Links:
Configuring amps
Editing amps
Misc

---

---

Configuring Amp (Addresses, etc)

type	Original	Current	Menu
IpAdr Conroller	192.168.1.100	192.231.95.136	17.10,.11.,.12,.13 192,231,95,136
SubNetMask	255.255.255.0	255.255.255.0	17.14->17.17
Gateway	192.168.1.254	192.231.95.223	17.18->17.21
sntpServ	192.168.0.101	192.65.176.15	update from web server
webServ	http://192.168.1.100	http://192.168.95.136	usr:root, passwd: xxxxxxxx
baud	0 (def)		17.04 0-def,1-10mbit, 2 100mbit
dhcp	0 def (off)	0	17.05.. 0 off , 1 on.
packets/sec			17.06. neg --> error or initializing.
macAdr	00:0d:1e3:00:3a:8d

---

Editing in amps (top)

• Amp Display menu
  
• top line
• left status or menu and parameter number
• right parameter values
• 2nd line
• parameter name
• 3rd line
• help value
• Display Menu:
• mode button:
• switch modes:
• parameter view
• arrows up,down selects parameter
• arrows left,right, select menu
  
• parameter edit
• arrows up,down increase, decrease parameter value
• arrows left,right: select different digit to modify
• parameter access level
• 00:49
• 0 only access menu 00
• 1 acceses to all menus.
  
• status
• Security:
• 00.34: enter value 1 to 999. this will be the security code, then press M
• To activate security:
• 00.49 .. set to Loc, then reset
• Disabling security
• 00.34,  set to 0, then reset.
  

• Reseting sm-ethernet (updating config)
• 17.32   ste o on
• reset
• Saving params to drive:
• 17.00    write 1000
• press red reset button
  

---

Misc (top)

• AO computer to talk to patriot drives.
• dual ethernet
  
• 1 for drives
• 1 for outside world
• Dual boot.
• Want linux for our program
• Want windows for patriot hmi program.
• ntp server.
• For now run from ntp0 .. we've got drive configured for this.