2008-Apr-24 23:59:45 BEGIN executive: CIMA executive starting ... 2008-Apr-24 23:59:46 NOTE executive: STARTING NEW CIMA SESSION 2008-Apr-24 23:59:46 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-04-17 17:13 2008-Apr-24 23:59:46 INFO4 executive: This is an ON-LINE session 2008-Apr-24 23:59:46 INFO4 executive: This is a REMOTE session 2008-Apr-24 23:59:46 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Apr-24 23:59:46 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Apr-24 23:59:46 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog' 2008-Apr-24 23:59:46 LOG2 log_preferences: Currently applied preferences: 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(dailylog) = general 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(logcolours) = full 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(displayformat) = long 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(logformat) = new 2008-Apr-24 23:59:46 LOG2 log_preferences: prefs(fontsize) = 3 2008-Apr-24 23:59:46 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-24 23:59:46 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Apr-24 23:59:46 ALERT executive: CIMA executive ready 2008-Apr-24 23:59:49 NOTE frontend: CIMA frontend ready 2008-Apr-24 23:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:59:49 LOG4 got_cormsg: From DATATAKING: setup 2008-Apr-24 23:59:52 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Apr-24 23:59:52 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Apr-24 23:59:52 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-24 23:59:52 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-24 23:59:52 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-24 23:59:52 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-24 23:59:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-24 23:59:52 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-24 23:59:52 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-24 23:59:52 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-24 23:59:52 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-24 23:59:52 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-24 23:59:52 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Apr-24 23:59:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-24 23:59:52 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-24 23:59:53 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Apr-24 23:59:55 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Apr-24 23:59:55 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-24 23:59:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:11 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-25 00:00:11 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-25 00:00:11 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-25 00:00:11 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-25 00:00:11 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-25 00:00:11 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-25 00:00:11 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-25 00:00:11 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-25 00:00:11 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Apr-25 00:00:11 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-25 00:00:14 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-25 00:00:17 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-25 00:00:17 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-25 00:00:17 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-25 00:00:26 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180.conf' 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-25 00:00:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-25 00:00:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-25 00:00:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 00:00:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 00:00:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 00:00:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 00:00:29 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-25 00:00:29 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-25 00:00:29 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-25 00:00:29 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-25 00:00:29 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-25 00:00:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-25 00:00:29 INFO1 config_iflo: Selecting receiver ALFA 2008-Apr-25 00:00:29 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Apr-25 00:00:29 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Apr-25 00:00:29 START begin_task: Starting task 'selecting receiver ALFA' 2008-Apr-25 00:00:29 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-25 00:00:29 NOTE select_receiver: Starting to select receiver ALFA 2008-Apr-25 00:00:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Apr-25 00:00:29 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Apr-25 00:00:29 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Apr-25 00:00:29 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Apr-25 00:00:29 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Apr-25 00:00:29 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-25 00:00:29 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Apr-25 00:00:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:00:29 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Apr-25 00:00:29 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Apr-25 00:00:29 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Apr-25 00:00:29 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-25 00:00:29 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Apr-25 00:00:29 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Apr-25 00:00:29 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Apr-25 00:00:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Apr-25 00:00:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:00:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:00:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:00:29 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-25 00:00:29 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Apr-25 00:00:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Apr-25 00:00:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:00:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:00:30 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Apr-25 00:00:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:00:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Apr-25 00:00:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-25 00:00:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Apr-25 00:00:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-25 00:00:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-25 00:00:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-25 00:00:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-25 00:00:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-25 00:00:30 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-25 00:00:31 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-25 00:00:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:00:31 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-25 00:00:31 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Apr-25 00:00:31 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-25 00:00:31 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-25 00:00:31 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Apr-25 00:00:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-25 00:00:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:00:31 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-25 00:00:31 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Apr-25 00:00:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:45 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:00:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-25 00:00:45 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Apr-25 00:00:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-25 00:00:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-25 00:00:45 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-25 00:00:45 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-25 00:00:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:00:45 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-25 00:00:45 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Apr-25 00:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-25 00:00:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-25 00:00:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-25 00:00:46 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-25 00:00:46 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-25 00:00:46 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-25 00:00:46 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-25 00:00:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-25 00:00:46 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-25 00:00:46 START begin_task: Starting task 'selecting calibration port' 2008-Apr-25 00:00:46 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-25 00:00:46 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-25 00:00:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-25 00:00:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:00:46 START begin_task: Starting task 'waiting on calport' 2008-Apr-25 00:00:46 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-25 00:00:46 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Apr-25 00:00:46 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-25 00:00:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:00:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:00:46 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-25 00:00:46 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Apr-25 00:00:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-25 00:00:46 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-25 00:00:46 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-25 00:00:46 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-25 00:00:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:00:46 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-25 00:00:46 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-25 00:00:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-25 00:00:47 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-25 00:00:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:00:47 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-25 00:00:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:00:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:00:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 00:00:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:00:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:00:47 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Apr-25 00:00:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:00:47 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-25 00:00:47 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-25 00:00:47 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-25 00:00:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:00:47 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-25 00:00:47 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Apr-25 00:00:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:00:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-25 00:00:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-25 00:00:47 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Apr-25 00:00:47 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Apr-25 00:00:47 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-25 00:00:47 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-25 00:00:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-25 00:00:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-25 00:00:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-25 00:00:47 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-25 00:00:47 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-25 00:00:47 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-25 00:00:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:00:47 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-25 00:00:47 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2008-Apr-25 00:00:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:00:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0000.fits 2008-Apr-25 00:00:47 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080425.a2010.0000.fits} 2008-Apr-25 00:00:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 00:00:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-25 00:00:48 NOTE CIMA-load_config_file: Configuration file 'a2010_az180.conf' applied. 2008-Apr-25 00:01:20 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-25 00:01:20 LOG4 exec_msg: From OBSERVER: track_new_source drift133p1 135000.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-25 00:01:20 LOG1 track_new_source: Calling 'track_new_source drift133p1 135000.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-25 00:01:20 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-25 00:01:20 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift133p1} INFO {Selecting source 'drift133p1' ...} 2008-Apr-25 00:01:20 LOG3 track_source: Calling 'track_source drift133p1 135000.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-25 00:01:20 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 00:01:20 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift133p1} INFO {Slewing to source 'drift133p1' ...} 2008-Apr-25 00:01:20 INFO1 track_source: Starting to track drift133p1 2008-Apr-25 00:01:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:01:20 LOG3 vw_send: To DATATAKING: set ra 135000.0 2008-Apr-25 00:01:20 LOG3 vw_send: To DATATAKING: set dec +321430 2008-Apr-25 00:01:20 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 00:01:20 LOG3 vw_send: To DATATAKING: pnt tr 135000.0 +321430 -CJ 2008-Apr-25 00:01:20 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:01:20 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 00:01:20 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 00:01:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:01:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 00:01:20 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-25 00:01:20 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-25 00:01:20 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-25 00:01:20 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-25 00:01:20 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-25 00:01:20 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-25 00:01:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:01:20 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-25 00:01:20 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-25 00:01:20 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 DONE finish_task: DONE finished selecting: new source 2008-Apr-25 00:01:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:01:20 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-25 00:01:20 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: set ra 135000.0 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: set dec +321430 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: vw% 135000.0 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: vw% +321430 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: pnt tr 135000.0 +321430 -CJ 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-25 00:01:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:03:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-25 00:03:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-25 00:03:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-25 00:03:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-25 00:03:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-25 00:03:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-25 00:03:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-25 00:04:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 00:04:01 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-25 00:04:01 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-25 00:04:01 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-25 00:04:01 LOG5 begin_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-25 00:04:01 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-25 00:04:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-25 00:04:01 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-25 00:04:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:04:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:04:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:04:01 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-25 00:04:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:04:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:04:01 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Apr-25 00:04:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:04:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:04:01 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-25 00:04:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-25 00:04:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-25 00:04:01 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-25 00:04:01 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-25 00:04:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-25 00:04:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:04:01 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-25 00:04:01 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-25 00:04:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:04:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:04:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:04:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:04:01 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-25 00:04:01 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-25 00:04:01 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Apr-25 00:04:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-25 00:04:01 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-25 00:04:01 LOG5 finish_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-25 00:04:01 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-25 00:04:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:04:01 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-25 00:04:01 LOG5 end_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2008-Apr-25 00:04:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-25 00:04:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 00:04:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 00:04:08 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-25 00:04:08 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-25 00:04:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-25 00:04:08 LOG5 begin_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-25 00:04:08 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-25 00:04:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-25 00:04:08 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-25 00:04:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:04:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:04:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:04:08 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-25 00:04:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:04:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:04:08 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Apr-25 00:04:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:04:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:04:08 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-25 00:04:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-25 00:04:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-25 00:04:08 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-25 00:04:08 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-25 00:04:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-25 00:04:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:04:08 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-25 00:04:08 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-25 00:04:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:04:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:04:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:04:09 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-25 00:04:09 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-25 00:04:09 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Apr-25 00:04:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-25 00:04:09 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-25 00:04:09 LOG5 finish_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-25 00:04:09 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-25 00:04:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:04:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-25 00:04:09 LOG5 end_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2008-Apr-25 00:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:04:57 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-25 00:04:57 LOG4 exec_msg: From OBSERVER: track_new_source drift133p1 135600.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-25 00:04:57 LOG1 track_new_source: Calling 'track_new_source drift133p1 135600.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-25 00:04:57 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-25 00:04:57 LOG5 begin_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift133p1} INFO {Selecting source 'drift133p1' ...} 2008-Apr-25 00:04:57 LOG3 track_source: Calling 'track_source drift133p1 135600.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-25 00:04:57 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 00:04:57 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift133p1} INFO {Slewing to source 'drift133p1' ...} 2008-Apr-25 00:04:57 INFO1 track_source: Starting to track drift133p1 2008-Apr-25 00:04:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:04:57 LOG3 vw_send: To DATATAKING: set ra 135600.0 2008-Apr-25 00:04:57 LOG3 vw_send: To DATATAKING: set dec +321430 2008-Apr-25 00:04:57 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 00:04:57 LOG3 vw_send: To DATATAKING: pnt tr 135600.0 +321430 -CJ 2008-Apr-25 00:04:57 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:04:57 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 00:04:57 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 00:04:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:04:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 00:04:57 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-25 00:04:57 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-25 00:04:57 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-25 00:04:57 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-25 00:04:57 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-25 00:04:57 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-25 00:04:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:04:57 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-25 00:04:57 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-25 00:04:57 LOG5 finish_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 DONE finish_task: DONE finished selecting: new source 2008-Apr-25 00:04:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:04:57 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-25 00:04:57 LOG5 end_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: set ra 135600.0 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: set dec +321430 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: vw% 135600.0 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: vw% +321430 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: pnt tr 135600.0 +321430 -CJ 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-25 00:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:12 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Apr-25 00:08:12 LOG4 exec_msg: From OBSERVER: track_new_source drift133p1 135600.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Apr-25 00:08:12 LOG1 track_new_source: Calling 'track_new_source drift133p1 135600.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Apr-25 00:08:12 BEGIN begin_task: Starting task 'selecting new source' 2008-Apr-25 00:08:12 LOG5 begin_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift133p1} INFO {Selecting source 'drift133p1' ...} 2008-Apr-25 00:08:12 LOG3 track_source: Calling 'track_source drift133p1 135600.0 +321430 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Apr-25 00:08:12 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 00:08:12 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift133p1} INFO {Slewing to source 'drift133p1' ...} 2008-Apr-25 00:08:12 INFO1 track_source: Starting to track drift133p1 2008-Apr-25 00:08:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:08:12 LOG3 vw_send: To DATATAKING: set ra 135600.0 2008-Apr-25 00:08:12 LOG3 vw_send: To DATATAKING: set dec +321430 2008-Apr-25 00:08:12 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 00:08:12 LOG3 vw_send: To DATATAKING: pnt tr 135600.0 +321430 -CJ 2008-Apr-25 00:08:12 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:08:12 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 00:08:12 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 00:08:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:08:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 00:08:12 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Apr-25 00:08:12 START begin_task: Starting task 'applying pointing corrections' 2008-Apr-25 00:08:12 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Apr-25 00:08:12 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-25 00:08:12 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Apr-25 00:08:12 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Apr-25 00:08:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:08:12 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Apr-25 00:08:12 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 STOP finish_task: Finishing task 'selecting new source' 2008-Apr-25 00:08:12 LOG5 finish_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-25 00:08:12 DONE finish_task: DONE finished selecting: new source 2008-Apr-25 00:08:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:08:13 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Apr-25 00:08:13 LOG5 end_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: set ra 135600.0 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: set dec +321430 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: vw% 135600.0 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: vw% +321430 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: pnt tr 135600.0 +321430 -CJ 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Apr-25 00:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:17 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-25 00:08:17 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-25 00:08:17 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-25 00:08:17 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-25 00:08:17 LOG5 begin_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-25 00:08:17 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-25 00:08:17 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-25 00:08:17 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-25 00:08:17 LOG5 end_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2008-Apr-25 00:08:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-25 00:08:18 LOG3 exec_msg: Closing socket 2008-Apr-25 00:08:18 LOG3 exec_msg: Closing socket 2008-Apr-25 00:08:18 LOG3 exec_msg: Closing socket 2008-Apr-25 00:08:18 LOG3 exec_msg: Closing socket 2008-Apr-25 00:08:20 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-25 00:08:20 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-25 00:08:20 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-25 00:08:20 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-25 00:08:26 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-25 00:08:26 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-25 00:08:26 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-25 00:08:26 LOG5 begin_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-25 00:08:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-25 00:08:26 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-25 00:08:26 START begin_task: Starting task 'selecting calibration port' 2008-Apr-25 00:08:26 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-25 00:08:26 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-25 00:08:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-25 00:08:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:08:26 START begin_task: Starting task 'waiting on calport' 2008-Apr-25 00:08:26 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-25 00:08:26 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-25 00:08:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:08:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:08:26 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-25 00:08:26 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Apr-25 00:08:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-25 00:08:26 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-25 00:08:26 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-25 00:08:26 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-25 00:08:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:08:26 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-25 00:08:26 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Apr-25 00:08:26 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-25 00:08:26 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-25 00:08:26 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:08:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:08:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-25 00:08:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-25 00:08:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:08:27 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-25 00:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:08:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 00:08:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:08:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:08:27 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Apr-25 00:08:27 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-25 00:08:27 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-25 00:08:27 LOG5 finish_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-25 00:08:27 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-25 00:08:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:08:27 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-25 00:08:27 LOG5 end_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-Apr-25 00:08:27 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-25 00:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-25 00:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-25 00:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-25 00:08:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 00:08:35 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-25 00:08:35 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-25 00:08:35 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-25 00:08:35 LOG5 begin_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-25 00:08:35 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-25 00:08:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-25 00:08:35 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-25 00:08:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:08:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:08:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:08:35 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-25 00:08:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:08:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:08:35 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2008-Apr-25 00:08:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:08:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:08:35 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-25 00:08:35 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-25 00:08:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-25 00:08:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-25 00:08:35 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-25 00:08:35 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-25 00:08:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-25 00:08:36 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-25 00:08:36 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-25 00:08:36 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-25 00:08:36 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-25 00:08:36 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-25 00:08:36 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-25 00:08:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-25 00:08:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-25 00:08:36 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-25 00:08:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-25 00:08:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:08:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-25 00:08:36 LOG5 begin_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-25 00:08:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:08:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:08:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:36 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-25 00:08:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-25 00:08:36 LOG5 end_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2008-Apr-25 00:08:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-25 00:08:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-25 00:08:36 LOG5 finish_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-25 00:08:36 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-25 00:08:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:08:36 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-25 00:08:36 LOG5 end_task: Level: (1) ID = <10033> Status = 0 0 0 0 ok 2008-Apr-25 00:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:44 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Apr-25 00:08:44 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Apr-25 00:08:44 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 00:08:44 LOG5 begin_task: Level: (1) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-25 00:08:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 00:08:44 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 00:08:44 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 00:08:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 00:08:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:08:44 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 00:08:44 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-25 00:08:44 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 00:08:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:08:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:08:47 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 00:08:47 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2008-Apr-25 00:08:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 00:08:47 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 00:08:47 LOG5 begin_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-25 00:08:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 00:08:47 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:08:47 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:08:47 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:08:48 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:08:48 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 00:08:48 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-25 00:08:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 00:08:48 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 6 dB 2008-Apr-25 00:08:48 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 00:08:48 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 00:08:48 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 00:08:48 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 00:08:48 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 00:08:48 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Apr-25 00:08:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.900 0.873 ALFA beam 1: 0.886 1.102 2008-Apr-25 00:08:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.041 0.960 ALFA beam 3: 1.005 1.072 2008-Apr-25 00:08:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.908 0.946 ALFA beam 5: 0.997 0.891 2008-Apr-25 00:08:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.015 1.017 ALFA beam 7: 0.900 0.906 2008-Apr-25 00:08:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 00:08:48 LOG5 finish_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-25 00:08:48 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 00:08:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:08:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 00:08:48 LOG5 end_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Apr-25 00:08:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Apr-25 00:08:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 00:08:48 LOG5 finish_task: Level: (1) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-25 00:08:48 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 00:08:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 00:08:48 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 00:08:48 LOG5 end_task: Level: (1) ID = <10036> Status = 0 0 0 0 ok 2008-Apr-25 00:08:53 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Apr-25 00:08:53 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 drift133p1 134700.0 +321430 J 0 Topocentric velocity(optical) 2008-Apr-25 00:08:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 drift133p1 134700.0 +321430 J 0 Topocentric velocity(optical)' 2008-Apr-25 00:08:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-25 00:08:53 LOG5 begin_task: Level: (1) ID = <10040> Status = 0 0 0 0 ok 2008-Apr-25 00:08:53 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift133p1' 2008-Apr-25 00:08:53 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-25 00:08:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift133p1} 2008-Apr-25 00:08:53 INFO5 fixed_driftmap: Start: year = 2008.31760754937 RA = 13:47:24.7 Dec = +32:11:51.1 2008-Apr-25 00:08:53 NOTE fixed_driftmap: Setting ZA to 13:50:37.4 ... 