apr-27 00:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.426 (still bad) 2008-Apr-27 00:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.426 (still bad) 2008-Apr-27 00:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.425 (still bad) 2008-Apr-27 00:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.422 (still bad) 2008-Apr-27 00:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.423 (still bad) 2008-Apr-27 00:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.420 (still bad) 2008-Apr-27 00:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.421 (still bad) 2008-Apr-27 00:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.425 (still bad) 2008-Apr-27 00:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.424 (still bad) 2008-Apr-27 00:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.421 (still bad) 2008-Apr-27 00:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.422 (still bad) 2008-Apr-27 00:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.422 (still bad) 2008-Apr-27 00:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.419 (still bad) 2008-Apr-27 00:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.419 (still bad) 2008-Apr-27 00:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.416 (still bad) 2008-Apr-27 00:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.416 (still bad) 2008-Apr-27 00:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.414 (still bad) 2008-Apr-27 00:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.413 (still bad) 2008-Apr-27 00:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.416 (still bad) 2008-Apr-27 00:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.413 (still bad) 2008-Apr-27 00:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.412 (still bad) 2008-Apr-27 00:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.411 (still bad) 2008-Apr-27 00:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.409 (still bad) 2008-Apr-27 00:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.410 (still bad) 2008-Apr-27 00:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.412 (still bad) 2008-Apr-27 00:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.410 (still bad) 2008-Apr-27 00:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.410 (still bad) 2008-Apr-27 00:36:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.411 > 1.4)! 2008-Apr-27 00:36:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.411 0.897 0.913 2008-Apr-27 00:36:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.976 1.002 1.103 2008-Apr-27 00:36:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.028 1.016 0.918 2008-Apr-27 00:36:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 1.067 0.914 0.954 2008-Apr-27 00:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.410 (still bad) 2008-Apr-27 00:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.409 (still bad) 2008-Apr-27 00:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.406 (still bad) 2008-Apr-27 00:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.407 (still bad) 2008-Apr-27 00:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.408 (still bad) 2008-Apr-27 00:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.407 (still bad) 2008-Apr-27 00:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.406 (still bad) 2008-Apr-27 00:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.404 (still bad) 2008-Apr-27 00:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.401 (still bad) 2008-Apr-27 00:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.403 (still bad) 2008-Apr-27 00:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.401 (still bad) 2008-Apr-27 00:37:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.400 2008-Apr-27 00:37:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.401 > 1.4)! 2008-Apr-27 00:37:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 1.401 0.897 0.910 2008-Apr-27 00:37:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.977 1.002 1.102 2008-Apr-27 00:37:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.027 1.021 0.920 2008-Apr-27 00:37:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.066 0.914 0.952 2008-Apr-27 00:37:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.398 2008-Apr-27 00:39:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:39:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:39:06 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-27 00:39:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:39:06 LOG5 end_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-27 00:39:06 LOG1 fixed_driftmap: New position: year = 2008.3231407331357 RA = 14:33:48.1 RA/Dec = 14:34:15.3 +01:32:29.6 2008-Apr-27 00:39:06 NOTE fixed_driftmap: Correcting ZA to 16:48:44.1 ... 2008-Apr-27 00:39:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8122554702 -CF 2008-Apr-27 00:39:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 00:39:06 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 00:39:06 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 00:39:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 00:39:06 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 00:39:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 00:39:06 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-27 00:39:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 00:39:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 00:39:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:39:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 00:39:06 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-27 00:39:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8122554702 -CF 2008-Apr-27 00:39:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:39:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 00:39:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:39:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:39:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 00:39:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 00:39:06 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-27 00:39:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 00:39:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:39:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 00:39:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:39:07 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:39:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:39:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:39:07 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:39:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 00:39:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:39:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:39:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:39:07 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:39:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:39:07 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:39:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:39:07 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 00:39:07 LOG5 finish_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 00:39:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:39:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 00:39:07 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 00:39:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 00:39:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 00:39:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:39:07 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:39:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 00:39:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:39:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:39:07 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 00:39:07 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 00:39:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:39:07 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 00:39:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:39:07 INFO2 take_spectra: Starting WAPP scan: 811800007 2008-Apr-27 00:39:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 00:39:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:39:07 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 00:39:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:39:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16748.00 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:39:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:39:09 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-27 00:39:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:39:09 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-27 00:39:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 00:39:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 00:39:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 00:39:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:39:09 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 00:39:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:39:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 00:39:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:39:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:39:09 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-27 00:39:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 00:39:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 00:39:09 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 00:39:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 00:39:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:39:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 00:39:09 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-27 00:39:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Apr-27 00:39:09 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Apr-27 00:39:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 00:39:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 00:39:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 00:39:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 00:39:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 00:39:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 00:39:10 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 00:39:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:39:10 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-27 00:39:10 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 00:39:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:39:10 INFO2 take_spectra: Starting WAPP scan: 811800008 2008-Apr-27 00:39:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 00:39:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:39:10 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-27 00:39:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 00:39:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:39:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0003.fits 2008-Apr-27 00:39:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16751.00 2008-Apr-27 00:39:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0003.fits} 2008-Apr-27 00:39:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.753 > 1.4)! 2008-Apr-27 00:39:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.259 1.753 1.192 1.213 2008-Apr-27 00:39:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.406 1.327 1.365 1.484 2008-Apr-27 00:39:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.322 1.400 1.400 1.229 2008-Apr-27 00:39:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.480 1.503 1.292 1.341 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.503 (still bad) 2008-Apr-27 00:39:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.393 2008-Apr-27 00:39:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.407 > 1.4)! 2008-Apr-27 00:39:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 1.407 0.896 0.909 2008-Apr-27 00:39:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.977 1.003 1.104 2008-Apr-27 00:39:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 1.027 1.020 0.923 2008-Apr-27 00:39:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 1.097 0.936 0.977 2008-Apr-27 00:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.423 (still bad) 2008-Apr-27 00:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.445 (still bad) 2008-Apr-27 00:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.460 (still bad) 2008-Apr-27 00:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.476 (still bad) 2008-Apr-27 00:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.480 (still bad) 2008-Apr-27 00:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.474 (still bad) 2008-Apr-27 00:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.459 (still bad) 2008-Apr-27 00:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.434 (still bad) 2008-Apr-27 00:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.415 (still bad) 2008-Apr-27 00:39:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.397 2008-Apr-27 00:49:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:49:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:49:11 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-27 00:49:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:49:11 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-27 00:49:11 LOG1 fixed_driftmap: New position: year = 2008.3231599044288 RA = 14:43:54.8 RA/Dec = 14:44:22.0 +01:32:34.1 2008-Apr-27 00:49:11 NOTE fixed_driftmap: Correcting ZA to 16:48:39.6 ... 2008-Apr-27 00:49:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8109973677 -CF 2008-Apr-27 00:49:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 00:49:11 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 00:49:11 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 00:49:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 00:49:11 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 00:49:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 00:49:11 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-27 00:49:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 00:49:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 00:49:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:49:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 00:49:11 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-27 00:49:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8109973677 -CF 2008-Apr-27 00:49:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:49:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 00:49:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:49:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:49:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 00:49:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 00:49:11 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-27 00:49:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 00:49:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:49:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 00:49:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:49:11 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:49:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:49:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:49:12 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:49:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 00:49:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:49:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:49:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:49:12 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:49:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:49:12 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:49:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:49:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 00:49:12 LOG5 finish_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 00:49:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:49:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 00:49:12 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 00:49:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 00:49:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 00:49:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:49:12 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:49:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 00:49:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:49:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:49:12 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 00:49:12 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 00:49:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:49:12 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 00:49:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:49:12 INFO2 take_spectra: Starting WAPP scan: 811800009 2008-Apr-27 00:49:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 00:49:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:49:12 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-27 00:49:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:49:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17353.00 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:49:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:49:14 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-27 00:49:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:49:14 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-27 00:49:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 00:49:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 00:49:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 00:49:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:49:14 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-27 00:49:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.680 > 1.4)! 2008-Apr-27 00:49:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.252 1.680 1.192 1.208 2008-Apr-27 00:49:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.406 1.334 1.373 1.491 2008-Apr-27 00:49:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 1.041 1.025 0.923 2008-Apr-27 00:49:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.454 1.473 1.268 1.315 2008-Apr-27 00:49:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:49:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 00:49:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:49:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:49:14 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-27 00:49:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 00:49:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 00:49:14 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 00:49:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 00:49:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:49:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 00:49:14 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-27 00:49:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Apr-27 00:49:14 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Apr-27 00:49:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 00:49:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 00:49:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 00:49:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 00:49:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 00:49:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 00:49:15 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 00:49:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:49:15 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-27 00:49:15 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 00:49:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:49:15 INFO2 take_spectra: Starting WAPP scan: 811800010 2008-Apr-27 00:49:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 00:49:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:49:15 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-27 00:49:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 00:49:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:49:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0004.fits 2008-Apr-27 00:49:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17356.00 2008-Apr-27 00:49:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0004.fits} 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.473 (still bad) 2008-Apr-27 00:49:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.322 2008-Apr-27 00:59:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:59:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:59:16 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-27 00:59:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:59:16 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-27 00:59:16 LOG1 fixed_driftmap: New position: year = 2008.3231790757218 RA = 14:54:01.4 RA/Dec = 14:54:28.7 +01:32:38.9 2008-Apr-27 00:59:16 NOTE fixed_driftmap: Correcting ZA to 16:48:34.8 ... 2008-Apr-27 00:59:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8096671133 -CF 2008-Apr-27 00:59:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 00:59:16 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 00:59:16 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-27 00:59:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 00:59:16 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 00:59:16 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 00:59:16 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 00:59:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 00:59:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 00:59:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:59:16 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 00:59:16 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-27 00:59:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8096671133 -CF 2008-Apr-27 00:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:59:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 00:59:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 00:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:59:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 00:59:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 00:59:16 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-27 00:59:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 00:59:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:59:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 00:59:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:59:16 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 00:59:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:59:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:59:17 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:59:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 00:59:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 00:59:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:59:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 00:59:17 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 00:59:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 00:59:17 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 00:59:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 00:59:17 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 00:59:17 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 00:59:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:59:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 00:59:17 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 00:59:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 00:59:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 00:59:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:59:17 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:59:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 00:59:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:59:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:59:17 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 00:59:17 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 00:59:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:59:17 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 00:59:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:59:17 INFO2 take_spectra: Starting WAPP scan: 811800011 2008-Apr-27 00:59:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 00:59:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:59:17 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-27 00:59:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:59:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17958.00 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 00:59:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 00:59:19 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-27 00:59:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 00:59:19 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-27 00:59:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 00:59:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 00:59:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 00:59:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 00:59:19 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-27 00:59:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.641 > 1.4)! 