2008-Apr-25 00:08:53 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 13.84 2008-Apr-25 00:08:53 LOG3 track_source: Calling 'track_source drift133p1 180.0 13.8437223749 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-25 00:08:53 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 00:08:53 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-25 00:08:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift133p1} INFO {Slewing to source 'drift133p1' ...} 2008-Apr-25 00:08:53 INFO1 track_source: Starting to track drift133p1 2008-Apr-25 00:08:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:08:53 LOG3 vw_send: To DATATAKING: set ra 180.0 2008-Apr-25 00:08:53 LOG3 vw_send: To DATATAKING: set dec 13.8437223749 2008-Apr-25 00:08:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 00:08:53 LOG3 vw_send: To DATATAKING: pnt tr 180.0 13.8437223749 -CF 2008-Apr-25 00:08:53 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:08:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 00:08:53 LOG5 finish_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-25 00:08:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 00:08:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:08:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 00:08:53 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2008-Apr-25 00:08:53 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-25 00:08:53 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-25 00:08:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-25 00:08:53 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-25 00:08:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Apr-25 00:08:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 00:08:53 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 00:08:53 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift133p1" 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: set dec 13.8437223749 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: vw% 13.8437223749 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 13.8437223749 -CF 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 00:08:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:08:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 00:08:54 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-25 00:08:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 00:08:54 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Apr-25 00:08:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 00:08:54 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-25 00:08:54 LOG5 finish_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-25 00:08:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-25 00:08:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:08:54 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-25 00:08:54 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2008-Apr-25 00:08:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 00:08:54 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-25 00:08:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 00:08:54 LOG3 waittrk: Start waittrk 5 2008-Apr-25 00:08:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 00:08:54 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-25 00:08:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 00:08:59 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Apr-25 00:08:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 00:08:59 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-25 00:09:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 00:09:05 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Apr-25 00:09:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 00:09:05 INFO2 waittrk: Now tracking drift133p1 2008-Apr-25 00:09:05 LOG4 waittrk: Current telescope position: Az = 179.71 ZA = 13.88 2008-Apr-25 00:09:05 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 00:09:05 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-25 00:09:05 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 00:09:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:09:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 00:09:06 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 00:09:06 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 00:09:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 00:09:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:09:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 00:09:06 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:09:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 00:09:06 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 00:09:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:09:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 00:09:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:09:06 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:09:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:09:06 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:09:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 00:09:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:09:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:09:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:09:06 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:09:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:09:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:09:06 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:09:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:09:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 00:09:06 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 00:09:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:09:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 00:09:06 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Apr-25 00:09:06 INFO3 dopset_later: Setting Doppler correction now 2008-Apr-25 00:09:06 LOG5 antvel: Calling 'antvel 180.000000 13.843722 F 0' 2008-Apr-25 00:09:06 LOG2 antvel: Parameters to Doppler: Topocentric 14946 2008 116 0.0 2008-Apr-25 00:09:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 00:09:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Apr-25 00:09:06 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Apr-25 00:09:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 00:09:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 00:09:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:09:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:09:06 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 00:09:06 LOG5 begin_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 00:09:06 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 00:09:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 00:09:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 00:09:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:09:06 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 00:09:06 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:09:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:09:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:09:07 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 00:09:07 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 00:09:07 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 00:09:07 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 00:09:07 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:09:07 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:09:07 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:09:07 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 00:09:07 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 00:09:07 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 00:09:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:09:07 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 0 dB --- beam 1: 8 6 dB 2008-Apr-25 00:09:07 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-25 00:09:07 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 00:09:07 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 00:09:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 00:09:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 00:09:07 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.922 1.118 ALFA beam 1: 0.890 1.106 2008-Apr-25 00:09:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.043 0.959 ALFA beam 3: 0.988 1.078 2008-Apr-25 00:09:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.926 0.972 ALFA beam 5: 0.990 1.138 2008-Apr-25 00:09:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.041 1.050 ALFA beam 7: 0.912 0.931 2008-Apr-25 00:09:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 00:09:07 LOG5 finish_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 00:09:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:09:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 00:09:07 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 00:09:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 00:09:07 LOG5 finish_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 00:09:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:09:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 00:09:07 LOG5 end_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2008-Apr-25 00:09:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:09:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:09:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:09:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:09:07 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080425.a2010.0000.fits' is empty! 2008-Apr-25 00:09:08 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 13:47:24.7 LST = 13:56:17.8 diff = -533.1 secs 2008-Apr-25 00:09:08 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Apr-25 00:09:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Apr-25 00:09:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 00:09:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 00:09:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 00:09:08 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 00:09:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:09:08 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-25 00:09:08 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 00:09:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:09:08 INFO2 take_spectra: Starting WAPP scan: 811600001 2008-Apr-25 00:09:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 00:09:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:09:08 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-25 00:09:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:09:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:09:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14949.00 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:09:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:19:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:19:09 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Apr-25 00:19:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:19:09 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Apr-25 00:19:09 LOG1 fixed_driftmap: New position: year = 2008.3176271009202 RA = 14:05:57.8 RA/Dec = 14:06:21.9 +32:11:56.6 2008-Apr-25 00:19:09 NOTE fixed_driftmap: Correcting ZA to 13:50:42.9 ... 2008-Apr-25 00:19:09 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8452448837 -CF 2008-Apr-25 00:19:09 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 00:19:09 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 00:19:09 LOG5 begin_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-25 00:19:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 00:19:09 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 00:19:09 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 00:19:09 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-25 00:19:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 00:19:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 00:19:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:19:09 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 00:19:09 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-25 00:19:09 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8452448837 -CF 2008-Apr-25 00:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:19:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 00:19:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:19:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:19:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 00:19:09 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Apr-25 00:19:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 00:19:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:19:09 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 00:19:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:19:09 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:19:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:19:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:19:10 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:19:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 00:19:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:19:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:19:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:19:10 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:19:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:19:10 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:19:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:19:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 00:19:10 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 00:19:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:19:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 00:19:10 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 00:19:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 00:19:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 00:19:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:19:10 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:19:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 00:19:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:19:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:19:10 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 00:19:10 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 00:19:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:19:10 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-25 00:19:10 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 00:19:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:19:10 INFO2 take_spectra: Starting WAPP scan: 811600002 2008-Apr-25 00:19:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 00:19:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:19:11 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-25 00:19:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:19:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15552.00 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:19:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:19:13 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Apr-25 00:19:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:19:13 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Apr-25 00:19:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 00:19:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 00:19:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 00:19:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:19:13 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-25 00:19:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:19:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 00:19:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:19:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:19:13 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Apr-25 00:19:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 00:19:13 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 00:19:13 LOG5 finish_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-25 00:19:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 00:19:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:19:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 00:19:13 LOG5 end_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Apr-25 00:19:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Apr-25 00:19:13 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-25 00:19:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:19:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:19:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:19:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:19:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 00:19:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 00:19:14 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 00:19:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:19:14 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-25 00:19:14 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 00:19:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:19:14 INFO2 take_spectra: Starting WAPP scan: 811600003 2008-Apr-25 00:19:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 00:19:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:19:14 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-25 00:19:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:19:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:19:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15555.00 2008-Apr-25 00:19:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0001.fits 2008-Apr-25 00:19:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0001.fits} 2008-Apr-25 00:19:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.524 > 1.4)! 2008-Apr-25 00:19:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.265 1.425 1.194 1.483 2008-Apr-25 00:19:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.422 1.322 1.351 1.454 2008-Apr-25 00:19:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.293 1.355 1.377 1.524 2008-Apr-25 00:19:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.452 1.460 1.273 1.296 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:19:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.139 2008-Apr-25 00:29:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:29:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:29:15 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Apr-25 00:29:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:29:15 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Apr-25 00:29:15 LOG1 fixed_driftmap: New position: year = 2008.3176463039015 RA = 14:16:05.7 RA/Dec = 14:16:29.6 +32:11:59.9 2008-Apr-25 00:29:15 NOTE fixed_driftmap: Correcting ZA to 13:50:46.2 ... 2008-Apr-25 00:29:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8461744095 -CF 2008-Apr-25 00:29:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 00:29:15 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 00:29:15 LOG5 begin_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-25 00:29:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 00:29:15 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 00:29:15 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 00:29:15 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-25 00:29:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 00:29:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 00:29:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:29:15 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 00:29:15 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-25 00:29:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8461744095 -CF 2008-Apr-25 00:29:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:29:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 00:29:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:29:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:29:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:29:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 00:29:15 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Apr-25 00:29:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 00:29:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:29:15 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 00:29:15 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:29:15 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:29:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:29:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:29:16 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:29:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 00:29:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:29:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:29:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:29:16 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:29:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:29:16 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:29:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:29:16 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 00:29:16 LOG5 finish_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 00:29:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:29:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 00:29:16 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 00:29:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 00:29:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 00:29:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:29:16 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:29:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 00:29:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:29:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:29:16 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 00:29:16 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 00:29:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:29:16 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-25 00:29:16 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 00:29:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:29:16 INFO2 take_spectra: Starting WAPP scan: 811600004 2008-Apr-25 00:29:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 00:29:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:29:17 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-25 00:29:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:29:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16158.00 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:29:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:29:19 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Apr-25 00:29:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:29:19 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Apr-25 00:29:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 00:29:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 00:29:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 00:29:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:29:19 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-25 00:29:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.475 > 1.4)! 2008-Apr-25 00:29:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.250 1.415 1.186 1.475 2008-Apr-25 00:29:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.962 0.976 1.064 2008-Apr-25 00:29:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.966 0.985 1.129 2008-Apr-25 00:29:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.049 0.911 0.931 2008-Apr-25 00:29:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:29:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 00:29:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:29:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:29:19 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Apr-25 00:29:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 00:29:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 00:29:19 LOG5 finish_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-25 00:29:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 00:29:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:29:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 00:29:19 LOG5 end_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Apr-25 00:29:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Apr-25 00:29:19 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Apr-25 00:29:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:29:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:29:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:29:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:29:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 00:29:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 00:29:20 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 00:29:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:29:20 LOG5 begin_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-25 00:29:20 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 00:29:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:29:20 INFO2 take_spectra: Starting WAPP scan: 811600005 2008-Apr-25 00:29:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 00:29:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:29:20 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-25 00:29:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:29:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:29:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16161.00 2008-Apr-25 00:29:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0002.fits 2008-Apr-25 00:29:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0002.fits} 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 1.512 (still bad) 2008-Apr-25 00:29:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.131 2008-Apr-25 00:39:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:39:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:39:21 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Apr-25 00:39:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:39:21 LOG5 end_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2008-Apr-25 00:39:21 LOG1 fixed_driftmap: New position: year = 2008.3176655068826 RA = 14:26:13.6 RA/Dec = 14:26:37.3 +32:12:03.6 2008-Apr-25 00:39:21 NOTE fixed_driftmap: Correcting ZA to 13:50:49.9 ... 2008-Apr-25 00:39:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8471823389 -CF 2008-Apr-25 00:39:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 00:39:21 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 00:39:21 LOG5 begin_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-25 00:39:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 00:39:21 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 00:39:21 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 00:39:21 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-25 00:39:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 00:39:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 00:39:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:39:21 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 00:39:21 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-25 00:39:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8471823389 -CF 2008-Apr-25 00:39:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:39:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 00:39:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:39:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:39:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:39:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 00:39:21 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Apr-25 00:39:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 00:39:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:39:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 00:39:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:39:21 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:39:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:39:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:39:22 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:39:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 00:39:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:39:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:39:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:39:22 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:39:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:39:22 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:39:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:39:22 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 00:39:22 LOG5 finish_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 00:39:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:39:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 00:39:22 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 00:39:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 00:39:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 00:39:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:39:22 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:39:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 00:39:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:39:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:39:22 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 00:39:22 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 00:39:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:39:22 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 00:39:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:39:22 INFO2 take_spectra: Starting WAPP scan: 811600006 2008-Apr-25 00:39:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 00:39:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:39:22 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-25 00:39:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:39:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16763.00 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:39:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:39:24 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Apr-25 00:39:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:39:24 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Apr-25 00:39:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 00:39:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 00:39:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 00:39:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:39:24 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-25 00:39:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:39:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 00:39:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.477 > 1.4)! 2008-Apr-25 00:39:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.256 1.418 1.185 1.477 2008-Apr-25 00:39:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.963 0.975 1.066 2008-Apr-25 00:39:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.968 0.984 1.133 2008-Apr-25 00:39:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.048 0.911 0.930 2008-Apr-25 00:39:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:39:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:39:24 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Apr-25 00:39:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 00:39:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 00:39:24 LOG5 finish_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-25 00:39:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 00:39:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:39:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 00:39:24 LOG5 end_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Apr-25 00:39:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Apr-25 00:39:24 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Apr-25 00:39:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:39:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:39:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:39:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:39:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 00:39:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 00:39:25 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 00:39:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:39:25 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-25 00:39:25 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 00:39:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:39:25 INFO2 take_spectra: Starting WAPP scan: 811600007 2008-Apr-25 00:39:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 00:39:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:39:25 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-25 00:39:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:39:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:39:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16766.00 2008-Apr-25 00:39:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0003.fits 2008-Apr-25 00:39:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0003.fits} 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 1.516 (still bad) 2008-Apr-25 00:39:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.133 2008-Apr-25 00:49:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:49:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:49:26 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Apr-25 00:49:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:49:26 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2008-Apr-25 00:49:26 LOG1 fixed_driftmap: New position: year = 2008.3176846781757 RA = 14:36:20.6 RA/Dec = 14:36:43.9 +32:12:07.5 2008-Apr-25 00:49:26 NOTE fixed_driftmap: Correcting ZA to 13:50:53.8 ... 