2008-Apr-27 00:59:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.251 1.641 1.190 1.204 2008-Apr-27 00:59:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.409 1.336 1.375 1.494 2008-Apr-27 00:59:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 1.041 1.034 0.936 2008-Apr-27 00:59:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 1.070 0.921 0.955 2008-Apr-27 00:59:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 00:59:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 00:59:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 00:59:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 00:59:19 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-27 00:59:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 00:59:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 00:59:19 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-27 00:59:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 00:59:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 00:59:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 00:59:19 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-27 00:59:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Apr-27 00:59:19 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Apr-27 00:59:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 00:59:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 00:59:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 00:59:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 00:59:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 00:59:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 00:59:20 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 00:59:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 00:59:20 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-27 00:59:20 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 00:59:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 00:59:20 INFO2 take_spectra: Starting WAPP scan: 811800012 2008-Apr-27 00:59:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 00:59:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 00:59:20 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-27 00:59:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 00:59:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 00:59:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0005.fits 2008-Apr-27 00:59:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17961.00 2008-Apr-27 00:59:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0005.fits} 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 00:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.477 (still bad) 2008-Apr-27 00:59:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.895 and 1.295 2008-Apr-27 01:09:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:09:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:09:21 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-27 01:09:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:09:21 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-27 01:09:21 LOG1 fixed_driftmap: New position: year = 2008.3231982470149 RA = 15:04:08.1 RA/Dec = 15:04:35.3 +01:32:43.9 2008-Apr-27 01:09:21 NOTE fixed_driftmap: Correcting ZA to 16:48:29.8 ... 2008-Apr-27 01:09:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8082672872 -CF 2008-Apr-27 01:09:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 01:09:21 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 01:09:21 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 01:09:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 01:09:21 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 01:09:21 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 01:09:21 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-27 01:09:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 01:09:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 01:09:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:09:21 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 01:09:21 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-27 01:09:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8082672872 -CF 2008-Apr-27 01:09:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:09:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 01:09:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:09:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:09:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 01:09:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 01:09:21 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-27 01:09:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 01:09:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:09:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 01:09:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:09:21 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:09:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:09:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:09:22 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:09:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 01:09:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:09:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:09:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:09:22 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:09:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:09:22 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:09:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:09:22 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 01:09:22 LOG5 finish_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 01:09:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:09:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 01:09:22 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 01:09:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 01:09:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 01:09:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:09:22 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:09:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 01:09:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:09:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:09:22 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 01:09:22 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 01:09:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:09:22 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 01:09:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:09:22 INFO2 take_spectra: Starting WAPP scan: 811800013 2008-Apr-27 01:09:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 01:09:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:09:22 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-27 01:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:09:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18563.00 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:09:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:09:24 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-27 01:09:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:09:24 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-27 01:09:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 01:09:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 01:09:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 01:09:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:09:24 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-27 01:09:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:09:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 01:09:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.616 > 1.4)! 2008-Apr-27 01:09:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.251 1.616 1.182 1.196 2008-Apr-27 01:09:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.408 1.332 1.363 1.490 2008-Apr-27 01:09:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 1.038 1.020 0.923 2008-Apr-27 01:09:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.069 0.913 0.955 2008-Apr-27 01:09:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:09:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:09:24 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-27 01:09:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 01:09:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 01:09:24 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 01:09:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 01:09:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:09:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 01:09:24 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-27 01:09:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Apr-27 01:09:24 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Apr-27 01:09:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 01:09:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 01:09:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 01:09:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 01:09:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 01:09:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 01:09:25 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 01:09:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:09:25 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-27 01:09:25 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 01:09:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:09:25 INFO2 take_spectra: Starting WAPP scan: 811800014 2008-Apr-27 01:09:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 01:09:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:09:25 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-27 01:09:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 01:09:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:09:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0006.fits 2008-Apr-27 01:09:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18566.00 2008-Apr-27 01:09:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0006.fits} 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 1.472 (still bad) 2008-Apr-27 01:09:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.276 2008-Apr-27 01:19:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:19:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:19:26 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-27 01:19:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:19:26 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-27 01:19:26 LOG1 fixed_driftmap: New position: year = 2008.3232174183081 RA = 15:14:14.8 RA/Dec = 15:14:42.0 +01:32:49.2 2008-Apr-27 01:19:26 NOTE fixed_driftmap: Correcting ZA to 16:48:24.5 ... 2008-Apr-27 01:19:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8068006124 -CF 2008-Apr-27 01:19:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 01:19:26 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 01:19:26 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 01:19:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 01:19:26 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 01:19:26 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 01:19:26 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-27 01:19:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 01:19:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 01:19:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:19:26 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 01:19:26 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 01:19:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8068006124 -CF 2008-Apr-27 01:19:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:19:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 01:19:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:19:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:19:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 01:19:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 01:19:26 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-27 01:19:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 01:19:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:19:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 01:19:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:19:26 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-27 01:19:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:19:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:19:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:19:27 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:19:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 01:19:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:19:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:19:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:19:27 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:19:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:19:27 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:19:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:19:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 01:19:27 LOG5 finish_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 01:19:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:19:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 01:19:27 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 01:19:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 01:19:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 01:19:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:19:27 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:19:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 01:19:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:19:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:19:27 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 01:19:27 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 01:19:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:19:27 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 01:19:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:19:27 INFO2 take_spectra: Starting WAPP scan: 811800015 2008-Apr-27 01:19:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 01:19:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:19:27 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-27 01:19:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:19:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19168.00 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:19:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:19:29 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-27 01:19:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:19:29 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-27 01:19:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 01:19:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 01:19:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 01:19:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:19:29 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-27 01:19:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:19:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 01:19:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:19:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:19:29 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-27 01:19:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 01:19:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 01:19:29 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 01:19:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 01:19:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:19:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 01:19:29 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-27 01:19:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Apr-27 01:19:29 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Apr-27 01:19:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 01:19:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 01:19:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 01:19:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 01:19:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 01:19:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 01:19:30 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 01:19:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:19:30 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-27 01:19:30 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 01:19:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:19:30 INFO2 take_spectra: Starting WAPP scan: 811800016 2008-Apr-27 01:19:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 01:19:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:19:30 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-27 01:19:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 01:19:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.596 > 1.4)! 2008-Apr-27 01:19:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.268 1.596 1.188 1.188 2008-Apr-27 01:19:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.407 1.332 1.366 1.484 2008-Apr-27 01:19:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.337 1.410 1.403 1.224 2008-Apr-27 01:19:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.458 1.469 1.270 1.312 2008-Apr-27 01:19:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:19:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0007.fits 2008-Apr-27 01:19:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19171.00 2008-Apr-27 01:19:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0007.fits} 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.923 and 1.596 (still bad) 2008-Apr-27 01:19:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.258 2008-Apr-27 01:29:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:29:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:29:31 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-27 01:29:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:29:31 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-27 01:29:31 LOG1 fixed_driftmap: New position: year = 2008.3232365896013 RA = 15:24:21.5 RA/Dec = 15:24:48.6 +01:32:54.7 2008-Apr-27 01:29:31 NOTE fixed_driftmap: Correcting ZA to 16:48:19.0 ... 2008-Apr-27 01:29:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8052699512 -CF 2008-Apr-27 01:29:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 01:29:31 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 01:29:31 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-27 01:29:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 01:29:31 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 01:29:31 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 01:29:31 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-27 01:29:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 01:29:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 01:29:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:29:31 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 01:29:31 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-27 01:29:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8052699512 -CF 2008-Apr-27 01:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:29:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 01:29:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:29:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 01:29:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 01:29:31 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-27 01:29:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 01:29:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:29:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 01:29:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:29:31 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:29:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:29:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:29:32 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:29:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 01:29:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:29:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:29:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:29:32 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:29:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:29:32 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:29:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:29:32 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 01:29:32 LOG5 finish_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 01:29:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:29:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 01:29:32 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 01:29:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 01:29:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 01:29:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:29:32 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:29:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 01:29:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:29:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:29:32 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 01:29:32 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 01:29:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:29:32 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 01:29:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:29:32 INFO2 take_spectra: Starting WAPP scan: 811800017 2008-Apr-27 01:29:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 01:29:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:29:32 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 01:29:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:29:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19773.00 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:29:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:29:34 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-27 01:29:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:29:34 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-27 01:29:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 01:29:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 01:29:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 01:29:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:29:34 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-27 01:29:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:29:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 01:29:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:29:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:29:34 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-27 01:29:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 01:29:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 01:29:34 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-27 01:29:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 01:29:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:29:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 01:29:34 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-27 01:29:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Apr-27 01:29:34 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Apr-27 01:29:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 01:29:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 01:29:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 01:29:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 01:29:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 01:29:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 01:29:35 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 01:29:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:29:35 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-27 01:29:35 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 01:29:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:29:35 INFO2 take_spectra: Starting WAPP scan: 811800018 2008-Apr-27 01:29:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 01:29:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:29:35 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-27 01:29:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 01:29:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:29:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.600 > 1.4)! 2008-Apr-27 01:29:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.259 1.600 1.193 1.204 2008-Apr-27 01:29:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.413 1.337 1.378 1.491 2008-Apr-27 01:29:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.340 1.419 1.408 1.226 2008-Apr-27 01:29:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.463 1.475 1.276 1.317 2008-Apr-27 01:29:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19776.00 2008-Apr-27 01:29:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0008.fits 2008-Apr-27 01:29:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0008.fits} 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.925 and 1.600 (still bad) 2008-Apr-27 01:29:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.263 2008-Apr-27 01:34:58 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:34:58.294 (seconds: 5698.294)!} 2008-Apr-27 01:34:58 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:34:58.294 (seconds: 5698.294)! 2008-Apr-27 01:34:59 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 5697.0 to 5698.0! 2008-Apr-27 01:35:00 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (5697.0 - 5699.0)! 2008-Apr-27 01:39:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:39:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:39:36 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-27 01:39:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:39:36 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-27 01:39:36 LOG1 fixed_driftmap: New position: year = 2008.3232557608944 RA = 15:34:28.1 RA/Dec = 15:34:55.3 +01:33:00.5 2008-Apr-27 01:39:36 NOTE fixed_driftmap: Correcting ZA to 16:48:13.2 ... 2008-Apr-27 01:39:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8036782727 -CF 2008-Apr-27 01:39:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 01:39:36 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 01:39:36 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 01:39:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 01:39:36 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 01:39:36 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 01:39:36 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-27 01:39:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 01:39:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 01:39:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:39:36 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 01:39:36 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-27 01:39:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8036782727 -CF 2008-Apr-27 01:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:39:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 01:39:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:39:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 01:39:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 01:39:36 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-27 01:39:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 01:39:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:39:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 01:39:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:39:36 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:39:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:39:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:39:37 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:39:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 01:39:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:39:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:39:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:39:37 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:39:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:39:37 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:39:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:39:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 01:39:37 LOG5 finish_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 01:39:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:39:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 01:39:37 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 01:39:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 01:39:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 01:39:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:39:37 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:39:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 01:39:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:39:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:39:37 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 01:39:37 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 01:39:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:39:37 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-27 01:39:37 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 01:39:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:39:37 INFO2 take_spectra: Starting WAPP scan: 811800019 2008-Apr-27 01:39:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 01:39:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:39:38 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-27 01:39:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:39:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20379.00 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:39:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.609 > 1.4)! 