2008-Apr-25 00:49:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8482648536 -CF 2008-Apr-25 00:49:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 00:49:26 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 00:49:26 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-25 00:49:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 00:49:26 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 00:49:26 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 00:49:26 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-25 00:49:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 00:49:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 00:49:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:49:26 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 00:49:26 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-25 00:49:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8482648536 -CF 2008-Apr-25 00:49:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:49:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 00:49:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:49:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:49:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:49:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 00:49:26 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Apr-25 00:49:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 00:49:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:49:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 00:49:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:49:27 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:49:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:49:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:49:27 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:49:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 00:49:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:49:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:49:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:49:27 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:49:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:49:27 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:49:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:49:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 00:49:27 LOG5 finish_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 00:49:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:49:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 00:49:27 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 00:49:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 00:49:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 00:49:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:49:27 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:49:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 00:49:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:49:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:49:27 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 00:49:27 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 00:49:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:49:27 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 00:49:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:49:27 INFO2 take_spectra: Starting WAPP scan: 811600008 2008-Apr-25 00:49:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 00:49:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:49:27 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-25 00:49:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:49:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17368.00 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:49:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:49:29 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Apr-25 00:49:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:49:29 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Apr-25 00:49:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 00:49:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 00:49:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 00:49:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:49:29 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-25 00:49:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:49:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 00:49:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.480 > 1.4)! 2008-Apr-25 00:49:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.262 1.419 1.190 1.480 2008-Apr-25 00:49:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.962 0.974 1.067 2008-Apr-25 00:49:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.972 0.990 1.136 2008-Apr-25 00:49:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 1.051 0.912 0.933 2008-Apr-25 00:49:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:49:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:49:29 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Apr-25 00:49:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 00:49:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 00:49:29 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-25 00:49:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 00:49:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:49:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 00:49:29 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Apr-25 00:49:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Apr-25 00:49:30 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Apr-25 00:49:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:49:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:49:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:49:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:49:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 00:49:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 00:49:30 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 00:49:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:49:30 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-25 00:49:30 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 00:49:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:49:30 INFO2 take_spectra: Starting WAPP scan: 811600009 2008-Apr-25 00:49:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 00:49:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:49:30 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-25 00:49:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:49:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:49:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17371.00 2008-Apr-25 00:49:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0004.fits 2008-Apr-25 00:49:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0004.fits} 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:49:32 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.522 (still bad) 2008-Apr-25 00:49:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.887 and 1.138 2008-Apr-25 00:59:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:59:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:59:31 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Apr-25 00:59:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:59:31 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Apr-25 00:59:31 LOG1 fixed_driftmap: New position: year = 2008.3177038494689 RA = 14:46:27.5 RA/Dec = 14:46:50.6 +32:12:11.6 2008-Apr-25 00:59:31 NOTE fixed_driftmap: Correcting ZA to 13:50:57.9 ... 2008-Apr-25 00:59:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8494214464 -CF 2008-Apr-25 00:59:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 00:59:31 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 00:59:31 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-25 00:59:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 00:59:31 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 00:59:31 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 00:59:31 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-25 00:59:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 00:59:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 00:59:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:59:31 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 00:59:31 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-25 00:59:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8494214464 -CF 2008-Apr-25 00:59:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:59:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 00:59:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 00:59:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:59:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 00:59:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 00:59:32 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 00:59:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:59:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 00:59:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:59:32 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 00:59:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:59:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:59:32 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:59:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 00:59:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 00:59:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:59:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 00:59:32 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 00:59:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 00:59:32 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 00:59:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 00:59:32 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 00:59:32 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 00:59:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:59:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 00:59:32 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 00:59:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 00:59:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 00:59:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:59:32 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:59:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 00:59:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:59:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:59:32 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 00:59:32 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 00:59:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:59:32 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-25 00:59:32 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 00:59:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:59:32 INFO2 take_spectra: Starting WAPP scan: 811600010 2008-Apr-25 00:59:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 00:59:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:59:33 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-25 00:59:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:59:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17974.00 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 00:59:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 00:59:35 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Apr-25 00:59:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 00:59:35 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Apr-25 00:59:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 00:59:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 00:59:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 00:59:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 00:59:35 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-25 00:59:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 00:59:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 00:59:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 00:59:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 00:59:35 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Apr-25 00:59:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 00:59:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 00:59:35 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-25 00:59:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 00:59:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 00:59:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 00:59:35 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Apr-25 00:59:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Apr-25 00:59:35 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Apr-25 00:59:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 00:59:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 00:59:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 00:59:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 00:59:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 00:59:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 00:59:36 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 00:59:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 00:59:36 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-25 00:59:36 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 00:59:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 00:59:36 INFO2 take_spectra: Starting WAPP scan: 811600011 2008-Apr-25 00:59:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 00:59:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 00:59:36 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-25 00:59:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 00:59:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 00:59:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0005.fits 2008-Apr-25 00:59:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17977.00 2008-Apr-25 00:59:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0005.fits} 2008-Apr-25 00:59:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.541 > 1.4)! 2008-Apr-25 00:59:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.260 1.428 1.192 1.483 2008-Apr-25 00:59:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.420 1.325 1.347 1.459 2008-Apr-25 00:59:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.291 1.361 1.386 1.541 2008-Apr-25 00:59:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.457 1.462 1.274 1.297 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 00:59:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.149 2008-Apr-25 01:09:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:09:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:09:37 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Apr-25 01:09:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:09:37 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Apr-25 01:09:37 LOG1 fixed_driftmap: New position: year = 2008.31772305245 RA = 14:56:35.4 RA/Dec = 14:56:58.2 +32:12:16.0 2008-Apr-25 01:09:37 NOTE fixed_driftmap: Correcting ZA to 13:51:02.3 ... 2008-Apr-25 01:09:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8506519485 -CF 2008-Apr-25 01:09:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 01:09:37 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 01:09:37 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-25 01:09:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 01:09:37 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 01:09:37 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 01:09:37 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-25 01:09:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 01:09:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 01:09:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:09:37 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 01:09:37 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-25 01:09:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8506519485 -CF 2008-Apr-25 01:09:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:09:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 01:09:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:09:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:09:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 01:09:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 01:09:37 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Apr-25 01:09:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 01:09:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:09:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 01:09:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:09:37 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:09:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:09:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:09:38 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:09:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 01:09:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:09:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:09:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:09:38 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:09:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:09:38 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:09:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:09:38 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 01:09:38 LOG5 finish_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 01:09:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:09:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 01:09:38 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 01:09:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 01:09:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 01:09:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:09:38 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:09:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 01:09:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:09:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:09:38 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 01:09:38 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 01:09:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:09:38 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 01:09:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:09:38 INFO2 take_spectra: Starting WAPP scan: 811600012 2008-Apr-25 01:09:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 01:09:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:09:38 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-25 01:09:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:09:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18579.00 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:09:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:09:40 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Apr-25 01:09:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:09:40 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Apr-25 01:09:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 01:09:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 01:09:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 01:09:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:09:40 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-25 01:09:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:09:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 01:09:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:09:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:09:40 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Apr-25 01:09:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 01:09:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 01:09:40 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-25 01:09:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 01:09:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:09:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 01:09:40 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Apr-25 01:09:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Apr-25 01:09:40 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Apr-25 01:09:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 01:09:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 01:09:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 01:09:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 01:09:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 01:09:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 01:09:41 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 01:09:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:09:41 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-25 01:09:41 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 01:09:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:09:41 INFO2 take_spectra: Starting WAPP scan: 811600013 2008-Apr-25 01:09:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 01:09:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:09:41 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-25 01:09:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 01:09:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:09:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.512 > 1.4)! 2008-Apr-25 01:09:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.256 1.418 1.185 1.477 2008-Apr-25 01:09:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.418 1.319 1.343 1.450 2008-Apr-25 01:09:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.278 1.348 1.366 1.512 2008-Apr-25 01:09:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.444 1.454 1.265 1.289 2008-Apr-25 01:09:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0006.fits 2008-Apr-25 01:09:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0006.fits} 2008-Apr-25 01:09:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18582.00 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 1.477 (still bad) 2008-Apr-25 01:09:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.131 2008-Apr-25 01:19:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:19:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:19:42 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Apr-25 01:19:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:19:42 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Apr-25 01:19:42 LOG1 fixed_driftmap: New position: year = 2008.3177422237432 RA = 15:06:42.3 RA/Dec = 15:07:04.9 +32:12:20.7 2008-Apr-25 01:19:42 NOTE fixed_driftmap: Correcting ZA to 13:51:07.0 ... 2008-Apr-25 01:19:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8519498970 -CF 2008-Apr-25 01:19:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 01:19:42 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 01:19:42 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-25 01:19:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 01:19:42 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 01:19:42 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 01:19:42 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-25 01:19:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 01:19:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 01:19:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:19:42 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 01:19:42 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-25 01:19:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8519498970 -CF 2008-Apr-25 01:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:19:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 01:19:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:19:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 01:19:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 01:19:42 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Apr-25 01:19:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 01:19:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:19:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 01:19:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:19:42 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-25 01:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:19:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:19:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:19:43 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:19:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 01:19:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:19:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:19:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:19:43 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:19:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:19:43 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:19:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:19:43 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 01:19:43 LOG5 finish_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 01:19:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:19:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 01:19:43 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 01:19:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 01:19:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 01:19:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:19:43 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:19:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 01:19:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:19:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:19:43 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 01:19:43 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 01:19:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:19:43 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 01:19:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:19:43 INFO2 take_spectra: Starting WAPP scan: 811600014 2008-Apr-25 01:19:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 01:19:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:19:43 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-25 01:19:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:19:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19184.00 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:19:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:19:45 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Apr-25 01:19:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:19:45 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Apr-25 01:19:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 01:19:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 01:19:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 01:19:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:19:45 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-25 01:19:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:19:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 01:19:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:19:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:19:45 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Apr-25 01:19:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 01:19:45 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 01:19:45 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-25 01:19:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 01:19:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:19:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 01:19:45 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Apr-25 01:19:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Apr-25 01:19:45 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Apr-25 01:19:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 01:19:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 01:19:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 01:19:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 01:19:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 01:19:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 01:19:46 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 01:19:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:19:46 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-25 01:19:46 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 01:19:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:19:46 INFO2 take_spectra: Starting WAPP scan: 811600015 2008-Apr-25 01:19:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 01:19:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:19:46 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-25 01:19:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 01:19:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:19:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0007.fits 2008-Apr-25 01:19:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0007.fits} 2008-Apr-25 01:19:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19187.00 2008-Apr-25 01:19:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.512 > 1.4)! 2008-Apr-25 01:19:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.257 1.412 1.185 1.478 2008-Apr-25 01:19:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.413 1.321 1.347 1.453 2008-Apr-25 01:19:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.278 1.349 1.363 1.512 2008-Apr-25 01:19:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.467 1.480 1.282 1.312 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:19:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.886 and 1.130 2008-Apr-25 01:24:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.658 > 1.4)! 2008-Apr-25 01:24:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.658 0.922 1.148 2008-Apr-25 01:24:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.967 0.974 1.067 2008-Apr-25 01:24:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.973 0.987 1.138 2008-Apr-25 01:24:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.055 0.911 0.936 2008-Apr-25 01:24:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.911 and 1.379 2008-Apr-25 01:24:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.571 > 1.4)! 2008-Apr-25 01:24:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.571 0.930 1.162 2008-Apr-25 01:24:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.969 0.974 1.066 2008-Apr-25 01:24:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.975 0.991 1.140 2008-Apr-25 01:24:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.057 0.911 0.938 2008-Apr-25 01:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.532 (still bad) 2008-Apr-25 01:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.471 (still bad) 2008-Apr-25 01:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.497 (still bad) 2008-Apr-25 01:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.444 (still bad) 2008-Apr-25 01:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.454 (still bad) 2008-Apr-25 01:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.456 (still bad) 2008-Apr-25 01:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.463 (still bad) 2008-Apr-25 01:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.472 (still bad) 2008-Apr-25 01:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.474 (still bad) 2008-Apr-25 01:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.465 (still bad) 2008-Apr-25 01:24:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.912 and 1.292 2008-Apr-25 01:24:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.429 > 1.4)! 2008-Apr-25 01:24:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.429 0.920 1.156 2008-Apr-25 01:24:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.970 0.974 1.066 2008-Apr-25 01:24:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.976 0.987 1.141 2008-Apr-25 01:24:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.061 0.915 0.943 2008-Apr-25 01:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.915 and 1.439 (still bad) 2008-Apr-25 01:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.442 (still bad) 2008-Apr-25 01:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.445 (still bad) 2008-Apr-25 01:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.446 (still bad) 2008-Apr-25 01:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.445 (still bad) 2008-Apr-25 01:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.445 (still bad) 2008-Apr-25 01:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.443 (still bad) 2008-Apr-25 01:25:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.314 2008-Apr-25 01:25:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.415 > 1.4)! 2008-Apr-25 01:25:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.415 0.916 1.157 2008-Apr-25 01:25:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.972 0.973 1.067 2008-Apr-25 01:25:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.976 0.989 1.140 2008-Apr-25 01:25:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 1.063 0.916 0.943 2008-Apr-25 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.425 (still bad) 2008-Apr-25 01:25:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.400 2008-Apr-25 01:25:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.426 > 1.4)! 2008-Apr-25 01:25:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.426 0.912 1.156 2008-Apr-25 01:25:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.969 0.972 1.067 2008-Apr-25 01:25:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.976 0.987 1.139 2008-Apr-25 01:25:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.060 0.915 0.941 2008-Apr-25 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.912 and 1.438 (still bad) 2008-Apr-25 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.441 (still bad) 2008-Apr-25 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.446 (still bad) 2008-Apr-25 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.442 (still bad) 2008-Apr-25 01:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.907 and 1.446 (still bad) 2008-Apr-25 01:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.451 (still bad) 2008-Apr-25 01:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.904 and 1.449 (still bad) 2008-Apr-25 01:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.452 (still bad) 2008-Apr-25 01:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.453 (still bad) 2008-Apr-25 01:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.451 (still bad) 2008-Apr-25 01:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.451 (still bad) 2008-Apr-25 01:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.455 (still bad) 2008-Apr-25 01:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.453 (still bad) 2008-Apr-25 01:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.454 (still bad) 2008-Apr-25 01:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.451 (still bad) 2008-Apr-25 01:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.447 (still bad) 2008-Apr-25 01:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.453 (still bad) 2008-Apr-25 01:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.451 (still bad) 2008-Apr-25 01:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.448 (still bad) 2008-Apr-25 01:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.449 (still bad) 2008-Apr-25 01:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.444 (still bad) 2008-Apr-25 01:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.446 (still bad) 2008-Apr-25 01:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.439 (still bad) 2008-Apr-25 01:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.435 (still bad) 2008-Apr-25 01:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.439 (still bad) 2008-Apr-25 01:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.442 (still bad) 2008-Apr-25 01:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.439 (still bad) 2008-Apr-25 01:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.436 (still bad) 2008-Apr-25 01:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.436 (still bad) 2008-Apr-25 01:26:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.441 > 1.4)! 2008-Apr-25 01:26:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.441 0.897 1.138 2008-Apr-25 01:26:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.967 0.976 1.068 2008-Apr-25 01:26:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.976 0.987 1.136 2008-Apr-25 01:26:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 1.057 0.913 0.939 2008-Apr-25 01:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.443 (still bad) 2008-Apr-25 01:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.435 (still bad) 2008-Apr-25 01:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.438 (still bad) 2008-Apr-25 01:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.436 (still bad) 2008-Apr-25 01:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.436 (still bad) 2008-Apr-25 01:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.429 (still bad) 2008-Apr-25 01:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.427 (still bad) 2008-Apr-25 01:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.422 (still bad) 2008-Apr-25 01:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.428 (still bad) 2008-Apr-25 01:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.427 (still bad) 2008-Apr-25 01:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.423 (still bad) 2008-Apr-25 01:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.426 (still bad) 2008-Apr-25 01:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.417 (still bad) 2008-Apr-25 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.422 (still bad) 2008-Apr-25 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.422 (still bad) 2008-Apr-25 01:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.423 (still bad) 2008-Apr-25 01:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.415 (still bad) 2008-Apr-25 01:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.423 (still bad) 2008-Apr-25 01:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.415 (still bad) 2008-Apr-25 01:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.415 (still bad) 2008-Apr-25 01:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.416 (still bad) 2008-Apr-25 01:26:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.375 2008-Apr-25 01:26:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.437 > 1.4)! 2008-Apr-25 01:26:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.437 0.901 1.136 2008-Apr-25 01:26:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.965 0.976 1.068 2008-Apr-25 01:26:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.976 0.989 1.134 2008-Apr-25 01:26:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.056 0.911 0.935 2008-Apr-25 01:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.427 (still bad) 2008-Apr-25 01:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.446 (still bad) 2008-Apr-25 01:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.902 and 1.443 (still bad) 2008-Apr-25 01:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.432 (still bad) 2008-Apr-25 01:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.424 (still bad) 2008-Apr-25 01:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.416 (still bad) 2008-Apr-25 01:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.413 (still bad) 2008-Apr-25 01:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.409 (still bad) 2008-Apr-25 01:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.416 (still bad) 2008-Apr-25 01:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.417 (still bad) 2008-Apr-25 01:27:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.392 2008-Apr-25 01:27:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.403 > 1.4)! 2008-Apr-25 01:27:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.403 0.899 1.136 2008-Apr-25 01:27:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 0.966 0.977 1.070 2008-Apr-25 01:27:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.975 0.985 1.133 2008-Apr-25 01:27:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 1.055 0.911 0.935 2008-Apr-25 01:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.405 (still bad) 2008-Apr-25 01:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.438 (still bad) 2008-Apr-25 01:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.899 and 1.444 (still bad) 2008-Apr-25 01:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.444 (still bad) 2008-Apr-25 01:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.443 (still bad) 2008-Apr-25 01:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.440 (still bad) 2008-Apr-25 01:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.438 (still bad) 2008-Apr-25 01:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.441 (still bad) 2008-Apr-25 01:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.440 (still bad) 2008-Apr-25 01:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.449 (still bad) 2008-Apr-25 01:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.450 (still bad) 2008-Apr-25 01:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.450 (still bad) 2008-Apr-25 01:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.448 (still bad) 2008-Apr-25 01:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.443 (still bad) 2008-Apr-25 01:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.438 (still bad) 2008-Apr-25 01:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.897 and 1.433 (still bad) 2008-Apr-25 01:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.430 (still bad) 2008-Apr-25 01:27:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.397 2008-Apr-25 01:29:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:29:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:29:47 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Apr-25 01:29:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:29:47 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Apr-25 01:29:47 LOG1 fixed_driftmap: New position: year = 2008.3177613950363 RA = 15:16:49.2 RA/Dec = 15:17:11.6 +32:12:25.6 2008-Apr-25 01:29:47 NOTE fixed_driftmap: Correcting ZA to 13:51:11.9 ... 2008-Apr-25 01:29:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8533147458 -CF 2008-Apr-25 01:29:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 01:29:47 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 01:29:47 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-25 01:29:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 01:29:47 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 01:29:47 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 01:29:47 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-25 01:29:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 01:29:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 01:29:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:29:47 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 01:29:47 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-25 01:29:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8533147458 -CF 2008-Apr-25 01:29:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:29:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 01:29:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:29:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:29:47 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 01:29:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 01:29:47 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Apr-25 01:29:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 01:29:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:29:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 01:29:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:29:47 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-25 01:29:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:29:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:29:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:29:49 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:29:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 01:29:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:29:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:29:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:29:49 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:29:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:29:49 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:29:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:29:49 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 01:29:49 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 01:29:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:29:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 01:29:49 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 01:29:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 01:29:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 01:29:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:29:49 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:29:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 01:29:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:29:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:29:49 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 01:29:49 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 01:29:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:29:49 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-25 01:29:49 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 01:29:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:29:49 INFO2 take_spectra: Starting WAPP scan: 811600016 2008-Apr-25 01:29:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 01:29:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:29:50 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-25 01:29:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:29:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19791.00 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.702 > 1.4)! 2008-Apr-25 01:29:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.267 1.702 1.200 1.510 2008-Apr-25 01:29:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.419 1.325 1.349 1.455 2008-Apr-25 01:29:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.285 1.358 1.382 1.537 2008-Apr-25 01:29:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.451 1.464 1.272 1.299 2008-Apr-25 01:29:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:29:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:29:52 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Apr-25 01:29:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:29:52 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Apr-25 01:29:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 01:29:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 01:29:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 01:29:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:29:52 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-25 01:29:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:29:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 01:29:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:29:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:29:52 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Apr-25 01:29:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 01:29:52 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 01:29:52 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-25 01:29:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 01:29:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:29:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 01:29:52 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Apr-25 01:29:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Apr-25 01:29:52 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Apr-25 01:29:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 01:29:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 01:29:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 01:29:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 01:29:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 01:29:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 01:29:53 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 01:29:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:29:53 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-25 01:29:53 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 01:29:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:29:53 INFO2 take_spectra: Starting WAPP scan: 811600017 2008-Apr-25 01:29:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 01:29:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:29:53 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-25 01:29:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 01:29:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:29:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0008.fits 2008-Apr-25 01:29:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0008.fits} 2008-Apr-25 01:29:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19794.00 2008-Apr-25 01:29:54 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.702 (still bad) 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:29:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.335 2008-Apr-25 01:39:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:39:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:39:54 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Apr-25 01:39:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:39:54 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-Apr-25 01:39:54 LOG1 fixed_driftmap: New position: year = 2008.3177806297056 RA = 15:26:58.0 RA/Dec = 15:27:20.2 +32:12:30.8 2008-Apr-25 01:39:54 NOTE fixed_driftmap: Correcting ZA to 13:51:17.1 ... 2008-Apr-25 01:39:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8547486540 -CF 2008-Apr-25 01:39:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 01:39:54 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 01:39:54 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-25 01:39:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 01:39:54 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 01:39:54 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 01:39:54 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-25 01:39:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 01:39:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 01:39:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:39:54 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 01:39:54 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-25 01:39:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8547486540 -CF 2008-Apr-25 01:39:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:39:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 01:39:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:39:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:39:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 01:39:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 01:39:54 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Apr-25 01:39:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 01:39:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:39:54 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 01:39:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:39:54 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-25 01:39:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:39:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:39:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:39:55 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:39:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 01:39:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:39:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:39:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:39:55 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:39:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:39:55 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:39:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:39:55 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 01:39:55 LOG5 finish_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 01:39:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:39:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 01:39:55 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 01:39:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 01:39:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 01:39:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:39:55 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:39:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 01:39:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:39:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:39:55 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 01:39:55 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 01:39:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:39:55 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-25 01:39:55 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 01:39:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:39:55 INFO2 take_spectra: Starting WAPP scan: 811600018 2008-Apr-25 01:39:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 01:39:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:39:56 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-25 01:39:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:39:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20397.00 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:39:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.611 > 1.4)! 2008-Apr-25 01:39:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.258 1.611 1.189 1.489 2008-Apr-25 01:39:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.415 1.325 1.346 1.456 2008-Apr-25 01:39:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.287 1.363 1.367 1.525 2008-Apr-25 01:39:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.449 1.463 1.269 1.299 2008-Apr-25 01:39:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:39:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:39:58 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Apr-25 01:39:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:39:58 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Apr-25 01:39:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 01:39:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 01:39:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 01:39:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:39:58 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-25 01:39:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:39:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 01:39:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:39:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:39:58 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Apr-25 01:39:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 01:39:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 01:39:58 LOG5 finish_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-25 01:39:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 01:39:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:39:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 01:39:58 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2008-Apr-25 01:39:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Apr-25 01:39:58 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Apr-25 01:39:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 01:39:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 01:39:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 01:39:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 01:39:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 01:39:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 01:39:59 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 01:39:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:39:59 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-25 01:39:59 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 01:39:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:39:59 INFO2 take_spectra: Starting WAPP scan: 811600019 2008-Apr-25 01:39:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 01:39:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:39:59 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-25 01:39:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 01:39:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:39:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0009.fits 2008-Apr-25 01:39:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0009.fits} 2008-Apr-25 01:39:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20400.00 2008-Apr-25 01:40:00 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.611 (still bad) 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:40:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:40:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.265 2008-Apr-25 01:50:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:50:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:50:00 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Apr-25 01:50:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:50:00 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Apr-25 01:50:00 LOG1 fixed_driftmap: New position: year = 2008.3177998326869 RA = 15:37:05.9 RA/Dec = 15:37:27.9 +32:12:36.2 2008-Apr-25 01:50:00 NOTE fixed_driftmap: Correcting ZA to 13:51:22.5 ... 2008-Apr-25 01:50:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8562418935 -CF 2008-Apr-25 01:50:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 01:50:00 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 01:50:00 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-25 01:50:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 01:50:00 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 01:50:00 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 01:50:00 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-25 01:50:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 01:50:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 01:50:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:50:00 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 01:50:00 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-25 01:50:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8562418935 -CF 2008-Apr-25 01:50:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:50:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 01:50:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 01:50:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:50:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 01:50:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 01:50:00 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Apr-25 01:50:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 01:50:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:50:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 01:50:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:50:00 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-25 01:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 01:50:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:50:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:50:01 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Apr-25 01:50:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:50:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 01:50:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 01:50:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:50:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 01:50:01 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-25 01:50:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 01:50:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 01:50:01 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Apr-25 01:50:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 01:50:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 01:50:01 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 01:50:01 LOG5 finish_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-25 01:50:01 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 01:50:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:50:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 01:50:02 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Apr-25 01:50:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 01:50:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 01:50:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 01:50:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:50:02 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-25 01:50:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:50:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 01:50:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:50:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:50:02 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Apr-25 01:50:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 01:50:02 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 01:50:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:50:02 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-25 01:50:02 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 01:50:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:50:02 INFO2 take_spectra: Starting WAPP scan: 811600020 2008-Apr-25 01:50:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 01:50:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:50:02 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-25 01:50:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:50:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21003.00 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.584 > 1.4)! 2008-Apr-25 01:50:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.262 1.584 1.184 1.478 2008-Apr-25 01:50:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.410 1.321 1.344 1.452 2008-Apr-25 01:50:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.287 1.358 1.365 1.525 2008-Apr-25 01:50:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.452 1.457 1.271 1.294 2008-Apr-25 01:50:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 01:50:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 01:50:04 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Apr-25 01:50:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 01:50:04 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Apr-25 01:50:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 01:50:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 01:50:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 01:50:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 01:50:04 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-25 01:50:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 01:50:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 01:50:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 01:50:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 01:50:04 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Apr-25 01:50:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 01:50:04 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 01:50:04 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-25 01:50:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 01:50:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 01:50:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 01:50:04 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Apr-25 01:50:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Apr-25 01:50:05 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Apr-25 01:50:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 01:50:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 01:50:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 01:50:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 01:50:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 01:50:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 01:50:05 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 01:50:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 01:50:05 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-25 01:50:05 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 01:50:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 01:50:05 INFO2 take_spectra: Starting WAPP scan: 811600021 2008-Apr-25 01:50:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 01:50:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 01:50:05 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-25 01:50:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 01:50:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 01:50:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21006.00 2008-Apr-25 01:50:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0010.fits 2008-Apr-25 01:50:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0010.fits} 2008-Apr-25 01:50:06 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.584 (still bad) 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 01:50:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.244 2008-Apr-25 01:54:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.418 > 1.4)! 2008-Apr-25 01:54:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.418 0.889 1.116 2008-Apr-25 01:54:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.962 0.976 1.066 2008-Apr-25 01:54:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.972 0.985 1.136 2008-Apr-25 01:54:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 1.053 0.911 0.934 2008-Apr-25 01:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.896 and 1.526 (still bad) 2008-Apr-25 01:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 1.527 (still bad) 2008-Apr-25 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 1.514 (still bad) 2008-Apr-25 01:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 1.497 (still bad) 2008-Apr-25 01:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 1.486 (still bad) 2008-Apr-25 01:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 1.473 (still bad) 2008-Apr-25 01:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 1.460 (still bad) 2008-Apr-25 01:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 1.453 (still bad) 2008-Apr-25 01:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 1.444 (still bad) 2008-Apr-25 01:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 1.436 (still bad) 2008-Apr-25 01:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 1.427 (still bad) 2008-Apr-25 01:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 1.421 (still bad) 2008-Apr-25 01:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 1.415 (still bad) 2008-Apr-25 01:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 1.412 (still bad) 2008-Apr-25 01:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 1.408 (still bad) 2008-Apr-25 01:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.890 and 1.403 (still bad) 2008-Apr-25 01:55:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.399 2008-Apr-25 01:58:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.407 > 1.4)! 2008-Apr-25 01:58:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.407 0.893 1.125 2008-Apr-25 01:58:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.967 0.976 1.067 2008-Apr-25 01:58:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.976 0.987 1.139 2008-Apr-25 01:58:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.058 0.914 0.938 2008-Apr-25 01:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 1.403 (still bad) 2008-Apr-25 01:58:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.395 2008-Apr-25 01:59:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.442 > 1.4)! 2008-Apr-25 01:59:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 1.442 0.892 1.123 2008-Apr-25 01:59:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.966 0.975 1.067 2008-Apr-25 01:59:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.974 0.984 1.138 2008-Apr-25 01:59:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.055 0.910 0.935 2008-Apr-25 01:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 1.419 (still bad) 2008-Apr-25 01:59:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.326 2008-Apr-25 01:59:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.407 > 1.4)! 2008-Apr-25 01:59:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.407 0.896 1.126 2008-Apr-25 01:59:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.967 0.973 1.067 2008-Apr-25 01:59:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.973 0.985 1.137 2008-Apr-25 01:59:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.056 0.910 0.936 2008-Apr-25 01:59:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.397 2008-Apr-25 02:00:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:00:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:00:06 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Apr-25 02:00:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:00:06 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Apr-25 02:00:06 LOG1 fixed_driftmap: New position: year = 2008.317819035668 RA = 15:47:13.8 RA/Dec = 15:47:35.5 +32:12:41.8 2008-Apr-25 02:00:06 NOTE fixed_driftmap: Correcting ZA to 13:51:28.1 ... 2008-Apr-25 02:00:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8577938592 -CF 2008-Apr-25 02:00:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 02:00:06 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 02:00:06 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-25 02:00:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 02:00:06 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 02:00:06 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 02:00:06 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-25 02:00:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 02:00:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 02:00:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:00:06 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 02:00:06 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-25 02:00:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8577938592 -CF 2008-Apr-25 02:00:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:00:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 02:00:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:00:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:00:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:00:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 02:00:07 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 02:00:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:00:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 02:00:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:00:07 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:00:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:00:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:00:07 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:00:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 02:00:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:00:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:00:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:00:07 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:00:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:00:07 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:00:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:00:07 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 02:00:07 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 02:00:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:00:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 02:00:07 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:00:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:00:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:00:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:00:07 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:00:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:00:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:00:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:00:07 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 02:00:07 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 02:00:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:00:07 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 02:00:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:00:07 INFO2 take_spectra: Starting WAPP scan: 811600022 2008-Apr-25 02:00:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 02:00:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:00:07 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-25 02:00:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:00:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21608.00 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:00:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:00:09 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Apr-25 02:00:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:00:09 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Apr-25 02:00:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:00:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:00:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:00:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:00:09 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-25 02:00:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.773 > 1.4)! 