2008-Apr-27 01:39:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.269 1.609 1.191 1.204 2008-Apr-27 01:39:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.411 1.338 1.376 1.493 2008-Apr-27 01:39:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.343 1.428 1.524 1.345 2008-Apr-27 01:39:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.461 1.483 0.924 0.964 2008-Apr-27 01:39:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:39:40 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-27 01:39:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:39:40 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-27 01:39:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 01:39:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 01:39:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 01:39:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:39:40 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-27 01:39:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:39:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 01:39:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:39:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:39:40 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-27 01:39:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 01:39:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 01:39:40 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 01:39:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 01:39:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:39:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 01:39:40 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-27 01:39:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Apr-27 01:39:40 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Apr-27 01:39:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 01:39:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 01:39:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 01:39:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 01:39:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 01:39:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 01:39:41 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 01:39:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:39:41 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-27 01:39:41 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 01:39:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:39:41 INFO2 take_spectra: Starting WAPP scan: 811800020 2008-Apr-27 01:39:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 01:39:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:39:41 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-27 01:39:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 01:39:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:39:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0009.fits 2008-Apr-27 01:39:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20382.00 2008-Apr-27 01:39:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0009.fits} 2008-Apr-27 01:39:42 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.609 (still bad) 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:39:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.285 2008-Apr-27 01:49:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:49:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:49:42 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-27 01:49:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:49:42 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-27 01:49:42 LOG1 fixed_driftmap: New position: year = 2008.3232749638755 RA = 15:44:35.8 RA/Dec = 15:45:02.9 +01:33:06.4 2008-Apr-27 01:49:42 NOTE fixed_driftmap: Correcting ZA to 16:48:07.3 ... 2008-Apr-27 01:49:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8020259160 -CF 2008-Apr-27 01:49:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 01:49:42 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 01:49:42 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 01:49:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 01:49:42 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 01:49:42 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 01:49:42 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 01:49:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 01:49:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 01:49:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:49:42 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 01:49:42 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-27 01:49:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8020259160 -CF 2008-Apr-27 01:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:49:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 01:49:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:49:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 01:49:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 01:49:42 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-27 01:49:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 01:49:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:49:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 01:49:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:49:42 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:49:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:49:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:49:43 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:49:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 01:49:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:49:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:49:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:49:43 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:49:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:49:43 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:49:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:49:43 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 01:49:43 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 01:49:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:49:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 01:49:43 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 01:49:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 01:49:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 01:49:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:49:43 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:49:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 01:49:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:49:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:49:43 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 01:49:43 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 01:49:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:49:43 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 01:49:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:49:43 INFO2 take_spectra: Starting WAPP scan: 811800021 2008-Apr-27 01:49:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 01:49:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:49:43 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-27 01:49:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:49:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20984.00 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:49:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:49:45 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-27 01:49:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:49:45 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-27 01:49:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 01:49:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 01:49:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 01:49:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:49:45 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-27 01:49:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:49:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 01:49:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.579 > 1.4)! 2008-Apr-27 01:49:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.255 1.579 1.183 1.198 2008-Apr-27 01:49:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.405 1.335 1.364 1.489 2008-Apr-27 01:49:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.324 1.407 1.395 1.226 2008-Apr-27 01:49:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.450 1.477 1.267 1.316 2008-Apr-27 01:49:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:49:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:49:45 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-27 01:49:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 01:49:45 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 01:49:45 LOG5 finish_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 01:49:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 01:49:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:49:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 01:49:45 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-27 01:49:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Apr-27 01:49:45 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Apr-27 01:49:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 01:49:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 01:49:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 01:49:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 01:49:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 01:49:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 01:49:46 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 01:49:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:49:46 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-27 01:49:46 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 01:49:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:49:46 INFO2 take_spectra: Starting WAPP scan: 811800022 2008-Apr-27 01:49:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 01:49:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:49:46 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-27 01:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 01:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:49:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0010.fits 2008-Apr-27 01:49:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20987.00 2008-Apr-27 01:49:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0010.fits} 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:49:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.247 2008-Apr-27 01:59:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:59:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:59:47 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-27 01:59:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:59:47 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-27 01:59:47 LOG1 fixed_driftmap: New position: year = 2008.3232941351687 RA = 15:54:42.5 RA/Dec = 15:55:09.6 +01:33:12.5 2008-Apr-27 01:59:47 NOTE fixed_driftmap: Correcting ZA to 16:48:01.2 ... 2008-Apr-27 01:59:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.8003215279 -CF 2008-Apr-27 01:59:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 01:59:47 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 01:59:47 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 01:59:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 01:59:47 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 01:59:47 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 01:59:47 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 01:59:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 01:59:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 01:59:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:59:47 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 01:59:47 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-27 01:59:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.8003215279 -CF 2008-Apr-27 01:59:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:59:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 01:59:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 01:59:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:59:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 01:59:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 01:59:47 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-27 01:59:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 01:59:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:59:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 01:59:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:59:47 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 01:59:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:59:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:59:48 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:59:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 01:59:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 01:59:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:59:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 01:59:48 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 01:59:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 01:59:48 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 01:59:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 01:59:48 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 01:59:48 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 01:59:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:59:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 01:59:48 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 01:59:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 01:59:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 01:59:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:59:48 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:59:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 01:59:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:59:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:59:48 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 01:59:48 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 01:59:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:59:48 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 01:59:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:59:48 INFO2 take_spectra: Starting WAPP scan: 811800023 2008-Apr-27 01:59:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 01:59:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:59:48 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-27 01:59:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:59:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21589.00 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 01:59:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 01:59:50 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-27 01:59:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 01:59:50 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-27 01:59:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 01:59:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 01:59:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 01:59:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 01:59:50 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 01:59:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 01:59:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 01:59:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.565 > 1.4)! 2008-Apr-27 01:59:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.256 1.565 1.182 1.192 2008-Apr-27 01:59:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.404 1.334 1.359 1.490 2008-Apr-27 01:59:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.333 1.414 1.392 1.228 2008-Apr-27 01:59:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.457 1.480 1.269 1.318 2008-Apr-27 01:59:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 01:59:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 01:59:50 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-27 01:59:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 01:59:50 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 01:59:50 LOG5 finish_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 01:59:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 01:59:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 01:59:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 01:59:50 LOG5 end_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-27 01:59:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Apr-27 01:59:51 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Apr-27 01:59:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 01:59:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 01:59:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 01:59:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 01:59:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 01:59:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 01:59:51 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 01:59:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 01:59:51 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 01:59:51 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 01:59:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 01:59:51 INFO2 take_spectra: Starting WAPP scan: 811800024 2008-Apr-27 01:59:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 01:59:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 01:59:51 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-27 01:59:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 01:59:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 01:59:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0011.fits 2008-Apr-27 01:59:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21592.00 2008-Apr-27 01:59:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0011.fits} 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 01:59:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.236 2008-Apr-27 02:04:56 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:04:56.294 (seconds: 7496.294)!} 2008-Apr-27 02:04:56 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:04:56.294 (seconds: 7496.294)! 2008-Apr-27 02:04:57 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 7495.0 to 7496.0! 2008-Apr-27 02:04:58 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (7495.0 - 7497.0)! 2008-Apr-27 02:09:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:09:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:09:52 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-27 02:09:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:09:52 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-27 02:09:52 LOG1 fixed_driftmap: New position: year = 2008.3233133064618 RA = 16:04:49.2 RA/Dec = 16:05:16.3 +01:33:18.9 2008-Apr-27 02:09:52 NOTE fixed_driftmap: Correcting ZA to 16:47:54.8 ... 2008-Apr-27 02:09:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.7985657602 -CF 2008-Apr-27 02:09:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 02:09:52 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 02:09:52 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 02:09:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 02:09:52 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 02:09:52 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 02:09:52 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-27 02:09:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 02:09:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 02:09:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:09:52 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 02:09:52 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-27 02:09:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.7985657602 -CF 2008-Apr-27 02:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:09:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 02:09:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:09:52 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 02:09:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 02:09:52 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-27 02:09:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 02:09:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:09:53 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 02:09:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:09:53 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:09:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:09:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:09:53 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:09:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 02:09:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:09:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:09:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:09:53 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:09:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:09:53 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:09:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:09:53 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 02:09:53 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 02:09:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:09:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 02:09:53 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 02:09:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 02:09:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 02:09:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:09:53 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:09:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 02:09:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:09:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:09:53 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 02:09:53 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 02:09:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:09:53 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 02:09:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:09:53 INFO2 take_spectra: Starting WAPP scan: 811800025 2008-Apr-27 02:09:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 02:09:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:09:53 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-27 02:09:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:09:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22194.00 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:09:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:09:55 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-27 02:09:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:09:55 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-27 02:09:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 02:09:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 02:09:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 02:09:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:09:55 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 02:09:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:09:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:09:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:09:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:09:55 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-27 02:09:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 02:09:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 02:09:55 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 02:09:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 02:09:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:09:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 02:09:55 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-27 02:09:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Apr-27 02:09:55 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Apr-27 02:09:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 02:09:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 02:09:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 02:09:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 02:09:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 02:09:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 02:09:56 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 02:09:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:09:56 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-27 02:09:56 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 02:09:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:09:56 INFO2 take_spectra: Starting WAPP scan: 811800026 2008-Apr-27 02:09:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 02:09:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:09:56 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-27 02:09:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 02:09:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.576 > 1.4)! 