2008-Apr-25 02:00:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.263 1.773 1.196 1.511 2008-Apr-25 02:00:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.413 1.324 1.347 1.454 2008-Apr-25 02:00:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.278 1.353 1.367 1.518 2008-Apr-25 02:00:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.444 1.464 1.265 1.296 2008-Apr-25 02:00:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:00:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:00:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:00:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:00:09 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Apr-25 02:00:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 02:00:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 02:00:09 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-25 02:00:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 02:00:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:00:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 02:00:09 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Apr-25 02:00:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Apr-25 02:00:10 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Apr-25 02:00:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:00:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:00:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:00:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:00:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 02:00:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 02:00:10 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 02:00:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:00:10 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-25 02:00:10 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 02:00:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:00:10 INFO2 take_spectra: Starting WAPP scan: 811600023 2008-Apr-25 02:00:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 02:00:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:00:10 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-25 02:00:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:00:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:00:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0011.fits 2008-Apr-25 02:00:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21611.00 2008-Apr-25 02:00:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0011.fits} 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:00:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.382 2008-Apr-25 02:00:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.403 > 1.4)! 2008-Apr-25 02:00:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.403 0.891 1.126 2008-Apr-25 02:00:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.966 0.975 1.068 2008-Apr-25 02:00:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.975 0.988 1.136 2008-Apr-25 02:00:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.055 0.909 0.935 2008-Apr-25 02:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.891 and 1.401 (still bad) 2008-Apr-25 02:00:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.375 2008-Apr-25 02:10:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:10:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:10:11 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Apr-25 02:10:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:10:11 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Apr-25 02:10:11 LOG1 fixed_driftmap: New position: year = 2008.3178382069611 RA = 15:57:20.7 RA/Dec = 15:57:42.2 +32:12:47.5 2008-Apr-25 02:10:11 NOTE fixed_driftmap: Correcting ZA to 13:51:33.8 ... 2008-Apr-25 02:10:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8593988181 -CF 2008-Apr-25 02:10:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 02:10:11 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 02:10:11 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-25 02:10:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 02:10:11 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 02:10:11 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 02:10:11 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-25 02:10:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 02:10:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 02:10:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:10:11 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 02:10:11 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-25 02:10:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8593988181 -CF 2008-Apr-25 02:10:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:10:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 02:10:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:10:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:10:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:10:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 02:10:12 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 02:10:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:10:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 02:10:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:10:12 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:10:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:10:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:10:12 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:10:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 02:10:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:10:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:10:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:10:12 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:10:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:10:12 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:10:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:10:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 02:10:12 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 02:10:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:10:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 02:10:12 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:10:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:10:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:10:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:10:12 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:10:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:10:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:10:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:10:12 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 02:10:12 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 02:10:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:10:12 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-25 02:10:12 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 02:10:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:10:12 INFO2 take_spectra: Starting WAPP scan: 811600024 2008-Apr-25 02:10:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 02:10:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:10:13 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-25 02:10:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:10:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22214.00 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.655 > 1.4)! 2008-Apr-25 02:10:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.262 1.655 1.191 1.491 2008-Apr-25 02:10:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.416 1.329 1.348 1.462 2008-Apr-25 02:10:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.981 0.987 1.146 2008-Apr-25 02:10:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.059 0.911 0.940 2008-Apr-25 02:10:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:10:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:10:15 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Apr-25 02:10:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:10:15 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Apr-25 02:10:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:10:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:10:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:10:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:10:15 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-25 02:10:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:10:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:10:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:10:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:10:15 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Apr-25 02:10:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 02:10:15 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 02:10:15 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-25 02:10:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 02:10:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:10:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 02:10:15 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Apr-25 02:10:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Apr-25 02:10:15 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Apr-25 02:10:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:10:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:10:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:10:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:10:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 02:10:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 02:10:16 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 02:10:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:10:16 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-25 02:10:16 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 02:10:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:10:16 INFO2 take_spectra: Starting WAPP scan: 811600025 2008-Apr-25 02:10:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 02:10:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:10:16 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-25 02:10:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:10:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:10:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0012.fits 2008-Apr-25 02:10:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22217.00 2008-Apr-25 02:10:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0012.fits} 2008-Apr-25 02:10:17 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.655 (still bad) 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:10:19 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.302 2008-Apr-25 02:20:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:20:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:20:17 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Apr-25 02:20:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:20:17 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Apr-25 02:20:17 LOG1 fixed_driftmap: New position: year = 2008.3178574099425 RA = 16:07:28.5 RA/Dec = 16:07:49.8 +32:12:53.5 2008-Apr-25 02:20:17 NOTE fixed_driftmap: Correcting ZA to 13:51:39.8 ... 2008-Apr-25 02:20:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8610589264 -CF 2008-Apr-25 02:20:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 02:20:17 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 02:20:17 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-25 02:20:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 02:20:17 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 02:20:17 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 02:20:17 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-25 02:20:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 02:20:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 02:20:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:20:17 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 02:20:17 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-25 02:20:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8610589264 -CF 2008-Apr-25 02:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:20:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 02:20:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:20:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:20:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 02:20:17 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Apr-25 02:20:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 02:20:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:20:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 02:20:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:20:17 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-25 02:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:20:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:20:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:20:18 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:20:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 02:20:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:20:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:20:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:20:18 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:20:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:20:18 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:20:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:20:18 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 02:20:18 LOG5 finish_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 02:20:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:20:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 02:20:18 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:20:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:20:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:20:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:20:18 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:20:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:20:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:20:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:20:18 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 02:20:18 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 02:20:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:20:18 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 02:20:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:20:18 INFO2 take_spectra: Starting WAPP scan: 811600026 2008-Apr-25 02:20:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 02:20:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:20:18 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-25 02:20:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:20:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22819.00 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:20:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.623 > 1.4)! 2008-Apr-25 02:20:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.257 1.623 1.189 1.487 2008-Apr-25 02:20:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.418 1.329 1.348 1.457 2008-Apr-25 02:20:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.287 1.363 1.371 1.527 2008-Apr-25 02:20:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.453 1.464 1.271 1.300 2008-Apr-25 02:20:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:20:20 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Apr-25 02:20:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:20:20 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Apr-25 02:20:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:20:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:20:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:20:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:20:20 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-25 02:20:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:20:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:20:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:20:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:20:20 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Apr-25 02:20:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 02:20:20 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 02:20:20 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-25 02:20:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 02:20:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:20:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 02:20:20 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Apr-25 02:20:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Apr-25 02:20:20 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Apr-25 02:20:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:20:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:20:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:20:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:20:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 02:20:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 02:20:21 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 02:20:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:20:21 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-25 02:20:21 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 02:20:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:20:21 INFO2 take_spectra: Starting WAPP scan: 811600027 2008-Apr-25 02:20:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 02:20:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:20:21 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-25 02:20:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:20:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:20:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0013.fits 2008-Apr-25 02:20:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0013.fits} 2008-Apr-25 02:20:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22822.00 2008-Apr-25 02:20:22 INFO5 check_wapp_levels: WAPP power levels are between 1.189 and 1.623 (still bad) 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:20:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.273 2008-Apr-25 02:30:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:30:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:30:22 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Apr-25 02:30:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:30:22 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Apr-25 02:30:22 LOG1 fixed_driftmap: New position: year = 2008.3178765812356 RA = 16:17:35.3 RA/Dec = 16:17:56.5 +32:12:59.7 2008-Apr-25 02:30:22 NOTE fixed_driftmap: Correcting ZA to 13:51:46.0 ... 2008-Apr-25 02:30:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8627654953 -CF 2008-Apr-25 02:30:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 02:30:22 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 02:30:22 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-25 02:30:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 02:30:22 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 02:30:22 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 02:30:22 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-25 02:30:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 02:30:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 02:30:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:30:22 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 02:30:22 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-25 02:30:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8627654953 -CF 2008-Apr-25 02:30:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:30:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 02:30:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:30:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:30:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:30:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 02:30:22 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Apr-25 02:30:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 02:30:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:30:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 02:30:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:30:22 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:30:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:30:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:30:23 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:30:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 02:30:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:30:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:30:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:30:23 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:30:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:30:23 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:30:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:30:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 02:30:23 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 02:30:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:30:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 02:30:23 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:30:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:30:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:30:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:30:23 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:30:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:30:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:30:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:30:23 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 02:30:23 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 02:30:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:30:23 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 02:30:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:30:23 INFO2 take_spectra: Starting WAPP scan: 811600028 2008-Apr-25 02:30:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 02:30:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:30:23 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-25 02:30:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:30:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23424.00 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:30:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:30:25 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Apr-25 02:30:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:30:25 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Apr-25 02:30:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:30:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:30:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:30:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:30:25 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-25 02:30:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:30:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:30:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.606 > 1.4)! 2008-Apr-25 02:30:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.262 1.606 1.185 1.483 2008-Apr-25 02:30:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.412 1.326 1.379 1.494 2008-Apr-25 02:30:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.343 1.429 1.368 1.527 2008-Apr-25 02:30:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.447 1.462 1.266 1.298 2008-Apr-25 02:30:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:30:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:30:25 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Apr-25 02:30:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 02:30:25 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 02:30:25 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-25 02:30:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 02:30:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:30:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 02:30:25 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Apr-25 02:30:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Apr-25 02:30:25 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Apr-25 02:30:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:30:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:30:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:30:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:30:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 02:30:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 02:30:26 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 02:30:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:30:26 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-25 02:30:26 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 02:30:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:30:26 INFO2 take_spectra: Starting WAPP scan: 811600029 2008-Apr-25 02:30:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 02:30:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:30:26 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-25 02:30:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:30:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:30:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0014.fits 2008-Apr-25 02:30:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23427.00 2008-Apr-25 02:30:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0014.fits} 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:30:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.261 2008-Apr-25 02:40:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:40:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:40:27 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Apr-25 02:40:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:40:27 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Apr-25 02:40:27 LOG1 fixed_driftmap: New position: year = 2008.3178957525286 RA = 16:27:42.2 RA/Dec = 16:28:03.2 +32:13:06.0 2008-Apr-25 02:40:27 NOTE fixed_driftmap: Correcting ZA to 13:51:52.3 ... 2008-Apr-25 02:40:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8645178823 -CF 2008-Apr-25 02:40:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 02:40:27 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 02:40:27 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-25 02:40:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 02:40:27 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 02:40:27 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 02:40:27 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-25 02:40:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 02:40:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 02:40:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:40:27 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 02:40:27 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-25 02:40:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8645178823 -CF 2008-Apr-25 02:40:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:40:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 02:40:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:40:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:40:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:40:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 02:40:27 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Apr-25 02:40:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 02:40:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:40:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 02:40:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:40:27 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-25 02:40:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:40:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:40:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:40:28 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:40:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 02:40:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:40:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:40:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:40:28 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:40:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:40:28 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:40:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:40:28 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 02:40:28 LOG5 finish_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 02:40:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:40:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 02:40:28 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:40:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:40:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:40:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:40:28 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:40:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:40:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:40:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:40:28 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 02:40:28 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 02:40:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:40:28 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 02:40:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:40:28 INFO2 take_spectra: Starting WAPP scan: 811600030 2008-Apr-25 02:40:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 02:40:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:40:28 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-25 02:40:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:40:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24029.00 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:40:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:40:30 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Apr-25 02:40:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:40:30 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Apr-25 02:40:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:40:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:40:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:40:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:40:30 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-25 02:40:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:40:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:40:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:40:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:40:30 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Apr-25 02:40:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 02:40:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 02:40:30 LOG5 finish_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-25 02:40:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 02:40:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:40:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 02:40:30 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Apr-25 02:40:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Apr-25 02:40:30 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Apr-25 02:40:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:40:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:40:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:40:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:40:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 02:40:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 02:40:31 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 02:40:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:40:31 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-25 02:40:31 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 02:40:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:40:31 INFO2 take_spectra: Starting WAPP scan: 811600031 2008-Apr-25 02:40:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 02:40:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:40:31 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-25 02:40:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:40:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.606 > 1.4)! 2008-Apr-25 02:40:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.265 1.606 1.187 1.490 2008-Apr-25 02:40:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.409 1.328 1.346 1.464 2008-Apr-25 02:40:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.364 1.370 1.536 2008-Apr-25 02:40:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.448 1.468 1.268 1.302 2008-Apr-25 02:40:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:40:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0015.fits 2008-Apr-25 02:40:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24032.00 2008-Apr-25 02:40:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0015.fits} 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:40:33 INFO5 check_wapp_levels: WAPP power levels are between 1.187 and 1.606 (still bad) 2008-Apr-25 02:40:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.262 2008-Apr-25 02:50:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:50:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:50:32 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Apr-25 02:50:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:50:32 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Apr-25 02:50:32 LOG1 fixed_driftmap: New position: year = 2008.3179149238217 RA = 16:37:49.0 RA/Dec = 16:38:09.8 +32:13:12.4 2008-Apr-25 02:50:32 NOTE fixed_driftmap: Correcting ZA to 13:51:58.7 ... 2008-Apr-25 02:50:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 13.8663126856 -CF 2008-Apr-25 02:50:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-25 02:50:32 START begin_task: Starting task 'WAPP calibration' 2008-Apr-25 02:50:32 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-25 02:50:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-25 02:50:32 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-25 02:50:32 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 02:50:32 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-25 02:50:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 02:50:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 02:50:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:50:32 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 02:50:32 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-25 02:50:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 13.8663126856 -CF 2008-Apr-25 02:50:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:50:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 02:50:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:50:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:50:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:50:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 02:50:32 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Apr-25 02:50:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 02:50:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:50:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 02:50:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:50:32 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-25 02:50:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:50:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:50:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:50:33 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:50:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 02:50:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:50:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:50:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:50:33 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:50:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:50:33 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:50:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:50:33 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 02:50:33 LOG5 finish_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-25 02:50:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:50:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 02:50:33 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:50:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:50:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:50:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:50:33 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:50:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:50:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:50:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:50:33 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-25 02:50:33 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-25 02:50:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:50:33 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-25 02:50:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:50:33 INFO2 take_spectra: Starting WAPP scan: 811600032 2008-Apr-25 02:50:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-25 02:50:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:50:33 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-25 02:50:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:50:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24634.00 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:50:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-25 02:50:35 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Apr-25 02:50:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-25 02:50:35 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Apr-25 02:50:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:50:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:50:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:50:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:50:35 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-25 02:50:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:50:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:50:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:50:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:50:35 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Apr-25 02:50:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 02:50:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-25 02:50:35 LOG5 finish_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-25 02:50:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-25 02:50:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:50:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-25 02:50:35 LOG5 end_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2008-Apr-25 02:50:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Apr-25 02:50:35 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Apr-25 02:50:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:50:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:50:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:50:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:50:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-25 02:50:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-25 02:50:36 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-25 02:50:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-25 02:50:36 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Apr-25 02:50:36 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-25 02:50:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-25 02:50:36 INFO2 take_spectra: Starting WAPP scan: 811600033 2008-Apr-25 02:50:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-25 02:50:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-25 02:50:36 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Apr-25 02:50:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:50:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.611 > 1.4)! 