2008-Apr-27 02:09:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.263 1.576 1.185 1.206 2008-Apr-27 02:09:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.404 1.340 1.370 1.498 2008-Apr-27 02:09:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.348 1.429 1.402 1.230 2008-Apr-27 02:09:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.458 1.481 1.273 1.323 2008-Apr-27 02:09:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:09:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22197.00 2008-Apr-27 02:09:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0012.fits 2008-Apr-27 02:09:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0012.fits} 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.924 and 1.576 (still bad) 2008-Apr-27 02:10:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.249 2008-Apr-27 02:12:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.423 > 1.4)! 2008-Apr-27 02:12:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.423 0.919 0.932 2008-Apr-27 02:12:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.991 1.009 1.122 2008-Apr-27 02:12:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 1.052 1.024 0.933 2008-Apr-27 02:12:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 1.111 0.947 0.992 2008-Apr-27 02:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.919 and 1.407 (still bad) 2008-Apr-27 02:12:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.931 and 1.312 2008-Apr-27 02:13:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.933 > 1.4)! 2008-Apr-27 02:13:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 1.933 0.945 0.964 2008-Apr-27 02:13:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.050 0.998 1.008 1.121 2008-Apr-27 02:13:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 1.053 1.032 0.937 2008-Apr-27 02:13:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 1.085 0.922 0.970 2008-Apr-27 02:13:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.921 and 1.300 2008-Apr-27 02:13:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.327 > 1.4)! 2008-Apr-27 02:13:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 2.327 1.031 1.048 2008-Apr-27 02:13:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.052 0.999 1.008 1.120 2008-Apr-27 02:13:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.986 1.051 1.033 0.935 2008-Apr-27 02:13:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 1.086 0.920 0.971 2008-Apr-27 02:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.796 and 1.122 (still bad) 2008-Apr-27 02:13:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.803 and 1.121 2008-Apr-27 02:19:55 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:19:55.304 (seconds: 8395.304)!} 2008-Apr-27 02:19:55 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:19:55.304 (seconds: 8395.304)! 2008-Apr-27 02:19:56 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 8394.0 to 8395.0! 2008-Apr-27 02:19:57 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (8394.0 - 8396.0)! 2008-Apr-27 02:19:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:19:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:19:57 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-27 02:19:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:19:57 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-27 02:19:57 LOG1 fixed_driftmap: New position: year = 2008.323332477755 RA = 16:14:55.9 RA/Dec = 16:15:22.9 +01:33:25.4 2008-Apr-27 02:19:57 NOTE fixed_driftmap: Correcting ZA to 16:47:48.3 ... 2008-Apr-27 02:19:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.7967620187 -CF 2008-Apr-27 02:19:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 02:19:57 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 02:19:57 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 02:19:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 02:19:57 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 02:19:57 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 02:19:57 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 02:19:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 02:19:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 02:19:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:19:57 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 02:19:57 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 02:19:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.7967620187 -CF 2008-Apr-27 02:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:19:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 02:19:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:19:57 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 02:19:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 02:19:57 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-27 02:19:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 02:19:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:19:57 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 02:19:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:19:57 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-27 02:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:19:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:19:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:19:58 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-27 02:19:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:19:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 02:19:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:19:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:19:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:19:58 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-27 02:19:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:19:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:19:58 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-27 02:19:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:19:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:19:58 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 02:19:58 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 02:19:58 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 02:19:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:19:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 02:19:58 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-27 02:19:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 02:19:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 02:19:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 02:19:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:19:58 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 02:19:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:19:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 02:19:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:19:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:19:58 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-27 02:19:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 02:19:59 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 02:19:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:19:59 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-27 02:19:59 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 02:19:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:19:59 INFO2 take_spectra: Starting WAPP scan: 811800027 2008-Apr-27 02:19:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 02:19:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:19:59 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-27 02:19:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:19:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22800.00 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.485 > 1.4)! 2008-Apr-27 02:20:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.842 0.900 0.917 2008-Apr-27 02:20:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 0.985 1.012 1.117 2008-Apr-27 02:20:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.327 1.417 1.406 1.227 2008-Apr-27 02:20:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.460 1.485 1.277 1.327 2008-Apr-27 02:20:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:20:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:20:01 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-27 02:20:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:20:01 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-27 02:20:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 02:20:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 02:20:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 02:20:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:20:01 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-27 02:20:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:20:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:20:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:20:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:20:01 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-27 02:20:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 02:20:01 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 02:20:01 LOG5 finish_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 02:20:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 02:20:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:20:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 02:20:01 LOG5 end_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-27 02:20:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Apr-27 02:20:01 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Apr-27 02:20:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 02:20:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 02:20:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 02:20:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 02:20:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 02:20:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 02:20:02 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 02:20:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:20:02 LOG5 begin_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-27 02:20:02 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 02:20:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:20:02 INFO2 take_spectra: Starting WAPP scan: 811800028 2008-Apr-27 02:20:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 02:20:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:20:02 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-27 02:20:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 02:20:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:20:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0013.fits 2008-Apr-27 02:20:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22803.00 2008-Apr-27 02:20:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0013.fits} 2008-Apr-27 02:20:03 INFO5 check_wapp_levels: WAPP power levels are between 1.035 and 1.495 (still bad) 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:20:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.840 and 1.115 2008-Apr-27 02:30:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:30:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:30:03 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-27 02:30:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:30:03 LOG5 end_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-27 02:30:03 LOG1 fixed_driftmap: New position: year = 2008.3233516807363 RA = 16:25:03.6 RA/Dec = 16:25:30.6 +01:33:32.0 2008-Apr-27 02:30:03 NOTE fixed_driftmap: Correcting ZA to 16:47:41.7 ... 2008-Apr-27 02:30:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.7949107289 -CF 2008-Apr-27 02:30:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 02:30:03 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 02:30:03 LOG5 begin_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-27 02:30:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 02:30:03 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 02:30:03 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 02:30:03 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-27 02:30:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 02:30:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 02:30:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:30:03 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 02:30:03 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-27 02:30:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.7949107289 -CF 2008-Apr-27 02:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:30:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 02:30:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:30:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 02:30:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 02:30:03 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-27 02:30:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 02:30:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:30:04 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 02:30:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:30:04 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-27 02:30:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:30:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:30:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:30:04 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-27 02:30:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:30:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 02:30:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:30:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:30:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:30:04 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-27 02:30:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:30:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:30:04 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-27 02:30:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:30:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:30:04 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 02:30:04 LOG5 finish_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-27 02:30:04 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 02:30:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:30:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 02:30:04 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-27 02:30:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 02:30:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 02:30:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 02:30:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:30:04 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-27 02:30:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:30:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 02:30:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:30:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:30:05 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-27 02:30:05 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 02:30:05 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 02:30:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:30:05 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-27 02:30:05 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 02:30:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:30:05 INFO2 take_spectra: Starting WAPP scan: 811800029 2008-Apr-27 02:30:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 02:30:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:30:05 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-27 02:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:30:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23406.00 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.486 > 1.4)! 2008-Apr-27 02:30:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.824 0.894 0.911 2008-Apr-27 02:30:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 0.989 1.007 1.117 2008-Apr-27 02:30:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.331 1.418 1.403 1.228 2008-Apr-27 02:30:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.454 1.486 1.271 1.327 2008-Apr-27 02:30:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:30:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:30:07 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-27 02:30:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:30:07 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-27 02:30:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 02:30:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 02:30:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 02:30:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:30:07 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-27 02:30:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:30:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:30:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:30:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:30:07 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-27 02:30:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 02:30:07 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 02:30:07 LOG5 finish_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-27 02:30:07 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 02:30:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:30:07 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 02:30:07 LOG5 end_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-27 02:30:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Apr-27 02:30:07 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Apr-27 02:30:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 02:30:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 02:30:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 02:30:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 02:30:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 02:30:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 02:30:08 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 02:30:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:30:08 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-27 02:30:08 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 02:30:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:30:08 INFO2 take_spectra: Starting WAPP scan: 811800030 2008-Apr-27 02:30:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 02:30:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:30:08 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-27 02:30:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 02:30:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:30:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23409.00 2008-Apr-27 02:30:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0014.fits 2008-Apr-27 02:30:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0014.fits} 2008-Apr-27 02:30:09 INFO5 check_wapp_levels: WAPP power levels are between 1.011 and 1.495 (still bad) 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:30:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.821 and 1.116 2008-Apr-27 02:34:54 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:34:54.304 (seconds: 9294.304)!} 2008-Apr-27 02:34:54 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:34:54.304 (seconds: 9294.304)! 2008-Apr-27 02:34:55 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 9293.0 to 9294.0! 2008-Apr-27 02:34:56 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (9293.0 - 9295.0)! 2008-Apr-27 02:40:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:40:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:40:09 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-27 02:40:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:40:09 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-27 02:40:09 LOG1 fixed_driftmap: New position: year = 2008.3233708837174 RA = 16:35:11.3 RA/Dec = 16:35:38.2 +01:33:38.8 2008-Apr-27 02:40:09 NOTE fixed_driftmap: Correcting ZA to 16:47:34.9 ... 2008-Apr-27 02:40:09 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 16.7930184525 -CF 2008-Apr-27 02:40:09 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-27 02:40:09 START begin_task: Starting task 'WAPP calibration' 2008-Apr-27 02:40:09 LOG5 begin_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-27 02:40:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-27 02:40:09 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-27 02:40:09 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 02:40:09 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-27 02:40:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 02:40:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 02:40:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:40:09 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 02:40:09 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-27 02:40:09 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 16.7930184525 -CF 2008-Apr-27 02:40:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 02:40:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:40:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 02:40:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 02:40:09 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-27 02:40:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 02:40:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:40:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 02:40:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:40:09 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-27 02:40:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:40:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:40:10 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:40:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 02:40:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:40:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:40:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:40:10 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:40:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:40:10 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:40:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:40:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 02:40:10 LOG5 finish_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-27 02:40:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:40:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 02:40:10 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-27 02:40:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 02:40:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 02:40:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:40:10 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:40:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 02:40:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:40:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:40:10 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-27 02:40:10 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-27 02:40:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:40:10 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-27 02:40:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:40:10 INFO2 take_spectra: Starting WAPP scan: 811800031 2008-Apr-27 02:40:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-27 02:40:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:40:10 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-27 02:40:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:40:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24011.00 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:40:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.485 > 1.4)! 2008-Apr-27 02:40:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.813 0.891 0.904 2008-Apr-27 02:40:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.994 1.005 1.124 2008-Apr-27 02:40:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.328 1.425 1.397 1.239 2008-Apr-27 02:40:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.447 1.485 1.266 1.328 2008-Apr-27 02:40:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-27 02:40:12 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-27 02:40:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-27 02:40:12 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-27 02:40:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 02:40:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 02:40:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 02:40:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:40:12 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-27 02:40:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:40:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:40:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:40:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:40:12 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-27 02:40:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 02:40:12 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-27 02:40:12 LOG5 finish_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-27 02:40:12 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-27 02:40:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:40:12 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-27 02:40:12 LOG5 end_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-27 02:40:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Apr-27 02:40:12 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Apr-27 02:40:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-27 02:40:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-27 02:40:13 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-27 02:40:13 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-27 02:40:13 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-27 02:40:13 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-27 02:40:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-27 02:40:13 INFO2 take_spectra: Starting WAPP scan: 811800032 2008-Apr-27 02:40:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-27 02:40:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-27 02:40:13 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Apr-27 02:40:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 02:40:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:40:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0015.fits 2008-Apr-27 02:40:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24014.00 2008-Apr-27 02:40:13 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0015.fits} 2008-Apr-27 02:40:14 INFO5 check_wapp_levels: WAPP power levels are between 1.000 and 1.503 (still bad) 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:40:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.812 and 1.123 2008-Apr-27 02:40:20 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Apr-27 02:40:20 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Apr-27 02:40:20 WARNING abort_task: WARNING abort requested! 