2008-Apr-25 02:50:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.257 1.611 1.188 1.491 2008-Apr-25 02:50:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.417 1.331 1.348 1.467 2008-Apr-25 02:50:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.281 1.370 1.368 1.531 2008-Apr-25 02:50:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.446 1.470 1.267 1.305 2008-Apr-25 02:50:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:50:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24637.00 2008-Apr-25 02:50:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0016.fits 2008-Apr-25 02:50:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0016.fits} 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:50:38 INFO5 check_wapp_levels: WAPP power levels are between 1.188 and 1.611 (still bad) 2008-Apr-25 02:50:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.886 and 1.265 2008-Apr-25 02:50:45 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Apr-25 02:50:45 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Apr-25 02:50:45 WARNING abort_task: WARNING abort requested! 2008-Apr-25 02:50:45 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Apr-25 02:50:45 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Apr-25 02:50:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Apr-25 02:50:45 LOG5 end_task: Level: (3) ID = <10232> Status = 1 0 0 0 abort 2008-Apr-25 02:50:45 START begin_task: Starting task 'stopping the WAPPs' 2008-Apr-25 02:50:45 LOG5 begin_task: Level: (3) ID = <10233> Status = 1 0 0 0 abort 2008-Apr-25 02:50:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Apr-25 02:50:45 INFO1 stop_wapp: Stopping the WAPPs 2008-Apr-25 02:50:45 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Apr-25 02:50:45 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Apr-25 02:50:45 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Apr-25 02:50:45 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Apr-25 02:50:46 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Apr-25 02:50:46 LOG5 begin_task: Level: (4) ID = <10234> Status = 1 0 0 0 abort 2008-Apr-25 02:50:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Apr-25 02:50:47 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Apr-25 02:50:47 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Apr-25 02:50:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:50:47 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Apr-25 02:50:47 LOG5 end_task: Level: (4) ID = <10234> Status = 1 0 0 0 abort 2008-Apr-25 02:50:47 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Apr-25 02:50:47 LOG5 end_task: Level: (3) ID = <10233> Status = 1 0 0 0 abort 2008-Apr-25 02:50:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Apr-25 02:50:47 LOG5 end_task: Level: (2) ID = <10231> Status = 1 0 0 0 abort 2008-Apr-25 02:50:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-25 02:50:47 LOG5 finish_task: Level: (1) ID = <10040> Status = 1 0 0 0 abort 2008-Apr-25 02:50:47 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Apr-25 02:50:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Apr-25 02:50:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Apr-25 02:50:47 LOG5 end_task: Level: (1) ID = <10040> Status = 1 0 0 0 abort 2008-Apr-25 02:50:50 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-25 02:50:50 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-25 02:50:50 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-25 02:50:50 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-25 02:50:50 LOG5 begin_task: Level: (1) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-25 02:50:50 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-25 02:50:50 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-25 02:50:50 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-25 02:50:50 LOG5 end_task: Level: (1) ID = <10235> Status = 0 0 0 0 ok 2008-Apr-25 02:50:50 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-25 02:50:50 LOG3 exec_msg: Closing socket 2008-Apr-25 02:50:50 LOG3 exec_msg: Closing socket 2008-Apr-25 02:50:50 LOG3 exec_msg: Closing socket 2008-Apr-25 02:50:50 LOG3 exec_msg: Closing socket 2008-Apr-25 02:50:53 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-25 02:50:53 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-25 02:50:53 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-25 02:50:53 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-25 02:51:03 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-Apr-25 02:51:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-Apr-25 02:51:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-Apr-25 02:51:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-Apr-25 02:51:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Apr-25 02:51:03 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-25 02:51:03 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-Apr-25 02:51:03 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-Apr-25 02:51:03 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-Apr-25 02:51:03 LOG5 begin_task: Level: (1) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-25 02:51:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-Apr-25 02:51:03 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-Apr-25 02:51:03 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-Apr-25 02:51:03 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 02:51:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-25 02:51:04 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-25 02:51:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-25 02:51:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-25 02:51:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 02:51:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-25 02:51:06 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-25 02:51:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-25 02:51:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-25 02:51:06 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-25 02:51:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:51:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:51:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:51:06 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-25 02:51:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:51:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:51:06 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Apr-25 02:51:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:51:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:51:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-25 02:51:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-25 02:51:06 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-25 02:51:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-25 02:51:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-25 02:51:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-25 02:51:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-25 02:51:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:06 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-25 02:51:06 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-25 02:51:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-25 02:51:07 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-25 02:51:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-25 02:51:07 LOG5 finish_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-25 02:51:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 02:51:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-25 02:51:07 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-25 02:51:07 LOG5 begin_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-25 02:51:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-25 02:51:07 START begin_task: Starting task 'selecting calibration port' 2008-Apr-25 02:51:07 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-25 02:51:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-25 02:51:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:07 START begin_task: Starting task 'waiting on calport' 2008-Apr-25 02:51:07 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:51:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-25 02:51:07 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-25 02:51:07 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-25 02:51:07 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-25 02:51:07 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-25 02:51:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:51:08 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-25 02:51:08 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-25 02:51:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-25 02:51:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:51:08 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-25 02:51:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-25 02:51:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:51:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:51:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:51:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:51:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:51:08 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-25 02:51:08 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-25 02:51:08 LOG5 finish_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-25 02:51:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 02:51:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-25 02:51:08 LOG5 end_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-Apr-25 02:51:08 BEGIN begin_task: Starting task 'tracking current position' 2008-Apr-25 02:51:08 LOG5 begin_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Apr-25 02:51:08 INFO1 execute_trackcurpos: Starting to track the current commanded position RA = 16:38:24.1 and Dec = +32:14:30.2 2008-Apr-25 02:51:08 LOG3 track_source: Calling 'track_source Cur-pos 163824.1 321430.2 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-25 02:51:08 START begin_task: Starting task 'sending tracking commands' 2008-Apr-25 02:51:08 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Apr-25 02:51:08 INFO1 track_source: Starting to track Cur-pos 2008-Apr-25 02:51:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-25 02:51:08 LOG3 vw_send: To DATATAKING: set ra 163824.1 2008-Apr-25 02:51:08 LOG3 vw_send: To DATATAKING: set dec 321430.2 2008-Apr-25 02:51:08 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-25 02:51:08 LOG3 vw_send: To DATATAKING: pnt tr 163824.1 321430.2 -CJ 2008-Apr-25 02:51:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-25 02:51:08 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-25 02:51:08 LOG5 finish_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-25 02:51:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:51:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-25 02:51:08 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 START begin_task: Starting task 'waiting on telescope' 2008-Apr-25 02:51:08 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-25 02:51:08 LOG3 waittrk: Start waittrk 5 2008-Apr-25 02:51:08 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-25 02:51:08 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-25 02:51:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-25 02:51:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-25 02:51:08 LOG4 got_cormsg: From DATATAKING: set ra 163824.1 2008-Apr-25 02:51:08 LOG4 got_cormsg: From DATATAKING: set dec 321430.2 2008-Apr-25 02:51:08 LOG4 got_cormsg: From DATATAKING: vw% 163824.1 2008-Apr-25 02:51:09 LOG4 got_cormsg: From DATATAKING: vw% 321430.2 2008-Apr-25 02:51:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-25 02:51:09 LOG4 got_cormsg: From DATATAKING: pnt tr 163824.1 321430.2 -CJ 2008-Apr-25 02:51:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-25 02:51:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-25 02:51:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-25 02:51:13 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Apr-25 02:51:13 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-25 02:51:13 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-25 02:51:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-25 02:51:18 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Apr-25 02:51:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-25 02:51:18 INFO2 waittrk: Now tracking Cur-pos 2008-Apr-25 02:51:18 LOG4 waittrk: Current telescope position: Az = 179.56 ZA = 13.90 2008-Apr-25 02:51:18 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-25 02:51:18 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-25 02:51:18 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-25 02:51:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:51:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-25 02:51:18 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Apr-25 02:51:18 STOP finish_task: Finishing task 'tracking current position' 2008-Apr-25 02:51:18 LOG5 finish_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-25 02:51:18 DONE finish_task: DONE finished tracking: current position 2008-Apr-25 02:51:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 02:51:18 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Apr-25 02:51:18 LOG5 end_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2008-Apr-25 02:51:18 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-25 02:51:18 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-25 02:51:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-25 02:51:18 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-25 02:51:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-25 02:51:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-25 02:51:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-25 02:51:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-25 02:51:18 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-25 02:51:18 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-25 02:51:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-25 02:51:19 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-25 02:51:19 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-25 02:51:19 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Apr-25 02:51:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-25 02:51:19 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-25 02:51:19 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-25 02:51:19 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-25 02:51:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 02:51:19 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-25 02:51:19 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2008-Apr-25 02:51:19 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Apr-25 02:51:19 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-25 02:51:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-25 02:51:20 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Apr-25 02:51:20 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-25 02:51:20 LOG5 begin_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Apr-25 02:51:20 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-25 02:51:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-25 02:51:20 START begin_task: Starting task 'selecting calibration type' 2008-Apr-25 02:51:20 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-25 02:51:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-25 02:51:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:20 START begin_task: Starting task 'waiting on setcal' 2008-Apr-25 02:51:20 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-25 02:51:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:51:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-25 02:51:20 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-25 02:51:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:51:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-25 02:51:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:51:20 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:51:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:51:20 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:51:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-25 02:51:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-25 02:51:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:51:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-25 02:51:20 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-25 02:51:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-25 02:51:20 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-25 02:51:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-25 02:51:20 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-25 02:51:20 LOG5 finish_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-25 02:51:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:51:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-25 02:51:20 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Apr-25 02:51:20 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-25 02:51:20 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-25 02:51:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:51:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:51:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:51:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:51:20 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-25 02:51:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Apr-25 02:51:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:51:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:51:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:51:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:51:21 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Apr-25 02:51:21 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-25 02:51:21 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 02:51:21 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-25 02:51:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-25 02:51:21 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-25 02:51:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-25 02:51:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-25 02:51:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:21 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-25 02:51:21 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-25 02:51:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-25 02:51:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-25 02:51:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20080425.a2010.0017.fits 2008-Apr-25 02:51:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080425.a2010.0017.fits} 2008-Apr-25 02:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-25 02:51:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-25 02:51:24 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Apr-25 02:51:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-25 02:51:24 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-25 02:51:24 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-25 02:51:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-25 02:51:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 02:51:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 02:51:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 02:51:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-25 02:51:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-25 02:51:24 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-25 02:51:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-25 02:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 1 dB --- beam 1: 8 7 dB 2008-Apr-25 02:51:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-25 02:51:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-25 02:51:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 3 3 dB 2008-Apr-25 02:51:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-25 02:51:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-25 02:51:25 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2008-Apr-25 02:51:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.899 0.980 ALFA beam 1: 0.884 0.898 2008-Apr-25 02:51:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.043 0.974 ALFA beam 3: 0.975 1.053 2008-Apr-25 02:51:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.905 0.963 ALFA beam 5: 0.986 0.896 2008-Apr-25 02:51:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.016 1.034 ALFA beam 7: 0.897 0.920 2008-Apr-25 02:51:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 02:51:25 LOG5 finish_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-25 02:51:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-25 02:51:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:51:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 02:51:25 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Apr-25 02:51:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-25 02:51:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-25 02:51:25 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-25 02:51:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-25 02:51:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-25 02:51:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-25 02:51:25 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Apr-25 02:51:25 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Apr-25 02:51:25 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Apr-25 02:51:25 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-25 02:51:25 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:51:25 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:51:25 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:51:25 LOG2 antvel: Parameters to Doppler: Topocentric 24684 2008 116 0.0 2008-Apr-25 02:51:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:51:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-25 02:51:25 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-25 02:51:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:51:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:51:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:51:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:51:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:51:25 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-25 02:51:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:51:25 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.650394 2008.3179165716024 18.999933 2008-Apr-25 02:51:25 LOG4 log_alfabeam: ALFABEAM 0 16.640027777778755 32.241722222222222 2008-Apr-25 02:51:25 LOG4 log_alfabeam: ALFABEAM 1 16.641426811419471 32.137078332173175 2008-Apr-25 02:51:25 LOG4 log_alfabeam: ALFABEAM 2 16.646832530142799 32.207067858343116 2008-Apr-25 02:51:25 LOG4 log_alfabeam: ALFABEAM 3 16.645472110496431 32.311810300729320 2008-Apr-25 02:51:25 LOG4 log_alfabeam: ALFABEAM 4 16.638605155505768 32.346339957388921 2008-Apr-25 02:51:25 LOG4 log_alfabeam: ALFABEAM 5 16.633184609166815 32.275764331036100 2008-Apr-25 02:51:25 LOG4 log_alfabeam: ALFABEAM 6 16.634645720981563 32.171248881282679 2008-Apr-25 02:51:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600034 2008-Apr-25 02:51:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:51:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:51:26 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-25 02:51:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:51:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:51:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24687.00 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:51:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:51:37 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Apr-25 02:51:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:51:37 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Apr-25 02:51:37 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Apr-25 02:51:37 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Apr-25 02:51:37 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-25 02:51:37 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:51:37 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:51:37 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:51:37 LOG2 antvel: Parameters to Doppler: Topocentric 24697 2008 116 0.0 2008-Apr-25 02:51:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:51:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-25 02:51:37 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-25 02:51:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:51:37 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:51:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:51:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:51:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:51:37 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-25 02:51:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:51:37 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.654015 2008.3179169835475 18.999933 2008-Apr-25 02:51:37 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777789 32.241722222222222 2008-Apr-25 02:51:37 LOG4 log_alfabeam: ALFABEAM 1 16.641457719320123 32.137145677549015 2008-Apr-25 02:51:37 LOG4 log_alfabeam: ALFABEAM 2 16.646842741292190 32.207392088470698 2008-Apr-25 02:51:37 LOG4 log_alfabeam: ALFABEAM 3 16.645451331879489 32.312069019985330 2008-Apr-25 02:51:37 LOG4 log_alfabeam: ALFABEAM 4 16.638574185823391 32.346271488033913 2008-Apr-25 02:51:37 LOG4 log_alfabeam: ALFABEAM 5 16.633174597033261 32.275438289679222 2008-Apr-25 02:51:37 LOG4 log_alfabeam: ALFABEAM 6 16.634666594803321 32.170993137484601 2008-Apr-25 02:51:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600035 2008-Apr-25 02:51:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:51:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:51:38 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-25 02:51:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:51:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:51:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24699.00 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:51:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:51:49 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2008-Apr-25 02:51:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:51:49 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Apr-25 02:51:49 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Apr-25 02:51:49 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Apr-25 02:51:49 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-25 02:51:49 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:51:49 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:51:49 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:51:49 LOG2 antvel: Parameters to Doppler: Topocentric 24709 2008 116 0.0 2008-Apr-25 02:51:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:51:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-25 02:51:49 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-25 02:51:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:51:49 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:51:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:51:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:51:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:51:49 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-25 02:51:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:51:49 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.657358 2008.3179173638046 18.999933 2008-Apr-25 02:51:49 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777863 32.241722222222222 2008-Apr-25 02:51:49 LOG4 log_alfabeam: ALFABEAM 1 16.641486235071177 32.137209155269446 2008-Apr-25 02:51:49 LOG4 log_alfabeam: ALFABEAM 2 16.646852083072229 32.207691842736573 2008-Apr-25 02:51:49 LOG4 log_alfabeam: ALFABEAM 3 16.645432081272087 32.312306985597594 2008-Apr-25 02:51:49 LOG4 log_alfabeam: ALFABEAM 4 16.638545613689981 32.346206970383086 2008-Apr-25 02:51:49 LOG4 log_alfabeam: ALFABEAM 5 16.633165440021003 32.275136877904721 2008-Apr-25 02:51:49 LOG4 log_alfabeam: ALFABEAM 6 16.634685931580659 32.170757926456155 2008-Apr-25 02:51:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600036 2008-Apr-25 02:51:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:51:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:51:50 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-25 02:51:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:51:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:51:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:51:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24711.00 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:52:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:52:01 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2008-Apr-25 02:52:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:52:01 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Apr-25 02:52:01 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Apr-25 02:52:01 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Apr-25 02:52:01 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-25 02:52:01 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:52:01 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:52:01 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:52:01 LOG2 antvel: Parameters to Doppler: Topocentric 24721 2008 116 0.0 2008-Apr-25 02:52:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:52:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-25 02:52:01 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-25 02:52:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:52:01 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:52:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:52:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:52:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:52:01 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-25 02:52:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:52:01 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.660700 2008.3179177440616 18.999933 2008-Apr-25 02:52:01 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777863 32.241722222222222 2008-Apr-25 02:52:01 LOG4 log_alfabeam: ALFABEAM 1 16.641514722923365 32.137273861879493 2008-Apr-25 02:52:01 LOG4 log_alfabeam: ALFABEAM 2 16.646861339795560 32.207991897348741 2008-Apr-25 02:52:01 LOG4 log_alfabeam: ALFABEAM 3 16.645412772525116 32.312544017639539 2008-Apr-25 02:52:01 LOG4 log_alfabeam: ALFABEAM 4 16.638517070107088 32.346141222070592 2008-Apr-25 02:52:01 LOG4 log_alfabeam: ALFABEAM 5 16.633156368987969 32.274835180461338 2008-Apr-25 02:52:01 LOG4 log_alfabeam: ALFABEAM 6 16.634705324812920 32.170523655247287 2008-Apr-25 02:52:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600037 2008-Apr-25 02:52:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:52:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:52:02 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-25 02:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:52:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:52:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24723.00 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:52:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:52:13 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Apr-25 02:52:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:52:13 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Apr-25 02:52:13 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Apr-25 02:52:13 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Apr-25 02:52:13 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-25 02:52:13 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:52:13 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:52:13 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:52:13 LOG2 antvel: Parameters to Doppler: Topocentric 24733 2008 116 0.0 2008-Apr-25 02:52:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:52:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-25 02:52:13 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-25 02:52:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:52:13 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:52:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:52:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:52:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:52:13 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-25 02:52:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:52:13 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.664042 2008.3179181243186 18.999933 2008-Apr-25 02:52:13 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777782 32.241722222222222 2008-Apr-25 02:52:13 LOG4 log_alfabeam: ALFABEAM 1 16.641543190505022 32.137339813827630 2008-Apr-25 02:52:13 LOG4 log_alfabeam: ALFABEAM 2 16.646870513990415 32.208292332273608 2008-Apr-25 02:52:13 LOG4 log_alfabeam: ALFABEAM 3 16.645393400520451 32.312780180025946 2008-Apr-25 02:52:13 LOG4 log_alfabeam: ALFABEAM 4 16.638488547430892 32.346074226405690 2008-Apr-25 02:52:13 LOG4 log_alfabeam: ALFABEAM 5 16.633147381447156 32.274533116988351 2008-Apr-25 02:52:13 LOG4 log_alfabeam: ALFABEAM 6 16.634724779638727 32.170290260583897 2008-Apr-25 02:52:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600038 2008-Apr-25 02:52:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:52:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:52:14 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-25 02:52:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:52:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:52:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24735.00 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:52:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:52:25 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Apr-25 02:52:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:52:25 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2008-Apr-25 02:52:25 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Apr-25 02:52:25 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Apr-25 02:52:25 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-25 02:52:25 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:52:25 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:52:25 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:52:25 LOG2 antvel: Parameters to Doppler: Topocentric 24745 2008 116 0.0 2008-Apr-25 02:52:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:52:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-25 02:52:25 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-25 02:52:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:52:25 