2008-Apr-27 02:40:20 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Apr-27 02:40:20 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Apr-27 02:40:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Apr-27 02:40:20 LOG5 end_task: Level: (3) ID = <10233> Status = 1 0 0 0 abort 2008-Apr-27 02:40:20 START begin_task: Starting task 'stopping the WAPPs' 2008-Apr-27 02:40:20 LOG5 begin_task: Level: (3) ID = <10234> Status = 1 0 0 0 abort 2008-Apr-27 02:40:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Apr-27 02:40:20 INFO1 stop_wapp: Stopping the WAPPs 2008-Apr-27 02:40:20 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Apr-27 02:40:20 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Apr-27 02:40:20 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Apr-27 02:40:20 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Apr-27 02:40:20 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Apr-27 02:40:20 LOG5 begin_task: Level: (4) ID = <10235> Status = 1 0 0 0 abort 2008-Apr-27 02:40:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Apr-27 02:40:22 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Apr-27 02:40:22 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Apr-27 02:40:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:40:22 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Apr-27 02:40:22 LOG5 end_task: Level: (4) ID = <10235> Status = 1 0 0 0 abort 2008-Apr-27 02:40:22 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Apr-27 02:40:22 LOG5 end_task: Level: (3) ID = <10234> Status = 1 0 0 0 abort 2008-Apr-27 02:40:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Apr-27 02:40:22 LOG5 end_task: Level: (2) ID = <10232> Status = 1 0 0 0 abort 2008-Apr-27 02:40:22 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-27 02:40:22 LOG5 finish_task: Level: (1) ID = <10030> Status = 1 0 0 0 abort 2008-Apr-27 02:40:22 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Apr-27 02:40:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Apr-27 02:40:22 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Apr-27 02:40:22 LOG5 end_task: Level: (1) ID = <10030> Status = 1 0 0 0 abort 2008-Apr-27 02:40:25 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-27 02:40:25 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-27 02:40:25 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-27 02:40:25 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-27 02:40:25 LOG5 begin_task: Level: (1) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-27 02:40:25 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-27 02:40:25 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-27 02:40:25 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-27 02:40:25 LOG5 end_task: Level: (1) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-27 02:40:25 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 02:40:25 LOG3 exec_msg: Closing socket 2008-Apr-27 02:40:25 LOG3 exec_msg: Closing socket 2008-Apr-27 02:40:26 LOG3 exec_msg: Closing socket 2008-Apr-27 02:40:26 LOG3 exec_msg: Closing socket 2008-Apr-27 02:40:28 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-27 02:40:28 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-27 02:40:29 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-27 02:40:29 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-27 02:40:44 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-Apr-27 02:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-Apr-27 02:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-Apr-27 02:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-Apr-27 02:40:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Apr-27 02:40:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-27 02:40:45 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-Apr-27 02:40:45 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-Apr-27 02:40:45 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-Apr-27 02:40:45 LOG5 begin_task: Level: (1) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-27 02:40:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-Apr-27 02:40:45 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-Apr-27 02:40:45 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-Apr-27 02:40:45 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-27 02:40:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 02:40:45 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-27 02:40:45 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-27 02:40:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-27 02:40:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-27 02:40:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 02:40:48 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-27 02:40:48 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-27 02:40:48 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-27 02:40:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-27 02:40:48 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-27 02:40:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:40:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:40:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:40:48 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-27 02:40:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:40:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:40:48 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-27 02:40:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:40:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:40:48 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-27 02:40:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-27 02:40:48 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-27 02:40:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-27 02:40:48 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-27 02:40:48 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-27 02:40:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-27 02:40:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:40:48 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-27 02:40:48 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-27 02:40:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-27 02:40:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-27 02:40:49 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-27 02:40:49 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-27 02:40:49 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-27 02:40:49 LOG5 finish_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-27 02:40:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 02:40:49 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-27 02:40:49 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-27 02:40:49 LOG5 begin_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-27 02:40:49 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-27 02:40:49 START begin_task: Starting task 'selecting calibration port' 2008-Apr-27 02:40:49 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-27 02:40:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-27 02:40:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:40:49 START begin_task: Starting task 'waiting on calport' 2008-Apr-27 02:40:49 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 02:40:49 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-27 02:40:49 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-27 02:40:49 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-27 02:40:49 LOG5 finish_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-27 02:40:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:40:49 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-27 02:40:49 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-27 02:40:49 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 02:40:50 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-27 02:40:50 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-27 02:40:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:40:50 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-27 02:40:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:40:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 02:40:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:40:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:40:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:40:50 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-27 02:40:50 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-27 02:40:50 LOG5 finish_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-27 02:40:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 02:40:50 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-27 02:40:50 LOG5 end_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-Apr-27 02:40:50 BEGIN begin_task: Starting task 'tracking current position' 2008-Apr-27 02:40:50 LOG5 begin_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Apr-27 02:40:50 INFO1 execute_trackcurpos: Starting to track the current commanded position RA = 16:35:51.4 and Dec = +01:34:53.6 2008-Apr-27 02:40:50 LOG3 track_source: Calling 'track_source Cur-pos 163551.4 013453.6 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-27 02:40:50 START begin_task: Starting task 'sending tracking commands' 2008-Apr-27 02:40:50 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Apr-27 02:40:50 INFO1 track_source: Starting to track Cur-pos 2008-Apr-27 02:40:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-27 02:40:50 LOG3 vw_send: To DATATAKING: set ra 163551.4 2008-Apr-27 02:40:50 LOG3 vw_send: To DATATAKING: set dec 013453.6 2008-Apr-27 02:40:50 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-27 02:40:50 LOG3 vw_send: To DATATAKING: pnt tr 163551.4 013453.6 -CJ 2008-Apr-27 02:40:50 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-27 02:40:50 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-27 02:40:50 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-27 02:40:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:40:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-27 02:40:50 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 START begin_task: Starting task 'waiting on telescope' 2008-Apr-27 02:40:50 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-27 02:40:50 LOG3 waittrk: Start waittrk 5 2008-Apr-27 02:40:50 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-27 02:40:50 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-27 02:40:50 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: set ra 163551.4 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: set dec 013453.6 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: vw% 163551.4 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: vw% 013453.6 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: pnt tr 163551.4 013453.6 -CJ 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-27 02:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:40:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-27 02:40:55 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-27 02:40:55 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-27 02:40:55 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-27 02:41:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-27 02:41:00 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-27 02:41:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-27 02:41:00 INFO2 waittrk: Now tracking Cur-pos 2008-Apr-27 02:41:00 LOG4 waittrk: Current telescope position: Az = 359.80 ZA = 16.77 2008-Apr-27 02:41:00 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-27 02:41:00 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-27 02:41:00 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-27 02:41:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:41:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-27 02:41:00 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-27 02:41:00 STOP finish_task: Finishing task 'tracking current position' 2008-Apr-27 02:41:00 LOG5 finish_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-27 02:41:00 DONE finish_task: DONE finished tracking: current position 2008-Apr-27 02:41:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 02:41:00 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Apr-27 02:41:00 LOG5 end_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-27 02:41:00 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-27 02:41:00 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-27 02:41:00 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-27 02:41:00 LOG5 begin_task: Level: (2) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-27 02:41:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-27 02:41:00 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-27 02:41:00 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-27 02:41:00 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-27 02:41:00 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-27 02:41:00 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-27 02:41:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-27 02:41:01 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-27 02:41:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-27 02:41:01 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-27 02:41:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-27 02:41:01 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-27 02:41:01 LOG5 finish_task: Level: (2) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-27 02:41:01 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-27 02:41:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 02:41:01 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-27 02:41:01 LOG5 end_task: Level: (2) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-27 02:41:01 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Apr-27 02:41:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-27 02:41:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-27 02:41:01 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Apr-27 02:41:01 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-27 02:41:01 LOG5 begin_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-27 02:41:01 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Apr-27 02:41:02 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-27 02:41:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-27 02:41:02 START begin_task: Starting task 'selecting calibration type' 2008-Apr-27 02:41:02 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-27 02:41:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-27 02:41:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:41:02 START begin_task: Starting task 'waiting on setcal' 2008-Apr-27 02:41:02 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-27 02:41:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:41:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 02:41:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-27 02:41:02 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-27 02:41:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:41:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-27 02:41:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:41:02 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:41:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:41:02 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:41:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-27 02:41:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-27 02:41:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:41:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-27 02:41:02 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-27 02:41:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-27 02:41:02 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-27 02:41:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-27 02:41:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-27 02:41:02 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-27 02:41:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:41:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-27 02:41:02 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-27 02:41:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-27 02:41:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-27 02:41:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-27 02:41:02 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-27 02:41:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-27 02:41:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 02:41:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 02:41:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 02:41:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:41:02 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-27 02:41:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:41:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:41:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:41:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:41:02 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-27 02:41:02 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 02:41:02 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-27 02:41:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-27 02:41:02 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-27 02:41:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-27 02:41:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-27 02:41:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:41:03 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-27 02:41:03 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-27 02:41:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-27 02:41:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-27 02:41:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20080427.a2010.0016.fits 2008-Apr-27 02:41:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080427.a2010.0016.fits} 2008-Apr-27 02:41:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-27 02:41:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-27 02:41:05 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-27 02:41:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-27 02:41:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-27 02:41:05 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-27 02:41:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-27 02:41:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 02:41:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 02:41:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 02:41:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-27 02:41:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-27 02:41:05 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-27 02:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-27 02:41:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 7 dB 2008-Apr-27 02:41:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-27 02:41:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 4 dB 2008-Apr-27 02:41:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-27 02:41:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-27 02:41:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-27 02:41:06 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-27 02:41:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.904 0.794 ALFA beam 1: 0.888 0.903 2008-Apr-27 02:41:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.040 0.992 ALFA beam 3: 1.000 0.889 2008-Apr-27 02:41:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.962 1.027 ALFA beam 5: 1.020 0.936 2008-Apr-27 02:41:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.026 1.053 ALFA beam 7: 0.904 0.942 2008-Apr-27 02:41:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 02:41:06 LOG5 finish_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-27 02:41:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-27 02:41:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:41:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 02:41:06 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-27 02:41:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-27 02:41:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-27 02:41:06 LOG5 finish_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-27 02:41:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-27 02:41:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-27 02:41:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-27 02:41:06 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-27 02:41:06 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Apr-27 02:41:06 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Apr-27 02:41:06 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-27 02:41:06 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:41:06 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32337 J 2008-Apr-27 02:41:06 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:41:06 LOG2 antvel: Parameters to Doppler: Topocentric 24066 2008 118 0.0 2008-Apr-27 02:41:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:41:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-27 02:41:06 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-27 02:41:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:41:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:41:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:41:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:41:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:41:06 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-27 02:41:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:41:06 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.609677 2008.3233726899384 18.999933 2008-Apr-27 02:41:06 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111512 1.581555555555555 2008-Apr-27 02:41:06 LOG4 log_alfabeam: ALFABEAM 1 16.596490459691189 1.686359305775355 2008-Apr-27 02:41:06 LOG4 log_alfabeam: ALFABEAM 2 16.591870638180257 1.616935312966509 2008-Apr-27 02:41:06 LOG4 log_alfabeam: ALFABEAM 3 16.592968293337741 1.512065217579011 2008-Apr-27 02:41:06 LOG4 log_alfabeam: ALFABEAM 4 16.598745745672939 1.476768189441827 2008-Apr-27 02:41:06 LOG4 log_alfabeam: ALFABEAM 5 16.603374693856384 1.546602531736605 2008-Apr-27 02:41:06 LOG4 log_alfabeam: ALFABEAM 6 16.602217083387213 1.651321706166170 2008-Apr-27 02:41:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800033 2008-Apr-27 02:41:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:41:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:41:07 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-27 02:41:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:41:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:41:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24068.00 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:41:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:41:18 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-27 02:41:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:41:18 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-27 02:41:18 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Apr-27 02:41:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Apr-27 02:41:18 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-27 02:41:18 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:41:18 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32337 J 2008-Apr-27 02:41:18 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:41:18 LOG2 antvel: Parameters to Doppler: Topocentric 24078 2008 118 0.0 2008-Apr-27 02:41:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:41:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-27 02:41:18 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-27 02:41:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:41:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:41:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:41:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:41:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:41:18 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-27 02:41:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:41:18 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.613019 2008.3233730701954 18.999933 2008-Apr-27 02:41:18 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111423 1.581555555555554 2008-Apr-27 02:41:18 LOG4 log_alfabeam: ALFABEAM 1 16.596510559392570 1.686407180113506 2008-Apr-27 02:41:18 LOG4 log_alfabeam: ALFABEAM 2 16.591877444868238 1.617182615705757 2008-Apr-27 02:41:18 LOG4 log_alfabeam: ALFABEAM 3 16.592954989601786 1.512265638744015 2008-Apr-27 02:41:18 LOG4 log_alfabeam: ALFABEAM 4 16.598725650801605 1.476719711935168 2008-Apr-27 02:41:18 LOG4 log_alfabeam: ALFABEAM 5 16.603367968009231 1.546354223223402 2008-Apr-27 02:41:18 LOG4 log_alfabeam: ALFABEAM 6 16.602230441275122 1.651122867035331 2008-Apr-27 02:41:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800034 2008-Apr-27 02:41:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:41:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:41:19 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-27 02:41:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:41:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:41:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24080.00 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:41:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:41:30 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-27 02:41:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:41:30 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-27 02:41:30 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Apr-27 02:41:30 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Apr-27 02:41:30 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-27 02:41:30 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:41:30 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32337 J 2008-Apr-27 02:41:30 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:41:30 LOG2 antvel: Parameters to Doppler: Topocentric 24090 2008 118 0.0 2008-Apr-27 02:41:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:41:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-27 02:41:30 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-27 02:41:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:41:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:41:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:41:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:41:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:41:30 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-27 02:41:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:41:30 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.616362 2008.3233734504524 18.999933 2008-Apr-27 02:41:30 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111416 1.581555555555552 2008-Apr-27 02:41:30 LOG4 log_alfabeam: ALFABEAM 1 16.596530673263246 1.686454199650331 2008-Apr-27 02:41:30 LOG4 log_alfabeam: ALFABEAM 2 16.591884300594657 1.617429685109401 2008-Apr-27 02:41:30 LOG4 log_alfabeam: ALFABEAM 3 16.592941721130256 1.512466682649402 2008-Apr-27 02:41:30 LOG4 log_alfabeam: ALFABEAM 4 16.598705541521618 1.476672088741777 2008-Apr-27 02:41:30 LOG4 log_alfabeam: ALFABEAM 5 16.603361192739733 1.546106140429774 2008-Apr-27 02:41:30 LOG4 log_alfabeam: ALFABEAM 6 16.602243764551293 1.650923400638032 2008-Apr-27 02:41:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800035 2008-Apr-27 02:41:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:41:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:41:31 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-27 02:41:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:41:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:41:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24092.00 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:41:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:41:42 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-27 02:41:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:41:42 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-27 02:41:42 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Apr-27 02:41:42 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Apr-27 02:41:42 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-27 02:41:42 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:41:42 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32337 J 2008-Apr-27 02:41:42 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:41:42 LOG2 antvel: Parameters to Doppler: Topocentric 24102 2008 118 0.0 2008-Apr-27 02:41:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:41:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-27 02:41:42 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-27 02:41:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:41:42 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:41:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:41:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:41:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:41:42 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-27 02:41:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:41:42 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.619704 2008.3233738307097 18.999933 2008-Apr-27 02:41:42 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111277 1.581555555555555 2008-Apr-27 02:41:42 LOG4 log_alfabeam: ALFABEAM 1 16.596550788749767 1.686500335189666 2008-Apr-27 02:41:42 LOG4 log_alfabeam: ALFABEAM 2 16.591891201072563 1.617676367061166 2008-Apr-27 02:41:42 LOG4 log_alfabeam: ALFABEAM 3 16.592928496195405 1.512668223727487 2008-Apr-27 02:41:42 LOG4 log_alfabeam: ALFABEAM 4 16.598685430382826 1.476625349451130 2008-Apr-27 02:41:42 LOG4 log_alfabeam: ALFABEAM 5 16.603354372283658 1.545858438133119 2008-Apr-27 02:41:42 LOG4 log_alfabeam: ALFABEAM 6 16.602257044899947 1.650723431515354 2008-Apr-27 02:41:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800036 2008-Apr-27 02:41:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:41:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:41:43 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-27 02:41:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:41:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:41:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24104.00 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:41:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:41:54 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-27 02:41:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:41:54 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-27 02:41:54 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Apr-27 02:41:54 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Apr-27 02:41:54 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-27 02:41:54 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:41:54 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32337 J 2008-Apr-27 02:41:54 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:41:54 LOG2 antvel: Parameters to Doppler: Topocentric 24114 2008 118 0.0 2008-Apr-27 02:41:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:41:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-27 02:41:54 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-27 02:41:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:41:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:41:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:41:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:41:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:41:54 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-27 02:41:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:41:54 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.623046 2008.3233742109667 18.999933 2008-Apr-27 02:41:54 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111224 1.581555555555553 2008-Apr-27 02:41:54 LOG4 log_alfabeam: ALFABEAM 1 16.596570911347449 1.686545599929115 2008-Apr-27 02:41:54 LOG4 log_alfabeam: ALFABEAM 2 16.591898148156915 1.617922729237829 2008-Apr-27 02:41:54 LOG4 log_alfabeam: ALFABEAM 3 16.592915311154211 1.512870316701709 2008-Apr-27 02:41:54 LOG4 log_alfabeam: ALFABEAM 4 16.598665311890890 1.476579480717098 2008-Apr-27 02:41:54 LOG4 log_alfabeam: ALFABEAM 5 16.603347504805939 1.545611048410192 2008-Apr-27 02:41:54 LOG4 log_alfabeam: ALFABEAM 6 16.602270285977706 1.650522905334100 2008-Apr-27 02:41:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800037 2008-Apr-27 02:41:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:41:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:41:55 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-27 02:41:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:41:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:41:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:41:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24116.00 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:41:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:42:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:42:06 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-27 02:42:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:42:06 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-27 02:42:06 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Apr-27 02:42:06 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Apr-27 02:42:06 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-27 02:42:06 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:42:06 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32337 J 2008-Apr-27 02:42:06 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:42:06 LOG2 antvel: Parameters to Doppler: Topocentric 24126 2008 118 0.0 2008-Apr-27 02:42:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:42:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-27 02:42:06 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-27 02:42:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:42:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:42:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:42:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:42:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:42:06 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-27 02:42:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:42:06 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.626389 2008.3233745912237 18.999933 2008-Apr-27 02:42:06 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111249 1.581555555555550 2008-Apr-27 02:42:06 LOG4 log_alfabeam: ALFABEAM 1 16.596591046560118 1.686590006092324 2008-Apr-27 02:42:06 LOG4 log_alfabeam: ALFABEAM 2 16.591905143755099 1.618168838959934 2008-Apr-27 02:42:06 LOG4 log_alfabeam: ALFABEAM 3 16.592902162408215 1.513073016914100 2008-Apr-27 02:42:06 LOG4 log_alfabeam: ALFABEAM 4 16.598645180543372 1.476534470167387 2008-Apr-27 02:42:06 LOG4 log_alfabeam: ALFABEAM 5 16.603340588419133 1.545363903686131 2008-Apr-27 02:42:06 LOG4 log_alfabeam: ALFABEAM 6 16.602283491397575 1.650321767136846 2008-Apr-27 02:42:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800038 2008-Apr-27 02:42:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:42:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:42:07 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-27 02:42:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:42:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:42:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24128.00 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:42:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:42:18 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-27 02:42:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:42:18 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-27 02:42:18 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Apr-27 02:42:18 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Apr-27 02:42:18 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-27 02:42:18 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:42:18 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32337 J 2008-Apr-27 02:42:18 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:42:18 LOG2 antvel: Parameters to Doppler: Topocentric 24138 2008 118 0.0 2008-Apr-27 02:42:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:42:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-27 02:42:18 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-27 02:42:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:42:18 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:42:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:42:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:42:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:42:18 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-27 02:42:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:42:18 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.629731 2008.3233749714807 18.999933 2008-Apr-27 02:42:18 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111178 1.581555555555561 2008-Apr-27 02:42:18 LOG4 log_alfabeam: ALFABEAM 1 16.596611181820695 1.686633526251723 2008-Apr-27 02:42:18 LOG4 log_alfabeam: ALFABEAM 2 16.591912183485835 1.618414542764959 2008-Apr-27 02:42:18 LOG4 log_alfabeam: ALFABEAM 3 16.592889058148632 1.513276197680340 2008-Apr-27 02:42:18 LOG4 log_alfabeam: ALFABEAM 4 16.598625048904587 1.476490345623255 2008-Apr-27 02:42:18 LOG4 log_alfabeam: ALFABEAM 5 16.603333627452436 1.545117158099708 2008-Apr-27 02:42:18 LOG4 log_alfabeam: ALFABEAM 6 16.602296652930203 1.650120142592230 2008-Apr-27 02:42:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800039 2008-Apr-27 02:42:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:42:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:42:19 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-27 02:42:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:42:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:42:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24140.00 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:42:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:42:30 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-27 02:42:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:42:30 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-27 02:42:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-27 02:42:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 02:42:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 02:42:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:42:30 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-27 02:42:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:42:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 02:42:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:42:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:42:30 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-27 02:42:30 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Apr-27 02:42:30 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Apr-27 02:42:30 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-27 02:42:30 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:42:30 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:42:30 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:42:30 LOG2 antvel: Parameters to Doppler: Topocentric 24150 2008 118 0.0 2008-Apr-27 02:42:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:42:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-27 02:42:30 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-27 02:42:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:42:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:42:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:42:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:42:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:42:30 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-27 02:42:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:42:30 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.633074 2008.3233753517379 18.999933 2008-Apr-27 02:42:30 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111160 1.581555555555553 2008-Apr-27 02:42:30 LOG4 log_alfabeam: ALFABEAM 1 16.596631328657541 1.686676185658993 2008-Apr-27 02:42:30 LOG4 log_alfabeam: ALFABEAM 2 16.591919271362428 1.618659981494761 2008-Apr-27 02:42:30 LOG4 log_alfabeam: ALFABEAM 3 16.592875990855745 1.513479975134141 2008-Apr-27 02:42:30 LOG4 log_alfabeam: ALFABEAM 4 16.598604905448422 1.476447081503386 2008-Apr-27 02:42:30 LOG4 log_alfabeam: ALFABEAM 5 16.603326617936119 1.544870670243260 2008-Apr-27 02:42:30 LOG4 log_alfabeam: ALFABEAM 6 16.602309778126884 1.649917916416975 2008-Apr-27 02:42:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800040 2008-Apr-27 02:42:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:42:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:42:31 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-27 02:42:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:42:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:42:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24152.00 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.487 > 1.4)! 2008-Apr-27 02:42:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.292 1.005 1.226 1.218 2008-Apr-27 02:42:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.420 1.382 1.417 1.210 2008-Apr-27 02:42:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.374 1.449 1.474 1.271 2008-Apr-27 02:42:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.464 1.487 1.279 1.329 2008-Apr-27 02:42:36 INFO5 check_wapp_levels: WAPP power levels are between 1.004 and 1.488 (still bad) 2008-Apr-27 02:42:38 INFO5 check_wapp_levels: WAPP power levels are between 1.003 and 1.487 (still bad) 2008-Apr-27 02:42:40 INFO5 check_wapp_levels: WAPP power levels are between 1.005 and 1.486 (still bad) 2008-Apr-27 02:42:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:42:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:42:42 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-27 02:42:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:42:42 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-27 02:42:42 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Apr-27 02:42:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Apr-27 02:42:42 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-27 02:42:42 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:42:42 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:42:42 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:42:42 LOG2 antvel: Parameters to Doppler: Topocentric 24162 2008 118 0.0 2008-Apr-27 02:42:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:42:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-27 02:42:42 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-27 02:42:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:42:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:42:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:42:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:42:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:42:42 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-27 02:42:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:42:42 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.636416 2008.3233757319949 18.999933 2008-Apr-27 02:42:42 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111149 1.581555555555554 2008-Apr-27 02:42:42 LOG4 log_alfabeam: ALFABEAM 1 16.596651474496209 1.686717958068786 2008-Apr-27 02:42:42 LOG4 log_alfabeam: ALFABEAM 2 16.591926402941507 1.618905002145304 2008-Apr-27 02:42:42 LOG4 log_alfabeam: ALFABEAM 3 16.592862968666076 1.513684221866463 2008-Apr-27 02:42:42 LOG4 log_alfabeam: ALFABEAM 4 16.598584762747283 1.476404704447137 2008-Apr-27 02:42:42 LOG4 log_alfabeam: ALFABEAM 5 16.603319564262538 1.544624593807046 2008-Apr-27 02:42:42 LOG4 log_alfabeam: ALFABEAM 6 16.602322858813192 1.649715215012092 2008-Apr-27 02:42:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800041 2008-Apr-27 02:42:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:42:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:42:43 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-27 02:42:43 INFO5 check_wapp_levels: WAPP power levels are between 1.005 and 1.485 (still bad) 2008-Apr-27 02:42:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:42:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:42:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24164.00 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:45 INFO5 check_wapp_levels: WAPP power levels are between 1.007 and 1.487 (still bad) 2008-Apr-27 02:42:47 INFO5 check_wapp_levels: WAPP power levels are between 1.006 and 1.489 (still bad) 2008-Apr-27 02:42:49 INFO5 check_wapp_levels: WAPP power levels are between 1.008 and 1.489 (still bad) 2008-Apr-27 02:42:51 INFO5 check_wapp_levels: WAPP power levels are between 1.007 and 1.489 (still bad) 2008-Apr-27 02:42:53 INFO5 check_wapp_levels: WAPP power levels are between 1.007 and 1.489 (still bad) 2008-Apr-27 02:42:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:42:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:42:54 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-27 02:42:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:42:54 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-27 02:42:54 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Apr-27 02:42:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Apr-27 02:42:54 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-27 02:42:54 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:42:54 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:42:54 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:42:54 LOG2 antvel: Parameters to Doppler: Topocentric 24174 2008 118 0.0 2008-Apr-27 02:42:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:42:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-27 02:42:54 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-27 02:42:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:42:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:42:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:42:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:42:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:42:54 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-27 02:42:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:42:54 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.639759 2008.3233761122519 18.999933 2008-Apr-27 02:42:54 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111124 1.581555555555556 2008-Apr-27 02:42:54 LOG4 log_alfabeam: ALFABEAM 1 16.596671630870851 1.686758867824161 2008-Apr-27 02:42:54 LOG4 log_alfabeam: ALFABEAM 2 16.591933582284280 1.619149745208259 2008-Apr-27 02:42:54 LOG4 log_alfabeam: ALFABEAM 3 16.592849984101658 1.513889054570177 2008-Apr-27 02:42:54 LOG4 log_alfabeam: ALFABEAM 4 16.598564609268596 1.476363189781660 2008-Apr-27 02:42:54 LOG4 log_alfabeam: ALFABEAM 5 16.603312462412998 1.544378787726632 2008-Apr-27 02:42:54 LOG4 log_alfabeam: ALFABEAM 6 16.602335902498286 1.649511922529913 2008-Apr-27 02:42:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800042 2008-Apr-27 02:42:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:42:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:42:55 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-27 02:42:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:42:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:42:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:42:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:42:55 INFO5 check_wapp_levels: WAPP power levels are between 1.007 and 1.490 (still bad) 2008-Apr-27 02:42:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24176.00 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:42:57 INFO5 check_wapp_levels: WAPP power levels are between 1.005 and 1.488 (still bad) 2008-Apr-27 02:42:59 INFO5 check_wapp_levels: WAPP power levels are between 1.005 and 1.487 (still bad) 2008-Apr-27 02:43:01 INFO5 check_wapp_levels: WAPP power levels are between 1.004 and 1.488 (still bad) 2008-Apr-27 02:43:03 INFO5 check_wapp_levels: WAPP power levels are between 1.004 and 1.489 (still bad) 2008-Apr-27 02:43:05 INFO5 check_wapp_levels: WAPP power levels are between 1.006 and 1.489 (still bad) 2008-Apr-27 02:43:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:43:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:43:06 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-27 02:43:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:43:06 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-27 02:43:06 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Apr-27 02:43:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Apr-27 02:43:06 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-27 02:43:06 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:43:06 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:43:06 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:43:06 LOG2 antvel: Parameters to Doppler: Topocentric 24186 2008 118 0.0 2008-Apr-27 02:43:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:43:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-27 02:43:06 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-27 02:43:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:43:06 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:43:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:43:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:43:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:43:06 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-27 02:43:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:43:06 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.643101 2008.3233764925089 18.999933 2008-Apr-27 02:43:06 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111188 1.581555555555559 2008-Apr-27 02:43:06 LOG4 log_alfabeam: ALFABEAM 1 16.596691785201241 1.686798889863802 2008-Apr-27 02:43:06 LOG4 log_alfabeam: ALFABEAM 2 16.591940804885763 1.619394058155806 2008-Apr-27 02:43:06 LOG4 log_alfabeam: ALFABEAM 3 16.592837045242938 1.514094345127502 2008-Apr-27 02:43:06 LOG4 log_alfabeam: ALFABEAM 4 16.598544457591117 1.476322562962279 2008-Apr-27 02:43:06 LOG4 log_alfabeam: ALFABEAM 5 16.603305316842654 1.544133405225591 2008-Apr-27 02:43:06 LOG4 log_alfabeam: ALFABEAM 6 16.602348901063348 1.649308166087903 2008-Apr-27 02:43:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800043 2008-Apr-27 02:43:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:43:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:43:07 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-27 02:43:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:43:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:43:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24188.00 2008-Apr-27 02:43:08 INFO5 check_wapp_levels: WAPP power levels are between 1.005 and 1.488 (still bad) 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:10 INFO5 check_wapp_levels: WAPP power levels are between 1.003 and 1.487 (still bad) 2008-Apr-27 02:43:12 INFO5 check_wapp_levels: WAPP power levels are between 1.002 and 1.487 (still bad) 2008-Apr-27 02:43:14 INFO5 check_wapp_levels: WAPP power levels are between 1.002 and 1.486 (still bad) 2008-Apr-27 02:43:16 INFO5 check_wapp_levels: WAPP power levels are between 1.003 and 1.487 (still bad) 2008-Apr-27 02:43:18 INFO5 check_wapp_levels: WAPP power levels are between 1.001 and 1.486 (still bad) 2008-Apr-27 02:43:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:43:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:43:18 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-27 02:43:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:43:18 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-27 02:43:18 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Apr-27 02:43:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Apr-27 02:43:18 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-27 02:43:18 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:43:18 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:43:18 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:43:18 LOG2 antvel: Parameters to Doppler: Topocentric 24198 2008 118 0.0 2008-Apr-27 02:43:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:43:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-27 02:43:18 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-27 02:43:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:43:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:43:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:43:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:43:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:43:18 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-27 02:43:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:43:18 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.646444 2008.3233768727659 18.999933 2008-Apr-27 02:43:18 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111085 1.581555555555555 2008-Apr-27 