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:52:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:52:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:52:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:52:25 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-25 02:52:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:52:25 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.667385 2008.3179185045758 18.999933 2008-Apr-25 02:52:25 LOG4 log_alfabeam: ALFABEAM 0 16.640027777778059 32.241722222222236 2008-Apr-25 02:52:25 LOG4 log_alfabeam: ALFABEAM 1 16.641571645424516 32.137407028939634 2008-Apr-25 02:52:25 LOG4 log_alfabeam: ALFABEAM 2 16.646879608094551 32.208593227900586 2008-Apr-25 02:52:25 LOG4 log_alfabeam: ALFABEAM 3 16.645373960068820 32.313015535712502 2008-Apr-25 02:52:25 LOG4 log_alfabeam: ALFABEAM 4 16.638460038041565 32.346005965318277 2008-Apr-25 02:52:25 LOG4 log_alfabeam: ALFABEAM 5 16.633138475005790 32.274230606717509 2008-Apr-25 02:52:25 LOG4 log_alfabeam: ALFABEAM 6 16.634744301266512 32.170057680158550 2008-Apr-25 02:52:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600039 2008-Apr-25 02:52:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:52:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:52:26 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-25 02:52:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:52:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:52:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24747.00 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:52:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:52:37 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Apr-25 02:52:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:52:37 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Apr-25 02:52:37 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Apr-25 02:52:37 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Apr-25 02:52:37 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-25 02:52:37 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:52:37 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:52:37 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:52:37 LOG2 antvel: Parameters to Doppler: Topocentric 24757 2008 116 0.0 2008-Apr-25 02:52:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:52:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-25 02:52:37 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-25 02:52:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:52:37 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:52:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:52:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:52:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:52:37 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-25 02:52:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:52:37 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.670727 2008.3179188848328 18.999933 2008-Apr-25 02:52:37 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777775 32.241722222222236 2008-Apr-25 02:52:37 LOG4 log_alfabeam: ALFABEAM 1 16.641600069758699 32.137475464423417 2008-Apr-25 02:52:37 LOG4 log_alfabeam: ALFABEAM 2 16.646888616403793 32.208894394508683 2008-Apr-25 02:52:37 LOG4 log_alfabeam: ALFABEAM 3 16.645354463442231 32.313249936660370 2008-Apr-25 02:52:37 LOG4 log_alfabeam: ALFABEAM 4 16.638431559897487 32.345936482295350 2008-Apr-25 02:52:37 LOG4 log_alfabeam: ALFABEAM 5 16.633129655242239 32.273927840435725 2008-Apr-25 02:52:37 LOG4 log_alfabeam: ALFABEAM 6 16.634763877370549 32.169826060165931 2008-Apr-25 02:52:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600040 2008-Apr-25 02:52:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:52:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:52:38 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-25 02:52:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:52:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:52:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24759.00 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:52:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:52:49 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Apr-25 02:52:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:52:49 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Apr-25 02:52:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:52:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:52:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:52:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:52:49 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-25 02:52:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:52:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:52:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:52:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:52:49 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Apr-25 02:52:49 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Apr-25 02:52:49 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Apr-25 02:52:49 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-25 02:52:49 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:52:49 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:52:49 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:52:49 LOG2 antvel: Parameters to Doppler: Topocentric 24769 2008 116 0.0 2008-Apr-25 02:52:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:52:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-25 02:52:49 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-25 02:52:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:52:49 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:52:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:52:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:52:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:52:49 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-25 02:52:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:52:49 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.674070 2008.3179192650898 18.999933 2008-Apr-25 02:52:49 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777732 32.241722222222236 2008-Apr-25 02:52:49 LOG4 log_alfabeam: ALFABEAM 1 16.641628479621897 32.137545158540561 2008-Apr-25 02:52:49 LOG4 log_alfabeam: ALFABEAM 2 16.646897544054188 32.209196002590559 2008-Apr-25 02:52:49 LOG4 log_alfabeam: ALFABEAM 3 16.645334899620721 32.313483515992807 2008-Apr-25 02:52:49 LOG4 log_alfabeam: ALFABEAM 4 16.638403096856656 32.345865738517539 2008-Apr-25 02:52:49 LOG4 log_alfabeam: ALFABEAM 5 16.633120917121254 32.273624646791070 2008-Apr-25 02:52:49 LOG4 log_alfabeam: ALFABEAM 6 16.634783519014793 32.169595268962411 2008-Apr-25 02:52:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600041 2008-Apr-25 02:52:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:52:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:52:50 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-25 02:52:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:52:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:52:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:52:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:52:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24771.00 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:52:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.491 > 1.4)! 2008-Apr-25 02:52:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.295 1.285 1.231 1.221 2008-Apr-25 02:52:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.433 1.369 1.401 1.491 2008-Apr-25 02:52:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.322 1.396 1.447 1.235 2008-Apr-25 02:52:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.460 1.476 1.280 1.310 2008-Apr-25 02:52:55 INFO5 check_wapp_levels: WAPP power levels are between 1.219 and 1.492 (still bad) 2008-Apr-25 02:52:57 INFO5 check_wapp_levels: WAPP power levels are between 1.220 and 1.491 (still bad) 2008-Apr-25 02:52:59 INFO5 check_wapp_levels: WAPP power levels are between 1.218 and 1.492 (still bad) 2008-Apr-25 02:53:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:53:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:53:01 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Apr-25 02:53:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:53:01 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Apr-25 02:53:01 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Apr-25 02:53:01 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Apr-25 02:53:01 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-25 02:53:01 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:53:01 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:53:01 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:53:01 LOG2 antvel: Parameters to Doppler: Topocentric 24781 2008 116 0.0 2008-Apr-25 02:53:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:53:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-25 02:53:01 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-25 02:53:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:53:01 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:53:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:53:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:53:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:53:01 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-25 02:53:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:53:01 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.677412 2008.3179196453468 18.999933 2008-Apr-25 02:53:01 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777721 32.241722222222236 2008-Apr-25 02:53:01 LOG4 log_alfabeam: ALFABEAM 1 16.641656857122925 32.137616066791573 2008-Apr-25 02:53:01 LOG4 log_alfabeam: ALFABEAM 2 16.646906385456766 32.209497861942580 2008-Apr-25 02:53:01 LOG4 log_alfabeam: ALFABEAM 3 16.645315280960677 32.313716126902989 2008-Apr-25 02:53:01 LOG4 log_alfabeam: ALFABEAM 4 16.638374666844623 32.345793779181911 2008-Apr-25 02:53:01 LOG4 log_alfabeam: ALFABEAM 5 16.633112266105044 32.273321217032077 2008-Apr-25 02:53:01 LOG4 log_alfabeam: ALFABEAM 6 16.634803213791756 32.169365451501683 2008-Apr-25 02:53:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600042 2008-Apr-25 02:53:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:53:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:53:02 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-25 02:53:02 INFO5 check_wapp_levels: WAPP power levels are between 1.219 and 1.492 (still bad) 2008-Apr-25 02:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:53:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:53:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24783.00 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:04 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.485 (still bad) 2008-Apr-25 02:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:06 INFO5 check_wapp_levels: WAPP power levels are between 1.215 and 1.485 (still bad) 2008-Apr-25 02:53:08 INFO5 check_wapp_levels: WAPP power levels are between 1.215 and 1.485 (still bad) 2008-Apr-25 02:53:10 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.484 (still bad) 2008-Apr-25 02:53:12 INFO5 check_wapp_levels: WAPP power levels are between 1.215 and 1.485 (still bad) 2008-Apr-25 02:53:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:53:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:53:13 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Apr-25 02:53:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:53:13 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2008-Apr-25 02:53:13 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Apr-25 02:53:13 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Apr-25 02:53:13 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-25 02:53:13 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:53:13 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:53:13 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:53:13 LOG2 antvel: Parameters to Doppler: Topocentric 24793 2008 116 0.0 2008-Apr-25 02:53:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:53:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-25 02:53:13 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-25 02:53:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:53:13 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:53:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:53:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:53:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:53:13 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-25 02:53:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:53:13 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.680755 2008.3179200256038 18.999933 2008-Apr-25 02:53:13 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777863 32.241722222222208 2008-Apr-25 02:53:13 LOG4 log_alfabeam: ALFABEAM 1 16.641685218352823 32.137688228694515 2008-Apr-25 02:53:13 LOG4 log_alfabeam: ALFABEAM 2 16.646915145663080 32.209800143418683 2008-Apr-25 02:53:13 LOG4 log_alfabeam: ALFABEAM 3 16.645295596379501 32.313947901614391 2008-Apr-25 02:53:13 LOG4 log_alfabeam: ALFABEAM 4 16.638346253742466 32.345720564210914 2008-Apr-25 02:53:13 LOG4 log_alfabeam: ALFABEAM 5 16.633103697243687 32.273017379459219 2008-Apr-25 02:53:13 LOG4 log_alfabeam: ALFABEAM 6 16.634822972825820 32.169136477046003 2008-Apr-25 02:53:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600043 2008-Apr-25 02:53:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:53:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:53:14 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-25 02:53:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:53:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:53:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:14 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.485 (still bad) 2008-Apr-25 02:53:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24795.00 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:16 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.482 (still bad) 2008-Apr-25 02:53:18 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.483 (still bad) 2008-Apr-25 02:53:20 INFO5 check_wapp_levels: WAPP power levels are between 1.213 and 1.483 (still bad) 2008-Apr-25 02:53:22 INFO5 check_wapp_levels: WAPP power levels are between 1.215 and 1.485 (still bad) 2008-Apr-25 02:53:24 INFO5 check_wapp_levels: WAPP power levels are between 1.213 and 1.483 (still bad) 2008-Apr-25 02:53:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:53:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:53:25 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Apr-25 02:53:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:53:25 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Apr-25 02:53:25 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Apr-25 02:53:25 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Apr-25 02:53:25 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-25 02:53:25 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:53:25 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:53:25 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:53:25 LOG2 antvel: Parameters to Doppler: Topocentric 24805 2008 116 0.0 2008-Apr-25 02:53:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:53:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-25 02:53:25 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-25 02:53:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:53:25 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:53:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:53:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:53:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:53:25 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-25 02:53:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:53:25 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.684097 2008.3179204058611 18.999933 2008-Apr-25 02:53:25 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777849 32.241722222222222 2008-Apr-25 02:53:25 LOG4 log_alfabeam: ALFABEAM 1 16.641713545455200 32.137761598051256 2008-Apr-25 02:53:25 LOG4 log_alfabeam: ALFABEAM 2 16.646923819199607 32.210102656362132 2008-Apr-25 02:53:25 LOG4 log_alfabeam: ALFABEAM 3 16.645275858315916 32.314178694573236 2008-Apr-25 02:53:25 LOG4 log_alfabeam: ALFABEAM 4 16.638317875440070 32.345646140502460 2008-Apr-25 02:53:25 LOG4 log_alfabeam: ALFABEAM 5 16.633095215882051 32.272713325752484 2008-Apr-25 02:53:25 LOG4 log_alfabeam: ALFABEAM 6 16.634842783629345 32.168908489287411 2008-Apr-25 02:53:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600044 2008-Apr-25 02:53:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:53:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:53:26 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-25 02:53:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:53:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:53:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24807.00 2008-Apr-25 02:53:27 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.483 (still bad) 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:29 INFO5 check_wapp_levels: WAPP power levels are between 1.203 and 1.477 (still bad) 2008-Apr-25 02:53:31 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.477 (still bad) 2008-Apr-25 02:53:33 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 1.477 (still bad) 2008-Apr-25 02:53:35 INFO5 check_wapp_levels: WAPP power levels are between 1.204 and 1.477 (still bad) 2008-Apr-25 02:53:37 INFO5 check_wapp_levels: WAPP power levels are between 1.205 and 1.476 (still bad) 2008-Apr-25 02:53:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:53:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:53:37 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Apr-25 02:53:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:53:37 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Apr-25 02:53:37 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Apr-25 02:53:37 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Apr-25 02:53:37 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-25 02:53:37 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:53:37 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:53:37 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:53:37 LOG2 antvel: Parameters to Doppler: Topocentric 24817 2008 116 0.0 2008-Apr-25 02:53:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:53:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-25 02:53:37 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-25 02:53:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:53:37 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:53:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:53:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:53:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:53:37 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-25 02:53:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:53:37 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.687440 2008.3179207861181 18.999933 2008-Apr-25 02:53:37 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777831 32.241722222222236 2008-Apr-25 02:53:37 LOG4 log_alfabeam: ALFABEAM 1 16.641741854496793 32.137836215631694 2008-Apr-25 02:53:37 LOG4 log_alfabeam: ALFABEAM 2 16.646932411033298 32.210405571971002 2008-Apr-25 02:53:37 LOG4 log_alfabeam: ALFABEAM 3 16.645256055626099 32.314408637090722 2008-Apr-25 02:53:37 LOG4 log_alfabeam: ALFABEAM 4 16.638289515843940 32.345570466725697 2008-Apr-25 02:53:37 LOG4 log_alfabeam: ALFABEAM 5 16.633086817155931 32.272408883882143 2008-Apr-25 02:53:37 LOG4 log_alfabeam: ALFABEAM 6 16.634862657386741 32.168681358406459 2008-Apr-25 02:53:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600045 2008-Apr-25 02:53:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:53:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:53:38 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-25 02:53:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:53:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:53:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24819.00 2008-Apr-25 02:53:39 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.477 (still bad) 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:41 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.472 (still bad) 2008-Apr-25 02:53:43 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.473 (still bad) 2008-Apr-25 02:53:45 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.473 (still bad) 2008-Apr-25 02:53:47 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.475 (still bad) 2008-Apr-25 02:53:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:53:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:53:49 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Apr-25 02:53:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:53:49 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Apr-25 02:53:49 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Apr-25 02:53:49 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Apr-25 02:53:49 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-25 02:53:49 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:53:49 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:53:49 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:53:49 LOG2 antvel: Parameters to Doppler: Topocentric 24829 2008 116 0.0 2008-Apr-25 02:53:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:53:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-25 02:53:49 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-25 02:53:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:53:49 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:53:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:53:49 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-25 02:53:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:53:49 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.690782 2008.3179211663751 18.999933 2008-Apr-25 02:53:49 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777846 32.241722222222236 2008-Apr-25 02:53:49 LOG4 log_alfabeam: ALFABEAM 1 16.641770127658667 32.137912033548723 2008-Apr-25 02:53:49 LOG4 log_alfabeam: ALFABEAM 2 16.646940915807342 32.210708699165238 2008-Apr-25 02:53:49 LOG4 log_alfabeam: ALFABEAM 3 16.645236200829356 32.314637584886626 2008-Apr-25 02:53:49 LOG4 log_alfabeam: ALFABEAM 4 16.638261192805629 32.345493591469598 2008-Apr-25 02:53:49 LOG4 log_alfabeam: ALFABEAM 5 16.633078506292915 32.272104245929604 2008-Apr-25 02:53:49 LOG4 log_alfabeam: ALFABEAM 6 16.634882581532388 32.168455226813670 2008-Apr-25 02:53:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600046 2008-Apr-25 02:53:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:53:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:53:50 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-25 02:53:50 INFO5 check_wapp_levels: WAPP power levels are between 1.183 and 1.474 (still bad) 2008-Apr-25 02:53:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:53:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:53:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:53:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:53:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24831.00 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:53:52 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.473 (still bad) 2008-Apr-25 02:53:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.471 > 1.4)! 2008-Apr-25 02:53:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.249 1.270 1.179 1.198 2008-Apr-25 02:53:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.412 1.323 1.337 1.461 2008-Apr-25 02:53:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.368 1.349 1.190 2008-Apr-25 02:53:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.446 1.471 1.268 1.307 2008-Apr-25 02:53:56 INFO5 check_wapp_levels: WAPP power levels are between 1.178 and 1.472 (still bad) 2008-Apr-25 02:53:58 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.473 (still bad) 2008-Apr-25 02:54:00 INFO5 check_wapp_levels: WAPP power levels are between 1.180 and 1.471 (still bad) 2008-Apr-25 02:54:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:54:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:54:01 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2008-Apr-25 02:54:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:54:01 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Apr-25 02:54:01 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Apr-25 02:54:01 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Apr-25 02:54:01 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-25 02:54:01 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:54:01 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:54:01 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:54:01 LOG2 antvel: Parameters to Doppler: Topocentric 24841 2008 116 0.0 2008-Apr-25 02:54:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:54:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-25 02:54:01 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-25 02:54:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:54:01 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:54:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:54:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:54:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:54:01 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-25 02:54:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:54:01 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.694125 2008.3179215466321 18.999933 2008-Apr-25 02:54:01 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777782 32.241722222222222 2008-Apr-25 02:54:01 LOG4 log_alfabeam: ALFABEAM 1 16.641798380981481 32.137989093818867 2008-Apr-25 02:54:01 LOG4 log_alfabeam: ALFABEAM 2 16.646949338402990 32.211012209469864 2008-Apr-25 02:54:01 LOG4 log_alfabeam: ALFABEAM 3 16.645216282721584 32.314865668347323 2008-Apr-25 02:54:01 LOG4 log_alfabeam: ALFABEAM 4 16.638232890257981 32.345415472154997 2008-Apr-25 02:54:01 LOG4 log_alfabeam: ALFABEAM 5 16.633070278514399 32.271799239552081 2008-Apr-25 02:54:01 LOG4 log_alfabeam: ALFABEAM 6 16.634902567309187 32.168229965619830 2008-Apr-25 02:54:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600047 2008-Apr-25 02:54:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:54:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:54:02 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-25 02:54:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:54:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:54:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:02 INFO5 check_wapp_levels: WAPP power levels are between 1.179 and 1.472 (still bad) 2008-Apr-25 02:54:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24843.00 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:04 INFO5 check_wapp_levels: WAPP power levels are between 1.179 and 1.472 (still bad) 2008-Apr-25 02:54:06 INFO5 check_wapp_levels: WAPP power levels are between 1.179 and 1.472 (still bad) 2008-Apr-25 02:54:08 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 1.471 (still bad) 2008-Apr-25 02:54:10 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.471 (still bad) 2008-Apr-25 02:54:12 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.472 (still bad) 2008-Apr-25 02:54:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:54:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:54:13 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Apr-25 02:54:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:54:13 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Apr-25 02:54:13 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-25 02:54:13 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-25 02:54:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-25 02:54:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:54:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:54:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:54:13 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-25 02:54:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:54:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:54:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:54:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:54:13 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Apr-25 02:54:13 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-25 02:54:13 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Apr-25 02:54:13 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Apr-25 02:54:13 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-25 02:54:13 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:54:13 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:54:13 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:54:13 LOG2 antvel: Parameters to Doppler: Topocentric 24853 2008 116 0.0 2008-Apr-25 02:54:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:54:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-25 02:54:13 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-25 02:54:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:54:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:54:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:54:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:54:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:54:13 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-25 02:54:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:54:13 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.697467 2008.3179219268891 18.999933 2008-Apr-25 02:54:13 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777807 32.241722222222222 2008-Apr-25 02:54:13 LOG4 log_alfabeam: ALFABEAM 1 16.641826596686226 32.138067346876547 2008-Apr-25 02:54:13 LOG4 log_alfabeam: ALFABEAM 2 16.646957673580889 32.211315911411582 2008-Apr-25 02:54:13 LOG4 log_alfabeam: ALFABEAM 3 16.645196313900858 32.315092744486257 2008-Apr-25 02:54:13 LOG4 log_alfabeam: ALFABEAM 4 16.638204626011863 32.345336159051399 2008-Apr-25 02:54:13 LOG4 log_alfabeam: ALFABEAM 5 16.633062138929851 32.271494057202261 2008-Apr-25 02:54:13 LOG4 log_alfabeam: ALFABEAM 6 16.634922602075548 32.168005715934662 2008-Apr-25 02:54:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600048 2008-Apr-25 02:54:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:54:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:54:14 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-25 02:54:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:54:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:54:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24855.00 2008-Apr-25 02:54:14 INFO5 check_wapp_levels: WAPP power levels are between 1.177 and 1.472 (still bad) 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.921 and 1.194 2008-Apr-25 02:54:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:54:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:54:25 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Apr-25 02:54:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:54:25 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Apr-25 02:54:25 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Apr-25 02:54:25 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Apr-25 02:54:25 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-25 02:54:25 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:54:25 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:54:25 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:54:25 LOG2 antvel: Parameters to Doppler: Topocentric 24865 2008 116 0.0 2008-Apr-25 02:54:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:54:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-25 02:54:25 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-25 02:54:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:54:25 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:54:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:54:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:54:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:54:25 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-25 02:54:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:54:25 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.700810 2008.3179223071463 18.999933 2008-Apr-25 02:54:25 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777782 32.241722222222236 2008-Apr-25 02:54:25 LOG4 log_alfabeam: ALFABEAM 1 16.641854790786113 32.138146835979690 2008-Apr-25 02:54:25 LOG4 log_alfabeam: ALFABEAM 2 16.646965926136488 32.211619976824984 2008-Apr-25 02:54:25 LOG4 log_alfabeam: ALFABEAM 3 16.645176283103677 32.315318942752988 2008-Apr-25 02:54:25 LOG4 log_alfabeam: ALFABEAM 4 16.638176384028036 32.345255608336764 2008-Apr-25 02:54:25 LOG4 log_alfabeam: ALFABEAM 5 16.633054082847377 32.271188526241922 2008-Apr-25 02:54:25 LOG4 log_alfabeam: ALFABEAM 6 16.634942697131944 32.167782349811148 2008-Apr-25 02:54:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600049 2008-Apr-25 02:54:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:54:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:54:26 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-25 02:54:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:54:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:54:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24867.00 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:54:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:54:37 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Apr-25 02:54:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:54:37 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Apr-25 02:54:37 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Apr-25 02:54:37 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Apr-25 02:54:37 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-25 02:54:37 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:54:37 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:54:37 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:54:37 LOG2 antvel: Parameters to Doppler: Topocentric 24877 2008 116 0.0 2008-Apr-25 02:54:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:54:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-25 02:54:37 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-25 02:54:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:54:37 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:54:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:54:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:54:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:54:37 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-25 02:54:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:54:37 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.704152 2008.3179226874033 18.999933 2008-Apr-25 02:54:37 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777803 32.241722222222236 2008-Apr-25 02:54:37 LOG4 log_alfabeam: ALFABEAM 1 16.641882945544690 32.138227509895195 2008-Apr-25 02:54:37 LOG4 log_alfabeam: ALFABEAM 2 16.646974090947836 32.211924213873516 2008-Apr-25 02:54:37 LOG4 log_alfabeam: ALFABEAM 3 16.645156203004511 32.315544121473600 2008-Apr-25 02:54:37 LOG4 log_alfabeam: ALFABEAM 4 16.638148182073962 32.345173871949733 2008-Apr-25 02:54:37 LOG4 log_alfabeam: ALFABEAM 5 16.633046115257436 32.270882839464520 2008-Apr-25 02:54:37 LOG4 log_alfabeam: ALFABEAM 6 16.634962839762657 32.167560007039455 2008-Apr-25 02:54:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600050 2008-Apr-25 02:54:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:54:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:54:38 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-25 02:54:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:54:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:54:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24879.00 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:54:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:54:49 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Apr-25 02:54:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:54:49 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Apr-25 02:54:49 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Apr-25 02:54:49 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Apr-25 02:54:49 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-25 02:54:49 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:54:49 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:54:49 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:54:49 LOG2 antvel: Parameters to Doppler: Topocentric 24889 2008 116 0.0 2008-Apr-25 02:54:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:54:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-25 02:54:49 