02:43:18 LOG4 log_alfabeam: ALFABEAM 1 16.596711949026329 1.686838047620792 2008-Apr-27 02:43:18 LOG4 log_alfabeam: ALFABEAM 2 16.591948074854503 1.619638081117824 2008-Apr-27 02:43:18 LOG4 log_alfabeam: ALFABEAM 3 16.592824144655051 1.514300210780307 2008-Apr-27 02:43:18 LOG4 log_alfabeam: ALFABEAM 4 16.598524296177111 1.476282800226125 2008-Apr-27 02:43:18 LOG4 log_alfabeam: ALFABEAM 5 16.603298123484524 1.543888305594519 2008-Apr-27 02:43:18 LOG4 log_alfabeam: ALFABEAM 6 16.602361861975066 1.649103829284087 2008-Apr-27 02:43:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800044 2008-Apr-27 02:43:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:43:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:43:19 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-27 02:43:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:43:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:43:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24200.00 2008-Apr-27 02:43:20 INFO5 check_wapp_levels: WAPP power levels are between 1.002 and 1.486 (still bad) 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.997 and 1.481 (still bad) 2008-Apr-27 02:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.996 and 1.481 (still bad) 2008-Apr-27 02:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.997 and 1.481 (still bad) 2008-Apr-27 02:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.995 and 1.482 (still bad) 2008-Apr-27 02:43:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:43:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:43:30 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-27 02:43:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:43:30 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-27 02:43:30 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Apr-27 02:43:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Apr-27 02:43:30 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-27 02:43:30 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:43:30 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:43:30 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:43:30 LOG2 antvel: Parameters to Doppler: Topocentric 24210 2008 118 0.0 2008-Apr-27 02:43:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:43:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-27 02:43:30 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-27 02:43:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:43:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:43:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:43:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:43:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:43:30 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-27 02:43:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:43:30 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.649786 2008.3233772530232 18.999933 2008-Apr-27 02:43:30 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111132 1.581555555555556 2008-Apr-27 02:43:30 LOG4 log_alfabeam: ALFABEAM 1 16.596732109761572 1.686876317219306 2008-Apr-27 02:43:30 LOG4 log_alfabeam: ALFABEAM 2 16.591955387624729 1.619881662060407 2008-Apr-27 02:43:30 LOG4 log_alfabeam: ALFABEAM 3 16.592811290361226 1.514506522718473 2008-Apr-27 02:43:30 LOG4 log_alfabeam: ALFABEAM 4 16.598504137610167 1.476243925842979 2008-Apr-27 02:43:30 LOG4 log_alfabeam: ALFABEAM 5 16.603290886855490 1.543643641572477 2008-Apr-27 02:43:30 LOG4 log_alfabeam: ALFABEAM 6 16.602374777171136 1.648899039936283 2008-Apr-27 02:43:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800045 2008-Apr-27 02:43:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:43:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:43:31 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-27 02:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.996 and 1.481 (still bad) 2008-Apr-27 02:43:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:43:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:43:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24212.00 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.995 and 1.480 (still bad) 2008-Apr-27 02:43:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.480 > 1.4)! 2008-Apr-27 02:43:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.254 0.995 1.178 1.198 2008-Apr-27 02:43:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.399 1.339 1.350 1.184 2008-Apr-27 02:43:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.325 1.420 1.376 1.228 2008-Apr-27 02:43:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.448 1.480 1.265 1.324 2008-Apr-27 02:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.480 (still bad) 2008-Apr-27 02:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.481 (still bad) 2008-Apr-27 02:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.481 (still bad) 2008-Apr-27 02:43:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:43:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:43:42 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-27 02:43:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:43:42 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-27 02:43:42 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Apr-27 02:43:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Apr-27 02:43:42 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-27 02:43:42 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:43:42 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:43:42 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:43:42 LOG2 antvel: Parameters to Doppler: Topocentric 24222 2008 118 0.0 2008-Apr-27 02:43:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:43:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-27 02:43:42 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-27 02:43:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:43:42 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:43:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:43:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:43:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:43:42 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-27 02:43:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:43:42 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.653129 2008.3233776332802 18.999933 2008-Apr-27 02:43:42 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111135 1.581555555555553 2008-Apr-27 02:43:42 LOG4 log_alfabeam: ALFABEAM 1 16.596752278949882 1.686913721181133 2008-Apr-27 02:43:42 LOG4 log_alfabeam: ALFABEAM 2 16.591962747352230 1.620124940739985 2008-Apr-27 02:43:42 LOG4 log_alfabeam: ALFABEAM 3 16.592798474970444 1.514713398722284 2008-Apr-27 02:43:42 LOG4 log_alfabeam: ALFABEAM 4 16.598483970348401 1.476205916961147 2008-Apr-27 02:43:42 LOG4 log_alfabeam: ALFABEAM 5 16.603283602841152 1.543399272816657 2008-Apr-27 02:43:42 LOG4 log_alfabeam: ALFABEAM 6 16.602387654075059 1.648693681098476 2008-Apr-27 02:43:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800046 2008-Apr-27 02:43:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:43:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:43:43 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-27 02:43:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:43:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:43:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.479 (still bad) 2008-Apr-27 02:43:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24224.00 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.479 (still bad) 2008-Apr-27 02:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.479 (still bad) 2008-Apr-27 02:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.993 and 1.479 (still bad) 2008-Apr-27 02:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.481 (still bad) 2008-Apr-27 02:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 1.481 (still bad) 2008-Apr-27 02:43:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:43:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:43:54 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-27 02:43:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:43:54 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-27 02:43:54 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-27 02:43:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-27 02:43:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-27 02:43:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 02:43:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 02:43:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:43:54 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-27 02:43:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:43:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:43:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:43:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:43:54 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-27 02:43:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-27 02:43:54 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Apr-27 02:43:54 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Apr-27 02:43:54 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-27 02:43:54 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:43:54 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:43:54 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:43:54 LOG2 antvel: Parameters to Doppler: Topocentric 24234 2008 118 0.0 2008-Apr-27 02:43:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:43:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-27 02:43:54 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-27 02:43:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:43:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:43:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:43:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:43:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:43:54 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-27 02:43:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:43:54 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.656471 2008.3233780135372 18.999933 2008-Apr-27 02:43:54 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111128 1.581555555555554 2008-Apr-27 02:43:54 LOG4 log_alfabeam: ALFABEAM 1 16.596772444003452 1.686950236817056 2008-Apr-27 02:43:54 LOG4 log_alfabeam: ALFABEAM 2 16.591970149410550 1.620367765634124 2008-Apr-27 02:43:54 LOG4 log_alfabeam: ALFABEAM 3 16.592785706447643 1.514920709306044 2008-Apr-27 02:43:54 LOG4 log_alfabeam: ALFABEAM 4 16.598463806978685 1.476168796663796 2008-Apr-27 02:43:54 LOG4 log_alfabeam: ALFABEAM 5 16.603276276019173 1.543155351564037 2008-Apr-27 02:43:54 LOG4 log_alfabeam: ALFABEAM 6 16.602400484681471 1.648487881272487 2008-Apr-27 02:43:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800047 2008-Apr-27 02:43:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:43:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:43:55 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-27 02:43:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:43:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:43:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:43:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:43:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24236.00 2008-Apr-27 02:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.990 and 1.482 (still bad) 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.990 and 1.482 (still bad) 2008-Apr-27 02:43:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.816 and 1.085 2008-Apr-27 02:44:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:44:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:44:06 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-27 02:44:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:44:06 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-27 02:44:06 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Apr-27 02:44:06 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Apr-27 02:44:06 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-27 02:44:06 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:44:06 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:44:06 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:44:06 LOG2 antvel: Parameters to Doppler: Topocentric 24246 2008 118 0.0 2008-Apr-27 02:44:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:44:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-27 02:44:06 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-27 02:44:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:44:06 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:44:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:44:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:44:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:44:06 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-27 02:44:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:44:06 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.659814 2008.3233783937942 18.999933 2008-Apr-27 02:44:06 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111135 1.581555555555551 2008-Apr-27 02:44:06 LOG4 log_alfabeam: ALFABEAM 1 16.596792616468520 1.686985885736538 2008-Apr-27 02:44:06 LOG4 log_alfabeam: ALFABEAM 2 16.591977598002416 1.620610276114385 2008-Apr-27 02:44:06 LOG4 log_alfabeam: ALFABEAM 3 16.592772977445957 1.515128572777905 2008-Apr-27 02:44:06 LOG4 log_alfabeam: ALFABEAM 4 16.598443635955693 1.476132543011553 2008-Apr-27 02:44:06 LOG4 log_alfabeam: ALFABEAM 5 16.603268902227995 1.542911737849925 2008-Apr-27 02:44:06 LOG4 log_alfabeam: ALFABEAM 6 16.602413276370601 1.648281522978665 2008-Apr-27 02:44:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800048 2008-Apr-27 02:44:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:44:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:44:07 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-27 02:44:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:44:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:44:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24248.00 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:44:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:44:18 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-27 02:44:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:44:18 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-27 02:44:18 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Apr-27 02:44:18 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Apr-27 02:44:18 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-27 02:44:18 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:44:18 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:44:18 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:44:18 LOG2 antvel: Parameters to Doppler: Topocentric 24258 2008 118 0.0 2008-Apr-27 02:44:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:44:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-27 02:44:18 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-27 02:44:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:44:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:44:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:44:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:44:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:44:18 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-27 02:44:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:44:18 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.663156 2008.3233787740512 18.999933 2008-Apr-27 02:44:18 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111139 1.581555555555552 2008-Apr-27 02:44:18 LOG4 log_alfabeam: ALFABEAM 1 16.596812783755830 1.687020646437524 2008-Apr-27 02:44:18 LOG4 log_alfabeam: ALFABEAM 2 16.591985088441582 1.620852321186916 2008-Apr-27 02:44:18 LOG4 log_alfabeam: ALFABEAM 3 16.592760295871546 1.515336858993337 2008-Apr-27 02:44:18 LOG4 log_alfabeam: ALFABEAM 4 16.598423469868127 1.476097177900189 2008-Apr-27 02:44:18 LOG4 log_alfabeam: ALFABEAM 5 16.603261486105584 1.542668583391841 2008-Apr-27 02:44:18 LOG4 log_alfabeam: ALFABEAM 6 16.602426021194994 1.648074735386244 2008-Apr-27 02:44:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800049 2008-Apr-27 02:44:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:44:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:44:19 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-27 02:44:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:44:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:44:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24260.00 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:44:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:44:30 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-27 02:44:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:44:30 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-27 02:44:30 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Apr-27 02:44:30 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Apr-27 02:44:30 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-27 02:44:30 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:44:30 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:44:30 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:44:30 LOG2 antvel: Parameters to Doppler: Topocentric 24270 2008 118 0.0 2008-Apr-27 02:44:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:44:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-27 02:44:30 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-27 02:44:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:44:30 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:44:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:44:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:44:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:44:30 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-27 02:44:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:44:30 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.666498 2008.3233791543084 18.999933 2008-Apr-27 02:44:30 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111139 1.581555555555557 2008-Apr-27 02:44:30 LOG4 log_alfabeam: ALFABEAM 1 16.596832951379014 1.687054529609026 2008-Apr-27 02:44:30 LOG4 log_alfabeam: ALFABEAM 2 16.591992622716379 1.621093967581412 2008-Apr-27 02:44:30 LOG4 log_alfabeam: ALFABEAM 3 16.592747658197336 1.515545624239497 2008-Apr-27 02:44:30 LOG4 log_alfabeam: ALFABEAM 4 16.598403303202904 1.476062690491629 2008-Apr-27 02:44:30 LOG4 log_alfabeam: ALFABEAM 5 16.603254025682702 1.542425821195169 2008-Apr-27 02:44:30 LOG4 log_alfabeam: ALFABEAM 6 16.602438722696782 1.647867462585051 2008-Apr-27 02:44:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800050 2008-Apr-27 02:44:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:44:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:44:31 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-27 02:44:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:44:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:44:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24272.00 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:44:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:44:42 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-27 02:44:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:44:42 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-27 02:44:42 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Apr-27 02:44:42 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Apr-27 02:44:42 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-27 02:44:42 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:44:42 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:44:42 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:44:42 LOG2 antvel: Parameters to Doppler: Topocentric 24282 2008 118 0.0 2008-Apr-27 02:44:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:44:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-27 02:44:42 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-27 02:44:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:44:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:44:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:44:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:44:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:44:42 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-27 02:44:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:44:42 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.669841 2008.3233795345654 18.999933 2008-Apr-27 02:44:42 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111107 1.581555555555552 2008-Apr-27 02:44:42 LOG4 log_alfabeam: ALFABEAM 1 16.596853124852579 1.687087544958077 2008-Apr-27 02:44:42 LOG4 log_alfabeam: ALFABEAM 2 16.592000202864238 1.621335281586656 2008-Apr-27 02:44:42 LOG4 log_alfabeam: ALFABEAM 3 16.592735060944925 1.515754925344850 2008-Apr-27 02:44:42 LOG4 log_alfabeam: ALFABEAM 4 16.598383130445786 1.476029070929928 2008-Apr-27 02:44:42 LOG4 log_alfabeam: ALFABEAM 5 16.603246518939997 1.542183384699176 2008-Apr-27 02:44:42 LOG4 log_alfabeam: ALFABEAM 6 16.602451384369488 1.647659648117016 2008-Apr-27 02:44:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800051 2008-Apr-27 02:44:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:44:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:44:43 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-27 02:44:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:44:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:44:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24284.00 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:44:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:44:54 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-27 02:44:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:44:54 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-27 02:44:54 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Apr-27 02:44:54 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Apr-27 02:44:54 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-27 02:44:54 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:44:54 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:44:54 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:44:54 LOG2 antvel: Parameters to Doppler: Topocentric 24294 2008 118 0.0 2008-Apr-27 02:44:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:44:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-27 02:44:54 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-27 02:44:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:44:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:44:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:44:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:44:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:44:54 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-27 02:44:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:44:54 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.673183 2008.3233799148225 18.999933 2008-Apr-27 02:44:54 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111132 1.581555555555558 2008-Apr-27 02:44:54 LOG4 log_alfabeam: ALFABEAM 1 16.596873291587897 1.687119672763409 2008-Apr-27 02:44:54 LOG4 log_alfabeam: ALFABEAM 2 16.592007824110620 1.621576113033443 2008-Apr-27 02:44:54 LOG4 log_alfabeam: ALFABEAM 3 16.592722511930720 1.515964631208629 2008-Apr-27 02:44:54 LOG4 log_alfabeam: ALFABEAM 4 16.598362964185263 1.475996339329585 2008-Apr-27 02:44:54 LOG4 log_alfabeam: ALFABEAM 5 16.603238970604984 1.541941424809979 2008-Apr-27 02:44:54 LOG4 log_alfabeam: ALFABEAM 6 16.602463998354537 1.647451422120859 2008-Apr-27 02:44:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800052 2008-Apr-27 02:44:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:44:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:44:55 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-27 02:44:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:44:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:44:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:44:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24296.00 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:45:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:45:06 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-27 02:45:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:45:06 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-27 02:45:06 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Apr-27 02:45:06 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Apr-27 02:45:06 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-27 02:45:06 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:45:06 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:45:06 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:45:06 LOG2 antvel: Parameters to Doppler: Topocentric 24306 2008 118 0.0 2008-Apr-27 02:45:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:45:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-27 02:45:06 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-27 02:45:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:45:06 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:45:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:45:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-27 02:45:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:45:06 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-27 02:45:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:45:06 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.676526 2008.3233802950795 18.999933 2008-Apr-27 02:45:06 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111135 1.581555555555556 2008-Apr-27 02:45:06 LOG4 log_alfabeam: ALFABEAM 1 16.596893463134478 1.687150932350589 2008-Apr-27 02:45:06 LOG4 log_alfabeam: ALFABEAM 2 16.592015490773473 1.621816600281832 2008-Apr-27 02:45:06 LOG4 log_alfabeam: ALFABEAM 3 16.592710003920818 1.516174861412049 2008-Apr-27 02:45:06 LOG4 log_alfabeam: ALFABEAM 4 16.598342792872344 1.475964476035360 2008-Apr-27 02:45:06 LOG4 log_alfabeam: ALFABEAM 5 16.603231376399656 1.541699802558077 2008-Apr-27 02:45:06 LOG4 log_alfabeam: ALFABEAM 6 16.602476571920480 1.647242665828966 2008-Apr-27 02:45:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800053 2008-Apr-27 02:45:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:45:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:45:07 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-27 02:45:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:45:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:45:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24308.00 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:45:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:45:18 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-27 02:45:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:45:18 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-27 02:45:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-27 02:45:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-27 02:45:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-27 02:45:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:45:18 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-27 02:45:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:45:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-27 02:45:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:45:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:45:18 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-27 02:45:18 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Apr-27 02:45:18 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Apr-27 02:45:18 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-27 02:45:18 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:45:18 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:45:18 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:45:18 LOG2 antvel: Parameters to Doppler: Topocentric 24318 2008 118 0.0 2008-Apr-27 02:45:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:45:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-27 02:45:18 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-27 02:45:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:45:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:45:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:45:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:45:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:45:18 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-27 02:45:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:45:18 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.679868 2008.3233806753365 18.999933 2008-Apr-27 02:45:18 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111117 1.581555555555557 2008-Apr-27 02:45:18 LOG4 log_alfabeam: ALFABEAM 1 16.596913626905941 1.687181305184928 2008-Apr-27 02:45:18 LOG4 log_alfabeam: ALFABEAM 2 16.592023198020243 1.622056593733209 2008-Apr-27 02:45:18 LOG4 log_alfabeam: ALFABEAM 3 16.592697544670539 1.516385484238336 2008-Apr-27 02:45:18 LOG4 log_alfabeam: ALFABEAM 4 16.598322629093399 1.475933499974731 2008-Apr-27 02:45:18 LOG4 log_alfabeam: ALFABEAM 5 16.603223741110039 1.541458668287563 2008-Apr-27 02:45:18 LOG4 log_alfabeam: ALFABEAM 6 16.602489097268787 1.647033510005165 2008-Apr-27 02:45:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800054 2008-Apr-27 02:45:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:45:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:45:19 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-27 02:45:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:45:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-27 02:45:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24320.00 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.487 > 1.4)! 2008-Apr-27 02:45:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.805 0.882 0.896 2008-Apr-27 02:45:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.982 0.987 0.882 2008-Apr-27 02:45:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.370 1.443 1.474 1.267 2008-Apr-27 02:45:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.459 1.487 1.278 1.329 2008-Apr-27 02:45:23 INFO5 check_wapp_levels: WAPP power levels are between 1.002 and 1.488 (still bad) 2008-Apr-27 02:45:25 INFO5 check_wapp_levels: WAPP power levels are between 1.001 and 1.487 (still bad) 2008-Apr-27 02:45:27 INFO5 check_wapp_levels: WAPP power levels are between 1.001 and 1.489 (still bad) 2008-Apr-27 02:45:29 INFO5 check_wapp_levels: WAPP power levels are between 1.002 and 1.488 (still bad) 2008-Apr-27 02:45:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:45:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:45:30 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-27 02:45:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:45:30 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-27 02:45:30 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Apr-27 02:45:30 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Apr-27 02:45:30 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-27 02:45:30 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:45:30 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:45:30 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:45:30 LOG2 antvel: Parameters to Doppler: Topocentric 24330 2008 118 0.0 2008-Apr-27 02:45:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:45:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-27 02:45:30 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-27 02:45:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:45:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:45:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:45:30 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-27 02:45:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:45:30 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.683211 2008.3233810555937 18.999933 2008-Apr-27 02:45:30 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111139 1.581555555555555 2008-Apr-27 02:45:30 LOG4 log_alfabeam: ALFABEAM 1 16.596933794451424 1.687210809677795 2008-Apr-27 02:45:30 LOG4 log_alfabeam: ALFABEAM 2 16.592030950214308 1.622296231323533 2008-Apr-27 02:45:30 LOG4 log_alfabeam: ALFABEAM 3 16.592685126992361 1.516596619759015 2008-Apr-27 02:45:30 LOG4 log_alfabeam: ALFABEAM 4 16.598302461299774 1.475903392406887 2008-Apr-27 02:45:30 LOG4 log_alfabeam: ALFABEAM 5 16.603216060412631 1.541217883446775 2008-Apr-27 02:45:30 LOG4 log_alfabeam: ALFABEAM 6 16.602501581622594 1.646823835385434 2008-Apr-27 02:45:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800055 2008-Apr-27 02:45:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:45:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:45:31 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-27 02:45:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:45:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-27 02:45:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24332.00 2008-Apr-27 02:45:32 INFO5 check_wapp_levels: WAPP power levels are between 1.004 and 1.487 (still bad) 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:34 INFO5 check_wapp_levels: WAPP power levels are between 1.003 and 1.489 (still bad) 2008-Apr-27 02:45:36 INFO5 check_wapp_levels: WAPP power levels are between 1.006 and 1.492 (still bad) 2008-Apr-27 02:45:38 INFO5 check_wapp_levels: WAPP power levels are between 1.001 and 1.490 (still bad) 2008-Apr-27 02:45:40 INFO5 check_wapp_levels: WAPP power levels are between 1.001 and 1.492 (still bad) 2008-Apr-27 02:45:42 INFO5 check_wapp_levels: WAPP power levels are between 1.004 and 1.491 (still bad) 2008-Apr-27 02:45:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:45:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:45:42 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-27 02:45:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:45:42 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-27 02:45:42 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Apr-27 02:45:42 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Apr-27 02:45:42 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-27 02:45:42 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:45:42 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:45:42 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:45:42 LOG2 antvel: Parameters to Doppler: Topocentric 24342 2008 118 0.0 2008-Apr-27 02:45:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:45:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-27 02:45:42 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-27 02:45:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:45:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:45:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:45:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:45:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:45:42 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-27 02:45:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:45:42 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.686553 2008.3233814358507 18.999933 2008-Apr-27 02:45:42 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111128 1.581555555555556 2008-Apr-27 02:45:42 LOG4 log_alfabeam: ALFABEAM 1 16.596953953188418 1.687239428480203 2008-Apr-27 02:45:42 LOG4 log_alfabeam: ALFABEAM 2 16.592038742465746 1.622535364041199 2008-Apr-27 02:45:42 LOG4 log_alfabeam: ALFABEAM 3 16.592672758579841 1.516808135658943 2008-Apr-27 02:45:42 LOG4 log_alfabeam: ALFABEAM 4 16.598282302074200 1.475874171073066 2008-Apr-27 02:45:42 LOG4 log_alfabeam: ALFABEAM 5 16.603208339151177 1.540977597801201 2008-Apr-27 02:45:42 LOG4 log_alfabeam: ALFABEAM 6 16.602514017244079 1.646613773341268 2008-Apr-27 02:45:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800056 2008-Apr-27 02:45:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:45:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:45:43 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-27 02:45:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:45:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-27 02:45:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24344.00 2008-Apr-27 02:45:44 INFO5 check_wapp_levels: WAPP power levels are between 1.003 and 1.491 (still bad) 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:46 INFO5 check_wapp_levels: WAPP power levels are between 1.002 and 1.491 (still bad) 2008-Apr-27 02:45:48 INFO5 check_wapp_levels: WAPP power levels are between 1.002 and 1.491 (still bad) 2008-Apr-27 02:45:50 INFO5 check_wapp_levels: WAPP power levels are between 1.001 and 1.489 (still bad) 2008-Apr-27 02:45:52 INFO5 check_wapp_levels: WAPP power levels are between 1.003 and 1.488 (still bad) 2008-Apr-27 02:45:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:45:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:45:54 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-27 02:45:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:45:54 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-27 02:45:54 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Apr-27 02:45:54 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Apr-27 02:45:54 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-27 02:45:54 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:45:54 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:45:54 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:45:54 LOG2 antvel: Parameters to Doppler: Topocentric 24354 2008 118 0.0 2008-Apr-27 02:45:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:45:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-27 02:45:54 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-27 02:45:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:45:54 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:45:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:45:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:45:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:45:54 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-27 02:45:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:45:54 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.689896 2008.3233818161077 18.999933 2008-Apr-27 02:45:54 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111117 1.581555555555554 2008-Apr-27 02:45:54 LOG4 log_alfabeam: ALFABEAM 1 16.596974114664501 1.687267179089106 2008-Apr-27 02:45:54 LOG4 log_alfabeam: ALFABEAM 2 16.592046579182792 1.622774129387003 2008-Apr-27 02:45:54 LOG4 log_alfabeam: ALFABEAM 3 16.592660432292032 1.517020152488808 2008-Apr-27 02:45:54 LOG4 log_alfabeam: ALFABEAM 4 16.598262139869142 1.475845818147097 2008-Apr-27 02:45:54 LOG4 log_alfabeam: ALFABEAM 5 16.603200572956823 1.540737673228033 2008-Apr-27 02:45:54 LOG4 log_alfabeam: ALFABEAM 6 16.602526411310258 1.646403204123171 2008-Apr-27 02:45:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800057 2008-Apr-27 02:45:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:45:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:45:55 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-27 02:45:55 INFO5 check_wapp_levels: WAPP power levels are between 1.005 and 1.489 (still bad) 2008-Apr-27 02:45:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:45:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-27 02:45:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:45:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24356.00 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.999 and 1.489 (still bad) 2008-Apr-27 02:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.998 and 1.487 (still bad) 2008-Apr-27 02:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.999 and 1.487 (still bad) 2008-Apr-27 02:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.997 and 1.487 (still bad) 2008-Apr-27 02:46:05 INFO5 check_wapp_levels: WAPP power levels are between 1.000 and 1.489 (still bad) 2008-Apr-27 02:46:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:46:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:46:06 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-27 02:46:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:46:06 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-27 02:46:06 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Apr-27 02:46:06 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Apr-27 02:46:06 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-27 02:46:06 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:46:06 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:46:06 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:46:06 LOG2 antvel: Parameters to Doppler: Topocentric 24366 2008 118 0.0 2008-Apr-27 02:46:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:46:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-27 02:46:06 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-27 02:46:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:46:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:46:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:46:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:46:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:46:06 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-27 02:46:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:46:06 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.693238 2008.3233821963647 18.999933 2008-Apr-27 02:46:06 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111117 1.581555555555552 2008-Apr-27 02:46:06 LOG4 log_alfabeam: ALFABEAM 1 16.596994266302698 1.687294045339792 2008-Apr-27 02:46:06 LOG4 log_alfabeam: ALFABEAM 2 16.592054455419177 1.623012378952453 2008-Apr-27 02:46:06 LOG4 log_alfabeam: ALFABEAM 3 16.592648155760280 1.517232537352767 2008-Apr-27 02:46:06 LOG4 log_alfabeam: ALFABEAM 4 16.598241987262526 1.475818350185311 2008-Apr-27 02:46:06 LOG4 log_alfabeam: ALFABEAM 5 16.603192766730590 1.540498258897845 2008-Apr-27 02:46:06 LOG4 log_alfabeam: ALFABEAM 6 16.602538756145080 1.646192259692885 2008-Apr-27 02:46:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800058 2008-Apr-27 02:46:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:46:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:46:07 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-27 02:46:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:46:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-27 02:46:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.999 and 1.489 (still bad) 2008-Apr-27 02:46:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24368.00 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.991 and 1.481 (still bad) 2008-Apr-27 02:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.993 and 1.482 (still bad) 2008-Apr-27 02:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 1.483 (still bad) 2008-Apr-27 02:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.991 and 1.482 (still bad) 2008-Apr-27 02:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.993 and 1.481 (still bad) 2008-Apr-27 02:46:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:46:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:46:18 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-27 02:46:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:46:18 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-27 02:46:18 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Apr-27 02:46:18 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Apr-27 02:46:18 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-27 02:46:18 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:46:18 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:46:18 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:46:18 LOG2 antvel: Parameters to Doppler: Topocentric 24378 2008 118 0.0 2008-Apr-27 02:46:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:46:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-27 02:46:18 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-27 02:46:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:46:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:46:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:46:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:46:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:46:18 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-27 02:46:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:46:18 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.696581 2008.3233825766217 18.999933 2008-Apr-27 02:46:18 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111117 1.581555555555556 2008-Apr-27 02:46:18 LOG4 log_alfabeam: ALFABEAM 1 16.597014419648136 1.687320043815086 2008-Apr-27 02:46:18 LOG4 log_alfabeam: ALFABEAM 2 16.592062375627453 1.623250249792419 2008-Apr-27 02:46:18 LOG4 log_alfabeam: ALFABEAM 3 16.592635921890764 1.517445411269729 2008-Apr-27 02:46:18 LOG4 log_alfabeam: ALFABEAM 4 16.598221832708862 1.475791750275970 2008-Apr-27 02:46:18 LOG4 log_alfabeam: ALFABEAM 5 16.603184916058659 1.540259217127727 2008-Apr-27 02:46:18 LOG4 log_alfabeam: ALFABEAM 6 16.602551058878820 1.645980819826285 2008-Apr-27 02:46:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800059 2008-Apr-27 02:46:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:46:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:46:19 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-27 02:46:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:46:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-27 02:46:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24380.00 2008-Apr-27 02:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.482 (still bad) 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.482 > 1.4)! 2008-Apr-27 02:46:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.257 0.992 1.178 1.199 2008-Apr-27 02:46:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.400 1.341 1.349 1.184 2008-Apr-27 02:46:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.330 1.424 1.380 1.229 2008-Apr-27 02:46:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.451 1.482 1.268 1.325 2008-Apr-27 02:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.991 and 1.481 (still bad) 2008-Apr-27 02:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.991 and 1.482 (still bad) 2008-Apr-27 02:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 1.479 (still bad) 2008-Apr-27 02:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.991 and 1.481 (still bad) 2008-Apr-27 02:46:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:46:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:46:30 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-27 02:46:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:46:30 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-27 02:46:30 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Apr-27 02:46:30 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Apr-27 02:46:30 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-27 02:46:30 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:46:30 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:46:30 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:46:30 LOG2 antvel: Parameters to Doppler: Topocentric 24390 2008 118 0.0 2008-Apr-27 02:46:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:46:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-27 02:46:30 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-27 02:46:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:46:30 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:46:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-27 02:46:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-27 02:46:30 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-27 02:46:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-27 02:46:30 LOG5 log_alfabeam: Parameters: 16.597611111111107 1.5815555555555556 16.699923 2008.323382956879 18.999933 2008-Apr-27 02:46:30 LOG4 log_alfabeam: ALFABEAM 0 16.597611111111153 1.581555555555557 2008-Apr-27 02:46:30 LOG4 log_alfabeam: ALFABEAM 1 16.597034562130631 1.687345159532580 2008-Apr-27 02:46:30 LOG4 log_alfabeam: ALFABEAM 2 16.592070334805637 1.623487594117220 2008-Apr-27 02:46:30 LOG4 log_alfabeam: ALFABEAM 3 16.592623738251774 1.517658640780858 2008-Apr-27 02:46:30 LOG4 log_alfabeam: ALFABEAM 4 16.598201688779490 1.475766033792309 2008-Apr-27 02:46:30 LOG4 log_alfabeam: ALFABEAM 5 16.603177025898546 1.540020696477267 2008-Apr-27 02:46:30 LOG4 log_alfabeam: ALFABEAM 6 16.602563311897857 1.645769017057816 2008-Apr-27 02:46:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 811800060 2008-Apr-27 02:46:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-27 02:46:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-27 02:46:31 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-27 02:46:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-27 02:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-27 02:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24392.00 2008-Apr-27 02:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 1.481 (still bad) 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-27 02:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 1.477 (still bad) 2008-Apr-27 02:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 1.478 (still bad) 2008-Apr-27 02:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.991 and 1.478 (still bad) 2008-Apr-27 02:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.993 and 1.479 (still bad) 2008-Apr-27 02:46:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-27 02:46:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-27 02:46:42 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-27 02:46:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-27 02:46:42 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-27 02:46:42 INFO2 smartfreq: Switching off CAL 2008-Apr-27 02:46:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-27 02:46:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-27 02:46:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-27 02:46:42 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-27 02:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.989 and 1.480 (still bad) 2008-Apr-27 02:46:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-27 02:46:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-27 02:46:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-27 02:46:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-27 02:46:42 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Apr-27 02:46:42 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-27 02:46:42 LOG5 antvel: Calling 'antvel 163551.400000 13453.600000 J 0' 2008-Apr-27 02:46:42 LOG2 antvel: Precessing RA = 16:35:51.4 Dec = +01:34:53.6 Epoch = 2008.32338 J 2008-Apr-27 02:46:42 LOG2 antvel: Computed apparent RA = 16:36:18.4 Dec = +01:33:38.9 2008-Apr-27 02:46:42 LOG2 antvel: Parameters to Doppler: Topocentric 24402 2008 118 0.0 2008-Apr-27 02:46:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-27 02:46:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Apr-27 02:46:42 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Apr-27 02:46:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-27 02:46:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-27 02:46:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-27 02:46:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:42 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-27 02:46:42 LOG5 finish_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-27 02:46:42 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-27 02:46:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 02:46:42 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-27 02:46:42 LOG5 end_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-27 02:46:42 NOTE run_command_file: DONE with command file processing 2008-Apr-27 02:46:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-27 02:46:43 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-Apr-27 02:46:43 LOG5 finish_task: Level: (1) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-27 02:46:43 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-Apr-27 02:46:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-27 02:46:43 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-Apr-27 02:46:43 LOG5 end_task: Level: (1) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-27 02:46:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-27 02:46:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-27 02:46:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:56 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-27 02:46:56 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-27 02:46:56 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-Apr-27 02:46:56 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-Apr-27 02:46:56 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-27 02:46:56 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-27 02:46:56 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-27 02:46:56 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-27 02:46:56 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-Apr-27 02:46:56 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Apr-27 02:46:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-27 02:46:58 LOG3 exec_msg: Closing socket