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-25 02:54:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:54:49 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:54:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:54:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:54:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:54:49 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-25 02:54:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:54:49 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.707494 2008.3179230676603 18.999933 2008-Apr-25 02:54:49 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777835 32.241722222222265 2008-Apr-25 02:54:49 LOG4 log_alfabeam: ALFABEAM 1 16.641911068535901 32.138309388437129 2008-Apr-25 02:54:49 LOG4 log_alfabeam: ALFABEAM 2 16.646982170319845 32.212228703537320 2008-Apr-25 02:54:49 LOG4 log_alfabeam: ALFABEAM 3 16.645136068314834 32.315768342201203 2008-Apr-25 02:54:49 LOG4 log_alfabeam: ALFABEAM 4 16.638120012564006 32.345090929829361 2008-Apr-25 02:54:49 LOG4 log_alfabeam: ALFABEAM 5 16.633038233900283 32.270576915527485 2008-Apr-25 02:54:49 LOG4 log_alfabeam: ALFABEAM 6 16.634983035273713 32.167338626723563 2008-Apr-25 02:54:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600051 2008-Apr-25 02:54:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:54:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:54:50 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-25 02:54:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:54:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:54:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:54:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:54:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24891.00 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:55:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:55:01 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-Apr-25 02:55:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:55:01 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Apr-25 02:55:01 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Apr-25 02:55:01 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Apr-25 02:55:01 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-25 02:55:01 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:55:01 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:55:01 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:55:01 LOG2 antvel: Parameters to Doppler: Topocentric 24901 2008 116 0.0 2008-Apr-25 02:55:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:55:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-25 02:55:01 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-25 02:55:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:55:01 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:55:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:55:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:55:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:55:01 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-25 02:55:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:55:01 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.710837 2008.3179234479173 18.999933 2008-Apr-25 02:55:01 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777814 32.241722222222236 2008-Apr-25 02:55:01 LOG4 log_alfabeam: ALFABEAM 1 16.641939167299139 32.138392492755983 2008-Apr-25 02:55:01 LOG4 log_alfabeam: ALFABEAM 2 16.646990166462928 32.212533527087189 2008-Apr-25 02:55:01 LOG4 log_alfabeam: ALFABEAM 3 16.645115873684926 32.315991665436705 2008-Apr-25 02:55:01 LOG4 log_alfabeam: ALFABEAM 4 16.638091867947427 32.345006760576766 2008-Apr-25 02:55:01 LOG4 log_alfabeam: ALFABEAM 5 16.633030436611229 32.270270672813716 2008-Apr-25 02:55:01 LOG4 log_alfabeam: ALFABEAM 6 16.635003289030085 32.167118149024404 2008-Apr-25 02:55:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600052 2008-Apr-25 02:55:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:55:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:55:02 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-25 02:55:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:55:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:55:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24903.00 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:55:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:55:13 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Apr-25 02:55:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:55:13 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Apr-25 02:55:13 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Apr-25 02:55:13 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Apr-25 02:55:13 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-25 02:55:13 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:55:13 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:55:13 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:55:13 LOG2 antvel: Parameters to Doppler: Topocentric 24913 2008 116 0.0 2008-Apr-25 02:55:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:55:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-25 02:55:13 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-25 02:55:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:55:13 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:55:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:55:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:55:13 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-25 02:55:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:55:13 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.714179 2008.3179238281743 18.999933 2008-Apr-25 02:55:13 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777810 32.241722222222236 2008-Apr-25 02:55:13 LOG4 log_alfabeam: ALFABEAM 1 16.641967224167061 32.138476769140070 2008-Apr-25 02:55:13 LOG4 log_alfabeam: ALFABEAM 2 16.646998074432599 32.212838492198330 2008-Apr-25 02:55:13 LOG4 log_alfabeam: ALFABEAM 3 16.645095631899924 32.316213951510086 2008-Apr-25 02:55:13 LOG4 log_alfabeam: ALFABEAM 4 16.638063765921419 32.344921418611293 2008-Apr-25 02:55:13 LOG4 log_alfabeam: ALFABEAM 5 16.633022728201837 32.269964304571090 2008-Apr-25 02:55:13 LOG4 log_alfabeam: ALFABEAM 6 16.635023588209624 32.166898711719618 2008-Apr-25 02:55:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600053 2008-Apr-25 02:55:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:55:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:55:14 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-25 02:55:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24915.00 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:55:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:55:25 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Apr-25 02:55:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:55:25 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Apr-25 02:55:25 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Apr-25 02:55:25 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Apr-25 02:55:25 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-25 02:55:25 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:55:25 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:55:25 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:55:25 LOG2 antvel: Parameters to Doppler: Topocentric 24925 2008 116 0.0 2008-Apr-25 02:55:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:55:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-25 02:55:25 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-25 02:55:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:55:25 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:55:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:55:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-25 02:55:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:55:25 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-25 02:55:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:55:25 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.717522 2008.3179242084316 18.999933 2008-Apr-25 02:55:25 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777821 32.241722222222251 2008-Apr-25 02:55:25 LOG4 log_alfabeam: ALFABEAM 1 16.641995255076996 32.138562263925614 2008-Apr-25 02:55:25 LOG4 log_alfabeam: ALFABEAM 2 16.647005898808551 32.213143771403466 2008-Apr-25 02:55:25 LOG4 log_alfabeam: ALFABEAM 3 16.645075331553954 32.316435327477443 2008-Apr-25 02:55:25 LOG4 log_alfabeam: ALFABEAM 4 16.638035690523907 32.344834857029674 2008-Apr-25 02:55:25 LOG4 log_alfabeam: ALFABEAM 5 16.633015104197941 32.269657637499172 2008-Apr-25 02:55:25 LOG4 log_alfabeam: ALFABEAM 6 16.635043944250988 32.166680189267581 2008-Apr-25 02:55:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600054 2008-Apr-25 02:55:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:55:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:55:26 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-25 02:55:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:55:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:55:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24927.00 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:55:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:55:37 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Apr-25 02:55:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:55:37 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Apr-25 02:55:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-25 02:55:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-25 02:55:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-25 02:55:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:55:37 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-25 02:55:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:55:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-25 02:55:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:55:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:55:37 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Apr-25 02:55:37 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Apr-25 02:55:37 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Apr-25 02:55:37 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-25 02:55:37 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:55:37 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:55:37 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:55:37 LOG2 antvel: Parameters to Doppler: Topocentric 24937 2008 116 0.0 2008-Apr-25 02:55:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:55:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-25 02:55:37 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-25 02:55:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:55:37 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:55:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:55:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:55:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:55:37 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-25 02:55:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:55:37 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.720864 2008.3179245886886 18.999933 2008-Apr-25 02:55:37 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777792 32.241722222222236 2008-Apr-25 02:55:37 LOG4 log_alfabeam: ALFABEAM 1 16.642023242410534 32.138648921764300 2008-Apr-25 02:55:37 LOG4 log_alfabeam: ALFABEAM 2 16.647013634765127 32.213449172089952 2008-Apr-25 02:55:37 LOG4 log_alfabeam: ALFABEAM 3 16.645054985503002 32.316655655026793 2008-Apr-25 02:55:37 LOG4 log_alfabeam: ALFABEAM 4 16.638007659401964 32.344747131888788 2008-Apr-25 02:55:37 LOG4 log_alfabeam: ALFABEAM 5 16.633007569291237 32.269350865110525 2008-Apr-25 02:55:37 LOG4 log_alfabeam: ALFABEAM 6 16.635064344263363 32.166462718082613 2008-Apr-25 02:55:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600055 2008-Apr-25 02:55:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:55:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:55:38 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-25 02:55:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:55:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-25 02:55:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24939.00 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.491 > 1.4)! 2008-Apr-25 02:55:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.296 1.285 1.227 1.217 2008-Apr-25 02:55:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.430 1.369 1.399 1.491 2008-Apr-25 02:55:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.323 1.396 1.444 1.238 2008-Apr-25 02:55:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.461 1.475 1.281 1.311 2008-Apr-25 02:55:44 INFO5 check_wapp_levels: WAPP power levels are between 1.216 and 1.492 (still bad) 2008-Apr-25 02:55:46 INFO5 check_wapp_levels: WAPP power levels are between 1.218 and 1.492 (still bad) 2008-Apr-25 02:55:48 INFO5 check_wapp_levels: WAPP power levels are between 1.218 and 1.492 (still bad) 2008-Apr-25 02:55:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:55:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:55:49 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Apr-25 02:55:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:55:49 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Apr-25 02:55:49 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Apr-25 02:55:49 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Apr-25 02:55:49 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-25 02:55:49 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:55:49 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31792 J 2008-Apr-25 02:55:49 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:55:49 LOG2 antvel: Parameters to Doppler: Topocentric 24949 2008 116 0.0 2008-Apr-25 02:55:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:55:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-25 02:55:49 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-25 02:55:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:55:49 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:55:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:55:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:55:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:55:49 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-25 02:55:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:55:49 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.724207 2008.3179249689456 18.999933 2008-Apr-25 02:55:49 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777814 32.241722222222236 2008-Apr-25 02:55:49 LOG4 log_alfabeam: ALFABEAM 1 16.642051202072249 32.138736790212796 2008-Apr-25 02:55:49 LOG4 log_alfabeam: ALFABEAM 2 16.647021286795127 32.213754867039206 2008-Apr-25 02:55:49 LOG4 log_alfabeam: ALFABEAM 3 16.645034582286399 32.316875060236789 2008-Apr-25 02:55:49 LOG4 log_alfabeam: ALFABEAM 4 16.637979656627046 32.344658195063808 2008-Apr-25 02:55:49 LOG4 log_alfabeam: ALFABEAM 5 16.633000119095133 32.269043813870631 2008-Apr-25 02:55:49 LOG4 log_alfabeam: ALFABEAM 6 16.635084799738785 32.166246173604705 2008-Apr-25 02:55:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600056 2008-Apr-25 02:55:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:55:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:55:50 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-25 02:55:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:55:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-25 02:55:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:55:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:55:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24951.00 2008-Apr-25 02:55:51 INFO5 check_wapp_levels: WAPP power levels are between 1.217 and 1.492 (still bad) 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:55:53 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.484 (still bad) 2008-Apr-25 02:55:55 INFO5 check_wapp_levels: WAPP power levels are between 1.213 and 1.485 (still bad) 2008-Apr-25 02:55:57 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.484 (still bad) 2008-Apr-25 02:55:59 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.484 (still bad) 2008-Apr-25 02:56:01 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.483 (still bad) 2008-Apr-25 02:56:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:56:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:56:01 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Apr-25 02:56:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:56:01 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Apr-25 02:56:01 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Apr-25 02:56:01 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Apr-25 02:56:01 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-25 02:56:01 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:56:01 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31793 J 2008-Apr-25 02:56:01 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:56:01 LOG2 antvel: Parameters to Doppler: Topocentric 24961 2008 116 0.0 2008-Apr-25 02:56:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:56:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-25 02:56:01 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-25 02:56:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:56:01 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:56:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:56:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:01 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:56:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:56:01 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-25 02:56:01 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:56:01 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.727549 2008.3179253492026 18.999933 2008-Apr-25 02:56:01 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777807 32.241722222222251 2008-Apr-25 02:56:01 LOG4 log_alfabeam: ALFABEAM 1 16.642079116495271 32.138825812299984 2008-Apr-25 02:56:01 LOG4 log_alfabeam: ALFABEAM 2 16.647028850192012 32.214060663381183 2008-Apr-25 02:56:01 LOG4 log_alfabeam: ALFABEAM 3 16.645014134828958 32.317093406170578 2008-Apr-25 02:56:01 LOG4 log_alfabeam: ALFABEAM 4 16.637951699793732 32.344568104235513 2008-Apr-25 02:56:01 LOG4 log_alfabeam: ALFABEAM 5 16.632992758181295 32.268736677526491 2008-Apr-25 02:56:01 LOG4 log_alfabeam: ALFABEAM 6 16.635105297720060 32.166030690868666 2008-Apr-25 02:56:01 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600057 2008-Apr-25 02:56:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:56:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:56:02 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-25 02:56:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:56:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-25 02:56:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24963.00 2008-Apr-25 02:56:03 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.483 (still bad) 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:05 INFO5 check_wapp_levels: WAPP power levels are between 1.211 and 1.482 (still bad) 2008-Apr-25 02:56:07 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.483 (still bad) 2008-Apr-25 02:56:09 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.483 (still bad) 2008-Apr-25 02:56:11 INFO5 check_wapp_levels: WAPP power levels are between 1.212 and 1.482 (still bad) 2008-Apr-25 02:56:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:56:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:56:13 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Apr-25 02:56:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:56:13 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Apr-25 02:56:13 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Apr-25 02:56:13 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Apr-25 02:56:13 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-25 02:56:13 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:56:13 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31793 J 2008-Apr-25 02:56:13 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:56:13 LOG2 antvel: Parameters to Doppler: Topocentric 24973 2008 116 0.0 2008-Apr-25 02:56:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:56:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-25 02:56:13 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-25 02:56:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:56:13 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:56:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:56:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:56:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:56:13 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-25 02:56:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:56:13 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.730892 2008.3179257294598 18.999933 2008-Apr-25 02:56:13 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777821 32.241722222222236 2008-Apr-25 02:56:13 LOG4 log_alfabeam: ALFABEAM 1 16.642107001549636 32.138916036796253 2008-Apr-25 02:56:13 LOG4 log_alfabeam: ALFABEAM 2 16.647036329361455 32.214366734128348 2008-Apr-25 02:56:13 LOG4 log_alfabeam: ALFABEAM 3 16.644993631616501 32.317310817918404 2008-Apr-25 02:56:13 LOG4 log_alfabeam: ALFABEAM 4 16.637923773008495 32.344476810064279 2008-Apr-25 02:56:13 LOG4 log_alfabeam: ALFABEAM 5 16.632985482251001 32.268429282326977 2008-Apr-25 02:56:13 LOG4 log_alfabeam: ALFABEAM 6 16.635125849751255 32.165816146306895 2008-Apr-25 02:56:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600058 2008-Apr-25 02:56:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:56:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:56:14 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-25 02:56:14 INFO5 check_wapp_levels: WAPP power levels are between 1.213 and 1.481 (still bad) 2008-Apr-25 02:56:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:56:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-25 02:56:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24975.00 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:16 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.476 (still bad) 2008-Apr-25 02:56:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:18 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.477 (still bad) 2008-Apr-25 02:56:20 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.475 (still bad) 2008-Apr-25 02:56:22 INFO5 check_wapp_levels: WAPP power levels are between 1.201 and 1.476 (still bad) 2008-Apr-25 02:56:24 INFO5 check_wapp_levels: WAPP power levels are between 1.202 and 1.476 (still bad) 2008-Apr-25 02:56:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:56:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:56:25 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Apr-25 02:56:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:56:25 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Apr-25 02:56:25 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Apr-25 02:56:25 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Apr-25 02:56:25 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-25 02:56:25 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:56:25 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31793 J 2008-Apr-25 02:56:25 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:56:25 LOG2 antvel: Parameters to Doppler: Topocentric 24985 2008 116 0.0 2008-Apr-25 02:56:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:56:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-25 02:56:25 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-25 02:56:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:56:25 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:56:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:56:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:25 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:56:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:56:25 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-25 02:56:25 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:56:25 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.734234 2008.3179261097168 18.999933 2008-Apr-25 02:56:25 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777821 32.241722222222236 2008-Apr-25 02:56:25 LOG4 log_alfabeam: ALFABEAM 1 16.642134839722612 32.139007405121852 2008-Apr-25 02:56:25 LOG4 log_alfabeam: ALFABEAM 2 16.647043719716212 32.214672886183443 2008-Apr-25 02:56:25 LOG4 log_alfabeam: ALFABEAM 3 16.644973085640288 32.317527159934698 2008-Apr-25 02:56:25 LOG4 log_alfabeam: ALFABEAM 4 16.637895893810832 32.344384371840093 2008-Apr-25 02:56:25 LOG4 log_alfabeam: ALFABEAM 5 16.632978295755542 32.268121822223073 2008-Apr-25 02:56:25 LOG4 log_alfabeam: ALFABEAM 6 16.635146442811077 32.165602673558851 2008-Apr-25 02:56:25 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600059 2008-Apr-25 02:56:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:56:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:56:26 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-25 02:56:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:56:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-25 02:56:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:26 INFO5 check_wapp_levels: WAPP power levels are between 1.200 and 1.476 (still bad) 2008-Apr-25 02:56:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24987.00 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:28 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.471 (still bad) 2008-Apr-25 02:56:30 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.471 (still bad) 2008-Apr-25 02:56:32 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.469 (still bad) 2008-Apr-25 02:56:34 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.470 (still bad) 2008-Apr-25 02:56:36 INFO5 check_wapp_levels: WAPP power levels are between 1.182 and 1.472 (still bad) 2008-Apr-25 02:56:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:56:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:56:37 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Apr-25 02:56:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:56:37 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Apr-25 02:56:37 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Apr-25 02:56:37 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Apr-25 02:56:37 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-25 02:56:37 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:56:37 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31793 J 2008-Apr-25 02:56:37 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:56:37 LOG2 antvel: Parameters to Doppler: Topocentric 24997 2008 116 0.0 2008-Apr-25 02:56:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:56:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-25 02:56:37 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-25 02:56:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:56:37 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:56:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:56:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:37 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:56:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:56:37 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-25 02:56:37 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:56:37 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.737577 2008.3179264899738 18.999933 2008-Apr-25 02:56:37 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777782 32.241722222222236 2008-Apr-25 02:56:37 LOG4 log_alfabeam: ALFABEAM 1 16.642162646848188 32.139099967254104 2008-Apr-25 02:56:37 LOG4 log_alfabeam: ALFABEAM 2 16.647051025574481 32.214979292772639 2008-Apr-25 02:56:37 LOG4 log_alfabeam: ALFABEAM 3 16.644952485333608 32.317742556310520 2008-Apr-25 02:56:37 LOG4 log_alfabeam: ALFABEAM 4 16.637868046343758 32.344290739015669 2008-Apr-25 02:56:37 LOG4 log_alfabeam: ALFABEAM 5 16.632971194484334 32.267814123264870 2008-Apr-25 02:56:37 LOG4 log_alfabeam: ALFABEAM 6 16.635167088494246 32.165390150059885 2008-Apr-25 02:56:37 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600060 2008-Apr-25 02:56:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:56:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:56:38 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-25 02:56:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:56:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-25 02:56:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24999.00 2008-Apr-25 02:56:39 INFO5 check_wapp_levels: WAPP power levels are between 1.181 and 1.471 (still bad) 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:41 INFO5 check_wapp_levels: WAPP power levels are between 1.175 and 1.471 (still bad) 2008-Apr-25 02:56:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.473 > 1.4)! 2008-Apr-25 02:56:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.255 1.271 1.175 1.197 2008-Apr-25 02:56:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.408 1.326 1.338 1.459 2008-Apr-25 02:56:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.370 1.349 1.193 2008-Apr-25 02:56:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.444 1.473 1.265 1.308 2008-Apr-25 02:56:45 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.471 (still bad) 2008-Apr-25 02:56:47 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.471 (still bad) 2008-Apr-25 02:56:49 INFO5 check_wapp_levels: WAPP power levels are between 1.176 and 1.469 (still bad) 2008-Apr-25 02:56:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:56:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:56:49 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Apr-25 02:56:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:56:49 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Apr-25 02:56:49 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Apr-25 02:56:49 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Apr-25 02:56:49 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-25 02:56:49 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:56:49 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31793 J 2008-Apr-25 02:56:49 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:56:49 LOG2 antvel: Parameters to Doppler: Topocentric 25009 2008 116 0.0 2008-Apr-25 02:56:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:56:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-25 02:56:49 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-25 02:56:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:56:49 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:56:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:56:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:49 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-25 02:56:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-25 02:56:49 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-25 02:56:49 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-25 02:56:49 LOG5 log_alfabeam: Parameters: 16.640027777777778 32.241722222222229 16.740919 2008.3179268702308 18.999933 2008-Apr-25 02:56:49 LOG4 log_alfabeam: ALFABEAM 0 16.640027777777803 32.241722222222236 2008-Apr-25 02:56:49 LOG4 log_alfabeam: ALFABEAM 1 16.642190405470281 32.139193663019583 2008-Apr-25 02:56:49 LOG4 log_alfabeam: ALFABEAM 2 16.647058242468884 32.215285760601546 2008-Apr-25 02:56:49 LOG4 log_alfabeam: ALFABEAM 3 16.644931843752463 32.317956872907203 2008-Apr-25 02:56:49 LOG4 log_alfabeam: ALFABEAM 4 16.637840248089400 32.344195972475184 2008-Apr-25 02:56:49 LOG4 log_alfabeam: ALFABEAM 5 16.632964182768095 32.267506379576808 2008-Apr-25 02:56:49 LOG4 log_alfabeam: ALFABEAM 6 16.635187773717707 32.165178708039321 2008-Apr-25 02:56:49 INFO2 take_spectra: Starting WAPP+GALFA scan: 811600061 2008-Apr-25 02:56:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-25 02:56:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-25 02:56:50 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-25 02:56:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-25 02:56:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-25 02:56:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:56:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:56:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25011.00 2008-Apr-25 02:56:51 INFO5 check_wapp_levels: WAPP power levels are between 1.175 and 1.469 (still bad) 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2008-Apr-25 02:56:53 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.471 (still bad) 2008-Apr-25 02:56:55 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.468 (still bad) 2008-Apr-25 02:56:57 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.469 (still bad) 2008-Apr-25 02:56:59 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.469 (still bad) 2008-Apr-25 02:57:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-25 02:57:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-25 02:57:01 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-Apr-25 02:57:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-25 02:57:01 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Apr-25 02:57:01 INFO2 smartfreq: Switching off CAL 2008-Apr-25 02:57:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-25 02:57:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-25 02:57:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-25 02:57:01 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-25 02:57:01 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.468 (still bad) 2008-Apr-25 02:57:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-25 02:57:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-25 02:57:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-25 02:57:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-25 02:57:01 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Apr-25 02:57:01 INFO3 restore_frequencies: Restoring original frequencies 2008-Apr-25 02:57:01 LOG5 antvel: Calling 'antvel 163824.100000 321430.200000 J 0' 2008-Apr-25 02:57:01 LOG2 antvel: Precessing RA = 16:38:24.1 Dec = +32:14:30.2 Epoch = 2008.31793 J 2008-Apr-25 02:57:01 LOG2 antvel: Computed apparent RA = 16:38:44.9 Dec = +32:13:13.0 2008-Apr-25 02:57:01 LOG2 antvel: Parameters to Doppler: Topocentric 25021 2008 116 0.0 2008-Apr-25 02:57:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-25 02:57:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Apr-25 02:57:01 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Apr-25 02:57:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-25 02:57:01 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-25 02:57:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 02:57:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:57:01 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-25 02:57:01 LOG5 finish_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-25 02:57:01 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-25 02:57:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 02:57:01 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-25 02:57:01 LOG5 end_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Apr-25 02:57:01 NOTE run_command_file: DONE with command file processing 2008-Apr-25 02:57:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-25 02:57:02 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-Apr-25 02:57:02 LOG5 finish_task: Level: (1) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-25 02:57:02 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-Apr-25 02:57:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-25 02:57:02 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-Apr-25 02:57:02 LOG5 end_task: Level: (1) ID = <10236> Status = 0 0 0 0 ok 2008-Apr-25 02:57:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-25 02:57:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-25 02:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:57:33 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-25 02:57:33 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-25 02:57:33 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-Apr-25 02:57:33 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-Apr-25 02:57:33 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-25 02:57:33 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-25 02:57:33 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-25 02:57:33 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-25 02:57:33 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-Apr-25 02:57:33 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Apr-25 02:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-25 02:57:35 LOG3 exec_msg: Closing socket